SPECIFICATION Supplier : Samsung electro-mechanics Samsung P/N : CL10B225KP8NNNC Product : Multi-layer Ceramic Capacitor Description : CAP, 2.2, 10V, 10%, X7R, 0603 A. Samsung Part Number Series CL 10 B 225 K P 8 N N N C Samsung Multi-layer Ceramic Capacitor Size 0603 (inch code) Dielectric X7R Capacitance Capacitance L: 1.6 0.1 Rated Voltage 10 V Thickness 0.8 0.1 mm 0.8 0.1 W: Inner electrode Ni Termination Cu Plating Sn 100% 2.2 10 % tolerance mm mm (Pb Free) Product Special Normal Packaging Cardboard Type, 7" reel Reserved for future use B. Samsung Reliability Test and Judgement condition Performance 0.50.1Vrms More than 100Mohm Rated Voltage 60~120 sec. Appearance No abnormal exterior appearance Withstanding No dielectric breakdown or Visual inspection 250% of the rated voltage Voltage mechanical breakdown Temperature X7R Characteristics Adhesive Strength (From -55 to 125, Capacitance change should be within 15%) No peeling shall be occur on the 500gF, for 101 sec. of Termination terminal electrode Bending Strength Capacitance change : Tan (DF) Insulation Within specified tolerance Test condition 110% Capacitance 0.1 max. Resistance within 12.5% Bending to the limit (1mm) with 1.0mm/sec. Solderability More than 75% of terminal surface SnAg3.0Cu0.5 solder is to be soldered newly 2455, 30.3sec. (preheating : 80~120 for 10~30sec.) Resistance to Capacitance change : Soldering heat Tan , IR : initial spec. within 7.5% Solder pot : 2705, 101sec. Performance Vibration Test Capacitance change : within 5% Test condition Amplitude : 1.5mm Tan , IR : initial spec. From 10 to 55 (return : 1min.) Moisture Capacitance change : 2hours 3 direction (x, y, z) With rated voltage Resistance Tan : 0.125 max IR 402, 90~95%RH, 500+12/-0hrs : More than 12.5* High Temperature Capacitance change : Resistance Tan : 0.125 max IR within 12.5% within 12.5% With 150% of the rated voltage Max. operating temperature : More than 25* 1000+48/-0hrs Temperature Capacitance change : Cycling Tan , IR : initial spec. within 7.5% 1 cycle condition Min. operating temperature 25 25 Max. operating temperature 5 cycle test C. Recommended Soldering method : Reflow ( Reflow Peak Temperature : 260+0/-5, 10sec. Max ) * For the more detail Specification, Please refer to the Samsung MLCC catalogue.