RO Associates, Inc. • www.roassoc.com • 408-744-1450 • Fax: 408 744-1521 • email: sales@roassoc.com
6
SELECTION GUIDE, MODEL LIST & FEATURES
SUPERVERTER™Selection Guide, Model List & Features
FEATURES
• Direct Replacement for Industr y Standard
• High Efficiency
• High MTBF (1.8 million hours)
• Constant Frequency
• Clamp Over Voltage Protection
• Remote Sense
• Tr im Range: 60% to 110%
• Encapsulated
• High Power Density: up to 87 W/cu.in.
• Low Noise
• -40° to +100° C Baseplate Operation
• Choice of On/Off Logic
• Safety Agency Compliant
• Threaded or Thru Mounting Holes
• Optional Pin lengths
• Over Temperature Protection
Model Selection Guide
Model Input Output Output
Number Voltage Voltage Current
SV48-2.5-150-1 36-75Vdc 2.5Vdc 30A
SV48-2.5-200-1 36-75Vdc 2.5Vdc 50A
SV48-3-150-1 36-75Vdc 3.3Vdc 30A
SV48-3-200-1 36-75Vdc 3.3Vdc 45A
SV48-5-150-1 36-75Vdc 5Vdc 30A
SV48-5-200-1 36-75Vdc 5Vdc 40A
SV48-12-150-1 36-75Vdc 12Vdc 12.5A
SV48-12-200-1 36-75Vdc 12Vdc 20A
SV48-15-150-1 36-75Vdc 15Vdc 10A
SV48-15-200-1 36-75Vdc 15Vdc 16A
SV48-24-150-1 36-75Vdc 24Vdc 6.2A
SV48-24-200-1 36-75Vdc 24Vdc 10A
SV48-28-150-1 36-75Vdc 28Vdc 5.35A
SV48-28-200-1 36-75Vdc 28Vdc 8.6A
Negative logic On/Off is standard. For optional positive
logic delete -1 suffix from model number (see below).
OPTIONAL FEATURES
For the optional features listed below, simply list the appropriate digit(s) for the features you want in
ascending order in the suffix following -150 or -200 in the part number.
Feature Options Suffix
Negative Logic On/Off is standard include “1” in the suffix
Positive Logic On/Off is optional delete “1” from the suffix
Threaded mounting holes, as shown in the outline drawing (p.9) are standard no suffix digit required
Optional thru mounting holes (without threads) of 0.130” inside diameter* include “4” in the suffix
Pin length of 0.20” (5.1mm) is standard no suffix digit required
Pin length of 0.145” (3.68mm)* include “6” in the suffix
Pin length of 0.110” (2.79mm)* include “8” in the suffix
* Minimum order quantities apply.
EXAMPLES:
SV48-5-200-1 Standard module negative logic, threaded inser ts, & 0.20 inch pins.
SV48-5-200-48 Positive logic, through hole inser ts, & 0.110 inch pins.
SV48-5-200-146 Negative logic, through hole inserts, & 0.145 inch pins.
Heat Sinks for SuperVerter modules, of several heights and fin arrangements, are available from RO.
The SuperVerter family of DC-DC
conver ters may be used as for m, fit,
function replacements for industry
standard half-brick modules.