0.8mm pitch connector For PCB Straddle SMT type female connector for PCB HDRA-E68FT+ Straddle SMT ANSI/SFF8441 Configuration of product Part No. HDRA- E 68 FT+ Series name No. of contacts: 68 Type of contact FT: Straddle SMT type, female 4-R 0.5MAX. FT 0.03 13.2 Edge of PCB 5.250.08 o10.1 20.05 20.1 20.05 20.1 POS.#34 POS.#1 0.80.03 5.2 POS.#35 POS.#68 1.250.15 30.1 3.50.1 JAPAN 14.65 HONDA 0.8 13.2 20.08 POS.#1 0.833=26.4 10.1 10.1 1.7REF. 30.20.05 37.70.15 0.450.05 Edge of PCB 0.80.03 30 130.03 (Two lock screws are supplied with a connector.) 42.7 Recommended PCB layout t=1mm POS.#2 37.7 0.833=26.4 : PAD POS.#1 34 1 68 35 25 4.880.08 31.65 34.7 2.40.08 POS.#68 3.46 4.3 0.8 R 37.7 POS.#68 0.8 POS.#35 Recommended panel cut-out dimensions 13 0.833=26.4 Components Insulator A Shell Contacts Insulator B Select the connector according to panel thickness. For the application without panel, use washers or special lock screw (P/N: HDRA-E68LFD-7C). Square nuts Lock screw Mating connector: HDRA series IDC type male cable connector, or straddle SMT type male connector Others Wire wrapping Crimping Soldering IDC Press-in SMT Through hole