TIP131, TIP132 (NPN), TIP137 (PNP) Preferred Devices Darlington Complementary Silicon Power Transistors Designed for general-purpose amplifier and low-speed switching applications. http://onsemi.com Features DARLINGTON 8 AMPERE COMPLEMENTARY SILICON POWER TRANSISTORS 80-100 VOLTS, 70 WATTS * High DC Current Gain - * * * * hFE = 2500 (Typ) @ IC = 4.0 Adc Collector-Emitter Sustaining Voltage - @ 30 mAdc VCEO(sus) = 80 Vdc (Min) - TIP131 = 100 Vdc (Min) - TIP132, TIP137 Low Collector-Emitter Saturation Voltage - VCE(sat) = 2.0 Vdc (Max) @ IC = 4.0 Adc = 3.0 Vdc (Max) @ IC = 6.0 Adc Monolithic Construction with Built-In Base-Emitter Shunt Resistors Pb-Free Packages are Available* IIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIII IIIIIIIIIII III III III III IIIIIIIIIII III III III III IIIIIIIIIII III III III III IIIIIIIIIII III III IIIII III III IIIIIIIIIII III IIIII III IIIIIIIIIII III IIIII III IIIIIIIIIII III IIIII III IIIIIIIIIII III IIIII III III IIIIIIIIIII III IIIII I II IIIIIIIIIIIIIIIIIII IIIIIIIIIII III IIIII III IIIIIIIIIIIIIIIIIII IIIIIIIIIII III IIIII III IIIIIIIIIII III IIIII III IIIIIIIIIII III IIIII III III IIIII IIIIIIIIIII III IIIIIIIIIII III IIIII III MARKING DIAGRAM 4 TO-220AB CASE 221A STYLE 1 MAXIMUM RATINGS Symbol TIP131 TIP132 TIP137 Unit VCEO 80 100 Vdc Collector-Base Voltage VCB 80 100 Vdc Emitter-Base Voltage VEB 5.0 Vdc IC 8.0 12 Adc Base Current IB 300 mAdc Total Power Dissipation @ TC = 25_C PD 70 W Total Power Dissipation @ TA = 25_C PD 2.0 W TJ, Tstg - 65 to + 150 _C Rating Collector-Emitter Voltage Collector Current - Continuous Peak Operating and Storage Junction, Temperature Range THERMAL CHARACTERISTICS Characteristic Symbol Max Unit Thermal Resistance, Junction-to-Case RqJC 1.78 _C/W Thermal Resistance, Junction-to-Ambient RqJA 63.5 _C/W Maximum ratings are those values beyond which device damage can occur. Maximum ratings applied to the device are individual stress limit values (not normal operating conditions) and are not valid simultaneously. If these limits are exceeded, device functional operation is not implied, damage may occur and reliability may be affected. 1 2 TIP13xG AYWW 3 TIP13x x A Y WW G = Device Code = 1, 2, or 7 = Assembly Location = Year = Work Week = Pb-Free Package ORDERING INFORMATION Device TIP131 TIP131G TIP132 TIP132G TIP137 TIP137G Package Shipping TO-220 50 Units/Rail TO-220 (Pb-Free) 50 Units/Rail TO-220 50 Units/Rail TO-220 (Pb-Free) 50 Units/Rail TO-220 50 Units/Rail TO-220 (Pb-Free) 50 Units/Rail Preferred devices are recommended choices for future use and best overall value. *For additional information on our Pb-Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. (c) Semiconductor Components Industries, LLC, 2005 August, 2005 - Rev. 1 1 Publication Order Number: TIP131/D TIP131, TIP132 (NPN), TIP137 (PNP) COLLECTOR PNP TIP137 COLLECTOR NPN TIP131 TIP132 BASE BASE 8.0 k 8.0 k 120 120 EMITTER EMITTER Figure 1. Darlington Circuit Schematic IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIII IIIII III IIII III IIIIIIIIIIIIIIIIIIIIII IIIII III IIII III IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIII IIIII III IIII III IIIIIIIIIIIIIIIIIIIIII IIIII III IIII III IIIIIIIIIIIIIIIIIIIIII IIII III IIIII III IIIIIIIIIIIIIIIIIIIIII IIIII III IIII III IIIIIIIIIIIIIIIIIIIIII IIIII IIIIIII III IIIIIIIIIIIIIIIIIIIIII III IIII III IIIII IIIIIIIIIIIIIIIIIIIIII IIIII III IIII III IIIIIIIIIIIIIIIIIIIIII IIIII III IIII III IIIIIIIIIIIIIIIIIIIIII IIIII III IIII III IIIIIIIIIIIIIIIIIIIIII IIIII IIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIII IIIII III IIII III IIIIIIIIIIIIIIIIIIIIII IIIII III IIII III IIIII IIIIIIIIIIIIIIIIIIIIII III IIII III IIIIIIIIIIIIIIIIIIIIII IIIII III IIII III IIIIIIIIIIIIIIIIIIIIII IIIII III IIII III IIIII IIIIIIIIIIIIIIIIIIIIII III IIII III IIIIIIIIIIIIIIIIIIIIII IIIII III IIII III IIIIIIIIIIIIIIIIIIIIII IIIII IIIIIIIIII ELECTRICAL CHARACTERISTICS (TC = 25_C unless otherwise noted) Characteristic Symbol Min Max 80 100 - - - - 0.5 0.5 - - 0.2 0.2 - 5.0 500 1000 - 15000 - - 2.0 3.0 - 2.5 Unit OFF CHARACTERISTICS Collector-Emitter Sustaining Voltage (Note 1) (IC = 30 mAdc, IB = 0) VCEO(sus) TIP131 TIP132, TIP137 Collector Cutoff Current (VCE = 40 Vdc, IB = 0) (VCE = 50 Vdc, IB = 0) TIP131 TIP132, TIP137 Collector Cutoff Current (VCB = 80 Vdc, IE = 0) (VCB = 100 Vdc, IE = 0) TIP131 TIP132, TIP137 Vdc ICEO mAdc ICBO Emitter Cutoff Current (VBE = 5.0 Vdc, IC = 0) IEBO mAdc mAdc ON CHARACTERISTICS (Note 1) DC Current Gain (IC = 1.0 Adc, VCE = 4.0 Vdc) (IC = 4.0 Adc, VCE = 4.0 Vdc) hFE Collector-Emitter Saturation Voltage (IC = 4.0 Adc, IB = 16 mAdc) (IC = 6.0 Adc, IB = 30 mAdc) VCE(sat) Base-Emitter On Voltage (IC = 4.0 Adc, VCE = 4.0 Vdc) VBE(on) 1. Pulse Test: Pulse Width v 300 ms, Duty Cycle v 2%. http://onsemi.com 2 - Vdc Vdc TIP131, TIP132 (NPN), TIP137 (PNP) PD, POWER DISSIPATION (WATTS) TA TC 4.0 80 3.0 60 TC 2.0 40 TA 1.0 20 0 0 0 20 40 60 80 100 T, TEMPERATURE (C) 120 140 160 r(t), TRANSIENT THERMAL RESISTANCE (NORMALIZED) Figure 2. Power Derating 1.0 0.7 0.5 D = 0.5 0.3 0.2 0.2 0.1 0.1 0.07 0.05 0.05 0.02 0.03 0.02 P(pk) ZqJC(t) = r(t) RqJC RqJC = 1.78C/W MAX D CURVES APPLY FOR POWER PULSE TRAIN SHOWN t1 READ TIME AT t1 t2 TJ(pk) - TC = P(pk) ZqJC(t) DUTY CYCLE, D = t1/t2 0.01 0.01 0.01 SINGLE PULSE 0.02 0.05 0.1 0.2 0.5 1.0 2.0 5.0 t, TIME (ms) 10 Figure 3. Thermal Response http://onsemi.com 3 20 50 100 200 500 1.0 k TIP131, TIP132 (NPN), TIP137 (PNP) PACKAGE DIMENSIONS TO-220 CASE 221A-09 ISSUE AA -T- B SEATING PLANE C F T S 4 DIM A B C D F G H J K L N Q R S T U V Z A Q 1 2 3 U H K Z L R V J NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. DIMENSION Z DEFINES A ZONE WHERE ALL BODY AND LEAD IRREGULARITIES ARE ALLOWED. G D N INCHES MIN MAX 0.570 0.620 0.380 0.405 0.160 0.190 0.025 0.035 0.142 0.147 0.095 0.105 0.110 0.155 0.018 0.025 0.500 0.562 0.045 0.060 0.190 0.210 0.100 0.120 0.080 0.110 0.045 0.055 0.235 0.255 0.000 0.050 0.045 --- --- 0.080 STYLE 1: PIN 1. 2. 3. 4. MILLIMETERS MIN MAX 14.48 15.75 9.66 10.28 4.07 4.82 0.64 0.88 3.61 3.73 2.42 2.66 2.80 3.93 0.46 0.64 12.70 14.27 1.15 1.52 4.83 5.33 2.54 3.04 2.04 2.79 1.15 1.39 5.97 6.47 0.00 1.27 1.15 --- --- 2.04 BASE COLLECTOR EMITTER COLLECTOR ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. "Typical" parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: N. American Technical Support: 800-282-9855 Toll Free Literature Distribution Center for ON Semiconductor USA/Canada P.O. Box 61312, Phoenix, Arizona 85082-1312 USA Phone: 480-829-7710 or 800-344-3860 Toll Free USA/Canada Japan: ON Semiconductor, Japan Customer Focus Center 2-9-1 Kamimeguro, Meguro-ku, Tokyo, Japan 153-0051 Fax: 480-829-7709 or 800-344-3867 Toll Free USA/Canada Phone: 81-3-5773-3850 Email: orderlit@onsemi.com http://onsemi.com 4 ON Semiconductor Website: http://onsemi.com Order Literature: http://www.onsemi.com/litorder For additional information, please contact your local Sales Representative. TIP131/D