STICE CF/Stice_Connect AD/Stice_Connect AS/Stice_Connect Full-featured cost-effective emulation system for ST microcontrollers Data brief Features Emulation system - Real-time emulation of STM8 MCUs (CPU frequency from 250 Hz up to 50 MHz) - Application profiling for execution time or number of executions at instruction/source code/function level - Coverage analysis on code (at instruction/source code/function level) or data (memory locations or variables) for the entire memory space - Unlimited instruction breakpoints for the entire MCU memory space - Data breakpoints - Advanced breakpoints with up to 4 levels of user-configured conditions - Control of application memory accesses configurable at byte level - Trace of 128 K records with time stamp - Non-intrusive read/write on-the-fly to data memory during emulation - Power supply follower managing STM8 application voltages in range 1.65 to 5.5 V (0.8 V possible for MEB with specific TEB) - 8-bit probe analyzer - Input trigger and 2 output triggers - In-circuit debugging/programming via SWIM May 2011 CF/Stice_Connect AD/Stice_Connect AS/Stice_Connect - USB 2.0 (high-speed) interface to host PC Connection accessories - CF/Stice_Connect: 60- or 120-pin flexible cable to connect to the application - AD/Stice_Connect: connection adapter to adapt the connection flex to the target device package - AS/Stice_Connect: adapter socket soldered onto the application and receiving the AD/Stice_connect Table 1. Part numbers Contents STICE Emulation system CF/Stice_Connect Connection flex AD/Stice_Connect Connection adapter for target device package or SWIM connector AS/Stice_Connect Adapter socket Doc ID 13797 Rev 4 For further information contact your local STMicroelectronics sales office. Device summary 1/9 www.st.com 9 Description STICE Description The STice is the advanced in-circuit emulation system from STMicroelectronics. It offers a complete range of proven debugging features such as advanced breakpoints and trace recording. In addition, it provides new profiling and coverage capabilities to help detect and eliminate dead code and bottlenecks in application execution. In addition to emulation, the STice provides in-circuit debugging and programming capability for ST microcontrollers via the ST single wire interface module (SWIM). SWIM allows nonintrusive debugging of an application while it runs on the target microcontroller. The STice is supported by the free STM8 toolset, which includes the ST Visual Develop (STVD) integrated development environment for building, debugging and fine-tuning applications, the ST Visual Programmer (STVP) microcontroller programming interface and the STM8 Assembler. The STice offers improved cost-effectiveness by allowing users to order exactly what they need to meet their development requirements and to adapt their emulation system to support existing and future ST microcontrollers. All these connection accessories and the STice emulation boards can be ordered independently as replacement parts. 2/9 Doc ID 13797 Rev 4 STICE Working environment Working environment The STice is a modular emulation system that connects to a host PC via a USB interface, to an application board in place of the target microcontroller. It is made up of: A main emulation board (MEB) that provides interface and emulation resources common to all emulated MCU families, A target emulation board (TEB) that provides the analog emulation resources for a specific family of microcontrollers. It may also include a peripheral emulation board (PEB) that provides emulation resources specific to an emulated peripheral for a microcontroller sub-family. Figure 1. STICE and connection accessories (full emulation configuration) &REE 34 TOOLSET 346$ AND 3460 RUNNING ON YOUR 0# DRIVE 34ICE 34)#% INCLUDES ALL EMULATION RESOURCES -%" 4%" AND 0%" #&3TICE?#ONNECT #ONNECTION FLEX TO CONNECT TO APPLICATION BOARD !$3TICE?#ONNECT #ONNECTION ADAPTER TO ADAPT CONNECTION CABLE TO -#5 !33TICE?#ONNECT !DAPTER SOCKET ON APPLICATION BOARD TO PLUG IN EMULATOR IN PLACE OF -#5 For emulation, STice connects to an application board via connection accessories that you specify when ordering the STice. The STice emulation system and connection accessories are shown in Figure 1. The connection accessories for emulation are: Connection flex (CF/Stice_Connect) - flexible cable (60- or 120-pin depending on the target MCU) that relays signals from the STice to your application board. Connection adapter (AD/Stice_Connect) - adapts the connection flex either to the target microcontroller footprint or to the SWIM connector on your application board. Adapter socket (AS/Stice_Connect) - socket that solders to your application board in place of your MCU and receives the connection adapter. Sockets also allow installation of your target microcontroller. Doc ID 13797 Rev 4 3/9 Working environment STICE The free STM8 toolset provides all the software required to develop and debug applications with STice, and to program an application to a microcontroller. Software includes: Figure 2. STVD - Integrated development environment (IDE) that runs on the host PC connected to the emulator and allows users to edit, build and debug applications and then program them to the target STM8 microcontroller. STVD supports the full range of emulation and in-circuit debugging features for STice. It also offers a quick programming interface based on STVP, for programming microcontrollers without leaving STVD. STVP - Full-featured software programming interface that runs on the host PC connected to the emulator. Provides the full range of features for device programming including a project mode for saving programming configurations and automating programming sequences. In-circuit debugging/in-circuit programming configuration 2IGHT PANEL (OST 0# RUNNING 346$ FOR )#0 AND )#$ OR 3460 FOR )#0 )#0 )#$ PORT ON 34ICE RIGHT PANEL FOR )#$)#0 USING 37)!$3TICE?#ONNECT )#$)#0 ADAPTER RELAYED TO MICROCONTROLLER ALLOWS CONNECTION OF THE FLAT CABLE FROM 34ICE 9OUR MICROCONTROLLER 53" CONNECTION TO HOST 0# 4/9 Doc ID 13797 Rev 4 STICE Ordering STice Ordering STice The STice emulation system is designed in a modular fashion so that you can order just the components that you need to emulate your target microcontroller. To help you order what you need, refer to Table 2 for a description of each component and to Table 3 for the list of accessories required for your microcontroller. Make sure to use the correct order codes. Table 2. Device contents Part numbers Order codes Contents Emulation system STICE STICE-SYSxxx(1) Includes emulator case with: - MEB, TEB and PEB(2) for a microcontroller sub-family - USB cable - Power supply - Trigger cables - Analyzer input cable Connection flex CF/FP60 60-pin connection cable for connection to the application board CF/FP120 120-pin connection cable for connection to the application board CF/Stice_Connect Connection adapter AD/xxxxxx-xxx(1) AD/Stice_Connect AD-ICD/ICP A connection adapter that is specific to your microcontroller's package ICD/ICP adapter kit for STice Adapter socket AS/Stice_Connect AS/xxxxxxx(1) AS-DIP-SO A socket that is specific to your microcontroller's package 1. Refer to Table 3: Connection accessories for STice systems for the order codes required for your microcontroller. 2. Peripheral emulation board (PEB) is provided only when required to emulate a specific sub-family of microcontrollers. Doc ID 13797 Rev 4 5/9 Ordering STice Table 3. MCU STM8AFxx STM8L101 STM8L15x STM8L16x Connection accessories for STice systems Package (size, pitch in mm) Stice system Connection flex Connection adapter Adapter socket LQFP32 (7x7, 0.8) STICE-SYS001 CF/FP60 AD/QFP32B-A03 AS/QFP32BC LQFP48 (7x7, 0.5) STICE-SYS001 CF/FP60 AD/QFP48B-A03 AS/QFP48BA LQFP64 (10x10, 0.5) STICE-SYS001 CF/FP120 AD/QFP64C-B02 AS/QFP64CA LQFP80 STICE-SYS001 (14x14, 0.65) CF/FP120 AD/QFP80F-B01 AS/QFP80FB TSSOP20 (6.5x4.4, 0.65) STICE-SYS001 QFN20 (3x3, 0.5) STICE-SYS005 QFN28 (4x4, 0.5) STICE-SYS005 QFN32 (5x5, 0.5) STICE-SYS005 LQFP32 (7x7, 0.8) STICE-SYS005 CF/FP60 TSSOP20 (6.5x4.4, 0.65) STICE-SYS005 CF/FP60 QFN28 (4x4, 0.5) STICE-SYS009 QFN32 (5x5, 0.5) STICE-SYS009 QFN48 (7x7, 0.8) STICE-SYS009 LQFP32 (7x7, 0.8) STICE-SYS009 LQFP48 (7x7, 0.5) LQFP64 (10x10, 0.5) CF/FP60 -(1) In circuit debug/program adapters AD/TSSO20A-A02 AS/TSSO20AB AD/QFN20J-Z01 AS/QFN20JA AD/QFN28H-Z01 AS/QFN28HA AD/QFN32A-Z01 AS/QFN32AA AD/QFP32B-A04 AS/QFP32BC AD-ICD/ICP AD/TSSO20A-A01 AS/TSSO20AB AD/QFN28H-Z01 AS/QFN28HA AD/QFN32A-Z01 AS/QFN32AA AD/QFN48B-Z02 AS/QFN48BA CF/FP60 AD/QFP32B-A04 AS/QFP32BC STICE-SYS009 CF/FP60 AD/QFP48B-A04 AS/QFP48BA STICE-SYS009 CF/FP120 AD/QFP64C-B03 AS/QFP64CA LQFP80 STICE-SYS009 (14x14, 0.65) CF/FP120 AD/QFP80F-B02 AS/QFP80FB -(1) (2) AS/TSSO20AB TSSOP20 (6.5x4.4, 0.65) 6/9 STICE STICE-SYS009 -(1) Doc ID 13797 Rev 4 STICE Table 3. MCU Ordering STice Connection accessories for STice systems (continued) Package (size, pitch in mm) Stice system Connection flex Connection adapter Adapter socket SDIP32 (400 mils, 1.778) STICE-SYS001 CF/FP60 AD/DIP32C-A03(3) AS-DIP-SO SDIP32 (400 mils, 1.778) STICE-SYS001 CF/FP60 AD/DIP32C-A02(4) AS-DIP-SO QFN20 (3x3, 0.5) STICE-SYS001 AD/QFN20J-Z01 AS/QFN20JA QFN32 (5x5, 0.5) STICE-SYS001 QFN32 (5x5, 0.5) STICE-SYS001 LQFP32 (7x7, 0.8) STICE-SYS001 CF/FP60 LQFP32 (7x7, 0.8) STICE-SYS001 CF/FP60 LQFP44 (10x10, 0.8) STICE-SYS001 LQFP48 (7x7, 0.5) STM8Sx0x -(1) AD/QFN32A-Z03 (3) AD/QFN32A-Z02 (4) AD/QFP32B-A05 (3) AD/QFP32B-A03 AS/QFN32AA AS/QFN32AA AS/QFP32BC (4)(5) AS/QFP32BC CF/FP60 AD/QFP44C-A02 AS/QFP44CC STICE-SYS001 CF/FP60 AD/QFP48B-A03 AS/QFP48BA LQFP64 (10x10, 0.5) STICE-SYS001 CF/FP120 AD/QFP64C-B02 AS/QFP64CA LQFP64 (14x14, 0.8) STICE-SYS001 CF/FP120 AD/QFP64F-B01 AS/QFP64FC LQFP80 STICE-SYS001 (14x14, 0.65) CF/FP120 AD/QFP80F-B01 AS/QFP80FB TSSOP20 (6.5x4.4, 0.65) STICE-SYS001 CF/FP60 In circuit debug/program adapters AD-ICD/ICP AD/TSSO20A-A02 AS/TSSO20AB 1. "-": no accessories required. 2. Contact your nearest ST Sales offices. 3. STM8Sx03xx. 4. STM8S105xx. 5. STM8S207xx. Doc ID 13797 Rev 4 7/9 Revision history STICE Revision history Table 4. 8/9 Document revision history Date Revision Changes 31-Mar-2008 1 Initial release. 10-May-2010 2 Modified as CB-xx parts are now obsolete. 08-Nov-2010 3 Modified Table 1, Table 2 and Figure 1 as part numbers changed: - AS/xxxxxx became AS/Stice_Connect - AD/xxxxxx-xxx and AD-ICD/ICP became AD/Stice_Connect - CF/FPxxx became CF/Stice_Connect Order code AS-DIP-SO added to Table 2. 24-May-2011 4 Removed CB-xxx part numbers from the whole document. Added STice accessories description and ordering information. Doc ID 13797 Rev 4 STICE Please Read Carefully: Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries ("ST") reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST's terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein. UNLESS OTHERWISE SET FORTH IN ST'S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER'S OWN RISK. Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST. ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners. (c) 2011 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Philippines - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com Doc ID 13797 Rev 4 9/9