FLS CONNECTOR 0.5mm Emboss Tape Connectors for FPC (.020") pitch Features------------------------ * Easy location of FPC The shrouded FPC entry point allows the FPC to be positioned and hold in place before the connector is locked. * Heat resistant design suitable for surface mounting The housing is made of heat resistant plastic to allow reflow soldering. * In-line surface mounting Has an in-line surface mount tails for easy inspection. * Two types of connections The connector is available in either the normal or reverse configurations.The FPC is positioned with its mating surfaces facing upward for the normal configured connector,while the reverse configuration requires that the FPC be positioned with its mating surfaces facing down.The engineer has greater Compact connector with just 2.0mm (.079 ") high after mounting on the PC board. freedom in designing his circuitry. * Embossed tape for automatic mounting The FLS connector can be packaged in embossed tape for automatic mounting. Specifications ------------------- * Current rating: 0.5A AC, DC * Voltage rating: 50V AC, DC * Temperature range: -25C to +85C (including temperature rise in applying electrical current) * Contact resistance: Initial value/40m max. After environmental testing/60m max. * Insulation resistance: 800M min. * Withstanding voltage: 200V AC/minute * Applicable FPC: Lead pitch/0.5mm(.020") Lead width/0.35mm(.014") Mating part thickness/ 0.30.03mm (.012".001") <Note>FPC to be actually used should be checked for applicability. FJ ST * Contact JST if Lead-Free product is required. * Refer to "General Instruction and Notice when using Terminals and Connectors" at the end of this catalog. * Contact JST for details. Standards ---------------------- 0 Recognized E60389 1 Certified LR20812 497 FLS CONNECTOR Connector --------------------------------------------------------------- Normal type Reverse type 2.4 (.094) 0.2 (.008) 2.4 (.094) 1.9 (.075) 1.9 (.075) 3.0 (.118) 3.0 (.118) C [0.7(.028)] 0.5(.020) A B Circuits 0.5(.020) A B Dimensions mm(in.) Model No. Normal type [0.7(.028)] 2.0 (.079) 2.0 (.079) 5.5(.217) FJST FJST 1.9 (.075) 5.5(.217) C 1.9 (.075) 0.2 (.008) Reverse type A B C Q'ty / reel 6 06FLS-SM1-TB 06FLS-RSM1-TB 2.5(.098) 3.55(.140) 8.5(.335) 2,000 7 07FLS-SM1-TB 07FLS-RSM1-TB 3.0(.118) 4.05(.159) 9.0(.354) 2,000 9 09FLS-SM1-TB 09FLS-RSM1-TB 4.0(.157) 5.05(.199) 10.0(.394) 2,000 10 10FLS-SM1-TB 10FLS-RSM1-TB 4.5(.177) 5.55(.219) 10.5(.413) 2,000 12 12FLS-SM1-TB 12FLS-RSM1-TB 5.5(.217) 6.55(.258) 11.5(.453) 2,000 13 13FLS-SM1-TB - 6.0(.236) 7.05(.278) 12.0(.472) 2,000 15 15FLS-SM1-TB 15FLS-RSM1-TB 7.0(.276) 8.05(.317) 13.0(.512) 2,000 16 16FLS-SM1-TB 16FLS-RSM1-TB 7.5(.295) 8.55(.337) 13.5(.531) 2,000 17 17FLS-SM1-TB 17FLS-RSM1-TB 8.0(.315) 9.05(.356) 14.0(.551) 2,000 18 18FLS-SM1-TB 18FLS-RSM1-TB 8.5(.335) 9.55(.376) 14.5(.571) 2,000 19 19FLS-SM1-TB 19FLS-RSM1-TB 9.0(.354) 10.05(.396) 15.0(.591) 2,000 20 20FLS-SM1-TB 20FLS-RSM1-TB 9.5(.374) 10.55(.415) 15.5(.610) 2,000 22 22FLS-SM1-TB 22FLS-RSM1-TB 10.5(.413) 11.55(.455) 16.5(.650) 2,000 24 24FLS-SM1-TB 24FLS-RSM1-TB 11.5(.453) 12.55(.494) 17.5(.689) 2,000 26 26FLS-SM1-TB 26FLS-RSM1-TB 12.5(.492) 13.55(.533) 18.5(.728) 2,000 28 28FLS-SM1-TB 28FLS-RSM1-TB 13.5(.531) 14.55(.573) 19.5(.768) 2,000 30 30FLS-SM1-TB 30FLS-RSM1-TB 14.5(.571) 15.55(.612) 20.5(.807) 2,000 Material and Finish Contact: Phosphor bronze, copper-undercoated, tin/lead-plated Slider housing: Nylon 46,UL94V-0 Receptacle housing: Nylon 46,UL94V-0 ( )FLS-SM1-TB ...natural ( )FLS-SM1-TB ...gray ( )FLS-RSM1-TB ...black ( )FLS-RSM1-TB ...natural Solder tab: Phosphor bronze, copper-undercoated, tin/lead-plated Note: The products listed above are supplied on embossed-tape. 498 FLS CONNECTOR Taping specifications ------------------------------------------------------ Feeding direction 3302.0(12.992.079)dia. Feeding direction 1.750.1 (.069.004) 4.00.1 (.157.004) Cover tape Cover tape Carrier tape S0.1(.004) W0.3(.012) Carrier tape 12.00.1 (.472.004) 12.00.1 (.472.004) Taping dimensions mm(in.) Circuits 2.00.1 (.079.004) F0.1(.004) 2.00.1 (.079.004) F0.1(.004) 4.00.1 (.157.004) 1.550.05 (.061.002)dia. W0.3(.012) Feeding direction Feeding direction 1.750.1 (.069.004) (24 to 30 circuits) (6 to 22 circuits) 1.550.05 (.061.002)dia. Cover tape leader Leader part 100(3.937)min. The end part Connector 160(6.299)min. mounting part 400(15.748)min. 2.00.5 (.079.020) W1 13(.512)dia. Carrier tape W W1 Q'ty / reel F S 6 to 7 7.5(.295) - 16.0( .630) 17.5( .689) 2,000 9 to 22 11.5(.453) - 24.0( .945) 25.5(1.004) 2,000 24 to 30 14.2(.559) 28.4(1.118) 32.0(1.260) 33.5(1.319) 2,000 PC board layout (viewed from component side) ----- 1.60.1 (.063.004) 0.150.1 (.006.004) Lead section dimensions of FPC ------------ Note: 1. Specifications conform to JIS C 0806. The tape width, connector loading recess square hole dimensions, etc. are determined by the number of circuits and external shape of the connector to be loaded. 2. Specifications are subject to change without prior notice. [0.5(.020)x(Number of circuits +1)]0.05(.002) 0.50.1(.020.004) [0.5(.020)x(Number of circuits -1)]0.03(.001) 0.50.03(.020.001) 0.30.03 (.012.001) 0.350.04 (.014.002) 1.20.1(.047.004) 3.30.1 (.130.004) Note: 1. Tolerances are non-cumulative: 0.03mm(.001" ) for all centers. 2. The dimensions above should serve as a guideline. Contact JST for details. Assembly layout--------------------- Contact point Normal type 5.5(.217) 2.0(.079) 5.5(.217) Reinforcing layer 3.0(.118)min. 0.50.03(.020.001) 0.350.05(.014.002) Reverse type Contact point 499