Conductive Polymer Hybrid Aluminum Electrolytic Capacitor/ZC Surface Mount Type Series: ZC Type: V High temperature Lead-Free reflow Features Endurance: 4000 h at 125 C (The longest endurance in the industry by each case size) Low ESR and High ripple current (85% over, Lower ESR than Current V-TP) High-withstand voltage (25 V to 63 V),Low LC(0.01 CV or 3 A) Equivalent to conductive polymer type Aluminum Electrolytic Capacitor (There are little characteristics change by temperature and frequency) RoHS directive compliant Specifications Category Temp. Range Rated W.V.Range Nominal Cap.Range Capacitance Tolerance -55 C to +125 C 25 V.DC to 63 V.DC 10 F to 330 F 20 % (120 Hz/+20 C) I < 0.01 CV or 3 (A) After 2 minutes (whichever is greater) DC Leakage Current tan Please see the attached Standard Products list The capacitor shall be subjected to application of the D.C. voltage with full rated ripple current at +125 C for 4000 hours. After stabilizing at room temperature(+15 to 35 C), the capacitor shall not exceed the specified limits. (The sum of DC voltage and ripple peak voltage shall not exceed the rated voltage.) Capacitance change 30 % of initial measured value tan < 200 % of initial specified value E. S. R. < 200 % of initial specified value DC leakage current < initial specified value Size Code ESR after Endurance C D D8 F G (/100 kHz) (-40 C) 2.0 1.4 0.8 0.4 0.3 Endurance Shelf Life After storage for 1000 hours at +125 C2 C with no voltage applied and then being stabilized at +20 C, capacitors shall meet the limits specified in Endurance. (With voltage treatment) Resistance to Soldering Heat After reflow soldering and then being stabilized at +20 C, capacitors shall meet the following limits. Capacitance change 10 % of initial measured value tan < initial specified value DC leakage current < initial specified value Frequency correction factor for ripple current Frequency (Hz) 120 0.10 Correction factor 10 k 0.60 100 k to 1.00 Dimensions in mm (not to scale) A0.2 - B0.2 Series identification H D0.5 Capacitance (F) 33 E ZC + L W ( ) Reference size Rated Voltage Mark Lot number Rated Voltage Mark E V H J 25 V 35 V 50 V 63 V K 0.3 max. (I) Marking color : BLACK Negative polarity marking (-) (P) Example:25 V 33 F (Unit : mm) (I) Marking 1k 0.30 Size code D L A, B C 5.0 5.80.3 5.3 D 6.3 5.80.3 6.6 D8 6.3 7.70.3 6.6 F 8.0 10.20.3 8.3 G 10.0 10.20.3 10.3 H I W P K 6.5 max. 7.8 max. 7.8 max. 10.0 max. 12.0 max. 2.2 2.6 2.6 3.4 3.5 0.650.1 0.650.1 0.650.1 0.900.2 0.900.2 1.5 1.8 1.8 3.1 4.6 0.15 0.35 +- 0.20 + 0.15 0.35 - 0.20 0.15 0.35 +- 0.20 0.700.2 0.700.2 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. - EEE-4 - 00 Nov. 2012 Conductive Polymer Hybrid Aluminum Electrolytic Capacitor/ZC Standard Products Endurance : 125 C 4000 h Case size W.V. (V) 25 35 50 63 E.S.R. tan (100 kHz) (+20 C) (m) 80 (120 Hz) (+20 C) 0.14 EEHZC1E330R (5) (pcs) 1000 0.14 EEHZC1E560P (5) 1000 Dia. Length (F) 33 (mm) 5 (mm) 5.8 C Ripple Current (100 kHz) (+125 C) (mA r.m.s.) 550 56 6.3 5.8 D 900 50 Cap. (20 %) Min. Packaging Q'ty Specification Size Code Part No. Reflow (RoHS:compliant) Taping 100 6.3 7.7 D8 1400 30 0.14 EEHZC1E101XP (5) 900 220 8 10.2 F 1600 27 0.14 EEHZC1E221P (6) 500 330 10 10.2 G 2000 20 0.14 EEHZC1E331P (6) 500 22 5 5.8 C 550 100 0.12 EEHZC1V220R (5) 1000 47 6.3 5.8 D 900 60 0.12 EEHZC1V470P (5) 1000 68 6.3 7.7 D8 1400 35 0.12 EEHZC1V680XP (5) 900 150 8 10.2 F 1600 27 0.12 EEHZC1V151P (6) 500 270 10 10.2 G 2000 20 0.12 EEHZC1V271P (6) 500 10 5 5.8 C 500 120 0.10 EEHZC1H100R (5) 1000 22 6.3 5.8 D 750 80 0.10 EEHZC1H220P (5) 1000 33 6.3 7.7 D8 1100 40 0.10 EEHZC1H330XP (5) 900 68 8 10.2 F 1250 30 0.10 EEHZC1H680P (6) 500 100 10 10.2 G 1600 28 0.10 EEHZC1H101P (6) 500 10 6.3 5.8 D 700 120 0.08 EEHZC1J100P (5) 1000 22 6.3 7.7 D8 900 80 0.08 EEHZC1J220XP (5) 900 33 8 10.2 F 1100 40 0.08 EEHZC1J330P (6) 500 56 10 10.2 G 1400 30 0.08 EEHZC1J560P (6) 500 * Please refer to the page of "Reflow Profile" and "The Taping Dimensions". Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. - EEE-5 - 00 Nov. 2012