L1Q0-3580000001200 - Lumileds

ILLUMINATION

RoHS

COMPLIANT

LUXEON Q delivers superior performance in a high-power LED that

serves as a drop-in replacement for products that use the standard 3535

surface mount package. LUXEON Q is the rst high-power LED based

on the Lumileds FlipChip Technology chip-scale package (CSP) device

architecture. LUXEON Q takes advantage of a fully developed ecosystem

for 3535 components, including optics, to speed the time-to-market for

indoor and outdoor luminaires.

LUXEON Q

Standard ceramic 3535 footprint delivering

high ecacy at high-drive current

FEATURES AND BENEFITS PRIMARY APPLICATIONS

Industry standard 3535 package for optimization with existing designs Downlights

Lumileds FlipChip Technology for industry leading performance High Bay & Low Bay

High ecacy at high drive current enables high lumen and lm/$ at high lm/W Lamps

3-step MacAdam ellipse color denition: Freedom from Binning for color

consistency Outdoor

UL-recognized component [E352519] Spotlights

NO LONGER

ORDERABLE

• LUXEON TX

• LUXEON Z ES

For NEW designs consider

these replacement products:

Table of Contents

General Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Product Nomenclature .........................................................................2

Average Lumen Maintenance Characteristics .....................................................2

Environmental Compliance .....................................................................2

Product Selection & Optical Characteristics..........................................................3

Electrical Characteristics ...........................................................................4

Absolute Maximum Ratings.....................................................................4

JEDEC Moisture Sensitivity .....................................................................5

Reow Soldering Characteristics....................................................................5

Mechanical Dimensions ...........................................................................6

Solder Pad Design .............................................................................7

Relative Spectral Distribution vs. Wavelength Characteristics..........................................8

Typical Light Output Characteristics.................................................................9

Typical Forward Current Characteristics ............................................................10

Typical Radiation Patterns ........................................................................ 11

Emitter Pocket Tape Packaging....................................................................12

Emitter Reel Packaging ...........................................................................13

Product Binning and Labeling .....................................................................14

Luminous Flux and Forward Voltage Bins ..........................................................15

LUXEON Q 3-step and 5-step MacAdam ellipse Color Denition .....................................16

NO LONGER

ORDERABLE

General Information

Product Nomenclature

LUXEON Q emitters are specied and binned “hot” under conditions comparable to those found in “real-world”

lighting products. The test conditions for LUXEON Q are 350mA DC with junction temperature at 85°C.

The part number designation is explained as follows:

L 1 Q 0 - x x y y 0 0 0 0 0 z z z 0

Where:

xx — designates nominal ANSI CCT (27 for 2700K, 30 for 3000K)

yy — designates minimum CRI performance (70 for 70CRI, 80 for 80CRI)

zzz — designates minimum ux performance at standard binning current and temperature (e.g.,

090 for 90 lumens, 110 for 110 lumens, etc). 000 designates full distribution ux performance.

Therefore, 80CRI products tested and binned at 3000K with a 110lm minimum ux at binning current and

temperature will have the part numbering scheme:

L1Q0-3080000001100

Therefore, 70CRI products tested and binned at 5700K with a 130lm minimum ux at binning current and

temperature will have the following part numbering scheme:

L1Q0-5770000001300

Average Lumen Maintenance Characteristics

LUXEON Q products are tested in compliance with LM-80. Please contact your local Lumileds Technical Solutions

Manager for TM-21 extrapolations or other support.

Environmental Compliance

Lumileds is committed to providing environmentally friendly products to the solid-state lighting market. LUXEON Q

is compliant to the European Union directives on the restriction of hazardous substances in electronic equipment,

namely the RoHS and REACH directives. Lumileds will not intentionally add the following restricted material to the

LUXEON Q: lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls (PBB) or polybrominated

diphenyl ethers (PBDE).

NO LONGER

ORDERABLE

Product Selection & Optical Characteristics

Product Selection Guide for LUXEON Q Emitters

Junction Temperature = 85°C

Table 1.

Typical Performance Characteristics at 350mA, 700mA, and 1000mA for LUXEON Q, Junction Temperature = 85°C

Part Number Nominal

ANSI CCT CRI

Luminous Flux

(Lm) Min

Typical Luminous Flux

(Lm)

Typical Forward

Voltage (Vf)

Typical Ecacy

(Lm/W)

350mA 350

700

1000

350

700

1000

350

700

1000

L1Q0-278000000zzz0 2700K 80 80 113 199 261 2.81 2.93 2.99 115 97 87

L1Q0-308000000zzz0 3000K 80 90 115 204 270 2.81 2.93 2.99 117 99 88

L1Q0-358000000zzz0 3500K 80 90 117 209 278 2.81 2.93 2.99 119 102 92

L1Q0-407000000zzz0 4000K 70 110 132 236 313 2.81 2.93 2.99 134 115 104

L1Q0-507000000zzz0 5000K 70 110 133 237 315 2.81 2.93 2.99 135 116 105

L1Q0-577000000zzz0 5700K 70 110 134 241 320 2.81 2.93 2.99 136 118 106

Notes for Table 1:

1. Lumileds maintains a tolerance of ± 6.5% on luminous ux and ± 2 on CRI measurements.

Optical Characteristics

LUXEON Q at Test Current [1], Junction Temperature = 85°C

Table 2.

Nominal

ANSI CCT

Part

Number

Typical

Color Temperature

CCT

Typical Total Included

Angle [2]

(degrees)

θ0.90V

Typical Viewing Angle [3]

(degrees)

2θ 1/2

2700K L1Q0-278000000zzz0 2725K 160 135

3000K L1Q0-308000000zzz0 3045K 160 135

3500K L1Q0-358000000zzz0 3465K 160 135

4000K L1Q0-407000000zzz0 3985K 160 135

5000K L1Q0-507500000zzz0 5028K 160 135

5700K L1Q0-577000000zzz0 5665K 160 135

Notes for Table 2:

1. Test current is 350mA D.C. for all L1Q0-xxyy00000zzz0 emitters.

2. Total angle at which 90% of total luminous ux is captured.

3. Viewing angle is the o axis angle from lamp centerline where the luminous intensity is 1/2 of the peak value.

NO LONGER

ORDERABLE

Electrical Characteristics

Electrical Characteristics at test current for LUXEON Q

Junction Temperature = 85°C

Table 3.

Nominal

ANSI CCT

Forward Voltage Vf (V) [1] Typical Temperature

Coecient

of Forward Voltage [2]

(mV/°C)

DVF / DTJ

Typical Thermal Resistance

Junction to Thermal Pad

(°C/W)

Rθ J-C

Minimum Maximum

2700K 2.50 3.25 -1.6 7

3000K 2.50 3.25 -1.6 7

3500K 2.50 3.25 -1.6 7

4000K 2.50 3.25 -1.6 7

5000K 2.50 3.25 -1.6 7

5700K 2.50 3.25 -1.6 7

Notes for Table 3:

1. Lumileds maintains a tolerance of ± 0.06V on forward voltage measurements.

2. Measured between TJ = 25°C and TJ = 110°C at If = 350mA.

Absolute Maximum Ratings

Table 4.

Parameter LUXEON Q

DC Forward Current (mA) [1] [2] 1050

Peak Pulsed Forward Current (mA) [1] [3] 1200

ESD Sensitivity < 8000V Human Body Model (HBM) Class 3A JESD22-A114-E

LED Junction Temperature [1] 135°C

Operating Case Temperature at 700mA -40°C - 135°C

Storage Temperature -40°C - 135°C

Soldering Temperature JEDEC 020c 260°C

Allowable Reow Cycles 3

Reverse Voltage (Vr) [4] [5] LUXEON Q LEDs are not designed to be driven in reverse bias

Notes for Table 4:

1. Proper current derating must be observed to maintain junction temperature below the maximum. For additional information on thermal measurement guidelines please refer to Application

Brief AB118 (not available yet).

2. Residual periodic variations due to power conversion from alternating current (AC) to direct current (DC), also called “ripple”, with frequencies

≥ 100 Hz and amplitude ≤ 150mA are acceptable, assuming the average current throughout each cycle does not exceed 1050mA.

3. Pulsed operation with a peak drive current of 1200mA is acceptable if the pulse on-time is ≤ 5 ms per cycle and the duty cycle is ≤ 50%.

4. Transient reverse voltages and surge currents due to electrical switching or supply interruptions are acceptable if these events do not last for more than 10ms, the amplitude of the reverse

voltage does not exceed 5V and the reverse current is less than 200μA.

5. Max 5V reverse for up to 10s is an acceptable beginning of life, one time test condition.

NO LONGER

ORDERABLE

JEDEC Moisture Sensitivity

Table 5.

Level Floor Life Soak Requirements

Standard

Time Conditions Time Conditions

1 unlimited 30°C /

85% RH

168h

+ 5 / - 0

85°C / 85%

Reow Soldering Characteristics

Table 6.

Prole Feature Lead Free Assembly

Average Ramp-Up Rate ( Tsmax to Tp ) 3°C / second max

Preheat Temperature Min ( Tsmin ) 150°C

Preheat Temperature Max ( Tsmax ) 200°C

Preheat Time ( tsmin to tsmax ) 60 - 180 seconds

Time Maintained Above Temperature TL217°C

Time Maintained Above Time ( tL ) 60 - 150 seconds

Peak / Classication Temperature ( TP ) 260°C

Time Within 5°C of Actual Peak Temperature ( tP ) 20 - 40 seconds

Ramp-Down Rate 6°C / second max

Time 25°C to Peak Temperature 8 minutes max

Figure 1. Temperature Prole for Table 6.

NO LONGER

ORDERABLE

Mechanical Dimensions

Notes for Figure 2:

1. Drawings not to scale.

2. All dimensions are in millimeters.

3. The thermal pad is electrically isolated from the anode and cathode contact pads.

4. Do not handle the device by the lens. Excessive force on the lens may damage the lens itself or the interior of the device.

5. Tolerances (UNLESS OTHERWISE SPECIFIED)

- LINEAR: ANGULAR:

- XX. ± 0.125 mm XX ± 1°

Figure 2. Package outline drawing for LUXEON Q.

NO LONGER

ORDERABLE

Solder Pad Design

Notes for Figure 3:

• The photograph shows the recommended LUXEON Q layout on Printed Circuit Board (PCB).

• For more information on assembly and layout, please refer to Application Brief 118 (AB118).

• The .dwg les are available at www.lumileds.com.

Figure 3. Solder pad layout.

NO LONGER

ORDERABLE

Relative Spectral Distribution vs. Wavelength Characteristics

Relative Spectra at Test Current, Junction Temperature = 85°C

Figure 4. Color Spectrum of L1Q0-xx8000000zzz0.

Figure 5. Color Spectrum of L1Q0-xx7000000zzz0.

NO LONGER

ORDERABLE

Typical Light Output Characteristics

Relative Light Output vs. Junction Temperature, Test Current = 350mA

Relative Light Output vs. Forward Current, Junction Temperature = 85°C

Figure 6. Relative light output vs. junction temperature, L1Q0-xxyy00000zzz0.

Figure 7. Typical relative luminous ux vs. forward current, L1Q0-xxyy00000zzz0.

NO LONGER

ORDERABLE

Typical Forward Current Characteristics

Forward Current vs. Forward Voltage

Junction Temperature = 85°C

Figure 8. Typical forward current vs. forward voltage, L1Q0-xxyy00000zzz0.

NO LONGER

ORDERABLE

Typical Radiation Patterns

Typical Spatial Radiation Pattern

Typical Polar Radiation Pattern

Figure 9. Typical representative spatial radiation pattern for L1Q0-xxyy00000zzz0.

Figure 10. Typical representative polar radiation pattern for L1Q0-xxyy00000zzz0.

NO LONGER

ORDERABLE

Emitter Pocket Tape Packaging

Figure 11. Emitter pocket tape packaging.

NO LONGER

ORDERABLE

Emitter Reel Packaging

Figure 12. Emitter reel packaging.

NO LONGER

ORDERABLE

Product Binning and Labeling

Purpose of Product Binning

In the manufacturing of semiconductor products, there are variations in performance around the average values

given in the technical data sheets. For this reason, Lumileds bins the LED components for luminous ux and forward

voltage (Vf ). Color is oered in a single 3-step or 5-step MacAdam ellipse color space centered on the ANSI CCT

color bins. For additional information please review the MacAdam ellipse technical denition section.

Decoding Product Bin Labeling

LUXEON Q emitters are labeled using a four digit alphanumeric code (CAT code) depicting the bin values for emitters

packaged on a single reel. All emitters packaged within a reel are of the same 3-variable bin combination.

Reels of LUXEON Q emitters are labeled with a four digit alphanumeric CAT code following the format below:

ABCD

A = Flux/Radiometric power bin (D, E, etc.)

B, C = Color bin (30, 3U, 3L, 5A, 5B, 5C, 5D etc.)

D = VF bin (Q, R, S)

NO LONGER

ORDERABLE

Luminous Flux and Forward Voltage Bins

Table 7 lists the standard photometric luminous ux bins for LUXEON Q emitters (tested and binned at 350mA and

Tj = 85°C). Although several bins are outlined, product availability in a particular bin varies by production run and by

product performance. Not all bins are available in all colors.

Table 7. Flux Bins

Bin Code Minimum Photometric Flux

(Lm)

Maximum Photometric Flux

(Lm)

8 80 90

990 100

A 100 110

B 110 120

C120 130

D 130 140

E 140 150

F 150 160

G160 170

Table 8 lists minimum and maximum Vf bin values per emitter. Although several bins are outlined, product availability

in a particular bin varies by production run and by product performance.

Table 8. Vf Bins

Bin Code Minimum Forward Voltage

(V)

Maximum Forward Voltage

(V)

Q 2.50 2.75

R 2.75 3.00

S 3.00 3.25

NO LONGER

ORDERABLE

LUXEON Q 3-step and 5-step MacAdam ellipse Color

Denition

Table 9. LUXEON Q Product Characteristics for 3-step MacAdam ellipse

Part

Number

Nominal

ANSI CCT Color Space Center Point

(cx, cy)

Major Axis,

Minor Axis,

Ellipse

Rotation

Angle

L1Q0-278000000zzz0 2700K Single 3-step MacAdam ellipse (0.4578, 0.4101) 0.00810 0.00420 53.7

L1Q0-308000000zzz0 3000K Single 3-step MacAdam ellipse (0.4338, 0.4030) 0.00834 0.00408 53.2

L1Q0-358000000zzz0 3500K Single 3-step MacAdam ellipse (0.4073, 0.3917) 0.00927 0.00414 54.0

L1Q0-407000000zzz0 4000K Single 3-step MacAdam ellipse (0.3818, 0.3797) 0.00939 0.00402 53.7

L1Q0-507000000zzz0 5000K Single 3-step MacAdam ellipse (0.3447, 0.3553) 0.00822 0.00354 59.6

L1Q0-577000000zzz0 5700K Single 3-step MacAdam ellipse (0.3287, 0.3417) 0.00745 0.00319 59.1

Min 80CRI 3-step color bins available above (3U) and below (3L) the blackbody line. Min 70CRI 3-step is not divided into bins above and below the blackbody line and is dened as bin 30.

Table 10. LUXEON Q Product Characteristics for 5-step MacAdam ellipse

Part

Number

Nominal

ANSI CCT Color Space Center Point

(cx, cy)

Major Axis,

Minor Axis,

Ellipse

Rotation

Angle

L1Q0-278000000zzz0 2700K Single 5-step MacAdam ellipse (0.4578, 0.4101) 0.01350 0.00700 53.7

L1Q0-308000000zzz0 3000K Single 5-step MacAdam ellipse (0.4338, 0.4030) 0.01390 0.00680 53.2

L1Q0-358000000zzz0 3500K Single 5-step MacAdam ellipse (0.4073, 0.3917) 0.01545 0.00690 54.0

L1Q0-407000000zzz0 4000K Single 5-step MacAdam ellipse (0.3818, 0.3797) 0.01565 0.00670 53.7

L1Q0-507000000zzz0 5000K Single 5-step MacAdam ellipse (0.3447, 0.3553) 0.01370 0.00590 59.6

L1Q0-577000000zzz0 5700K Single 5-step MacAdam ellipse (0.3287, 0.3417) 0.01234 0.00533 59.1

Min 70 and min 80CRI 5-step is divided into quadrants (5A, 5B, 5C, and 5D).

Notes for Tables 9 & 10:

1. Lumileds maintains a tester tolerance of ± 0.005 on x, y color coordinates.

0.380

0.390

0.400

0.410

0.420

0.430

ANSI C78.377-2008

3-step MacAdam ellipse

5-step MacAdam ellipse

BBL

"Quadrant" lines

5B 5C

Note: Color bin space

illustration for 2700K,

3000K, and 3500K. For CCTs

4000K and above the ellipse

centers are all above the

blackbody line.

Color Space Definition for above and below blackbody

Parameter Denition of MacAdam ellipseColor Space Denition for Above and Below Blackbody

NO LONGER

ORDERABLE

DS118 LUXEON Q

Product Datasheet 20180327

LUXEON is a registered trademark of the Lumileds

Holding B.V. in the United States and other countries.

lumileds.com

Neither Lumileds Holding B.V. nor its aliates shall be liable for any kind of loss of data or any other damages,

direct, indirect or consequential, resulting from the use of the provided information and data. Although Lumileds

Holding B.V. and/or its aliates have attempted to provide the most accurate information and data, the materials

and services information and data are provided “as is,” and neither Lumileds Holding B.V. nor its aliates warrants

or guarantees the contents and correctness of the provided information and data. Lumileds Holding B.V. and its

aliates reserve the right to make changes without notice. You as user agree to this disclaimer and user agree-

ment with the download or use of the provided materials, information and data. A listing of Lumileds product/

patent coverage may be accessed at lumileds.com/patents.

About Lumileds

Companies developing automotive, mobile, IoT and illumination lighting applications need a partner who can collaborate with

them to push the boundaries of light. With over 100 years of inventions and industry rsts, Lumileds is a global lighting solutions

company that helps customers around the world deliver dierentiated solutions to gain and maintain a competitive edge. As the

inventor of Xenon technology, a pioneer in halogen lighting and the leader in high performance LEDs, Lumileds builds innovation,

quality and reliability into its technology, products and every customer engagement. Together with its customers, Lumileds is

making the world safer, better and more beautiful—with light.

To learn more about our lighting solutions, visit lumileds.com.

NO LONGER

ORDERABLE

Mouser Electronics

Authorized Distributor

Click to View Pricing, Inventory, Delivery & Lifecycle Information:

Lumileds:

L1Q0-2780000000900 L1Q0-3080000001000 L1Q0-3580000001000 L1Q0-5770000001200 L1Q0-4070000001200

L1Q0-5770000001300 L1Q0-3080000001100 L1Q0-3080000001200 L1Q0-2780000001100 L1Q0-4070000001300

L1Q0-5070000001400 L1Q0-5770000001400 L1Q0-3580000001200 L1Q0-3580000001100 L1Q0-2780000001000

L1Q0-4070000001400