Features Ultraminiature 25.4 x25.4x9.9mm Package 15 Watts Output Power Single and Dual Outputs 1.6kVDC Isolation Fixed Operating Frequency Six-Sided Continuous Shield Industry Standard Pinout Remote On/Off and Trim pins Efficiency to 89% Description The RP15-SA series are ultraminiature power DC/DC converters in a case half the size of industry standard 15W converters. Despite their small size, the RP15-SA converters are fully specified devices with output currents up to 4 Amps, no minimum load, 1600VDC isolation and low ripple/noise figures. The outputs are also fully protected against short circuits, overcurrent and overvoltage. The RP15-SA series will find many uses in applications where board space and/or board height is at a premium. POWERLINE DC/DC-Converter 15 Watt Single & Dual Output Selection Guide 24V and 48V Input Types Output Current mA Input(1) Current mA 3.3 4000 120/1375 84 1000F 5 3000 90/1524 86 1000F 9-18 12 1300 40/1605 85 330F RP15-1215SA** 9-18 15 1000 40/1506 87 220F RP15-243.3SA** 18-36 3.3 4000 50/671 86 1000F RP15-2405SA** 18-36 5 3000 65/763 86 1000F RP15-2412SA** 18-36 12 1300 20/783 87 330F RP15-2415SA** 18-36 15 1000 20/744 88 220F RP15-483.3SA** 36-75 3.3 4000 40/336 86 1000F RP15-4805SA** 36-75 5 3000 40/372 88 1000F RP15-4812SA** 36-75 12 1300 15/387 88 330F RP15-4815SA** 36-75 15 1000 15/372 88 220F RP15-1205DA** 9-18 5 1500 30/1543 85 500F RP15-1212DA** 9-18 12 625 30/1506 87 150F RP15-1215DA** 9-18 15 500 30/1488 87 100F RP15-2405DA** 18-36 5 1500 20/772 85 500F RP15-2412DA** 18-36 12 625 15/744 88 150F RP15-2415DA** 18-36 15 500 25/744 88 100F RP15-4805DA** 36-75 5 1500 15/386 85 500F RP15-4812DA** 36-75 12 625 15/368 89 150F RP15-4815DA** 36-75 15 500 20/372 88 100F Part Number Input Range VDC Output Voltage VDC RP15-123.3SA** 9-18 RP15-1205SA** 9-18 RP15-1212SA** Efficiency(2) Capacitive(3) Load max. % UL-60950-1 Certified E196683 RP15-A ** Standard part is without suffixes and Trim and CTRL pins are not fitted. * add suffix /P for CTRL function with positive logic (1=ON, 0=OFF) including trim pin for single output * add suffix /N for CTRL function with negative logic (0=ON, 1=OFF) including trim pin for single output * add suffix -HC for premounted heatsink and clips Ordering Examples RP15-2405SA/P = 24V Input, 5V Output, Positive Logic CTRL pin and Trim pin fitted RP15-4805DA-HC = 48V nput, 5V Output, Heatsink fitted Please Read Application Notes www.recom-international.com REV:0/2009 P-31 RP15-S_DA Series POWERLINE DC/DC-Converter Derating Graphs (ambient Temperature) 125 125 RP15-4805SA 100 50 75 Natural Convection Output Power (%) Output Power (%) 75 RP15-4805SA With Heat Sink 100 25 0 -40 -25 -10 0 50 60 Ambient Temperature Range (C) 68 50 Natural Convection 25 80 90 100 0 -40 -25 -10 0 50 60 Ambient Temperature Range (C) 73 80 90 100 Derating graphs are valid only for the shown part numbers. If you need detailed derating information about a part number not shown here please contact our technical support service at info@recom-development.at Specifications (typical at nominal input and 25C unless otherwise noted) Input Voltage Range 12V nominal input 24V nominal input 48V nominal input Input Filter Input Surge Voltage (100 ms max.) Pi Type 12V Input 24V Input 48V Input Input Reflected Ripple (nominal Vin and full load) (see Note 4) RP15-A 36VDC 50VDC 100VDC 30mAp-p Start Up Time (nominal Vin and constant resistor load) Optional Remote ON/OFF (See Note 5) (Negative logic) Remote Pin drive current Remote OFF input current 9-18VDC 18-36VDC 36-75VDC 30ms max. DC-DC ON DC-DC OFF Nominal Vin Nominal Vin Output Voltage Accuracy (full Load and nominal Vin) Short or 0V < Vr < 1.2V Open or 3.0V < Vr < 12V -0.5mA~1.0mA 2.5mA 1% Optional Output Trim (see Note 5) 10% Minimum Load 0% Line Regulation (low line, high line at full load) Single Dual 0.2% 0.5% Load Regulation (o% to full load) Single Dual 0.2% 1% Cross Regulation (Asymmetrical 25% <>100% load) Dual Output Ripple and Noise (20MHz bandwith) 3.3, 5V Outputs Others Temperature Coefficient Transient Response Over Voltage Protection Zener diode clamp (only single) 5% 75mVp-p 100mVp-p 0.02%/C max. 25% load step change 3.3V 5V 12V 15V Over Load Protection (% of full load at nominal Vin) 250s 3.7-5.4V 5.4-7.0V 13.5-19.6V 16.8-20.5V 150% typ Undervoltage Lockout See Application Notes Short Circuit Protection Hiccup, automatic recovery Efficiency see Selection Guide" table Isolation Voltage 1600VDC min. Isolation Resistance 1 G min. Isolation Capacitance 1000pF max. continued on next page P-32 REV: 0/2009 www.recom-electronic.com RP15-S_DA Series POWERLINE DC/DC-Converter Specifications (typical at nominal input and 25C unless otherwise noted) Operating Frequency 400kHz typ. Operating Temperature Range -40C to +85C(with derating) Maximum Case Temperature +105C Storage Temperature Range -55C to +125C Thermal Impedance (see Note 6) Natural convection Natural convection with Heat Sink 18.2C/Watt 15.8C/Watt Thermal Shock MIL-STD-810F Vibration 10-55Hz, 10G, 30 Min. along X, Y and Z Relative Humidity 5% to 95% RH Case Material Nickel plated copper Base Material FR4 PCB Potting Material Epoxy (UL94-V0) Conducted Emissions (see Note 7) Radiated Emissions ESD Radiated Immunity Fast Transient Surge (see note 8) Conducted Immunity EN55022 EN55022 EN61000-4-2 EN61000-4-3 EN61000-4-4 EN61000-4-5 EN61000-4-6 Level A Level A Perf. Criteria A Perf. Criteria A Perf. Criteria A Perf. Criteria A Perf. Criteria A Weight 15g Dimensions 25.4 x 25.4 x 9.9mm MTBF (see Note 9) 1330 x 103 hours 563 x 103 hours Bellcore TR-NWT-000332 MIL-HDBK 217F RP15-A Notes : 1. 2. 3. 4. 5. 6. 7. 8. 9. Values at nominal input voltage and no load/full load. Typical Value at nominal input voltage and full load. Test by minimum Vin and constant resistor load. Simulated source impedance of 12H. 12H inductor in series with +Vin. The ON/OFF control function can be positive or negative logic. The pin voltage is referenced to negative input. Positive logic ON/OFF is marked with suffix-P (eg. RP15-2405SA/P) Negative logic ON/OFF is marked with suffix-N (eg. RP15-2405SA/N). If no suffix is specified, the control pin will be omitted. Optional Heat-sink P/N is 7G-0047-F. Powerline DC/DC Converters can be ordered with pre-mounted heatsinks including antivibration fixing clips (add suffix -HC). See Application Notes for heatsink details. Meets Class A with external input capacitors shown below. Will meet Class B with external common mode filter (see Application Notes) Requires external capacitor to meet EN61000-4-5: 220F/100V, low ESR (48mOhm) BELLCORE TR-NWT-000332. Case l: 50% Stress, Temperature at 40C. MIL-HDBK 217F Notice 2. Ta = 25C, full load, (Ground, Benign, controlled environment). External Output Trimming (optional) With suffix /CTRL, the output can be externally trimmed by using the method shown here. See Application Notes for details 6 REV:0/2009 4 Trim Down RD RU 5 www.recom-international.com Trim Up 5 P-33 RP15-S_DA Series POWERLINE DC/DC-Converter Typical Characteristics RP15-4805SA RP15-4805SA 90 88 86 84 82 80 78 76 74 72 70 36 Efficiency VS Output load Efficiency (%) Efficiency (%) Efficiency VS Input Voltage 40 45 50 55 65 60 70 75 90 85 80 75 70 65 60 55 50 45 40 0 25 75 50 100 Output Load (%) Input Voltage (V) Package Style and Pinning (mm) 3rd angle projection 25.40 Pin Connections 25.40 9.9 5.60 1.0 dia 20.32 Pin # Single 1 2 3 4 5 6 +Vin -Vin no pin +Vout no pin -Vout Single/ P or /N +Vin -Vin CTRL +Vout Trim -Vout Dual +Vin -Vin no pin +Vout Com -Vout Dual/ P or /N +Vin -Vin CTRL +Vout Com -Vout RP15-A Case Tolerance 0.5 mm Pin Pitch Tolerance 0.25 mm 2.54 20.32 4 4 6 Bottom View Standard 1 10.16 6 2.54 Bottom View /CTRL Option 20.32 2 5.08 5 1 2 1.60o+0.15/0 2.54 10.16 2.54 3 5.08 2.54 2.54 Top View Footprint Details EMC Filtering - For Class B filter suggestion, see Application Notes Class A Filter Vin=12V: C1=10F/25V 1812 MLCC, C2 omitted. Vin=24V: C1=6.8F/50V 1812 MLCC, C2 omitted. Vin=48V: C1, C2 = 2.2F/100V 1812 MLCC P-34 Input + + C1 REV: 0/2009 C2 Output www.recom-electronic.com