SPEC NO: DSAF7181 REV NO: V.1 DATE: AUG/30/2005 PAGE: 1 OF 5
APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Y.W.WANG ERP: 1102000502
Package Dimensions
3.4mm RIGHT ANGLE LED INDICATOR
Features
PRE-TRIMMED LEADS FOR PC MOUNTING.
CAN BE ASSEMBLED WITH EACH OTHER.
I.C.COMPATIBLE.
BLACK CASE ENHANCES CONTRAST RATIO.
WIDE VIEWING ANGLE.
HIGH RELIABILITY LIFE MEASURED IN YEARS.
HOUSING MATERIAL:PPA.
PACKAGE:1000PCS / REEL.
HIGH TEMPERATURE RESISTANT HOUSING.
HIGH GLASS TRANSITION TEMPERATURE EPOXY.
RoHS COMPLIANT.
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.25(0.01") unless otherwise noted.
3. Specifications are subject to change without notice.
WP138A8QMP/SRD/TG SUPER BRIGHT RED
Description
The Super Bright Red source color devices are made with
Gallium Aluminum Arsenide Red Light Emitting Diode.
SPEC NO: DSAF7181 REV NO: V.1 DATE: AUG/30/2005 PAGE: 2 OF 5
APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Y.W.WANG ERP: 1102000502
Selection Guide
Note:
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value.
Electrical / Optical Characteristics at TA=25°C
Absolute Maximum Ratings at TA=25°C
Note:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
Part No. Dice Lens Type Iv (mcd)
@ 20 mA
Viewing
Angle
Min. Typ. 2θ
θθθ1/2
WP138A8QMP/SRD/TG SUPER BRIGHT RED (GaAlAs) RED DIFFUSED 110 250 60°
Symbol Parameter Device Typ. Max. Test ConditionsUnits
λpeak Peak Wavelength Super Bright Red 660 nm IF=20mA
λDDominant Wavelength Super Bright Red 640 nm IF=20mA
∆λ1/2 Spectral Line Half-width Super Bright Red 20 nm IF=20mA
C Capacitance Super Bright Red 45 pF VF=0V;f=1MHz
VFForward Voltage Super Bright Red 1.85 2.5 V IF=20mA
IRReverse Current Super Bright Red 10 uA VR = 5V
Parameter Super Bright Red Units
Power dissipation 100 mW
DC Forward Current 30 mA
Peak Forward Current [1] 155 mA
Reverse Voltage 5 V
Operating/Storage Temperature -40°C To +85°C
SPEC NO: DSAF7181 REV NO: V.1 DATE: AUG/30/2005 PAGE: 3 OF 5
APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Y.W.WANG ERP: 1102000502
Super Bright Red WP138A8QMP/SRD/TG
SPEC NO: DSAF7181 REV NO: V.1 DATE: AUG/30/2005 PAGE: 4 OF 5
APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Y.W.WANG ERP: 1102000502
Tape Specifications
(Units : mm)
WP138A8QMP/SRD/TG
Recommended Soldering Pattern
(Units : mm)
SPEC NO: DSAF7181 REV NO: V.1 DATE: AUG/30/2005 PAGE: 5 OF 5
APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Y.W.WANG ERP: 1102000502
PACKING & LABEL SPECIFICATIONS WP138A8QMP/SRD/TG
Remarks:
If special sorting is required (e.g. binning based on forward voltage, Luminous intensity/ luminous flux, or wavelength),
the typical accuracy of the sorting process is as follows:
1. Wavelength: +/-1nm
2. Luminous intensity/ luminous flux: +/-15%
3. Forward Voltage: +/-0.1V
Note: Accuracy may depend on the sorting parameters.
WP138A8QMP/xxx