Data sheet acquired from Harris Semiconductor
SCHS015C – Revised August 2003
The CD4001B, CD4002B, and CD4025B
types are supplied in 14-lead hermetic
dual-in-line ceramic packages (F3A
suffix), 14-lead dual-in-line plastic
packages (E suffix), 14-lead small-outline
packages (M, MT, M96, and NSR suffixes),
and 14-lead thin shrink small-outline
packages (PW and PWR suffixes).
Copyright © 2003, Texas Instruments Incorporated
PACKAGE OPTION ADDENDUM
www.ti.com 28-Jul-2020
Addendum-Page 1
PACKAGING INFORMATION
Orderable Device Status
(1)
Package Type Package
Drawing Pins Package
Qty Eco Plan
(2)
Lead finish/
Ball material
(6)
MSL Peak Temp
(3)
Op Temp (°C) Device Marking
(4/5)
Samples
7704403CA ACTIVE CDIP J 14 1 TBD SNPB N / A for Pkg Type -55 to 125 7704403CA
CD4002BF3A
CD4001BE ACTIVE PDIP N 14 25 Green (RoHS
& no Sb/Br) NIPDAU N / A for Pkg Type -55 to 125 CD4001BE
CD4001BEE4 ACTIVE PDIP N 14 25 Green (RoHS
& no Sb/Br) NIPDAU N / A for Pkg Type -55 to 125 CD4001BE
CD4001BF ACTIVE CDIP J 14 1 TBD SNPB N / A for Pkg Type -55 to 125 CD4001BF
CD4001BF3A ACTIVE CDIP J 14 1 TBD SNPB N / A for Pkg Type -55 to 125 CD4001BF3A
CD4001BM ACTIVE SOIC D 14 50 Green (RoHS
& no Sb/Br) NIPDAU Level-1-260C-UNLIM -55 to 125 CD4001BM
CD4001BM96 ACTIVE SOIC D 14 2500 Green (RoHS
& no Sb/Br) NIPDAU Level-1-260C-UNLIM -55 to 125 CD4001BM
CD4001BM96E4 ACTIVE SOIC D 14 2500 Green (RoHS
& no Sb/Br) NIPDAU Level-1-260C-UNLIM -55 to 125 CD4001BM
CD4001BM96G4 ACTIVE SOIC D 14 2500 Green (RoHS
& no Sb/Br) NIPDAU Level-1-260C-UNLIM -55 to 125 CD4001BM
CD4001BMT ACTIVE SOIC D 14 250 Green (RoHS
& no Sb/Br) NIPDAU Level-1-260C-UNLIM -55 to 125 CD4001BM
CD4001BNSR ACTIVE SO NS 14 2000 Green (RoHS
& no Sb/Br) NIPDAU Level-1-260C-UNLIM -55 to 125 CD4001B
CD4001BNSRG4 ACTIVE SO NS 14 2000 Green (RoHS
& no Sb/Br) NIPDAU Level-1-260C-UNLIM -55 to 125 CD4001B
CD4001BPW ACTIVE TSSOP PW 14 90 Green (RoHS
& no Sb/Br) NIPDAU Level-1-260C-UNLIM -55 to 125 CM001B
CD4001BPWR ACTIVE TSSOP PW 14 2000 Green (RoHS
& no Sb/Br) NIPDAU Level-1-260C-UNLIM -55 to 125 CM001B
CD4001BPWRG4 ACTIVE TSSOP PW 14 2000 Green (RoHS
& no Sb/Br) NIPDAU Level-1-260C-UNLIM -55 to 125 CM001B
CD4002BE ACTIVE PDIP N 14 25 Green (RoHS
& no Sb/Br) NIPDAU N / A for Pkg Type -55 to 125 CD4002BE
CD4002BF ACTIVE CDIP J 14 1 TBD SNPB N / A for Pkg Type -55 to 125 CD4002BF
PACKAGE OPTION ADDENDUM
www.ti.com 28-Jul-2020
Addendum-Page 2
Orderable Device Status
(1)
Package Type Package
Drawing Pins Package
Qty Eco Plan
(2)
Lead finish/
Ball material
(6)
MSL Peak Temp
(3)
Op Temp (°C) Device Marking
(4/5)
Samples
CD4002BF3A ACTIVE CDIP J 14 1 TBD SNPB N / A for Pkg Type -55 to 125 7704403CA
CD4002BF3A
CD4002BM ACTIVE SOIC D 14 50 Green (RoHS
& no Sb/Br) NIPDAU Level-1-260C-UNLIM -55 to 125 CD4002BM
CD4002BM96 ACTIVE SOIC D 14 2500 Green (RoHS
& no Sb/Br) NIPDAU Level-1-260C-UNLIM -55 to 125 CD4002BM
CD4002BMG4 ACTIVE SOIC D 14 50 Green (RoHS
& no Sb/Br) NIPDAU Level-1-260C-UNLIM -55 to 125 CD4002BM
CD4002BNSR ACTIVE SO NS 14 2000 Green (RoHS
& no Sb/Br) NIPDAU Level-1-260C-UNLIM -55 to 125 CD4002B
CD4002BPW ACTIVE TSSOP PW 14 90 Green (RoHS
& no Sb/Br) NIPDAU Level-1-260C-UNLIM -55 to 125 CM002B
CD4002BPWR ACTIVE TSSOP PW 14 2000 Green (RoHS
& no Sb/Br) NIPDAU Level-1-260C-UNLIM -55 to 125 CM002B
CD4025BE ACTIVE PDIP N 14 25 Green (RoHS
& no Sb/Br) NIPDAU N / A for Pkg Type -55 to 125 CD4025BE
CD4025BEE4 ACTIVE PDIP N 14 25 Green (RoHS
& no Sb/Br) NIPDAU N / A for Pkg Type -55 to 125 CD4025BE
CD4025BF ACTIVE CDIP J 14 1 TBD SNPB N / A for Pkg Type -55 to 125 CD4025BF
CD4025BF3A ACTIVE CDIP J 14 1 TBD SNPB N / A for Pkg Type -55 to 125 CD4025BF3A
CD4025BM ACTIVE SOIC D 14 50 Green (RoHS
& no Sb/Br) NIPDAU Level-1-260C-UNLIM -55 to 125 CD4025BM
CD4025BM96 ACTIVE SOIC D 14 2500 Green (RoHS
& no Sb/Br) NIPDAU Level-1-260C-UNLIM -55 to 125 CD4025BM
CD4025BMT ACTIVE SOIC D 14 250 Green (RoHS
& no Sb/Br) NIPDAU Level-1-260C-UNLIM -55 to 125 CD4025BM
CD4025BNSR ACTIVE SO NS 14 2000 Green (RoHS
& no Sb/Br) NIPDAU Level-1-260C-UNLIM -55 to 125 CD4025B
CD4025BPW ACTIVE TSSOP PW 14 90 Green (RoHS
& no Sb/Br) NIPDAU Level-1-260C-UNLIM -55 to 125 CM025B
CD4025BPWE4 ACTIVE TSSOP PW 14 90 Green (RoHS
& no Sb/Br) NIPDAU Level-1-260C-UNLIM -55 to 125 CM025B
JM38510/05252BCA ACTIVE CDIP J 14 1 TBD SNPB N / A for Pkg Type -55 to 125 JM38510/
05252BCA
PACKAGE OPTION ADDENDUM
www.ti.com 28-Jul-2020
Addendum-Page 3
Orderable Device Status
(1)
Package Type Package
Drawing Pins Package
Qty Eco Plan
(2)
Lead finish/
Ball material
(6)
MSL Peak Temp
(3)
Op Temp (°C) Device Marking
(4/5)
Samples
JM38510/05254BCA ACTIVE CDIP J 14 1 TBD SNPB N / A for Pkg Type -55 to 125 JM38510/
05254BCA
M38510/05252BCA ACTIVE CDIP J 14 1 TBD SNPB N / A for Pkg Type -55 to 125 JM38510/
05252BCA
M38510/05254BCA ACTIVE CDIP J 14 1 TBD SNPB N / A for Pkg Type -55 to 125 JM38510/
05254BCA
(1) The marketing status values are defined as follows:
ACTIVE: Product device recommended for new designs.
LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect.
NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design.
PREVIEW: Device has been announced but is not in production. Samples may or may not be available.
OBSOLETE: TI has discontinued the production of the device.
(2) RoHS: TI defines "RoHS" to mean semiconductor products that are compliant with the current EU RoHS requirements for all 10 RoHS substances, including the requirement that RoHS substance
do not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, "RoHS" products are suitable for use in specified lead-free processes. TI may
reference these types of products as "Pb-Free".
RoHS Exempt: TI defines "RoHS Exempt" to mean products that contain lead but are compliant with EU RoHS pursuant to a specific EU RoHS exemption.
Green: TI defines "Green" to mean the content of Chlorine (Cl) and Bromine (Br) based flame retardants meet JS709B low halogen requirements of <=1000ppm threshold. Antimony trioxide based
flame retardants must also meet the <=1000ppm threshold requirement.
(3) MSL, Peak Temp. - The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature.
(4) There may be additional marking, which relates to the logo, the lot trace code information, or the environmental category on the device.
(5) Multiple Device Markings will be inside parentheses. Only one Device Marking contained in parentheses and separated by a "~" will appear on a device. If a line is indented then it is a continuation
of the previous line and the two combined represent the entire Device Marking for that device.
(6) Lead finish/Ball material - Orderable Devices may have multiple material finish options. Finish options are separated by a vertical ruled line. Lead finish/Ball material values may wrap to two
lines if the finish value exceeds the maximum column width.
Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information
provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and
continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals.
TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release.
In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis.
PACKAGE OPTION ADDENDUM
www.ti.com 28-Jul-2020
Addendum-Page 4
OTHER QUALIFIED VERSIONS OF CD4001B, CD4001B-MIL, CD4002B, CD4002B-MIL, CD4025B, CD4025B-MIL :
•Catalog: CD4001B, CD4002B, CD4025B
•Military: CD4001B-MIL, CD4002B-MIL, CD4025B-MIL
NOTE: Qualified Version Definitions:
•Catalog - TI's standard catalog product
•Military - QML certified for Military and Defense Applications
TAPE AND REEL INFORMATION
*All dimensions are nominal
Device Package
Type Package
Drawing Pins SPQ Reel
Diameter
(mm)
Reel
Width
W1 (mm)
A0
(mm) B0
(mm) K0
(mm) P1
(mm) W
(mm) Pin1
Quadrant
CD4001BM96 SOIC D 14 2500 330.0 16.4 6.5 9.0 2.1 8.0 16.0 Q1
CD4001BMT SOIC D 14 250 330.0 16.4 6.5 9.0 2.1 8.0 16.0 Q1
CD4001BNSR SO NS 14 2000 330.0 16.4 8.2 10.5 2.5 12.0 16.0 Q1
CD4001BPWR TSSOP PW 14 2000 330.0 12.4 6.9 5.6 1.6 8.0 12.0 Q1
CD4002BM96 SOIC D 14 2500 330.0 16.4 6.5 9.0 2.1 8.0 16.0 Q1
CD4002BNSR SO NS 14 2000 330.0 16.4 8.2 10.5 2.5 12.0 16.0 Q1
CD4002BPWR TSSOP PW 14 2000 330.0 12.4 6.9 5.6 1.6 8.0 12.0 Q1
CD4025BM96 SOIC D 14 2500 330.0 16.4 6.5 9.0 2.1 8.0 16.0 Q1
CD4025BMT SOIC D 14 250 330.0 16.4 6.5 9.0 2.1 8.0 16.0 Q1
CD4025BNSR SO NS 14 2000 330.0 16.4 8.2 10.5 2.5 12.0 16.0 Q1
PACKAGE MATERIALS INFORMATION
www.ti.com 29-Jul-2020
Pack Materials-Page 1
*All dimensions are nominal
Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm)
CD4001BM96 SOIC D 14 2500 367.0 367.0 38.0
CD4001BMT SOIC D 14 250 210.0 185.0 35.0
CD4001BNSR SO NS 14 2000 367.0 367.0 38.0
CD4001BPWR TSSOP PW 14 2000 367.0 367.0 35.0
CD4002BM96 SOIC D 14 2500 367.0 367.0 38.0
CD4002BNSR SO NS 14 2000 367.0 367.0 38.0
CD4002BPWR TSSOP PW 14 2000 367.0 367.0 35.0
CD4025BM96 SOIC D 14 2500 367.0 367.0 38.0
CD4025BMT SOIC D 14 250 210.0 185.0 35.0
CD4025BNSR SO NS 14 2000 367.0 367.0 38.0
PACKAGE MATERIALS INFORMATION
www.ti.com 29-Jul-2020
Pack Materials-Page 2
www.ti.com
PACKAGE OUTLINE
C
14X .008-.014
[0.2-0.36]
TYP
-15
0
AT GAGE PLANE
-.314.308 -7.977.83[ ]
14X -.026.014 -0.660.36[ ]
14X -.065.045 -1.651.15[ ]
.2 MAX TYP
[5.08] .13 MIN TYP
[3.3]
TYP-.060.015 -1.520.38[ ]
4X .005 MIN
[0.13]
12X .100
[2.54]
.015 GAGE PLANE
[0.38]
A
-.785.754 -19.9419.15[ ]
B -.283.245 -7.196.22[ ]
CDIP - 5.08 mm max heightJ0014A
CERAMIC DUAL IN LINE PACKAGE
4214771/A 05/2017
NOTES:
1. All controlling linear dimensions are in inches. Dimensions in brackets are in millimeters. Any dimension in brackets or parenthesis are for
reference only. Dimensioning and tolerancing per ASME Y14.5M.
2. This drawing is subject to change without notice.
3. This package is hermitically sealed with a ceramic lid using glass frit.
4. Index point is provided on cap for terminal identification only and on press ceramic glass frit seal only.
5. Falls within MIL-STD-1835 and GDIP1-T14.
78
14
1
PIN 1 ID
(OPTIONAL)
SCALE 0.900
SEATING PLANE
.010 [0.25] C A B
www.ti.com
EXAMPLE BOARD LAYOUT
ALL AROUND
[0.05] MAX.002
.002 MAX
[0.05]
ALL AROUND
SOLDER MASK
OPENING
METAL
(.063)
[1.6]
(R.002 ) TYP
[0.05]
14X ( .039)
[1]
( .063)
[1.6]
12X (.100 )
[2.54]
(.300 ) TYP
[7.62]
CDIP - 5.08 mm max heightJ0014A
CERAMIC DUAL IN LINE PACKAGE
4214771/A 05/2017
LAND PATTERN EXAMPLE
NON-SOLDER MASK DEFINED
SCALE: 5X
SEE DETAIL A SEE DETAIL B
SYMM
SYMM
1
78
14
DETAIL A
SCALE: 15X
SOLDER MASK
OPENING
METAL
DETAIL B
13X, SCALE: 15X
IMPORTANT NOTICE AND DISCLAIMER
TI PROVIDES TECHNICAL AND RELIABILITY DATA (INCLUDING DATASHEETS), DESIGN RESOURCES (INCLUDING REFERENCE
DESIGNS), APPLICATION OR OTHER DESIGN ADVICE, WEB TOOLS, SAFETY INFORMATION, AND OTHER RESOURCES “AS IS”
AND WITH ALL FAULTS, AND DISCLAIMS ALL WARRANTIES, EXPRESS AND IMPLIED, INCLUDING WITHOUT LIMITATION ANY
IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NON-INFRINGEMENT OF THIRD
PARTY INTELLECTUAL PROPERTY RIGHTS.
These resources are intended for skilled developers designing with TI products. You are solely responsible for (1) selecting the appropriate
TI products for your application, (2) designing, validating and testing your application, and (3) ensuring your application meets applicable
standards, and any other safety, security, or other requirements. These resources are subject to change without notice. TI grants you
permission to use these resources only for development of an application that uses the TI products described in the resource. Other
reproduction and display of these resources is prohibited. No license is granted to any other TI intellectual property right or to any third
party intellectual property right. TI disclaims responsibility for, and you will fully indemnify TI and its representatives against, any claims,
damages, costs, losses, and liabilities arising out of your use of these resources.
TI’s products are provided subject to TI’s Terms of Sale (www.ti.com/legal/termsofsale.html) or other applicable terms available either on
ti.com or provided in conjunction with such TI products. TI’s provision of these resources does not expand or otherwise alter TI’s applicable
warranties or warranty disclaimers for TI products.
Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265
Copyright © 2020, Texas Instruments Incorporated
