FLS CONNECTOR 0.5mm Emboss Tape Connectors for FPC pitch Features------------------------ * Easy location of FPC The shrouded FPC entry point allows the FPC to be positioned and hold in place before the connector is locked. * Zero insertion force mechanism A ZIF mechanism increases wear resistance and extends the connector's mating life. * Heat resisting design suitable for surface mounting The housing is made of heat resisting resin to allow reflow soldering. * In-line surface mounting Has an in-line surface mount tails for easy inspection. * Two types of connections Compact connector with just 2.0mm high after mounting on the PC board. Available both in normal type and reverse type. The connector is available in either the normal or reverse configurations. The FPC is positioned with its mating surfaces facing upward for the normal configured connector, while the reverse configuration requires that the FPC be positioned with its mating surfaces facing down. The engineer has greater freedom in designing his circuitry. * Embossed tape for automatic mounting The FLS connector can be packaged in embossed tape for automatic mounting. Specifications ------------------- * Current rating: 0.5A AC, DC * Voltage rating: 50V AC, DC * Temperature range: -25C to +85C (including temperature rise in applying electrical current) * Contact resistance: Initial value/40m max. After environmental testing/60m max. * Insulation resistance: 800M min. * Withstanding voltage: 200V AC/minute * Applicable FPC: Conductor pitch/0.5mm Conductor width/0.35mm Mating part thickness/0.30.03mm <Note>FPC to be actually used should be checked for applicability. FJ ST * Compliant with RoHS. * Refer to "General Instruction and Notice when using Terminals and Connectors" at the end of this catalog. * Contact JST for details. Standards ---------------------- 0 1 Recognized E60389 Certified LR20812 1 FLS CONNECTOR Connector --------------------------------------------------------------- Normal type Reverse type 2.4 2.4 0.2 1.9 1.9 0.2 3.0 3.0 C C (0.7) 0.5 2.0 (0.7) 0.5 A B Circuits 1.9 2.0 5.5 FJST FJST 1.9 5.5 A B Dimensions (mm) Model No. C Q'ty / reel Normal type Reverse type A B 6 06FLS-SM1-TB 06FLS-RSM1-TB 2.5 3.55 8.5 2,000 7 07FLS-SM1-TB 07FLS-RSM1-TB 3.0 4.05 9.0 2,000 9 09FLS-SM1-TB 09FLS-RSM1-TB 4.0 5.05 10.0 2,000 10 10FLS-SM1-TB 10FLS-RSM1-TB 4.5 5.55 10.5 2,000 12 12FLS-SM1-TB 12FLS-RSM1-TB 5.5 6.55 11.5 2,000 13 13FLS-SM1-TB - 6.0 7.05 12.0 2,000 15 15FLS-SM1-TB 15FLS-RSM1-TB 7.0 8.05 13.0 2,000 16 16FLS-SM1-TB 16FLS-RSM1-TB 7.5 8.55 13.5 2,000 17 17FLS-SM1-TB 17FLS-RSM1-TB 8.0 9.05 14.0 2,000 18 18FLS-SM1-TB 18FLS-RSM1-TB 8.5 9.55 14.5 2,000 19 19FLS-SM1-TB 19FLS-RSM1-TB 9.0 10.05 15.0 2,000 20 20FLS-SM1-TB 20FLS-RSM1-TB 9.5 10.55 15.5 2,000 22 22FLS-SM1-TB 22FLS-RSM1-TB 10.5 11.55 16.5 2,000 24 24FLS-SM1-TB 24FLS-RSM1-TB 11.5 12.55 17.5 2,000 26 26FLS-SM1-TB 26FLS-RSM1-TB 12.5 13.55 18.5 2,000 28 28FLS-SM1-TB 28FLS-RSM1-TB 13.5 14.55 19.5 2,000 30 30FLS-SM1-TB 30FLS-RSM1-TB 14.5 15.55 20.5 2,000 Material and Finish Contact: Phosphor bronze, copper-undercoated, tin-plated (reflow treatment) Slider housing: PA 46, UL94V-0 Receptacle housing: PA 46, UL94V-0 Normal type...natural Normal type...gray Reverse type...natural Reverse type...black Solder tab: Phosphor bronze, copper-undercoated, tin-plated (reflow treatment) RoHS compliance This product displays (LF)(SN) on a label. Note: The products listed above are supplied on embossed-tape. 2 FLS CONNECTOR Lead section dimensions of FPC -------------------------------------------- 0.5x(N+1)0.05 0.50.1 0.5x(N-1)0.03 0.50.03 0.30.03 0.350.04 5.5 3.0min. Reinforcing layer Note: N --- Number of circuits 1.60.1 0.150.1 PC board layout (viewed from component side) ------------------------------------------ 0.350.05 0.50.03 1.20.1 3.30.1 Note: 1. Tolerances are non-cumulative: 0.03mm for all centers. 2. The dimensions above should serve as a guideline. Contact JST for details. Assembly layout ---------------------------------------------------------- Contact point Reverse type Contact point 3 5.5 2.0 Normal type