12-215/T1D-ANPHY/3C - Everlight International Corp.

EVERLIGHT ELECTRONICS CO.,LTD.

Everlight Electronics Co., Ltd. http://www.everlight.com Rev.1 Page: 1 of 11

Device No. : SZDSE-125-T03 Prepared date: 06-Mar-2006 Prepared by: xunzhi hu

Technical Data Sheet

White Chip LED With Right Angle Lens

12-215/T1D-ANPHY/3C

Features

․Package in 8mm tape on 7〞diameter reel.

․Compatible with automatic placement equipment.

․Compatible with infrared and vapor phase reflow

solder process.

․Mono-color type.

․Pb-Free.

․The product itself will remain within RoHS compliant version

Descriptions

․The 12-215 SMD Taping is much smaller than

lead frame type components, thus enable smaller

board size, higher packing density, reduced

storage space and finally smaller equipment to be

obtained.

․Besides, lightweight makes them ideal for

miniature applications. etc.

Applications

․Telecommunication: indicator and backlighting in

telephone and fax.

․Flat backlight for LCD, switch and symbol.

․General use.

Device Selection Guide Chip

Part No. Material Emitted Color Lens Color

12-215/T1D-ANPHY/3C InGaN Pure White Yellow Diffused

EVERLIGHT ELECTRONICS CO.,LTD.

Everlight Electronics Co., Ltd. http://www.everlight.com Rev.1 Page: 2 of 11

Device No. : SZDSE-125-T03 Prepared date: 06-Mar-2006 Prepared by: xunzhi hu

12-215/T1D-ANPHY/3C

Package Outline Dimensions

0.5

Cathode mark

R0.5

0.6

1.7±

±

2.2

0.9

±

L

C

L

1.5

0.5

2.1 0.2

0.2

1.0

0.2

Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm

EVERLIGHT ELECTRONICS CO.,LTD.

Everlight Electronics Co., Ltd. http://www.everlight.com Rev.1 Page: 3 of 11

Device No. : SZDSE-125-T03 Prepared date: 06-Mar-2006 Prepared by: xunzhi hu

12-215/T1D-ANPHY/3C

Absolute Maximum Ratings (Ta=25℃)

Parameter Symbol Rating Unit

Reverse Voltage VR 5 V

Forward Current IF 25 mA

Operating Temperature Topr -40 ~ +85 ℃

Storage Temperature Tstg -40 ~ +90 ℃

Electrostatic Discharge(HBM) ESD 150 V

Power Dissipation Pd 110 mW

Peak Forward Current

(Duty 1/10 @1KHz) IFP 100 mA

Soldering Temperature Tsol Reflow Soldering : 260 ℃ for 10 sec.

Hand Soldering : 350 ℃ for 3 sec.

Electro-Optical Characteristics (Ta=25℃)

Parameter Symbol Min. Typ. Max. Unit Condition

Luminous Intensity Iv 28.5 ----- 72.0 mcd IF=5mA

Viewing Angle 2θ1/2 ----- 140 ----- deg IF=5mA

Forward Voltage VF 2.70 ----- 3.15 V IF=5mA

Reverse Current IR ----- ----- 50 μA VR=5V

Bin Range Of Luminous Intensity & Forward Voltage

Symbol Bin Code Min. Max. Unit Condition

N 28.5 45.0

IV P 45.0 72.0

mcd IF=5mA

15 2.70 2.85

16 2.85 3.00

VF

17 3.00 3.15

V IF=5mA

Notes:

1.Tolerance of Luminous Intensity ±10%

2.Tolerance of Forward Voltage ±0.1V

EVERLIGHT ELECTRONICS CO.,LTD.

Everlight Electronics Co., Ltd. http://www.everlight.com Rev.1 Page: 4 of 11

Device No. : SZDSE-125-T03 Prepared date: 06-Mar-2006 Prepared by: xunzhi hu

12-215/T1D-ANPHY/3C

Chromaticity Coordinates Specifications for Bin Grading

Groups Bin Code CIE_x CIE_y Condition

0.274 0.226

0.274 0.258

0.294 0.286

1

0.294 0.254

0.274 0.258

0.274 0.291

0.294 0.319

2

0.294 0.286

0.294 0.254

0.294 0.286

0.314 0.315

3

0.314 0.282

0.294 0.286

0.294 0.319

0.314 0.347

4

0.314 0.315

0.314 0.282

0.314 0.315

0.334 0.343

5

0.334 0.311

0.314 0.315

0.314 0.347

0.334 0.376

A

6

0.334 0.343

IF=5mA

Notes:

1.The C.I.E. 1931 chromaticity diagram ( Tolerance ±0.01 ).

2.The products are sensitive to static electricity and care must be fully taken when

handling products.

EVERLIGHT ELECTRONICS CO.,LTD.

Everlight Electronics Co., Ltd. http://www.everlight.com Rev.1 Page: 5 of 11

Device No. : SZDSE-125-T03 Prepared date: 06-Mar-2006 Prepared by: xunzhi hu

12-215/T1D-ANPHY/3C

CIE Chromaticity Diagram

EVERLIGHT ELECTRONICS CO.,LTD.

Everlight Electronics Co., Ltd. http://www.everlight.com Rev.1 Page: 6 of 11

Device No. : SZDSE-125-T03 Prepared date: 06-Mar-2006 Prepared by: xunzhi hu

12-215/T1D-ANPHY/3C

Typical Electro-Optical Characteristics Curves

EVERLIGHT ELECTRONICS CO.,LTD.

Everlight Electronics Co., Ltd. http://www.everlight.com Rev.1 Page: 7 of 11

Device No. : SZDSE-125-T03 Prepared date: 06-Mar-2006 Prepared by: xunzhi hu

12-215/T1D-ANPHY/3C

Label explanation

CAT: Luminous Intensity Rank HUE: Chromaticity Coordinates REF: Forward Voltage Rank

Reel Dimensions

Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm

RoHS

EVERLIGHT ELECTRONICS CO.,LTD.

Everlight Electronics Co., Ltd. http://www.everlight.com Rev.1 Page: 8 of 11

Device No. : SZDSE-125-T03 Prepared date: 06-Mar-2006 Prepared by: xunzhi hu

12-215/T1D-ANPHY/3C

Carrier Tape Dimensions: Loaded quantity 3000 PCS per reel

Note: The tolerances unless mentioned is ±0.1mm,Unit = mm

Moisture Resistant Packaging

Label Desiccant Label

Aluminum moisture-proof bag

EVERLIGHT ELECTRONICS CO.,LTD.

Everlight Electronics Co., Ltd. http://www.everlight.com Rev.1 Page: 9 of 11

Device No. : SZDSE-125-T03 Prepared date: 06-Mar-2006 Prepared by: xunzhi hu

12-215/T1D-ANPHY/3C

Reliability Test Items And Conditions

The reliability of products shall be satisfied with items listed below.

Confidence level：90%

LTPD：10%

No. Items Test Condition

Test

Hours/Cycles Sample

Size Ac/Re

1 Reflow Soldering

Temp. : 260℃±5℃

Min. 5sec. 6 Min. 22 PCS. 0/1

2 Temperature Cycle

H : +100℃ 15min

∫ 5 min

L : -40℃ 15min

300 Cycles 22 PCS. 0/1

3 Thermal Shock

H : +100℃ 5min

∫ 10 sec

L : -10℃ 5min

300 Cycles 22 PCS. 0/1

4 High Temperature

Storage Temp. : 100℃ 1000 Hrs. 22 PCS. 0/1

5 Low Temperature

Storage Temp. : -40℃ 1000 Hrs. 22 PCS. 0/1

6 DC Operating Life IF = 520 mA 1000 Hrs. 22 PCS. 0/1

7 High Temperature /

High Humidity 85℃/ 85%RH 1000 Hrs. 22 PCS. 0/1

EVERLIGHT ELECTRONICS CO.,LTD.

Everlight Electronics Co., Ltd. http://www.everlight.com Rev.1 Page: 10 of 11

Device No. : SZDSE-125-T03 Prepared date: 06-Mar-2006 Prepared by: xunzhi hu

12-215/T1D-ANPHY/3C

Precautions For Use

1. Over-current-proof

Customer must apply resistors for protection, otherwise slight voltage shift will cause big

current change ( Burn out will happen ).

2. Storage

2.1 Do not open moisture proof bag before the products are ready to use.

2.2 Before opening the package: The LEDs should be kept at 30℃ or less and 90%RH or less.

2.3 After opening the package: The LED's floor life is 1 year under 30 deg C or less and 60% RH or less.

If unused LEDs remain, it should be stored in moisture proof packages.

2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the

storage time, baking treatment should be performed using the following conditions.

Baking treatment : 60±5℃ for 24 hours.

3. Soldering Condition

3.1 Pb-free solder temperature profile

3.2 Reflow soldering should not be done more than two times.

3.3 When soldering, do not put stress on the LEDs during heating.

3.4 After soldering, do not warp the circuit board.

EVERLIGHT ELECTRONICS CO.,LTD.

Everlight Electronics Co., Ltd. http://www.everlight.com Rev.1 Page: 11 of 11

Device No. : SZDSE-125-T03 Prepared date: 06-Mar-2006 Prepared by: xunzhi hu

12-215/T1D-ANPHY/3C

4.Soldering Iron

Each terminal is to go to the tip of soldering iron temperature less than 350℃ for 3 seconds

within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do

soldering of each terminal. Be careful because the damage of the product is often started at the time of

the hand solder.

5.Repairing

Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a

double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether

the characteristics of the LEDs will or will not be damaged by repairing.

EVERLIGHT ELECTRONICS CO., LTD. Tel: 886-2-2267-2000, 2267-9936

Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Fax: 886-2267-6244, 2267-6189, 2267-6306

Tucheng, Taipei 236, Taiwan, R.O.C http://www.everlight.com