RL-1386 SWINGDUCTORTM SELF LEADED DESCRIPTION FEATURES & APPLICATIONS * Swinging Choke In Toroid Packaging * Primarily designed for use in applications that require a known inductance change with changing current loads in power supplies * Special core material allows "controlled saturation" for a repeatable specific inductance value at a specific current up to 1 MHz. * As a result of the toroidal design, Swingductors produce a closed magnetic field resulting in low EMI ENVIRONMENTAL DATA * Storage temperature range: -55C to +130C * Operating temperature range: -40C to +130C PACKAGING INFORMATION * Packaging information: pg. 493 Verify operation with sample in actual circuit. Order samples at www.rencousa.com. MECHANICAL DIMENSIONS U.S. Standard (mm) PART NUMBER A (MAX.) B (MAX.) C (MIN.) D (NOM.) PART WEIGHT RL-1386-1 1.100 (27.940) 0.500 (12.700) 0.375 (9.52) 0.375 (9.524) 12.0g (0.42oz) RL-1386-2 1.450 (36.830) 0.875 (22.225) 0.375 (9.52) 0.625 (15.875) 40.0g (1.41oz) RL-1386-3 1.800 (45.720) 0.900 (22.860) 0.375 (9.52) 0.775 (19.685) 62.0g (2.19oz) RL-1386-4 2.000 (50.800) 1.100 (27.940) 0.375 (9.52) 0.950 (24.130) 124.0g (4.37oz) RL-1386-5 2.600 (66.040) 1.500 (38.100) 0.375 (9.52) 1.200 (30.480) 228.0g (8.04 oz) FRONT VIEW SIDE VIEW A SCHEMATIC B ST TIN TO WITHIN 0.062 (1.57) OF MOUNTING PLANE FN C D TOROIDS * EASILY FORMABLE RENCO ELECTRONICS INC. 396 595 International Place, Rockledge, FL 32955-4200 USA * www.rencousa.com * ISO 9001 Certified Toll Free Engineering Hot Line: 800.645.5828 * P: 321.637.1000 * F: 321.637.1600 RL-1386-1 L@ 0 Amps D.C. (H) 25% DCR Max. (Ohms) Irms (A) Max. 0% L Drop (DC Amps) 10% L Drop (DC Amps) 20% L Drop (DC Amps) 30% L Drop (DC Amps) 40% L Drop (DC Amps) 50% L Drop (DC Amps) Lead Dia. in. (mm) RL-1386-1-1.1 1.1 0.005 5.0 4.70 13.00 19.40 26.80 35.10 46.1 0.039 (1.00) RL-1386-1-1.8 1.8 0.006 5.0 3.70 10.30 15.50 21.40 28.10 36.9 0.039 (1.00) RL-1386-1-2.3 2.3 0.007 5.0 3.10 8.60 12.90 17.90 23.40 30.7 0.039 (1.00) RL-1386-1-3.3 3.3 0.007 5.0 2.60 7.40 11.70 15.30 20.10 26.4 0.039 (1.00) RL-1386-1-4.7 4.7 0.008 5.0 2.30 6.50 9.70 13.40 17.60 23.10 0.039 (1.00) RL-1386-1-5.6 5.6 0.009 5.0 2.10 5.70 8.60 11.90 15.60 20.50 0.039 (1.00) RL-1386-1-6.8 6.8 0.010 5.0 1.90 5.20 7.50 10.70 14.10 18.50 0.039 (1.00) RL-1386-1-8.2 8.2 0.010 5.0 1.70 4.70 7.10 9.70 12.80 16.80 0.039 (1.00) RL-1386-1-10 10.0 0.011 5.0 1.50 4.30 6.50 8.90 11.70 15.40 0.039 (1.00) RL-1386-1-12 12.0 0.012 5.0 1.30 3.70 5.60 7.70 10.10 13.20 0.039 (1.00) RL-1386-1-15 15.0 0.013 5.0 1.20 3.20 4.80 6.70 8.80 11.50 0.039 (1.00) RL-1386-1-18 18.0 0.014 5.0 0.96 2.70 4.10 5.60 7.40 9.70 0.039 (1.00) RL-1386-1-22 22.0 0.015 5.0 0.92 2.60 3.90 5.40 7.10 9.30 0.039 (1.00) RL-1386-1-27 27.0 0.016 5.0 0.84 2.40 3.50 4.90 6.40 8.40 0.039 (1.00) RL-1386-1-33 33.0 0.016 5.0 0.74 2.10 3.10 4.30 5.60 7.40 0.039 (1.00) RL-1386-1-39 39.0 0.018 5.0 0.68 1.90 2.90 4.00 5.20 6.80 0.039 (1.00) RL-1386-1-47 47.0 0.019 5.0 0.61 1.70 2.60 3.60 4.70 6.20 0.039 (1.00) RL-1386-1-56 56.0 0.022 5.0 0.58 1.60 2.40 3.40 4.40 5.80 0.039 (1.00) RL-1386-1-68 68.0 0.023 5.0 0.52 1.50 2.20 3.10 4.00 5.30 0.039 (1.00) RL-1386-1-82 82.0 0.025 5.0 0.47 1.30 2.00 2.80 3.60 4.70 0.039 (1.00) RL-1386-1-100 100.0 0.029 5.0 0.43 1.20 1.90 2.60 3.50 4.40 0.039 (1.00) RL-1386-1-120 120.0 0.032 5.0 0.40 1.10 1.70 2.30 3.10 4.00 0.039 (1.00) RL-1386-1-150 150.0 0.036 5.0 0.36 1.00 1.50 2.10 2.80 3.60 0.039 (1.00) RL-1386-1-180 180.0 0.044 5.0 0.30 0.92 1.40 1.90 2.80 3.30 0.039 (1.00) RL-1386-1-220 220.0 0.054 4.5 0.30 0.83 1.20 1.70 2.50 3.00 0.037 (0.95) RL-1386-1-270 270.0 0.061 4.5 0.27 0.79 1.40 1.60 2.30 2.70 0.037 (0.95) RL-1386-1-330 330.0 0.088 3.5 0.23 0.64 1.60 1.30 2.10 2.30 0.031 (0.80) RL-1386-1-390 390.0 0.096 3.5 0.21 0.60 0.90 1.30 1.80 2.20 0.031 (0.80) RL-1386-1-470 470.0 0.110 3.5 0.20 0.57 0.85 1.20 1.60 2.10 0.031 (0.80) RL-1386-1-560 560.0 0.172 2.0 0.18 0.50 0.74 1.00 1.40 1.80 0.025 (0.65) RL-1386-1-680 680.0 0.198 2.0 0.16 0.46 0.68 0.95 1.30 1.70 0.025 (0.65) RL-1386-1-820 820.0 0.250 1.5 0.15 0.42 0.64 0.89 1.20 1.50 0.023 (0.60) RL-1386-1-1000 1000.0 0.286 1.5 0.14 0.38 0.57 0.79 1.20 1.40 0.023 (0.60) RL-1386-1-1200 1200.0 0.407 1.2 0.12 0.33 0.50 0.68 0.90 1.20 0.020 (0.50) RL-1386-1-1500 1500.0 0.469 1.2 0.11 0.30 0.44 0.61 0.81 1.10 0.020 (0.50) NOTES: 1. INDUCTANCE MEASURED AT 1 kHz, 0.1 Vrms 2. ELECTRICAL SPECIFICATIONS MEASURED AT 25C 3. SATURATION CURRENTS SHOWN ARE FOR MAXIMUM L DROP INDICATED, I.E., IF 20% DROP FOR A 100H CHOKE IS AT 2 AMPS, THE L WILL BE APPROX. 80H (60H MIN.) 4. LEADS FOR PC MOUNTING TINNED TO WITHIN 1/16" OF BODY 5. ENCAPSULATION AVAILABLE 6. NONSTANDARD VALUES AVAILABLE ON REQUEST 7. HORIZONTAL MOUNTED UNITS ALSO AVAILABLE 8. ADDITIONAL MOUNTING IS RECOMMENDED ON LARGER UNITS AND UNITS WOUND WITH FINER WIRE 9. DRIVE LEVEL AT WHICH YOU TEST IS IMPORTANT 10. Irms - CURRENT THAT CAUSES THE TEMPERATURE TO RISE APPROX. 40C ABOVE AMBIENT OF 25C RENCO ELECTRONICS INC. 595 International Place, Rockledge, FL 32955-4200 USA * www.rencousa.com * ISO 9001 Certified Toll Free Engineering Hot Line: 800.645.5828 * P: 321.637.1000 * F: 321.637.1600 397 TOROIDS Renco Part No. RL-1386-1 RL-1386-2 Renco Part No. RL-1386-2 L@ 0 Amps D.C. (H) 25% DCR Max. (Ohms) Irms (A) Max. 0% L Drop (DC Amps) 10% L Drop (DC Amps) 20% L Drop (DC Amps) 30% L Drop (DC Amps) 40% L Drop (DC Amps) 50% L Drop (DC Amps) Lead Dia. in. (mm) RL-1386-2-1.2 1.2 0.005 5.0 7.70 21.70 32.70 45.00 59.10 77.70 0.039 (1.00) RL-1386-2-2.0 2.0 0.006 5.0 8.80 15.40 24.50 33.80 44.30 58.20 0.039 (1.00) RL-1386-2-3.3 3.3 0.007 5.0 4.70 13.10 19.60 27.00 35.50 46.60 0.039 (1.00) RL-1386-2-4.7 4.7 0.008 5.0 3.90 10.90 16.40 22.50 29.50 39.80 0.039 (1.00) RL-1386-2-6.8 6.8 0.009 5.0 3.30 9.30 14.00 19.30 25.30 33.30 0.039 (1.00) RL-1386-2-8.2 8.2 0.010 5.0 2.90 8.10 12.30 16.90 22.10 29.10 0.039 (1.00) RL-1386-2-10 10.0 0.011 5.0 2.60 7.30 10.90 15.00 20.00 25.80 0.039 (1.00) RL-1386-2-12 12.0 0.012 5.0 2.30 6.60 9.80 13.50 17.70 23.30 0.039 (1.00) RL-1386-2-15 15.0 0.012 5.0 2.10 5.90 8.90 12.30 16.10 21.20 0.039 (1.00) RL-1386-2-18 18.0 0.013 5.0 1.90 5.50 8.20 11.30 14.80 18.90 0.039 (1.00) RL-1386-2-22 22.0 0.014 5.0 1.80 5.00 7.50 10.40 13.60 17.40 0.039 (1.00) RL-1386-2-27 27.0 0.016 5.0 1.60 4.40 6.50 9.00 11.80 15.50 0.039 (1.00) RL-1386-2-33 33.0 0.018 5.0 1.40 3.80 5.80 7.90 10.40 13.70 0.039 (1.00) RL-1386-2-39 39.0 0.019 5.0 1.20 3.40 5.20 7.10 9.30 12.20 0.039 (1.00) RL-1386-2-47 47.0 0.022 5.0 1.20 3.30 4.90 6.80 8.80 11.60 0.039 (1.00) RL-1386-2-56 56.0 0.024 5.0 1.00 2.80 4.30 5.90 7.70 10.10 0.039 (1.00) RL-1386-2-68 68.0 0.028 5.0 0.93 2.60 3.90 5.10 7.00 9.30 0.039 (1.00) RL-1386-2-82 82.0 0.030 5.0 0.83 2.30 3.50 4.80 6.30 8.30 0.039 (1.00) RL-1386-2-100 100.0 0.032 5.0 0.75 2.10 3.20 4.40 5.70 7.50 0.039 (1.00) RL-1386-2-120 120.0 0.036 5.0 0.70 1.90 3.00 4.10 5.30 7.00 0.039 (1.00) RL-1386-2-150 150.0 0.042 5.0 0.64 1.80 2.70 3.70 4.90 6.40 0.039 (1.00) RL-1386-2-180 180.0 0.046 5.0 0.57 1.50 2.40 3.30 4.30 5.70 0.039 (1.00) RL-1386-2-220 220.0 0.053 5.0 0.51 1.50 2.20 3.00 3.90 5.10 0.039 (1.00) RL-1386-2-270 270.0 0.059 5.0 0.48 1.30 2.00 2.80 3.60 4.80 0.039 (1.00) RL-1386-2-330 330.0 0.064 5.0 0.43 1.20 1.80 2.50 3.30 4.30 0.039 (1.00) RL-1386-2-390 390.0 0.068 5.0 0.39 1.10 1.70 2.30 3.00 3.90 0.039 (1.00) RL-1386-2-470 470.0 0.076 5.0 0.36 1.00 1.50 2.10 2.70 3.60 0.039 (1.00) RL-1386-2-560 560.0 0.086 5.0 0.32 0.90 1.40 1.90 2.50 3.20 0.039 (1.00) RL-1386-2-680 680.0 0.131 4.5 0.29 0.81 1.20 1.70 2.20 2.90 0.039 (1.00) RL-1386-2-820 820.0 0.143 4.5 0.26 0.74 1.10 1.50 2.00 2.60 0.039 (1.00) RL-1386-2-1000 1000.0 0.161 4.5 0.24 0.67 1.00 1.40 1.80 2.40 0.039 (1.00) RL-1386-2-1200 1200.0 0.180 3.5 0.21 0.59 0.89 1.20 1.60 2.10 0.039 (1.00) RL-1386-2-1500 1500.0 0.340 2.0 0.19 0.52 0.78 1.10 1.40 1.90 0.039 (1.00) RL-1386-2-1800 1800.0 0.371 2.0 0.17 0.48 0.72 0.99 1.30 1.70 0.039 (1.00) RL-1386-2-2200 22000 0.432 2.0 0.15 0.43 0.65 0.90 1.20 1.60 0.035 (0.90) RL-1386-2-2700 2700.0 0.520 2.0 0.12 0.38 0.58 0.78 1.10 1.40 0.035 (0.90) TOROIDS NOTES: 1. INDUCTANCE MEASURED AT 1 kHz, 0.1 Vrms 2. ELECTRICAL SPECIFICATIONS MEASURED AT 25C 3. SATURATION CURRENTS SHOWN ARE FOR MAXIMUM L DROP INDICATED, I.E., IF 20% DROP FOR A 100H CHOKE IS AT 2 AMPS, THE L WILL BE APPROX. 80H (60H MIN.) 4. LEADS FOR PC MOUNTING TINNED TO WITHIN 1/16" OF BODY 5. ENCAPSULATION AVAILABLE 6. NONSTANDARD VALUES AVAILABLE ON REQUEST 7. HORIZONTAL MOUNTED UNITS ALSO AVAILABLE 8. ADDITIONAL MOUNTING IS RECOMMENDED ON LARGER UNITS AND UNITS WOUND WITH FINER WIRE 9. DRIVE LEVEL AT WHICH YOU TEST IS IMPORTANT 10. Irms - CURRENT THAT CAUSES THE TEMPERATURE TO RISE APPROX. 40C ABOVE AMBIENT OF 25C RENCO ELECTRONICS INC. 398 595 International Place, Rockledge, FL 32955-4200 USA * www.rencousa.com * ISO 9001 Certified Toll Free Engineering Hot Line: 800.645.5828 * P: 321.637.1000 * F: 321.637.1600 RL-1386-3 L@ 0 Amps D.C. (H) 25% DCR Max. (Ohms) Irms (A) Max. 0% L Drop (DC Amps) 10% L Drop (DC Amps) 20% L Drop (DC Amps) 30% L Drop (DC Amps) 40% L Drop (DC Amps) 50% L Drop (DC Amps) Lead Dia. in. (mm) RL-1386-3-1.5 1.5 0.004 9.0 8.60 23.70 39.20 54.90 73.20 96.30 0.051 (1.30) RL-1386-3-2.2 2.2 0.004 9.0 6.40 17.70 29.40 41.10 54.90 72.20 0.051 (1.30) RL-1386-3-3.3 3.3 0.005 9.0 5.10 14.10 23.60 32.90 43.90 57.80 0.051 (1.30) RL-1386-3-5.6 5.6 0.005 9.0 4.20 11.80 19.60 27.50 36.60 48.20 0.051 (1.30) RL-1386-3-6.8 6.8 0.006 9.0 3.60 10.10 16.80 23.50 31.40 41.20 0.051 (1.30) RL-1386-3-10 10.0 0.006 9.0 2.80 7.80 13.10 18.30 24.40 32.10 0.051 (1.30) RL-1386-3-12 12.0 0.007 9.0 2.60 7.10 11.80 16.50 22.00 28.90 0.051 (1.30) RL-1386-3-15 15.0 0.007 9.0 2.30 6.50 9.90 14.90 19.90 26.10 0.051 (1.30) RL-1386-3-18 18.0 0.008 9.0 2.10 5.90 9.80 13.70 18.30 24.00 0.051 (1.30) RL-1386-3-22 22.0 0.010 9.0 1.90 5.50 9.00 12.60 16.80 22.10 0.051 (1.30) RL-1386-3-27 27.0 0.011 9.0 1.70 4.70 7.80 11.00 14.60 19.30 0.051 (1.30) RL-1386-3-33 33.0 0.012 9.0 1.50 4.40 7.30 10.30 13.70 18.00 0.051 (1.30) RL-1386-3-39 39.0 0.013 9.0 1.40 3.90 6.50 9.10 12.20 16.00 0.051 (1.30) RL-1386-3-47 47.0 0.014 9.0 1.30 3.60 5.90 8.20 11.00 14.40 0.051 (1.30) RL-1386-3-56 56.0 0.016 9.0 1.10 3.20 5.30 7.50 9.90 13.10 0.051 (1.30) RL-1386-3-68 68.0 0.017 9.0 0.99 3.00 4.90 6.80 9.10 12.00 0.051 (1.30) RL-1386-3-82 82.0 0.019 9.0 0.90 2.70 4.50 6.30 8.40 11.10 0.051 (1.30) RL-1386-3-100 100.0 0.022 9.0 0.88 2.40 4.10 5.70 7.60 9.90 0.051 (1.30) RL-1386-3-120 120.0 0.024 9.0 0.80 2.20 3.60 5.10 6.80 9.30 0.051 (1.30) RL-1386-3-150 150.0 0.026 9.0 0.73 2.00 3.30 4.70 6.20 8.20 0.051 (1.30) RL-1386-3-180 180.0 0.029 9.0 0.68 1.90 3.10 4.30 5.80 7.60 0.051 (1.30) RL-1386-3-220 220.0 0.032 9.0 0.58 1.60 2.60 3.70 5.00 6.50 0.051 (1.30) RL-1386-3-270 270.0 0.035 9.0 0.55 1.50 2.50 3.50 4.80 6.20 0.051 (1.30) RL-1386-3-330 330.0 0.040 9.0 0.50 1.40 2.30 3.20 4.30 5.70 0.051 (1.30) RL-1386-3-390 390.0 0.054 7.0 0.47 1.30 2.10 3.00 4.00 5.30 0.047 (1.20) RL-1386-3-470 470.0 0.061 7.0 0.43 1.20 2.00 2.80 3.70 4.80 0.047 (1.20) RL-1386-3-560 560.0 0.068 7.0 0.38 1.00 1.70 2.40 3.20 4.30 0.047 (1.20) RL-1386-3-680 680.0 0.090 5.0 0.34 0.93 1.60 2.20 2.90 3.80 0.039 (1.00) RL-1386-3-820 820.0 0.148 3.5 0.31 0.86 1.40 2.00 2.70 3.50 0.031 (0.80) RL-1386-3-1000 1000.0 0.172 3.5 0.27 0.75 1.20 1.70 2.30 3.00 0.031 (0.80) RL-1386-3-1200 1200.0 0.190 3.5 0.25 0.68 1.10 1.60 2.10 2.80 0.031 (0.80) RL-1386-3-1500 1500.0 0.210 3.5 0.22 0.61 1.00 1.40 1.90 2.50 0.031 (0.80) RL-1386-3-1800 1800.0 0.232 3.5 0.21 0.57 0.94 1.30 1.80 2.30 0.031 (0.80) RL-1386-3-2200 2200.0 0.412 2.0 0.18 0.49 0.81 1.10 1.50 2.00 0.025 (0.65) RL-1386-3-2700 2700.0 0.450 2.0 0.16 0.45 0.76 1.10 1.40 1.90 0.025 (0.65) RL-1386-3-3300 3300.0 0.500 2.0 0.15 0.41 0.69 0.96 1.30 1.70 0.025 (0.65) RL-1386-3-3900 3900.0 0.541 2.0 0.14 0.38 0.63 0.87 1.20 1.50 0.025 (0.65) NOTES: 1. INDUCTANCE MEASURED AT 1 kHz, 0.1 Vrms 2. ELECTRICAL SPECIFICATIONS MEASURED AT 25C 3. SATURATION CURRENTS SHOWN ARE FOR MAXIMUM L DROP INDICATED, I.E., IF 20% DROP FOR A 100H CHOKE IS AT 2 AMPS, THE L WILL BE APPROX. 80H (60H MIN.) 4. LEADS FOR PC MOUNTING TINNED TO WITHIN 1/16" OF BODY 5. ENCAPSULATION AVAILABLE 6. NONSTANDARD VALUES AVAILABLE ON REQUEST 7. HORIZONTAL MOUNTED UNITS ALSO AVAILABLE 8. ADDITIONAL MOUNTING IS RECOMMENDED ON LARGER UNITS AND UNITS WOUND WITH FINER WIRE 9. DRIVE LEVEL AT WHICH YOU TEST IS IMPORTANT 10. Irms - CURRENT THAT CAUSES THE TEMPERATURE TO RISE APPROX. 40C ABOVE AMBIENT OF 25C RENCO ELECTRONICS INC. 595 International Place, Rockledge, FL 32955-4200 USA * www.rencousa.com * ISO 9001 Certified Toll Free Engineering Hot Line: 800.645.5828 * P: 321.637.1000 * F: 321.637.1600 399 TOROIDS Renco Part No. RL-1386-3 RL-1386-4 Renco Part No. RL-1386-4 L@ 0 Amps D.C. (H) 25% DCR Max. (Ohms) Irms (A) Max. 0% L Drop (DC Amps) 10% L Drop (DC Amps) 20% L Drop (DC Amps) 30% L Drop (DC Amps) 40% L Drop (DC Amps) 50% L Drop (DC Amps) Lead Dia. in. (mm) RL-1386-4-1.2 1.2 0.003 14.0 11.70 33.30 50.40 69.30 90.90 119.70 0.062 (1.60) RL-1386-4-2.2 2.2 0.004 14.0 9.00 25.20 37.80 52.20 68.40 90.00 0.062 (1.60) RL-1386-4-3.3 3.3 0.005 14.0 7.20 19.80 29.70 41.40 54.00 72.00 0.062 (1.60) RL-1386-4-4.7 4.7 0.005 14.0 5.90 16.20 25.20 34.20 45.00 59.40 0.062 (1.60) RL-1386-4-6.8 6.8 0.006 14.0 5.10 14.40 21.60 29.70 38.70 51.30 0.062 (1.60) RL-1386-4-8.2 8.2 0.007 14.0 4.50 12.60 18.90 26.10 34.20 45.00 0.062 (1.60) RL-1386-4-10 10.0 0.008 14.0 3.80 10.80 16.20 22.50 29.70 39.60 0.062 (1.60) RL-1386-4-12 12.0 0.008 14.0 3.60 9.90 14.40 20.70 27.00 36.00 0.062 (1.60) RL-1386-4-15 15.0 0.009 14.0 3.20 9.00 13.50 18.90 24.30 32.40 0.062 (1.60) RL-1386-4-18 18.0 0.010 14.0 3.00 8.40 12.60 17.20 22.50 29.70 0.062 (1.60) RL-1386-4-22 22.0 0.010 14.0 2.80 7.70 11.70 15.30 20.70 27.00 0.062 (1.60) RL-1386-4-27 27.0 0.011 14.0 2.30 6.80 9.90 13.50 18.00 23.40 0.062 (1.60) RL-1386-4-33 33.0 0.011 14.0 2.10 5.90 8.80 11.70 15.30 20.70 0.062 (1.60) RL-1386-4-39 39.0 0.012 14.0 1.90 5.20 7.90 10.80 14.40 18.90 0.062 (1.60) RL-1386-4-47 47.0 0.013 14.0 1.70 4.80 7.20 9.90 12.60 17.10 0.062 (1.60) RL-1386-4-56 56.0 0.013 14.0 1.50 4.30 6.60 9.00 11.70 15.30 0.062 (1.60) RL-1386-4-68 68.0 0.014 14.0 1.40 4.10 6.00 8.30 10.80 14.40 0.062 (1.60) RL-1386-4-82 82.0 0.014 14.0 1.30 3.60 5.40 7.40 9.00 12.60 0.062 (1.60) RL-1386-4-100 100.0 0.016 14.0 1.20 3.20 4.90 6.70 8.80 10.80 0.062 (1.60) RL-1386-4-120 120.0 0.017 14.0 1.10 2.90 4.40 6.10 8.00 9.90 0.062 (1.60) RL-1386-4-150 150.0 0.018 14.0 0.90 2.60 4.00 5.50 7.20 9.00 0.062 (1.60) RL-1386-4-180 180.0 0.022 14.0 0.86 2.30 3.60 5.00 6.50 8.60 0.062 (1.60) RL-1386-4-220 220.0 0.024 14.0 0.78 2.20 3.20 4.50 5.90 7.70 0.062 (1.60) RL-1386-4-270 270.0 0.026 14.0 0.71 1.90 2.90 4.10 5.30 7.00 0.062 (1.60) RL-1386-4-330 330.0 0.029 14.0 0.63 1.70 2.60 3.60 4.80 6.30 0.062 (1.60) RL-1386-4-390 390.0 0.034 14.0 0.58 1.60 2.40 3.30 4.40 5.80 0.062 (1.60) RL-1386-4-470 470.0 0.036 14.0 0.54 1.40 2.30 3.10 4.10 5.30 0.062 (1.60) RL-1386-4-560 560.0 0.042 14.0 0.49 1.40 2.10 2.80 3.70 4.90 0.062 (1.60) RL-1386-4-680 680.0 0.056 9.0 0.44 1.20 1.80 2.50 3.30 4.30 0.051 (1.30) RL-1386-4-820 820.0 0.064 9.0 0.40 1.10 1.60 2.30 3.00 4.00 0.051 (1.30) RL-1386-4-1000 1000.0 0.090 9.0 0.36 1.00 1.50 2.10 2.70 3.60 0.051 (1.30) RL-1386-4 TABLE CONTINUES ON FOLLOWING PAGE TOROIDS NOTES: 1. INDUCTANCE MEASURED AT 1 kHz, 0.1 Vrms 2. ELECTRICAL SPECIFICATIONS MEASURED AT 25C 3. SATURATION CURRENTS SHOWN ARE FOR MAXIMUM L DROP INDICATED, I.E., IF 20% DROP FOR A 100H CHOKE IS AT 2 AMPS, THE L WILL BE APPROX. 80H (60H MIN.) 4. LEADS FOR PC MOUNTING TINNED TO WITHIN 1/16" OF BODY 5. ENCAPSULATION AVAILABLE 6. NONSTANDARD VALUES AVAILABLE ON REQUEST 7. HORIZONTAL MOUNTED UNITS ALSO AVAILABLE 8. ADDITIONAL MOUNTING IS RECOMMENDED ON LARGER UNITS AND UNITS WOUND WITH FINER WIRE 9. DRIVE LEVEL AT WHICH YOU TEST IS IMPORTANT 10. Irms - CURRENT THAT CAUSES THE TEMPERATURE TO RISE APPROX. 40C ABOVE AMBIENT OF 25C RENCO ELECTRONICS INC. 400 595 International Place, Rockledge, FL 32955-4200 USA * www.rencousa.com * ISO 9001 Certified Toll Free Engineering Hot Line: 800.645.5828 * P: 321.637.1000 * F: 321.637.1600 RL-1386-4, RL-1386-5 Renco Part No. RL-1386-4 L@ 0 Amps DCR D.C. (H) Max. 25% (Ohms) Irms (A) Max. 0% L Drop (DC Amps) 10% L Drop (DC Amps) 20% L Drop (DC Amps) 30% L Drop (DC Amps) 40% L Drop (DC Amps) 50% L Drop (DC Amps) Lead Dia. in. (mm) RL-1386-4-1200 1200.0 0.115 7.0 0.33 0.90 1.40 1.90 2.50 3.30 0.047 (1.20) RL-1386-4-1500 1500.0 0.123 7.0 0.29 0.81 1.20 1.60 2.20 2.70 0.047 (1.20) RL-1386-4-1800 1800.0 0.149 7.0 0.26 0.75 1.10 1.50 2.00 2.60 0.047 (1.20) RL-1386-4-2200 2200.0 0.164 7.0 0.24 0.68 0.99 1.40 1.80 2.30 0.047 (1.20) RL-1386-4-2700 2700.0 0.229 5.0 0.22 0.61 0.90 1.30 1.60 2.20 0.039 (1.00) RL-1386-4-3300 3300.0 0.252 5.0 0.20 0.56 0.84 1.10 1.40 2.00 0.039 (1.00) RL-1386-4-3900 3900.0 0.318 4.5 0.18 0.51 0.76 0.99 1.40 1.80 0.035 (0.90) RL-1386-4-4700 4700.0 0.336 4.5 0.16 0.46 0.68 0.90 1.20 1.60 0.035 (0.90) RL-1386-4-5600 5600.0 0.400 4.5 0.15 0.42 0.63 0.87 1.10 1.40 0.035 (0.90) Renco Part No. RL-1386-5 L@ 0 Amps D.C. (H) 25% DCR Max. (Ohms) Irms (A) Max. 0% L Drop (DC Amps) 10% L Drop (DC Amps) 20% L Drop (DC Amps) 30% L Drop (DC Amps) 40% L Drop (DC Amps) 50% L Drop (DC Amps) Lead Dia. in. (mm) RL-1386-5-1.0 1.0 0.003 22.0 19.90 55.80 83.70 115.20 151.20 199.40 0.078 (2.00) RL-1386-5-2.2 2.2 0.003 22.0 13.20 37.20 55.80 77.00 100.80 132.80 0.078 (2.00) RL-1386-5-3.9 3.9 0.004 22.0 9.90 27.90 41.40 57.80 75.60 99.60 0.078 (2.00) RL-1386-5-5.6 5.6 0.004 22.0 7.90 22.30 33.30 46.30 60.30 79.70 0.078 (2.00) RL-1386-5-10 10.0 0.005 22.0 6.60 18.50 27.90 38.50 50.40 66.40 0.078 (2.00) RL-1386-5-12 12.0 0.005 22.0 5.70 15.90 23.40 33.00 43.20 56.90 0.078 (2.00) RL-1386-5-15 15.0 0.006 22.0 5.00 14.00 20.70 28.90 37.80 49.80 0.078 (2.00) RL-1386-5-18 18.0 0.007 22.0 4.40 12.30 18.30 25.70 33.30 44.30 0.078 (2.00) RL-1386-5-22 22.0 0.007 22.0 4.00 11.20 16.20 23.10 29.70 39.90 0.078 (2.00) RL-1386-5-27 27.0 0.008 22.0 3.20 9.30 13.50 19.30 25.20 33.20 0.078 (2.00) RL-1386-5-33 33.0 0.009 22.0 3.10 8.60 12.60 17.70 22.50 30.60 0.078 (2.00) RL-1386-5-39 39.0 0.009 22.0 2.80 7.90 11.70 16.50 21.60 28.40 0.078 (2.00) RL-1386-5-47 47.0 0.010 22.0 2.40 6.90 9.90 14.40 18.90 24.80 0.078 (2.00) RL-1386-5-56 56.0 0.010 22.0 2.30 6.50 9.00 13.60 17.10 23.40 0.078 (2.00) RL-1386-5-68 68.0 0.011 22.0 2.10 5.90 8.10 12.20 15.30 21.00 0.078 (2.00) RL-1386-5 TABLE CONTINUES ON FOLLOWING PAGE 6. NONSTANDARD VALUES AVAILABLE ON REQUEST 7. HORIZONTAL MOUNTED UNITS ALSO AVAILABLE 8. ADDITIONAL MOUNTING IS RECOMMENDED ON LARGER UNITS AND UNITS WOUND WITH FINER WIRE 9. DRIVE LEVEL AT WHICH YOU TEST IS IMPORTANT 10. Irms - CURRENT THAT CAUSES THE TEMPERATURE TO RISE APPROX. 40C ABOVE AMBIENT OF 25C RENCO ELECTRONICS INC. 595 International Place, Rockledge, FL 32955-4200 USA * www.rencousa.com * ISO 9001 Certified Toll Free Engineering Hot Line: 800.645.5828 * P: 321.637.1000 * F: 321.637.1600 401 TOROIDS NOTES: 1. INDUCTANCE MEASURED AT 1 kHz, 0.1 Vrms 2. ELECTRICAL SPECIFICATIONS MEASURED AT 25C 3. SATURATION CURRENTS SHOWN ARE FOR MAXIMUM L DROP INDICATED, I.E., IF 20% DROP FOR A 100H CHOKE IS AT 2 AMPS, THE L WILL BE APPROX. 80H (60H MIN.) 4. LEADS FOR PC MOUNTING TINNED TO WITHIN 1/16" OF BODY 5. ENCAPSULATION AVAILABLE RL-1386-5 Renco Part No. RL-1386-5 L@ 0 Amps D.C. (H) 25% DCR Max. (Ohms) Irms (A) Max. 0% L 10% L Drop Drop (DC (DC Amps) Amps) 20% L Drop (DC Amps) 30% L Drop (DC Amps) 40% L Drop (DC Amps) 50% L Drop (DC Amps) Lead Dia. in. (mm) RL-1386-5-82 82.0 0.011 22.0 11.90 5.30 7.20 11.00 14.40 18.90 0.070 (1.80) RL-1386-5-100 100.0 0.012 22.0 1.60 4.60 6.30 9.60 12.60 16.60 0.070 (1.80) RL-1386-5-120 120.0 0.012 22.0 1.50 4.20 6.30 8.80 10.80 15.30 0.070 (1.80) RL-1386-5-150 150.0 0.013 22.0 1.40 4.00 5.40 8.20 10.80 14.20 0.070 (1.80) RL-1386-5-180 RL-1386-5-220 180.0 0.014 22.0 1.30 3.60 5.40 7.40 9.00 12.80 0.070 (1.80) 220.0 0.016 22.0 1.20 3.20 4.50 6.80 8.10 11.70 0.070 (1.80) RL-1386-5-270 270.0 0.017 22.0 1.00 2.80 3.60 5.90 7.20 10.20 0.070 (1.80) RL-1386-5-330 330.0 0.019 22.0 0.90 2.60 3.60 5.50 7.20 9.50 0.070 (1.80) RL-1386-5-390 390.0 0.023 22.0 0.81 2.30 3.60 5.00 6.30 8.60 0.070 (1.80) RL-1386-5-470 470.0 0.039 18.0 0.80 2.20 3.30 4.60 6.00 7.70 0.070 (1.80) RL-1386-5-560 560.0 0.045 18.0 0.69 1.90 2.90 4.00 5.10 6.80 0.070 (1.80) RL-1386-5-680 680.0 0.055 11.0 0.63 1.80 2.70 3.60 4.80 6.10 0.059 (1.50) RL-1386-5-820 820.0 0.065 11.0 0.58 1.60 2.40 3.30 4.30 5.80 0.059 (1.50) RL-1386-5-1000 1000.0 0.070 11.0 0.51 1.40 2.10 2.90 3.90 5.00 0.059 (1.50) RL-1386-5-1200 1200.0 0.091 7.0 0.47 1.30 1.90 2.70 3.50 4.70 0.047 (1.20) RL-1386-5-1500 1500.0 0.103 7.0 0.42 1.20 1.70 2.40 3.20 4.20 0.047 (1.20) RL-1386-5-1800 1800.0 0.113 7.0 0.39 1.10 1.60 2.20 2.90 3.90 0.047 (1.20) RL-1386-5-2200 2200.0 0.130 7.0 0.34 1.00 1.40 2.00 2.50 3.40 0.047 (1.20) RL-1386-5-2700 2700.0 0.145 7.0 0.31 0.87 1.30 1.80 2.30 3.10 0.047 (1.20) RL-1386-5-3300 3300.0 0.215 5.0 0.28 0.79 1.20 1.60 2.20 2.80 0.039 (1.00) RL-1386-5-3900 3900.0 0.235 5.0 0.26 0.79 1.10 1.40 1.90 2.50 0.039 (1.00) RL-1386-5-4700 4700.0 0.260 5.0 0.23 0.65 1.00 1.40 1.70 2.30 0.039 (1.00) RL-1386-5-5600 5600.0 0.315 5.0 0.21 0.59 0.90 1.20 1.60 2.10 0.039 (1.00) TOROIDS NOTES: 1. INDUCTANCE MEASURED AT 1 kHz, 0.1 Vrms 2. ELECTRICAL SPECIFICATIONS MEASURED AT 25C 3. SATURATION CURRENTS SHOWN ARE FOR MAXIMUM L DROP INDICATED, I.E., IF 20% DROP FOR A 100H CHOKE IS AT 2 AMPS, THE L WILL BE APPROX. 80H (60H MIN.) 4. LEADS FOR PC MOUNTING TINNED TO WITHIN 1/16" OF BODY 5. ENCAPSULATION AVAILABLE 6. NONSTANDARD VALUES AVAILABLE ON REQUEST 7. HORIZONTAL MOUNTED UNITS ALSO AVAILABLE 8. ADDITIONAL MOUNTING IS RECOMMENDED ON LARGER UNITS AND UNITS WOUND WITH FINER WIRE 9. DRIVE LEVEL AT WHICH YOU TEST IS IMPORTANT 10. Irms - CURRENT THAT CAUSES THE TEMPERATURE TO RISE APPROX. 40C ABOVE AMBIENT OF 25C RENCO ELECTRONICS INC. 402 595 International Place, Rockledge, FL 32955-4200 USA * www.rencousa.com * ISO 9001 Certified Toll Free Engineering Hot Line: 800.645.5828 * P: 321.637.1000 * F: 321.637.1600