MtronPTI reserves the right to make changes to the product(s) and service(s) described herein without notice. No liability is assumed as a result of their use or application.
Please see www.mtronpti.com for our complete offering and detailed datasheets. Contact us for your application specic requirements: MtronPTI 1-800-762-8800.
TTL/CMOS Compatible
Tri-State Feature for Auto Test Systems
Tape & Reel Packaging
±20ppm Available - Please Contact Factory
2553 N. Edgington Street, Franklin Park, IL 60131 yPhone: 847.451.1000 yFax: 847.451.7585
800-888-1499
or
www.champtech.com
1
MODEL CMO5
Frequency Range (MHz) 1.5 to 156.250
Frequency Stability (ppm)
Overall (Typical) Inclusive of calibration, temperature, voltage, load, shock,vibration, aging
0°C to 70°C ±25
-40°C to +85°C ±50
Temperature Range (°C)
Operating -40°C to +85°C
Storage -40°C to +125°C
Supply Voltage (V) +5.0 ±10%
Input Current (mA) 1.5MHz to 30MHz
Symmetry (%) TTL/CMOS 45/55
ELECTRICAL SPECIFICATIONS
Start up Time (ms) <10
PART NUMBERING GUIDE
CMO5XXXX - Specify Frequency
“C” = CMOS
“T” = TTL
“Blank” = 0oC to 70oC Operating Temp.
“M” = -40oC to 85oC Operating Temp.
“A” = ±25ppm (-40oC to 85oC Excluding Aging)
“B” = ±50ppm
“C” = ±100ppm
“D” = ±20ppm Excluding Aging (Contact Factory)
“Blank” = Fixed Frequency
“E” = Tri-State
CMO5 Series
5V 5x7mm Surface Mount Crystal Clock Oscillators
<10
10TTL/15pFLoad
Transistion Times
Rise Time (ns)
Fall Time (ns)
<5
<5
“0” Level (VOL)
“1” Level (VOH)
0.5V
2.4V/4.5V
>30MHz to 50MHz
<30
>50MHz to 156.250MHz
<50
1.5MHz to 50MHz >50MHz to 156.250MHz
<3
<3
THIS PRODUCT IS NOT RECOMMENDED FOR NEW DESIGNS.
PLEASE REFER TO THE M1 PRODUCT SERIES.
Revision: 03-01-07
CMO5 Series
5 x 7 mm, 5.0 Volt, CMOS/TTL, Clock Oscillator
MtronPTI reserves the right to make changes to the product(s) and service(s) described herein without notice. No liability is assumed as a result of their use or application.
Please see www.mtronpti.com for our complete offering and detailed datasheets. Contact us for your application specic requirements: MtronPTI 1-800-762-8800.
2553 N. Edgington Street, Franklin Park, IL 60131 yPhone: 847.451.1000 yFax: 847.451.7585
800-888-1499
or
www.champtech.com
2
OUTPUT WAVEFORM TEST CIRCUIT DIAGRAM
PIN FUNCTION
N/C / Tri-State1
2
3
Ground
Output
4+ VCC
CMO5 Series
5V 5x7mm Surface Mount Crystal Clock Oscillators
TEST METHODS REFERENCE PROCEDURES DESCRIPTION
Temperature Cycle MIL-STD-833, Mtd 1010, Cond. B
Mechanical Shock MIL-STD-883, Mtd 2002, Cond. B
-55°C to +125°C; Air-to-Air; 100 cycles; 10
min. dwell
Vibration MIL-STD 883, Mtd 2007, Cond. B 20-2000 Hz; 0.06 inch; 15g’s; 3 planes
Humidity Steady State MIL-STD-202, Mtd 103 40°C; 90%-95% R.H.; 56 days
Thermal Shock MIL-STD-883, Mtd 1011.7 Cond. B
Electrostatic Discharge
Solderability
Hermeticity
Resistance to Soldering
Lead Integrity
Marking Permanence
Life Test
100°C to 0°C; Water-to-Water; 15 cycles
2 KV to 4 KV Threshold
Solder dip; Meniscograph Criteria
Mass spectro. 2 x 10-8 atmos. CC/sec He
235°C; 30 seconds
Lead tension & bend stress
Resistance to solvents
1500 g’s
MIL-STD-883, Mtd 3015 Class II
MIL-STD-883, Mtd 1005.6
MIL-STD-883, Mtd 2022.2
MIL-STD-883, Mtd 1014.8, Cond. A1
MIL-STD-202, Mtd 210D, Cond. J
MIL-STD-883, Mtd 2004.5, Cond. A, B1
MIL-STD-883, Mtd 2015.8
125°C, powered, 1000 hours minimum
MECHANICAL AND ENVIRONMENTAL SPECIFICATIONS
2553 N. Edgington Street, Franklin Park, IL 60131 yPhone: 847.451.1000 yFax: 847.451.7585
800-888-1499
or
www.champtech.com
2
OUTPUT WAVEFORM TEST CIRCUIT DIAGRAM
PIN FUNCTION
N/C / Tri-State1
2
3
Ground
Output
4+ VCC
CMO5 Series
5V 5x7mm Surface Mount Crystal Clock Oscillators
TEST METHODS REFERENCE PROCEDURES DESCRIPTION
Temperature Cycle MIL-STD-833, Mtd 1010, Cond. B
Mechanical Shock MIL-STD-883, Mtd 2002, Cond. B
-55°C to +125°C; Air-to-Air; 100 cycles; 10
min. dwell
Vibration MIL-STD 883, Mtd 2007, Cond. B 20-2000 Hz; 0.06 inch; 15g’s; 3 planes
Humidity Steady State MIL-STD-202, Mtd 103 40°C; 90%-95% R.H.; 56 days
Thermal Shock MIL-STD-883, Mtd 1011.7 Cond. B
Electrostatic Discharge
Solderability
Hermeticity
Resistance to Soldering
Lead Integrity
Marking Permanence
Life Test
100°C to 0°C; Water-to-Water; 15 cycles
2 KV to 4 KV Threshold
Solder dip; Meniscograph Criteria
Mass spectro. 2 x 10-8 atmos. CC/sec He
235°C; 30 seconds
Lead tension & bend stress
Resistance to solvents
1500 g’s
MIL-STD-883, Mtd 3015 Class II
MIL-STD-883, Mtd 1005.6
MIL-STD-883, Mtd 2022.2
MIL-STD-883, Mtd 1014.8, Cond. A1
MIL-STD-202, Mtd 210D, Cond. J
MIL-STD-883, Mtd 2004.5, Cond. A, B1
MIL-STD-883, Mtd 2015.8
125°C, powered, 1000 hours minimum
MECHANICAL AND ENVIRONMENTAL SPECIFICATIONS
Revision: 03-01-07
THIS PRODUCT IS NOT RECOMMENDED FOR NEW DESIGNS.
PLEASE REFER TO THE M1 PRODUCT SERIES.
CMO5 Series
5 x 7 mm, 5.0 Volt, CMOS/TTL, Clock Oscillator
MtronPTI reserves the right to make changes to the product(s) and service(s) described herein without notice. No liability is assumed as a result of their use or application.
Please see www.mtronpti.com for our complete offering and detailed datasheets. Contact us for your application specic requirements: MtronPTI 1-800-762-8800.
MtronPTI Lead Free Solder Prole
