Ordering number : ENN7074 2SK3747 N-Channel Silicon MOSFET 2SK3747 High-Voltage,High-Speed Switching Applications Preliminary Features * * * Package Dimensions Low ON resistance, low input capacitance, Ultrahigh-speed switching. High reliability (Adoption of HVP process). Micaless package facilitating mounting. unit : mm 2128 [2SK3747] 16.0 3.4 5.6 2.0 21.0 22.0 5.0 8.0 3.1 2.0 20.4 4.0 2.8 2.0 1.0 0.6 2 3 3.5 1 5.45 Specifications 1 : Gate 2 : Drain 3 : Source 5.45 SANYO : TO-3PML Absolute Maximum Ratings at Ta=25C Parameter Symbol Drain-to-Source Voltage Conditions Ratings VDSS VGSS Gate-to-Source Voltage Drain Current (DC) Unit 1500 V 20 V 2 A ID Drain Current (Pulse) IDP Allowable Power Dissipation PD PW10s, duty cycle1% 50 W Channel Temperature Tch 150 C Storage Temperature Tstg --55 to +150 C Tc=25C 4 A 3.0 W Electrical Characteristics at Ta=25C Parameter Symbol Drain-to-Source Breakdown Voltage Zero-Gate Voltage Drain Current Gate-to-Source Leakage Current Cutoff Voltage Forward Transfer Admittance Static Drain-to-Source On-State Resistance V(BR)DSS IDSS IGSS VGS(off) yfs RDS(on) Conditions ID=1mA, VGS=0 VDS=1200V, VGS=0 VGS=16V, VDS=0 VDS=10V, ID=1mA VDS=20V, ID=1A Ratings min typ max 1500 V 2.5 0.7 ID=1A, VGS=10V 100 A 10 A 3.5 1.4 10 Marking : K3747 Unit V S 13 Continued on next page. Any and all SANYO products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft's control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO representative nearest you before using any SANYO products described or contained herein in such applications. SANYO assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all SANYO products described or contained herein. SANYO Electric Co.,Ltd. Semiconductor Company TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN HD 030317QB OIKAWA No.0000-1/2 2SK3747 Continued from preceding page. Parameter Symbol Input Capacitance Ciss Output Capacitance Coss Reverse Transfer Capacitance Crss Turn-ON Delay Time Rise Time Turn-OFF Delay Time Fall Time Total Gate Charge Conditions Ratings min typ Unit max VDS=20V, f=1MHz VDS=20V, f=1MHz VDS=20V, f=1MHz 400 pF 85 pF 45 pF td(on) tr See specified Test Circuit. (14) ns See specified Test Circuit. (16) ns td(off) tf See specified Test Circuit. (160) ns See specified Test Circuit. (40) ns VDS=200V, VGS=10V, ID=2A VDS=200V, VGS=10V, ID=2A 37.5 nC 2.7 nC VDS=200V, VGS=10V, ID=2A IS=2A, VGS=0 20 Qg Gate-to-Source Charge Qgs Gate-to-Drain "Miller" Charge Qgd Diode Forward Voltage VSD 0.88 nC 1.2 V (Note) Although the protection diode is contained between gate and source, be careful of handling enough. Switching Time Test Circuit VIN VDD 200V 10V 0V PW=10s D.C.0.5% ID=1A RL=200 VIN D VOUT G 2SK3747 P.G RGS 50 S Specifications of any and all SANYO products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer's products or equipment. SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO products(including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be expor ted without obtaining the expor t license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of SANYO Electric Co., Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. This catalog provides information as of November, 2001. Specifications and information herein are subject to change without notice. No.0000-2/2