1
FLS CONNECTOR
Connectors for FPC
0.5mm
pitch
Emboss Tape
FJST
Compact connector with just 2.0mm high
after mounting on the PC board.
Available both in normal type and reverse
type.
Features––––––––––––––––––––––––
• Easy location of FPC
The shrouded FPC entry point allows the FPC to be positioned
and hold in place before the connector is locked.
• Zero insertion force mechanism
A ZIF mechanism increases wear resistance and extends the
connector’s mating life.
•
Heat resisting design suitable for surface mounting
The housing is made of heat resisting resin to allow reflow
soldering.
• In-line surface mounting
Has an in-line surface mount tails for easy inspection.
• Two types of connections
The connector is available in either the normal or reverse
configurations. The FPC is positioned with its mating surfaces
facing upward for the normal configured connector, while the
reverse configuration requires that the FPC be positioned with
its mating surfaces facing down. The engineer has greater
freedom in designing his circuitry.
• Embossed tape for automatic mounting
The FLS connector can be packaged in embossed tape for
automatic mounting.
Specifications –––––––––––––––––––
• Current rating: 0.5A AC, DC
• Voltage rating: 50V AC, DC
• Temperature range: -25˚C to +85˚C
(including temperature rise in applying
electrical current)
• Contact resistance: Initial value/40m Ωmax.
After environmental testing/60m Ωmax.
• Insulation resistance: 800M Ωmin.
• Withstanding voltage: 200V AC/minute
• Applicable FPC: Conductor pitch/0.5mm
Conductor width/0.35mm
Mating part thickness/0.3±0.03mm
<
Note
>
FPC to be actually used should be checked for applicability.
*Compliant with RoHS.
*Refer to "General Instruction and Notice when using
Terminals and Connectors" at the end of this catalog.
* Contact JST for details.
Standards ––––––––––––––––––––––
0Recognized E60389
1Certified LR20812
2
Connector –––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
FJST
A
C
3.0
5.5 (0.7) (0.7)
2.4
0.2
0.5
1.91.9
2.0
B
FJST
A
C
3.0
5.5
2.4
0.2
0.5
1.9
2.0
1.9
B
Normal type Reverse type
Circuits Model No.
Normal type Reverse type
Dimensions (mm)
AB C
Q'ty / reel
Material and Finish
6
7
9
10
12
13
15
16
17
18
19
20
22
24
26
28
30
06FLS-SM1-TB
07FLS-SM1-TB
09FLS-SM1-TB
10FLS-SM1-TB
12FLS-SM1-TB
13FLS-SM1-TB
15FLS-SM1-TB
16FLS-SM1-TB
17FLS-SM1-TB
18FLS-SM1-TB
19FLS-SM1-TB
20FLS-SM1-TB
22FLS-SM1-TB
24FLS-SM1-TB
26FLS-SM1-TB
28FLS-SM1-TB
30FLS-SM1-TB
06FLS-RSM1-TB
07FLS-RSM1-TB
09FLS-RSM1-TB
10FLS-RSM1-TB
12FLS-RSM1-TB
-
15FLS-RSM1-TB
16FLS-RSM1-TB
17FLS-RSM1-TB
18FLS-RSM1-TB
19FLS-RSM1-TB
20FLS-RSM1-TB
22FLS-RSM1-TB
24FLS-RSM1-TB
26FLS-RSM1-TB
28FLS-RSM1-TB
30FLS-RSM1-TB
2.5
3.0
4.0
4.5
5.5
6.0
7.0
7.5
8.0
8.5
9.0
9.5
10.5
11.5
12.5
13.5
14.5
3.55
4.05
5.05
5.55
6.55
7.05
8.05
8.55
9.05
9.55
10.05
10.55
11.55
12.55
13.55
14.55
15.55
8.5
9.0
10.0
10.5
11.5
12.0
13.0
13.5
14.0
14.5
15.0
15.5
16.5
17.5
18.5
19.5
20.5
2,000
2,000
2,000
2,000
2,000
2,000
2,000
2,000
2,000
2,000
2,000
2,000
2,000
2,000
2,000
2,000
2,000
Contact: Phosphor bronze, copper-undercoated, tin-plated (reflow treatment)
Slider housing: PA 46, UL94V-0 Receptacle housing: PA 46, UL94V-0
Normal type…natural Normal type…gray
Reverse type…black
Reverse type…natural
Solder tab: Phosphor bronze, copper-undercoated, tin-plated (reflow treatment)
RoHS compliance This product displays (LF)(SN) on a label.
Note: The products listed above are supplied on embossed-tape.
FLS CONNECTOR
3
Note:
1. Tolerances are non-cumulative: ±0.03mm for all centers.
2. The dimensions above should serve as a guideline.
Contact JST for details.
Lead section dimensions of FPC ––––––––––––––––––––––––––––––––––––––––––––
PC board layout (viewed from component side)
––––––––––––––––––––––––––––––––––––––––––
Assembly layout ––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
0.5x(N-1)±0.03
0.5x(N+1)±0.05
5.5
3.0min.
0.35±0.04 0.3±0.03
Reinforcing layer
0.5±0.1
0.5±0.03
3.3±0.1
1.6±0.1
0.15±0.1
0.35±0.05
0.5±0.03
1.2±0.1
5.5
Contact
point
Normal
type
Reverse
type
Contact
point
2.0
Note: N --- Number of circuits
FLS CONNECTOR
