LCC120 1-Form-C OptoMOS(R) Relay INTEGRATED CIRCUITS DIVISION Parameters Blocking Voltage Load Current On-Resistance (max) Ratings 250 170 20 Units VP mArms / mADC Description LCC120P is a 250V, 170mA, 20 1-Form-C relay. It is ideal for applications focused on peak load current handling capablilities. This device is perfect for applications where a signal needs to be switched between two different lines. The small 8-lead package makes it an ideal space-saving replacement for a 1-Form-C electromechanical relay (EMR). Features * 3750Vrms Input/Output Isolation * 1-Form-C Solid State Relay * Low Drive Power Requirements (TTL/CMOS Compatible) * High Reliability * Arc-Free With No Snubbing Circuits * FCC Compatible * VDE Compatible * No EMI/RFI Generation * Small 8-pin Package * Machine Insertable, Wave Solderable * Surface Mount Tape & Reel Versions Available Approvals * UL Recognized Component: File E76270 * CSA Certified Component: Certificate # 1175739 * EN/IEC 60950-1 Certified Component: TUV Certificate B 09 07 49410 004 Ordering Information Applications * Telecommunications * Telecom Switching * Tip/Ring Circuits * Modem Switching (Laptop, Notebook, Pocket Size) * Hook Switch * Dial Pulsing * Ground Start * Ringing Injection * Instrumentation * Multiplexers * Data Acquisition * Electronic Switching * I/O Subsystems * Meters (Watt-Hour, Water, Gas) * Medical Equipment--Patient/Equipment Isolation * Security * Aerospace * Industrial Controls Part # LCC120 Description 8-Pin DIP (50/Tube) LCC120S 8-Pin Surface Mount (50/Tube) LCC120STR 8-Pin Surfact Mount Tape & Reel (1000/Reel) Pin Configuration Do Not Use + Control - Control Do Not Use AC/DC Configuration 1 8 2 7 3 6 4 5 Normally Closed Pole Normally Open Pole Switching Characteristics for a Form-C Device IF 90% 10% Form-A ILOAD t on Form-B ILOAD t off 90% 10% t off Pb DS-LCC120-R09 t on e3 www.ixysic.com 1 INTEGRATED CIRCUITS DIVISION LCC120 Absolute Maximum Ratings @ 25C Parameter Blocking Voltage Reverse Input Voltage Input control Current Peak (10ms) Input Power Dissipation 1 Total Power Dissipation 2 Isolation Voltage, Input to Output Operating Temperature Storage Temperature 1 2 Min 3750 -40 -40 Max 250 5 50 1 150 800 +85 +125 Absolute Maximum Ratings are stress ratings. Stresses in excess of these ratings can cause permanent damage to the device. Functional operation of the device at conditions beyond those indicated in the operational sections of this data sheet is not implied. Unit VP V mA A mW mW Vrms C C Derate linearly 1.33mW / C. Derate linearly 6.67mW / C. Electrical Characteristics @ 25C Parameter Output Characteristics Load Current Continuous, AC/DC Configuration Peak On-Resistance, AC/DC Configuration Off-State Leakage Current Switching Speeds Turn-On Turn-Off Output Capacitance Input Characteristics Input Control Current to Activate Input Control Current to Deactivate Input Voltage Drop Reverse Input Current Common Characteristics Capacitance, Input to Output 2 Conditions Symbol Min Typ Max Units t=10ms IL=170mA VL=250VP IL ILPK RON ILEAK - 16 - 170 400 20 1 mArms / mADC mAP VL=50V, f=1MHz ton toff COUT - 50 5 5 - IL=170mA IF=10mA VR=5V IF IF VF IR 0.4 0.9 - 0.7 1.2 - 10 1.4 10 mA mA V A - CI/O - 3 - pF IF=10mA, VL=10V www.ixysic.com A ms pF R09 INTEGRATED CIRCUITS DIVISION LCC120 COMMON PERFORMANCE DATA @25C (Unless Otherwise Noted)* Device Count (N) 30 25 20 15 10 5 0 1.17 1.19 1.21 1.23 Typical Leakage vs. Temperature Measured across Pins 5&6 or 7&8 1.8 0.016 0.014 1.6 1.4 IF=50mA IF=30mA IF=20mA IF=10mA IF=5mA 1.2 1.0 Leakage (PA) LED Forward Voltage Drop (V) 35 Typical LED Forward Voltage Drop vs. Temperature Typical LED Forward Voltage Drop (N=50, IF=5mA) 0.012 0.010 0.008 0.006 0.004 0.002 0.8 -40 1.25 -20 0 20 40 60 80 100 0 -40 120 -20 0 LED Forward Voltage Drop (V) 20 40 60 80 100 Temperature (C) Temperature (C) Energy Rating Curve 1.2 Load Current (A) 1.0 0.8 0.6 0.4 0.2 0 10Ps 100Ps 1ms 10ms 100ms 1s 10s 100s Time FORM-A RELAY PERFORMANCE DATA @25C (Unless Otherwise Noted)* 25 15 10 5 0 1.05 1.35 1.65 1.95 Form-A Typical On-Resistance Distribution (N=50, IF=10mA, IL=170mADC) 30 20 15 10 5 2.25 25 20 15 10 5 0 0.23 0.32 0.41 0.50 0.59 8.5 0.68 8.8 9.1 9.4 9.7 10.0 10.3 Turn-On Time (ms) Turn-Off Time (ms) On-Resistance (:) Form-A Typical IF for Switch Operation (N=50, IL=170mADC) Form-A Typical IF for Switch Dropout (N=50, IL=170mADC) Form-A Typical Blocking Voltage Distribution (N=50) 15 10 5 35 30 20 Device Count (N) 20 25 Device Count (N) Device Count (N) 35 0 0.75 25 Form-A Typical Turn-Off Time (N=50, IF=10mA, IL=170mADC) Device Count (N) 20 Device Count (N) Device Count (N) 25 Form-A Typical Turn-On Time (N=50, IF=10mA, IL=170mADC) 15 10 5 25 20 15 10 5 0 0 1.05 1.75 2.45 3.15 3.85 LED Current (mA) 4.55 5.25 0 1.05 1.75 2.45 3.15 3.85 4.55 LED Current (mA) 5.25 330 340 350 360 370 380 390 Blocking Voltage (VP) *The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. R09 www.ixysic.com 3 INTEGRATED CIRCUITS DIVISION LCC120 FORM-A RELAY PERFORMANCE DATA @25C (Unless Otherwise Noted)* Form-A Typical Turn-On Time vs. LED Forward Current (IL=170mADC) 1.0 6 0.7 0.6 0.5 0.4 Turn-On Time (ms) 0.8 4 3 2 1 0.3 5 0.25 10 15 20 25 30 35 40 45 -20 0 40 60 80 100 -40 -20 0 20 40 60 Form-A Typical Turn-Off Time vs. LED Forward Current (IL=170mADC) Form-A Typical IF for Switch Dropout vs. Temperature (IL=170mADC) Form-A Typical Turn-Off Time vs. Temperature (IF=10mA, IL=170mADC) 6 LED Current (mA) 0.05 0.8 4 3 2 15 20 25 30 35 40 45 -20 0 20 40 60 80 Load Current (mA) 6 4 100 50 0 -50 -100 2 -150 0 20 40 60 0.2 -20 0 80 40 60 Form-A Maximum Load Current vs. Temperature 250 200 IF=30mA IF=20mA IF=10mA 150 100 50 0 -3 100 20 Temperature (C) 150 8 0 0.3 -40 Form-A Typical Load Current vs. Load Voltage (IF=10mA) 10 -20 0.4 100 Load Current (mA) 12 100 0.5 Temperature (C) LED Forward Current (mA) Form-A Typical On-Resistance vs. Temperature (IF=10mA, IL=170mADC) 80 0.6 0 -40 50 100 0.1 0 10 80 0.7 5 1 0 On-Resistance (:) 20 Temperature (C) 0.10 -40 0.4 Temperature (C) 0.15 5 0.6 LED Forward Current (mA) 0.20 0 0.8 0 -40 50 Turn-Off Time (ms) 0 IF=10mA IF=15mA IF=20mA 1.0 0.2 0 0.2 Form-A Typical Turn-On Time vs. Temperature (IL=170mADC) 1.2 5 LED Current (mA) Turn-On Time (ms) 0.9 Turn-Off Time (ms) Form-A Typical IF for Switch Operation vs. Temperature (IL=170mADC) -2 -1 0 1 2 3 Load Voltage (V) Temperature (C) -40 -20 0 20 40 60 80 100 120 Temperature (C) Form-A Typical Blocking Voltage vs. Temperature 350 Blocking Voltage (VP) 345 340 335 330 325 320 315 310 305 -40 -20 0 20 40 60 80 100 Temperature (C) *The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. 4 www.ixysic.com R09 INTEGRATED CIRCUITS DIVISION LCC120 FORM-B RELAY PERFORMANCE DATA @25C (Unless Otherwise Noted)* Form-B Typical Turn-On Time (N=50, IF=10mA, IL=170mADC) 30 30 15 10 20 15 10 0.45 0.55 0.65 0.75 0.6 1.0 1.8 2.2 9.3 2.6 11.1 12.0 12.9 13.8 14.7 On-Resistance (:) Form-B Typical IF for Switch Operation (N=50, IL=170mADC) Form-B Typical IF for Switch Dropout (N=50, IL=170mADC) Form-B Typical Blocking Voltage Distribution (N=50) 25 Device Count (N) 15 10 5 30 25 20 15 10 5 0 1.2 2.0 2.8 3.6 5.2 4.4 1.75 0.45 6 2.45 3.15 3.85 4.55 5.25 0.30 0.25 0.40 1.6 10 15 20 25 30 35 40 45 4 3 2 348 0.25 0.20 0.15 0.10 -20 0 20 40 60 80 0 -40 100 -20 0 20 40 60 Temperature (C) Temperature (C) Form-B Typical Turn-Off Time vs. LED Forward Current (IL=170mADC) Form-B Typical IF for Switch Dropout vs. Temperature (IL=170mADC) Form-B Typical Turn-Off Time vs. Temperature (IL=170mADC) 6 2.5 LED Current (mA) 1.0 0.8 Turn-Off Time (ms) 5 1.2 4 3 2 1 0.6 10 15 20 25 30 35 40 LED Forward Current (mA) 45 50 80 100 80 100 IF=10mA IF=15mA IF=20mA 2.0 1.5 1.0 0.5 0 0 0.4 365 0.30 LED Forward Current (mA) 1.4 5 331 0.05 -40 50 314 0.35 0 5 297 Form-B Typical Turn-On Time vs. Temperature (IF=10mA, IL=170mADC) 1 0.20 280 Form-B Typical IF for Switch Operation vs. Temperature (IL=170mADC) Turn-On Time (ms) LED Current (mA) 0.35 263 Blocking Voltage (VP) 5 0.40 10 LED Current (mA) LED Current (mA) Form-B Typical Turn-On Time vs.LED Forward Current (IL=170mADC) 15 0 1.05 6.0 20 5 0 0 10.2 Turn-Off Time (ms) 20 0 10 Turn-On Time (ms) 25 Turn-On Time (ms) 1.4 Device Count (N) 30 0.35 15 0 0 0.25 20 5 5 0 Form-B Typical On-Resistance Distribution (N=50, IF=10mA, IL=170mADC) 25 Device Count (N) 20 5 Turn-Off Time (ms) 30 25 Device Count (N) Device Count (N) 25 Device Count (N) Form-B Typical Turn-Off Time (N=50, IF=10mA, IL=170mADC) -40 -20 0 20 40 60 Temperature (C) 80 100 -40 -20 0 20 40 60 Temperature (C) *The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. R09 www.ixysic.com 5 INTEGRATED CIRCUITS DIVISION LCC120 FORM-B RELAY PERFORMANCE DATA @25C (Unless Otherwise Noted)* 150 50 Load Current (mA) On-Resistance (:) 60 40 30 20 Form-B Typical Load Current vs. Load Voltage (IF=10mA) 100 50 0 -50 -100 10 -150 0 -40 -20 0 20 40 60 80 200 150 100 50 0 -4 100 Form B Maximum Load Current vs. Temperature (IF=10mA) 250 Load Current (mA) Form-B Typical On-Resistance vs. Temperature (IF=10mA, IL=170mADC) -3 -2 -1 0 1 2 3 4 Load Voltage (V) Temperature (C) -40 -20 0 20 40 60 80 100 120 Temperature (C) Form-B Typical Blocking Voltage vs. Temperature Blocking Voltage (VP) 320 310 300 290 280 270 260 250 240 -40 -20 0 20 40 60 80 100 Temperature (C) *The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. 6 www.ixysic.com R09 INTEGRATED CIRCUITS DIVISION LCC120 Manufacturing Information Moisture Sensitivity All plastic encapsulated semiconductor packages are susceptible to moisture ingression. IXYS Integrated Circuits Division classified all of its plastic encapsulated devices for moisture sensitivity according to the latest version of the joint industry standard, IPC/JEDEC J-STD-020, in force at the time of product evaluation. We test all of our products to the maximum conditions set forth in the standard, and guarantee proper operation of our devices when handled according to the limitations and information in that standard as well as to any limitations set forth in the information or standards referenced below. Failure to adhere to the warnings or limitations as established by the listed specifications could result in reduced product performance, reduction of operable life, and/or reduction of overall reliability. This product carries a Moisture Sensitivity Level (MSL) rating as shown below, and should be handled according to the requirements of the latest version of the joint industry standard IPC/JEDEC J-STD-033. Device Moisture Sensitivity Level (MSL) Rating LCC120 / LCC120S MSL 1 ESD Sensitivity This product is ESD Sensitive, and should be handled according to the industry standard JESD-625. Reflow Profile This product has a maximum body temperature and time rating as shown below. All other guidelines of J-STD-020 must be observed. Device Maximum Temperature x Time LCC120 / LCC120S 250C for 30 seconds Board Wash IXYS Integrated Circuits Division recommends the use of no-clean flux formulations. However, board washing to remove flux residue is acceptable. Since IXYS Integrated Circuits Division employs the use of silicone coating as an optical waveguide in many of its optically isolated products, the use of a short drying bake could be necessary if a wash is used after solder reflow processes. Chlorine- or Fluorine-based solvents or fluxes should not be used. Cleaning methods that employ ultrasonic energy should not be used. Pb R09 e3 www.ixysic.com 7 INTEGRATED CIRCUITS DIVISION LCC120 Mechanical Dimensions LCC120 9.652 0.381 (0.380 0.015) 2.540 0.127 (0.100 0.005) 8-0.800 DIA. (8-0.031 DIA.) 2.540 0.127 (0.100 0.005) 9.144 0.508 (0.360 0.020) 6.350 0.127 (0.250 0.005) Pin 1 PCB Hole Pattern 7.620 0.254 (0.300 0.010) 6.350 0.127 (0.250 0.005) 0.457 0.076 (0.018 0.003) 3.302 0.051 (0.130 0.002) 7.620 0.127 (0.300 0.005) 7.239 TYP. (0.285) 4.064 TYP (0.160) 0.254 0.0127 (0.010 0.0005) 7.620 0.127 (0.300 0.005) Dimensions mm (inches) 0.813 0.102 (0.032 0.004) LCC120S 9.652 0.381 (0.380 0.015) 2.540 0.127 (0.100 0.005) 0.635 0.127 (0.025 0.005) 3.302 0.051 (0.130 0.002) 9.525 0.254 (0.375 0.010) 6.350 0.127 (0.250 0.005) Pin 1 0.457 0.076 (0.018 0.003) PCB Land Pattern 2.54 (0.10) 8.90 (0.3503) 1.65 (0.0649) 7.620 0.254 (0.300 0.010) 0.254 0.0127 (0.010 0.0005) 0.65 (0.0255) 4.445 0.127 (0.175 0.005) Dimensions mm (inches) 0.813 0.102 (0.032 0.004) LCC120STR Tape & Reel 330.2 DIA. (13.00 DIA.) Top Cover Tape Thickness 0.102 MAX. (0.004 MAX.) K0 =4.90 (0.193) K1 =4.20 (0.165) Embossed Carrier Embossment W=16.00 (0.63) Bo=10.30 (0.406) Ao=10.30 (0.406) P=12.00 (0.472) User Direction of Feed Dimensions mm (inches) NOTES: 1. Dimensions carry tolerances of EIA Standard 481-2 2. Tape complies with all "Notes" for constant dimensions listed on page 5 of EIA-481-2 For additional information please visit our website at: www.ixysic.com IXYS Integrated Circuits Division makes no representations or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications and product descriptions at any time without notice. Neither circuit patent licenses nor indemnity are expressed or implied. Except as set forth in IXYS Integrated Circuits Division's Standard Terms and Conditions of Sale, IXYS Integrated Circuits Division assumes no liability whatsoever, and disclaims any express or implied warranty, relating to its products including, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right. The products described in this document are not designed, intended, authorized or warranted for use as components in systems intended for surgical implant into the body, or in other applications intended to support or sustain life, or where malfunction of IXYS Integrated Circuits Division's product may result in direct physical harm, injury, or death to a person or severe property or environmental damage. IXYS Integrated Circuits Division reserves the right to discontinue or make changes to its products at any time without notice. 8 Specification: DS-LCC120-R09 (c)Copyright 2012, IXYS Integrated Circuits Division OptoMOS(R) is a registered trademark of IXYS Integrated Circuits Division All rights reserved. Printed in USA. 12/22/2012