PLA110 Single Pole, Normally Open OptoMOS(R) Relay Parameters Blocking Voltage Load Current Max On-resistance Ratings 400 Units VP 150 22 mA Description PLA110 is a normally open (1-Form-A) solid state relay that uses optically coupled MOSFET technology to provide 3750Vrms of input to output isolation. The efficient MOSFET switches and photovoltaic die use Clare's patented OptoMOS architecture. The optically coupled output is controlled by a highly efficient GaAIAs infrared LED. Features * 3750Vrms Input to Output Isolation * Small 6-Pin Package * Low Drive Power Requirements (TTL/CMOS Compatible) * No Moving Parts * High Reliability * Arc-Free With No Snubbing Circuits * No EMI/RFI Generation * FCC Compatible * VDE Compatible * Machine Insertable, Wave Solderable The PLA110 can be used to replace mechanical relays, and offers the superior reliability associated with semiconductor devices. Because it has no moving parts, it offers faster, bounce-free switching in a more compact surface mount or thru-hole package. Approvals * UL Recognized Component: File E76270 * CSA Certified Component: Certificate 1175739 * EN/IEC 60950-1 Certified Component: TUV Certificate B 09 07 49410 004 Applications * Telecommunications * Telecom Switching * Tip/Ring Circuits * Modem Switching (Laptop, Notebook, PocketSize) * Hook Switch * Dial Pulsing * Ground Start * Ringing Injection * Instrumentation * Multiplexers * Data Acquisition * Electronic Switching * I/O Subsystems * Meters (Watt-Hour, Water, Gas) * Medical Equipment Patient/Equipment Isolation * Security * Aerospace * Industrial Controls Ordering Information Part # PLA110 PLA110S PLA110STR Description 6-Lead DIP (50/Tube) 6-Lead Surface Mount (50/Tube) 6-Lead Surface Mount (1000/Reel) Pin Configuration AC/DC Configuration + Control - Control NC 1 6 2 5 3 4 Load Do Not Use Load DC Only Configuration + Control - Control NC 1 6 2 5 3 4 + Load - Load Switching Characteristics of Normally Open Devices Form-A IF 90% Pb RoHS 2002/95/EC DS-PLA110-R06 e3 10% ILOAD ton www.clare.com toff 1 PLA110 Absolute Maximum Ratings @ 25C Parameter Blocking Voltage Reverse Input Voltage Input Control Current Peak (10ms) Input Power Dissipation 1 Total Package Dissipation 2 Isolation Voltage, Input to Output Operational Temperature Storage Temperature 1 Derate Linearly 1.33 mW / C 2 Derate Linearly 6.67 mW / C Min 3750 -40 -40 Max 400 5 50 1 150 800 +85 +125 Units VP V mA A mW mW Vrms C C Absolute Maximum Ratings are stress ratings. Stresses in excess of these ratings can cause permanent damage to the device. Functional operation of the device at conditions beyond those indicated in the operational sections of this data sheet is not implied. Electrical Characteristics @ 25C Parameters Output Characteristics Load Current Continuous, AC/DC Configuration Continuous, DC Configuration Peak On-Resistance AC/DC Configuration DC Configuration Off-State Leakage Current Switching Speeds Turn-On Turn-Off Output Capacitance Input Characteristics Input Control Current Input Dropout Current Input Voltage Drop Reverse Input Current Common Characteristics Input to Output Capacitance 2 Conditions Symbol Min Typ Max - - 150 250 400 ILEAK - - 22 7 1 VL=50V, f=1MHz ton toff COUT - 25 1 0.5 - IL=150mA IF=5mA VR=5V IF IF VF IR 0.4 0.9 - 0.7 1.2 - 5 1.4 10 mA mA V A - CI/O - 3 - pF t=10ms IL ILPK IL=150mA IL=250mA VL=400VP IF=5mA, VL=10V RON www.clare.com Units mA A ms pF R06 PLA110 PERFORMANCE DATA* 25 20 20 15 10 5 0 0.26 0.29 0.32 0.35 Typical On-Resistance Distribution (N=50, IF=5mA, IL=150mADC, TA=25C) 30 15 10 5 25 20 15 10 5 0 0.38 0.12 0.17 0.22 0.27 0.32 15 0.37 16 17 18 19 20 Turn-Off (ms) Turn-Off (ms) On-Resistance () Typical IF for Switch Operation (N=50, IL=150mADC, TA=25C) Typical IF for Switch Dropout (N=50, TA=25C) Typical Blocking Voltage Distribution (N=50, TA=25C) 25 15 10 5 35 30 20 Device Count (N) 20 Device Count (N) 15 10 5 0.75 1.05 1.35 1.65 1.95 25 20 15 10 5 0 0 0 0.75 2.25 1.05 1.35 1.65 1.95 2.25 441.5 450.5 459.5 468.5 477.5 LED Current (mA) LED Current (mA) Blocking Voltage (VP) Typical LED Forward Voltage Drop (N=50, IF=5mA, TA=25C) Typical Turn-On vs. LED Forward Current (IL=150mADC) Typical Turn-Off vs. LED Forward Current (IL=150mADC) 0.40 35 0.12 0.35 Turn-On (ms) 25 20 15 10 486.5 0.10 0.30 Turn-Off (ms) 30 0.25 0.20 0.15 0.08 0.06 0.04 0.10 5 0.02 0.05 0 0 0 1.17 1.19 1.21 1.23 0 1.25 5 10 15 20 25 30 35 40 0 50 45 5 10 15 20 25 30 35 40 45 LED Forward Voltage Drop (V) Forward Current (mA) Forward Current (mA) Typical LED Forward Voltage Drop vs. Temperature Typical Turn-On vs. Temperature (IL=100mADC) Typical Turn-Off vs. Temperature (IF=5mA, IL=100mADC) 0.6 1.8 1.4 IF=50mA 1.2 IF=10mA IF=5mA 1.0 0.8 Turn-On (ms) 1.6 0.3 0.4 IF=10mA 0.3 0.2 0.1 -20 0 20 40 60 Temperature (C) 80 100 120 0.25 0.2 0.15 0.1 0.05 0 0 -40 50 0.35 IF=5mA 0.5 Turn-Off (ms) Device Count (N) 25 Device Count (N) 35 0 0.23 LED Forward Voltage Drop (V) Typical Turn-Off Time (N=50, IF=5mA, IL=100mADC, TA=25C) Device Count (N) 25 Device Count (N) Device Count (N) Typical Turn-On Time (N=50, IF=5mA, IL=100mADC, TA=25C) -40 -20 0 20 40 60 80 Temperature (C) 100 120 -40 -20 0 20 40 60 80 100 Temperature (C) *The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. R06 www.clare.com 3 PLA110 PERFORMANCE DATA* Typical IF for Switch Operation vs. Temperature (IL=100mADC) 3.0 3.0 1.5 1.0 Load Current (mA) LED Current (mA) 2.0 1.5 1.0 -40 -20 0 20 40 60 80 -40 100 100 50 0 -50 -150 -2.5 -2.0 -1.5 -1.0 -0.5 0 0 Typical Load Current vs. Load Voltage (IF=5mA, TA=25C) -100 0.5 -20 0 20 40 60 80 100 0 0.5 1.0 1.5 2.0 2.5 Temperature (C) Temperature (C) Load Voltage (V) Typical On-Resistance vs. Temperature AC/DC Configuration (IL=150mADC) Typical On-Resistance vs. Temperature - DC Configuration (IL=150mADC) Typical On Resistance vs. Temperature (IF=5mA; IL=100mA Instantaneous) 10 20 IF=10mA 15 10 5 On-Resistance () IF=5mA IF=10mA 7 6 0 -40 -20 0 20 40 60 80 -40 100 -20 0 20 40 60 80 Temperature (C) Temperature (C) Typical Load Current vs. Temperature (N=50, TA=25C) Typical Blocking Voltage vs. Temperature 300 Blocking Voltage (VP) DC Configuration 200 150 8 5 0 250 25 IF=5mA 9 On-Resistance () 25 IF=10mA IF=5mA AC/DC Configuration IF=10mA IF=5mA 100 50 -40 -20 0 20 40 60 80 100 15 10 5 -40 0.035 475 0.030 470 465 460 455 20 40 60 80 100 120 0.025 0.020 0.015 0.010 0.005 -40 -20 0 20 40 60 80 100 0 -40 -20 0 20 40 60 80 100 Temperature (C) Temperature (C) Temperature (C) 0 Typical Leakage vs. Temperature Measured across Pins 4&6 480 120 -20 Temperature (C) 450 0 20 0 100 Leakage (A) LED Current (mA) 2.0 0.5 On-Resistance () 150 2.5 2.5 Load Current (mA) Typical IF for Switch Dropout vs. Temperature (IL=100mADC) Energy Rating Curve 1.2 Load Current (A) 1.0 0.8 0.6 0.4 0.2 0 10s 100s 1ms 10ms 100ms 1s 10s 100s Time *The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. 4 www.clare.com R06 PLA110 Manufacturing Information Moisture Sensitivity All plastic encapsulated semiconductor packages are susceptible to moisture ingression. Clare classified all of its plastic encapsulated devices for moisture sensitivity according to the latest version of the joint industry standard, IPC/JEDEC J-STD-020, in force at the time of product evaluation. We test all of our products to the maximum conditions set forth in the standard, and guarantee proper operation of our devices when handled according to the limitations and information in that standard as well as to any limitations set forth in the information or standards referenced below. Failure to adhere to the warnings or limitations as established by the listed specifications could result in reduced product performance, reduction of operable life, and/or reduction of overall reliability. This product carries a Moisture Sensitivity Level (MSL) rating as shown below, and should be handled according to the requirements of the latest version of the joint industry standard IPC/JEDEC J-STD-033. Device Moisture Sensitivity Level (MSL) Rating PLA110 / PLA110S MSL 1 ESD Sensitivity This product is ESD Sensitive, and should be handled according to the industry standard JESD-625. Reflow Profile This product has a maximum body temperature and time rating as shown below. All other guidelines of J-STD-020 must be observed. Device Maximum Temperature x Time PLA110 / PLA110S 250C for 30 seconds Board Wash Clare recommends the use of no-clean flux formulations. However, board washing to remove flux residue is acceptable. Since Clare employs the use of silicone coating as an optical waveguide in many of its optically isolated products, the use of a short drying bake could be necessary if a wash is used after solder reflow processes. Chlorine- or Fluorine-based solvents or fluxes should not be used. Cleaning methods that employ ultrasonic energy should not be used. Pb R06 RoHS 2002/95/EC e3 www.clare.com 5 PLA110 MECHANICAL DIMENSIONS PLA110 8.382 0.381 (0.330 0.015) PCB Hole Pattern 7.239 TYP (0.285 TYP) 2.54 0.127 (0.100 0.005) 6 - 0.800 DIA. (6 - 0.031 DIA.) 9.144 0.508 (0.360 0.020) 6.350 0.127 (0.250 0.005) 2.540 0.127 (0.100 0.005) 7.620 0.127 (0.300 0.005) 7.620 0.254 (0.300 0.010) 1.651 0.254 (0.065 0.010) 3.302 0.051 (0.130 0.002) 0.254 0.0127 (0.010 0.0005) 6.350 0.127 (0.250 0.005) 5.080 0.127 (0.200 0.005) 4.064 TYP (0.160 TYP) Dimensions mm (inches) 0.457 0.076 (0.018 0.003) PLA110S 8.382 0.381 (0.330 0.015) 9.524 0.508 (0.375 0.020) 0.635 0.127 (0.025 0.005) PCB Land Pattern 2.54 0.127 (0.100 0.005) 2.54 (0.10) 6.350 0.127 (0.250 0.005) 0.457 0.076 (0.018 0.003) 1.651 0.254 (0.065 0.010) 7.620 0.254 (0.300 0.010) 0.254 0.0127 (0.010 0.0005) 8.90 (0.3503) 1.65 (0.0649) 0.65 (0.0255) 3.302 0.051 (0.130 0.002) 4.445 0.254 (0.175 0.010) Dimensions mm (inches) 1.651 0.254 (0.065 0.010) 6 www.clare.com R06 PLA110 PLA110S Tape & Reel 330.2 Dia (13.00 Dia) Top Cover Tape Thickness 0.102 Max (0.004 Max) W=16.00 (0.63) B0 = 10.10 (0.398) K0 = 4.90 (0.19) K1 = 3.80 (0.15) P = 12.00 (0.472) User Direction of Feed Embossed Carrier Embossment A0 = 10.10 (0.398) Dimensions mm (inches) NOTES: 1. All dimensions carry tolerances of EIA Standard 481-2 2. The tape complies with all "Notes" for constant dimensions listed on page 5 of EIA-481-2 For additional information please visit our website at: www.clare.com Clare, Inc. makes no representations or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications and product descriptions at any time without notice. Neither circuit patent licenses nor indemnity are expressed or implied. Except as set forth in Clare's Standard Terms and Conditions of Sale, Clare, Inc. assumes no liability whatsoever, and disclaims any express or implied warranty, relating to its products including, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right. The products described in this document are not designed, intended, authorized or warranted for use as components in systems intended for surgical implant into the body, or in other applications intended to support or sustain life, or where malfunction of Clare's product may result in direct physical harm, injury, or death to a person or severe property or environmental damage. Clare, Inc. reserves the right to discontinue or make changes to its products at any time without notice. 7 Specification: DS-PLA110-R06 (c)Copyright 2010, Clare, Inc. All rights reserved. Printed in USA. 8/6/2010