Search Results Home > Products Overview > Search Results >
Current refinements (click to remove) Search Tips Within Results
gfedc
Text Search: 'PCSBMT2/0-10-2Y'
Your search criteria matched only one product, show n below
PCSBMT2/0-10-2Y
For Use with Aluminum or Copper Code Conductors
• Flexible design – can be used as a tap, splice, or dead end connector
• Body made from high strength, extruded aluminum alloy to provide premium electrical and
mechanical performance
• Two isolated mounting holes at either end of connector facilitate direct mounting using 1/4
inch bolts
• Insulated with clear PVC to eliminate the need for taping and allow for visual inspection of the
complete conductor insertion
• Each port pre-filled with oxide inhibiting joint compound seals out air and moisture to deter
surface oxidation
• Wide wire range-taking capability minimizes inventory requirements
• Dual-sided entry allows offset and opposite entry for primary and secondary conductors
• Plated steel or aluminum set screw provides high strength, durable electrical contact between
conductor and connector
• UL Listed and CSA Certified for use up to 600 V and temperature rated 90°C
Part Number PCSBMT2/0-10-2Y
RoHS Compliancy Status Compliant
Note PCSBMT2/0-10-2Y replaces PCSBMT2/0-10-2
Part Description Multi-Tap Connector, double-sided mounting, 10 ports.
CSA Certified Yes
UL Listed Yes
Height (In.) 1.50
Height (mm) 38.1
Length (In.) 8.24
Length (mm) 209.3
Width (In.) 1.56
Width (mm) 39.6
Stud Hole Size (In.) 1/4
Aluminum or Copper Conductor Size Range 2/0 – #14 AWG STR
Hex Key Size (In.) 3/16
No. of Ports 10
Pricing Description Multi-Tap Connector, Double-Sided, Clear Insul., w /Mount Holes, 10 Ports, 2/0 - #14 STR
Spacing (In.) .67
Tightening Torque (In-Lbs) 120
Min. Order UOM PC
Min. Order Qty. 1
BOM Qty. (# of Pkgs.) 0
0
Add to Favorite Product List gfedc
Please register to utilize the 'Bill of Materials', 'Submit Quotes' and 'Favorite Product List' features.
Home | Industries | Solutions | Products | Partners | Support | Contact Us | Site Map | Careers
Copyright © 1995-2008, PANDUIT CORP. All rights reserved. | Legal Information | Privacy Policy
Evaluate
- FAQ's
Design a Solution
- Part Draw ings
- PDF-Multi-Tap Co ..
How to Buy
- Bill of Material
- Favorite Products List
- Locate Distributor
Home Industries Solutions Products Partners Support About Us Careers -Search-
Entire Site