LCA211 COMMON INPUT OptoMOS(R) Relay Load Voltage Load Current Max RON LCA211 350 85 35 Description LCA211 is a 350V, 85mA, 35 single input/dual output relay. It features fast 1.2ms switching for high speed applications where two independent outputs are driven by a common input. Units V mA Features * Small 8 Pin DIP Package * Low Drive Power Requirements (TTL/CMOS Compatible) * No Moving Parts * High Reliability * Arc-Free With No Snubbing Circuits * 3750VRMS Input/Output Isolation * FCC Compatible * VDE Compatible * No EMI/RFI Generation * Machine Insertable, Wave Solderable * Surface Mount and Tape & Reel Versions Available Applications * Telecommunications * Telecom Switching * Tip/Ring Circuits * Modem Switching (Laptop, Notebook, Pocket Size) * Hookswitch * Dial Pulsing * Ground Start * Ringer Injection * Instrumentation * Multiplexers * Data Acquisition * Electronic Switching * I/O Subsystems * Meters (Watt-Hour, Water, Gas) * Medical Equipment-Patient/Equipment Isolation * Security * Aerospace * Industrial Controls Approvals * UL Recognized: File Number E76270 * CSA Certified: File Number LR 43639-10 * BSI Certified: * BS EN 60950:1992 (BS7002:1992) Certificate #:7344 * BS EN 41003:1993 Certificate #:7344 Ordering Information Part # LCA211 LCA211S LCA211STR Description 8 Pin DIP (50/Tube) 8 Pin Surface Mount (50/Tube) 8 Pin Surface Mount (1000/Reel) Pin Configuration LCA211 Pinout AC/DC Configuration Do Not Use + Control - Control Do Not Use 1 8 2 7 3 6 4 5 Switching Characteristics of Normally Open (Form A) Devices 10%+ Output 2 10ms 90% + 10%+ TON www.clare.com Output 2 CONTROL + 90% DS-LCA211-R6 Output 1 Switching Characteristics of Normally Closed (Form B) Devices 10ms CONTROL LOAD Output 1 TOFF + 90% +10% TOFF TON 1 LCA211 Absolute Maximum Ratings (@ 25 C) Parameter Min Input Power Dissipation - - 1501 mW Input Control Current Peak (10ms) - - 50 1 mA A Reverse Input Voltage - - 5 V - - 8002 mW Total Power Dissipation Isolation Voltage Input to Output 3750 - - VRMS Operational Temperature -40 - +85 C Storage Temperature -40 - +125 C - - +260 +220 C C Soldering Temperature DIP Package Surface Mount Package (10 Seconds Max.) 1 Derate Linearly 1.33 mw/C 2 Derate Linearly 6.67 mw/C Absolute Maximum Ratings are stress ratings. Stresses in excess of these ratings can cause permanent damage to the device. Functional operation of the device at these or any other conditions beyond those indicated in the operational sections of this data sheet is not implied. Exposure of the device to the absolute maximum ratings for an extended period may degrade the device and effect its reliability. Typ Max Units Electrical Characteristics Parameter Conditions Symbol Min Typ Max Units - VL - - 350 V - IL - - 85 mA 10ms ILPK - - 170 mA Output Characteristics @ 25C Load Voltage (Peak) Load Current* (Continuous) AC/DC Configuration Peak Load Current On-Resistance AC/DC Configuration IL=85mA RON - 25 35 Off-State Leakage Current VL=350V ILEAK - - 1 A Switching Speeds Turn-On Turn-Off IF=8mA, VL=10V IF=8mA, VL=10V TON TOFF - - 1 1.2 ms ms Output Capacitance 50V; f=1MHz COUT - 25 - pF - - - 3 - pF Capacitance Input to Output Input Characteristics @ 25C Input Control Current IL=120mA IF 8 5 50 mA Input Dropout Current - IF 0.4 0.7 - mA IF=8mA VF 0.9 1.2 1.4 V Reverse Input Voltage - VR - - 5 V Reverse Input Current VR=5V IR - - 10 A Input Voltage Drop Common Characteristics @ 25C Input to Output Capacitance - CI/O - 3 - pF Input to Output Isolation - VI/O 3750 - - VRMS *NOTE: If both poles operate simultaneously load current must be derated so as not to exceed the package power dissipation value. 2 www.clare.com Rev. 6 LCA211 Mechanical Dimensions 9.652 .381 (.380 .015) 8 Pin DIP Through Hole (Standard) 2.540 .127 8-.800 DIA. (.100 .005) (8-.031 DIA.) 2.540 .127 (.100 .005) 7.620 .254 (.300 .010) 3.302 (.130) 7.239 TYP. (.285) PC Board Pattern (Top View) 9.144 .508 (.360 .020) 6.350 .127 (.250 .005) 9.144 TYP. (.360) .457 .076 (.018 .003) 7.620 .127 (.300 .005) 8.077 .127 (.318 .005 ) 9.652 .381 (.380 .015) 8 Pin DIP Surface Mount ("S" Suffix) 4.445 .127 (.175 .005) 3.302 (.130) (.100 .005) 9.525 .254 (.375 .010) 6.350 .127 (.250 .005) .635 TYP. (.025) PC Board Pattern (Top View) 2.540 .127 2.540 .127 (.100 .005) 7.620 .254 (.300 .010) 7.620 .127 (.300 .005) 6.350 .127 (.250 .005) 8.305 .127 (.327 .005) 1.905 .127 (.075 .005) .254 TYP. (.010) .457 .076 (.018 .003) 1.498 .127 (.059 .005) 8.077 .127 (.318 .005) Tape and Reel Packaging for 8 Pin Surface Mount Package 330.2 DIA. (13.00) Top Cover Tape Thickness .102 MAX. (.004) 6.731 MAX. 1.753 .102 (.265) (.069 .004) .406 MAX. (.016) 2.007 .102 1.498 .102 3.987 .102 (.079 .004) (.059 .004) (.157 .004) 7.493 .102 (.295 .004) 1 8 12.090 (.476) 10.300 (.405) 4.877 (.192) Top Cover Tape Embossed Carrier 16.002 .305 (.630 .012) .050R TYP. 11.989 .102 (.472 .004) 10.300 .102 (.405 .004) 1.549 .102 (.061 .004) User Direction of Feed Embossment Dimensions mm (inches) Rev. 6 www.clare.com 3 For additional information please visit our website at: www.clare.com Clare, Inc. makes no representations or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications and product descriptions at any time without notice. Neither circuit patent licenses nor indemnity are expressed or implied. Except as set forth in Clare's Standard Terms and Conditions of Sale, Clare, Inc. assumes no liability whatsoever, and disclaims any express or implied warranty, relating to its products including, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right. The products described in this document are not designed, intended, authorized or warranted for use as components in systems intended for surgical implant into the body, or in other applications intended to support or sustain life, or where malfunction of Clare's product may result in direct physical harm, injury, or death to a person or severe property or environmental damage. Clare, Inc. reserves the right to discontinue or make changes to its products at any time without notice. Specification: DS-LCA211-R6.0 (c)Copyright 2002, Clare, Inc. All rights reserved. Printed in USA. 6/25/02