ZPY 1...ZPY 200 (1.3 W) Silicon-Power-Z-Diodes (non-planar technology) Silizium-Leistungs-Z-Dioden (flachendiffundierte Dioden) Maximum power dissipation Maximale Verlustleistung 1.3 W Nominal Z-voltage - Nominale Z-Spannung Plastic case Kunststoffgehause 1...200 V DO-41 DO-204AL Weight approx. - Gewicht ca. 0.4 g Plastic material has UL classification 94V-0 Gehausematerial UL94V-0 klassifiziert Dimensions / Mae in mm Standard packaging taped in ammo pack Standard Lieferform gegurtet in Ammo-Pack see page 17 siehe Seite 17 Standard Zener voltage tolerance is graded to the international E 24 (~5%) standard. Other voltage tolerances and higher Zener voltages on request. Die Toleranz der Zener-Spannung ist in der Standard-Ausfuhrung gestuft nach der internationa-len Reihe E 24 (~5%). Andere Toleranzen oder hohere Arbeitsspannungen auf Anfrage. Maximum ratings and Characteristics Grenz- und Kennwerte Power dissipation - Verlustleistung TA = 50/C Ptot Non repetitive peak power dissipation, t < 10 ms Einmalige Impuls-Verlustleistung, t < 10 ms TA = 25/C PZSM 1.3 W 1) 40 W - 50...+150/C - 50...+175/C Operating junction temperature - Sperrschichttemperatur Storage temperature - Lagerungstemperatur Tj TS Thermal resistance junction to ambient air Warmewiderstand Sperrschicht - umgebende Luft RthA < 45 K/W 1) Thermal resistance junction to lead Warmewiderstand Sperrschicht - Anschludraht RthL < 15 K/W Zener voltages see table on next page - Zener-Spannungen siehe Tabelle auf der nachsten Seite 1 ) Valid, if leads are kept at ambient temperature at a distance of 10 mm from case Gultig, wenn die Anschludrahte in 10 mm Abstand vom Gehause auf Umgebungstemperatur gehalten werden 2 ) Tested with pulses - Gemessen mit Impulsen 3 ) The ZPY 1 is a diode, operated in forward. The cathode, indicated by a ring, is to be connected to the negative pole. Die ZPY 1 ist eine in Durchla betriebene Einzelchip-Diode. Die durch den Ring gekennzeichnete Kathode ist mit dem Minuspol zu verbinden. (c) by SEMIKRON 020404 1 ZPY 1 ... ZPY 200 (1.3 W) Maximum ratings Type Typ Grenzwerte 2 Zener voltage ) Zener-Spanng.2) IZ = IZtest VZmin [V] VZmax Test current Mestrom IZtest [mA] Dyn. resistance Diff. Widerst. Iztest / 1 kHz rzj [S] Temp. Coeffiz. of Z-voltage ...der Z-spanng. "VZ [10-4//C] Reverse volt. Sperrspanng. IR = 1 :A VR [V] Z-current 1) Z-Strom 1) TA = 50/C IZmax [mA] ZPY 1 3) 0.71 0.82 100 0.5 (<1) -26...-16 - 1000 ZPY 10 9.4 10.6 50 2 (<4) +5...+9 >5 123 ZPY 11 10.4 11.6 50 4 (<7) +5...+10 >5 112 ZPY 12 11.4 12.7 50 4 (<7) +5...+10 >7 102 ZPY 13 12.4 14.1 50 5 (<10) +5...+10 >7 92 ZPY 15 13.8 15.6 50 5 (<10) +5...+10 > 10 83 ZPY 16 15.3 17.1 25 6 (<15) +6...+11 > 10 76 ZPY 18 16.8 19.1 25 6 (<15) +6...+11 > 10 68 ZPY 20 18.8 21.2 25 6 (<15) +6...+11 > 10 61 ZPY 22 20.8 23.3 25 6 (<15) +6...+11 > 12 56 ZPY 24 22.8 25.6 25 7 (<15) +6...+11 > 12 51 ZPY 27 25.1 28.9 25 7 (<15) +6...+11 > 14 45 ZPY 30 28 32 25 8 (<15) +6...+11 > 14 41 ZPY 33 31 35 25 8 (<15) +6...+11 > 17 37 ZPY 36 34 38 10 16 (<40) +6...+11 > 17 34 ZPY 39 37 41 10 20 (<40) +6...+11 > 20 32 ZPY 43 40 46 10 24 (<45) +7...+12 > 20 28 ZPY 47 44 50 10 24 (<45) +7...+12 > 24 26 ZPY 51 48 54 10 25 (<60) +7...+12 > 24 24 ZPY 56 52 60 10 25 (<60) +7...+12 > 28 22 ZPY 62 58 66 10 25 (<80) +8...+13 > 28 20 ZPY 68 64 72 10 25 (<80) +8...+13 > 34 18 ZPY 75 70 79 10 30 (<100) +8...+13 > 34 16 ZPY 82 77 88 10 30 (<100) +8...+13 > 41 15 ZPY 91 85 96 5 40 (<200) +9...+13 > 41 14 ZPY 100 94 106 5 60 (<200) +9...+13 > 50 12 ZPY 110 104 116 5 80 (<250) +9...+13 > 50 11 ZPY 120 114 127 5 80 (<250) +9...+13 > 60 10 ZPY 130 124 141 5 90 (<300) +9...+13 > 60 9 ZPY 150 138 156 5 100 (<300) +9...+13 > 75 8 ZPY 160 153 171 5 110 (<350) +9...+13 > 75 8 ZPY 180 168 191 5 120 (<350) +9...+13 > 90 7 ZPY 200 188 212 5 150 (<350) +9...+13 > 90 6 2 020404 (c) by SEMIKRON