BAV19WS-V-GS08 - Vishay Presicion Group

BAV19WS-V, BAV20WS-V, BAV21WS-V

www.vishay.com Vishay Semiconductors

Rev. 1.5, 02-Aug-12 1Document Number: 85726

For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Small Signal Switching Diodes, High Voltage

MECHANICAL DATA

Case: SOD-323

Weight: approx. 4.3 mg

Packaging codes/options:

GS18/10K per 13" reel (8 mm tape), 10K/box

GS08/3K per 7" reel (8 mm tape), 15K/box

FEATURES

• Silicon epitaxial planar diodes

• For general purpose

• These diodes are also available in other case

styles including: the DO-35 case with the type

designation BAV19 to BAV21, the MiniMELF

case with the type designation BAV100 to

BAV103, the SOT-23 case with the type designation

BAS19 to BAS21 and the SOD-123 case with the type

designation BAV19W-V to BAV21W-V

• AEC-Q101 qualified

• Material categorization: For definitions of compliance

please see www.vishay.com/doc?99912

Note

(1) Valid provided that leads are kept at ambient temperature

Note

(1) Valid provided that leads are kept at ambient temperature

PARTS TABLE

PART TYPE

DIFFERENTIATION ORDERING CODE TYPE MARKING INTERNAL

CONSTRUCTION REMARKS

BAV19WS-V VR = 100 V BAV19WS-V-GS18 or BAV19WS-V-GS08 A8 Single diode Tape and reel

BAV20WS-V VR = 150 V BAV20WS-V-GS18 or BAV20WS-V-GS08 A9 Single diode Tape and reel

BAV21WS-V VR = 200 V BAV21WS-V-GS18 or BAV21WS-V-GS08 AA Single diode Tape and reel

ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified)

PARAMETER TEST CONDITION PART SYMBOL VALUE UNIT

Continuous reverse voltage

BAV19WS-V VR100 V

BAV20WS-V VR150 V

BAV21WS-V VR200 V

Repetitive peak reverse voltage

BAV19WS-V VRRM 120 V

BAV20WS-V VRRM 200 V

BAV21WS-V VRRM 250 V

Forward continuous current (1) IF250 mA

Rectified current (average) half wave

recitification with resistive load (1) IF(AV) 200 mA

Repetitive peak forward current (1) f 50 Hz,  = 180 °C IFRM 625 mA

Surge forward current t < 1 s, TJ = 25 °C IFSM 1A

Power dissipation (1) Ptot 200 mW

THERMAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)

PARAMETER TEST CONDITION SYMBOL VALUE UNIT

Thermal resistance junction to ambient air (1) RthJA 650 K/W

Junction temperature (1) Tj150 °C

Storage temperature range (1) Tstg - 65 to + 175 °C

BAV19WS-V, BAV20WS-V, BAV21WS-V

www.vishay.com Vishay Semiconductors

Rev. 1.5, 02-Aug-12 2Document Number: 85726

For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

TYPICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)

Fig. 1 - Forward Current vs. Forward Voltage

Fig. 2 - Admissible Forward Current vs. Ambient Temperature

Fig. 3 - Admissible Power Dissipation vs. Ambient Temperature

Fig. 4 - Dynamic Forward Resistance vs. Forward Current

ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)

PARAMETER TEST CONDITION PART SYMBOL MIN. TYP. MAX. UNIT

Forward voltage IF = 100 mA VF1V

IF = 200 mA VF1.25 V

Repetitive peak reverse voltage

VR = 100 V BAV19WS-V IR100 nA

VR = 100 V, TJ = 100 °C BAV20WS-V IR15 μA

VR = 150 V BAV21WS-V IR100 nA

VR = 150 V, TJ = 100 °C BAV19WS-V IR15 μA

VR = 200 V BAV20WS-V IR100 nA

VR = 200 V, TJ = 100 °C BAV21WS-V IR15 μA

Dynamic forward resistance IF = 10 mA rf5

Diode capacitance VR = 0, f = 1 MHz CD1.5 pF

Reverse recovery time IF = 30 mA, IR = 30 mA,

iR = 3 mA, RL = 100 trr 50 ns

18858

1000

100

0.1

0.01

I- Forward Current (mA)

0 0.4 0.6 0.8 10.2

- Forward Voltage (V)

Tj = 100 °C

25 °C

0.1

0.2

0.3

0 30 60 90 120 150

18859

amb

- Ambient Temperature (°C)

I , I - Admissible Forward Current (A)

ICurrent (rectif.) O

DC current IF

200

18864

amb

- Ambient Temperature (°C)

250

200

150

100

20 40 60 80 100 120 140 160 1800

P - Admissible Power Dissipation (W)

tot

r - Dynamic Forward Resistance

f(Ω)

100

1 10010

18861 IF- Forward Current (mA)

BAV19WS-V, BAV20WS-V, BAV21WS-V

www.vishay.com Vishay Semiconductors

Rev. 1.5, 02-Aug-12 3Document Number: 85726

For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Fig. 5 - Leakage Current vs. Junction Temperature Fig. 6 - Capacitance vs. Reverse Voltage

PACKAGE DIMENSIONS in millimeters (inches): SOD-323

0.1

18862

100

1000

0 40 80 120 160 200

IR(Tj)/IR (25 °C) - Leakage Current

Tj - Junction Temperature (°C)

Reverse Voltage

BAV19WS-V VR = 100 V

BAV20WS-V VR = 150 V

BAV21WS-V VR = 200 V

18863

1100.1

0.8

0.6

0.4

1.4

1.2

1.0

0.2

100

C - Diode Capacitance (pF)

VR- Reverse Voltage (V)

2.0

1.8

1.6

=25

°CTj

Foot print recommendation:

Rev. 5 - Date: 23.Sept.2009

17443

Document no.:S8-V-3910.02-001 (4)

0.6 (0.024)

0.6 (0.024)0.6 (0.024)

1.6 (0.063)

0.10 (0.004)

Cathode bar

0.20 (0.008)

0.40 (0.016)

2.50 (0.098)

1.1 (0.043)

1.5 (0.059)

2.85 (0.112)

1.60 (0.063)

1.95 (0.077)

0.15 (0.006)

0.1 (0.004) max.

1.15 (0.045)

0.8 (0.031)

Created - Date: 24.August.2004

0.40 (0.016)

0.25 (0.010)

0.2 (0.008)

0° to 8°

Legal Disclaimer Notice

www.vishay.com Vishay

Revision: 12-Mar-12 1Document Number: 91000

Disclaimer

ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE

RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.

Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,

“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other

disclosure relating to any product.

Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or

the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all

liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,

consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular

purpose, non-infringement and merchantability.

Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical

requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements

about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular

product with the properties described in the product specification is suitable for use in a particular application. Parameters

provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All

operating parameters, including typical parameters, must be validated for each customer application by the customer’s

technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,

including but not limited to the warranty expressed therein.

Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining

applications or for any other application in which the failure of the Vishay product could result in personal injury or death.

Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree

to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and

damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay

or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to

obtain written terms and conditions regarding products designed for such applications.

No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by

any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.

Material Category Policy

Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the

definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council

of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment

(EEE) - recast, unless otherwise specified as non-compliant.

Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that

all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.