SPECIFICATION
PS-15-5 PS-15-12 PS-15-15 PS-15-24 PS-15-48
MODEL
DC VOLTAGE
RATED CURRENT
CURRENT RANGE
RATED POWER
OUTPUT
LINE REGULATION
LOAD REGULATION
HOLD UP TIME(Typ.)
VOLTAGE RANGE
FREQUENCY RANGE
EFFICIENCY(Typ.)
INPUT
INRUSH CURRENT (Typ.)
LEAKAGE CURRENT
SAFETY STANDARDS
WORKING HUMIDITY
WORKING TEMP.
STORAGE TEMP., HUMIDITY
TEMP. COEFFICIENT
VIBRATION
DIMENSIONOTHERS
NOTE
PACKING
OVERLOAD
OVER VOLTAGE
AC CURRENT (Typ.)
5V 12V 15V 24V 48V
2.8A 1.25A 1A 0.625A 0.313A
0 ~ 2.8A 0 ~ 1.25A 0 ~ 1A 0 ~ 0.625A 0 ~ 0.313A
14W 15W 15W 15W 15W
100mVp-p 120mVp-p 120mVp-p 150mVp-p 200mVp-p
±2.0% ±2.0% ±2.0% ±2.0% ±2.0%
±1.0%
±1.0%
±1.0%
±1.0%
±1.0%
±1.0%
±0.5%
±0.5%
±0.5%
±0.5%
100ms at full load
85 ~ 264VAC 120 ~ 370VDC
47 ~ 63Hz
74% 77%
13.8 ~ 16.2V 17.25 ~ 20.25V 27.6 ~ 32.4V 55.2 ~ 64.8V
78% 79% 77%
0.4A/115VAC 0.2A/230VAC
COLD START 40A/230VAC
<0.5mA / 240VAC
Above 105% rated output power
5.75 ~ 6.75V
Protection type : Hiccup mode, recovers automatically after fault condition is removed
Protection type : Hiccup mode, recovers automatically after fault condition is removed
-10 ~ +60 (Refer to output load derating curve)℃
20 ~ 90% RH non-condensing
-20 ~ +85 , 10 ~ 95% RH℃
±℃ ℃)0.03%/ (0 ~ 50
10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes
94*49*25mm (L*W*H)
0.083Kg; 120pcs/10.96Kg
File Name:PS-15-SPEC 2017-07-07
OVER TEMPERATURE
HARMONIC CURRENT
EMS IMMUNITY
IEC60950-1 CB approved by TUV
Compliance to EN55032 (CISPR32) Class B
Compliance to EN61000-3-2,-3
Compliance to EN61000-4-2,3,4,5,6,8,11, light industry level, criteria A
15W Single Output Switching Power Supply PS-15 series
■ Features :
WITHSTAND VOLTAGE
ISOLATION RESISTANCE
I/P-O/P:3KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC
I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25 / 70% RH℃
EMI CONDUCTION & RADIATION
ENVIRONMENT
SAFETY &
EMC
(Note 4)
PROTECTION
1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature.℃
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3. Tolerance : includes set up tolerance, line regulation and load regulation.
4. The power supply is considered a component which will be installed into a final equipment. All the EMC tests are been executed by mounting the unit on
a mm* mm metal plate with 1mm of thickness. The final equipment must be re-confirmed that it still meets EMC directives.360 360 For guidance on how to
perform these EMC tests, please refer to EMI testing of component power supplies. (as available on http://www.meanwell.com)
RIPPLE & NOISE (max.) Note.2
VOLTAGE TOLERANCE Note.3
Tj 140 typically (U1) detect on main control IC℃
•Universal AC input / Full range
•Low leakage current <0.5mA
•Protections: Short circuit / Overload / Over voltage / Over temperature
•Cooling by free air convection
•100% full load burn-in test
•Fix switching frequency at 67KHz
•Low cost
•High reliability
•2 years warranty
SETUP, RISE TIME 5 ~ 24V:1200ms, 30ms 48V:1200ms, 75ms at full load
Protection type : Shut off o/p voltage, clamping by zener diode
MTBF 681.7K hrs min. MIL-HDBK-217F (25 )℃
NRND
Unit:mm
AMBIENT TEMPERATURE ( )℃INPUT VOLTAGE (V) 60Hz
LOAD (%)
Mechanical Specification
Static Characteristics
-10
-10
0102030405060
20
40
60
80
100
PWM
CIRCUIT
DETECTION
EMI
FILTER
RECTIFIERS
&
FILTER
POWER
SWITCHING
FILTER
&
RECTIFIERS +V
-V
I/P
FG
CONTROL
1
94
87
CN2
25 42
49
4- 3.5ψ
CN1
2
1
2
3
To chassis Grounding
(HORIZONTAL)
Derating Curve
DC Output Connector (CN1) : JST B2P-VH or equivalent
Pin No.
1
2
Assignment
+V
-V
Mating Housing
JST VHR
or equivalent
Terminal
JST SVH-21T-P1.1
or equivalent
AC Input Connector (CN2) : JST B3P-VH or equivalent
Pin No.
1
2
3
Assignment
No Pin
AC/N
AC/L
Mating Housing
JST VHR JST SVH-21T-P1.1
or equivalent or equivalent
Terminal
Block Diagram fosc : 67KHz
15W Single Output Switching Power Supply PS-15 series
LOAD(%)
85 90 95 100 105 264
100
90
80
70
60
50
40
File Name:PS-15-SPEC 2017-07-07
NRND
