10 MULTI CONNECTION SYSTEM MINI Headers with Solder Pins, 100 % Protected against Mismating, Pin Spacing 3.81 mm/ 0.15 in (Orange) for PressIn Technique Pins ncing 3.81 mm/0.15 i In, orange Straight solder pin 250 V/2.5 kV/2 300 V, 10 A WA 10A 300 V, 1OAG Mating direction perpendicular to PCB * MEMO Pin spacing 3.81 mm/0.15 in, orange Right angle solder pin 250 V/2.5 kV/2 300 V, 10 A AA 10A 300 V, 1OAG Mating direction parallel to PCB FWECMOM Pin spacing 3.81 mm/0.15 in, orange PressIn Technique 250 V/2.5kV/2 | 300 V 4A Mating direction perpendicular to PCB No. of Item-No. poles No. of Item-No. poles No. of Item-No. poles Closed end headers, 100 % protected against mismating, orange, straight solder pin, 1 mm x 1 mm 2 734-232 3 734-233 4 734-234 5 734-235 6 734-236 8 734-238 10 734-240 12 734-242 14 734-244 16 734-246 Closed end headers, 100 % protected against mismating, orange, right angle solder pin, 1 mm x 1 mm 2 734-262 3 734-263 4 734-264 3 734-265 6 734-266 8 734-268 10 734-270 12 734-272 14 734-274 16 734-276 Closed end headers, PressIn Technique, 100 % protected against mismating, orange, press-in pin 0.6 mm x 0.6 mm 734-232/100-000 734-233/100-000 734-234/100-000 734-235/100-000 734-236/100-000 734-238/100-000 734-240/100-000 734-242/100-000 NowannFk WN Accessories Coding key, snap-on type, light grey 734-130 Coding key, snap-on type, light grey 734-130 Coding key, snap-on type, light grey 734-130 Note: These connectors can only be mated and unmated at voltages below 42 V and in the No load condition. For mating and unmating at low power values, please request data. Dimensions (in mm) Diameter of drilled hole: 1.4* mm Diameter of metal-plated hole: 1.04533 mm Recommend. diam. of drilled hole: @ 1.15* mm ar L = (No. of poles - 1) x pin spacing + 5.9 mm L = (No. of poles - 1) x pin spacing + 5.9 mm *For further approvals with corresponding ratings see pages 10.3 ff. 28 = Sy 381 ft} L = (No. of poles - 1) x pin spacing + 5.9 mm