SEMICONDUCTOR GENERAL CATALOG Optical Semiconductor Devices Visible LEDs Photosensors Photocouplers and Photorelays Fiber-Optic Devices (TOSLINKTM) Image Sensors 1 2010/8 SCE0004J Visible LEDs Dual-Color LED Lamps Part Number TLRMHGH48T(F) TLRMHGH48M(F) Source Color Intensity (mcd) IF = 20 mA Min Typ. Red 476 1100 Green 272 500 Red 272 450 Green 153 220 Optical Characteristics (Ta = 25C) Typical Emitting Viewing Angle Wavelength 21/2 () p (nm) d (nm) 30/35 45/50 626 636 571 574 626 636 571 574 Lens Color Absolute Maximum DC Forward Current Rating IF (mA) @Ta = 25C Transparent (Lens diameter: 5 mm) 50 (Total) Milky white diffused (Lens diameter: 5 mm) 50 (Total) Typical Applications Message boards * Contact the Toshiba sales representative for information about RoHS compliance before you purchase any components. 2 2010/8 SCE0004J High-Brightness LED Lamps ( 5 ) Part Number TLRME20CP(F) TLSH20TP(F) TLRMH20TP(F) TLSE20TP(F) TLRME20TP(F) TLRE20TP(F) TLSH38TP(F) TLRMH38TP(F) TLSH17TP(F) TLRMH17TP(F) TLRH17TP(F) TLSE17TP(F) TLRME17TP(F) TLRE17TP(F) TLRMK37TP(F) * TLSH16TP(F) TLSH16CP(F) TLRMH16TP(F) TLRMH16CP(F) TLSE16TP(F) TLSE16CP(F) TLRME16TP(F) TLRE16TP(F) TLRME16CP(F) TLRE16CP(F) TLRME17DP(F) TLRMK16TAP(F) * TLSE30TP(F) TLRE30TP(F) TLSH30TP(F) TLRMH30TP(F) TLRH30TP(F) TLRMH30MP(F) TLRE25TP(F) TLRE11TP(F) TLOH20TP(F) TLOE20TP(F) TLOH38TP(F) TLOH17TP(F) TLOE17TP(F) TLOE17CP(F) TLOH16TP(F) TLOH16CP(F) TLOE16TP(F) TLOE16CP(F) TLOE30TP(F) TLOH30TP(F) TLOE25TP(F) TLOE11TP(F) Source Color Red Orange Intensity (mcd) IF = 20 mA Optical Characteristics (Ta = 25C) Typical Emitting Viewing Angle Wavelength 2*1/2 () d (nm) p (nm) Lens Color Absolute Maximum DC Forward Current Rating IF (mA) @Ta = 25C Min Typ. 4760 12000 626 636 Red transparent 50 4760 11000 613 623 Transparent 50 2720 9000 626 636 Transparent 50 2720 9000 613 623 Transparent 50 2720 8000 626 636 Transparent 50 2720 7000 630 644 Transparent 50 2720 6500 613 623 Transparent 50 1530 4800 626 636 Transparent 50 7 12 1530 4500 613 623 Transparent 50 850 3200 626 636 Transparent 50 850 2000 630 644 Transparent 50 850 3000 613 623 Transparent 50 850 2400 626 636 Transparent 50 476 1500 630 644 Transparent 50 1530 5600 626 636 Transparent 50 850 1900 613 623 Transparent 50 476 1500 613 623 Red transparent 50 476 1500 626 636 Transparent 50 476 1300 626 636 Red transparent 50 476 1500 613 623 Transparent 50 476 1000 613 623 Red transparent 50 272 1200 626 636 Transparent 50 272 800 630 644 Transparent 50 272 800 626 636 Red transparent 50 153 600 630 644 Red transparent 50 153 500 1530 5400 272 1000 153 600 476 1300 476 950 272 680 272 600 47.6 20 23 25 626 636 Red diffused 50 626 636 Transparent 50 613 623 Transparent 50 630 644 Transparent 50 613 623 Transparent 50 626 636 Transparent 50 630 644 Transparent 50 40 626 636 Milky white diffused 50 150 75 630 644 Transparent 50 8.5 20 130 630 644 Transparent 50 4760 15000 605 612 Transparent 50 4760 10000 605 612 Transparent 50 2720 7500 605 612 Transparent 50 1530 5000 605 612 Transparent 50 1530 4500 605 612 Transparent 50 1530 3500 605 612 Orange transparent 50 850 2300 605 612 Transparent 50 850 2100 605 612 Orange transparent 50 850 2000 605 612 Transparent 50 476 1600 605 612 Orange transparent 50 476 1400 30 605 612 Transparent 50 476 1600 33 605 612 Transparent 50 153 350 75 605 612 Transparent 50 27.2 65 130 605 612 Transparent 50 30 30 33 7 12 20 25 * Contact the Toshiba sales representative for information about RoHS compliance before you purchase any components. 3 Typical Applications Pilot lamps (narrow range) Message boards Backlighting Backlighting (wide range) Pilot lamps (narrow range) Message boards Backlighting Backlighting (wide range) *: New product 2010/8 SCE0004J High-Brightness LED Lamps ( 5 ) (Continued) Optical Characteristics (Ta = 25C) Part Number TLYH20TP(F) TLYE20TP(F) TLYH38TP(F) TLYH17TP(F) TLYE17TP(F) TLYE17CP(F) TLYK37TP(F) * TLYH16TP(F) TLYH16CP(F) TLYE16TP(F) TLYE16CP(F) TLYE30TP(F) TLYK16TAP(F) * TLYH30TP(F) TLYE25TP(F) TLYE11TP(F) TLPYE23TP(F) TLPYE19TP(F) Source Color Yellow Intensity (mcd) IF = 20 mA Typical Emitting Wavelength Viewing Angle 2*1/2 () Lens Color Absolute Maximum DC Forward Current Rating IF (mA) @Ta = 25C d (nm) p (nm) 587 590 Transparent 587 590 Transparent 50 587 590 Transparent 50 587 590 Transparent 50 587 590 Transparent 50 587 590 Yellow transparent 50 590 594 Transparent 50 2200 587 590 Transparent 50 2000 587 590 Yellow transparent 50 587 590 Transparent 50 587 590 Yellow transparent 50 50 Min Typ. 4760 13000 2720 9500 2720 7000 1530 4800 850 3000 850 3000 2720 6800 850 850 476 1500 476 1200 7 12 20 23 25 50 476 1300 30 587 590 Transparent 2720 5900 30 590 594 Transparent 50 476 1350 33 587 590 Transparent 50 85 300 75 587 590 Transparent 50 15.3 45 130 587 590 Transparent 50 2720 8000 5 580 583 Transparent 50 476 2000 18 580 583 Transparent 50 TLPYE18TP(F) 272 750 30 580 583 Transparent 50 TLGE23TP(F) TLGU23TP(F) TLGE19TP(F) TLGE19CP(F) TLGE18TP(F) TLGE18CP(F) TLGU18TP(F) TLGU18CP(F) TLGU13CP(F) TLGU13DP(F) TLGE25TP(F) TLGE11TP(F) TLFGE23TP(F) TLFGE19TP(F) TLFGE19CP(F) 2720 7000 571 574 Transparent 50 1530 4000 571 574 Transparent 30 476 1300 571 574 Transparent 50 476 1100 571 574 Green transparent 50 272 700 571 574 Transparent 50 Pure yellow Green 5 18 153 500 85 200 47.6 180 47.6 120 45 27.2 70 55 30 571 574 Green transparent 50 571 574 Transparent 30 571 574 Green transparent 30 571 574 Green transparent 30 571 574 Green diffused 30 27.2 90 75 571 574 Transparent 50 8.5 20 130 571 574 Transparent 50 1530 5000 5 565 568 Transparent 50 272 800 565 568 Transparent 50 272 800 565 568 Green transparent 50 TLFGE18TP(F) 85 300 565 568 Transparent 50 TLPGE23TP(F) TLPGU23TP(F) TLPGE19TP(F) TLPGE18TP(F) TLPGU18TP(F) TLPGU13CP(F) TLPGU13DP(F) 850 3000 558 562 Transparent 50 476 1600 558 562 Transparent 30 153 500 558 562 Transparent 50 85 200 558 562 Transparent 50 27.2 90 558 562 Transparent 30 27.2 80 558 562 Green transparent 30 Fresh green Pure green 18 30 5 18 30 45 Typical Applications Pilot lamps (narrow range) Message boards Backlighting Backlighting (wide range) Pilot lamps (narrow range) Message boards Backlighting Pilot lamps (narrow range) Message boards Backlighting Backlighting (wide range) Pilot lamps (narrow range) Message boards Backlighting Pilot lamps (narrow range) Message boards Backlighting 15.3 35 55 558 562 Green diffused 30 TLPGE11TP(F) 2.72 8 130 558 562 Transparent 50 Backlighting (wide range) TLGTC16TP(F) 1530 6000 18 505 503 Transparent 30 Pilot lamps (narrow range) TLGTC30TP(F) TLGTC32TP(F) Bluish green 850 3200 25 505 503 Transparent 30 850 2500 33 505 503 Transparent 30 * Contact the Toshiba sales representative for information about RoHS compliance before you purchase any components. 4 Message boards Backlighting *: New product 2010/8 SCE0004J High-Brightness LED Lamps ( 3 ) Optical Characteristics (Ta = 25C) Part Number TLSH50T(F) TLRH50T(F) TLSE50T(F) TLRME50C(F) TLRME50T(F) TLRE50T(F) TLSE53T(F) TLRME53T(F) TLRE53T(F) TLRME68TG(F) TLRME68CG(F) TLSE62T(F) TLRH62T(F) TLRME62T(F) TLRE62T(F) TLRME68DG(F) TLRE60T(F) TLOE50C(F) TLOH50T(F) TLOE50T(F) TLOE53T(F) TLOH62T(F) TLOE62T(F) TLOE60T(F) TLYH50T(F) TLYE50T(F) TLYE50C(F) TLYE53T(F) TLYH68TG(F) TLYH62T(F) TLYE68TG(F) TLYE68CG(F) TLYE62T(F) TLYE68DG(F) TLYE60T(F) TLPYE50T(F) TLPYE53T(F) Source Color Red Orange Intensity (mcd) IF = 20 mA Viewing Angle 2*1/2 () Typ. 4700 613 623 Transparent 50 850 2000 630 644 Transparent 50 1530 3500 613 623 Transparent 50 1530 3500 626 636 Red transparent 50 850 2500 626 636 Transparent 50 850 2200 630 644 Transparent 50 272 800 613 623 Transparent 50 272 600 626 636 Transparent 50 153 400 630 644 Transparent 50 85 330 626 636 Transparent 50 85 260 626 636 Red transparent 50 85 200 613 623 Transparent 50 47.6 180 630 644 Transparent 50 47.6 180 626 636 Transparent 50 47.6 120 630 644 Transparent 50 47.6 140 100 626 636 Red transparent 50 120 630 644 Transparent 50 605 612 Orange transparent 50 605 612 Transparent 50 605 612 Transparent 50 15.3 45 2720 7000 1530 5800 1530 4500 272 1000 153 550 153 350 16 45 80 16 45 80 100 4400 1530 3500 1530 3500 272 800 272 520 153 400 85 340 85 300 85 250 47.6 150 100 27.2 85 850 2500 153 TLPYE62T(F) TLGU50T(F) TLGE50T(F) TLGU53T(F) TLGU53C(F) TLGE53T(F) TLGU53D(F) TLGU62T(F) TLGE68TG(F) TLGE68CG(F) TLGE62T(F) TLGE68DG(F) TLGE60T(F) TLFGE50T(F) TLFGE50C(F) TLFGE53T(F) TLFGE68CG(F) TLFGE62T(F) TLFGE68DG(F) TLPGU50T(F) TLPGE50T(F) TLPGU53T(F) TLPGU53C(F) TLPGE53T(F) TLPGU53D(F) TLPGE62T(F) TLPGU62T(F) Pure yellow Green Fresh green Pure green p (nm) Absolute Maximum DC Forward Current Rating Typical Applications IF (mA) @Ta = 25C) Min 27.2 Yellow d (nm) Lens Color 2720 1530 Typical Emitting Wavelength 120 16 45 80 605 612 Transparent 50 605 612 Transparent 50 605 612 Transparent 50 605 612 Transparent 50 587 590 Transparent 50 587 590 Transparent 50 587 590 Yellow transparent 50 587 590 Transparent 50 587 590 Transparent 50 587 590 Transparent 50 587 590 Transparent 50 587 590 Yellow transparent 50 587 590 Transparent 50 587 590 Yellow diffused 50 120 587 590 Transparent 50 16 580 583 Transparent 50 450 45 580 583 Transparent 50 47.6 150 80 580 583 Transparent 50 476 1200 10 571 574 Transparent 30 476 1500 16 571 574 Transparent 50 47.6 170 571 574 Transparent 30 47.6 150 571 574 Green transparent 30 50 40 153 400 45 571 574 Transparent 27.2 80 50 571 574 Green diffused 30 27.2 70 571 574 Transparent 30 47.6 155 571 574 Transparent 50 47.6 110 571 574 Green transparent 50 47.6 110 571 574 Transparent 50 15.3 45 100 571 574 Green diffused 50 15.3 50 120 571 574 Transparent 50 272 1000 565 568 Transparent 50 272 1000 565 568 Green transparent 50 85 200 565 568 Transparent 50 565 568 Green transparent 50 565 568 Transparent 50 27.2 70 27.2 70 80 16 45 80 15.3 30 100 565 568 Green diffused 50 153 450 10 558 562 Transparent 30 16 558 562 Transparent 50 558 562 Transparent 30 558 562 Green transparent 30 50 153 600 27.2 80 27.2 70 47.6 130 45 558 562 Transparent 15.3 40 50 558 562 Green diffused 30 15.3 45 558 562 Transparent 50 8.5 25 558 562 Transparent 30 40 80 Pilot lamps Backlighting (wide range) Pilot lamps Backlighting (wide range) Pilot lamps Backlighting (wide range) Pilot lamps Backlighting (wide range) Pilot lamps Backlighting (wide range) Pilot lamps Backlighting (wide range) Pilot lamps Backlighting (wide range) : Mount flush with PCB * Contact the Toshiba sales representative for information about RoHS compliance before you purchase any components. 5 2010/8 SCE0004J High-Brightness LED Lamps (Other) Part Number TLSE27C(F) TLRH27T(F) TLRME27C(F) TLRE27C(F) TLOE27C(F) TLYH27T(F) TLYE27C(F) TLGE27C(F) TLRE28C(F) TLRME28C(F) TLSE28C(F) TLYH28C(F) TLYE28C(F) TLOE28C(F) TLGH28C(F) TLGE28C(F) TLOE33CP(F) TLYE33CP(F) TLPYE33CP(F) TLFGE33CP(F) TLGE33CP(F) TLGE33TP(F) Package Source Color Size (mm) Red Orange Oval 5 x 5.8 Yellow Green Red Optical Characteristics (Ta = 25C) Intensity (mcd) IF = 20 mA Typical Emitting Wavelength Viewing Angle 2*1/2 () Lens Color Absolute Maximum DC Forward Current Rating IF (mA) @Ta = 25C Min Typ. d (nm) p (nm) 272 750 30/50 613 623 Red transparent 50 153 450 40/70 630 644 Transparent 50 153 400 626 636 Red transparent 50 85 300 630 644 Red transparent 50 272 800 30/50 605 612 Orange transparent 50 272 900 40/70 587 590 Transparent 50 272 650 30/50 587 590 Yellow transparent 50 85 250 30/50 571 574 Green transparent 50 85 200 630 644 Red transparent 50 626 636 Red transparent 50 613 623 Red transparent 50 587 590 Yellow transparent 50 587 590 Yellow transparent 50 605 612 Orange transparent 50 30/50 80/50 85 200 85 300 272 750 153 350 153 500 47.6 170 70/50 571 574 Green transparent 50 47.6 150 80/50 571 574 Green transparent 50 Orange 1530 4000 605 612 Orange transparent 50 Yellow 1530 3500 587 590 Yellow transparent 50 476 1400 580 583 Yellow transparent 50 153 400 565 568 Green transparent 50 Yellow Oval 4.3 x 5 Orange Green Pure yellow Fresh green Green Arched 5 x 2.5 70/50 80/50 10 272 800 571 574 Green transparent 50 476 1300 571 574 Transparent 50 Typical Applications Message boards Backlighting * Contact the Toshiba sales representative for information about RoHS compliance before you purchase any components. 6 2010/8 SCE0004J Surface-Mount LED Lamps (1608) Optical Characteristics (Ta = 25C) Part Number Source Color TLRE1008A(T04)/(T05) TLSE1008A(T04)/(T05) TLOE1008A(T04)/(T05) TLYE1008A(T04)/(T05) TLPYE1008A(T04)/(T05) TLGE1008A(T04)/(T05) TLFGE1008A(T04)/(T05) TLPGE1008A(T04)/(T05) TLSU1008A(T04)/(T05) TLOU1008A(T04)/(T05) TLAU1008A(T04)/(T05) TLYU1008A(T04)/(T05) TLGU1008A(T04)/(T05) TLPGU1008A(T04)/(T05) TLRV1022(T14,F)/(T15,F) TLRMV1022(T14,F)/(T15,F) TLSV1022(T14,F)/(T15,F) TLOV1022(T14,F)/(T15,F) TLAV1022(T14,F)/(T15,F) TLYV1022(T14,F)/(T15,F) TLGV1022(T14,F)/(T15,F) TLPGV1022(T14,F)/(T15,F) TLRH1032(T14,F)/(T15,F) TLRMH1032(T14,F)/(T15,F) TLSH1032(T14,F)/(T15,F) TLOH1032(T14,F)/(T15,F) TLYH1032(T14,F)/(T15,F) TLGH1032(T14,F)/(T15,F) TLFGH1032(T14,F)/(T15,F) Package Size (mm) Intensity IV (mcd) Typical Emitting Wavelength Min Typ. d (nm) p (nm) Red 27.2 70 630 644 Red 47.6 135 613 623 Orange 47.6 150 605 612 Yellow 27.2 105 587 590 Pure yellow 27.2 70 580 583 Green Fresh green Pure green 1.6(L) x 0.8(W) x 0.6(H) (PCB type) 27.2 70 571 574 8.5 30 565 568 4.76 18 558 562 Red 27.2 60 623 636 Orange 27.2 78 605 612 Amber 8.5 30 592 596 Yellow 8.5 30 587 590 Green 8.5 30 571 574 Pure green 1.53 6 558 562 Red 4.76 15 630 644 Red 4.76 20 626 636 623 Red 8.5 30 613 Orange 8.5 38 605 612 Amber 8.5 25 592 596 Yellow 8.5 25 587 590 Green Pure green Red 1.6(L) x 0.8(W) x 0.45(H) (ESC type) Red 4.76 14 571 574 1.53 3.5 561 558 25 56 630 644 40 85 626 636 623 Red 63 160 613 Orange 100 200 605 612 Yellow 40 100 587 590 Green 25 60 571 574 Fresh green 10 25 565 568 Viewing Angle 2*1/2 () IF (mA) 130 to 135 20 Packaging Specification Embossed tape Tape No.: T04 4-mm pitch 4000 pcs/reel Tape No.: T05 2-mm pitch 8000 pcs/reel 100 to 110 5 135 to 140 Embossed tape Tape No.: T14 4-mm pitch 4000 pcs/reel Tape No.: T15 2-mm pitch 8000 pcs/reel 20 : Dry-packed * Contact the Toshiba sales representative for information about RoHS compliance before you purchase any components. Surface-Mount LED Lamps (2125) Optical Characteristics (Ta = 25C) Part Number TLRE1002A(T02) TLSE1002A(T02) TLOE1002A(T02) TLYE1002A(T02) TLPYE1002A(T02) TLGE1002A(T02) TLFGE1002A(T02) TLPGE1002A(T02) TLRU1002A(T02) TLSU1002A(T02) TLOU1002A(T02) TLAU1002A(T02) TLYU1002A(T02) TLGU1002A(T02) TLPGU1002A(T02) Source Color Package Size (mm) Intensity IV (mcd) Typical Emitting Wavelength p (nm) Min Typ. d (nm) Red 27.2 70 630 644 Red 47.6 135 613 623 Orange 47.6 150 605 612 Yellow 27.2 105 587 590 Pure yellow 27.2 70 580 583 Green 27.2 70 571 574 Fresh green 8.5 25 565 568 Pure green 2.0(L) x 1.25(W) x 1.1(H) 4.76 18 558 562 Red 4.76 45 630 644 Red 27.2 60 623 636 Orange 27.2 78 605 612 Amber 8.5 30 592 596 Yellow 8.5 30 587 590 Green 8.5 30 571 574 Pure green 1.53 6 558 562 Viewing Angle 2*1/2 () IF (mA) Packaging Specification 130 to 140 20 Embossed tape Tape No.: T02 4-mm pitch 3000 pcs/reel 120 to 130 : Dry-packed * Contact the Toshiba sales representative for information about RoHS compliance before you purchase any components. 7 2010/8 SCE0004J Surface-Mount LED Lamps (3.6 Lens-Top) Optical Characteristics (Ta = 25C) Part Number TLRM1050(T20) TLRMM1050(T20) TLSM1050(T20) TLOM1050(T20) TLYM1050(T20) TLRM1052(T20) TLRMM1052(T20) TLSM1052(T20) TLOM1052(T20) TLYM1052(T20) TLRMH1050(T20) TLSH1050(T20) TLOH1050(T20) TLYH1050(T20) TLGH1050(T20) TLFGH1050(T20) TLEGD1050(T20) TLBD1050(T20) TLRMH1052(T20) TLSH1052(T20) TLOH1052(T20) TLYH1052(T20) TLGH1052(T20) TLFGH1052(T20) TLEGD1052(T20) TLBD1052(T20) TLRMF1050(T20) TLSF1050(T20) TLOF1050(T20) TLYF1050(T20) TLGF1050(T20) TLFGF1050(T20) TLPGF1050(T20) TLRMF1052(T20) TLSF1052(T20) TLOF1052(T20) TLYF1052(T20) TLGF1052(T20) TLFGF1052(T20) TLPGF1052(T20) * * * * * * * * * * Source Color Package Size (mm) Intensity IV (mcd) Typical Emitting Wavelength p (nm) Min Typ. d (nm) Red 630 1800 630 644 Red 1000 2000 626 636 Red 5.2(L) x 5.2(W) x 4.0(H) with 3.6 lens 1600 2800 613 623 Orange 1600 3500 605 612 Yellow 1600 3000 590 592 Red 630 1200 630 644 Red 630 1300 626 636 1000 1900 613 623 1000 2200 605 612 Yellow 1000 1900 590 592 Red 272 700 626 636 Red 476 1400 613 623 476 1500 605 612 476 1000 587 590 272 600 571 574 568 Red Orange 5.2(L) x 5.2(W) x 4.0(H) with 3.6 x 4.4 Oval lens Orange Yellow Green 5.2(L) x 5.2(W) x 4.0(H) with 3.6 lens Fresh green 85 250 565 Green 476 1300 528 518 Blue 153 400 470 468 Red 153 450 626 636 Red 272 900 613 623 476 1000 605 612 272 750 587 590 153 400 571 574 Fresh green 85 190 565 568 Green 272 850 528 518 Blue 85 300 470 468 Red 250 700 626 636 Red 630 1400 613 623 630 1500 605 612 630 1000 587 590 400 900 571 574 Fresh green 160 370 565 568 Pure green 100 180 558 562 Red 160 450 626 636 Red 400 900 613 623 Orange 400 1000 605 612 Orange Yellow Green Orange Yellow Green Yellow 5.2(L) x 5.2(W) x 4.0(H) with 3.6 x 4.4 Oval lens 5.2(L) x 5.2(W) x 4.0(H) with 3.6 lens 5.2(L) x 5.2(W) x 4.0(H) with 3.6 x 4.4 Oval lens 250 750 587 590 250 600 571 574 Fresh green 100 280 565 568 Pure green 63 140 558 562 Green Viewing Angle 2*1/2 () IF (mA) Packaging Specification 35 20 30/85 30 20 40 Embossed tape Tape No.: T20 8-mm pitch 400 pcs/reel 30/85 20 30/75 30 20 30/85 20 : Dry-packed *: New product * Contact the Toshiba sales representative for information about RoHS compliance before you purchase any components. Mini PLCC LED Lamps (Flat-Top) Optical Characteristics (Ta = 25C) Part Number TLRF1060(T18) TLSF1060(T18) TLOF1060(T18) TLYF1060(T18) TLPYF1060(T18) TLGF1060(T18) TLFGF1060(T18) TLPGF1060(T18) TLEGD1060(T18) TLBD1060(T18) TLCBD1060(T18) TLWD1060(T18) Source Color Package Size (mm) Intensity IV (mcd) Typical Emitting Wavelength Min Typ. d (nm) p (nm) Red 40 100 630 644 Red 100 200 613 623 Orange 100 220 605 612 Yellow 63 180 587 590 Pure yellow 40 100 580 583 Green 40 80 571 574 Fresh green 2.2(L) x 1.4(W) x 1.3(H) 25 50 565 568 Pure green 10 20 558 562 Green 63 150 528 523 Blue 25 60 470 468 Ice blue 40 100 0.2/0.3 White 40 100 0.32/0.31 Viewing Angle 2*1/2 () IF (mA) 100 20 100 10 Packaging Specification Embossed tape Tape No.: T18 4-mm pitch 3000 pcs/reel : Dry-packed : CIE1931 (chromaticity coordinate) (typ.) * Contact the Toshiba sales representative for information about RoHS compliance before you purchase any components. 8 2010/8 SCE0004J PLCC SMD LED Lamps (Flat-Top) Optical Characteristics (Ta = 25C) Part Number TLRK1100C(T11) TLRMK1100C(T11) TLSK1100C(T11) TLOK1100C(T11) TLYK1100C(T11) TLRH1100B(T11) TLRMH1100B(T11) TLSH1100B(T11) TLOH1100B(T11) TLYH1100B(T11) TLGH1100B(T11) TLFGH1100B(T11) TLPGH1100B(T11) TLRE1100B(T11) TLSE1100B(T11) TLOE1100B(T11) TLYE1100B(T11) TLGE1100B(T11) TLFGE1100B(T11) TLPGE1100B(T11) TLEGE1100B(T11) TLGTE1100B(T11) TLBE1100B(T11) TLEGD1100B(T11) TLBD1100B(T11) TLBA1100B(T11) TLCBD1100B(T11) TLWD1100B(T11) TLCBK1100B(T11) TLEGF1100C(T11) TLBF1100C(T11) TLWF1100C(T11) TLWNF1100C(T11) TLWLF1100C(T11) TLWK1100C(T11) TLWLK1100B(T11) TLWWK1100B(T11) TLRH1106(T11) TLRMH1106(T11) TLSH1106(T11) TLOH1106(T11) TLYH1106(T11) TLGH1106(T11) TLRM1108(T11) TLRMM1108(T11) TLSM1108(T11) TLOM1108(T11) TLYM1108(T11) TLWK1109(T11) TLWNK1109(T11) TLWLK1109(T11) Source Color * * * * * * * * * * * * * * * * * Package Size (mm) Intensity IV (mcd) Typical Emitting Wavelength d (nm) p (nm) Min Typ. Red 100 300 630 644 Red 160 400 626 636 Red 250 500 613 623 Orange 250 500 605 612 Yellow 160 400 590 592 Red 63 150 630 644 Red 63 150 626 636 Red 160 260 613 623 Orange 160 270 605 612 Yellow 100 220 587 590 Green 63 150 571 574 Green 40 70 565 568 Green 16 35 558 562 Red 40 100 630 644 Red 3.5(L) x 2.8(W) x 1.9(H) 63 180 613 623 Orange 63 180 605 612 Yellow 63 150 587 590 Green 40 100 571 574 Fresh green 25 45 565 568 Fresh green 10 25 558 562 Green 100 350 528 523 Bluish green 160 300 505 496 468 Blue 63 100 470 Green 100 200 528 518 Blue 40 70 470 468 465 428 Blue 4 7 Ice blue 32 90 0.2/0.3 0.32/0.31 White 63 180 Ice blue 1000 1500 Green 400 700 528 518 Blue 200 300 470 468 1000 1600 0.31/0.30 1000 1600 0.345/0.35 White (Color temperature: 6500 K) White (Color temperature: 5000 K) 3.5(L) x 2.9(W) x 1.9(H) 800 1160 0.44/0.40 White (Color temperature: 6500 K) 1250 1700 0.31/0.30 White (Color temperature: 3000 K) 1000 1500 0.44/0.40 White (Color temperature: 3500 K) 1000 1500 Red 160 380 630 644 Red 160 380 626 636 Red 250 500 613 623 250 600 605 612 590 3.5(L) x 2.8(W) x 1.9(H) 250 450 587 Green 100 200 571 574 Red 630 1300 630 644 636 Red 3.5(L) x 2.9(W) x 1.9(H) Orange 630 1600 626 1000 2400 613 623 1000 2500 605 612 590 592 Yellow 1000 2200 White (Color temperature: 6500 K) 2000 3200 0.31/0.3 2000 3200 0.345/0.35 1600 2500 0.44/0.4 White (Color temperature: 5000 K) 3.5(L) x 2.9(W) x 1.9(H) White (Color temperature: 3000 K) : Dry-packed 20 120 10 Embossed tape Tape No.: T11 4-mm pitch 2000 pcs/reel 20 0.40/0.39 Yellow Red Packaging Specification 0.2/0.3 White (Color temperature: 3000 K) Orange Viewing Angle IF 2*1/2 () (mA) 50 50 40 *: New product : CIE1931 (chromaticity coordinate) (typ.) * Contact the Toshiba sales representative for information about RoHS compliance before you purchase any components. 9 2010/8 SCE0004J High Luminous Flux LED Lamps Part Number Source Color Package Size (mm) Min Typ. Optical Characteristics (Ta = 25C) Typical Forward Voltage Viewing Angle VF (V) Chromaticity 2*1/2 () Cx Cy Typ. Max 90 (Note1) 110 0.32 Luminous Flux F (Im) TL19W01-D(T32) ** White (Color temperature: 6500 K) TL19W01-N(T32) ** White (Color temperature: 5000 K) 3.8(L)x3.1(W)x0.55(H) 100 (Note1) 120 0.345 0.35 3.3 3.8 (Note2) ** White (Color temperature: 3000 K) 70 (Note1) 95 0.44 0.4 3.3 3.8 (Note2) TL12W03-D(T30) White (Color temperature: 6500 K) (Note3) 90 0.32 0.31 3.3 3.9 (Note2) TL12W03-N(T30) White (Color temperature: 5000 K) (Note3) 100 0.345 0.35 3.3 3.9 (Note2) TL12W03-L(T30) White (Color temperature: 3000 K) (Note3) 75 0.44 0.4 3.3 3.9 (Note2) TL12W02-D(T30) White (Color temperature: 6500 K) 90 0.32 0.31 6.8 7.9 TL12W02-N(T30) White (Color temperature: 5000 K) TL12W02-L(T30) TL12W01-D(T30) TL19W01-L(T32) 67.3 67.3 47.6 40 0.31 3.3 IF (mA) 3.8 (Note2) 135 300 40 90 0.345 0.35 6.8 7.9 White (Color temperature: 3000 K) 28 60 0.44 0.40 6.8 7.9 White (Color temperature: 6500 K) 20 40 0.32 0.31 3.4 4.0 TL12W01-L(T30) White (Color temperature: 3000 K) 14 30 0.44 0.40 3.4 4.0 TL12B01(T30) Blue 3.5 6 3.4 4.0 Embossed tape Tape No.: T32 8-mm pitch 500 pcs/reel 350 Embossed tape Tape No.: T30 8-mm pitch 500 pcs/reel 120 10.5(L) x 5.0(W) x 2.1(H) Packaging Specification 250 *d(nm) = Typ. 460 nm 100 : Dry-packed **: Under development : CIE1931 (chromaticity coordinate) Note 1: Min/max tolerance 10 % Note 2: Min/max tolerance 0.1 V Note 3: Min/max tolerance 20 % * Contact the Toshiba sales representative for information about RoHS compliance before you purchase any components. Middle Luminous Flux LED Lamps Part Number TL30W01-D(T36) Source Color Package Size (mm) White 4.5(L) x 2.0(W) x 0.8 (H) Luminous Flux F (Im) Min Typ. 15.1 (Note1) 19 Optical Characteristics (Ta = 25C) Typical Forward Voltage Chromaticity VF (V) Cx Cy Typ. Max 0.32 0.31 3.2 3.8(Note2) Viewing Angle 2*1/2 () IF (mA) 120 150 Packaging Specification Embossed tape Tape No.: T36 4-mm pitch 1000 pcs/reel : Dry-packed : CIE1931 (chromaticity coordinate) Note 1: Min/max tolerance 10 % Note 2: Min/max tolerance 0.05 V * Contact the Toshiba sales representative for information about RoHS compliance before you purchase any components. 10 2010/8 SCE0004J Photosensors Infrared LEDs and Visible LEDs for Sensor Light Sources Electrical/Optical Characteristics (Ta = 25C) Part Number with Rank Part Number Radiant Intensity Package Min (mW/sr) TLN108(F) TLN105B(F) TLN110(F) TO-18CAN with lens 10 50 940 8 12 50 950 23.5 Remote controls 5 15 50 940 8 Optoelectronic switches 50 950 21 Remote controls Fiberless optical transmissions, optoelectronic switches 5 15 19 5 35 50 870 16 5 46 50 870 13 5 14 50 870 5 4.9 14 50 870 21 4.9 14 50 870 13 20 945 30 Optoelectronic switches 50 870 18 Fiberless optical transmissions, optoelectronic switches 20 940 15 Optoelectronic switches TLN119(B,F) TLN117(F) TLN117(B,F) 3 2.5 10 4.2 10 40 3 TLN241 * 6-pin SMD 1.6(L) x 0.95(W) x 0.6(H) (PCB-mounted) Fiberless optical transmissions 2 2 7.5 5 18.7 15 20 612 4 Specifically designed for digital still cameras 11 30 850 78/87 Infrared lighting Small side-view package TLN117(C,F) Optoelectronic switches TLN238(F) TLOH9204 Applications 5 TLN119(F) Max (mW) TLN115A(B,F) TLN231(F) TLN233(F) TLN227(F) TLN225(F) TLN226(F) IF (mA) Min (mW) Peak Half-Value Emission Angle Wavelength () IF (mA) (nm) TLN115A(F) Max (mW/sr) Radiant Power : Dry-packed : Luminous intensity (cd) *: New product : Sample available Note: IF = forward current * Contact the Toshiba sales representative for information about RoHS compliance before you purchase any components. Phototransistors (for Optical Sensors) Part Number TPS601A(F) Part Number with Rank Package Min (A) 100 TPS601A(A,F) 100 300 200 600 TO-18CAN with lens TPS601A(B,F) TPS601A(C,F) TPS610(F) TPS611(F) TPS616(F) TPS622(F) Half-Value Angle () Impermeable Applications to Visible Light 0.1 0.2 30 800 10 400 1200 5 100 0.1 0.1 24 800 8 5 30 0.1 0.1 24 900 8 20 150 0.1 0.1 24 800 30 0.1 0.1 24 900 30 0.1 0.1 24 870 15 TPS615(F) Electrical/Optical Characteristics (Ta = 25C) Peak Light Current Dark Current Sensitive Wavelength Max Max 2 E (mW/cm ) VCE (V) (nm) (A) (A) TPS615(B,F) 34 85 60 150 TPS615(BC,F) 34 150 10 75 TPS616(B,F) 17 42.5 30 75 3 TPS615(C,F) 3 TPS616(C,F) TPS616(BC,F) 17 75 27 TPS622(A,F) TPS622(B,F) Small side-view package 27 80 55 165 Optoelectronic switches Note: E = radiant incidence; VCE = collector-emitter voltage * Contact the Toshiba sales representative for information about RoHS compliance before you purchase any components. 11 2010/8 SCE0004J Photodiodes Electrical/Optical Characteristics (Ta = 25C) Part Number Short-Circuit Current Package TPS703(F) TPS704(F) Side-view package Min (A) Dark Current Peak Sensitive Wavelength (nm) Half-Value Angle () Impermeable to Visible Light E (mW/cm ) Max (nA) VR (V) 0.9 0.1 30 10 960 65 0.5 0.1 30 10 1000 65 2 Applications Remote controls Note: E = radiant incidence; VR = reverse voltage * Contact the Toshiba sales representative for information about RoHS compliance before you purchase any components. Photo-ICs (Analog Output) Electrical/Optical Characteristics (Ta = 25C) Part Number Light Current Package Side-view package TPS820(B,F) TPS851(E TPS852(T)/ TPS852(K) TPS853(E TPS856(T)/ TPS856(K) TPS859(T)/ TPS859(K) Chip type Dark Current Part Number with Rank Min (A) Max (A) Ev (Ix) 1500 6000 37 74 TPS851(E,A 37 62 27 54 TPS852(A,T)/TPS852(A,K) 30 50 37 74 TPS853(E,A 42 70 40 80 44.1 73.7 TPS856(A,T)/TPS856(A,K) 160 320 TPS859(A,T)/TPS859(A,K) 180 300 Peak Impermea Half-Value Sensitive ble to Angle Wavelength Visible () (nm) Light VCC (V) Max (A) VCC (V) E = 0.1 mW/cm2 5 0.5 5 870 15 100 3 0.17 3.3 600 55 100 3 0.1 3.3 600 55 100 3 0.1 3.3 600 55 100 3 0.1 3 550 55 100 3 0.2 3 550 55 Applications Optoelectronic switches Ambient light sensor : Dry-packed Note 1: VCC = power supply voltage; EV: Illuminance; E = radiant incidence Note 2: (T) = For world wide except japan, (K) = For japan * The products shown in italic are manufactured by Toshiba semiconductor (Thailand) Co.,Ltd. * Contact the Toshiba sales representative for information about RoHS compliance before you purchase any components. 12 2010/8 SCE0004J Photointerrupters (Phototransistor Output) Absolute Maximum Ratings (Ta = 25C) Electrical Characteristics (Ta = 25C) Part Number with Rank Part Number TLP832(F) TLP833(F) TLP831(F) TLP830(F) TLP848(E) Gap (mm) Package 5 PWB direct mounting TLP848(R) Surface-mount, ultra-compact package Slit Width (mm) Current Transfer Ratio Min (%) Max (%) IF (mA) VCE (V) Collector-Emitter Voltage (V) 0.5 5 100 10 2 35 35 5 0.5 5 100 10 2 4.2 0.5 (Note 1) 5 100 10 2 35 2 0.15 3 20 10 2 35 1.2 0.3 3 24 5 2 15 1.2 0.3 4 20 5 2 15 Applications Printers, fax machines, copiers, image scanners, vending machines Cameras, cellular phones : Dry-packed Note: PWB = printed wiring board; IF = forward current; VCE = collector-emitter voltage Note 1: Horizontal slit * Contact the Toshiba sales representative for information about RoHS compliance before you purchase any components. Photointerrupters (with Connector) Electrical Characteristics (Ta = 25C) Part Number TLP1243(C8) Package Snap-in mounting Gap (mm) 5 Slit Width (mm) 0.7 Operating Supply Voltage (V) Output Type With Resistor VCE 35 V Connector Manufacturer Applications Tyco Electronics AMP K.K. Printers, copiers, fax machines, vending machines, FA equipment, amusement equipment Open-Collector Phototransistor output Note: VCE: collector-emitter voltage * Contact the Toshiba sales representative for information about RoHS compliance before you purchase any components. 13 2010/8 SCE0004J Photocouplers and Photorelays Transistor Output CTR Part Number Pin Configuration 6 Features Mini-flat MFSOP6 Low input drive current 1 6 1 5 1 Mini-flat MFSOP6 AC input Internal base connection 3 6 5 Mini-flat MFSOP6 General-purpose Internal base connection 4 1 Mini-flat MFSOP6 Low input drive current Internal base connection 3 6 4 Mini-flat MFSOP6 AC input SEMKO-approved TST part recommended (4) 1 3 6 4 Mini-flat MFSOP6 General-purpose High CTR SEMKO-approved TST part recommended (4) 1 3 4 TLP280 3 SOP4 Lead pitch: 1.27 mm AC input SEMKO-approved TST part recommended (4) 2 1 16 15 14 13 12 11 10 9 TLP280-4 1 2 3 4 4 TLP281 5 6 7 8 3 2 1 13 12 11 10 2 3 200 1200 1/0.5 c-UL 1/0.5 5/5 TUV VDE BSI IEC 4 100 50 GB 100 50 GB 100 1200 1/0.5 600 5/5 600 5/5 5 6 7 80 80 100 BV 200 1200 50 Y 50 150 GR 100 300 BL 200 (2) (2) GB 100 (2) (2) (2) (2) (2) (2) 3750 600 600 50 GB 100 Y 50 150 GR 100 300 BL 200 600 600 YH 75 150 GRL 100 200 GRH 150 300 50 600 Y 50 150 GR 100 300 BL 200 GB 100 50 GB 100 80 5/5 600 5/5 80 2500 5/5 80 2500 600 50 GB 100 600 Y 50 150 GR 100 300 600 BL 200 YH 75 150 GRL 100 200 GRH 150 300 BLL 200 400 50 GB 100 9 TLP281-4 1 SOP16 4-channel version of the TLP280 Lead pitch: 1.27 mm AC input SEMKO-approved SOP4 Lead pitch: 1.27 mm General-purpose SEMKO-approved TST part recommended (4) 16 15 14 BV UL (1) 4 TLP130 TLP181 100 @IF / VCE (mA) (V) Safety Standards 80 Mini-flat MFSOP6 AC input Low input drive current 3 6 TLP180 Max (%) 3 4 TLP126 TLP137 Min (%) BVs 1 Minute (Vrms) 4 TLP124 TLP131 Rank VCEO (V) 8 SOP16 4-channel version of the TLP281 Lead pitch: 1.27 mm SEMKO-approved 600 Note (1): Legend in the Safety Standards column: BSI and IEC : Approved (supplementary or basic insulation) : Approved (reinforced insulation) : Design which meets safety standard/approval pending as of April 2010 BSIEN 60065 / EN 60950 IEC IEC 60065 / IEC 60950 TUV and VDE: Approved : Design which meets safety standard/approval pending as of April 2010 EN 60747-5-2-approved with optionV4 or D4 Note (2): The EN60747-5-2 safety standard for compact packages is different from that for standard DIP packages. Since the mini-flat package is a compact package, please contact your nearest Toshiba sales representative for more details. Note (3): The products with the ranks Y and BL are limited in production. For details, please contact your nearest Toshiba sales representative. Note (4): Product manufactured by Toshiba Semiconductor (Thailand) Co., Ltd. [TST] is recommended. See page 169 to 171 for detail. Japan product is non-promotional item. * The pin configuration diagrams only show the general configurations of the circuits. * Contact the Toshiba sales representative for information about RoHS compliance before you purchase any components. 14 2010/8 SCE0004J CTR Part Number Pin Configuration 4 TLP284 Features SOP4 Lead pitch: 1.27 mm AC input General-purposeHigh BVs Creepage distance: 5.0 mm (min) TST part recommended 3 (4) 2 1 16 15 14 13 12 11 10 9 TLP284-4 1 2 3 4 5 4 TLP285 6 7 8 SOP4 Lead pitch: 1.27 mm General-purposeHigh BVs Creepage distance: 5.0 mm (min) TST part recommended 3 (4) 2 1 16 15 14 13 12 11 10 9 TLP285-4 1 2 3 4 5 4 6 7 8 1 2 7 6 2 3 10 3 6 4 5 5 150 GR 100 300 BL 200 GB 100 c-UL TUV VDE BSI IEC (2) (2) (2) (2) 600 5/5 GB 50 100 50 GB 100 80 3750 600 600 600 Y 50 150 GR 100 300 BL 200 600 YH 75 150 200 GRL 100 GRH 150 300 BLL 200 400 50 600 GB 100 600 20 80 100/1 55 5000 80 100/1 55 5000 1200 1/0.5 55 5000 5/5 80 3750 DIP4 High input current AC input IF = 150 mA DIP8 Dual channel version of the TLP320 DIP16 4-channel version of the TLP320 6 7 DIP6 High input current AC input IF = 150 mA 20 100 BV 200 100 BV 200 8 4 TLP330 1 2 3 6 5 4 DIP6 Low input drive current Internal base connection TLP331 1 2 3 6 5 4 DIP6 Low input drive current No internal base connection TLP332 1 600 50 UL 9 TLP320-4 2 50 Y (1) 4 16 15 14 13 12 11 1 @IF / VCE (mA) (V) Safety Standards 5 TLP320-2 1 SOP16 4-channel version of the TLP285 Lead pitch: 1.27 mm General-purposeHigh BVs Creepage distance: 5.0 mm (min) Max (%) BVs 1 Minute (Vrms) 3 TLP320 8 SOP16 4-channel version of the TLP284 Lead pitch: 1.27 mm AC input General-purposeHigh BVs Creepage distance: 5.0 mm (min) Min (%) Rank VCEO (V) 2 3 Note (1): Legend in the Safety Standards column: BSI and IEC: Approved (supplementary or basic insulation) : Approved (reinforced insulation) : Design which meets safety standard/approval pending as of April 2010 BSIEN 60065 / EN 60950 IEC IEC 60065 / IEC 60950 TUV and VDE: Approved : Design which meets safety standard/approval pending as of April 2010 EN 60747-5-2-approved with optionV4 or D4 Note (2): The EN60747-5-2 safety standard for compact packages is different from that for standard DIP packages. Since the mini-flat package is a compact package, please contact your nearest Toshiba sales representative for more details. Note (3): The products with the ranks Y and BL are limited in production. For details, please contact your nearest Toshiba sales representative. Note (4): Product manufactured by Toshiba Semiconductor (Thailand) Co., Ltd. [TST] is recommended. See page 169 to 171 for detail. Japan product is non-promotional item. * The pin configuration diagrams only show the general configurations of the circuits. * Contact the Toshiba sales representative for information about RoHS compliance before you purchase any components. 15 2010/8 SCE0004J Transistor Output (Continued) CTR Part Number Pin Configuration 8 7 6 Features 2 3 4 3 (4) 1 2 7 6 2 16 15 14 DIP8 Dual -channel version of the TLP521-1 TST part recommended 3 13 12 4 11 10 DIP16 4-channel version of the TLP521-1 1 2 3 4 6 5 5 6 7 (3) 1 2 3 6 5 4 DIP6 General-purpose High EMI immunity No internal base connection (3) 2 4 3 DIP4 AC input SEMKO-approved TST part recommended 1 2 7 6 5 DIP8 Dual channel version of the TLP620 SEMKO-approved TST part recommended (4) 1 16 3 2 15 14 13 12 4 11 10 DIP16 4-channel version of the TLP620 2 3 4 4 TLP621 TLP621F 6 7 8 DIP4 High isolation voltage UL-approved (double protection) SEMKO-approved TST part recommended 3 1 TLP621-2 5 (4) 8 2 7 6 5 DIP8 Dual channel version of the TLP621 SEMKO-approved TST part recommended (4) 1 2 16 15 14 3 13 12 4 11 10 9 DIP16 4-channel version of the TLP621 TLP621-4 1 2 3 55 2500 5/5 55 2500 5/5 55 2500 5/5 55 5000 5/5 55 5000 TUV VDE BSI IEC 50 600 GB 100 600 150 Y 50 GR 100 300 BL 200 600 50 600 GB 100 50 GB 100 600 50 GB 100 BL 200 GR 100 300 Y 50 150 50 GB 100 BL 200 GR 100 300 Y 50 150 50 GB 100 50 600 600 4 5 6 7 600 GB 100 50 GB 100 9 TLP620-4 1 5/5 c-UL 3 (4) 8 600 UL 8 4 DIP6 General-purpose Internal base connection 1 TLP620-2 100 @IF / VCE (mA) (V) 9 TLP521-4 TLP620 TLP620F GB Max (%) (1) 5 (4) 1 TLP532 50 Safety Standards 4 DIP4 General-purpose TST part recommended 8 TLP531 DIP6 General-purpose 1 TLP521-2 Min (%) BVs 1 Minute (Vrms) 5 TLP504A TLP521-1 Rank VCEO (V) 8 50 600 GB 100 600 Y 50 150 GR 100 300 BL 200 600 50 600 GB 100 50 GB 100 BV 200 600 Note (1): Legend in the Safety Standards column: BSI and IEC : Approved (supplementary or basic insulation) : Approved (reinforced insulation) : Design which meets safety standard/approval pending as of April 2010 BSIEN 60065 / EN 60950 IEC IEC 60065 / IEC 60950 TUV and VDE: Approved : Design which meets safety standard/approval pending as of April 2010 EN 60747-5-2-approved with optionV4 or D4 Note (3): The products with the ranks Y and BL are limited in production. For details, please contact your nearest Toshiba sales representative. Note (4): Product manufactured by Toshiba Semiconductor (Thailand) Co., Ltd. [TST] is recommended. See page 169 to 171 for detail. Japan product is non-promotional item. * The pin configuration diagrams only show the general configurations of the circuits. * Contact the Toshiba sales representative for information about RoHS compliance before you purchase any components. 16 2010/8 SCE0004J CTR Part Number Pin Configuration 4 Features Rank Min (%) 100 BV 200 100 VCEO (V) Safety Standards BVs 1 Minute (Vrms) UL Max (%) @IF / VCE (mA) (V) 1200 1/0.5 55 5000 1200 1/0.5 55 1200 1/0.5 600 80 (1) TUV VDE BSI IEC 5000 55 5000 5/5 350 5000 100/1 55 5000 c-UL 3 DIP4 Low input drive current TLP624 8 1 2 7 6 5 DIP8 Dual channel version of the TLP624 TLP624-2 1 2 16 15 14 3 13 12 10 3 4 4 5 6 7 8 DIP4 Low input drive current AC input 1 2 7 6 DIP8 Dual channel version of the TLP626 16 2 15 14 3 13 12 11 10 3 4 4 5 6 7 8 DIP4 High VCEO VCEO = 350 V 1 2 7 6 DIP8 Dual channel version of the TLP628 1 2 3 13 12 4 11 10 TLP628-4 2 3 4 4 5 1 7 6 7 8 2 6 BV 200 100 BV 200 50 GB 100 50 GB 100 50 GB 100 20 5 DIP8 Dual channel version of the TLP629 1 100 DIP4 High input current IF = 150 mA (max) DC input TLP629-2 2 16 15 14 3 TLP629 8 200 9 DIP16 4-channel version of the TLP628 1 BV 5 TLP628-2 16 15 14 100 3 TLP628 8 9 TLP626-4 2 200 4 DIP16 4-channel version of the TLP626 1 BV 5 TLP626-2 1 100 3 TLP626 8 9 DIP16 4-channel version of the TLP624 2 200 4 11 TLP624-4 1 BV 3 13 12 4 11 10 9 DIP16 4-channel version of the TLP629 TLP629-4 1 2 3 4 5 6 7 8 Note (1): Legend in the Safety Standards column: BSI and IEC: Approved (supplementary or basic insulation) : Approved (reinforced insulation) : Design which meets safety standard/approval pending as of April 2010 BSIEN 60065 / EN 60950 IEC IEC 60065 / IEC 60950 TUV and VDE: Approved : Design which meets safety standard/approval pending as of April 2010 EN 60747-5-2-approved with optionV4 or D4 * The pin configuration diagrams only show the general configurations of the circuits. * Contact the Toshiba sales representative for information about RoHS compliance before you purchase any components. 17 2010/8 SCE0004J Transistor Output (Continued) CTR Part Number Pin Configuration 6 5 DIP6 AC input High isolation voltage 1 2 3 6 5 4 DIP6 General-purpose Internal base connection TLP631 1 2 3 6 5 4 TLP632 1 2 3 6 5 4 DIP6 General-purpose High EMI immunity No internal base connection DIP6 SEMKO-approved Internal base connection TLP731 1 2 3 6 5 4 TLP732 1 2 3 6 5 4 DIP6 SEMKO-approved No internal base connection DIP6 SEMKO-approved Internal base connection TLP733 TLP733F 1 2 3 6 5 4 TLP734 TLP734F 1 2 4 3 3 (5) (5) 1 Rank Min (%) 50 GB 100 50 GB 100 GR 100 50 GB 100 GR 100 50 GB 100 GR 100 50 GB 100 GR 100 50 GB 100 GR 100 50 GB 100 GR 100 VCEO (V) BVs 1 Minute (Vrms) UL Safety Standards Max (%) @IF / VCE (mA) (V) 600 5/5 55 5000 5/5 55 5000 5/5 55 4000 5/5 55 5/5 80 c-UL (1) TUV VDE BSI IEC 4000 5000 4 TLP630 TLP781 TLP781F Features 2 DIP6 SEMKO-approved No internal base connection DIP4 High isolation voltage UL-approved (double protection) SEMKO-approved 600 300 600 300 600 300 600 300 600 300 600 300 50 600 Y 50 150 GR 100 300 BL 200 GB 100 YH 75 600 150 GRL 100 200 GRH 150 300 BLL 200 400 Note (1): Legend in the Safety Standards column: BSI and IEC: Approved (supplementary or basic insulation) : Approved (reinforced insulation) : Design which meets safety standard/approval pending as of April 2010 BSIEN 60065 / EN 60950 IEC IEC 60065 / IEC 60950 TUV and VDE : Approved : Design which meets safety standard/approval pending as of April 2010 EN 60747-5-2-approved with optionV4 or D4 Note (5): For details of the TLP781 and TLP781F, please contact your nearest Toshiba sales representative. * The pin configuration diagrams only show the general configurations of the circuits. * Contact the Toshiba sales representative for information about RoHS compliance before you purchase any components. 18 2010/8 SCE0004J Darlington Transistor Output CTR Part Number Pin Configuration 6 VCE(sat) Features VCEO (V) Safety Standards BVs 1 Minute (Vrms) UL c-UL TUV VDE (2) Min (%) @IF / VCE (mA) (V) Max (V) @IC / IF (mA) 1000 1/1 1.2 100/10 300 2500 1000 1/1 1.2 100/10 300 5000 1000 1/1 1.2 100/10 300 5000 500 1/1 1.0 50/10 55 2500 1000 1/1 1.2 100/10 35 2500 (1) BSI IEC 4 Mini-flat MFSOP6 High VCEO TLP127 1 (2) 3 5 6 4 DIP6 High VCEO SEMKO-approved TLP371 1 2 3 6 5 4 DIP6 High VCEO No internal base connection TLP372 1 2 3 6 4 DIP6 High VCEO Long emitter-collector distance TLP373 1 2 3 4 3 DIP4 General-purpose TLP523 8 1 2 7 6 5 DIP8 Dual channel version of the TLP523 TLP523-2 1 2 3 16 15 14 13 12 4 11 10 9 DIP16 4-channel version of the TLP523 TLP523-4 1 2 3 6 4 5 5 6 7 8 4 DIP6 General-purpose High EMI immunity TLP570 1 2 3 6 5 4 DIP6 General-purpose Internal base connection TLP571 1 2 3 Note (1): Legend in the Safety Standards column: BSI and IEC: Approved (supplementary or basic insulation) : Approved (reinforced insulation) : Design which meets safety standard/approval pending as of April 2010 BSIEN 60065 / EN 60950 IEC IEC 60065 / IEC 60950 TUV and VDE: Approved : Design which meets safety standard/approval pending as of April 2010 EN 60747-5-2-approved with optionV4 or D4 Note (2): The EN60747-5-2 safety standard for compact packages is different from that for standard DIP packages. Since the mini-flat package is a compact package, please contact your nearest Toshiba sales representative for more details. * The pin configuration diagrams only show the general configurations of the circuits. * Contact the Toshiba sales representative for information about RoHS compliance before you purchase any components. 19 2010/8 SCE0004J Darlington Transistor Output (Continued) CTR Part Number Pin Configuration 5 6 DIP6 General-purpose Built-in RBE 1 TLP627-2 @IF / VCE (mA) (V) Max (V) @IC / IF (mA) 1000 1/1.2 1.2 100/10 55 2500 1000 1/1 1.2 100/10 300 5000 c-UL TUV VDE BSI IEC DIP4 High VCEO SEMKO-approved TST part recommended 2 6 7 5 DIP8 Dual channel version of the TLP627 SEMKO-approved TST part recommended (4) 1 UL Min (%) (1) 3 (4) 8 Safety Standards BVs 1 Minute (Vrms) 3 2 4 TLP627 VCEO (V) 4 TLP572 1 VCE(sat) Features 2 3 16 15 14 13 12 4 11 10 9 DIP16 4-channel version of the TLP627 TLP627-4 1 2 3 4 5 6 7 8 Note (1): Legend in the Safety Standards column: BSI and IEC : Approved (supplementary or basic insulation) : Approved (reinforced insulation) : Design which meets safety standard/approval pending as of April 2010 BSIEN 60065 / EN 60950 IEC IEC 60065 / IEC 60950 TUV and VDE: Approved : Design which meets safety standard/approval pending as of April 2010 EN 60747-5-2-approved with optionV4 or D4 Note (4): Product manufactured by Toshiba Semiconductor (Thailand) Co., Ltd. [TST] is recommended. See page 169 to 171 for detail. Japan product is non-promotional item. * The pin configuration diagrams only show the general configurations of the circuits. * Contact the Toshiba sales representative for information about RoHS compliance before you purchase any components. 20 2010/8 SCE0004J Thyristor Output Part Number Pin Configuration 6 1 Mini-flat MFSOP6 General-purpose 10 1.45 100 400 DIP6 General-purpose Low trigger current 7 1.45 100 600 DIP8 Long anode-cathode distance (SCR) 7 1.45 100 600 DIP6 SEMKO-approved 10 1.45 100 600 Safety Standards UL c-UL TUV (1) VDE BSI IEC 4 5 TLP548J 1 2 5 TLP549J 3 2 5 4 4 TLP748J TLP748JF 2 2500 3 6 7 1 @ITM (mA) BVs 1 Minute (Vrms) 3 6 6 Max (V) Peak On-State Voltage, VTM 4 5 TLP148G 1 Max (mA) Off-State Output Terminal Voltage VDRM (V) Features Trigger LED Current, IFT 4000 3 Note (1): Legend in the Safety Standards column: BSI and IEC: Approved (supplementary or basic insulation) : Approved (reinforced insulation) : Design which meets safety standard/approval pending as of April 2010 BSIEN 60065 / EN 60950 IEC IEC 60065 / IEC 60950 TUV and VDE : Approved : Design which meets safety standard/approval pending as of April 2010 EN 60747-5-2-approved with optionV4 or D4 * The pin configuration diagrams only show the general configurations of the circuits. * Contact the Toshiba sales representative for information about RoHS compliance before you purchase any components. 21 2010/8 SCE0004J Triac Output Trigger LED Current, IFT Part Number Pin Configuration Features Rank 6 4 TLP160G Mini-flat MFSOP6 Non-zero cross TLP165J TLP160J 1 3 TLP161G Mini-flat MFSOP6 Zero cross TLP166J TLP161J 6 TLP163J 1 3 TLP168J Off-State Output Terminal Max (mA) Max (V) @ITM (mA) Voltage VDRM (V) 10 IFT7 7 IFT5 5 10 IFT7 7 10 IFT7 7 IFT5 5 TLP260J 1 6 ZC 1 4 1 2 4 3 1 2 4 3 1 2 7 6 600 400 70 (2) (2) (2) (2) (2) (2) (2) (2) (2) (2) IEC (2) 2500 (2) 70 7 Mini-flat MFSOP6 Zero cross High impulse noise immunity VN = 2000 V (typ.) 10 100 Mini-flat MFSOP6 Zero cross 3 70 Mini-flat MFSOP6 Non-zero cross 10 2.8 70 600 3000 Mini-flat MFSOP6 Zero cross 10 2.8 70 600 3000 (2) 10 3.0 100 600 5000 IFT7 7 3.0 100 600 5000 3.0 100 400 2500 2500 2.8 600 (2) 3 2 16 15 14 13 12 5 10 7 DIP4 Zero cross High impulse noise immunity VN = 2000 V (typ.) 10 DIP4 10 DIP8 Dual channel version of the TLP525G 10 DIP16 4-channel version of the TLP525G 10 4 11 10 9 TLP525G-4 4 IFT7 5 TLP525G-2 3 10 DIP4 Zero cross TLP525G 2 BSI 3 ZC 1 VDE DIP4 Non-zero cross 1 TUV 3 TLP360J TLP360JF 8 c-UL (1) 3 4 TLP261J TLP363J TLP363JF UL 400 2.8 Safety Standards 4 6 TLP361J TLP361JF BVs 1 Minute (Vrms) IFT7 4 ZC Peak On-State Voltage, VTM 6 7 8 Note (1): Legend in the Safety Standards column: BSI and IEC: Approved (supplementary or basic insulation) : Approved (reinforced insulation) : Design which meets safety standard/approval pending as of April 2010 BSIEN 60065 / EN 60950 IEC IEC 60065 / IEC 60950 TUV and VDE : Approved : Design which meets safety standard/approval pending as of April 2010 EN 60747-5-2-approved with optionV4 or D4 Note (2): The EN60747-5-2 safety standard for compact packages is different from that for standard DIP packages. Since the mini-flat package is a compact package, please contact your nearest Toshiba sales representative for more details. * The pin configuration diagrams only show the general configurations of the circuits. * Contact the Toshiba sales representative for information about RoHS compliance before you purchase any components. 22 2010/8 SCE0004J Part Number Pin Configuration 6 4 TLP560G TLP560J DIP6 General-purpose Non zero cross 1 2 6 3 4 TLP561G ZC TLP561J TLP3022(S) TLP3022F(S) TLP3023(S) TLP3023F(S) TLP3052(S) TLP3052F(S) 1 2 6 1 4 2 3 DIP6 SEMKO-approved Non-zero cross DIP6 High VDRM SEMKO-approved Non-zero cross 4 1 2 3 TLP3762(S) TLP3762F(S) TLP3782(S) TLP3782F(S) TLP3783(S) TLP3783F(S) 2 6 IFT7 7 IFT5 5 10 IFT7 7 10 IFT7 7 IFT5 5 10 IFT7 7 10 5 Max (V) @ITM (mA) 3.0 100 UL (1) c-UL TUV VDE BSI IEC 400 600 2500 400 3.0 100 600 400 3.0 100 5000 10 5 10 5 DIP6 SEMKO-approved Zero cross 3 DIP6 Zero cross 10 800 DIP6 Zero cross High impulse noise immunity VN = 2000 V (typ.) 10 600 10 600 400 600 3.0 100 5000 800 5 DIP6 SEMKO-approved Non zero cross 10 3.0 100 600 4000 DIP6 SEMKO-approved Zero cross 10 3.0 100 600 4000 3 4 TLP763J TLP763JF ZC 1 10 Safety Standards 4 TLP762J TLP762JF 1 Max (mA) BVs Off-State Output Terminal Voltage 1 Minute VDRM (V) (Vrms) DIP6 High impulse noise immunity VN = 1500 V (typ.) 6 Rank Peak On-State Voltage, VTM 10 DIP6 SEMKO-approved High VDRM Zero cross 6 Trigger LED Current, IFT DIP6 SEMKO-approved Zero cross ZC TLP3082(S) TLP3082F(S) DIP6 General-purpose Zero cross 3 TLP3042(S) TLP3042F(S) TLP3043(S) TLP3043F(S) TLP3062(S) TLP3062F(S) TLP3063(S) TLP3063F(S) TLP3064(S) TLP3064F(S) Features 2 3 Note (1): Legend in the Safety Standards column: BSI and IEC: Approved (supplementary or basic insulation) : Approved (reinforced insulation) : Design which meets safety standard/approval pending as of April 2010 BSIEN 60065 / EN 60950 IEC IEC 60065 / IEC 60950 TUV and VDE : Approved : Design which meets safety standard/approval pending as of April 2010 EN 60747-5-2-approved with optionV4 or D4 * The pin configuration diagrams only show the general configurations of the circuits. * Contact the Toshiba sales representative for information about RoHS compliance before you purchase any components. 23 2010/8 SCE0004J IC Output Part Number Pin Configuration 8 7 6 Features Data Rate (Typ. @NRZ) Safety Standards UL c-UL TUV VDE (1) BSI IEC 7% min DIP8 JEDEC-compliant 2 3 4 7 6 5 6N137 1 2 7 8 3 6 3 2 5 DIP8 JEDEC-compliant High-speed 10M bit/s DIP8 JEDEC-compliant High CTR 300k bit/s 400% min 0.5 Propagation delay time 550 ns (max) Open-collector output (Inverter logic) IFHL = 5 (max) IFLH = 1.6 (max) (2) 4 GND SHIELD Vcc 1 Mini-flat MFSOP6 5M bit/s Totempole output (Buffer logic) (2) (2) (2) (2) 3750 3 5 4 SHIELD 1 1.6 3 5 TLP105 6 300% min 2500 4 SO6 (reinforced insulation) Topr (max) 125C 1 5 4 TLP104 6 700% typ. 5 6N139 6 16 4 6N138 1 1M bit/s 19% min GND 1 8 Vcc 6N136 TLP109(IGM) @IF(IN) (mA) BVs 1 Minute (Vrms) 5 6N135 TLP109 Output/CTR 3 SO6 (reinforced insulation) Creepage/clearance 5 mm Intermal isoration thickness 0.4 mm 1M bit/s 20% min 16 Propagation delay time 0.8 s (max) 25% min 10 (2) Note (1): Legend in the Safety Standards column: BSI and IEC : Approved (supplementary or basic insulation) : Approved (reinforced insulation) : Design which meets safety standard/approval pending as of April 2010 BSIEN 60065 / EN 60950 IEC IEC 60065 / IEC 60950 TUV and VDE: Approved : Design which meets safety standard/approval pending as of April 2010 EN 60747-5-2-approved with optionV4 or D4 Note (2): The EN60747-5-2 safety standard for compact packages is different from that for standard DIP packages. Since the mini-flat package is a compact package, please contact your nearest Toshiba sales representative for more details. * The pin configuration diagrams only show the general configurations of the circuits. * Contact the Toshiba sales representative for information about RoHS compliance before you purchase any components. 24 2010/8 SCE0004J Part Number Pin Configuration 6 GND SHIELD Vcc 1 SO6 (reinforced insulation) Ultra-high-speed (20M Bd) Totempole output (Inverter logic) 4 GND SHIELD Vcc 5 TLP117 1 @IF(IN) (mA) BVs 1 Minute (Vrms) Safety Standards UL c-UL TUV VDE (2) (2) (2) (1) BSI IEC Mini-flat MFSOP6 Ultra-high-speed (50M Bd) 50M Bd SO6 (reinforced insulation) Topr (max) 125C Ultra-high-speed 20M Bd SO6 (reinforced insulation) Topr (max) 125C Direct drive of a small power IGBT/MOSFET DIP8 Direct drive of a mediumpower IGBT/MOSFET Low power dissipation IFHL = 5 (max) (2) 3 6 5 Vcc GND SHIELD 4 1 Open-collector output (Inverter logic) IFHL = 5 (max) Propagation delay time 0.7 s (max) Output current: 0.6 A (max) IFHL = 5 (max) Propagation delay time 0.5 s (max) Peak output current: 2.5 A (max) IFLH = 5 (max) (2) 3 6 4 5 TLP151 1 8 Output/CTR 20M Bd 3 6 TLP350 TLP350F Data Rate (Typ. @NRZ) 4 5 TLP116A TLP118 Features (2) 3 7 6 5 3750 TLP350H TLP350HF TLP351 TLP351F TLP351H TLP351HF TLP358 TLP358F TLP358H TLP358HF 1 8 1 8 1 2 7 2 7 2 3 6 3 6 3 4 5 4 5 4 DIP8 Direct drive of a mediumpower IGBT/MOSFET Low power dissipation Topr (max) 125C Propagation delay time 0.5 s (max) Peak output current: 2.5 A (max) IFLH = 5 (max) DIP8 Direct drive of a small power IGBT/MOSFET Low power dissipation Propagation delay time 0.7 s (max) Peak output current: 0.6 A (max) IFLH = 5 (max) DIP8 Direct drive of a small power IGBT/MOSFET Low power dissipation Topr (max) 125C Propagation delay time 0.7 s (max) Peak output current: 0.6 A (max) IFLH = 5 (max) DIP8 Direct drive of a mediumpower IGBT/MOSFET Low power dissipation Propagation delay time 0.5 s (max) Peak output current: 6 A (max) IFLH = 5 (max) DIP8 Direct drive of a mediumpower IGBT/MOSFET Low power dissipation Topr (max) 125C Propagation delay time 0.5 s (max) Peak output current: 6 A (max) IFLH = 5 (max) Note (1): Legend in the Safety Standards column: BSI and IEC : Approved (supplementary or basic insulation) : Approved (reinforced insulation) : Design which meets safety standard/approval pending as of April 2010 BSIEN 60065 / EN 60950 IEC IEC 60065 / IEC 60950 TUV and VDE: Approved : Design which meets safety standard/approval pending as of April 2010 EN 60747-5-2-approved with optionV4 or D4 Note (2): The EN60747-5-2 safety standard for compact packages is different from that for standard DIP packages. Since the mini-flat package is a compact package, please contact your nearest Toshiba sales representative for more details. * The pin configuration diagrams only show the general configurations of the circuits. * Contact the Toshiba sales representative for information about RoHS compliance before you purchase any components. 25 2010/8 SCE0004J IC Output (Continued) Part Number Pin Configuration 6 Features DIP6 6-pin package version of the TLP550 TLP512 7 2 7 3 6 3 6 Vcc 2 7 3 6 3 6 Vcc SHIELD TLP554 3 6 4 5 GND 2 7 SHIELD Vcc 1 8 TLP555 1 8 2 7 DIP6 6-pin package version of the TLP552 10M bit/s DIP8 No internal base connection High CMR 1M bit/s 3 6 DIP8 Internal base connection 1M bit/s DIP8 High-speed 10M bit/s Vcc SHIELD 2 Open-collector output (Inverter logic) IFHL = 5 (max) 3 16 16 Open-collector output (Inverter logic) IFHL = 5 (max) 2500 DIP8 Low input drive current 300k bit/s 400% min DIP8 High-speed High CMR version of the TLP552 10M bit/s DIP8 Low input current High VCC operation 5M bit/s 4 5 GND 3 6 TLP558 1 IEC 0.5 Open-collector (Inverter logic) IFHL = 5 (max) 3-state output (Buffer logic) IFLH = 1.6 (max) IFLH = 5 (max) IFHL = 1.6 (max) 4 5 TLP557 2 7 BSI 16 10% min (19% (min) for rank O) DIP8 Direct drive of a power transistor 1 8 VDE 4 5 GND 2 7 20% min 4 5 TLP553 1 8 TUV 4 5 TLP552 1 8 1M bit/s 4 5 GND 2 7 c-UL 5 TLP551 1 8 UL (1) 3 6 TLP550 1 8 Safety Standards GND Vcc 2 1 @IF(IN) (mA) BVs 1 Minute (Vrms) 3 4 2 5 TLP513 8 Output/CTR 4 5 1 6 Data Rate (Typ. @NRZ) DIP8 Inverted logic version of the TLP555 Propagation delay time 5 s (max) 5M bit/s Constant current output: 0.25 A 3-state output (Inverter logic) 4 Note (1): Legend in the Safety Standards column: BSI and IEC: Approved (supplementary or basic insulation) : Approved (reinforced insulation) : Design which meets safety standard/approval pending as of April 2010 BSIEN 60065 / EN 60950 IEC IEC 60065 / IEC 60950 TUV and VDE : Approved : Design which meets safety standard/approval pending as of April 2010 EN 60747-5-2-approved with optionV4 or D4 * The pin configuration diagrams only show the general configurations of the circuits. * Contact the Toshiba sales representative for information about RoHS compliance before you purchase any components. 26 2010/8 SCE0004J Part Number Pin Configuration 8 6 7 5 SHIELD TLP559 Features TLP559(IGM) 1 2 3 4 8 7 6 5 DIP8 High isolation voltage Internal base connection TLP651 1 2 TLP700 TLP700F 6 TLP700H TLP700HF 1 3 5 2 6 5 4 3 4 ** 1 2 3 TLP701H TLP701HF 6 5 4 TLP705 TLP705F 2 5 Vcc TLP708 1 2 3 5 4 ** ** 1 2 3 6 5 4 1 GND SHIELD TLP715 TLP715F 3 6 Vcc TLP714 TLP714F 2 @IF(IN) (mA) Safety Standards BVs 1 Minute (Vrms) UL c-UL 2500 1M bit/s 20% min 16 Propagation delay time 0.8 s (max) 25% min 10 10% min (19% (min) for rank O) 16 1M bit/s TUV VDE (1) BSI IEC SDIP6 Direct drive of a mediumpower IGBT/MOSFET Low power dissipation SDIP version of the TLP350 Propagation delay time 0.5 s (max) Output current: 2.0 A (max) IFLH = 5 (max) SDIP6 Direct drive of a mediumpower IGBT/MOSFET Low power dissipation Topr (max) 125C SDIP version of the TLP350 Propagation delay time 0.5 s (max) Peak output current: 2.0 A (max) IFLH = 5 (max) SDIP6 Direct drive of a small-power IGBT/MOSFET Low power dissipation SDIP version of the TLP351 Propagation delay time 0.7 s (max) Output current: 0.6 A (max) IFLH = 5 (max) SDIP6 Direct drive of a small-power IGBT/MOSFET Low power dissipation Propagation delay time 0.7 s (max) Peak output current: 0.6 A (max) IFHL=5 (max) SDIP6 Direct drive of a small-power IGBT/MOSFET Low power dissipation Topr (max) 125C SDIP version of the TLP351 Propagation delay time 0.7 s (max) Peak output current: 0.6 A (max) IFLH = 5 (max) SDIP6 Direct drive of a small-power IGBT/MOSFET High speed Low power dissipation Propagation delay time 0.2 s (max) Output current: 0.45 A (max) IFLH = 8 (max) SDIP6 Topr (max) 125C High speed SDIP version of the TLP118 20 MBd Open-collector output (Inverter logic) IFHL = 5 (max) SDIP6 SDIP version of the TLP104 Propagation delay time 550 ns (max) Open-collector output (Inverter logic) IFHL=5 (max) SDIP6 Direct drive of an IPM High CMR Propagation delay time 250 ns (max) Totempole output (Buffer logic) IFLH = 3 (max) 5000 4 GND SHIELD 1 6 Output/CTR 4 TLP701 TLP701F TLP701E DIP8 High CMR version of the TLP550 No internal base connection Data Rate (Typ. @NRZ) 3 Note (1): Legend in the Safety Standards column: BSI and IEC: Approved (supplementary or basic insulation) : Approved (reinforced insulation) : Design which meets safety standard/approval pending as of April 2010 BSIEN 60065 / EN 60950 IEC IEC 60065 / IEC 60950 TUV and VDE : Approved : Design which meets safety standard/approval pending as of April 2010 EN 60747-5-2-approved with optionV4 or D4 ** Under development: Specifications subject to change without notice. For the latest information, please contact your nearest Toshiba sales representative. * The pin configuration diagrams only show the general configurations of the circuits. * Contact the Toshiba sales representative for information about RoHS compliance before you purchase any components. 27 2010/8 SCE0004J IC Output (Continued) Part Number Pin Configuration 6 GND SHIELD Vcc 1 2 3 6 5 4 SDIP6 High-speed SDIP version of the TLP116 GND SHIELD TLP718 TLP718F 1 2 3 6 5 4 SDIP6 Direct drive of an IPM High CMR SHIELD TLP719 TLP719F 1 8 6 1 2 3 4 8 7 6 5 TLP751 TLP751F TLP754 2 3 6 7 4 1 2 3 4 8 7 6 5 SHIELD 3 2 5 TLP2066 1 1 Vcc TLP2098 1 VDE BSI IEC 15 MBd Totempole output (Inverter logic) IFHL = 6.5 (max) Propagation delay time 250 ns (max) Totempole output (Inverter logic) IFHL = 3 (max) 1M bit/s 20% min 16 DIP8 High isolation voltage High CMR SEMKO-approved 1M bit/s 10% min (19% (min) for rank O) 16 DIP8 High isolation voltage Internal base connection SEMKO-approved 1M bit/s 10% min 16 IFHL = 5 (max) (2) (2) (2) (2) 5000 DIP8 IEC950 design standard version of the TLP559 SEMKO-approved Propagation delay time 450 ns (max) 1M bit/s Propagation delay time 0.8 s (max) Open-collector output (Inverter logic) 20% min 25% min 16 10 Mini-flat MFSOP6 3.3-V power supply 20 MBd Totempole output (Inverter logic) IFHL = 5 (max) Mini-flat MFSOP6 VCC = 3.0 to 20 V 5 Mbit/s Totempole output (Buffer logic) IFLH = 3 (max) Mini-flat MFSOP6 VCC = 3.0 to 20 V 5 Mbit/s Totempole output (Inverter logic) IFHL = 3 (max) 4 GND SHIELD TLP2095 6 TUV 3 5 Vcc 6 c-UL (1) 4 GND SHIELD Vcc 6 4 3750 3 5 4 GND SHIELD 1 UL SDIP6 High CMR DIP8 DIP8 version of the TLP104 TLP759(IGM) TLP759F(IGM) Safety Standards 5 ** TLP759 TLP759F @IF(IN) (mA) BVs 1 Minute (Vrms) 5 TLP750 TLP750F 1 8 Output/CTR 3 2 7 Data Rate (Typ. @NRZ) 4 5 Vcc TLP716 TLP716F Features 3 Note (1): Legend in the Safety Standards column: BSI and IEC : Approved (supplementary or basic insulation) : Approved (reinforced insulation) : Design which meets safety standard/approval pending as of April 2010 BSIEN 60065 / EN 60950 IEC IEC 60065 / IEC 60950 TUV and VDE : Approved : Design which meets safety standard/approval pending as of April 2010 EN 60747-5-2-approved with optionV4 or D4 Note (2): The EN60747-5-2 safety standard for compact packages is different from that for standard DIP packages. Since the mini-flat package is a compact package, please contact your nearest Toshiba sales representative for more details. ** Under development: Specifications subject to change without notice. For the latest information, please contact your nearest Toshiba sales representative. * The pin configuration diagrams only show the general configurations of the circuits. * Contact the Toshiba sales representative for information about RoHS compliance before you purchase any components. 28 2010/8 SCE0004J Part Number Pin Configuration 8 6 Vcc SHIELD TLP2105 4 5 SHIELD Vcc TLP2108 3 6 2 7 GND 1 8 TLP2116 3 4 8 7 6 5 GND 2 SHIELD 2 3 4 8 7 6 5 GND 1 Vcc TLP2118E ** 1 Vcc TLP2118 SHIELD TLP2166A 3 6 2 7 Vcc SHIELD TLP2200 1 2 6 3 GND SHIELD Vcc TLP2360 1 8 3 7 6 3 6 TLP2404 3 6 SHIELD TLP2405 3 6 SHIELD TLP2408 1 8 2 7 3 6 SHIELD 3 6 Vcc SHIELD TLP2418 1 2 3 5 MBd Totempole output (Buffer logic) IFLH = 1.6 (max) SO8 Dual channel version of the TLP108 5 MBd Totempole output (Inverter logic) IFHL = 1.6 (max) 15 MBd Totempole output (Inverter logic) IFHL = 5 (max) 15 MBd Open-collector output (Inverter logic) IFHL = 5 (max) (2) SO8 Dual channel version equivalent for the TLP118 15 MBd Open-collector output (Inverter logic) IFHL=5 (max) SO8 3.3-V power supply Dual channel version equivalent for the TLP2066 15 MBd Totempole output (Inverter logic) IFHL = 3 (max) DIP8 Low input current High-speed High VCC operation 5M bit/s 3-state output (Buffer logic) IFLH = 1.6 (max) SO6(thin package) Reinforced insulation type complies with international safety standards. 3.3-V power supply SO6 version of the TLP2066 20 MBd Totempole output (Inverter logic) IFHL = 5 (max) 0.5 IFHL = 5 (max) (2) (2) SO8 Dual channel version equivalent for the TLP116 SO8 Dual channel version equivalent for the TLP118 (2) (2) (2) (2) (2) (2) 2500 (2) (2) (2) (2) SO8 Low input current SO8 version of the TLP553 300k bit/s SO8 Topr (max) 125C SO8 version of the TLP104 Propagation delay time 450 ns (max) SO8 Low input current SO8 version of the TLP105 5M bit/s Totempole output (Buffer logic) IFLH = 1.6 (max) SO8 Low input current SO8 version of the TLP108 5M bit/s Totempole output (Inverter logic) IFHL = 1.6 (max) SO8 Topr (max) 125C SO8 version of the TLP109 1M bit/s 20% min 16 SO8 Topr (max) 125C High-speed SO8 version of the TLP118 20 MBd Open-collector output (Inverter logic) IFHL = 5 (max) 400% min (2) Open-collector output (Inverter logic) 3750 (2) (2) 4 5 GND 2 7 IEC 4 5 TLP2409 1 8 BSI 4 5 GND 2 7 Vcc 1 8 VDE SO8 Dual channel version of the TLP105 4 5 GND 2 7 Vcc 1 8 TUV 4 5 SHIELD 2 7 c-UL 5 TLP2403 1 8 UL (1) 4 4 5 @IF(IN) (mA) Safety Standards 4 5 GND 1 8 Output/CTR BVs 1 Minute (Vrms) 5 GND 7 Features Data Rate (Typ. @NRZ) 4 (2) Note (1): Legend in the Safety Standards column: BSI and IEC: Approved (supplementary or basic insulation) : Approved (reinforced insulation) : Design which meets safety standard/approval pending as of April 2010 BSIEN 60065 / EN 60950 IEC IEC 60065 / IEC 60950 TUV and VDE : Approved : Design which meets safety standard/approval pending as of April 2010 EN 60747-5-2-approved with optionV4 or D4 Note (2): The EN60747-5-2 safety standard for compact packages is different from that for standard DIP packages. Since the mini-flat package is a compact package, please contact your nearest Toshiba sales representative for more details. ** Under development: Specifications subject to change without notice. For the latest information, please contact your nearest Toshiba sales representative. * The pin configuration diagrams only show the general configurations of the circuits. * Contact the Toshiba sales representative for information about RoHS compliance before you purchase any components. 29 2010/8 SCE0004J IC Output (Continued) Part Number Pin Configuration 8 Features 6 7 5 TLP2451 1 2 3 4 8 7 6 5 TLP2530 2 3 4 8 7 6 5 GND 1 Vcc TLP2531 SHIELD TLP2601 2 7 3 6 Vcc TLP2630 2 7 3 6 Vcc SHIELD TLP2631 1 3 6 2 7 Vcc ** SHIELD TLP2168 1 2 8 3 4 6 5 Vcc GND 7 SHIELD ** 1 ** 5 Vcc 6 TLP2768 3 2 1 2 IFLH = 5 (max) c-UL 3750 DIP8 Dual channel version of the 6N135 and the TLP550 1M bit/s 7% min 16 DIP8 Dual channel version of the 6N136 and the TLP550 1M bit/s 19% min 16 DIP8 High CMR High-speed 10M bit/s Open-collector output (Inverter logic) IFHL = 5 (max) TUV VDE BSI IEC (2) 2500 DIP8 Dual channel version of the 6N137 and the TLP552 10M bit/s Open-collector output (Inverter logic) IFHL = 5 (max) DIP8 High CMR Dual channel version of the TLP554 10M bit/s Open-collector output (Inverter logic) IFHL = 5 (max) Open-collector output (Inverter logic) IFHL = 5 (max) 3750 Open-collector output (Inverter logic) IFHL = 5 (max) 3750 Open-collector output (Inverter logic) IFHL = 5 (max) 5000 SO8 3.3-V/5-V power supply Topr (max) 125C SO8 3.3-V/5-V power supply Topr (max) 125C 20M bit/s (2) (2) 4 4 GND SHIELD TLP2468 Peak output current: 0.6 A (max) UL (1) 4 5 GND 8 @IF(IN) (mA) Safety Standards BVs 1 Minute (Vrms) 4 5 GND 1 8 Propagation delay time 0.7s (max) Output/CTR 4 5 GND 1 8 SO8 Direct drive of a small- power IGBT/MOSFET Low power dissipation Topr (max) 125C SO8 version of the TLP351 Data Rate (Typ. @NRZ) SDIP6 3.3-V/5-V power supply Topr (max) 125C 3 Note (1): Legend in the Safety Standards column: BSI and IEC: Approved (supplementary or basic insulation) : Approved (reinforced insulation) : Design which meets safety standard/approval pending as of April 2010 BSIEN 60065 / EN 60950 IEC IEC 60065 / IEC 60950 TUV and VDE : Approved : Design which meets safety standard/approval pending as of April 2010 EN 60747-5-2-approved with optionV4 or D4 Note (2): The EN60747-5-2 safety standard for compact packages is different from that for standard DIP packages. Since the mini-flat package is a compact package, please contact your nearest Toshiba sales representative for more details. ** Under development: Specifications subject to change without notice. For the latest information, please contact your nearest Toshiba sales representative. * The pin configuration diagrams only show the general configurations of the circuits. * Contact the Toshiba sales representative for information about RoHS compliance before you purchase any components. 30 2010/8 SCE0004J Photovoltaic Output Part Number Pin Configuration 6 Features Short-Circuit Current (A) Rank Min 12 C20 20 24 12 BVs 1 Minute @IF (mA) (Vrms) Safety Standards UL c-UL 10 7 20 10 7 10 20 7 20 10 7 10 @IF (mA) Min 10 7 20 TUV VDE (1) BSI IEC 4 Mini-flat MFSOP6 TLP190B 1 3 6 4 Mini-flat MFSOP6 Built-in shunt regulator TLP191B 1 3 6 4 DIP6 General-purpose TLP590B 1 6 C20 20 24 DIP6 Built-in shunt regulator C40 40 Mini-flat MFSOP6 General-purpose 5 SSOP4 General-purpose 5 TLP3914 SSOP4 High output 20 TLP3924 SSOP4 High open-circuit voltage 4 1 4 TLP3902 1 4 1 3 2 6 2500 3 4 2 TLP591B TLP3904 Open Voltage Voc (V) 3 3 2 7 10 10 30 1500 Note (1): Legend in the Safety Standards column: BSI and IEC: Approved (supplementary or basic insulation) : Approved (reinforced insulation) : Design which meets safety standard/approval pending as of April 2010 BSIEN 60065 / EN 60950 IEC IEC 60065 / IEC 60950 TUV and VDE : Approved : Design which meets safety standard/approval pending as of April 2010 EN 60747-5-2-approved with optionV4 or D4 * The pin configuration diagrams only show the general configurations of the circuits. * Contact the Toshiba sales representative for information about RoHS compliance before you purchase any components. 31 2010/8 SCE0004J Photorelays (MOSFET Output, 1-Form-A) Part Number Pin Configuration Features Trigger LED Current, IFT Max (mA) RON Max () @IF (mA) ION Max (A) VOFF (V) BVs 1 Minute (Vrms) Safety Standards UL c-UL TUV TLP170A 2.54SOP4 Lead pitch: 2.54 mm Low trigger current General-purpose 2 0.4 60 TLP170D 2.54SOP4 Lead pitch: 2.54 mm Low trigger current General-purpose 8 0.2 200 TLP170G 2.54SOP4 Lead pitch: 2.54 mm Low trigger current General-purpose 0.1 350 TLP170J 2.54SOP4 Lead pitch: 2.54 mm Low trigger current General-purpose 60 0.09 600 TLP172A 2.54SOP4 Lead pitch: 2.54 mm High output current General-purpose 2 0.4 60 TLP172G 2.54SOP4 Lead pitch: 2.54 mm General-purpose 0.11 350 0.0.7 60 350 400 0.4 60 0.2 200 350 400 200 4 3 TLP173A 1 2 MFSOP6 General-purpose 1 50 3 35 2 50 2.54SOP4 Lead pitch: 2.54 mm High output current 2 TLP176D 2.54SOP4 Lead pitch: 2.54 mm Low On-resistance TLP176G TLP176GA 2.54SOP4 Lead pitch: 2.54 mm General-purpose TLP179D 2.54SOP4 Lead pitch: 2.54 mm COFF 15 pF (typ.) 5 TLP176A 2.54SOP4 Lead pitch: 2.54 mm General-purpose SEMKO-approved IEC 1500 35 TLP174GA BSI 2 2.54SOP4 Lead pitch: 2.54 mm Current-limiting function Limit current: 150 to 300 mA TLP174G VDE (1) 3 0.12 8 3 5 35 50 3750 (2) (2) (2) (2) (2) (2) 1500 0.12 0.05 Note (1): Legend in the Safety Standards column: BSI and IEC : Approved (supplementary or basic insulation) : Approved (reinforced insulation) : Design which meets safety standard/approval pending as of April 2010 BSIEN 60065 / EN 60950 IEC IEC 60065 / IEC 60950 TUV and VDE: Approved : Design which meets safety standard/approval pending as of April 2010 EN 60747-5-2-approved with optionV4 or D4 Note (2): The EN60747-5-2 safety standard for compact packages is different from that for standard DIP packages. Since the mini-flat package is a compact package, please contact your nearest Toshiba sales representative for more details. * The pin configuration diagrams only show the general configurations of the circuits. * Contact the Toshiba sales representative for information about RoHS compliance before you purchase any components. 32 2010/8 SCE0004J Part Number Pin Configuration Features TLP192A TLP192G TLP197A 5 6 4 TLP197D 1 3 2 TLP197G TLP197GA TLP199D TLP200D TLP202A TLP202G 8 6 7 5 TLP206A 1 2 3 TLP206G TLP206GA TLP209D TLP220A ** TLP220D ** TLP220G ** 4 TLP220GA ** TLP220J ** TLP221A ** 1 3 2 4 2.54SOP6 Lead pitch: 2.54 mm High output current 2.54SOP6 Lead pitch: 2.54 mm 2.54SOP6 Lead pitch: 2.54 mm High output current 2.54SOP6 Lead pitch: 2.54 mm Low On-resistance 2.54SOP6 Lead pitch: 2.54 mm SEMKO-approved 2.54SOP6 Lead pitch: 2.54 mm 2.54SOP6 Lead pitch: 2.54 mm COFF 15 pF (typ.) 2.54SOP8 Lead pitch: 2.54 mm Dual channel version of the TLP176D 2.54SOP8 Lead pitch: 2.54 mm Dual channel version of the TLP172A 2.54SOP8 Lead pitch: 2.54 mm Dual channel version of the TLP172G 2.54SOP8 Lead pitch: 2.54 mm Dual channel version of the TLP176A 2.54SOP8 Lead pitch: 2.54 mm Dual channel version of the TLP176G 2.54SOP8 Lead pitch: 2.54 mm Dual channel version of the TLP176GA 2.54SOP8 Lead pitch: 2.54 mm Dual channel version of the TLP179D DIP4 General-purpose Reinforced insulation DIP4 General-purpose Reinforced insulation DIP4 General-purpose Reinforced insulation DIP4 General-purpose Reinforced insulation DIP4 General-purpose Reinforced insulation DIP4 General-purpose Reinforced insulation Trigger LED Current, IFT Max (mA) RON ION BVs Max VOFF (V) 1 Minute (A) (Vrms) UL c-UL 2 0.4 60 35 0.11 350 2 0.4 60 0.2 200 350 400 Max () 8 @IF (mA) 5 Safety Standards TUV (2) VDE (2) (1) BSI IEC 0.12 35 50 0.05 200 8 0.2 200 3 1500 2 0.4 60 50 0.11 350 0.4 60 350 400 0.05 200 2 5 (2) (2) 0.12 35 50 2 5 0.5 60 8 5 0.25 200 50 5 0.1 350 5000 2 35 5 0.12 400 60 5 0.09 600 0.2 5 1.5 60 Note (1): Legend in the Safety Standards column: BSI and IEC : Approved (supplementary or basic insulation) : Approved (reinforced insulation) : Design which meets safety standard/approval pending as of April 2010 BSIEN 60065 / EN 60950 IEC IEC 60065 / IEC 60950 TUV and VDE: Approved : Design which meets safety standard/approval pending as of April 2010 EN 60747-5-2-approved with optionV4 or D4 Note (2): The EN60747-5-2 safety standard for compact packages is different from that for standard DIP packages. Since the mini-flat package is a compact package, please contact your nearest Toshiba sales representative for more details. ** Under development: Specifications subject to change without notice. For the latest information, please contact your nearest Toshiba sales representative. * The pin configuration diagrams only show the general configurations of the circuits. * Contact the Toshiba sales representative for information about RoHS compliance before you purchase any components. 33 2010/8 SCE0004J Photorelays (MOSFET Output, 1-Form-A) (Continued) Part Number Pin Configuration 4 Features Trigger LED Current, IFT Max (mA) RON Max () @IF (mA) ION Max (A) VOFF (V) BVs 1 Minute (Vrms) 2 6 2 4 1 7 3 2 6 2 4 1 3 4 3 2 6 7 3 2 4 1 7 4 3 2 6 2 3 4 3 5 4 0.5 50 5 0.12 2 6 35 5 0.12 2 350 DIP8 Dual channel version of the TLP224G SEMKO-approved 2500 35 DIP8 Dual channel version of the TLP224GA Current-limiting function Limit current: 150 to 300 mA 5 0.12 400 5 3 3 5 TLP227A-2 1 3 1.1 10 0.5 60 DIP4 General-purpose SEMKO-approved 1 7 350 2 3 TLP227A 8 60 DIP8 Dual channel version of the TLP222G SEMKO-approved DIP4 For DC use only TLP225A 1 4 5 DIP4 For modems Current-limiting function Limit current: 150 to 300 mA TLP224GA-2 1 DIP4 General-purpose SEMKO-approved 5 TLP224GA 8 DIP4 Current-limiting function Limit current: 150 to 300 mA SEMKO-approved TLP224G-2 1 5 TLP224G 8 DIP8 Dual channel version of the TLP222A 2 4 TLP222G-2 1 VDE 3 TLP222G 8 5 TLP222A-2 1 IEC c-UL DIP4 High output current General-purpose 1 7 BSI UL TUV (1) 3 TLP222A 8 Safety Standards 4 2 DIP8 Dual channel version of the TLP227A SEMKO-approved 5 0.5 60 Note (1): Legend in the Safety Standards column: BSI and IEC : Approved (supplementary or basic insulation) : Approved (reinforced insulation) : Design which meets safety standard/approval pending as of April 2010 BSIEN 60065 / EN 60950 IEC IEC 60065 / IEC 60950 TUV and VDE: Approved : Design which meets safety standard/approval pending as of April 2010 EN 60747-5-2-approved with optionV4 or D4 * The pin configuration diagrams only show the general configurations of the circuits. * Contact the Toshiba sales representative for information about RoHS compliance before you purchase any components. 34 2010/8 SCE0004J Part Number Pin Configuration 4 Features Trigger LED Current, IFT Max (mA) RON Max () @IF (mA) ION Max (A) VOFF (V) BVs 1 Minute (Vrms) UL c-UL TUV VDE BSI IEC DIP8 Dual channel version of the TLP227G SEMKO-approved DIP4 General-purpose SEMKO-approved DIP4 General-purpose SEMKO-approved 1 7 2 6 2 3 4 4 1 2 6 7 2 6 3 5 3 5 TLP227GA-2 1 35 5 0.12 350 3 TLP227GA 8 3 5 TLP227G-2 1 4 4 TLP592A 35 5 0.12 400 DIP8 Dual channel version of the TLP227GA SEMKO-approved 2500 DIP6 High output current 2 3 0.5 60 5 DIP6 General-purpose 50 0.12 350 TLP597A DIP6 High output current SEMKO-approved 2 0.5 60 TLP597G DIP6 General-purpose SEMKO-approved 350 TLP597GA DIP6 General-purpose SEMKO-approved 400 TLP598AA DIP6 High output current TLP592G 1 TLP598GA TLP797GA TLP797GAF (1) 3 TLP227G 8 Safety Standards 2 3 6 5 4 1 2 3 DIP6 Low On-resistance DIP6 High isolation voltage 3 0.12 35 5 2 0.5 60 12 0.15 400 0.12 400 3 3 35 TLP797J TLP797JF TLP798GA 10 0.1 600 5 DIP6 Low On-resistance 5000 DIP6 High isolation voltage 12 5 0.15 400 Note (1): Legend in the Safety Standards column: BSI and IEC : Approved (supplementary or basic insulation) : Approved (reinforced insulation) : Design which meets safety standard/approval pending as of April 2010 BSIEN 60065 / EN 60950 IEC IEC 60065 / IEC 60950 TUV and VDE: Approved : Design which meets safety standard/approval pending as of April 2010 EN 60747-5-2-approved with optionV4 or D4 * The pin configuration diagrams only show the general configurations of the circuits. * Contact the Toshiba sales representative for information about RoHS compliance before you purchase any components. 35 2010/8 SCE0004J Photorelays (MOSFET Output, 1-Form-A) (Continued) RON Part Number Pin Configuration TLP3100 5 6 TLP3102 4 ** Features Trigger LED Current, IFT Max (mA) Max () Safety Standards @IF (mA) ION VOFF Max (V) (A) BVs 1 Minute (Vrms) UL c-UL 2.54SOP6 Lead pitch: 2.54 mm Low On-resistance High output current: ION = 2.5 A (max) @Ta: up to 50C For measuring instruments and power supply lines 0.05 2.5 20 2.54SOP6 General-purpose High output current: ION = 2.5 A (max) @Ta: up to 50C C-connection: ION(DC)=5.0A(Max) 0.06 2.5 40 3 ** 0.07 2.3 60 ** 2.54SOP6 General-purpose High output current: ION = 1.4A (Max) @Ta: up to 50C C-connection: ION(DC)=2.8A(Max) 0.2 1.4 100 Lead pitch: 2.54 mm Low CR COFF: 100 pF (typ.) For measuring instruments 1.2 0.35 60 20 0.1 80 TLP3113 2.54SOP4 Lead pitch: 2.54 mm Ultra-low CR: 15 pF * COFF: 0.6 pF (typ.) For measuring instruments 35 0.08 TLP3114 2.54SOP4 Lead pitch: 2.54 mm Ultra-low CR: 10 pF * COFF: 5 pF (typ.) For measuring instruments 3 0.25 TLP3103 TLP3105 TLP3110 TLP3111 3 2 4 1 4 3 2 3 TLP3115 1 2 2.54SOP4 Lead pitch: 2.54 mm Low CR COFF: 11 pF (typ.) For measuring instruments 2.54SOP4 Lead pitch: 2.54 mm Ultra-low CR: 10 pF * COFF: 10 pF (typ.) For measuring instruments VDE BSI IEC 5 2.54SOP6 General-purpose High output current: ION = 2.3A (Max) @Ta: up to 50C C-connection: ION(DC)=4.6A(Max) 1 TUV (1) 4 5 1.5 4 TLP3116 2.54SOP4 Lead pitch: 2.54 mm Ultra-low CR: 10 pF * COFF: 1 pF (typ.) For measuring instruments 15 TLP3116A 2.54SOP4 Lead pitch: 2.54 mm Ultra-low CR: 10 pF * COFF 1.65 pF (typ.) 3.0 pF (max) For measuring instruments 9.5 5 0.3 40 1500 0.12 Note (1): Legend in the Safety Standards column: BSI and IEC: Approved (supplementary or basic insulation) : Approved (reinforced insulation) : Design which meets safety standard/approval pending as of April 2010 BSIEN 60065 / EN 60950 IEC IEC 60065 / IEC 60950 TUV and VDE: Approved : Design which meets safety standard/approval pending as of April 2010 EN 60747-5-2-approved with optionV4 or D4 ** Under development: Specifications subject to change without notice. For the latest information, please contact your nearest Toshiba sales representative. * The pin configuration diagrams only show the general configurations of the circuits. * Contact the Toshiba sales representative for information about RoHS compliance before you purchase any components. 36 2010/8 SCE0004J Part Number Pin Configuration TLP3118 4 2.54SOP4 Lead pitch: 2.54 mm Low CR: 40 pF * COFF: 2.5 pF (typ.) 3.5 pF (max) For measuring instruments 3 1 Features Trigger LED Current, IFT Max (mA) RON Max () 25 3 TLP3119 VOFF (V) 0.04 80 0.2 80 1.25 80 BVs 1 Minute (Vrms) Safety Standards UL c-UL 8 2.54SOP6 Lead pitch: 2.54 mm High output current ION: 1.25 A (max) For measuring instruments and power supply lines 5 0.15 TLP3121 2.54SOP4 Lead pitch: 2.54 mm Low CR: 30 pF * For measuring instruments 4 1.2 0.35 80 TLP3122 2.54SOP4 Lead pitch: 2.54 mm High output current ION: 1 A (max) @Ta: up to 50C For measuring instruments and power supply lines 0.7 1 60 5 6 4 TLP3120 1 3 2 4 3 1 2 2.54SOP4 Lead pitch: 2.54 mm High output current ION: 1 A (max) @Ta: up to 50C For measuring instruments and power supply lines TLP3123 8 7 6 TLP3130 TLP3131 TLP3203 TLP3212 2 4 1 4 1 VDE BSI IEC 5 5 3 1500 0.13 1 40 0.2 400 5 TLP3125 1 TUV (1) 5 Lead pitch: 2.54 mm Low CR: 30 pF * COFF: 6.5 pF (typ.) 11 pF (Max) For measuring instruments 2 @IF (mA) ION Max (A) 3 4 3 2 3 2 2.54SOP8 Lead pitch: 2.54 mm Low On-resistance For measuring instruments 2.54SOP4 Lead pitch: 2.54 mm Ultra-low CR: 5 pF * COFF: 1 pF (typ.) For measuring instruments 2.54SOP4 Lead pitch: 2.54 mm Ultra-low CR: 5 pF * COFF: 5 pF (typ.) For measuring instruments 3 4 5 0.16 8 4 SSOP4 Ultra-low On-resistance R 0.18 (typ.) High output current ION: 0.9 A (max) 3 SSOP4 Low CR: 20 pF * COFF: 20 pF (typ.) For measuring instruments 5 5 20 1.2 0.3 0.22 0.9 20 0.4 60 5 1.5 Note (1): Legend in the Safety Standards column: BSI and IEC : Approved (supplementary or basic insulation) : Approved (reinforced insulation) : Design which meets safety standard/approval pending as of April 2010 BSIEN 60065 / EN 60950 IEC IEC 60065 / IEC 60950 TUV and VDE : Approved : Design which meets safety standard/approval pending as of April 2010 EN 60747-5-2-approved with optionV4 or D4 * The pin configuration diagrams only show the general configurations of the circuits. * Contact the Toshiba sales representative for information about RoHS compliance before you purchase any components. 37 2010/8 SCE0004J Photorelays (MOSFET Output, 1-Form-A) (Continued) Part Number Pin Configuration Features Trigger LED Current, IFT Max (mA) RON Max () @IF (mA) ION VOFF Max (V) (A) BVs 1 Minute (Vrms) Safety Standards UL TLP3213 SSOP4 Ultra-low CR: 15 pF * COFF: 0.6 pF (typ.) For measuring instruments 35 0.08 TLP3214 SSOP4 Ultra-low CR: 10 pF * COFF: 5 pF (typ.) For measuring instruments 3 0.25 TLP3215 SSOP4 Ultra-low CR: 10 pF * COFF: 10 pF (typ.) For measuring instruments 1.5 0.3 TLP3216 SSOP4 Ultra-low CR: 10 pF * COFF: 1 pF (typ.) For measuring instruments 15 TLP3216A SSOP4 Ultra-low CR: 10 pF * COFF 1.65 pF (typ.) 3.0 pF (max) For measuring instruments 9.5 TLP3217 SSOP4 Low CR COFF: 5 pF (typ.) For measuring instruments 4 3 TLP3218 1 2 SSOP4 Low CR: 40 pF COFF 2.5 pF (typ.) 3.5 pF (max) For measuring instruments TLP3219 SSOP4 Low CR: 30 pF COFF 6.5 pF (typ.) 11 pF (max) For measuring instruments TLP3220 SSOP4 Peak off-state voltage: 100 V For measuring instruments TLP3230 SSOP4 Ultra-low CR: 5 pF * COFF: 1 pF (typ.) For measuring instruments TLP3231 SSOP4 Ultra-low CR: 5 pF * COFF: 5 pF (typ.) For measuring instruments TLP3240 SSOP4 Ultra-low CR: 5 pF * COFF: 0.45 pF (typ.) For measuring instruments TLP3241 SSOP4 Ultra-low CR: 5 pF * COFF: 0.7 pF (typ.) For measuring instruments 4 c-UL TUV VDE (1) BSI IEC 40 5 5 0.12 80 12 0.04 25 1500 80 3 0.2 8 5 14 10 0.08 100 0.16 8 20 4 1.2 0.45 0.12 5 14 40 3 10 0.14 Note (1): Legend in the Safety Standards column: BSI and IEC: Approved (supplementary or basic insulation) : Approved (reinforced insulation) : Design which meets safety standard/approval pending as of April 2010 BSIEN 60065 / EN 60950 IEC IEC 60065 / IEC 60950 TUV and VDE: Approved : Design which meets safety standard/approval pending as of April 2010 EN 60747-5-2-approved with optionV4 or D4 * The pin configuration diagrams only show the general configurations of the circuits. * Contact the Toshiba sales representative for information about RoHS compliance before you purchase any components. 38 2010/8 SCE0004J Part Number Pin Configuration TLP3250 TLP3312 4 ** 3 Features Trigger LED Current, IFT Max (mA) RON Max () @IF (mA) ION Max (A) VOFF (V) SSOP4 Ultra-low CR: 2.5 pF * COFF: 0.8 pF (typ.) For measuring instruments 5 0.2 20 USOP4 COFF 20 pF (typ.) 1 0.4 60 5 1 TLP3375 TLP3275 2 USOP4 COFF 12 pF (typ.) ** ** 6 5 4 TLP3542 1 2 3 BVs 1 Minute (Vrms) 1500 Safety Standards UL c-UL TUV VDE (1) BSI IEC 500 1.5 0.3 50 SSOP4 COFF 12 pF (typ.) 1.5 0.3 50 1500 DIP6 Low On-resistance High output current: ION = 2.5 A (max) For measuring instruments and power supply lines 0.1 2.5 60 2500 3 10 Note (1): Legend in the Safety Standards column: BSI and IEC : Approved (supplementary or basic insulation) : Approved (reinforced insulation) : Design which meets safety standard/approval pending as of April 2010 BSIEN 60065 / EN 60950 IEC IEC 60065 / IEC 60950 TUV and VDE: Approved : Design which meets safety standard/approval pending as of April 2010 EN 60747-5-2-approved with optionV4 or D4 ** Under development: Specifications subject to change without notice. For the latest information, please contact your nearest Toshiba sales representative. * The pin configuration diagrams only show the general configurations of the circuits. * Contact the Toshiba sales representative for information about RoHS compliance before you purchase any components. 39 2010/8 SCE0004J Photorelays (MOSFET Output, 1-Form-B) Part Number Pin Configuration 8 Features 6 7 5 TLP4006G TLP4007G 1 2 3 1-form-b TLP4026G TLP4027G 8 1 2 1 TLP4206G 8 1 2 2.54SOP6 Lead pitch: 2.54 mm General-purpose 1-Form-B 4 2.54SOP6 Lead pitch: 2.54 mm General-purpose 1-Form-B 3 2 3 4 3 5 4 1 8 2.54SOP8 Lead pitch: 2.54 mm Dual channel version of the TLP4176G 2-Form-B 2 6 7 1-Form-A 0.12 5 3 50 25 0 1-Form-A 0.12 0.09 50 0.09 0.12 2 3 4 3 1 2 7 6 1500 0.09 50 3 350 0 25 0.12 50 0.09 3 350 0 0.12 25 50 0 0.1 350 6 1 5 2 4 4 3 2500 3 5 3 2 DIP4 General-purpose 1-Form-B SEMKO-approved TLP4227G-2 1 IEC 4 TLP4227G 8 BSI DIP8 Dual channel version of the TLP4222G 2-Form-B 1 VDE 350 0 25 TUV 350 50 3 c-UL (1) 2500 1-Form-B 0 UL 0.1 5 3 Safety Standards 350 1-Form-B 3 5 TLP4222G-2 TLP4597G 2.54SOP8 Lead pitch: 2.54 mm Dual channel version of the TLP4172G 2-Form-B 25 ION BVs VOFF Max 1 Minute (V) (A) (Vrms) DIP4 General-purpose 1-Form-B TLP4222G TLP4592G 2.54SOP8 Lead pitch: 2.54 mm General-purpose 1-Form-A/1-Form-B 2.54SOP4 Lead pitch: 2.54 mm General-purpose 1-Form-B 6 7 2.54SOP8 Lead pitch: 2.54 mm General-purpose 1-Form-A/1-Form-B 2.54SOP4 Lead pitch: 2.54 mm General-purpose 1-Form-B 2 1 DIP8 General-purpose 1-Form-A/1-Form-B 3 5 6 TLP4197G 4 1-form-a 4 TLP4192G 5 3 1-form-b TLP4176G TLP4202G 6 7 TLP4172G 4 1-form-a DIP8 General-purpose 1-Form-A/1-Form-B RON Trigger LED Current, IFT Max @IF Max(mA) () (mA) 25 0 0.15 350 DIP8 Dual channel version of the TLP4227G SEMKO-approved 2-Form-B DIP6 General-purpose 1-Form-B DIP6 General-purpose 1-Form-B SEMKO-approved 0.1 50 3 350 0 25 0.15 Note (1): Legend in the Safety Standards column: BSI and IEC : Approved (supplementary or basic insulation) : Approved (reinforced insulation) : Design which meets safety standard/approval pending as of April 2010 BSIEN 60065 / EN 60950 IEC IEC 60065 / IEC 60950 TUV and VDE : Approved : Design which meets safety standard/approval pending as of April 2010 EN 60747-5-2-approved with optionV4 or D4 * The pin configuration diagrams only show the general configurations of the circuits. * Contact the Toshiba sales representative for information about RoHS compliance before you purchase any components. 40 2010/8 SCE0004J Products Manufactured by Toshiba Semiconductor Thailand Co., Ltd. (Transistor Output) Part Number Pin Configuration 6 3 4 TLP181(T) 1 4 3 3 TLP280(T) 1 4 2 3 TLP281(T) 1 2 4 3 TLP284(T) 1 2 4 3 TLP285(T) 1 4 VCEO (V) 2 3 1 2 7 6 TUV VDE BSI IEC (2) 3750 (2) Mini-flat MFSOP6 Transistor output General-purpose 80 3750 (2) (2) SOP4 Lead pitch: 1.27 mm AC input SEMKO-approved 80 2500 (2) (2) SOP4 Lead pitch: 1.27 mm General-purpose 80 2500 (2) (2) SOP4 Lead pitch: 1.27 mm AC input General-purposeHigh BVs Creepage distance: 5.0 mm (min) 80 (2) (2) SOP4 Lead pitch: 1.27 mm General-purposeHigh BVs Creepage distance: 5.0 mm (min) 80 (2) (2) 3750 55 2500 DIP8 Dual channel version of the TLP521-1(T) 2 3 4 3 4 DIP4 Transistor output AC input SEMKO-approved TLP620(T) TLP620F(T) 8 c-UL 80 5 TLP521-2(T) 1 UL (1) Mini-flat MFSOP6 AC input SEMKO-approved DIP4 Transistor output AC input TLP521-1(T) 8 Safety Standards BVs 1 Minute (Vrms) 4 TLP180(T) 1 6 Features 1 2 7 6 5 55 5000 55 5000 DIP8 Dual channel version of the TLP620(T) SEMKO-approved TLP620-2(T) 1 2 3 4 3 4 DIP4 Transistor output High isolation voltage SEMKO-approved TLP621(T) TLP621F(T) 8 1 2 7 6 5 DIP8 Dual channel version of the TLP621(T) SEMKO-approved TLP621-2(T) 1 2 3 4 Note (1): Legend in the Safety Standards column: BSI and IEC : Approved (supplementary or basic insulation) : Approved (reinforced insulation) : Design which meets safety standard/approval pending as of April 2010 BSIEN 60065 / EN 60950 IEC IEC 60065 / IEC 60950 TUV and VDE: Approved : Design which meets safety standard/approval pending as of April 2010 EN 60747-5-2-approved with optionV4 or D4 Although the photocouplers manufactured by Toshiba Semiconductor (Thailand) Co., Ltd. are generally sold outside of Japan, some of them are also available in Japan. For details, contact your nearest Toshiba sales representative. Note (2): The EN60747-5-2 safety standard for compact packages is different from that for standard DIP packages. Since the mini-flat package is a compact package, please contact your nearest Toshiba sales representative for more details. * The pin configuration diagrams only show the general configurations of the circuits. * Contact the Toshiba sales representative for information about RoHS compliance before you purchase any components. 41 2010/8 SCE0004J Products Manufactured by Toshiba Semiconductor Thailand Co., Ltd. (Darlington Transistor Output) Part Number Pin Configuration Features VCEO (V) Safety Standards BVs 1 Minute (Vrms) UL 4 1 7 TUV VDE BSI IEC 3 DIP4 Darlington Transistor Output High VCEO SEMKO-approved TLP627(T) 8 c-UL (1) 2 6 300 5 5000 DIP8 Dual channel version of the TLP627(T) SEMKO-approved TLP627-2(T) 1 2 3 4 Note (1): Legend in the Safety Standards column: BSI and IEC : Approved (supplementary or basic insulation) : Approved (reinforced insulation) : Design which meets safety standard/approval pending as of April 2010 BSIEN 60065 / EN 60950 IEC IEC 60065 / IEC 60950 TUV and VDE: Approved : Design which meets safety standard/approval pending as of April 2010 EN 60747-5-2-approved with optionV4 or D4 Although the photocouplers manufactured by Toshiba Semiconductor (Thailand) Co., Ltd. are generally sold outside of Japan, some of them are also available in Japan. For details, contact your nearest Toshiba sales representative. * The pin configuration diagrams only show the general configurations of the circuits. * Contact the Toshiba sales representative for information about RoHS compliance before you purchase any components. 42 2010/8 SCE0004J Products Manufactured by Toshiba Semiconductor Thailand Co., Ltd. (Triac Output) Trigger LED Current, IFT Part Number Pin Configuration Features Rank 4 Max (mA) Max (V) 1 2 4 3 DIP4 Zero cross 3.0 IFT7 7 10 IFT7 7 1 DIP4 Zero cross High impulse noise immunity VN = 2000 V (typ.) 2 6 4 DIP6 General-purpose Non-zero cross TLP560J(T) 1 2 6 3 4 TLP561G(T) ZC TLP561J(T) TLP3022(S,T) TLP3022F(S,T) TLP3023(S,T) TLP3023F(S,T) TLP3052(S,T) TLP3052F(S,T) 1 2 6 1 4 2 DIP6 General-purpose Zero cross 3 3 TLP3042(S,T) DIP6 SEMKO-approved Non-zero cross DIP6 High VDRM SEMKO-approved Non-zero cross TLP3043(S,T) DIP6 SEMKO-approved Zero cross TLP3062(S,T) TLP3062F(S,T) TLP3063(S,T) TLP3063F(S,T) DIP6 SEMKO-approved High VDRM Zero cross 6 4 ZC 10 10 IFT7 7 IFT5 5 10 IFT7 7 c-UL TUV VDE BSI IEC 10 IFT7 7 IFT5 5 10 IFT7 7 10 5 10 10 5 100 3.0 100 600 400 2500 400 3.0 100 600 10 5 100 5000 600 400 600 3.0 TLP3082(S,T) DIP6 Zero cross 10 TLP3782(S,T) TLP3782F(S,T) TLP3783(S,T) TLP3783F(S,T) DIP6 High impulse noise immunity VN = 1500 V (typ.) 10 3 3.0 3.0 3 2 600 400 TLP3064(S,T) 100 600 DIP6 SEMKO-approved Zero cross 1 UL (1) 5000 ZC TLP560G(T) Safety Standards 10 DIP4 Non-zero cross TLP363J(T) TLP363JF(T) @ITM (mA) Off-State BVs Output Terminal 1 Minute Voltage (Vrms) VDRM (V) 3 TLP360J(T) TLP360JF(T) TLP361J(T) TLP361JF(T) Peak On-State Voltage, VTM 100 5000 800 800 5 Note (1): Legend in the Safety Standards column: BSI and IEC : Approved (supplementary or basic insulation) : Approved (reinforced insulation) : Design which meets safety standard/approval pending as of April 2010 BSIEN 60065 / EN 60950 IEC IEC 60065 / IEC 60950 TUV and VDE: Approved : Design which meets safety standard/approval pending as of April 2010 EN 60747-5-2-approved with optionV4 or D4 Although the photocouplers manufactured by Toshiba Semiconductor (Thailand) Co., Ltd. are generally sold outside of Japan, some of them are also available in Japan. For details, contact your nearest Toshiba sales representative. * The pin configuration diagrams only show the general configurations of the circuits. * Contact the Toshiba sales representative for information about RoHS compliance before you purchase any components. 43 2010/8 SCE0004J Fiber-Optic Devices (TOSLINKTM) Simplex Optical Modules Transmitting Module (General-Purpose Optical Modules) Receiving Module Emission Transmission Pulse Width Data Rate Distortion Wavelength Distance (NRZ, Mb/s) (1) (1) (nm) (m) (ns) Supply Voltage (V) Operating Temperature (C) Compatible Optical Connector Compatible Optical Compatible Optical Fiber Fiber (7) with Fiber-Optic Connectors (m) TOTX1950(F) ** (2) TORX1950(F) ** DC to 10 650 Up to 50 30 5 0.25 -40 to 85 JIS F05 APF (980/1000) NA = 0.5 LUCT1-TC1000-xxM (3) TOCP100-xxMBT (4) TOTX1951(F) ** (2) TORX1951(F) ** DC to 6 650 Up to 40 55 5 0.25 -40 to 70 JIS F05 APF (980/1000) NA = 0.5 LUCT1-TC1000-xxM (3) TOCP100-xxMBT (4) TORX1952(F) ** DC to 10 650 Up to 10 30 5 0.25 -40 to 85 JIS F05 APF (980/1000) NA = 0.5 LUCT1-TC1000-xxM (3) TOCP100-xxMBT (4)) TORX1950(F) ** DC to 10 770 Up to 1000 30 5 0.25 -40 to 85 JIS F05 PCF (200/230) CF-1071 (HC-20/70) Series(5) OPC202HV Series (6) TOTX1952(F) ** TOTX1960(F) * * (2) * TOSLINKTM is a registered trademark of Toshiba Corporation in Japan and other countries. Note (1) All values at Ta = 25C (2) The external resistor value must be chosed, based on the transmission distance. (3) Manufactured by Asahi Kasei EMD Corporation. (4) Manufactured by Toray Industries, Inc. (5) Manufactured by Sumitomo Electric Industries (SEI), Ltd. (6) Manufactured by Oki Electric Cable Co., Ltd. (7) For details on optical fiber cables with connectors, contact the respective manufactures. * Contact the Toshiba sales representative for information about RoHS compliance before you purchase any components. **: Under development (High-Speed Optical Modules) Transmitting Module TOTX1400(F) TOTX1701(F) Receiving Module TORX1400(F) TORX1701(F) Emission Data Rate Wavelength (NRZ, Mb/s) (nm) 20 to 125 20 to 125 650 650 Transmission Distance (1) (m) Up to 50 Up to 20 (APF) Operating Supply Voltage Temperature (V) (C) 3.3 0.3 3.3 0.3 Up to 100 (GI-PCF) -10 to 70 -10 to 70 Compatible Optical Connector Compatible Optical Fiber (m) Compatible Optical Fiber (7) with Fiber-Optic Connectors SMA APF (980/1000) NA = 0.3 JIS F05 APF (980/1000) NA = 0.5 GI-PCF (200/230) LUCT1-TC1000-xxM (3) TOCP100-xxMBT (4) CF-1071 (HC-20/80) Series (5) Note (1) All values at Ta = 25C (3) Manufactured by Asahi Kasei EMD Corporation. (4) Manufactured by Toray Industries, Inc. (5) Manufactured by Sumitomo Electric Industries (SEI), Ltd. (7) For details on optical fiber cables with connectors, contact the respective manufactures. * Contact the Toshiba sales representative for information about RoHS compliance before you purchase any components. 44 2010/8 SCE0004J (Digital Audio Transmitting Modules) Transmitting Module TOTX147A(F,T) ** (9) TOTX147A(F,TJ) ** (9) TOTX147AL(F,T) ** (9) (10) TOTX147AL(F,TJ) Emission Pulse Width Operating Compatible Optical Compatible Optical Fiber Fiber output power Supply Voltage Data Rate Compatible Optical Wavelength Distortion Temperature Fiber with Fiber-Optic (1) (dBm) (NRZ, Mb/s) (V) Connector (1) (7) (nm) (C) (ns) (m) Connectors (12) ** (9) (10) TOTX147APL(F,T) ** (10) (11) TOTX147APL(F,TJ) ** (10) (11) TOTX177A(F,T) (9) ** TOTX177A(F,TJ) ** TOTX177AL(F,T) ** TOTX177AL(F,TJ) ** (9) DC to 15 650 -21 to -15 15 2.7 to 3.6 -20 to 70 JEITA RC-5720C Square APF (980/1000) NA = 0.5 RFA4011-xxx (8) DC to 15 650 -21 to -15 15 2.7 to 3.6 -20 to 70 JEITA RC-5720C Square APF (980/1000) NA = 0.5 RFA4011-xxx (8) DC to 15 650 -21 to -15 15 2.7 to 3.6 -20 to 70 JEITA RC-5720C Square APF (980/1000) NA = 0.5 RFA4011-xxx (8) DC to 15 650 -21 to -15 15 5 0.25 -20 to 70 JEITA RC-5720C Square APF (980/1000) NA = 0.5 RFA4011-xxx (8) DC to 15 650 -21 to -15 15 5 0.25 -20 to 70 JEITA RC-5720C Square APF (980/1000) NA = 0.5 RFA4011-xxx (8) DC to 15 650 -21 to -15 15 5 0.25 -20 to 70 JEITA RC-5720C Square APF (980/1000) NA = 0.5 RFA4011-xxx (8) (9) (10) (9) (10) TOTX177APL(F,T) ** (10) (11) TOTX177APL(F,TJ) ** (10) (11) All values at Ta = 25C **: Under development For details on optical fiber cables with connectors, contact the respective manufactures. Manufactured by Mitsubishi Rayon Co., Ltd. Panel-mount type Shutter-equipped Mini-package type (fixed to printed circuit board) Optical modules with the (F,T) suffix are manufactured by Toshiba Semiconductor Thailand Co., Ltd. The ordering codes for these optical modules have the (F, TJ) suffix in Japan. For details, contact the your local Toshiba distributor. * Contact the Toshiba sales representative for information about RoHS compliance before you purchase any components. Note (1) (7) (8) (9) (10) (11) (12) (Digital Audio Receiving Modules) Receiving Module TORX147(F,T) TORX147(F,TJ) TORX147L(F,T) TORX147L(F,TJ) TORX147PL(F,T) TORX147PL(F,TJ) TORX177(F,T) TORX177(F,TJ) TORX177L(F,T) TORX177L(F,TJ) TORX177PL(F,T) TORX177PL(F,TJ) (12) Data Rate (NRZ, Mb/s) Maximum Receivable Power (1) (dBm) Pulse Width Distortion (1) (ns) 0.1 to 15 -24 Max 15 2.7 to 3.6 0.1 to 15 -24 Max 15 0.1 to 15 -24 Max 0.1 to 15 Operating Supply Voltage Temperature (V) (C) Compatible Optical Connector Compatible Optical Fiber (m) -20 to 70 JEITA RC-5720C Square APF (980/1000) NA = 0.5 RFA4011-xxx (8) 2.7 to 3.6 -20 to 70 JEITA RC-5720C Square APF (980/1000) NA = 0.5 RFA4011-xxx (8) 15 2.7 to 3.6 -20 to 70 JEITA RC-5720C Square APF (980/1000) NA = 0.5 RFA4011-xxx (8) -24 Max 15 5 0.25 -20 to 70 JEITA RC-5720C Square APF (980/1000) NA = 0.5 RFA4011-xxx (8) 0.1 to 15 -24 Max 15 5 0.25 -20 to 70 JEITA RC-5720C Square APF (980/1000) NA = 0.5 RFA4011-xxx (8) 0.1 to 15 -24 Max 15 5 0.25 -20 to 70 JEITA RC-5720C Square APF (980/1000) NA = 0.5 RFA4011-xxx (8) (9) (9) (9) (10) (9) (10) (10) (11) (10) (11) (9) (9) (9) (10) (9) (10) (10) (11) (10) (11) Compatible Optical Fiber with Fiber-Optic (7) Connectors All values at Ta = 25C For details on optical fiber cables with connectors, contact the respective manufactures. Manufactured by Mitsubishi Rayon Co., Ltd. Panel-mount type Shutter-equipped Mini-package type (fixed to printed circuit board) Optical modules with the (F,T) suffix are manufactured by Toshiba Semiconductor Thailand Co., Ltd. The ordering codes for these optical modules have the (F, TJ) suffix in Japan. For details, contact the your local Toshiba distributor. * Contact the Toshiba sales representative for information about RoHS compliance before you purchase any components. Note (1) (7) (8) (9) (10) (11) (12) 45 2010/8 SCE0004J Duplex Modules (General-Purpose Optical Modules) Transceiving Module TODX2950(F) ** (2) TODX2951(F) ** (2) TODX2952(F) ** TODX2960(F) * * (2) Data Rate (NRZ, Mb/s) Emission Transmission Distance Wavelength (1) (nm) (m) Pulse Width Distortion (1) (ns) Operating Supply Voltage Temperature (V) (C) Compatible Optical Connector Compatible Optical Fiber (m) Compatible Optical Fiber (7) with Fiber-Optic Connectors DC to 10 650 Up to 50 30 5 0.25 -40 to 85 JIS F07 APF (980/1000) NA = 0.5 LUCT2-TC1000W-xxM (3) TOCP200-xxMBT (4) DC to 6 650 Up to 40 55 5 0.25 -40 to 85 JIS F07 APF (980/1000) NA = 0.5 LUCT2-TC1000W-xxM (3) TOCP200-xxMBT (4) DC to 10 650 Up to 10 30 5 0.25 -40 to 85 JIS F07 APF (980/1000) NA = 0.5 LUCT2-TC1000W-xxM (3) TOCP200-xxMBT (4)) DC to 10 770 Up to 1000 30 5 0.25 -40 to 85 JIS F07 PCF (200/230) CF-2071 (HC-20/70) Series (5) OPC202HV Series (6) Note (1) All values at Ta = 25C (2) The external resistor value must be chosed, based on the transmission distance. (3) Manufactured by Asahi Kasei EMD Corporation. (4) Manufactured by Toray Industries, Inc. (5) Manufactured by Sumitomo Electric Industries (SEI), Ltd. (6) Manufactured by Oki Electric Cable Co., Ltd. (7) For details on optical fiber cables with connectors, contact the respective manufactures. * Contact the Toshiba sales representative for information about RoHS compliance before you purchase any components. **: Under development (High-Speed Optical Modules) Data Rate (NRZ, Mb/s) Emission Wavelength (nm) Transmission Distance (1) (m) Supply Voltage (V) Operating Temperature (C) Compatible Optical Connector Compatible Optical Fiber (m) TODX2402(F) 20 to 250 650 Up to 50 (125M) Up to 20 (250M) 3.3 0.3 -10 to 70 (125M) 0 to 60 (250M) SMI APF (980/1000) NA = 0.3 LPG-Z0005P Series (13) TODX2701(F) 20 to 125 650 Up to 20 (APF) 3.3 0.3 -10 to 70 PN APF (980/1000) NA = 0.5 LUCT2-TC1000W-xxM (3) TOCP200-xxMBT (4) Transceiving Module Up to 100 (GI-PCF) GI-PCF (200/230) Compatible Optical Fiber (7) with Fiber-Optic Connectors CF-2071 (HC-20/80) Series (5) Note (1) All values at Ta = 25C (3) Manufactured by Asahi Kasei EMD Corporation. (4) Manufactured by Toray Industries, Inc. (5) Manufactured by Sumitomo Electric Industries (SEI), Ltd. (7) For details on optical fiber cables with connectors, contact the respective manufactures. (13) Manufactured by Honda Tsushin Kogyo Co., Ltd. * Contact the Toshiba sales representative for information about RoHS compliance before you purchase any components. 46 2010/8 SCE0004J Image Sensors CCD Linear Image Sensors Part Number TCD1103GFG TCD1254GFG TCD1706DG TCD1710DG TCD1711DG TCD2563BFG TCD2564DG TCD2565BFG TCD2709DG TCD2710DG TCD2712DG TCD2713DG TCD2715DG TCD2716DG TCD2717BFG TCD2915BFG TCD2916BFG TCD2964BFG Style Photosenstitive Pixels (Picture Elements) Type/Lamp B/W Effective Pixels Size (m) Sensitivity (Typ.) (V/lx * s) Data Rate (Max) (MHz) 1500 5.5 x 64 79 2 2500 5.25 x 64 103 2 15 25 x 4 4.7 x 4.7 15 15 x 2 15 30 x 2 5340 x 4 Line 5.25 x 8.4 R:22.6, G:28.0, B:17.0 Color:25, B/W:25 x 2 5400 x 3 Line 7x7 R:9.6, G:8.9, B:3.8 30 x 2 7500 x 4 Line 5.25 x 5.25 R:10.2, G:9.2, B:4.0, B/W:14.7 Color:35, B/W:35 x 2 7450 x 3 Line 4.7 x 4.7 R:5.7, G:5.2, B:2.2 25 x 2 7500 x 3 Line 9.325 x 9.325 R:9.3, G:14.5, B:4.8 30 x 2 7500 x 3 Line 9.325 x 9.325 R:14.1, G:22.2, B:9.1 30 x 4 7500 x 4 Line 9.325 x 9.325 R:13.1, G:18.4, B:7.6, B/W:23.8 Color:35 x 2, B/W:35 x 4 7450 x 3 Line 4.7 x 4.7 R:5.7, G:5.2, B:2.2 30 7450 x 3 Line 4.7 x 4.7 R:9.1, G:8.5, B:3.8 30 x 2 7500 x 4 Line 4.7 x 4.7 R:8.0, G:7.2, B:3.1 Color:35, B/W:35 x 2 R:5.6, G:7.0, B:4.3 20 R:6.7, G:7.0, B:4.3, B/W-H:17.4, B/W-H:11.3 Color:25, B/W:25 x 2 R:1.3, G:1.5, B:0.7 10 7400 7500 x 2 Line 7450 Lens reduction type Color Other Features 10680 x 3 Line 10680 x 4 Line 2.625 x 8.4 21360 x 6 Line 2x4 : Dry-packed * The products shown in bold are also manufactured in offshore fabs. * Contact the Toshiba sales representative for information about RoHS compliance before you purchase any components. Digital shutter Sample-and-hold TDI 2-line distance (color) 2-line distance (color) 2-line distance (color) Overflow drain *: New product Area Image Sensors (DynastronTM) Features Part Number Package Optical Format (Inches) Total Pixel Count (PIX) Color/Mono Digital Signal Processor TCM9001MD Camera module 1/10 648 (H) x 492 (V) (VGA) Color (RGB) Yes TCM9200MD Camera module 1/4 1648 (H) x 1216 (V) (2.0M) Color (RGB) Yes * Dynastron is a trademark of Toshiba Corporation. * Contact the Toshiba sales representative for information about RoHS compliance before you purchase any components. 47 2010/8 SCE0004J Package Resolution (DPI) 16PIN GLCC 22PIN Cerdip A3 600 Applications Remarks Barcode readers Photocopiers, scanners 22PIN CLCC 22PIN Cerdip A4 600 22PIN CLCC ES: OK 22PIN Cerdip 68PIN Cerdip A3 600 Photocopiers, color scanners 22PIN Cerdip 32PIN CLCC 22PIN CLCC A4 1200 32PIN CLCC A4 4800 Color scanners 48 2010/8 SCE0004J SUNSTAR 10 , IC /DOC/DOM MCU/DSP/ARM/FPGA ---- CADEDA CATV : VCOPIN MMIC DWDM / / : http://www.sensor-ic.com/ http://www.pc-ps.net/ http://www.sunstare.com/ :HTTP://www.rfoe.net/ ://www.icasic.com/ ://www.sunstars.cn/ 1602 0755-82884100 83397033 83396822 83398585 0755-83376182 013823648918 MSN: SUNS8888@hotmail.com 518033 E-mail:szss20@163.com QQ: 195847376 2583 0755-83665529 : 0755-83394033 13501568376