MC3486 QUADRUPLE DIFFERENTIAL LINE RECEIVER WITH 3-STATE OUTPUTS SLLS097C - JUNE 1980 - REVISED FEBRUARY 2002 D D D D D D, N, OR NS PACKAGE (TOP VIEW) Meets or Exceeds the Requirements of ANSI Standards EIA/TIA-422-B and EIA/TIA-423-B and ITU Recommendations V.10 and V.11 3-State, TTL-Compatible Outputs Fast Transition Times Operates From Single 5-V Supply Designed to Be Interchangeable With Motorola MC3486 1B 1A 1Y 1,2EN 2Y 2A 2B GND 1 16 2 15 3 14 4 13 5 12 6 11 7 10 8 9 VCC 4B 4A 4Y 3,4EN 3Y 3A 3B description The MC3486 is a monolithic quadruple differential line receiver designed to meet the specifications of ANSI Standards TIA/EIA-422-B and TIA/EIA-423-B and ITU Recommendations V.10 and V.11. The MC3486 offers four independent differential-input line receivers that have TTL-compatible outputs. The outputs utilize 3-state circuitry to provide a high-impedance state at any output when the appropriate output enable is at a low logic level. The MC3486 is designed for optimum performance when used with the MC3487 quadruple differential line driver. It is supplied in a 16-pin package and operates from a single 5-V supply. The MC3486 is characterized for operation from 0C to 70C. AVAILABLE OPTIONS PACKAGED DEVICES TA 0C to 70C PLASTIC SMALL OUTLINE (D, NS) PLASTIC DIP (N) MC3486D MC3486NS MC3486N The D package is available taped and reeled. Add the suffix R to the device type (e.g., MC3486DR). The NS package is only available taped and reeled. Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. Motorola is a trademark of Motorola, Incorporated. Copyright 2002, Texas Instruments Incorporated PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters. POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 1 MC3486 QUADRUPLE DIFFERENTIAL LINE RECEIVER WITH 3-STATE OUTPUTS SLLS097C - JUNE 1980 - REVISED FEBRUARY 2002 FUNCTION TABLE (each receiver) DIFFERENTIAL INPUTS A-B ENABLE OUTPUT Y VID 0.2 V - 0.2 V < VID < 0.2 V H H H ? VID - 0.2 V Irrelevant H L L Z Open H ? H = high level, L = low level, Z = high impedance (off), ? = indeterminate logic diagram (positive logic) 1, 2EN 1A 1B 2A 2B 3, 4EN 3A 3B 4A 4B 4 2 1 6 7 3 5 1Y 2Y 12 10 9 14 15 11 13 3Y 4Y schematics of inputs and outputs EQUIVALENT OF EACH INPUT EXCEPT OUTPUT ENABLE VCC VCC 16.8 k NOM Input EQUIVALENT OF OUTPUT ENABLE 960 NOM 85 NOM 8.3 k NOM Output Enable VCC 4.9 k NOM Output 960 NOM 2 TYPICAL OF ALL OUTPUTS POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 MC3486 QUADRUPLE DIFFERENTIAL LINE RECEIVER WITH 3-STATE OUTPUTS SLLS097C - JUNE 1980 - REVISED FEBRUARY 2002 absolute maximum ratings over operating free-air temperature range (unless otherwise noted) Supply voltage, VCC (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 V Input voltage, VI (A or B inputs) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 V Differential input voltage, VID (see Note 2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 V Enable input voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 V Low-level output current, IOL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50 mA Package thermal impedance, JA (see Note 3): D package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73C/W N package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67C/W NS package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67C/W Lead temperature 1,6 mm (1/16 inch) from case for 10 seconds . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 260C Storage temperature range, Tstg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - 65C to 150C Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. NOTES: 1. All voltage values, except differential-input voltage, are with respect to network ground terminal. 2. Differential-input voltage is measured at the noninverting input with respect to the corresponding inverting input. 3. The package thermal impedance is calculated in accordance with JESD 51-7. recommended operating conditions VCC VIC Supply voltage VID VIH Differential input voltage VIL TA Low-level enable input voltage MIN NOM MAX UNIT 4.75 5 5.25 V 7 V 6 V Common-mode input voltage High-level enable input voltage 2 Operating free-air temperature 0 POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 V 0.8 V 70 C 3 MC3486 QUADRUPLE DIFFERENTIAL LINE RECEIVER WITH 3-STATE OUTPUTS SLLS097C - JUNE 1980 - REVISED FEBRUARY 2002 electrical characteristics over recommended ranges of common-mode input voltage, supply voltage, and operating free-air temperature (unless otherwise noted) PARAMETER TEST CONDITIONS VIT + VIT - Differential input high-threshold voltage Differential input low-threshold voltage VO = 2.7 V, VO = 0.5 V, VIK Enable-input clamp voltage II = - 10 mA VOH High level output voltage High-level VID = 0.4 V,, IO = - 0.4 mA,, See Note 4 and Figure 1 VOL Low level output voltage Low-level VID = - 0.4 V,, IO = 8 mA,, See Note 4 and Figure 1 IOZ High impedance state output current High-impedance-state VIL = 0.8 V, VIL = 0.8 V, Differential input bias current Differential-input VCC = 0 V or 5.25 V,, Other inputs at 0 V IIH High level enable input current High-level VI = 5.25 V VI = 2.7 V IIL IOS Low-level enable input current IIB VI = - 0.5 V VID = 3 V, Short-circuit output current MIN IO = - 0.4 mA IO = - 8 mA MAX 0.2 - 0.2 27 2.7 40 - 40 VI = - 10 V VI = - 3 V V A - 3.25 -1.5 VI = 3 V VI = 10 V 1.5 mA 3.25 100 20 VO = 0, V V 05 0.5 VO = 2.7 V VO = 0.5 V V V - 1.5 VID = - 3 V, VID = 3 V, UNIT See Note 5 - 15 A - 100 A - 100 mA ICC Supply current VIL = 0 85 mA The algebraic convention, in which the least positive (most negative) limit is designated as minimum, is used in this data sheet for threshold voltages only. NOTES: 4. Refer to ANSI Standards TIA/EIA-422-B and TIA/EIA-423-B for exact conditions. 5. Only one output should be shorted at a time. switching characteristics, VCC = 5 V, CL = 15 pF, TA = 25C PARAMETER TYP MAX 28 35 ns 27 30 ns Output enable time to high level 13 30 ns Output enable time to low level 20 30 ns 26 35 ns 27 35 ns tPHL tPLH Propagation delay time, high- to low-level output tPZH tPZL tPHZ tPLZ Output disable time from high level 4 Propagation delay time, low- to high-level output TEST CONDITIONS See Figure 2 See Figure 3 Output disable time from low level POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 MIN UNIT MC3486 QUADRUPLE DIFFERENTIAL LINE RECEIVER WITH 3-STATE OUTPUTS SLLS097C - JUNE 1980 - REVISED FEBRUARY 2002 PARAMETER MEASUREMENT INFORMATION 500 VID 500 VOH IOH (-) IOL (+) VOL 2V Figure 1. VOH, VOL 3V Generator (see Note A) Output 51 Input 1.5 V 1.5 V 0V CL = 15 pF (see Note B) tPLH tPHL VOH 1.5 V 1.3 V Output 1.3 V 2V VOL TEST CIRCUIT VOLTAGE WAVEFORMS NOTES: A. The input pulse is supplied by a generator having the following characteristics: PRR 1 MHz, duty cycle = 50%, tr 6 ns, tf 6 ns. B. CL includes probe and stray capacitance. Figure 2. Test Circuit and Voltage Waveforms POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 5 MC3486 QUADRUPLE DIFFERENTIAL LINE RECEIVER WITH 3-STATE OUTPUTS SLLS097C - JUNE 1980 - REVISED FEBRUARY 2002 PARAMETER MEASUREMENT INFORMATION - 1.5 V 1.5 V SW1 Output SW2 2 k 5 k See Note C CL = 15 pF (see Note B) Generator (see Note A) 5V SW3 51 TEST CIRCUIT tPZH Input SW1 to 1.5 V 1.5 V SW2 Open SW3 Closed 0V 1.5 V Input VOH 1.5 V tPZL 4.5 V Output 1.5 V VOL 1.3 V tPHZ tPLZ 3V Input 0V SW1 to 1.5 V SW2 Closed SW3 Closed 1.5 V Input 0V tPHZ 3V SW1 to - 1.5 V SW2 Closed SW3 Closed tPLZ VOH Output SW1 to - 1.5 V SW2 Closed SW3 Open 0V tPZH Output 3V tPZL 3V 0.5 V 1.3 V Output 0.5 V VOL 1.3 V NOTES: A. The input pulse is supplied by a generator having the following characteristics: PRR 1 MHz, duty cycle = 50%, tr 6 ns, tf 6 ns. B. CL includes probe and stray capacitance. C. All diodes are 1N916 or equivalent. Figure 3. Test Circuit and Voltage Waveforms 6 POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 PACKAGE OPTION ADDENDUM www.ti.com 4-Jun-2007 PACKAGING INFORMATION Orderable Device Status (1) Package Type Package Drawing Pins Package Eco Plan (2) Qty MC3486D ACTIVE SOIC D 16 40 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM MC3486DE4 ACTIVE SOIC D 16 40 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM MC3486DG4 ACTIVE SOIC D 16 40 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM MC3486DR ACTIVE SOIC D 16 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM MC3486DRE4 ACTIVE SOIC D 16 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM MC3486DRG4 ACTIVE SOIC D 16 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Lead/Ball Finish MSL Peak Temp (3) MC3486J OBSOLETE CDIP J 16 TBD Call TI MC3486N ACTIVE PDIP N 16 25 Pb-Free (RoHS) CU NIPDAU Call TI N / A for Pkg Type MC3486NE4 ACTIVE PDIP N 16 25 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type MC3486NSR ACTIVE SO NS 16 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM MC3486NSRE4 ACTIVE SO NS 16 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM MC3486NSRG4 ACTIVE SO NS 16 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM (1) The marketing status values are defined as follows: ACTIVE: Product device recommended for new designs. LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect. NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design. PREVIEW: Device has been announced but is not in production. Samples may or may not be available. OBSOLETE: TI has discontinued the production of the device. (2) Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontent for the latest availability information and additional product content details. TBD: The Pb-Free/Green conversion plan has not been defined. Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes. Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and package, or 2) lead-based die adhesive used between the die and leadframe. The component is otherwise considered Pb-Free (RoHS compatible) as defined above. Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight in homogeneous material) (3) MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature. Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. Addendum-Page 1 PACKAGE OPTION ADDENDUM www.ti.com 4-Jun-2007 In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis. Addendum-Page 2 PACKAGE MATERIALS INFORMATION www.ti.com 14-Jul-2012 TAPE AND REEL INFORMATION *All dimensions are nominal Device Package Package Pins Type Drawing SPQ Reel Reel A0 Diameter Width (mm) (mm) W1 (mm) B0 (mm) K0 (mm) P1 (mm) W Pin1 (mm) Quadrant MC3486DR SOIC D 16 2500 330.0 16.4 6.5 10.3 2.1 8.0 16.0 Q1 MC3486NSR SO NS 16 2000 330.0 16.4 8.2 10.5 2.5 12.0 16.0 Q1 Pack Materials-Page 1 PACKAGE MATERIALS INFORMATION www.ti.com 14-Jul-2012 *All dimensions are nominal Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm) MC3486DR MC3486NSR SOIC D 16 2500 333.2 345.9 28.6 SO NS 16 2000 367.0 367.0 38.0 Pack Materials-Page 2 IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and other changes to its semiconductor products and services per JESD46C and to discontinue any product or service per JESD48B. Buyers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. All semiconductor products (also referred to herein as "components") are sold subject to TI's terms and conditions of sale supplied at the time of order acknowledgment. TI warrants performance of its components to the specifications applicable at the time of sale, in accordance with the warranty in TI's terms and conditions of sale of semiconductor products. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where mandated by applicable law, testing of all parameters of each component is not necessarily performed. TI assumes no liability for applications assistance or the design of Buyers' products. Buyers are responsible for their products and applications using TI components. To minimize the risks associated with Buyers' products and applications, Buyers should provide adequate design and operating safeguards. TI does not warrant or represent that any license, either express or implied, is granted under any patent right, copyright, mask work right, or other intellectual property right relating to any combination, machine, or process in which TI components or services are used. Information published by TI regarding third-party products or services does not constitute a license to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from TI under the patents or other intellectual property of TI. Reproduction of significant portions of TI information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. TI is not responsible or liable for such altered documentation. Information of third parties may be subject to additional restrictions. Resale of TI components or services with statements different from or beyond the parameters stated by TI for that component or service voids all express and any implied warranties for the associated TI component or service and is an unfair and deceptive business practice. TI is not responsible or liable for any such statements. Buyer acknowledges and agrees that it is solely responsible for compliance with all legal, regulatory and safety-related requirements concerning its products, and any use of TI components in its applications, notwithstanding any applications-related information or support that may be provided by TI. Buyer represents and agrees that it has all the necessary expertise to create and implement safeguards which anticipate dangerous consequences of failures, monitor failures and their consequences, lessen the likelihood of failures that might cause harm and take appropriate remedial actions. Buyer will fully indemnify TI and its representatives against any damages arising out of the use of any TI components in safety-critical applications. In some cases, TI components may be promoted specifically to facilitate safety-related applications. With such components, TI's goal is to help enable customers to design and create their own end-product solutions that meet applicable functional safety standards and requirements. Nonetheless, such components are subject to these terms. No TI components are authorized for use in FDA Class III (or similar life-critical medical equipment) unless authorized officers of the parties have executed a special agreement specifically governing such use. Only those TI components which TI has specifically designated as military grade or "enhanced plastic" are designed and intended for use in military/aerospace applications or environments. Buyer acknowledges and agrees that any military or aerospace use of TI components which have not been so designated is solely at the Buyer's risk, and that Buyer is solely responsible for compliance with all legal and regulatory requirements in connection with such use. TI has specifically designated certain components which meet ISO/TS16949 requirements, mainly for automotive use. Components which have not been so designated are neither designed nor intended for automotive use; and TI will not be responsible for any failure of such components to meet such requirements. Products Applications Audio www.ti.com/audio Automotive and Transportation www.ti.com/automotive Amplifiers amplifier.ti.com Communications and Telecom www.ti.com/communications Data Converters dataconverter.ti.com Computers and Peripherals www.ti.com/computers DLP(R) Products www.dlp.com Consumer Electronics www.ti.com/consumer-apps DSP dsp.ti.com Energy and Lighting www.ti.com/energy Clocks and Timers www.ti.com/clocks Industrial www.ti.com/industrial Interface interface.ti.com Medical www.ti.com/medical Logic logic.ti.com Security www.ti.com/security Power Mgmt power.ti.com Space, Avionics and Defense www.ti.com/space-avionics-defense Microcontrollers microcontroller.ti.com Video and Imaging www.ti.com/video RFID www.ti-rfid.com OMAP Mobile Processors www.ti.com/omap TI E2E Community e2e.ti.com Wireless Connectivity www.ti.com/wirelessconnectivity Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265 Copyright (c) 2012, Texas Instruments Incorporated