DATA SHEET PHOTOCOUPLER PS2801-1,PS2801-4 HIGH ISOLATION VOLTAGE SOP PHOTOCOUPLER -NEPOC TM Series- DESCRIPTION The PS2801-1 and PS2801-4 are optically coupled isolators containing a GaAs light emitting diode and an NPN silicon phototransistor in a plastic SOP for high density applications. This package has shield effect to cut off ambient light. FEATURES * High isolation voltage (BV = 2 500 Vr.m.s.) * Small and thin package (4,16-pin SOP, Pin pitch 1.27 mm) * High collector to emitter voltage (VCEO = 80 V) * High-speed switching (tr = 3 s TYP., tf = 5 s TYP.) * Ordering number of tape product: PS2801-1-F3, F4, PS2801-4-F3, F4 * Safety standards: PS2801-1, -4 * UL approved: File No. E72422 (S) * BSI approved: No. 8188, 8189 * VDE0884 approved (Option): PS2801-4 only APPLICATIONS * Programmable logic controllers * Measuring instruments * Power supply * Hybrid IC The information in this document is subject to change without notice. Before using this document, please confirm that this is the latest version. Not all devices/types available in every country. Please check with local NEC representative for availability and additional information. Document No. P12277EJ7V0DS00 (7th edition) Date Published February 2001 NS CP(K) Printed in Japan The mark * shows major revised points. (c) 1991, 2001 PS2801-1,PS2801-4 PACKAGE DIMENSIONS (UNIT: mm) PS2801-1 PS2801-4 TOP VIEW 2.70.3 16 15 14 13 12 11 10 9 10.30.3 TOP VIEW 4 3 1. Anode 2. Cathode 3. Emitter 4. Collector 1 2 3 4 5 6 7 8 1. 3. 5. 7. 2. 4. 6. 8. 9. 11. 13. 15. 10. 12. 14. 16. 1 2 7.00.3 0.50.3 1.27 0.40.1 0.12 M 0.15+0.10 -0.05 7.00.3 1.3 2.3 MAX. 0.10.1 2.0 0.15+0.10 -0.05 0.10.1 2.3 MAX. 2.0 4.4 Anode Cathode Emitter Collector 0.40+0.10 -0.05 0.12 M 1.27 4.4 1.3 0.50.3 MARKING PS2801-4 PS2801-1 1 003 PS2801-4 N 003 Assembly Lot Last number of type No. : 1 No. 1 pin Mark N 0 03 0 03 Week Assembled Year Assembled (Last 1 Digit) CTR Rank Code Week Assembled Year Assembled (Last 1 Digit) 2 Country Assembled Type Number Assembly Lot Data Sheet P12277EJ7V0DS PS2801-1,PS2801-4 ORDERING INFORMATION Part Number Package PS2801-1 Application Part *1 Number Packing Style 4-pin SOP 50 pcs (Tape 50 pcs cut) PS2801-1-F3 PS2801-1 Embossed Tape 3 500 pcs/reel PS2801-1-F4 PS2801-4 16-pin SOP PS2801-4-F3 Magazine Case 45 pcs PS2801-4 Embossed Tape 2 500 pcs/reel PS2801-4-F4 *1 For the application of the Safety Standard, following part number should be used. ABSOLUTE MAXIMUM RATINGS (TA = 25 C, unless otherwise specified) Parameter Symbol Ratings PS2801-1 Diode Unit PS2801-4 Forward Current (DC) IF 50 mA Reverse Voltage VR 6 V Power Dissipation Derating Power Dissipation Peak Forward Current *1 PD/C 0.6 0.8 mW/C PD 60 80 mW/ch IFP 1 A Collector to Emitter Voltage VCEO 80 V Emitter to Collector Voltage VECO 6 V IC 50 mA/ch PC/C 1.2 mW/C PC 120 mW/ch BV 2 500 Vr.m.s. Operating Ambient Temperature TA -55 to +100 C Storage Temperature Tstg -55 to +150 C Transistor Collector Current Power Dissipation Derating Power Dissipation Isolation Voltage *2 *1 PW = 100 s, Duty Cycle = 1 % *2 AC voltage for 1 minute at TA = 25 C, RH = 60 % between input and output Data Sheet P12277EJ7V0DS 3 PS2801-1,PS2801-4 ELECTRICAL CHARACTERISTICS (TA = 25 C) Parameter Diode Symbol Conditions Forward Voltage VF IF = 5 mA Reverse Current IR VR = 5 V Terminal Capacitance Ct V = 0 V, f = 1.0 MHz Transistor Collector to Emitter Dark Current ICEO VCE = 80 V, IF = 0 mA Coupled Current Transfer Ratio *1 (IC/IF) CTR IF = 5 mA, VCE = 5 V Collector Saturation Voltage VCE(sat) IF = 10 mA, IC = 2 mA Isolation Resistance RI-O VI-O = 1.0 kVDC Isolation Capacitance CI-O V = 0 V, f = 1.0 MHz *2 tr Rise Time Fall Time *2 VCC = 5 V, IC = 2 mA, RL = 100 tf K : 300 to 600 (%) P : 150 to 300 (%) L : 100 to 300 (%) N : 80 to 600 (%) *2 Test circuit for switching time VCC Pulse Input PW = 100 s Duty Cycle = 1/10 IF VOUT 4 TYP. MAX. Unit 1.1 1.4 V 5 A 15 80 RL = 100 Data Sheet P12277EJ7V0DS pF 100 nA 600 % 0.3 V 11 10 0.4 pF 3 s 5 *1 CTR rank (PS2801-1 only) 50 MIN. PS2801-1,PS2801-4 TYPICAL CHARACTERISTICS (TA = 25 C, unless otherwise specified) DIODE POWER DISSIPATION vs. AMBIENT TEMPERATURE TRANSISTOR POWER DISSIPATION vs. AMBIENT TEMPERATURE PS2801-4 75 50 Transistor Power Dissipation PC (mW) Diode Power Dissipation PD (mW) 100 0.8 mW/C PS2801-1 0.6 mW/C 25 0 25 50 75 1.2 mW/C 50 25 75 50 100 Ambient Temperature TA ( C) FORWARD CURRENT vs. FORWARD VOLTAGE COLLECTOR CURRENT vs. COLLECTOR TO EMITTER VOLTAGE 70 TA = +100 C +60 C +25 C 60 Collector Current IC (mA) Forward Current IF (mA) PS2801-1 PS2801-4 0 5 0 C -25 C -55 C 1 0.5 50 40 50 30 20 mA mA 20 mA 10 IF = 5 mA 10 0.1 0.8 0.9 1.0 1.1 1.2 1.3 1.4 1.5 0 2 4 6 8 10 Forward Voltage VF (V) Collector to Emitter Voltage VCE (V) COLLECTOR TO EMITTER DARK CURRENT vs. AMBIENT TEMPERATURE COLLECTOR CURRENT vs. COLLECTOR SATURATION VOLTAGE 40 10 000 VCE = 80 V 40 V 24 V 10 V 5V 1 000 Collector Current IC (mA) Collector to Emitter Dark Current ICEO (nA) 100 Ambient Temperature TA (C) 10 0.7 150 100 100 50 200 100 10 50 mA 20 mA 10 10 mA 5 mA 5 2 mA IF = 1 mA 1 0.5 1 0.1 -50 -25 0 25 50 75 100 Ambient Temperature TA (C) 0 0.2 0.4 0.6 0.8 1.0 Collector Saturation Voltage VCE(sat) (V) Data Sheet P12277EJ7V0DS 5 PS2801-1,PS2801-4 CURRENT TRANSFER RATIO vs. FORWARD CURRENT 1.2 Current Transfer Ratio CTR (%) Normalized Current Transfer Ratio CTR NORMALIZED CURRENT TRANSFER RATIO vs. AMBIENT TEMPERATURE 1.0 0.8 0.6 0.4 Normalized to 1.0 at TA = 25 C, IF = 5 mA, VCE = 5 V 0.2 Sample A B C 200 150 100 50 0.0 -50 0 -25 25 50 100 75 100 1 000 VCC = 5 V, IF = 5 mA, CTR = 236 % Switching Time t (s) tf tr 5 td ts 1 0.5 0.05 0.1 0.5 1 5 ts 10 tr td 1 0.1 0.1 10 1 10 100 Load Resistance RL (k) LONG TERM CTR DEGRADATION 1.2 IF = 5 mA, VCE = 5 V 0 tf 100 FREQUENCY RESPONSE TYP. 1.0 -5 -10 RL = 1 k -15 100 -20 CTR (Relative Value) Normalized Gain Gv 10 SWITCHING TIME vs. LOAD RESISTANCE Load Resistance RL (k) IF = 5 mA TA = 25 C IF = 20 mA TA = 25 C IF = 5 mA TA = 60 C 0.8 0.6 0.4 0.2 1 2 5 10 20 300 50 100 200 500 0.0 10 102 103 Time (Hr) Frequency f (kHz) Remark The graphs indicate nominal characteristics. 6 1.0 SWITCHING TIME vs. LOAD RESISTANCE 10 0.5 0.1 Forward Current IF (mA) VCC = 5 V, 50 IC = 2 mA, CTR = 236 % 0.1 0.01 0.02 Ambient Temperature TA (C) 100 Switching Time t ( s) 300 VCE = 5 V, n=3 250 Data Sheet P12277EJ7V0DS 104 105 PS2801-1,PS2801-4 TAPING SPECIFICATIONS (UNIT: mm) 1.5+0.1 -0 7.50.1 4.00.1 7.550.1 2.00.1 16.00.3 1.750.1 Outline and Dimensions (Tape) 2.8 MAX. 0.3 1.550.1 2.30.1 2.850.1 4.00.1 Tape Direction 1003 1003 1003 1003 1003 1003 1003 1003 1003 PS2801-1-F4 1003 PS2801-1-F3 Outline and Dimensions (Reel) 2.5 R 1.0 21.00.8 1005.0 330 2.00.5 13.00.5 16.4 +2.0 -0.0 Packing: 3 500 pcs/reel Data Sheet P12277EJ7V0DS 7 PS2801-1,PS2801-4 10.70.1 2.8 MAX. 16.00.3 1.5+0.1 -0 7.50.1 2.00.1 4.00.1 1.750.1 Outline and Dimensions (Tape) 0.3 2.30.1 8.30.1 1.550.1 12.00.1 Tape Direction PS2801-4-F3 PS2801-4-F4 Outline and Dimensions (Reel) 2.5 R 1.0 21.00.8 1005.0 330 2.00.5 13.00.5 16.4 +2.0 -0.0 Packing: 2 500 pcs/reel 8 Data Sheet P12277EJ7V0DS PS2801-1,PS2801-4 NOTES ON HANDLING 1. Recommended soldering conditions (1) Infrared reflow soldering * Peak reflow temperature 235 C or below (package surface temperature) * Time of temperature higher than 210 C 30 seconds or less * Number of reflows Three * Flux Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt % is recommended.) Package Surface Temperature T (C) Recommended Temperature Profile of Infrared Reflow (heating) to 10 s 235 C (peak temperature) 210 C to 30 s 100 to 160 C 60 to 120 s (preheating) Time (s) (2) Dip soldering * Temperature 260 C or below (molten solder temperature) * Time 10 seconds or less * Number of times One (Allowed to be dipped in solder including plastic mold portion.) * Flux Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt % is recommended.) (3) Cautions * Fluxes Avoid removing the residual flux with freon-based and chlorine-based cleaning solvent. 2. Cautions regarding noise Be aware that when voltage is applied suddenly between the photocoupler's input and output or between corrector-emitters at startup, the output side may enter the on state, even if the voltage is within the absolute maximum ratings. Data Sheet P12277EJ7V0DS 9 PS2801-1,PS2801-4 PROGRAMMABLE LOGIC CONTROLLERS EXAMPLE Purpose: In-out interface Ya Xaxis xis Servo Motor Servo Motor Sensor Controller Amplifier Motor Controller Heater Controller Pulse Generator COM PS2801-1 PS2801-4 PD4050 AC.DC Servo Motor Driver Unit M TG PG Pulse Motor Driver Unit CRT Computer Terminal Terminal Printer Printer Power Supply PC Programmable Logic Controller FDD Controller Memory Cassette 10 M Data Sheet P12277EJ7V0DS PS2801-1,PS2801-4 [MEMO] Data Sheet P12277EJ7V0DS 11 PS2801-1,PS2801-4 CAUTION Within this device there exists GaAs (Gallium Arsenide) material which is a harmful substance if ingested. Please do not under any circumstances break the hermetic seal. NEPOC is a trademark of NEC Corporation. * The information in this document is current as of February, 2001. The information is subject to change without notice. For actual design-in, refer to the latest publications of NEC's data sheets or data books, etc., for the most up-to-date specifications of NEC semiconductor products. Not all products and/or types are available in every country. Please check with an NEC sales representative for availability and additional information. * No part of this document may be copied or reproduced in any form or by any means without prior written consent of NEC. NEC assumes no responsibility for any errors that may appear in this document. * NEC does not assume any liability for infringement of patents, copyrights or other intellectual property rights of third parties by or arising from the use of NEC semiconductor products listed in this document or any other liability arising from the use of such products. No license, express, implied or otherwise, is granted under any patents, copyrights or other intellectual property rights of NEC or others. * Descriptions of circuits, software and other related information in this document are provided for illustrative purposes in semiconductor product operation and application examples. The incorporation of these circuits, software and information in the design of customer's equipment shall be done under the full responsibility of customer. NEC assumes no responsibility for any losses incurred by customers or third parties arising from the use of these circuits, software and information. * While NEC endeavours to enhance the quality, reliability and safety of NEC semiconductor products, customers agree and acknowledge that the possibility of defects thereof cannot be eliminated entirely. To minimize risks of damage to property or injury (including death) to persons arising from defects in NEC semiconductor products, customers must incorporate sufficient safety measures in their design, such as redundancy, fire-containment, and anti-failure features. * NEC semiconductor products are classified into the following three quality grades: "Standard", "Special" and "Specific". The "Specific" quality grade applies only to semiconductor products developed based on a customer-designated "quality assurance program" for a specific application. The recommended applications of a semiconductor product depend on its quality grade, as indicated below. Customers must check the quality grade of each semiconductor product before using it in a particular application. "Standard": Computers, office equipment, communications equipment, test and measurement equipment, audio and visual equipment, home electronic appliances, machine tools, personal electronic equipment and industrial robots "Special": Transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster systems, anti-crime systems, safety equipment and medical equipment (not specifically designed for life support) "Specific": Aircraft, aerospace equipment, submersible repeaters, nuclear reactor control systems, life support systems and medical equipment for life support, etc. The quality grade of NEC semiconductor products is "Standard" unless otherwise expressly specified in NEC's data sheets or data books, etc. If customers wish to use NEC semiconductor products in applications not intended by NEC, they must contact an NEC sales representative in advance to determine NEC's willingness to support a given application. (Note) (1) "NEC" as used in this statement means NEC Corporation and also includes its majority-owned subsidiaries. (2) "NEC semiconductor products" means any semiconductor product developed or manufactured by or for NEC (as defined above). M8E 00. 4