Teccor(R) brand Thyristors EV Series 0.8 Amp Sensitive SCRs HF SxX8xSx Series Description New device series offers high static dv/dt and lower turn off (tq) sensitive SCR with its small die planar construction design. It is specifically designed for GFCI (Ground Fault Circuit Interrupter) and Gas Ignition applications. All SCRs junctions are glass-passivated to ensure long term reliability and parametric stability. Features * RoHS compliant and Halogen-Free * High dv/dt noise immunity * Improved turn-off time (tq) < 25 sec * Thru-hole and surface mount packages * Sensitive gate for direct microprocessor interface * Surge current capability > 10Amps Main Features Symbol IT(RMS) VDRM / VRRM IGT Value Unit 0.8 A 400 to 800 V 5 to 200 A * Blocking voltage ( VDRM / VRRM ) capability - up to 800V Schematic Symbol A Applications The SxX8xSx EV series is specifically designed for GFCI (Ground Fault Circuit Interrupter) and gas ignition applications. G K Absolute Maximum Ratings Symbol IT(RMS) IT(AV) ITSM SxX8xSx Series Parameter RMS on-state current (full sine wave) Average on-state current Non repetitive surge peak on-state current (Single cycle, TJ initial = 25C) I2t I2t Value for fusing di/dt Critical rate of rise of on-state current IG = 10mA IGM Peak Gate Current PG(AV) Tstg TJ Value Unit TO-92 TC = 55C 0.8 A SOT-89 TC = 60C 0.8 A SOT-223 TL = 60C 0.8 A TO-92 TC = 55C 0.51 A SOT-89 TC = 60C 0.51 A SOT-223 TO-92 SOT-89 SOT-223 tp = 10 ms TL = 60C 0.51 A F= 50Hz 8 A F= 60Hz 10 A F = 50 Hz 0.32 A2s tp = 8.3 ms TO-92 SOT-89 SOT-223 tp = 10 s F = 60 Hz 0.41 A2s TJ = 125C 50 A/s TJ = 125C 1.0 A Average gate power dissipation -- TJ = 125C 0.1 W Storage junction temperature range -- -- -40 to 150 C Operating junction temperature range -- -- -40 to 125 C 173 Revised: June 15, 2011 01:18 PM (c)2011 Littelfuse, Inc Specifications are subject to change without notice. Please refer to http://www.littelfuse.com for current information. Teccor(R) brand Thyristors EV Series 0.8 Amp Sensitive SCRs Electrical Characteristics (TJ = 25C, unless otherwise specified) Symbol Value Description Test Conditions Limit DC Gate Trigger Current VD = 6V RL = 100 VGT DC Gate Trigger Voltage VD = 6V RL = 100 MAX. 0.8 V VGRM Peak Reverse Gate Voltage IRG = 10A MIN. 5 V Holding Current RGK = 1 K Initial Current = 20mA MAX. 5 mA Critical Rate-of-Rise of Off-State Voltage TJ = 125C VD = VDRM /VRRM Exp. Waveform RGK =1 k MIN. 75 V/s tq Turn-Off Time TJ = 25C @ 600 V RGK =1 k MAX. 30 25 25 s tgt Turn-On Time IG=10mA PW = 15sec IT = 1.6A(pk) TYP. 2.0 2.0 2.0 s IGT IH (dv/dt)s Unit SxX8yS1 SxX8yS2 SxX8yS MIN. 0.5 1 15 A MAX. 5 50 200 A Note: x = voltage, y = package Static Characteristics (TJ = 25C, unless otherwise specified) Symbol Description Test Conditions Limit Value Unit V TM Peak On-State Voltage ITM = 1.6A (pk) MAX. 1.70 V 3 A Off-State Current, Peak Repetitive TJ = 25C @ VD = VDRM RGK =1 k MAX. IDRM TJ = 125C @ VD = VDRM RGK =1 k MAX. 500 A Value Unit TO-92 75 C/W SOT-223 30 C/W SOT-89 50 C/W TO-92 150 C/W SOT-223 60 C/W SOT-89 90 C/W Thermal Resistances Symbol Rth(j-c) Rth(j-a) 1 SxX8xSx Series Description Test Conditions IT = 0.8A (RMS) Junction to case (AC) 1 IT = 0.8A (RMS) Junction to ambient 1 60Hz AC resistive load condition, 100% conduction. 174 Revised: June 15, 2011 01:18 PM (c)2011 Littelfuse, Inc Specifications are subject to change without notice. Please refer to http://www.littelfuse.com for current information. Teccor(R) brand Thyristors EV Series 0.8 Amp Sensitive SCRs Figure 2: N ormalized DC Holding Current vs. Junction Temperature 1.5 3.0 IH 4.0 1.0 IH (TJ = 25C) 2.0 Ratio of IGT Ratio of IGT (TJ = 25C) Figure 1: Normalized DC Gate Trigger Current For All Quadrants vs. Junction Temperature 0.5 0.0 -40 -15 +25 +65 +105 2.0 1.0 0.0 +125 -55 -35 Figure 3: Normalized DC Gate Trigger Voltage vs. Junction Temperature +5 +25 +45 +65 +85 +105 Average On-state Power Dissipation [PD(AV)] - Watts 0.8 0.9 0.8 0.7 0.6 0.5 0.4 0.3 CURRENT WAVEFORM: Sinusoidal LOAD: Resistive or Inductive CONDUCTION ANGLE: 180o 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0.0 0.2 -40 -25 -10 +5 +20 +35 +50 +65 +80 +95 +110 +125 0.0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 RMS On-state Current [IT(RMS)] - Amps Junction Temperature (TJ) - C Figure 5: Maximum Allowable Case Temperature vs. On-State Current Maximum Allowable Case Temperature (TC) - oC 130 CURRENT WAVEFORM: Sinusoidal LOAD: Resistive or Inductive CONDUCTION ANGLE: 180o CASE TEMPERATURE: Measured as shown on dimensional drawings 120 110 SOT-223 & SOT-89 100 90 TO-92 80 70 60 50 0.0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 RMS On-state Current [IT(RMS)] - Amps SxX8xSx Series +125 Figure 4: P ower Dissipation (Typical) vs. RMS On-State Current 1.0 Gate Trigger Voltage (VGT) - V -15 Junction Temperature (TJ) - C Junction Temperature (TJ) - C 175 Revised: June 15, 2011 01:18 PM (c)2011 Littelfuse, Inc Specifications are subject to change without notice. Please refer to http://www.littelfuse.com for current information. 0.8 Teccor(R) brand Thyristors EV Series 0.8 Amp Sensitive SCRs Figure 6: Surge Peak On-State Current vs. Number of Cycles Peak Surge (Non-repetitive) On-State Current (IT S M) - Amps . 20 Supply Frequency: 60Hz Sinusoidal Load: Resistive RMS On-State Current [IT(RMS)]: Max Rated Value at Specific Case Temperature 10 9 8 7 6 Notes: 1. Gate control may be lost during and immediately following surge current interval. 2. Overload may not be repeated until junction temperature has returned to steady-state rated value. 5 4 3 0.8 2 AD evi ces 1 1 2 3 4 5 6 7 8 9 10 20 30 40 60 80 100 200 300 400 600 1000 Surge Current Duration - Full Cycle Soldering Parameters - Temperature Min (Ts(min)) Pre Heat 150C - Temperature Max (Ts(max)) 200C - Time (min to max) (ts) 60 - 180 secs Average ramp up rate (Liquidus Temp) (TL) to peak 5C/second max TS(max) to TL - Ramp-up Rate 5C/second max Reflow SxX8xSx Series Pb - Free assembly - Temperature (TL) (Liquidus) 217C - Time (min to max) (ts) 60 - 150 seconds 260+0/-5 C Time within 5C of actual peak Temperature (tp) 20 - 40 seconds Ramp-down Rate 5C/second max Time 25C to peak Temperature (TP) 8 minutes Max. Do not exceed 280C 176 Revised: June 15, 2011 01:18 PM Ramp-up TL tL TS(max) Preheat TS(min) 25 Peak Temperature (TP) tP TP Temperature Reflow Condition Ramp-do Ramp-down tS time to peak temperature Time (c)2011 Littelfuse, Inc Specifications are subject to change without notice. Please refer to http://www.littelfuse.com for current information. Teccor(R) brand Thyristors EV Series 0.8 Amp Sensitive SCRs Physical Specifications Terminal Finish Reliability/Environmental Tests Test 100% Matte Tin-plated. UL recognized epoxy meeting flammability classification 94V-0. Body Material Lead Material Specifications and Conditions AC Blocking MIL-STD-750, M-1040, Cond A Applied Peak AC voltage @ 110C for 1008 hours Temperature Cycling MIL-STD-750, M-1051, 100 cycles; -40C to +150C; 15-min dwell-time Temperature/ Humidity EIA / JEDEC, JESD22-A101 1008 hours; 320V - DC: 85C; 85% rel humidity High Temp Storage MIL-STD-750, M-1031, 1008 hours; 150C Low-Temp Storage 1008 hours; -40C Thermal Shock MIL-STD-750, M-1056 10 cycles; 0C to 100C; 5-min dwelltime at each temperature; 10 sec (max) transfer time between temperature Autoclave EIA / JEDEC, JESD22-A102 168 hours (121C at 2 ATMs) and 100% R/H Resistance to Solder Heat MIL-STD-750 Method 2031 Solderability ANSI/J-STD-002, category 3, Test A Lead Bend MIL-STD-750, M-2036 Cond E Copper Alloy Design Considerations Careful selection of the correct device for the application's operating parameters and environment will go a long way toward extending the operating life of the Thyristor. Good design practice should limit the maximum continuous current through the main terminals to 75% of the device rating. Other ways to ensure long life for a power discrete semiconductor are proper heat sinking and selection of voltage ratings for worst case conditions. Overheating, overvoltage (including dv/dt), and surge currents are the main killers of semiconductors. Correct mounting, soldering, and forming of the leads also help protect against component damage. Dimensions - TO-92 Dimension A SEATING PLANE C GATE ANODE G CATHODE Millimeters Min Max Min Max A 0.175 0.205 4.450 5.200 B 0.170 0.210 4.320 5.330 TC MEASURING POINT B Inches C 0.500 D 0.135 12.70 E 0.125 0.165 3.180 4.190 F 0.080 0.105 2.040 2.660 3.430 G 0.016 0.021 0.407 0.533 H 0.045 0.055 1.150 1.390 I 0.095 0.105 2.420 2.660 J 0.015 0.020 0.380 0.500 H I D F J E F SxX8xSx Series 177 Revised: June 15, 2011 01:18 PM (c)2011 Littelfuse, Inc Specifications are subject to change without notice. Please refer to http://www.littelfuse.com for current information. Teccor(R) brand Thyristors Anode EV Series 0.8 Amp Sensitive SCRs Gate Cathode Anode Anode Dimensions - SOT-223 Gate Anode Cathode Anode Gate Cathode Anode Inches Dimensions Gate Cathode Anode 3.3 (0.130") 1.5 (0.059") 1.2 (0.047") 6.4 (0.252") 2.3 (0.091") (3x) 1.5 (0.059") 4.6 (0.181") Min Typ Max Min Typ Max A 0.248 0.256 0.264 6.30 6.50 6.70 B 0.130 0.138 0.146 3.30 3.50 3.70 C -- -- 0.071 -- -- 1.80 D 0.001 -- 0.004 0.02 -- 0.10 E 0.114 0.118 0.124 2.90 3.00 3.15 F 0.024 0.027 0.034 0.60 A 0.70 0.85 G -- 0.090 -- -- J 2.30 -- H -- 0.181 -- -- 4.60 -- I 0.264 0.276 0.287 6.70 7.00 7.30 J 0.009 0.010 0.014 BAnode 0.26 0.35 A J K D im ensions in M illim eters (Inches) Recom m ended Soldering Footprint for SO T223 Millimeters Tc Measuring Point 0.24 A D F Cathode G Anode Tc Measuring Point E Anode J F Gate B Cathode C H G Anode D C E H Gate F Cathode G Anode Inches Dimension C Pad Layout for SOT-89 (2.21) .087 (1.12) .044 c (3.91) .154 g (0.91) .036 f d (1.63) .064 e b 178 Revised: June 15, 2011 01:18 PM a Min g Typ Max 0.181 4.40 -- 4.60 0.102 2.29 -- A 0.173 -- B 0.090 -- C 0.055g -- 0.063 1.40 D 0.155 -- 0.167 3.94 E 0.035 0.047 G 0.056 c -- f -- 2.60 f 1.60 -- 4.25 0.89 a -- 1.20 0.062 1.42 -- 1.57 b d -- c Max Typ F (1.19) .047 Millimeters Min H SxX8xSx Series D E B Gate Dimensions in Millimeters (Inches) Anode 10 MAX Dimensions - SOT-89 (1.63) .064 Tc Measuri e 0.115 -- 0.121 2.92 -- 3.07 H 0.014 -- 0.017 0.35 -- 0.44 I 0.014 -- 0.019 0.36 -- 0.48 J 0.064 -- 0.072 1.62 -- 1.83 e b (c)2011 Littelfuse, Inc Specifications are subject to change without notice. Please refer to http://www.littelfuse.com for current information. d Teccor(R) brand Thyristors EV Series 0.8 Amp Sensitive SCRs Product Selector Voltage Part Number Gate Sensitivity Package -- 200 A TO-92 X -- 200 A TO-92 -- X 200 A TO-92 -- -- 200 A SOT-223 400V 600V 800V S4X8ES X -- S6X8ES -- S8X8ES -- S4X8TS X S6X8TS -- X -- 200 A SOT-223 S8X8TS -- -- X 200 A SOT-223 S4X8BS X -- -- 200 A SOT-89 S6X8BS -- X -- 200 A SOT-89 S4X8ES1 X -- -- 5 A TO-92 S6X8ES1 -- X -- 5 A TO-92 S8X8ES1 -- -- X 5 A TO-92 S4X8TS1 X -- -- 5 A SOT-223 S6X8TS1 -- X -- 5 A SOT-223 S8X8TS1 -- -- X 5 A SOT-223 S4X8ES2 X -- -- 50 A TO-92 S6X8ES2 -- X -- 50 A TO-92 S8X8ES2 -- -- X 50 A TO-92 S4X8TS2 X -- -- 50 A SOT-223 S6X8TS2 -- X -- 50 A SOT-223 S8X8TS2 -- -- X 50 A SOT-223 Packing Options Marking Weight Packing Mode Base Quantity SxX8ESy Part Number SxX8ESy 0.170g Bulk 2500 SxX8ESyAP SxX8ESy 0.170g Ammo Pack 2000 SxX8ESyRP SxX8ESy 0.170g Tape & Reel 2000 SxX8TSyRP SxX8TSy 0.120g Tape & Reel 1000 SxX8BSRP xX8 0.053g Tape & Reel 1000 SxX8BSRP1 xX8 0.053g Tape & Reel 1000 Note: x = voltage, y = gate sensitivity SxX8xSx Series 179 Revised: June 15, 2011 01:18 PM (c)2011 Littelfuse, Inc Specifications are subject to change without notice. Please refer to http://www.littelfuse.com for current information. Teccor(R) brand Thyristors EV Series 0.8 Amp Sensitive SCRs TO-92 (3-lead) Reel Pack (RP) Radial Leaded Specifications Meets all EIA-468-C Standards 0.02 (0.5) 0.236 (6.0) 1.6 (41.0) 0.708 (18.0) 0.098 (2.5) MAX 1.26 (32.0) 0.354 (9.0) 0.5 (12.7) Anode Cathode 0.2 (5.08) Gate 0.1 (2.54) 0.157 DIA (4.0) 14.17(360.0) Flat up 1.97 (50.0) Dimensions are in inches (and millimeters). Direction of Feed TO-92 (3-lead) Ammo Pack (AP) Radial Leaded Specifications Meets all EIA-468-C Standards 0.236 (6.0) 1.62 (41.2) 0.708 (18.0) 0.02 (0.5) 0.098 (2.5) MAX 1.27 (32.2) 0.354 (9.0) 0.1 (2.54) 0.5 (12.7) n Directio 0.157 (4.0) DIA Anode Cathode 0.2 (5.08) Gate Flat down of Feed 25 Devices per fold 1.85 (47.0) 12.2 (310.0) 1.85 (47.0) Dimensions are in inches (and millimeters). 13.3 (338.0) SxX8xSx Series 180 Revised: June 15, 2011 01:18 PM (c)2011 Littelfuse, Inc Specifications are subject to change without notice. Please refer to http://www.littelfuse.com for current information. Teccor(R) brand Thyristors EV Series 0.8 Amp Sensitive SCRs SOT-89 Reel Pack (RP) Specifications 8 mm 4 mm O1.5 mm 2 mm ANODE 1.75 mm 12 mm 5.5 mm GATE ANODE CATHODE 180 mm 13 mm Abor Hole Diameter 13.4 mm DIRECTION OF FEED SOT-89 Reel Pack (RP1) Specifications 1.5mm 4mm 8mm 2mm CATHODE ANODE 1.75mm 12mm 5.5mm ANODE GATE 180 mm 13 mm Abor Hole Diameter 13.4 mm DIRECTION OF FEED SxX8xSx Series 181 Revised: June 15, 2011 01:18 PM (c)2011 Littelfuse, Inc Specifications are subject to change without notice. Please refer to http://www.littelfuse.com for current information. Teccor(R) brand Thyristors EV Series 0.8 Amp Sensitive SCRs SOT-223 Reel Pack (RP) Specifications 1.5 mm 8 mm 4 mm 2 mm A 1.75 mm 12 mm 5.5 mm K A GATE 180 mm 13 mm Abor Hole Diameter 13.4 mm Part Numbering System Part Marking System S xX8 x xx xx SERIES S: SCR VOLTAGE 4: 400V 6: 600V 8: 800V CURRENT X8: 0.8A PACKING TYPE Blank: Bulk Pack RP: Reel Pack (TO-92) Embossed Carrier Pack (SOT-223) Embossed Carrier Pack (SOT-89) RP1: Embossed Carrier Pack (SOT-89) (alternate orientation) AP: Ammo Pack (TO-92) SENSITIVITY & TYPE S1: 5A Sensitive SCR S2: 50A Sensitive SCR S: 200A Sensitive SCR SOT223 Line1 = Littelfuse Part Number Line2 = continuation...Littelfuse Part Number Y = Last Digit of Calendar Year M = Letter Month Code (A-L for Jan-Dec) L = Location Code DD = Calendar Date PACKAGE TYPE E: TO-92 T: SOT-223 B: SOT-89 SxX8xSx Series SOT89 TO92 182 Revised: June 15, 2011 01:18 PM (c)2011 Littelfuse, Inc Specifications are subject to change without notice. Please refer to http://www.littelfuse.com for current information.