Featuring Radsok® Technology
eco|mate® rm
Rugged Metal Shielded Connectors
RELIABLE SIGNAL AND POWER SOLUTIONS
www.amphenol-sine.com | +1 800 394 7732
© 2015 Amphenol Si ne Systems Corporation. Ever y effor t has been made to ensure that the information conta ined in th is document is accurate at the ti me of publication.
Specications or information stated in this document are subject to change without notice. www.amphenol-sine.com +1 800 394 7732
2
ABOUT AMPHENOL
For over 80 years Amphenol has enjoyed success as the interconnection technology
provider of choice to industry leading companies around the world. Our organization
works with leading manufacturers across a wide range of applications - including
Energy Generation & Distribution, Transportation, Heavy Equipment, Factory
Automation, Wireless Outdoor, Information Technology and Data Communications
Equipment, Mobile Devices, Mobile Networks, Broadband Communication, Military
and Commercial Aerospace, Industrial, Automotive and Chip Card Readers - enabling
smarter, faster and better technologies to connect products to customer solutions.
Our engineers design innovative combinations of industry standard connectors
and application specic shielding components to create assembly systems that set
the standards for performance, reliability, and cost effectiveness. Our engineering,
materials, and manufacturing organizations meet the high standards imposed by ISO
9001:2008 as well as many customer specic quality systems. Our performance has
earned us ship to stock and world class performance awards from many major OEMs.
We are one of the largest interconnect solution suppliers in the world and supply a
wide range of product solutions globally. The industrial market footprint of Amphenol
covers more than 30 countries.
We Are Amphenol
Global Interconnect Solution Supplier
3
Table of Contents
We Are Amphenol
Global Interconnect Solution Supplier ________________________________________________________________ 3
Connector Guide
Introduction to eco|mate® rm ______________________________________________________________________ 6
Typical Applications _________________________________________________________________________________ 7
Series Overview _____________________________________________________________________________________ 8
Connector Congurations __________________________________________________________________________10
Insert Arrangements ________________________________________________________________________________12
General Technical Characteristics __________________________________________________________________14
GuardSafe™ Locking Clips _________________________________________________________________________16
Connector Kits _____________________________________________________________________________________17
Connector Solutions
1 POSITION 86A / 630V _____________________________________________________________________________179
1 POSITION 120A / 630V ____________________________________________________________________________183
1 POSITION 120A - 180A / 630V _____________________________________________________________________187
1 POSITION 120A - 300A / 630V _____________________________________________________________________191
3 POSITIONS 13A / 300V _____________________________________________________________________________21
3 POSITIONS 86A / 630V ____________________________________________________________________________197
4 POSITIONS 13A / 300V _____________________________________________________________________________29
4 POSITIONS 23A / 350V _____________________________________________________________________________55
4 POSITIONS 45A / 500V _____________________________________________________________________________63
4 POSITIONS MIX 13A & 5A / 350V ___________________________________________________________________37
4 POSITIONS MIX 23A &13A / 350V ___________________________________________________________________47
6 POSITIONS 5A, 7.5A/ 150V _________________________________________________________________________71
8 POSITIONS 13A / 250V _____________________________________________________________________________79
8 POSITIONS 13A / 300V _____________________________________________________________________________87
8 POSITIONS 23A / 375V _____________________________________________________________________________95
9 POSITIONS MIX 23A & 13A / 250V _________________________________________________________________103
10 POSITIONS 5A, 7.5A / 150V ______________________________________________________________________111
12 POSITIONS 13A / 300V ___________________________________________________________________________119
19 POSITIONS 5A, 7.5A / 150V ______________________________________________________________________127
19 POSITIONS 13A / 300V ___________________________________________________________________________135
23 POSITIONS 13A / 300V ___________________________________________________________________________143
26 POSITIONS 5A, 7.5A / 150V ______________________________________________________________________151
28 POSITIONS 13A / 300V ___________________________________________________________________________159
32 POSITIONS 5A,7.5A / 150V _______________________________________________________________________167
48 POSITIONS 13A / 300V ___________________________________________________________________________175
Contacts
Contact Overview ________________________________________________________________________________200
Plating and Bulk Order Options _____________________________________________________________________201
Stamped & Formed Crimped Contact Part Numbers ________________________________________________ 202
PCB Contacts _____________________________________________________________________________________204
PCB Contacts Dimensions _________________________________________________________________________ 206
Machined Standard Crimp Contact Part Numbers __________________________________________________207
RADSOK® Contacts _______________________________________________________________________________ 209
eco |mate® rm
Rugged Metal Shielded Connectors
4
Tooling
Machined ________________________________________________________________________________________212
Stamped & Formed _______________________________________________________________________________212
Contact Extraction Tool ___________________________________________________________________________212
Contact Extraction Tool Table ______________________________________________________________________213
Contact Extraction Tool Instruction _________________________________________________________________214
Assembly Instructions
Jam Nut Assembly and Installation Instructions ______________________________________________________215
Flange Assembly and Installation Instructions _______________________________________________________216
eco|mate® rm Standard Product Straight Plug and Receptacle Cable Assembly ____________________217
eco|mate® rm Standard Product Straight Plug and Receptacle with End Cap _______________________219
eco|mate® rm Standard Product Right Angle Plug and Receptacle Cable Assembly _________________220
eco|mate® rm with RADSOK® Straight Plug Cable Assembly ________________________________________ 222
eco|mate® rm with RADSOK® Straight Plug - Shell Size 12 Cable Assembly ___________________________223
eco|mate® rm with RADSOK® 90° Plug Cable Assembly ____________________________________________224
Technical Data
RADSOK® Product Overview _______________________________________________________________________226
RADSOK® Advantages and Custom Developed Solutions ___________________________________________227
RADSOK® Series Rated Current and Working Voltage ______________________________________________ 228
RADSOK® Series Dynamic Overload Tests at Different Temperatures _________________________________229
eco|mate® rm Rated Current and Working Voltage _______________________________________________230
UL94 + UL1977 Industry Standards __________________________________________________________________231
IP Codes __________________________________________________________________________________________232
Crimp Connection ________________________________________________________________________________233
Composition and Dimensions of Copper Wires ______________________________________________________234
Reduction Values _________________________________________________________________________________235
Voltage Grading of Connectors ___________________________________________________________________ 236
Creepage Distance _______________________________________________________________________________237
Appendix
Glossary of Terms __________________________________________________________________________________239
Part Number Index ________________________________________________________________________________241
Table of Contents (con’t)
Table of Contents
5
Introduction to eco |mate® rm
Connector Guide
Waterproof
Corrosion Resistant
Quick Reliable Mating
Economical and Flexible
IP67
Ideal for temporary submersion, (acheiving IP67) where water and dust protection
are needed.
Salt Spray Standard Nickel 48 Hours, Black or Green Zinc 96 Hours
Designed to withstand climate ingress and exposure to salt spray or a corrosive
atmosphere while still maintaining mechanical and electrical functionality.
Bayonet Coupling
With a quick twist of the bayonet coupling system, these connectors provide positive
tactile feedback to insure condent mating. This feature also reduces time and labor
during installation.
Mixed Power & Signal Layouts
Power and signal contacts can be combined in a variety of inserts providing a highly
exible interconnect solution to reduce system complexity and minimize installation costs.
Wide Ranging Contact System
Flexible Contact Solutions
Our contact system offers the exibility of using a wide variety of contact styles and wire
gauges within various connectors, shell sizes and insert layouts, providing customers with
a total solution.
6
Introduction to eco |mate® rm
Typical Applications
Energy - Power
Robotics - Machine Tools Building Automation & Control
Instrumentation Measurement
Off Road - Mining - Railway
Welding
Aerospace Military
Telecom -Data Infrastructure
Automotive
Medical
Electric Vehicles
eco |mate® rm
Rugged Metal Shielded Connectors
Connector Guides
7
eco|mate® rm
Rugged Metal Shielded Connectors
The eco|mate ® r m ser ies is the connecto r
of choice wherever there are demanding
interconnect architectures. The multi-
way connectors are available in 7 shell
sizes and 25 insert arrangements with a
variety of wire gauge options. It is the high
performance, cost effective solution of
choice for our customers.
The series includes two kinds of
connectors: Standard Products and
High Amperage. Standard Products are
widely used, standardized connectors,
while the High Amperage connectors
are designed to endure large currents
and high voltage. Typically used within
hybrid electric vehicles, High Amperage
connectors are available in single pole,
high power arrangements featuring
RADSOK® technology. RADSOK® products
are offered exclusively by Amphenol.
Custom developed solutions are av ailable
in both styles.
Our eco|mate®r m p r o d u c t s a r e d e s i g n e d
to be a competitive alternative to other
industry sta nd ar d produc ts while
maintaining the best possible mechanical
and environmental quality on the market.
Our eco|mate® rm products feature IP67
environmental sealing qualities, rugged
nickel plated aluminum outer shells and
bayonet locking systems that require
only a 1/3 turn. An audible locking “click”
indicates proper installation.
The versatility of having three available
contact styles allows for a broad variety
of insert arrangements.
• Machined
• Stamped & Formed
• Power
The eco|mate® rm Standard Product is our
standard rugged metal shielded circular
connector series available in 7 shell sizes
and multiple insert arrangements.
The high amperage eco|mate® rm with
RADSOK® technology is our single pole
power connector series ranging from 86A
to 300A.
eco|mate®r m i n d u s t r i a l g r a d e c i r c u l a r
connectors are manufactured to be
intermateable with other industry
standard connectors. All connectors
are RoHS compliant. The eco|mate® rm
Series meets the standards of UL1977. The
le number is E339831.
High Performance Cost Effective Rugged Metal Shielded Connectors
Series Overview
8
eco|mate® rm
Rugged Metal Shielded Connectors
High Amperage eco|mate® rm
with RADSOK® Technology
• Single Pole High Power Arrangements
• 3.6mm-10mm Contact Sizes
• Operating Temperature: -40°C to +125°C
• RoHS Compliant
• 4 Shell Sizes
• Operating Voltage: 630V
• Current Rating at 25°C: 86A-300A
• Flammability Rating: UL94-V0
• High Reliability
• Low Contact Engagement / Separation Forces
• Low Contact Resistance
• High Mating Cycle Durability
eco|mate® rm High Amperage Products
starting on page 179
High Performance Cost Effective Rugged Metal Shielded Connectors
Connector Guide
eco|mate® rm
Standard Products
• Suitable For Indoor and Outdoor Applications
• EMI/RMI Shielding Capability with Appropriate Backshell
• Operating Temperature: -40°C to +105°C
Operating Temperature: -40°C to +125°C
(for parts with a silicone seal, ending in 03)
• 500 Mating Cycles
• Contacts and Cord Grips Ordered Separately
• High-Density Contact Arrangements Available
• UL ECBT2 Certied
eco|mate® rm Standard Products
starting on page 21
9
Connector Congurations
eco|mate® rm Series
Plug Kit includes Connector,
Backshell and Contacts
eco |mate® rm
Rugged Metal Shielded Connectors
End Cap for
Individual Wire
Sealing
Short Cable
Gland
Choice of Contacts
• Machined
• Stamped and Formed Plug
Choice of Contacts
• Machined
• Stamped and Formed
Long Cable
Gland
Right Angle
Cable Gland
Overmolded
10
Custom Solutions Available For:
• Various Applications
• Extreme Environments
• Reducing the Number of Suppliers
• Molded Strain Relief
• Minimize Stress on Conductors
• 360 ° Shielding Available
• Custom Logo
• Enhanced Sealing Properties
Contact the Factory to learn more
Connector Guides
End Cap for
Individual Wire
Sealing
Short Cable
Gland
Choice of Contacts
• Machined
• Stamped and Formed Plug
Choice of Contacts
• Machined
• Stamped and Formed
Long Cable
Gland
Right Angle
Cable Gland
Overmolded
End Cap for Individual
Wire Sealing
eco|mate® rm Series
Receptacle Kit includes
Receptacle, Gasket
& Contacts
Wall Mounted
Jam Nut
Connector Solutions:
see page 19 for parts grouped by insert arrangement
Connector Guide
Receptacle
Choices
Faceview
11
Insert Arrangements
RT0 RTHP
Shell
Size Contact #16 (Ø 1.6) Mixed Power & Signal Contact 2.5mm Contact #20
(Ø 1.0)
Single Pin Power
RADSOK®
10 4 positions
Contact #16 (Ø 1.6)
13A 300V
see page 29
Consult factory Consult factory
4 positions
Contact #16 (Ø 1.6)
& #20 (Ø 1.0)
13A & 20# 5A
350V AC/DC
see page 37
6 positions
Contact #20 (Ø 1.0)
5A, 7A(machined)
150V
see page 71
12 Consult factory Consult factory
3 positions
Contact #16
(Ø 1.6)
13A 300V
see page 21
8 positions
Contact
#16 (Ø 1.6)
13A 300V
see page 79
10 positions
Contact #20 (Ø 1.0)
5A, 7.5A(machined)
150V
see page 111
1 position
Contact 3.6mm
86A 630V AC/DC
see page 179
14
Consult factory Consult factory
8 positions
Contact
#16 (Ø 1.6)
13A
300V AC/DC
page 87
12 positions
Contact
#16 (Ø 1.6)
13A 300V
see page 119
4 positions
Contact 2.5mm
#16 (Ø 1.6)
23A &13A
350V AC/DC
see page 47
4 positions
Contact 2.5mm
23A
350V AC/DC
see page 55
19 positions
Contact #20 (Ø 1.0)
5A, 7.5A(machined)
150V
see page 127
1 position
Contact 6mm
120A
630V AC/DC
see page 183
16 Consult factory
19 positions
Contact
# 16 (Ø 1.6)
13A 300V
see page 135
4 positions
Contact
#8 (Ø 3.6)
45A
500V AC/DC
see page 63
9 positions
Contact
2.5mm &
# 16 (Ø 1.6)
23A & 13A
350V AC/DC
see page 103
26 positions
Contact #20 (Ø 1.0)
5A, 7.5A(machined)
150V
see page 151
1 position
Contact 8mm
120A - 180A
630V AC/DC
see page 187
eco |mate® rm
Rugged Metal Shielded Connectors
12
Connector Guides
RT0 RTHP
Shell
Size Contact #16 (Ø 1.6) Mixed Power & Signal Contact 2.5mm Contact #20
(Ø 1.0) or
Contact 3.6mm
Single Pin Power
RADSOK®
18 Consult factory Consult factory
23 positions
Contact #16 (Ø 1.6)
13A 300V
see page 143
8 positions
Contact 2.5mm
23A 375V AC/DC
see page 95
32 positions
Contact #20 (Ø 1.0)
5A, 7.5A 150V
see page 167
20 Consult factory Consult factory
3 positions
Contact 3.6mm
86A 630V
see page 197
1 position
Contact 10mm
120A - 300A 630V
see page 191
28 positions
Contact #16 (Ø 1.6)
13A 300V
see page 159
24 Consult factory Consult factory Consult factory Consult factory
48 positions
Contact #16 (Ø 1.6)
13A 300V
see page 177
Connector Guide
RTHP
Insert Arrangements are Pin Faceview
13
General Technical Characteristics
Materials
• Zinc Alloy Shells
• Metal Alloy Backshells and
Cable Glands
• Aluminum Alloy, Nickel Plated
Coupling Ring
• Stainless Steel Coupling Spring
• Contacts Plating Options
Gold Flash over Tin
Tin
Silver
5µ, 10µ, 15µ, 30µ
Gold Flash
Other platings on request
• Insulation Resistance
5000 megohms minimum of 25° C
• Insulation Inserts
Thermoplastic, UL94 V-0
Environmental
• IP67
• Operating Temperature
-40° to 105° C - Standard Products
with NBR Seal
-40° to 125° C -Standard Products
with Silicone Seal
-40° to 125° C -High Amperage Products
with RADSOK® technology
• Flammability Rating UL94 V-0
• Salt Spray
Per MIL-STD-202 method 101
-48 h ( standard version)
-96 h (black anodized coupling ring)
Higher salt spray resistance (200/500h)
upon request
• Sealing
In mated condition and in combination
with sealed backshell
• Fluid Resistance
Gas, oil, mineral oil, acid bath,
basic bath
eco |mate® rm
Rugged Metal Shielded Connectors
14
Electrical
• In Accordance With
UL 1977: Certicate ECBT2
File number: E339831
• More information
see “Technical Section” starting on
page 228
Mechanical
• Durability
RT Series : >500 mating cycles
RTHP Series: >100 mating cycles
• Vibration
10-2000 Hz, level of 20 G’s
• Thermal Shock
No cracking, chipping or leaking after 20
test cycles from -55°C to 125°C
• Contact Resistance
#16 <6 mΩ
#20 <15 mΩ
eco|mate® rm with RADSOK® < 1m Ω
Connector Guide
Connector Guides
15
GuardSafe™ Locking Clips
GuardSafe™ Locking Clips
Amphenol’s GuardSafe™ Locking Clips are designed to complement the eco|mate® rm multi-way
connector and Amphenol PT\26482 Series cylindrical metal bayonet coupling systems, and are suitable
for many rough, harsh environmental applications. Featuring non-corrosive, plastic construction with
clamshell functionality, they are resistant to brake and transmission uid, oils, grease, salt, dirt and other
contaminants. Compliant with new FM standards, the GuardSafe™ Locking Clip offers an extra layer of
protection from an inadvertent uncoupling of the connector.
Cost Effective Safety Protection
GuardSafe™ Locking Clips render quick disconnections
not “normally arching” by eliminating access to the
coupling nut and requiring a tool for removal.
Easy to Use
User-friendly, easy to install and service.
Suitability
GuardSafe™ Locking Clips are suitable to be used with
wiring methods in accordance with Class I, Division 2
wiring practices per the National Electric Code (NEC),
ANSI,\NFPA 70, Article 501.4(B).
Installation:
Locate the clip over the connector
coupling nut with the lanyard towards
the plug adapter as shown. Close the
safety clip.
Removal:
Locate a screwdriver on rst latch as
shown. Push down the latch then twist
the screwdriver. Repeat actions for
second latch.
Locking Clips are also Compatible with
Amphenol PT\26482 Series Cylindrical
Metal Bayonet Coupling Systems!
Go to www.amphenol-sine.com
for more information about the PT Series
eco|mate® rm
Shell Size Part #
10 108039110
12 108039112
14 108039114
16 108039116
18 108039118
20 108039120
22 108039122
24 108039124
Connector Guide
16
Connector Guide
Connector Kits
Q: Why are we offering “kits”?
A: Making “kits” available to our customers
allows for reducing the number of part
numbers necessary for any given project,
whether for in-house production or eld
serviceable applications.
Amphenol’s eco|mate® rm Rugged Metal
Shielded Connector Kits offer mated mult i-
way connector parts available in 6 shell sizes
and 12 insert arrangements, with a variety
of wire gauge options. eco|mate® rm
industrial circular connectors are designed
to be intermateable with other industry
standard connectors. All connectors are
RoHS compliant.
Market Applications:
• Instrumentation Measurement
• Robotics
• Machine Tools
• Building Automation & Control
• Telecom - Data Infrastructure
• Welding
• Medical
• Aerospace
• Energy Power
• Military
• Automotive
• Off Road
• Mining
• Railway
• Electric Vehicles
eco|mate® rm Kits
• 6 shell sizes/12 insert congurations
• Insert arrangements from 4-32 contacts
• Operating voltage of 150V or 300V
• Current rating: 5A, 7.5A(machined)
or 13A (signal contacts)
• Alternate keying positions available
• Plastic inserts with ammability rating
of UL94-V0
Plug Kit
Including Connector, Backshell & Contacts
Jam Nut
Receptacle Kit
Including Receptacle
& Contacts
Square Flange
Receptacle Kit
Including Receptacle,
Gasket
& Contacts
Connector Guides
17
18
Connector Solutions
eco|mate® rm Standard Products
3 POSITIONS 13A / 300V _____________________________________________________________________________21
4 POSITIONS 13A / 300V _____________________________________________________________________________29
4 POSITIONS MIX 13A & 5A / 350V ___________________________________________________________________37
4 POSITIONS MIX 23A &13A / 350V ___________________________________________________________________47
4 POSITIONS 23A / 350V _____________________________________________________________________________55
4 POSITIONS 45A / 500V _____________________________________________________________________________63
6 POSITIONS 5A / 150V ______________________________________________________________________________71
8 POSITIONS 13A / 250V _____________________________________________________________________________79
8 POSITIONS 13A / 300V ____________________________________________________________________________87
8 POSITIONS 23A / 375V _____________________________________________________________________________95
9 POSITIONS MIX 23A & 13A / 250V _________________________________________________________________103
10 POSITIONS 5A, 7.5A/ 150V _______________________________________________________________________111
12 POSITIONS 13A / 300V ___________________________________________________________________________119
19 POSITIONS 5A, 7.5A/ 150V _______________________________________________________________________127
19 POSITIONS 13A / 300V ___________________________________________________________________________135
23 POSITIONS 13A / 300V ___________________________________________________________________________143
26 POSITIONS 5A, 7.5A / 150V ______________________________________________________________________151
28 POSITIONS 13A / 300V ___________________________________________________________________________159
32 POSITIONS 5A, 7.5A / 150V ______________________________________________________________________167
48 POSITIONS 13A / 300V ___________________________________________________________________________175
High Amperage eco|mate® rm with RADSOK® Technology
1 POSITION 86A / 630V _____________________________________________________________________________179
1 POSITION 120A / 630V ____________________________________________________________________________183
1 POSITION 120A - 180A / 630V _____________________________________________________________________187
1 POSITION 120A - 300A / 630V _____________________________________________________________________191
3 POSITIONS 86A / 630V ____________________________________________________________________________197
Eco|mate® rm™ Connector Solutions
eco |mate® rm
Rugged Metal Shielded Connectors
Connector Solutions
19
Backshell
Jam Nut Receptacles
Plug
Square Flange
Receptacles
STEP 1
Choose Receptacle Style
OR
STEP 2
Choose Plug Style
S
TEP 2
Choose Backshell Style
Plug Kit Including Connector,
Backshell & Contacts
CONTACTS SOLD SEPARATELY SEE PAGE 26
SEE TABLE ON NEXT PAGE FOR PART DETAILS
Square Flange
Receptacle Kit Including
Receptacle,Gasket
& Contacts
Jam Nut Receptacle Kit
Including Receptacle
& Contacts
RT0S12CGNS1
RT0S12CGNS2
RT0L12CGNS1
RT0L12CGNS2
RT0B12CGNS1
RT0B12CGNS2
RT07123PNH
RT07123SNH
RT07123PNHEC
RT07123SNHEC
RT06123PNH
RT06123SNH
RT06123PNHEC
RT06123SNHEC
RT00123PNH
RT00123SNH
RT00123PNHEC
RT00123SNHEC
OR
An upgraded silicone seal is available for all connector parts. When ordering, please
add “03” to the end of the part number. Operating Temperature: -40°C to +125°C
20
Connector Solutions
3 POSITIONS
13A / 300V
Insert Arrangement
Pin (Male) Faceview
Connector Part Numbers
Part Number Connector Type Figure Drawings
Male Female Male Female
RT07123PNH RT07123SNH Jam Nut Receptacle 1,5 2,5
RT07123PNHEC RT07123SNHEC Jam Nut Receptacle with O-ring Seal and
End Cap with Individual Rear Wire Seal** 3,5 4,5
RT07123PNHK RT07123SNHK Jam Nut Receptacle Kit 1,5 2,5
RT06123PNH RT06123SNH Plug 6 7
RT06123PNHEC RT06123SNHEC Plug with O-ring Seal and End Cap with
Individual Rear Wire Seal** 8 9
RT06123PNHK RT06123SNHK Plug Kit 6 7
RT00123PNH RT00123SNH Square Flange Receptacle 10,14 11,14
RT00123PNHEC RT00123SNHEC Square Flange Receptacle with O-ring
Seal and End Cap with Individual
Rear Wire Seal** 12,14 13,14
RT00123PNHK RT00123SNHK Square Flange Receptacle Kit 10,14 11,14
Contacts supplied separately see page 26
**See page 23 for the real seal wire range
Backshells
Part Number Backshell Type Cable Range (mm) Figure Drawings Shielding
RT0S12CGNS1 Short Cord Grip (straight) 6-10.5 15
RT0S12CGNS2 Short Cord Grip (straight) 8.5-12.5 15
RT0L12CGNS1 Long Cord Grip (straight) 6-10.5 16
RT0L12CGNS2 Long Cord Grip (straight) 8.5-12.5 16
RT0B12CGNS1 Cord Grip (90°) 6-10.5 17
RT0B12CGNS2 Cord Grip (90°) 8.0-12.5 17
Shell Size: 12 Number of Contacts: 3 Contact Size: 16
Sealing: IP67 Salt Spray: 48h
*Connector parts with part numbers ending in EC (with an end cap) were not available for submittal at the time of UL certication.
eco|mate® rm
Standard Products
• Suitable For Indoor and Outdoor Applications
• EMI/RMI Shielding Capability with Appropriate Backshell
• Operating Temperature: -40°C to +105°C
• 500 Mating Cycles
• Contacts and Cord Grips Ordered Separately
• UL ECBT2 Certied*
An upgraded silicone seal is available for all connector parts.
Please add “03” to the end of the part number when ordering.
Operating Temperature: -40°C to +125°C. Not available in kits.
21
Dimensions Jam Nut Receptacle
Shell Size: 12 Number of Contacts: 3 Contact Size: 16
Sealing: IP67 Salt Spray: 48h
Jam Nut Receptacle Panel Cutout
Figure 5
Jam Nut Receptacle
Figure 1 Male RT07123PNH
Jam Nut Receptacle
Figure 2 Female RT07123SNH
Jam Nut Receptacle with O-ring Seal and
End Cap with Individual Rear Wire Seal
Figure 3 Male RT07123PNHEC
Jam Nut Receptacle with O-ring Seal and
End Cap with Individual Rear Wire Seal
Figure 4 Female RT07123SNHEC
22
Connector Solutions
Dimensions Plug
Shell Size: 12 Number of Contacts: 3 Contact Size: 16
Sealing: IP67 Salt Spray: 48h
3 POSITIONS
13A / 300V
Plug
Figure 6 Male RT06123PNH
Plug
Figure 7 Female RT06123SNH
Plug with O-ring Seal and End Cap
with Individual Rear Wire Seal
Figure 8 Male RT06123PNHEC
Plug with O-ring Seal and End Cap
with Individual Rear Wire Seal
Figure 9 Female RT06123SNHEC
Individual Sealing Wire Range
Contact Size Insulation Overall Diameter (min-max) Wire Range
16 Ø2.0mm - Ø3.2mm 14 - 24 AWG
23
Dimensions Square Flange Receptacle
Shell Size: 12 Number of Contacts: 3 Contact Size: 16
Sealing: IP67 Salt Spray: 48h
Square Flange Receptacle Panel Cutout
Figure 14
Square Flange Receptacle
Figure 10 Male RT00123PNH
Square Flange Receptacle
Figure 11 Female RT00123SNH
Square Flange Receptacle with O-ring Seal and
End Cap with Individual Rear Wire Seal
Figure 12 Male RT00123PNHEC
Square Flange Receptacle with O-ring Seal and
End Cap with Individual Rear Wire Seal
Figure 13 Female RT00123SNHEC
24
Connector Solutions
Dimensions Backshell
Shell Size: 12 Number of Contacts: 3 Contact Size: 16
Sealing: IP67 Salt Spray: 48h
3 POSITIONS
13A / 300V
Short Cord Grip (straight)
Figure 15
Long Cord Grip (straight)
Figure 16
Cord Grip (90°)
Figure 17
Accessories
Locking Clip with Lanyard
108039112
Plug Dustcap with Chain
RT612DCG
Plug Dustcap without Chain
RT612DC
Receptacle Dustcap with Chain
RT012DCG
Receptacle Dustcap with Nylon
Cord, Made of Rubber
RT012RL
Receptacle Dustcap without
Chain
RT012DC
Receptacle Dustcap without
Nylon Cord, Rubber Material
RB00011912
Sealing Plug
CA401659
Square Flange Receptacle
Gaskets, Thickness 0.8mm (±0.2)
RTFD12B
NEW!
See
Page
16
25
Shell Size: 12 Number of Contacts: 3 Contact Size: 16
Sealing: IP67 Salt Spray: 48h
Contacts
Crimp Contacts, Machined
Part Number AWG Wire
Range
(mm²)
Plating
Male Female
MP14M23F MS14M23F 14 2.0-2.5 Gold Flash
MP14M23G5 MS14M23G5 14 2.0-2.5 Gold 5µ”
MP14M23G10 MS14M23G10 14 2.0-2.5 Gold 10µ”
MP14M23G15 MS14M23G15 14 2.0-2.5 Gold 15µ”
MP14M23G30 MS14M23G30 14 2.0-2.5 Gold 30µ”
MP16M23F MS16M23F 18-16 .75-1.5 Gold Flash
MP16M23G5 MS16M23G5 18-16 .75-1.5 Gold 5µ”
MP16M23G10 MS16M23G10 18-16 .75-1.5 Gold 10µ”
MP16M23G15 MS16M23G15 18-16 .75-1.5 Gold 15µ”
MP16M23G30 MS16M23G30 18-16 .75-1.5 Gold 30µ”
MP20M23F MS20M23F 22-20 .34-.50 Gold Flash
MP20M23G5 MS20M23G5 22-20 .34-.50 Gold 5µ”
MP20M23G10 MS20M23G10 22-20 .34-.50 Gold 10µ”
MP20M23G15 MS20M23G15 22-20 .34-.50 Gold 15µ”
MP20M23G30 MS20M23G30 22-20 .34-.50 Gold 30µ”
MP24M23F MS24M23F 26-24 .14-.25 Gold Flash
MP24M23G5 MS24M23G5 26-24 .14-.25 Gold 5µ”
MP24M23G10 MS24M23G10 26-24 .14-.25 Gold 10µ”
MP24M23G15 MS24M23G15 26-24 .14-.25 Gold 15µ”
MP24M23G30 MS24M23G30 26-24 .14-.25 Gold 30µ”
Machined Contacts
Tools
Contact Extraction Tool,
#16 (Ø 1.6) Contact
QXRT16
Hand Crimp Tool for
Machined Contacts
MFX-3959
Pneumatic Crimp Tool for
Machined Contacts
MFX-3960
26
Connector Solutions
3 POSITIONS
13A / 300V
Shell Size: 12 Number of Contacts: 3 Contact Size: 16
Sealing: IP67 Salt Spray: 48h
Contacts (con’t)
SP14M1F SS14M1F 14 2.0-2.5 Gold Flash
SP14M1G5 SS14M1G5 14 2.0-2.5 Gold 5µ”
SP14M1G10 SS14M1G10 14 2.0-2.5 Gold 10µ”
SP14M1G15 SS14M1G15 14 2.0-2.5 Gold 15µ”
SP14M1G30 SS14M1G30 14 2.0-2.5 Gold 30µ”
SP16M1F SS16M1F 18-16 .75-1.5 Gold Flash
SP16M1G5 SS16M1G5 18-16 .75-1.5 Gold 5µ”
SP16M1G10 SS16M1G10 18-16 .75-1.5 Gold 10µ”
SP16M1G15 SS16M1G15 18-16 .75-1.5 Gold 15µ”
SP16M1G30 SS16M1G30 18-16 .75-1.5 Gold 30µ”
SP20M1F SS20M1F 22-20 .34-.50 Gold Flash
SP20M1G5 SS20M1G5 22-20 .34-.50 Gold 5µ”
SP20M1G10 SS20M1G10 22-20 .34-.50 Gold 10µ”
SP20M1G15 SS20M1G15 22-20 .34-.50 Gold 15µ”
SP20M1G30 SS20M1G30 22-20 .34-.50 Gold 30µ”
SP24M1F SS24M1F 22-20 .14-.25 Gold Flash
SP24M1G5 SS24M1G5 26-24 .14-.25 Gold 5µ”
SP24M1G10 SS24M1G10 26-24 .14-.25 Gold 10µ”
SP24M1G15 SS24M1G15 26-24 .14-.25 Gold 15µ”
SP24M1G30 SS24M1G30 26-24 .14-.25 Gold 30µ”
Crimp Contacts, Stamped & Formed
Part Number AWG Wire
Range
(mm²)
Plating
Male Female
Stamped & Formed Contacts
Contact Extraction Tool,
#16 (Ø 1.6) Contact
QXRT16
Crimp Die for Stamped &
Formed Contact
MFX-3957
Hand Tool, Stamped & Formed
Contact, Size 16, 20-14AWG
MFX-3954
Tools
27
Backshell
Jam Nut Receptacles
Plug
Square Flange
Receptacles
STEP 1
Choose Receptacle Style
OR
STEP 2
Choose Plug Style
S
TEP 2
Choose Backshell Style
Plug Kit Including Connector,
Backshell & Contacts
CONTACTS SOLD SEPARATELY SEE PAGE 34
SEE TABLE ON NEXT PAGE FOR PART DETAILS
Square Flange
Receptacle Kit Including
Receptacle,Gasket
& Contacts
Jam Nut Receptacle Kit
Including Receptacle
& Contacts
RT0S10CGNS1
RT0S10CGNS2
RT0L10CGNS1
RT0L10CGNS2
RT07104PNH
RT07104SNH
RT07104PNHEC
RT07104SNHEC
RT06104PNH
RT06104SNH
RT06104PNHEC
RT06104SNHEC
RT00104PNH
RT00104SNH
RT00104PNHEC
RT00104SNHEC
OR
28
Connector Solutions
4 POSITIONS
13A / 300V
Insert Arrangement
Pin (Male) Faceview
Connector Part Numbers
Part Number Connector Type Figure Drawings
Male Female Male Female
RT07104PNH RT07104SNH Jam Nut Receptacle 1,5 2,5
RT07104PNHEC RT07104SNHEC Jam Nut Receptacle with O-ring Seal and
End Cap with Individual
Rear Wire Seal** 3,5 4,5
RT07104PNHK RT07104SNHK Jam Nut Receptacle Kit 1,5 2,5
RT06104PNH RT06104SNH Plug 6 7
RT06104PNHEC RT06104SNHEC Plug with O-ring Seal and
End Cap with Individual Rear Wire Seal** 8 9
RT06104PNHK RT06104SNHK Plug Kit 6 7
RT00104PNH RT00104SNH Square Flange Receptacle 10,14 11,14
RT00104PNHEC RT00104SNHEC Square Flange Receptacle with O-ring
Seal and End Cap with
Individual Rear Wire Seal** 12,14 13,14
RT00104PNHK RT00104SNHK Square Flange Receptacle Kit 10,14 11,14
Contacts supplied separately see page 34
**See page 31 for the real seal wire range
Backshells
Part Number Backshell Type Cable Range (mm) Figure Drawings Shielding
RT0S10CGNS1 Short Cord Grip (straight) 3-6.5 15
RT0S10CGNS2 Short Cord Grip (straight) 5-8.5 15
RT0L10CGNS1 Long Cord Grip (straight) 3-6.5 16
RT0L10CGNS2 Long Cord Grip (straight) 5-8.5 16
Shell Size: 10 Number of Contacts: 4 Contact Size: 16
Sealing: IP67 Salt Spray: 48h
*Connector parts with part numbers ending in EC (with an end cap) were not available for submittal at the time of UL certication.
An upgraded silicone seal is available for all connector parts.
Please add “03” to the end of the part number when ordering.
Operating Temperature: -40°C to +125°C. Not available in kits.
eco|mate® rm
Standard Products
• Suitable For Indoor and Outdoor Applications
• EMI/RMI Shielding Capability with Appropriate Backshell
• Operating Temperature: -40°C to +105°C
• 500 Mating Cycles
• Contacts and Cord Grips Ordered Separately
• UL ECBT2 Certied*
29
Dimensions Jam Nut Receptacle
Shell Size: 10 Number of Contacts: 4 Contact Size: 16
Sealing: IP67 Salt Spray: 48h
Jam Nut Receptacle Panel Cutout
Figure 5
Jam Nut Receptacle
Figure 1 Male RT07104PNH
Jam Nut Receptacle
Figure 2 Female RT07104SNH
Jam Nut Receptacle with O-ring Seal and
End Cap with Individual Rear Wire Seal
Figure 3 Male RT07104PNHEC
Jam Nut Receptacle with O-ring Seal and
End Cap with Individual Rear Wire Seal
Figure 4 Female RT07104SNHEC
30
Connector Solutions
Dimensions Plug
Shell Size: 10 Number of Contacts: 4 Contact Size: 16
Sealing: IP67 Salt Spray: 48h
4 POSITIONS
13A / 300V
Plug
Figure 6 Male RT06104PNH
Plug
Figure 7 Female RT06104SNH
Plug with O-ring Seal and End Cap with
Individual Rear Wire Seal
Figure 8 Male RT06104PNHEC
Plug with O-ring Seal and End Cap with
Individual Rear Wire Seal
Figure 9 Female RT06104SNHEC
Individual Sealing Wire Range
Contact Size Insulation Overall Diameter (min-max) Wire Range
16 Ø2.0mm - Ø3.2mm 14 - 24 AWG
31
Dimensions Square Flange Receptacle
Shell Size: 10 Number of Contacts: 4 Contact Size: 16
Sealing: IP67 Salt Spray: 48h
Square Flange Receptacle Panel Cutout
Figure 14
Square Flange Receptacle
Figure 10 Male RT00104PNH
Square Flange Receptacle
Figure 11 Female RT00104SNH
Square Flange Receptacle with O-ring Seal and
End Cap with Individual Rear Wire Seal
Figure 12 Male RT00104PNHEC
Square Flange Receptacle with O-ring Seal and
End Cap with Individual Rear Wire Seal
Figure 13 Female RT00104SNHEC
32
Connector Solutions
Dimensions Backshell
Shell Size: 10 Number of Contacts: 4 Contact Size: 16
Sealing: IP67 Salt Spray: 48h
4 POSITIONS
13A / 300V
Short Cord Grip (straight)
Figure 15
Long Cord Grip (straight)
Figure 16
Locking Clip with Lanyard
108039110
Plug Dustcap with Chain
RT610DCG
Plug Dustcap without Chain
RT610DC
Receptacle Dustcap with Chain
RT010DCG
Receptacle Dustcap with Nylon
Cord, Made of Rubber
RT010RL
Receptacle Dustcap
without Chain
RT010DC
Receptacle Dustcap without
Nylon Cord, Rubber Material
RB00011910
Sealing Plug
CA401659
Square Flange Receptacle
Gaskets, Thickness 0.8mm (±0.2)
RTFD10B
Accessories
NEW!
See
Page
16
33
Shell Size: 10 Number of Contacts: 4 Contact Size: 16
Sealing: IP67 Salt Spray: 48h
Contacts
Crimp Contacts, Machined
Part Number AWG Wire
Range
(mm²)
Plating
Male Female
MP14M23F MS14M23F 14 2.0-2.5 Gold Flash
MP14M23G5 MS14M23G5 14 2.0-2.5 Gold 5µ”
MP14M23G10 MS14M23G10 14 2.0-2.5 Gold 10µ”
MP14M23G15 MS14M23G15 14 2.0-2.5 Gold 15µ”
MP14M23G30 MS14M23G30 14 2.0-2.5 Gold 30µ”
MP16M23F MS16M23F 18-16 .75-1.5 Gold Flash
MP16M23G5 MS16M23G5 18-16 .75-1.5 Gold 5µ”
MP16M23G10 MS16M23G10 18-16 .75-1.5 Gold 10µ”
MP16M23G15 MS16M23G15 18-16 .75-1.5 Gold 15µ”
MP16M23G30 MS16M23G30 18-16 .75-1.5 Gold 30µ”
MP20M23F MS20M23F 22-20 .34-.50 Gold Flash
MP20M23G5 MS20M23G5 22-20 .34-.50 Gold 5µ”
MP20M23G10 MS20M23G10 22-20 .34-.50 Gold 10µ”
MP20M23G15 MS20M23G15 22-20 .34-.50 Gold 15µ”
MP20M23G30 MS20M23G30 22-20 .34-.50 Gold 30µ”
MP24M23F MS24M23F 26-24 .14-.25 Gold Flash
MP24M23G5 MS24M23G5 26-24 .14-.25 Gold 5µ”
MP24M23G10 MS24M23G10 26-24 .14-.25 Gold 10µ”
MP24M23G15 MS24M23G15 26-24 .14-.25 Gold 15µ”
MP24M23G30 MS24M23G30 26-24 .14-.25 Gold 30µ”
Machined Contacts
Contact Extraction Tool,
#16 (Ø 1.6) Contact
QXRT16
Hand Crimp Tool for
Machined Contacts
MFX-3959
Pneumatic Crimp Tool for
Machined Contact
MFX-3960
Tools
34
Connector Solutions
Contacts (con’t)
SP14M1F SS14M1F 14 2.0-2.5 Gold Flash
SP14M1G5 SS14M1G5 14 2.0-2.5 Gold 5µ”
SP14M1G10 SS14M1G10 14 2.0-2.5 Gold 10µ”
SP14M1G15 SS14M1G15 14 2.0-2.5 Gold 15µ”
SP14M1G30 SS14M1G30 14 2.0-2.5 Gold 30µ”
SP16M1F SS16M1F 18-16 .75-1.5 Gold Flash
SP16M1G5 SS16M1G5 18-16 .75-1.5 Gold 5µ”
SP16M1G10 SS16M1G10 18-16 .75-1.5 Gold 10µ”
SP16M1G15 SS16M1G15 18-16 .75-1.5 Gold 15µ”
SP16M1G30 SS16M1G30 18-16 .75-1.5 Gold 30µ”
SP20M1F SS20M1F 22-20 .34-.50 Gold Flash
SP20M1G5 SS20M1G5 22-20 .34-.50 Gold 5µ”
SP20M1G10 SS20M1G10 22-20 .34-.50 Gold 10µ”
SP20M1G15 SS20M1G15 22-20 .34-.50 Gold 15µ”
SP20M1G30 SS20M1G30 22-20 .34-.50 Gold 30µ”
SP24M1F SS24M1F 22-20 .14-.25 Gold Flash
SP24M1G5 SS24M1G5 26-24 .14-.25 Gold 5µ”
SP24M1G10 SS24M1G10 26-24 .14-.25 Gold 10µ”
SP24M1G15 SS24M1G15 26-24 .14-.25 Gold 15µ”
SP24M1G30 SS24M1G30 26-24 .14-.25 Gold 30µ”
Crimp Contacts, Stamped & Formed
Part Number AWG Wire
Range
(mm²)
Plating
Male Female
Shell Size: 10 Number of Contacts: 4 Contact Size: 16
Sealing: IP67 Salt Spray: 48h
Stamped & Formed Contacts
4 POSITIONS
13A / 300V
Contact Extraction Tool,
#16 (Ø 1.6) Contact
QXRT16
Crimp Die for Stamped &
Formed Contact
MFX-3957
Hand Tool, Stamped & Formed
Contact, Size 16, 20-14AWG
MFX-3954
Tools
35
Backshell
Jam Nut Receptacles
Plug
Square Flange
Receptacles
STEP 1
Choose Receptacle Style
OR
STEP 2
Choose Plug Style
S
TEP 2
Choose Backshell Style
Plug Kit Including Connector,
Backshell & Contacts
CONTACTS SOLD SEPARATELY SEE PAGE 42
SEE TABLE ON NEXT PAGE FOR PART DETAILS
Square Flange
Receptacle Kit Including
Receptacle,Gasket
& Contacts
Jam Nut Receptacle Kit
Including Receptacle
& Contacts
RT0S10CGNS1
RT0S10CGNS2
RT0L10CGNS1
RT0L10CGNS2
RT07102PNH
RT07102SNH
RT07102PNHEC
RT07102SNHEC
RT06102PNH
RT06102SNH
RT06102PNHEC
RT06102SNHEC
RT00102PNH
RT00102SNH
RT00102PNHEC
RT00102SNHEC
OR
36
Connector Solutions
4 POSITIONS
MIX 13A & 5A
/ 350V
Insert Arrangement
Pin (Male) Faceview
Connector Part Numbers
Part Number Connector Type Figure Drawings
Male Female Male Female
RT07102PNH RT07102SNH Jam Nut Receptacle 1,5 2,5
RT07102PNHEC RT07102SNHEC Jam Nut Receptacle with O-ring Seal and
End Cap with Individual
Rear Wire Seal** 3,5 4,5
RT06102PNH RT06102SNH Plug 6 7
RT06102PNHEC RT06102SNHEC Plug with O-ring Seal and
End Cap with Individual Rear Wire Seal** 8 9
RT00102PNH RT00102SNH Square Flange Receptacle 10,14 11,14
RT00102PNHEC RT00102SNHEC Square Flange Receptacle with
O-ring Seal 12,14 13,14
RT00102PNHEC RT00102SNHEC Square Flange Receptacle with O-ring
Seal and End Cap with Individual
Rear Wire Seal** 12,14 13,14
RT00102PNHK RT00102SNHK Square Flange Receptacle Kit 10,14 11,14
Contacts supplied separately see page 42
**See page 39 for the real seal wire range
Backshells
Part Number Backshell Type Cable Range (mm) Figure Drawings Shielding
RT0S10CGNS1 Short Cord Grip (straight) 3-6.5 15
RT0S10CGNS2 Short Cord Grip (straight) 5-8.5 15
RT0L10CGNS1 Long Cord Grip (straight) 3-6.5 16
RT0L10CGNS2 Long Cord Grip (straight) 5-8.5 16
Shell Size: 10 Number of Contacts: 4 Contact Size: Mixed 16 & 20
Sealing: IP67 Salt Spray: 48h
*Connector parts with part numbers ending in EC (with an end cap) were not available for submittal at the time of UL certication.
An upgraded silicone seal is available for all connector parts.
Please add “03” to the end of the part number when ordering.
Operating Temperature: -40°C to +125°C. Not available in kits.
eco|mate® rm
Standard Products
• Suitable For Indoor and Outdoor Applications
• EMI/RMI Shielding Capability with Appropriate Backshell
• Operating Temperature: -40°C to +105°C
• 500 Mating Cycles
• Contacts and Cord Grips Ordered Separately
• UL ECBT2 Certied*
37
Dimensions Jam Nut Receptacle
Shell Size: 10 Number of Contacts: 4 Contact Size: Mixed 16 & 20
Sealing: IP67 Salt Spray: 48h
Jam Nut Receptacle Panel Cutout
Figure 5
Jam Nut Receptacle
Figure 1 Male RT07102PNH
Jam Nut Receptacle
Figure 2 Female RT07102SNH
Jam Nut Receptacle with O-ring Seal and
End Cap with Individual Rear Wire Seal
Figure 3 Male RT07102PNHEC
Jam Nut Receptacle with O-ring Seal and
End Cap with Individual Rear Wire Seal
Figure 4 Female RT07102SNHEC
38
Connector Solutions
Dimensions Plug
Shell Size: 10 Number of Contacts: 4 Contact Size: Mixed 16 & 20
Sealing: IP67 Salt Spray: 48h
Plug
Figure 6 Female RT06102PNH
Plug
Figure 7 Female RT06102SNH
Plug with O-ring Seal and End Cap with
Individual Rear Wire Seal
Figure 8 Male RT06102PNHEC
Plug with O-ring Seal and End Cap with
Individual Rear Wire Seal
Figure 9 Female RT06102SNHEC
4 POSITIONS
MIX 13A & 5A
/ 350V
Individual Sealing Wire Range
Contact Size Insulation Overall Diameter (min-max) Wire Range
16 Ø2.0mm - Ø3.2mm 14 - 24 AWG
20 Ø1.6mm - Ø2.6mm 20-30 AWG
39
Dimensions Square Flange Receptacle
Shell Size: 10 Number of Contacts: 4 Contact Size: Mixed 16 & 20
Sealing: IP67 Salt Spray: 48h
Square Flange Receptacle Panel Cutout
Figure 14
Square Flange Receptacle
Figure 10 Male RT00102PNH
Square Flange Receptacle
Figure 11 Female RT00102SNH
Square Flange Receptacle with O-ring Seal with
End Cap with Individual Rear Wire Seal
Figure 12 Male RT00102PNHEC
Square Flange Receptacle with O-ring Seal with
End Cap with Individual Rear Wire Seal
Figure 13 Female RT00102SNHEC
40
Connector Solutions
Dimensions Backshell
Shell Size: 10 Number of Contacts: 4 Contact Size: Mixed 16 & 20
Sealing: IP67 Salt Spray: 48h
4 POSITIONS
MIX 13A & 5A
/ 350V
Short Cord Grip (straight)
Figure 15
Long Cord Grip (straight)
Figure 16
Locking Clip with Lanyard
108039110
Plug Dustcap with Chain
RT610DCG
Plug Dustcap without Chain
RT610DC
Receptacle Dustcap with Chain
RT010DCG
Receptacle Dustcap with Nylon
Cord, Made of Rubber
RT010RL
Receptacle Dustcap
without Chain
RT010DC
Receptacle Dustcap without
Nylon Cord, Rubber Material
RB00011910
Sealing Plug
CA402059
Sealing Plug
CA401659
Square Flange Receptacle
Gaskets, Thickness 0.8mm (±0.2)
RTFD10B
NEW!
See
Page
16
Accessories
41
Shell Size: 10 Number of Contacts: 4 Contact Size: Mixed 16 & 20
Sealing: IP67 Salt Spray: 48h
Contacts
Crimp Contacts, Machined
Part Number Contact
Size AWG Wire
Range
(mm²)
Plating
Male Female
MP14M23F MS14M23F 16 14 2.0-2.5 Gold Flash
MP14M23G5 MS14M23G5 16 14 2.0-2.5 Gold 5µ”
MP14M23G10 MS14M23G10 16 14 2.0-2.5 Gold 10µ”
MP14M23G15 MS14M23G15 16 14 2.0-2.5 Gold 15µ”
MP14M23G30 MS14M23G30 16 14 2.0-2.5 Gold 30µ”
MP16M23F MS16M23F 16 18-16 .75-1.5 Gold Flash
MP16M23G5 MS16M23G5 16 18-16 .75-1.5 Gold 5µ”
MP16M23G10 MS16M23G10 16 18-16 .75-1.5 Gold 10µ”
MP16M23G15 MS16M23G15 16 18-16 .75-1.5 Gold 15µ”
MP16M23G30 MS16M23G30 16 18-16 .75-1.5 Gold 30µ”
MP20M23F MS20M23F 16 22-20 .34-.50 Gold Flash
MP20M23G5 MS20M23G5 16 22-20 .34-.50 Gold 5µ”
MP20M23G10 MS20M23G10 16 22-20 .34-.50 Gold 10µ”
MP20M23G15 MS20M23G15 16 22-20 .34-.50 Gold 15µ”
MP20M23G30 MS20M23G30 16 22-20 .34-.50 Gold 30µ”
MP24M23F MS24M23F 16 26-24 .14-.25 Gold Flash
MP24M23G5 MS24M23G5 16 26-24 .14-.25 Gold 5µ”
MP24M23G10 MS24M23G10 16 26-24 .14-.25 Gold 10µ”
MP24M23G15 MS24M23G15 16 26-24 .14-.25 Gold 15µ”
MP24M23G30 MS24M23G30 16 26-24 .14-.25 Gold 30µ”
Machined Contacts
42
Connector Solutions
4 POSITIONS
MIX 13A & 5A
/ 350V
Shell Size: 10 Number of Contacts: 4 Contact Size: Mixed 16 & 20
Sealing: IP67 Salt Spray: 48h
Crimp Contacts Machined (con’t)
MP20W23F MS20W23F 20 22-20 .34-.50 Gold Flash
MP20W23G5 MS20W23G5 20 22-20 .34-.50 Gold 5µ”
MP20W23G10 MS20W23G10 20 22-20 .34-.50 Gold 10µ”
MP20W23G15 MS20W23G15 20 22-20 .34-.50 Gold 15µ”
MP20W23G30 MS20W23G30 20 22-20 .34-.50 Gold 30µ”
MP24W23F MS24W23F 20 .13-.25 26-24 Gold Flash
MP24W23G5 MS24W23G5 20 .13-.25 26-24 Gold 5µ”
MP24W23G10 MS24W23G10 20 .13-.25 26-24 Gold 10µ""
MP24W23G15 MS24W23G15 20 .13-.25 26-24 Gold 15µ”
MP24W23G30 MS24W23G30 20 .13-.25 26-24 Gold 30µ”
MP28W23F MS28W23F 20 30-28 .05-.08 Gold Flash
MP28W23G5 MS28W23G5 20 30-28 .05-.08 Gold 5µ”
MP28W23G10 MS28W23G10 20 30-28 .05-.08 Gold 10µ”
MP28W23G15 MS28W23G15 20 30-28 .05-.08 Gold 15µ”
MP28W23G30 MS28W23G30 20 30-28 .05-.08 Gold 30µ”
Part Number Contact
Size AWG Wire
Range
(mm²)
Plating
Male Female
Tools
Contact Extraction Tool,
#16 (Ø 1.6) Contact
QXRT16
Contact Extraction Tool,
#20 (Ø 1.0) Contact
QXRT20
Hand Crimp Tool for
Machined Contacts
MFX-3959
Pneumatic Crimp Tool for
Machined Contacts
MFX-3960
Machined Contacts
43
Shell Size: 10 Number of Contacts: 4 Contact Size: Mixed 16 & 20
Sealing: IP67 Salt Spray: 48h
Contacts (con’t)
SP14M1F SS14M1F 16 14 2.0-2.5 Gold Flash
SP14M1G5 SS14M1G5 16 14 2.0-2.5 Gold 5µ”
SP14M1G10 SS14M1G10 16 14 2.0-2.5 Gold 10µ”
SP14M1G15 SS14M1G15 16 14 2.0-2.5 Gold 15µ”
SP14M1G30 SS14M1G30 16 14 2.0-2.5 Gold 30µ”
SP16M1F SS16M1F 16 18-16 .75-1.5 Gold Flash
SP16M1G5 SS16M1G5 16 18-16 .75-1.5 Gold 5µ”
SP16M1G10 SS16M1G10 16 18-16 .75-1.5 Gold 10µ”
SP16M1G15 SS16M1G15 16 18-16 .75-1.5 Gold 15µ”
SP16M1G30 SS16M1G30 16 18-16 .75-1.5 Gold 30µ”
SP20M1F SS20M1F 16 22-20 .34-.50 Gold Flash
SP20M1G5 SS20M1G5 16 22-20 .34-.50 Gold 5µ”
SP20M1G10 SS20M1G10 16 22-20 .34-.50 Gold 10µ”
SP20M1G15 SS20M1G15 16 22-20 .34-.50 Gold 15µ”
SP20M1G30 SS20M1G30 16 22-20 .34-.50 Gold 30µ”
SP24M1F SS24M1F 16 22-20 .14-.25 Gold Flash
SP24M1G5 SS24M1G5 16 26-24 .14-.25 Gold 5µ”
SP24M1G10 SS24M1G10 16 26-24 .14-.25 Gold 10µ”
SP24M1G15 SS24M1G15 16 26-24 .14-.25 Gold 15µ”
SP24M1G30 SS24M1G30 16 26-24 .14-.25 Gold 30µ”
Crimp Contacts, Stamped & Formed
Part Number Contact
Size AWG Max Wire
(mm²) Plating
Male Female
Stamped & Formed Contacts
44
Connector Solutions
4 POSITIONS
MIX 13A & 5A
/ 350V
Shell Size: 10 Number of Contacts: 4 Contact Size: Mixed 16 & 20
Sealing: IP67 Salt Spray: 48h
Crimp Contacts, Stamped & Formed (con’t)
SP20W1F SS20W1F 20 22-20 .34-.50 Gold Flash
SP20W1G10 SS20W1G10 20 22-20 .34-.50 Gold 10µ”
SP20W1G15 SS20W1G15 20 22-20 .34-.50 Gold 15µ”
SP20W1G30 SS20W1G30 20 22-20 .34-.50 Gold 30µ”
SP20W1G5 SS20W1G5 20 22-20 .34-.50 Gold 5µ”
SP24W1F SS24W1F 20 26-24 .14-.25 Gold Flash
SP24W1G5 SS24W1G5 20 26-24 .14-.25 Gold 5µ”
SP24W1G10 SS24W1G10 20 26-24 .14-.25 Gold 10µ”
SP24W1G15 SS24W1G15 20 26-24 .14-.25 Gold 15µ”
SP24W1G30 SS24W1G30 20 26-24 .14-.25 Gold 30µ”
SP28W1F SS28W1F 20 30-28 .05-.08 Gold Flash
SP28W1G5 SS28W1G5 20 30-28 .05-.08 Gold 5µ”
SP28W1G10 SS28W1G10 20 30-28 .05-.08 Gold 10µ”
SP28W1G15 SS28W1G15 20 30-28 .05-.08 Gold 15µ”
SP28W1G30 SS28W1G30 20 30-28 .05-.08 Gold 30µ”
Part Number Contact
Size AWG Max Wire
(mm²) Plating
Male Female
Tools
Contact Extraction Tool,
#16 (Ø 1.6) Contact
QXRT16
Contact Extraction Tool,
#20 (Ø 1.0) Contact
QXRT20
Crimp Die for Stamped &
Formed Contact
MFX-3957
Hand Tool for Stamped &
Formed Contact, Size 16,
20-14AWG
MFX-3954
Hand Tool for Stamped &
Formed Contact, Size 20,
20-28AWG
MFX-3958
45
Backshell
Jam Nut Receptacles
Plug
Square Flange
Receptacles
STEP 1
Choose Receptacle Style
OR
STEP 2
Choose Plug Style
S
TEP 2
Choose Backshell Style
CONTACTS SOLD SEPARATELY SEE PAGE 52
SEE TABLE ON NEXT PAGE FOR PART DETAILS
RT0S14CGNS1
RT0S14CGNS2
RT0L14CGNS1
RT0L14CGNS2
RT0B14CGNS1
RT0B14CGNS2
RT07142PNH
RT07142SNH
RT07142PNHEC
RT07142SNHEC
RT06142PNH
RT06142SNH
RT06142PNHEC
RT06142SNHEC
RT00142PNH
RT00142SNH
RT00142PNHEC
RT00142SNHEC
46
Connector Solutions
4 POSITIONS
MIX 23A &13A
/ 350V
Insert Arrangement
Pin (Male) Faceview
Connector Part Numbers
Part Number Connector Type Figure Drawings
Male Female Male Female
RT07142PNH RT07142SNH Jam Nut Receptacle with O-ring Seal 1,5 2,5
RT07142PNHEC RT07142SNHEC Jam Nut Receptacle with O-ring Seal and
End Cap with Individual
Rear Wire Seal** 3,5 4,5
RT06142PNH RT06142SNH Plug with O-ring Seal 6 7
RT06142PNHEC RT06142SNHEC Plug with O-ring Seal and
End Cap with Individual Rear Wire Seal** 8 9
RT00142PNH RT00142SNH Square Flange Receptacle 10,14 11,14
RT00142PNHEC RT00142SNHEC Square Flange Receptacle with O-ring
Seal and End Cap with
Individual Rear Wire Seal** 12,14 13,14
Contacts supplied separately see page 52
**See page 49 for the real seal wire range
Backshells
Part Number Backshell Type Cable Range (mm) Figure Drawings Shielding
RT0S14CGNS1 Short Cord Grip (straight) 6-10.5 15
RT0S14CGNS2 Short Cord Grip (straight) 8.5-12.5 15
RT0L14CGNS1 Long Cord Grip (straight) 6-10.5 16
RT0L14CGNS2 Long Cord Grip (straight) 8.5-12.5 16
RT0B14CGNS1 Cord Grip (90°) 6-10.5 17
RT0B14CGNS2 Cord Grip (90°) 8.0-12.5 17
Shell Size: 14 Number of Contacts: 4 Contact Size: Mixed 2.5mm & 16
Sealing: IP67 Salt Spray: 48h
*Connector parts with part numbers ending in EC (with an end cap) were not available for submittal at the time of UL certication.
An upgraded silicone seal is available for all connector parts.
Please add “03” to the end of the part number when ordering.
Operating Temperature: -40°C to +125°C. Not available in kits.
eco|mate® rm
Standard Products
• Suitable For Indoor and Outdoor Applications
• EMI/RMI Shielding Capability with Appropriate Backshell
• Operating Temperature: -40°C to +105°C
• 500 Mating Cycles
• Contacts and Cord Grips Ordered Separately
• UL ECBT2 Certied*
47
Dimensions Jam Nut Receptacle
Shell Size: 14 Number of Contacts: 4 Contact Size: Mixed 2.5mm & 16
Sealing: IP67 Salt Spray: 48h
Jam Nut Receptacle Panel Cutout
Figure 5
Jam Nut Receptacle with O-ring Seal
Figure 1 Male RT07142PNH
Jam Nut Receptacle with O-ring Seal
Figure 2 Female RT07142SNH
Jam Nut Receptacle with O-ring Seal and
End Cap with Individual Rear Wire Seal
Figure 3 Male RT07142PNHEC
Jam Nut Receptacle with O-ring Seal and
End Cap with Individual Rear Wire Seal
Figure 4 Female RT07142SNHEC
48
Connector Solutions
Dimensions Plug
Shell Size: 14 Number of Contacts: 4 Contact Size: Mixed 2.5mm & 16
Sealing: IP67 Salt Spray: 48h
4 POSITIONS
MIX 23A &13A
/ 350V
Plug with O-ring Seal
Figure 6 Male RT06142PNH
Plug with O-ring Seal
Figure 7 Female RT06142SNH
Plug with O-ring Seal and End Cap with
Individual Rear Wire Seal
Figure 8 Male RT06142PNHEC
Plug with O-ring Seal and End Cap with
Individual Rear Wire Seal
Figure 9 Female RT06142SNHEC
Individual Sealing Wire Range
Contact Size Insulation Overall Diameter (min-max) Wire Range
2.5mm Ø3.3mm - Ø4.3mm 14 - 12 AWG
16 Ø2.0mm - Ø3.2mm 14 - 24 AWG
49
Dimensions Square Flange Receptacle
Shell Size: 14 Number of Contacts: 4 Contact Size: Mixed 2.5mm & 16
Sealing: IP67 Salt Spray: 48h
Square Flange Receptacle Panel Cutout
Figure 14
Square Flange Receptacle
Figure 10 Male RT00142PNH
Square Flange Receptacle
Figure 11 Female RT00142SNH
Square Flange Receptacle with O-ring Seal and
End Cap with Individual Rear Wire Seal
Figure 12 Male RT00142PNHEC
Square Flange Receptacle with O-ring Seal Seal and
End Cap with Individual Rear Wire Seal
Figure 13 Female RT00142SNHEC
50
Connector Solutions
Dimensions Backshell
Shell Size: 14 Number of Contacts: 4 Contact Size: Mixed 2.5mm & 16
Sealing: IP67 Salt Spray: 48h
4 POSITIONS
MIX 23A &13A
/ 350V
Short Cord Grip (straight)
Figure 15
Long Cord Grip (straight)
Figure 16
Cord Grip (90°)
Figure 17
Accessories
Locking Clip with Lanyard
108039114
Plug Dustcap with Chain
RT614DCG
Plug Dustcap without Chain
RT614DC
Receptacle Dustcap with Chain
RT014DCG
Receptacle Dustcap with Nylon
Cord, Made of Rubber
RT014RL
Receptacle Dustcap
without Chain
RT014DC
Receptacle Dustcap without
Nylon Cord, Rubber Material
RB00011914
Sealing Plug
CA401659
Square Flange Receptacle
Gaskets, Thickness 0.8mm (±0.2)
RTFD14B
NEW!
See
Page
16
Sealing Plug
CA401659
51
Shell Size: 14 Number of Contacts: 4 Contact Size: Mixed 2.5mm & 16
Sealing: IP67 Salt Spray: 48h
Contacts
Crimp Contacts, Machined
Part Number Contact
Size AWG Wire
Range
(mm²)
Plating
Male Female
MP14M23F MS14M23F 16 14 2.0-2.5 Gold Flash
MP14M23G5 MS14M23G5 16 14 2.0-2.5 Gold 5µ”
MP14M23G10 MS14M23G10 16 14 2.0-2.5 Gold 10µ”
MP14M23G15 MS14M23G15 16 14 2.0-2.5 Gold 15µ”
MP14M23G30 MS14M23G30 16 14 2.0-2.5 Gold 30µ”
MP16M23F MS16M23F 16 18-16 .75-1.5 Gold Flash
MP16M23G5 MS16M23G5 16 18-16 .75-1.5 Gold 5µ”
MP16M23G10 MS16M23G10 16 18-16 .75-1.5 Gold 10µ”
MP16M23G15 MS16M23G15 16 18-16 .75-1.5 Gold 15µ”
MP16M23G30 MS16M23G30 16 18-16 .75-1.5 Gold 30µ”
MP20M23F MS20M23F 16 22-20 .34-.50 Gold Flash
MP20M23G5 MS20M23G5 16 22-20 .34-.50 Gold 5µ”
MP20M23G10 MS20M23G10 16 22-20 .34-.50 Gold 10µ”
MP20M23G15 MS20M23G15 16 22-20 .34-.50 Gold 15µ”
MP20M23G30 MS20M23G30 16 22-20 .34-.50 Gold 30µ”
MP24M23F MS24M23F 16 26-24 .14-.25 Gold Flash
MP24M23G5 MS24M23G5 16 26-24 .14-.25 Gold 5µ”
MP24M23G10 MS24M23G10 16 26-24 .14-.25 Gold 10µ”
MP24M23G15 MS24M23G15 16 26-24 .14-.25 Gold 15µ”
MP24M23G30 MS24M23G30 16 26-24 .14-.25 Gold 30µ”
Machined Contacts
Extraction Tool 2.5mm Contact
QXRT12S
Tools
Hand Crimp Tool for
Machined Contacts
MFX-3959
Pneumatic Crimp Tool for
Machined Contacts
MFX-3960
52
Connector Solutions
4 POSITIONS
MIX 23A &13A
/ 350V
Shell Size: 14 Number of Contacts: 4 Contact Size: Mixed 2.5mm & 16
Sealing: IP67 Salt Spray: 48h
Crimp Contacts, Stamped & Formed
Part Number Contact
Size AWG Wire
Range
(mm²)
Plating
Male Female
SP12A1T SS12A1T 2.5mm 14-12 2.5-3.5 Tin
SP14M1F SS14M1F 16 14 2.0-2.5 Gold Flash
SP14M1G5 SS14M1G5 16 14 2.0-2.5 Gold 5µ”
SP14M1G10 SS14M1G10 16 14 2.0-2.5 Gold 10µ”
SP14M1G15 SS14M1G15 16 14 2.0-2.5 Gold 15µ”
SP14M1G30 SS14M1G30 16 14 2.0-2.5 Gold 30µ”
SP16M1F SS16M1F 16 18-16 .75-1.5 Gold Flash
SP16M1G5 SS16M1G5 16 18-16 .75-1.5 Gold 5µ”
SP16M1G10 SS16M1G10 16 18-16 .75-1.5 Gold 10µ”
SP16M1G15 SS16M1G15 16 18-16 .75-1.5 Gold 15µ”
SP16M1G30 SS16M1G30 16 18-16 .75-1.5 Gold 30µ”
SP20M1F SS20M1F 16 22-20 .34-.50 Gold Flash
SP20M1G5 SS20M1G5 16 22-20 .34-.50 Gold 5µ”
SP20M1G10 SS20M1G10 16 22-20 .34-.50 Gold 10µ”
SP20M1G15 SS20M1G15 16 22-20 .34-.50 Gold 15µ”
SP20M1G30 SS20M1G30 16 22-20 .34-.50 Gold 30µ”
SP24M1F SS24M1F 16 22-20 .14-.25 Gold Flash
SP24M1G5 SS24M1G5 16 26-24 .14-.25 Gold 5µ”
SP24M1G10 SS24M1G10 16 26-24 .14-.25 Gold 10µ”
SP24M1G15 SS24M1G15 16 26-24 .14-.25 Gold 15µ”
SP24M1G30 SS24M1G30 16 26-24 .14-.25 Gold 30µ”
Contacts (con’t)
Stamped & Formed Contacts
Contact Extraction Tool,
#16 (Ø 1.6) Contact
QXRT16
Crimp Die for Stamped &
Formed Contact
MFX-3957
Hand Tool, Stamped & Formed
Contact, Size 16
MFX-3954
Hand Tool, Stamped & Formed
Contact, 2.5 mm
MFX-3962
Extraction Tool 2.5mm Contact
QXRT12S
Tools
2.5mm
53
Backshell
Jam Nut Receptacles
Plug
Square Flange
Receptacles
STEP 1
Choose Receptacle Style
OR
STEP 2
Choose Plug Style
S
TEP 2
Choose Backshell Style
CONTACTS SOLD SEPARATELY SEE PAGE 60
SEE TABLE ON NEXT PAGE FOR PART DETAILS
RT0S14CGNS1
RT0S14CGNS2
RT0L14CGNS1
RT0L14CGNS2
RT0B14CGNS1
RT0B14CGNS2
RT07144PNH
RT07144SNH
RT07144PNHEC
RT07144SNHEC
RT06144PNH
RT06144SNH
RT06144PNHEC
RT06144SNHEC
RT00144PNH
RT00144SNH
RT00144PNHEC
RT00144SNHEC
54
Connector Solutions
4 POSITIONS
23A / 350V
Insert Arrangement
Pin (Male) Faceview
Connector Part Numbers
Part Number Connector Type Figure Drawings
Male Female Male Female
RT07144PNH RT07144SNH Jam Nut Receptacle 1,5 2,5
RT07144PNHEC RT07144SNHEC Jam Nut Receptacle with O-ring Seal
and End Cap with Individual
Rear Wire Seal** 3,5 4,5
RT06144PNH RT06144SNH Plug 6 7
RT06144PNHEC RT06144SNHEC Plug with O-ring Seal and End Cap with
Individual Rear Wire Seal** 8 9
RT00144PNH RT00144SNH Square Flange Receptacle 10 11,14
RT00144PNHEC RT00144SNHEC Square Flange Receptacle with O-ring
Seal and End Cap with
Individual Rear Wire Seal** 12,14 13,14
Contacts supplied separately see page 60
**See page 57 for the real seal wire range
Backshells
Part Number Backshell Type Cable Range (mm) Figure Drawings Shielding
RT0S14CGNS1 Short Cord Grip (straight) 6-10.5 15
RT0S14CGNS2 Short Cord Grip (straight) 8.5-12.5 15
RT0L14CGNS1 Long Cord Grip (straight) 6-10.5 16
RT0L14CGNS2 Long Cord Grip (straight) 8.5-12.5 16
RT0B14CGNS1 Cord Grip (90°) 6-10.5 17
RT0B14CGNS2 Cord Grip (90°) 8.0-12.5 17
Shell Size: 14 Number of Contacts: 4 Contact Size: 2.5mm
Sealing: IP67 Salt Spray: 48h
*Connector parts with part numbers ending in EC (with an end cap) were not available for submittal at the time of UL certication.
An upgraded silicone seal is available for all connector parts.
Please add “03” to the end of the part number when ordering.
Operating Temperature: -40°C to +125°C. Not available in kits.
eco|mate® rm
Standard Products
• Suitable For Indoor and Outdoor Applications
• EMI/RMI Shielding Capability with Appropriate Backshell
• Operating Temperature: -40°C to +105°C
• 500 Mating Cycles
• Contacts and Cord Grips Ordered Separately
• UL ECBT2 Certied*
55
Dimensions Jam Nut Receptacle
Shell Size: 14 Number of Contacts: 4 Contact Size: 2.5mm
Sealing: IP67 Salt Spray: 48h
Jam Nut Receptacle Panel Cutout
Figure 5
Jam Nut Receptacle
Figure 1 Male RT07144PNH
Jam Nut Receptacle
Figure 2 Female RT07144SNH
Jam Nut Receptacle with O-ring Seal and
End Cap with Individual Rear Wire Seal
Figure 3 Female RT07144PNHEC
Jam Nut Receptacle with O-ring Seal and
End Cap with Individual Rear Wire Seal
Figure 4 Female RT07144SNHEC
56
Connector Solutions
Dimensions Plug
Shell Size: 14 Number of Contacts: 4 Contact Size: 2.5mm
Sealing: IP67 Salt Spray: 48h
Plug
Figure 6 Male RT06144PNH
Plug
Figure 7 Female RT06144SNH
Plug with O-ring Seal and End Cap with
Individual Rear Wire Seal
Figure 8 Male RT06144PNHEC
Plug with O-ring Seal and End Cap with
Individual Rear Wire Seal
Figure 9 Female RT06144SNHEC
4 POSITIONS
23A / 350V
Individual Sealing Wire Range
Contact Size Insulation Overall Diameter (min-max) Wire Range
2.5mm Ø3.3mm - Ø4.3mm 14 - 12 AWG
57
Dimensions Square Flange Receptacle
Shell Size: 14 Number of Contacts: 4 Contact Size: 2.5mm
Sealing: IP67 Salt Spray: 48h
Square Flange Receptacle Panel Cutout
Figure 14
Square Flange Receptacle
Figure 10 Male RT00144PNH
Square Flange Receptacle
Figure 11 Female RT00144SNH
Square Flange Receptacle with O-ring Seal
and End Cap with Individual Rear Wire Seal
Figure 12 Male RT00144PNHEC
Square Flange Receptacle with O-ring Seal
and End Cap with Individual Rear Wire Seal
Figure 13 Female RT00144SNHEC
58
Connector Solutions
Dimensions Backshell
Shell Size: 14 Number of Contacts: 4 Contact Size: 2.5mm
Sealing: IP67 Salt Spray: 48h
4 POSITIONS
23A / 350V
Short Cord Grip (straight)
Figure 15
Long Cord Grip (straight)
Figure 16
Cord Grip (90°)
Figure 17
59
Shell Size: 14 Number of Contacts: 4 Contact Size: 2.5mm
Sealing: IP67 Salt Spray: 48h
Contacts
SP12A1T SS12A1T 14-12 2.5-3.5 Tin
No machined contacts are available for this group
Crimp Contacts, Stamped & Formed
Part Number AWG Wire
Range
(mm²)
Plating
Male Female
Extraction Tool 2.5mm Contact
QXRT12S
Hand Tool, Stamped & Formed
Contact, 2.5 mm
MFX-3962
Tools
Stamped & Formed Contacts
60
Connector Solutions
Accessories
Shell Size: 14 Number of Contacts: 4 Contact Size: 2.5mm
Sealing: IP67 Salt Spray: 48h
4 POSITIONS
23A / 350V
Locking Clip with Lanyard
108039114
Plug Dustcap with Chain
RT614DCG
Plug Dustcap without Chain
RT614DC
Receptacle Dustcap with Chain
RT014DCG
Receptacle Dustcap with Nylon
Cord, Made of Rubber
RT014RL
Receptacle Dustcap
without Chain
RT014DC
Receptacle Dustcap without
Nylon Cord, Rubber Material
RB00011914
Sealing Plug
CA401259
Square Flange Receptacle
Gaskets, Thickness 0.8mm (±0.2)
RTFD14B
NEW!
See
Page
16
61
Backshell
Jam Nut Receptacles
Plug
Square Flange
Receptacles
STEP 1
Choose Receptacle Style
OR
STEP 2
Choose Plug Style
S
TEP 2
Choose Backshell Style
CONTACTS SOLD SEPARATELY SEE PAGE 68
SEE TABLE ON NEXT PAGE FOR PART DETAILS
RT0S16CGNS1
RT0S16CGNS2
RT0L16CGNS1
RT0L16CGNS2
RT0B16CGNS1
RT0B16CGNS2
RT07164PNH
RT07164SNH
RT07164PNHEC
RT07164SNHEC
RT06164PNH
RT06164SNH
RT06164PNHEC
RT06164SNHEC
RT00164PNH
RT00164SNH
RT00164PNHEC
RT00164SNHEC
62
Connector Solutions
4 POSITIONS
45A / 500V
Insert Arrangement
Pin (Male) Faceview
Connector Part Numbers
Part Number Connector Type Figure Drawings
Male Female Male Female
RT07164PNH RT07164SNH Jam Nut Receptacle 1,5 2,5
RT07164PNHEC RT07164SNHEC Jam Nut Receptacle with O-ring Seal
and End Cap with Individual
Rear Wire Seal** 3,5 4,5
RT06164PNH RT06164SNH Plug 6 7
RT06164PNHEC RT06164SNHEC Plug with O-ring Seal and End Cap
with Individual Rear Wire Seal** 8 9
RT00164PNH RT00164SNH Square Flange Receptacle 10,14 11,14
RT00164PNHEC RT00164SNHEC Square Flange Receptacle with O-ring
Seal and End Cap with
Individual Rear Wire Seal** 12,14 13,14
Contacts supplied separately see page 68
**See page 65 for the real seal wire range
Backshells
Part Number Backshell Type Cable Range (mm) Figure Drawings Shielding
RT0S16CGNS1 Short Cord Grip (straight) 9.0-14.5 15
RT0S16CGNS2 Short Cord Grip (straight) 13.5-17 15
RT0L16CGNS1 Long Cord Grip (straight) 9.0-14.5 16
RT0L16CGNS2 Long Cord Grip (straight) 13.5-17 16
RT0B16CGNS1 Cord Grip (90°) 9.5-14.5 17
RT0B16CGNS2 Cord Grip (90°) 13.5-17.0 17
Shell Size: 16 Number of Contacts: 4 Contact Size: 3.6mm
Sealing: IP67 Salt Spray: 48h
*Connector parts with part numbers ending in EC (with an end cap) were not available for submittal at the time of UL certication.
An upgraded silicone seal is available for all connector parts.
Please add “03” to the end of the part number when ordering.
Operating Temperature: -40°C to +125°C. Not available in kits.
eco|mate® rm
Standard Products
• Suitable For Indoor and Outdoor Applications
• EMI/RMI Shielding Capability with Appropriate Backshell
• Operating Temperature: -40°C to +105°C
• 500 Mating Cycles
• Contacts and Cord Grips Ordered Separately
• UL ECBT2 Certied*
63
Dimensions Jam Nut Receptacle
Shell Size: 16 Number of Contacts: 4 Contact Size: 3.6mm
Sealing: IP67 Salt Spray: 48h
Jam Nut Receptacle Panel Cutout
Figure 5
Jam Nut Receptacle
Figure 1 Male RT07164PNH
Jam Nut Receptacle
Figure 2 Female RT07164SNH
Jam Nut Receptacle with O-ring Seal and
End Cap with Individual Rear Wire Seal
Figure 3 Male RT07164PNHEC
Jam Nut Receptacle with O-ring Seal and
End Cap with Individual Rear Wire Seal
Figure 4 Female RT07164SNHEC
64
Connector Solutions
Dimensions Plug
Shell Size: 16 Number of Contacts: 4 Contact Size: 3.6mm
Sealing: IP67 Salt Spray: 48h
4 POSITIONS
45A / 500V
Plug
Figure 6 Male RT06164PNH
Plug
Figure 7 Female RT06164SNH
Plug with O-ring Seal and End Cap with
Individual Rear Wire Seal
Figure 8 Male RT06164PNHEC
Plug with O-ring Seal and End Cap with
Individual Rear Wire Seal
Figure 9 Female RT06164SNHEC
Individual Sealing Wire Range
Contact Size Insulation Overall Diameter (min-max) Wire Range
3.6mm Ø2.8mm - Ø5.8mm 12 - 10 AWG
65
Dimensions Square Flange Receptacle
Shell Size: 16 Number of Contacts: 4 Contact Size: 3.6mm
Sealing: IP67 Salt Spray: 48h
Square Flange Receptacle Panel Cutout
Figure 14
Square Flange Receptacle
Figure 10 Male RT00164PNH
Square Flange Receptacle
Figure 11 Female RT00164SNH
Square Flange Receptacle with O-ring Seal and
End Cap with Individual Rear Wire Seal
Figure 12 Male RT00164PNHEC
Square Flange Receptacle with O-ring Seal and
End Cap with Individual Rear Wire Seal
Figure 13 Female RT00164SNHEC
66
Connector Solutions
Dimensions Backshell
Shell Size: 16 Number of Contacts: 4 Contact Size: 3.6mm
Sealing: IP67 Salt Spray: 48h
4 POSITIONS
45A / 500V
Short Cord Grip (straight)
Figure 15
Long Cord Grip (straight)
Figure 16
Cord Grip (90°)
Figure 17
67
Shell Size: 16 Number of Contacts: 4 Contact Size: 3.6mm
Sealing: IP67 Salt Spray: 48h
Contacts
Crimp Contacts, Machined
Part Number AWG Wire
Range
(mm²)
Plating
Male Female
MP10A23S MS10A23S 8 3.0-6.0 Silver Plated
no stamped & formed contacts are available for this groupt
Extraction Tool 3.6mm Contact
QXRT08
Extraction Tool (for eco|mate® rm
with Radsok) 3.6mm Contact
QXRT08R
Tools
Machined Contacts
68
Connector Solutions
Accessories
Shell Size: 16 Number of Contacts: 4 Contact Size: 3.6mm
Sealing: IP67 Salt Spray: 48h
4 POSITIONS
45A / 500V
Locking Clip with Lanyard
108039116
Plug Dustcap with Chain
RT616DCG
Plug Dustcap without Chain
RT616DC
Receptacle Dustcap with Chain
RT016DCG
Receptacle Dustcap with Nylon
Cord, Made of Rubber
RT016RL
Receptacle Dustcap
without Chain
RT016DC
Receptacle Dustcap without
Nylon Cord, Rubber Material
RB00011916
Square Flange Receptacle
Gaskets, Thickness 0.8mm (±0.2)
RTFD16B
NEW!
See
Page
16
69
Backshell
Jam Nut Receptacles
Plug
Square Flange
Receptacles
STEP 1
Choose Receptacle Style
OR
STEP 2
Choose Plug Style
S
TEP 2
Choose Backshell Style
Plug Kit Including Connector,
Backshell & Contacts
CONTACTS SOLD SEPARATELY SEE PAGE 76
SEE TABLE ON NEXT PAGE FOR PART DETAILS
Square Flange
Receptacle Kit Including
Receptacle,Gasket
& Contacts
Jam Nut Receptacle Kit
Including Receptacle
& Contacts
RT0S10CGNS1
RT0S10CGNS2
RT0L10CGNS1
RT0L10CGNS2
RT0W7106PNH
RT0W7106SNH
RT0W7106PNHEC
RT0W7106SNHEC
RT0W6106PNH
RT0W6106SNH
RT0W6106PNHEC
RT0W6106SNHEC
RT0W0106PNH
RT0W0106SNH
RT0W0106PNHEC
RT0W0106SNHEC
OR
70
Connector Solutions
6 POSITIONS
5A, 7.5A /
150V
Insert Arrangement
Pin (Male) Faceview
Connector Part Numbers
Part Number Connector Type Figure Drawings
Male Female Male Female
RT0W7106PNH RT0W7106SNH Jam Nut Receptacle 1,5 2,5
RT0W7106PNHEC RT0W7106SNHEC Jam Nut Receptacle with O-ring Seal
and End Cap with Individual
Rear Wire Seal** 3,5 4,5
RT0W7106PNHK RT0W7106SNHK Jam Nut Receptacle Kit 1,5 2,5
RT0W6106PNH RT0W6106SNH Plug 6 7
RT0W6106PNHEC RT0W6106SNHEC Plug with O-ring Seal and End Cap
with Individual Rear Wire Seal** 8 9
RT0W6106PNHK RT0W6106SNHK Plug Kit 6 7
RT0W0106PNH RT0W0106SNH Square Flange Receptacle 10,14 11,14
RT0W0106PNHEC RT0W0106SNHEC Square Flange Receptacle with O-ring
Seal and End Cap with
Individual Rear Wire Seal** 12,14 13,14
RT0W0106PNHK RT0W0106SNHK Square Flange Receptacle Kit 10,14 11,14
Contacts supplied separately see page 76
**See page 73 for the real seal wire range
Backshells
Part Number Backshell Type Cable Range (mm) Figure Drawings Shielding
RT0S10CGNS1 Short Cord Grip (straight) 3-6.5 15
RT0S10CGNS2 Short Cord Grip (straight) 5-8.5 15
RT0L10CGNS1 Long Cord Grip (straight) 3-6.5 16
RT0L10CGNS2 Long Cord Grip (straight) 5-8.5 16
Shell Size: 10 Number of Contacts: 6 Contact Size: 20
Sealing: IP67 Salt Spray: 48h
*Connector parts with part numbers ending in EC (with an end cap) were not available for submittal at the time of UL certication.
An upgraded silicone seal is available for all connector parts.
Please add “03” to the end of the part number when ordering.
Operating Temperature: -40°C to +125°C. Not available in kits.
eco|mate® rm
Standard Products
• Suitable For Indoor and Outdoor Applications
• EMI/RMI Shielding Capability with Appropriate Backshell
• Operating Temperature: -40°C to +105°C
• 500 Mating Cycles
• Contacts and Cord Grips Ordered Separately
• UL ECBT2 Certied*
71
Dimensions Jam Nut Receptacle
Shell Size: 10 Number of Contacts: 6 Contact Size: 20
Sealing: IP67 Salt Spray: 48h
Jam Nut Receptacle Panel Cutout
Figure 5
Jam Nut Receptacle
Figure 1 Male RT0W7106PNH
Jam Nut Receptacle
Figure 2 Female RT0W7106SNH
Jam Nut Receptacle with O-ring Seal and End Cap
with Individual Rear Wire Seal
Figure 3 Male RT0W7106PNHEC
Jam Nut Receptacle with O-ring Seal and End Cap
with Individual Rear Wire Seal
Figure 4 Female RT0W7106SNHEC
72
Connector Solutions
Dimensions Plug
Shell Size: 10 Number of Contacts: 6 Contact Size: 20
Sealing: IP67 Salt Spray: 48h
Plug
Figure 6 Male RT0W6106PNH
Plug
Figure 7 Female RT0W6106SNH
Plug with O-ring Seal and End Cap
with Individual Rear Wire Seal
Figure 8 Male RT0W6106PNHEC
Plug with O-ring Seal and End Cap
with Individual Rear Wire Seal
Figure 9 Female RT0W6106SNHEC
6 POSITIONS
5A, 7.5A /
150V
Individual Sealing Wire Range
Contact Size Insulation Overall Diameter (min-max) Wire Range
20 Ø1.6mm - Ø2.6mm 20 - 30 AWG
73
Dimensions Square Flange Receptacle
Shell Size: 10 Number of Contacts: 6 Contact Size: 20
Sealing: IP67 Salt Spray: 48h
Square Flange Receptacle Panel Cutout
Figure 14
Square Flange Receptacle
Figure 10 Female RT0W0106PNH
Square Flange Receptacle
Figure 11 Female RT0W0106SNH
Square Flange Receptacle with O-ring Seal and
End Cap with Individual Rear Wire Seal
Figure 12 Male RT0W0106PNHEC
Square Flange Receptacle with O-ring Seal
and End Cap with Individual Rear Wire Seal
Figure 13 Female RT0W0106SNHEC
74
Connector Solutions
Dimensions Backshell
Shell Size: 10 Number of Contacts: 6 Contact Size: 20
Sealing: IP67 Salt Spray: 48h
6 POSITIONS
5A, 7.5A /
150V
Short Cord Grip (straight)
Figure 15
Long Cord Grip (straight)
Figure 16
Locking Clip with Lanyard
108039110
Plug Dustcap with Chain
RT610DCG
Plug Dustcap without Chain
RT610DC
Receptacle Dustcap with Chain
RT010DCG
Receptacle Dustcap with Nylon
Cord, Made of Rubber
RT010RL
Receptacle Dustcap
without Chain
RT010DC
Receptacle Dustcap without
Nylon Cord, Rubber Material
RB00011910
Sealing Plug
CA402059
Square Flange Receptacle
Gaskets, Thickness 0.8mm (±0.2)
RTFD10B
Accessories
NEW!
See
Page
16
75
Shell Size: 10 Number of Contacts: 6 Contact Size: 20
Sealing: IP67 Salt Spray: 48h
Contacts
Crimp Contacts, Machined (7.5A)
Part Number AWG Wire
Range
(mm²)
Plating
Male Female
MP20W23F MS20W23F 22-20 .34-.50 Gold Flash
MP20W23G5 MS20W23G5 22-20 .34-.50 Gold 5µ”
MP20W23G10 MS20W23G10 22-20 .34-.50 Gold 10µ”
MP20W23G15 MS20W23G15 22-20 .34-.50 Gold 15µ”
MP20W23G30 MS20W23G30 22-20 .34-.50 Gold 30µ”
MP24W23F MS24W23F 26-24 .13-.25 Gold Flash
MP24W23G5 MS24W23G5 26-24 .13-.25 Gold 5µ”
MP24W23G10 MS24W23G10 26-24 .13-.25 Gold 10µ”
MP24W23G15 MS24W23G15 26-24 .13-.25 Gold 15µ”
MP24W23G30 MS24W23G30 26-24 .13-.25 Gold 30µ”
MP28W23F MS28W23F 30-28 .05-.08 Gold Flash
MP28W23G5 MS28W23G5 30-28 .05-.08 Gold 5µ”
MP28W23G10 MS28W23G10 30-28 .05-.08 Gold 10µ”
MP28W23G15 MS28W23G15 30-28 .05-.08 Gold 15µ”
MP28W23G30 MS28W23G30 30-28 .05-.08 Gold 30µ”
Machined Contacts
Contact Extraction Tool,
#20 (Ø 1.0) Contact
QXRT20
Tools
Hand Crimp Tool for
Machined Contacts
MFX-3959
Pneumatic Crimp Tool for
Machined Contact
MFX-3960
76
Connector Solutions
6 POSITIONS
5A, 7.5A /
150V
Shell Size: 10 Number of Contacts: 6 Contact Size: 20
Sealing: IP67 Salt Spray: 48h
Contacts (con’t)
SP20W1F SS20W1F 22-20 .34-.50 Gold Flash
SP20W1G5 SS20W1G5 22-20 .34-.50 Gold 5µ”
SP20W1G10 SS20W1G10 22-20 .34-.50 Gold 10µ”
SP20W1G15 SS20W1G15 22-20 .34-.50 Gold 15µ”
SP20W1G30 SS20W1G30 22-20 .34-.50 Gold 30µ”
SP24W1F SS24W1F 26-24 .14-.25 Gold Flash
SP24W1G5 SS24W1G5 26-24 .14-.25 Gold 5µ”
SP24W1G10 SS24W1G10 26-24 .14-.25 Gold 10µ”
SP24W1G15 SS24W1G15 26-24 .14-.25 Gold 15µ”
SP24W1G30 SS24W1G30 26-24 .14-.25 Gold 30µ”
SP28W1F SS28W1F 30-28 .05-.08 Gold Flash
SP28W1G5 SS28W1G5 30-28 .05-.08 Gold 5µ”
SP28W1G10 SS28W1G10 30-28 .05-.08 Gold 10µ”
SP28W1G15 SS28W1G15 30-28 .05-.08 Gold 15µ”
SP28W1G30 SS28W1G30 30-28 .05-.08 Gold 30µ”
Crimp Contacts, Stamped & Formed (5A)
Part Number AWG Wire
Range
(mm²)
Plating
Male Female
Stamped & Formed Contacts
Contact Extraction Tool,
#20 (Ø 1.0) Contact
QXRT20
Tools
Hand Tool for Stamped & Formed
Contact, Size 20, 20-28AWG
MFX-3958
Crimp Die for Stamped &
Formed Contact
MFX-3957
77
Backshell
Jam Nut Receptacles
Plug
Square Flange
Receptacles
STEP 1
Choose Receptacle Style
OR
STEP 2
Choose Plug Style
S
TEP 2
Choose Backshell Style
Plug Kit Including Connector,
Backshell & Contacts
CONTACTS SOLD SEPARATELY SEE PAGE 84
SEE TABLE ON NEXT PAGE FOR PART DETAILS
Square Flange
Receptacle Kit Including
Receptacle,Gasket
& Contacts
Jam Nut Receptacle Kit
Including Receptacle
& Contacts
RT0S12CGNS1
RT0S12CGNS2
RT0L12CGNS1
RT0L12CGNS2
RT0B12CGNS1
RT0B12CGNS2
RT07128PNH
RT07128SNH
RT07128PNHEC
RT07128SNHEC
RT06128PNH
RT06128SNH
RT06128SNHEC
RT06128PNHEC
RT00128PNH
RT00128SNH
RT00128PNHEC
RT00128SNHEC
OR
78
Connector Solutions
8 POSITIONS
13A / 250V
Insert Arrangement
Pin (Male) Faceview
Connector Part Numbers
Part Number Connector Type Figure Drawings
Male Female Male Female
RT07128PNH RT07128SNH Jam Nut Receptacle 1,5 2,5
RT07128PNHEC RT07128SNHEC Jam Nut Receptacle with O-ring Seal and
End Cap with Individual Rear Wire Seal** 3,5 4,5
RT07128PNHK RT07128SNHK Jam Nut Receptacle Kit 1,5 2,5
RT06128PNH RT06128SNH Plug 6 7
RT06128PNHEC RT06128SNHEC Plug with O-ring Seal and End Cap
with Individual Rear Wire Seal** 8 9
RT06128PNHK RT06128SNHK Plug Kit 6 7
RT00128PNH RT00128SNH Square Flange Receptacle 10 11,14
RT00128PNHEC RT00128SNHEC Square Flange Receptacle with O-ring Seal
and End Cap with
Individual Rear Wire Seal** 12,14 13,14
RT00128PNHK RT00128SNHK Square Flange Receptacle Kit 10,14 11,14
Contacts supplied separately see page 84
**See page 81 for the real seal wire range
Backshells
Part Number Backshell Type Cable Range (mm) Figure Drawings Shielding
RT0S12CGNS1 Short Cord Grip (straight) 6-10.5 15
RT0S12CGNS2 Short Cord Grip (straight) 8.5-12.5 15
RT0L12CGNS1 Long Cord Grip (straight) 6-10.5 16
RT0L12CGNS2 Long Cord Grip (straight) 8.5-12.5 16
RT0B12CGNS1 Cord Grip (90°) 6-10.5 17
RT0B12CGNS2 Cord Grip (90°) 8.0-12.5 17
Shell Size: 12 Number of Contacts: 8 Contact Size: 16
Sealing: IP67 Salt Spray: 48h
*Connector parts with part numbers ending in EC (with an end cap) were not available for submittal at the time of UL certication.
An upgraded silicone seal is available for all connector parts.
Please add “03” to the end of the part number when ordering.
Operating Temperature: -40°C to +125°C. Not available in kits.
eco|mate® rm
Standard Products
• Suitable For Indoor and Outdoor Applications
• EMI/RMI Shielding Capability with Appropriate Backshell
• Operating Temperature: -40°C to +105°C
• 500 Mating Cycles
• Contacts and Cord Grips Ordered Separately
• UL ECBT2 Certied*
79
Dimensions Jam Nut Receptacle
Shell Size: 12 Number of Contacts: 8 Contact Size: 16
Sealing: IP67 Salt Spray: 48h
Jam Nut Receptacle Panel Cutout
Figure 5
Jam Nut Receptacle
Figure 1 Male RT07128PNH
Jam Nut Receptacle
Figure 2 Female RT07128SNH
Jam Nut Receptacle with O-ring Seal and
End Cap with Individual Rear Wire Seal
Figure 3 Male RT07128PNHEC
Jam Nut Receptacle with O-ring Seal and
End Cap with Individual Rear Wire Seal
Figure 4 Female RT07128SNHEC
80
Connector Solutions
Dimensions Plug
Shell Size: 12 Number of Contacts: 8 Contact Size: 16
Sealing: IP67 Salt Spray: 48h
8 POSITIONS
13A / 250V
Plug
Figure 6 Male RT06128PNH
Plug
Figure 7 Female RT06128SNH
Plug with O-ring Seal and End Cap with
Individual Rear Wire Seal
Figure 9 Female RT06128SNHEC
Plug with O-ring Seal and End Cap with
Individual Rear Wire Seal
Figure 8 Male RT06128PNHEC
Individual Sealing Wire Range
Contact Size Insulation Overall Diameter (min-max) Wire Range
16 Ø2.0mm - Ø3.2mm 14 - 24 AWG
81
Dimensions Square Flange Receptacle
Shell Size: 12 Number of Contacts: 8 Contact Size: 16
Sealing: IP67 Salt Spray: 48h
Square Flange Receptacle Panel Cutout
Figure 14
Square Flange Receptacle
Figure 10 Male RT00128PNH
Square Flange Receptacle
Figure 11 Female RT00128SNH
Square Flange Receptacle with O-ring Seal and
End Cap with Individual Rear Wire Seal
Figure 12 Male RT00128PNHEC
Square Flange Receptacle with O-ring Seal
and End Cap with Individual Rear Wire Seal
Figure 13 Female RT00128SNHEC
82
Connector Solutions
Dimensions Backshell
Shell Size: 12 Number of Contacts: 8 Contact Size: 16
Sealing: IP67 Salt Spray: 48h
8 POSITIONS
13A / 250V
Accessories
Short Cord Grip (straight)
Figure 15
Long Cord Grip (straight)
Figure 16
Cord Grip (90°)
Figure 17
Locking Clip with Lanyard
108039112
Plug Dustcap with Chain
RT612DCG
Plug Dustcap without Chain
RT612DC
Receptacle Dustcap with Chain
RT012DCG
Receptacle Dustcap with Nylon
Cord, Made of Rubber
RT012RL
Receptacle Dustcap without
Chain
RT012DC
Receptacle Dustcap without
Nylon Cord, Rubber Material
RB00011912
Sealing Plug
CA401659
Square Flange Receptacle
Gaskets, Thickness 0.8mm (±0.2)
RTFD12B
NEW!
see
Page
16
83
Shell Size: 12 Number of Contacts: 8 Contact Size: 16
Sealing: IP67 Salt Spray: 48h
Contacts
Crimp Contacts, Machined
Part Number AWG Wire
Range
(mm²)
Plating
Male Female
MP14M23F MS14M23F 14 2.0-2.5 Gold Flash
MP14M23G5 MS14M23G5 14 2.0-2.5 Gold 5µ”
MP14M23G10 MS14M23G10 14 2.0-2.5 Gold 10µ”
MP14M23G15 MS14M23G15 14 2.0-2.5 Gold 15µ”
MP14M23G30 MS14M23G30 14 2.0-2.5 Gold 30µ”
MP16M23F MS16M23F 18-16 .75-1.5 Gold Flash
MP16M23G5 MS16M23G5 18-16 .75-1.5 Gold 5µ”
MP16M23G10 MS16M23G10 18-16 .75-1.5 Gold 10µ”
MP16M23G15 MS16M23G15 18-16 .75-1.5 Gold 15µ”
MP16M23G30 MS16M23G30 18-16 .75-1.5 Gold 30µ”
MP20M23F MS20M23F 22-20 .34-.50 Gold Flash
MP20M23G5 MS20M23G5 22-20 .34-.50 Gold 5µ”
MP20M23G10 MS20M23G10 22-20 .34-.50 Gold 10µ”
MP20M23G15 MS20M23G15 22-20 .34-.50 Gold 15µ”
MP20M23G30 MS20M23G30 22-20 .34-.50 Gold 30µ”
MP24M23F MS24M23F 26-24 .14-.25 Gold Flash
MP24M23G5 MS24M23G5 26-24 .14-.25 Gold 5µ”
MP24M23G10 MS24M23G10 26-24 .14-.25 Gold 10µ”
MP24M23G15 MS24M23G15 26-24 .14-.25 Gold 15µ”
MP24M23G30 MS24M23G30 26-24 .14-.25 Gold 30µ”
Machined Contacts
Tools
Contact Extraction Tool,
#16 (Ø 1.6) Contact
QXRT16
Hand Crimp Tool for
Machined Contacts
MFX-3959
Pneumatic Crimp Tool for
Machined Contacts
MFX-3960
84
Connector Solutions
8 POSITIONS
13A / 250V
Shell Size: 12 Number of Contacts: 8 Contact Size: 16
Sealing: IP67 Salt Spray: 48h
Contacts (con’t)
SP14M1F SS14M1F 14 2.0-2.5 Gold Flash
SP14M1G5 SS14M1G5 14 2.0-2.5 Gold 5µ”
SP14M1G10 SS14M1G10 14 2.0-2.5 Gold 10µ”
SP14M1G15 SS14M1G15 14 2.0-2.5 Gold 15µ”
SP14M1G30 SS14M1G30 14 2.0-2.5 Gold 30µ”
SP16M1F SS16M1F 18-16 .75-1.5 Gold Flash
SP16M1G5 SS16M1G5 18-16 .75-1.5 Gold 5µ”
SP16M1G10 SS16M1G10 18-16 .75-1.5 Gold 10µ”
SP16M1G15 SS16M1G15 18-16 .75-1.5 Gold 15µ”
SP16M1G30 SS16M1G30 18-16 .75-1.5 Gold 30µ”
SP20M1F SS20M1F 22-20 .34-.50 Gold Flash
SP20M1G5 SS20M1G5 22-20 .34-.50 Gold 5µ”
SP20M1G10 SS20M1G10 22-20 .34-.50 Gold 10µ”
SP20M1G15 SS20M1G15 22-20 .34-.50 Gold 15µ”
SP20M1G30 SS20M1G30 22-20 .34-.50 Gold 30µ”
SP24M1F SS24M1F 22-20 .14-.25 Gold Flash
SP24M1G5 SS24M1G5 26-24 .14-.25 Gold 5µ”
SP24M1G10 SS24M1G10 26-24 .14-.25 Gold 10µ”
SP24M1G15 SS24M1G15 26-24 .14-.25 Gold 15µ”
SP24M1G30 SS24M1G30 26-24 .14-.25 Gold 30µ”
Crimp Contacts, Stamped & Formed
Part Number AWG Wire
Range
(mm²)
Plating
Male Female
Stamped & Formed Contacts
Tools
Contact Extraction Tool,
#16 (Ø 1.6) Contact
QXRT16
Crimp Die for Stamped &
Formed Contact
MFX-3957
Hand Tool, Stamped & Formed
Contact, Size 16, 20-14AWG
MFX-3954
85
Backshell
Jam Nut Receptacles
Plug
Square Flange
Receptacles
STEP 1
Choose Receptacle Style
OR
STEP 2
Choose Plug Style
S
TEP 2
Choose Backshell Style
CONTACTS SOLD SEPARATELY SEE PAGE 92
SEE TABLE ON NEXT PAGE FOR PART DETAILS
RT0S14CGNS1
RT0S14CGNS2
RT0L14CGNS1
RT0L14CGNS2
RT0B14CGNS1
RT0B14CGNS2
RT07148PNH
RT07148SNH
RT07148PNHEC
RT07148SNHEC
RT06148SNH
RT06148PNH
RT06148PNHEC
RT06148SNHEC
RT00148PNH
RT00148SNH
RT00148PNHEC
RT00148SNHEC
86
Connector Solutions
8 POSITIONS
13A / 300V
Insert Arrangement
Pin (Male) Faceview
Connector Part Numbers
Part Number Connector Type Figure Drawings
Male Female Male Female
RT07148PNH RT07148SNH Jam Nut Receptacle with O-ring Seal 1,5 2,5
RT07148PNHEC RT07148SNHEC Jam Nut Receptacle with O-ring Seal
and End Cap with Individual
Rear Wire Seal** 3,5 4,5
RT06148PNH RT06148SNH Plug with O-ring Seal 6 7
RT06148PNHEC RT06148SNHEC Plug with O-ring Seal and End Cap
with Individual Rear Wire Seal** 8 9
RT00148PNH RT00148SNH Square Flange Receptacle
with O-ring Seal** 10,14 11,14
RT00148PNHEC RT00148SNHEC Square Flange Receptacle with O-ring
Seal and End Cap with
Individual Rear Wire Seal** 12,14 13,14
Contacts supplied separately see page 92
**See page 89 for the real seal wire range
Backshells
Part Number Backshell Type Cable Range (mm) Figure Drawings Shielding
RT0S14CGNS1 Short Cord Grip (straight) 6-10.5 15
RT0S14CGNS2 Short Cord Grip (straight) 8.5-12.5 15
RT0L14CGNS1 Long Cord Grip (straight) 6-10.5 16
RT0L14CGNS2 Long Cord Grip (straight) 8.5-12.5 16
RT0B14CGNS1 Cord Grip (90°) 6-10.5 17
RT0B14CGNS2 Cord Grip (90°) 8.0-12.5 17
Shell Size: 14 Number of Contacts: 8 Contact Size: 16
Sealing: IP67 Salt Spray: 48h
*Connector parts with part numbers ending in EC (with an end cap) were not available for submittal at the time of UL certication.
An upgraded silicone seal is available for all connector parts.
Please add “03” to the end of the part number when ordering.
Operating Temperature: -40°C to +125°C. Not available in kits.
eco|mate® rm
Standard Products
• Suitable For Indoor and Outdoor Applications
• EMI/RMI Shielding Capability with Appropriate Backshell
• Operating Temperature: -40°C to +105°C
• 500 Mating Cycles
• Contacts and Cord Grips Ordered Separately
• UL ECBT2 Certied*
87
Dimensions Jam Nut Receptacle
Shell Size: 14 Number of Contacts: 8 Contact Size: 16
Sealing: IP67 Salt Spray: 48h
Jam Nut Receptacle Panel Cutout
Figure 5
Jam Nut Receptacle with O-ring Seal
Figure 1 Male RT07148PNH
Jam Nut Receptacle with O-ring Seal
Figure 2 Female RT07148SNH
Jam Nut Receptacle with O-ring Seal and
End Cap with Individual Rear Wire Seal
Figure 3 Male RT07148PNHEC
Jam Nut Receptacle with O-ring Seal and
End Cap with Individual Rear Wire Seal
Figure 4 Female RT07148SNHEC
88
Connector Solutions
Dimensions Plug
Shell Size: 14 Number of Contacts: 8 Contact Size: 16
Sealing: IP67 Salt Spray: 48h
Plug with O-ring Seal
Figure 6 Male RT06148PNH
Plug with O-ring Seal
Figure 7 Female RT06148SNH
Plug with O-ring Seal and End Cap with
Individual Rear Wire Seal
Figure 8 Male RT06148PNHEC
Plug with O-ring Seal and End Cap with
Individual Rear Wire Seal
Figure 9 Female RT06148SNHEC
8 POSITIONS
13A / 300V
Individual Sealing Wire Range
Contact Size Insulation Overall Diameter (min-max) Wire Range
16 Ø2.0mm - Ø3.2mm 14 - 24 AWG
89
Dimensions Square Flange Receptacle
Shell Size: 14 Number of Contacts: 8 Contact Size: 16
Sealing: IP67 Salt Spray: 48h
Square Flange Receptacle Panel Cutout
Figure 14
Square Flange Receptacle with O-ring Seal
Figure 10 Male RT00148PNH
Square Flange Receptacle with O-ring Seal
Figure 11 Female RT00148SNH
Square Flange Receptacle with O-ring Seal and
End Cap with Individual Rear Wire Seal
Figure 12 Male RT00148PNHEC
Square Flange Receptacle with O-ring Seal
and End Cap with Individual Rear Wire Seal
Figure 13 Female RT00148SNHEC
90
Connector Solutions
Dimensions Backshell
Shell Size: 14 Number of Contacts: 8 Contact Size: 16
Sealing: IP67 Salt Spray: 48h
8 POSITIONS
13A / 300V
Accessories
Short Cord Grip (straight)
Figure 15
Long Cord Grip (straight)
Figure 16
Cord Grip (90°)
Figure 17
Locking Clip with Lanyard
108039114
Plug Dustcap with Chain
RT614DCG
Plug Dustcap without Chain
RT614DC
Receptacle Dustcap with Chain
RT014DCG
Receptacle Dustcap with Nylon
Cord, Made of Rubber
RT014RL
Receptacle Dustcap
without Chain
RT014DC
Receptacle Dustcap without
Nylon Cord, Rubber Material
RB00011914
Sealing Plug
CA401659
Square Flange Receptacle
Gaskets, Thickness 0.8mm (±0.2)
RTFD12B
NEW!
See
Page
16
91
Shell Size: 14 Number of Contacts: 8 Contact Size: 16
Sealing: IP67 Salt Spray: 48h
Contacts
Crimp Contacts, Machined
Part Number AWG Wire
Range
(mm²)
Plating
Male Female
MP14M23F MS14M23F 14 2.0-2.5 Gold Flash
MP14M23G5 MS14M23G5 14 2.0-2.5 Gold 5µ”
MP14M23G10 MS14M23G10 14 2.0-2.5 Gold 10µ”
MP14M23G15 MS14M23G15 14 2.0-2.5 Gold 15µ”
MP14M23G30 MS14M23G30 14 2.0-2.5 Gold 30µ”
MP16M23F MS16M23F 18-16 .75-1.5 Gold Flash
MP16M23G5 MS16M23G5 18-16 .75-1.5 Gold 5µ”
MP16M23G10 MS16M23G10 18-16 .75-1.5 Gold 10µ”
MP16M23G15 MS16M23G15 18-16 .75-1.5 Gold 15µ”
MP16M23G30 MS16M23G30 18-16 .75-1.5 Gold 30µ”
MP20M23F MS20M23F 22-20 .34-.50 Gold Flash
MP20M23G5 MS20M23G5 22-20 .34-.50 Gold 5µ”
MP20M23G10 MS20M23G10 22-20 .34-.50 Gold 10µ”
MP20M23G15 MS20M23G15 22-20 .34-.50 Gold 15µ”
MP20M23G30 MS20M23G30 22-20 .34-.50 Gold 30µ”
MP24M23F MS24M23F 26-24 .14-.25 Gold Flash
MP24M23G5 MS24M23G5 26-24 .14-.25 Gold 5µ”
MP24M23G10 MS24M23G10 26-24 .14-.25 Gold 10µ”
MP24M23G15 MS24M23G15 26-24 .14-.25 Gold 15µ”
MP24M23G30 MS24M23G30 26-24 .14-.25 Gold 30µ”
Machined Contacts
Tools
Contact Extraction Tool,
#16 (Ø 1.6) Contact
Hand Crimp Tool for
Machined Contacts
MFX-3959
Pneumatic Crimp Tool for
Machined Contacts
MFX-3960
QXRT16
92
Connector Solutions
8 POSITIONS
13A / 300V
Shell Size: 14 Number of Contacts: 8 Contact Size: 16
Sealing: IP67 Salt Spray: 48h
Contacts (con’t)
Crimp Contacts, Stamped & Formed
Part Number AWG Wire
Range
(mm²)
Plating
Male Female
SP14M1F SS14M1F 14 2.0-2.5 Gold Flash
SP14M1G5 SS14M1G5 14 2.0-2.5 Gold 5µ”
SP14M1G10 SS14M1G10 14 2.0-2.5 Gold 10µ”
SP14M1G15 SS14M1G15 14 2.0-2.5 Gold 15µ”
SP14M1G30 SS14M1G30 14 2.0-2.5 Gold 30µ”
SP16M1F SS16M1F 18-16 .75-1.5 Gold Flash
SP16M1G5 SS16M1G5 18-16 .75-1.5 Gold 5µ”
SP16M1G10 SS16M1G10 18-16 .75-1.5 Gold 10µ”
SP16M1G15 SS16M1G15 18-16 .75-1.5 Gold 15µ”
SP16M1G30 SS16M1G30 18-16 .75-1.5 Gold 30µ”
SP20M1F SS20M1F 22-20 .34-.50 Gold Flash
SP20M1G5 SS20M1G5 22-20 .34-.50 Gold 5µ”
SP20M1G10 SS20M1G10 22-20 .34-.50 Gold 10µ”
SP20M1G15 SS20M1G15 22-20 .34-.50 Gold 15µ”
SP20M1G30 SS20M1G30 22-20 .34-.50 Gold 30µ”
SP24M1F SS24M1F 22-20 .14-.25 Gold Flash
SP24M1G5 SS24M1G5 26-24 .14-.25 Gold 5µ”
SP24M1G10 SS24M1G10 26-24 .14-.25 Gold 10µ”
SP24M1G15 SS24M1G15 26-24 .14-.25 Gold 15µ”
SP24M1G30 SS24M1G30 26-24 .14-.25 Gold 30µ”
Stamped & Formed Contacts
Tools
Contact Extraction Tool,
#16 (Ø 1.6) Contact
Crimp Die for Stamped
& Formed Contact
MFX-3957
Hand Tool, Stamped & Formed
Contact, Size16, 20-14AWG
MFX-3954
QXRT16
93
Backshell
Jam Nut Receptacles
Plug
Square Flange
Receptacles
STEP 1
Choose Receptacle Style
OR
STEP 2
Choose Plug Style
S
TEP 2
Choose Backshell Style
CONTACTS SOLD SEPARATELY SEE PAGE 100
SEE TABLE ON NEXT PAGE FOR PART DETAILS
RT0S18CGNS1
RT0S18CGNS2
RT0L18CGNS1
RT0L18CGNS2
RT07188PNH
RT07188SNH
RT07188PNHEC
RT07188SNHEC
RT06188PNH
RT06188SNH
RT06188PNHEC
RT06188SNHEC
RT00188PNH
RT00188SNH
RT00188PNHEC
RT00188SNHEC
94
Connector Solutions
8 POSITIONS
23A / 375V
Insert Arrangement
Pin (Male) Faceview
Connector Part Numbers
Part Number Connector Type Figure Drawings
Male Female Male Female
RT07188PNH RT07188SNH Jam Nut Receptacle 1,5 2,5
RT07188PNHEC RT07188SNHEC Jam Nut Receptacle with O-ring Seal and
End Cap with
Individual Rear Wire Seal** 3,5 4,5
RT06188PNH RT06188SNH Plug 6 7
RT06188PNHEC RT06188SNHEC Plug with O-ring Seal and
End Cap with Individual Rear Wire Seal** 8 9
RT00188PNH RT00188SNH Square Flange Receptacle 10,14 11,14
RT00188PNHEC RT00188SNHEC Square Flange Receptacle with O-ring
Seal and End Cap with
Individual Rear Wire Seal** 12,14 13,14
Contacts supplied separately see page 100
**See page 97 for the real seal wire range
Backshells
Part Number Backshell Type Cable Range (mm) Figure Drawings Shielding
RT0S18CGNS1 Short Cord Grip (straight) 9.0-14.5 15
RT0S18CGNS2 Short Cord Grip (straight) 13.5-17 15
RT0L18CGNS1 Long Cord Grip (straight) 9.0-14.5 16
RT0L18CGNS2 Long Cord Grip (straight) 13.5-17 16
Shell Size: 18 Number of Contacts: 8 Contact Size: 2.5mm
Sealing: IP67 Salt Spray: 48h
An upgraded silicone seal is available for all connector parts.
Please add “03” to the end of the part number when ordering.
Operating Temperature: -40°C to +125°C. Not available in kits.
eco|mate® rm
Standard Products
• Suitable For Indoor and Outdoor Applications
• EMI/RMI Shielding Capability with Appropriate Backshell
• Operating Temperature: -40°C to +105°C
• 500 Mating Cycles
• Contacts and Cord Grips Ordered Separately
• UL ECBT2 Certied*
*Connector parts with part numbers ending in EC (with an end cap) were not available for submittal at the time of UL certication.
95
Dimensions Jam Nut Receptacle
Shell Size: 18 Number of Contacts: 8 Contact Size: 2.5mm
Sealing: IP67 Salt Spray: 48h
Jam Nut Receptacle Panel Cutout
Figure 5
Jam Nut Receptacle
Figure 1 Male RT07188PNH
Jam Nut Receptacle
Figure 2 Female RT07188SNH
Jam Nut Receptacle with O-ring Seal and
End Cap with Individual Rear Wire Seal
Figure 3 Male RT07188PNHEC
Jam Nut Receptacle with O-ring Seal and
End Cap with Individual Rear Wire Seal
Figure 4 Female RT07188SNHEC
96
Connector Solutions
Dimensions Plug
Shell Size: 18 Number of Contacts: 8 Contact Size: 2.5mm
Sealing: IP67 Salt Spray: 48h
8 POSITIONS
23A / 375V
Plug
Figure 6 Male RT06188PNH
Plug
Figure 7 Female RT06188SNH
Plug with O-ring Seal and End Cap with
Individual Rear Wire Seal
Figure 8 Male RT06188PNHEC
Plug with O-ring Seal and End Cap with
Individual Rear Wire Seal
Figure 9 Female RT06188SNHEC
Individual Sealing Wire Range
Contact Size Insulation Overall Diameter (min-max) Wire Range
2.5mm Ø3.3mm - Ø4.3mm 14 - 12 AWG
97
Dimensions Square Flange Receptacle
Shell Size: 18 Number of Contacts: 8 Contact Size: 2.5mm
Sealing: IP67 Salt Spray: 48h
Square Flange Receptacle Panel Cutout
Figure 14
Square Flange Receptacle
Figure 10 Male RT00188PNH
Square Flange Receptacle
Figure 11 Female RT00188SNH
Square Flange Receptacle with O-ring Seal and
End Cap with Individual Rear Wire Seal
Figure 12 Male RT00188PNHEC
Square Flange Receptacle with O-ring Seal and
End Cap with Individual Rear Wire Seal
Figure 13 Female RT00188SNHEC
98
Connector Solutions
Dimensions Backshell
Shell Size: 18 Number of Contacts: 8 Contact Size: 2.5mm
Sealing: IP67 Salt Spray: 48h
Short Cord Grip (straight)
Figure 15
Long Cord Grip (straight)
Figure 16
8 POSITIONS
23A / 375V
99
Extraction Tool 2.5mm Contact
QXRT12S
Hand Tool, Stamped & Formed
Contact, 2.5 mm
MFX-3962
Shell Size: 18 Number of Contacts: 8 Contact Size: 2.5mm
Sealing: IP67 Salt Spray: 48h
Contacts
SP12A1T SS12A1T 14-12 2.5-3.5 Tin
no machined contacts are available for this group
Crimp Contacts, Stamped & Formed
Part Number AWG Wire
Range
(mm²)
Plating
Male Female
Tools
Stamped & Formed Contacts
100
Connector Solutions
8 POSITIONS
23A / 375V
Accessories
Shell Size: 18 Number of Contacts: 8 Contact Size: 2.5mm
Sealing: IP67 Salt Spray: 48h
Locking Clip with Lanyard
108039118
Plug Dustcap with Chain
RT618DCG
Plug Dustcap without Chain
RT618DC
Receptacle Dustcap with Chain
RT018DCG
Receptacle Dustcap with Nylon
Cord, Made of Rubber
RT018RL
Receptacle Dustcap
without Chain
RT018DC
Receptacle Dustcap without Nylon
Cord, Rubber Material
RB00011918
Sealing Plug
CA401259
Square Flange Receptacle
Gaskets, Thickness 0.8mm (±0.2)
RTFD18B
NEW!
See
Page
16
101
Backshell
Jam Nut Receptacles
Plug
Square Flange
Receptacles
STEP 1
Choose Receptacle Style
OR
STEP 2
Choose Plug Style
S
TEP 2
Choose Backshell Style
CONTACTS SOLD SEPARATELY SEE PAGE 108
SEE TABLE ON NEXT PAGE FOR PART DETAILS
RT0S16CGNS1
RT0S16CGNS2
RT0L16CGNS1
RT0L16CGNS2
RT0B16CGNS1
RT0B16CGNS2
RT071609PNH
RT071609SNH
RT07169PNHEC
RT07169SNHEC
RT061609SNH
RT061609PNH
RT061609PNHEC
RT061609SNHEC
RT00169PNH
RT00169SNH
RT00169PNHEC
RT00169SNHEC
102
Connector Solutions
9 POSITIONS
MIX 23A &
13A / 250V
Insert Arrangement
Pin (Male) Faceview
Connector Part Numbers
Part Number Connector Type Figure Drawings
Male Female Male Female
RT071609PNH RT071609SNH Jam Nut Receptacle with O-ring Seal 1,5 2,5
RT07169PNHEC RT07169SNHEC Jam Nut Receptacle with O-ring Seal
and End Cap with
Individual Rear Wire Seal** 3,5 4,5
RT061609PNH RT061609SNH Plug with O-ring Seal 6 7
RT061609PNHEC RT061609SNHEC Plug with O-ring Seal and End Cap
with Individual Rear Wire Seal** 8 9
RT00169PNH RT00169SNH Square Flange Receptacle
with O-ring Seal 10,14 11,14
RT00169PNHEC RT00169SNHEC Square Flange Receptacle with O-ring
Seal and End Cap with
Individual Rear Wire Seal** 12,14 13,14
Contacts supplied separately see page 108
**See page 105 for the real seal wire range
Backshells
Part Number Backshell Type Cable Range (mm) Figure Drawings Shielding
RT0S16CGNS1 Short Cord Grip (straight) 9.0-14.5 15
RT0S16CGNS2 Short Cord Grip (straight) 13.5-17 15
RT0L16CGNS1 Long Cord Grip (straight) 9.0-14.5 16
RT0L16CGNS2 Long Cord Grip (straight) 13.5-17 16
RT0B16CGNS1 Cord Grip (90°) 9.5-14.5 17
RT0B16CGNS2 Cord Grip (90°) 13.5-17.0 17
Shell Size: 16 Number of Contacts: 9 Contact Size: Mixed 2.5mm & 16
Sealing: IP67 Salt Spray: 48h
*Connector parts with part numbers ending in EC (with an end cap) were not available for submittal at the time of UL certication.
An upgraded silicone seal is available for all connector parts.
Please add “03” to the end of the part number when ordering.
Operating Temperature: -40°C to +125°C. Not available in kits.
eco|mate® rm
Standard Products
• Suitable For Indoor and Outdoor Applications
• EMI/RMI Shielding Capability with Appropriate Backshell
• Operating Temperature: -40°C to +105°C
• 500 Mating Cycles
• Contacts and Cord Grips Ordered Separately
• UL ECBT2 Certied*
103
Dimensions Jam Nut Receptacle
Shell Size: 16 Number of Contacts: 9 Contact Size: Mixed 2.5mm & 16
Sealing: IP67 Salt Spray: 48h
Jam Nut Receptacle Panel Cutout
Figure 5
Jam Nut Receptacle with O-ring Seal
Figure 1 Male RT07169PNH
Jam Nut Receptacle with O-ring Seal
Figure 2 Female RT07169SNH
Jam Nut Receptacle with O-ring Seal and End Cap
with Individual Rear Wire Seal
Figure 3 Male RT07169PNHEC
Jam Nut Receptacle with O-ring Seal and End Cap
with Individual Rear Wire Seal
Figure 4 Female RT07169SNHEC
104
Connector Solutions
Dimensions Plug
Shell Size: 16 Number of Contacts: 9 Contact Size: Mixed 2.5mm & 16
Sealing: IP67 Salt Spray: 48h
9 POSITIONS
MIX 23A &
13A / 250V
Plug with O-ring Seal
Figure 6 Male RT06169PNH
Plug with O-ring Seal
Figure 7 Female RT06169SNH
Plug with O-ring Seal and End Cap with
Individual Rear Wire Seal
Figure 8 Male RT06169PNHEC
Plug with O-ring Seal and End Cap
with Individual Rear Wire Seal
Figure 9 Female RT06169SNHEC
Individual Sealing Wire Range
Contact Size Insulation Overall Diameter (min-max) Wire Range
2.5mm Ø3.3mm - Ø4.3mm 14 - 12 AWG
16 Ø2.0mm - Ø3.2mm 14 - 24 AWG
105
Dimensions Square Flange Receptacle
Shell Size: 16 Number of Contacts: 9 Contact Size: Mixed 2.5mm & 16
Sealing: IP67 Salt Spray: 48h
Square Flange Receptacle Panel Cutout
Figure 14
Square Flange Receptacle with O-ring Seal
Figure 10 Male RT00169PNH
Square Flange Receptacle with O-ring Seal
Figure 11 Female RT00169SNH
Square Flange Receptacle with O-ring Seal and
End Cap with Individual Rear Wire Seal
Figure 12 Male RT00169PNHEC
Square Flange Receptacle with O-ring Seal
and End Cap with Individual Rear Wire Seal
Figure 13 Female RT00169SNHEC
106
Connector Solutions
Dimensions Backshell
Shell Size: 16 Number of Contacts: 9 Contact Size: Mixed 2.5mm & 16
Sealing: IP67 Salt Spray: 48h
9 POSITIONS
MIX 23A &
13A / 250V
Locking Clip with Lanyard
108039116
Plug Dustcap with Chain
RT616DCG
Plug Dustcap without Chain
RT616DC
Receptacle Dustcap with Chain
RT016DCG
Receptacle Dustcap with Nylon
Cord, Made of Rubber
RT016RL
Receptacle Dustcap
without Chain
RT016DC
Receptacle Dustcap without
Nylon Cord, Rubber Material
RB00011916
Sealing Plug
CA401659
Sealing Plug
CA401259
Square Flange Receptacle
Gaskets, Thickness 0.8mm (±0.2)
RTFD16B
NEW!
See
Page
16
Accessories
Short Cord Grip (straight)
Figure 15
Long Cord Grip (straight)
Figure 16
Cord Grip (90°)
Figure 17
107
Shell Size: 16 Number of Contacts: 9 Contact Size: Mixed 2.5mm & 16
Sealing: IP67 Salt Spray: 48h
Contacts
Crimp Contacts, Machined
Part Number Contact
Size AWG Wire
Range
(mm²)
Plating
Male Female
MP14M23F MS14M23F 16 14 2.0-2.5 Gold Flash
MP14M23G5 MS14M23G5 16 14 2.0-2.5 Gold 5µ”
MP14M23G10 MS14M23G10 16 14 2.0-2.5 Gold 10µ”
MP14M23G15 MS14M23G15 16 14 2.0-2.5 Gold 15µ”
MP14M23G30 MS14M23G30 16 14 2.0-2.5 Gold 30µ”
MP16M23F MS16M23F 16 18-16 .75-1.5 Gold Flash
MP16M23G5 MS16M23G5 16 18-16 .75-1.5 Gold 5µ”
MP16M23G10 MS16M23G10 16 18-16 .75-1.5 Gold 10µ”
MP16M23G15 MS16M23G15 16 18-16 .75-1.5 Gold 15µ”
MP16M23G30 MS16M23G30 16 18-16 .75-1.5 Gold 30µ”
MP20M23F MS20M23F 16 22-20 .34-.50 Gold Flash
MP20M23G5 MS20M23G5 16 22-20 .34-.50 Gold 5µ”
MP20M23G10 MS20M23G10 16 22-20 .34-.50 Gold 10µ”
MP20M23G15 MS20M23G15 16 22-20 .34-.50 Gold 15µ”
MP20M23G30 MS20M23G30 16 22-20 .34-.50 Gold 30µ”
MP24M23F MS24M23F 16 26-24 .14-.25 Gold Flash
MP24M23G5 MS24M23G5 16 26-24 .14-.25 Gold 5µ”
MP24M23G10 MS24M23G10 16 26-24 .14-.25 Gold 10µ”
MP24M23G15 MS24M23G15 16 26-24 .14-.25 Gold 15µ”
MP24M23G30 MS24M23G30 16 26-24 .14-.25 Gold 30µ”
Tools
Contact Extraction Tool,
#16 (Ø 1.6) Contact
QXRT16
Hand Crimp Tool for
Machined Contacts
MFX-3959
Pneumatic Crimp Tool for
Machined Contacts
MFX-3960
Machined Contacts
108
Connector Solutions
Crimp Contacts, Stamped & Formed
Part Number Contact
Size AWG Wire
Range
(mm²)
Plating
Male Female
SP12A1T SS12A1T 2.5mm 14-12 2.0-2.5 Tin
SP14M1F SS14M1F 16 14 2.0-2.5 Gold Flash
SP14M1G5 SS14M1G5 16 14 2.0-2.5 Gold 5µ”
SP14M1G10 SS14M1G10 16 14 2.0-2.5 Gold 10µ”
SP14M1G15 SS14M1G15 16 14 2.0-2.5 Gold 15µ”
SP14M1G30 SS14M1G30 16 14 2.0-2.5 Gold 30µ”
SP16M1F SS16M1F 16 18-16 .75-1.5 Gold Flash
SP16M1G5 SS16M1G5 16 18-16 .75-1.5 Gold 5µ”
SP16M1G10 SS16M1G10 16 18-16 .75-1.5 Gold 10µ”
SP16M1G15 SS16M1G15 16 18-16 .75-1.5 Gold 15µ”
SP16M1G30 SS16M1G30 16 18-16 .75-1.5 Gold 30µ”
SP20M1F SS20M1F 16 22-20 .34-.50 Gold Flash
SP20M1G5 SS20M1G5 16 22-20 .34-.50 Gold 5µ”
SP20M1G10 SS20M1G10 16 22-20 .34-.50 Gold 10µ”
SP20M1G15 SS20M1G15 16 22-20 .34-.50 Gold 15µ”
SP20M1G30 SS20M1G30 16 22-20 .34-.50 Gold 30µ”
SP24M1F SS24M1F 16 22-20 .14-.25 Gold Flash
SP24M1G5 SS24M1G5 16 26-24 .14-.25 Gold 5µ”
SP24M1G10 SS24M1G10 16 26-24 .14-.25 Gold 10µ”
SP24M1G15 SS24M1G15 16 26-24 .14-.25 Gold 15µ”
SP24M1G30 SS24M1G30 16 26-24 .14-.25 Gold 30µ”
9 POSITIONS
MIX 23A &
13A / 250V
Shell Size: 16 Number of Contacts: 9 Contact Size: Mixed 2.5mm & 16
Sealing: IP67 Salt Spray: 48h
Contacts (con’t)
Tools
Contact Extraction Tool,
#16 (Ø 1.6) Contact
QXRT16
Crimp Die for Stamped &
Formed Contact
MFX-3957
Extraction Tool 2.5mm Contact
QXRT12S
Hand Tool, Stamped & Formed
Contact, Size 16, 20-14AWG
MFX-3954
Hand Tool, Stamped & Formed
Contact, 2.5 mm
MFX-3962
Stamped & Formed Contacts
2.5mm
109
Backshell
Jam Nut Receptacles
Plug
Square Flange
Receptacles
STEP 1
Choose Receptacle Style
OR
STEP 2
Choose Plug Style
S
TEP 2
Choose Backshell Style
Plug Kit Including Connector,
Backshell & Contacts
CONTACTS SOLD SEPARATELY SEE PAGE 116
SEE TABLE ON NEXT PAGE FOR PART DETAILS
Square Flange
Receptacle Kit Including
Receptacle,Gasket
& Contacts
Jam Nut Receptacle Kit
Including Receptacle
& Contacts
RT0S12CGNS1
RT0S12CGNS2
RT0L12CGNS1
RT0L12CGNS2
RT0B12CGNS1
RT0B12CGNS2
RT0W71210PNH
RT0W71210SNH
RT0W71210PNHEC
RT0W71210SNHEC
RT0W61210PNH
RT0W61210SNH
RT0W61210PNHEC
RT0W61210SNHEC
RT0W01210PNH
RT0W01210SNH
RT0W01210PNHEC
RT0W01210SNHEC
OR
110
Connector Solutions
10 POSITIONS
5A / 150V
Insert Arrangement
Pin (Male) Faceview
Connector Part Numbers
Part Number Connector Type Figure Drawings
Male Female Male Female
RT0W71210PNH RT0W71210SNH Jam Nut Receptacle 1,5 2,5
RT0W71210PNHEC RT0W71210SNHEC Jam Nut Receptacle with O-ring Seal
and End Cap with
Individual Rear Wire Seal** 3,5 4,5
RT0W71210PNHK RT0W71210SNHK Jam Nut Receptacle Kit 1,5 2,5
RT0W61210PNH RT0W61210SNH Plug 6 7
RT0W61210PNHEC RT0W61210SNHEC Plug with O-ring Seal and End Cap
with Individual Rear Wire Seal** 8 9
RT0W61210PNHK RT0W61210SNHK Plug Kit 6 7
RT0W01210PNH RT0W01210SNH Square Flange Receptacle 10,14 11,14
RT0W01210PNHEC RT0W01210SNHEC Square Flange Receptacle with O-ring
Seal and End Cap with
Individual Rear Wire Seal** 12,14 13,14
RT0W01210PNHK RT0W01210SNHK Square Flange Receptacle Kit 10,14 11,14
Contacts supplied separately see page 116
**See page 113 for the real seal wire range
Backshells
Part Number Backshell Type Cable Range (mm) Figure Drawings Shielding
RT0S12CGNS1 Short Cord Grip (straight) 6-10.5 15
RT0S12CGNS2 Short Cord Grip (straight) 8.5-12.5 15
RT0L12CGNS1 Long Cord Grip (straight) 6-10.5 16
RT0L12CGNS2 Long Cord Grip (straight) 8.5-12.5 16
RT0B12CGNS1 Cord Grip (90°) 6-10.5 17
RT0B12CGNS2 Cord Grip (90°) 8.0-12.5 17
Shell Size: 12 Number of Contacts: 10 Contact Size: 20
Sealing: IP67 Salt Spray: 48h
*Connector parts with part numbers ending in EC (with an end cap) were not available for submittal at the time of UL certication.
An upgraded silicone seal is available for all connector parts.
Please add “03” to the end of the part number when ordering.
Operating Temperature: -40°C to +125°C. Not available in kits.
eco|mate® rm
Standard Products
• Suitable For Indoor and Outdoor Applications
• EMI/RMI Shielding Capability with Appropriate Backshell
• Operating Temperature: -40°C to +105°C
• 500 Mating Cycles
• Contacts and Cord Grips Ordered Separately
• UL ECBT2 Certied*
111
Dimensions Jam Nut Receptacle
Shell Size: 12 Number of Contacts: 10 Contact Size: 20
Sealing: IP67 Salt Spray: 48h
Jam Nut Receptacle Panel Cutout
Figure 5
Jam Nut Receptacle
Figure 1 Male RT0W71210PNH
Jam Nut Receptacle
Figure 2 Female RT0W71210SNH
Jam Nut Receptacle with O-ring Seal and End Cap
with Individual Rear Wire Seal
Figure 3 Male RT0W71210PNHEC
Jam Nut Receptacle with O-ring Seal and End Cap
with Individual Rear Wire Seal
Figure 4 Female RT0W71210SNHEC
112
Connector Solutions
Dimensions Plug
Shell Size: 12 Number of Contacts: 10 Contact Size: 20
Sealing: IP67 Salt Spray: 48h
Plug
Figure 6 Male RT0W61210PNH
Plug
Figure 7 Female RT0W61210SNH
Plug with O-ring Seal and End Cap with
Individual Rear Wire Seal
Figure 8 Male RT0W61210PNHEC
Plug with O-ring Seal and End Cap with
Individual Rear Wire Seal
Figure 9 Female RT0W61210SNHEC
10 POSITIONS
5A / 150V
Individual Sealing Wire Range
Contact Size Insulation Overall Diameter (min-max) Wire Range
20 Ø1.6mm - Ø2.6mm 20 - 30 AWG
113
Dimensions Square Flange Receptacle
Shell Size: 12 Number of Contacts: 10 Contact Size: 20
Sealing: IP67 Salt Spray: 48h
Square Flange Receptacle Panel Cutout
Figure 14
Square Flange Receptacle
Figure 10 Male RT0W01210PNH
Square Flange Receptacle
Figure 11 Female RT0W01210SNH
Square Flange Receptacle with O-ring Seal and
End Cap with Individual Rear Wire Seal
Figure 12 Male RT0W01210PNHEC
Square Flange Receptacle with O-ring Seal
and End Cap with Individual Rear Wire Seal
Figure 13 Female RT0W01210SNHEC
114
Connector Solutions
Dimensions Backshell
Shell Size: 12 Number of Contacts: 10 Contact Size: 20
Sealing: IP67 Salt Spray: 48h
10 POSITIONS
5A / 150V
Accessories
Short Cord Grip (straight)
Figure 15
Long Cord Grip (straight)
Figure 16
Cord Grip (90°)
Figure 17
Locking Clip with Lanyard
108039112
Plug Dustcap with Chain
RT612DCG
Plug Dustcap without Chain
RT612DC
Receptacle Dustcap with Chain
RT012DCG
Receptacle Dustcap with Nylon
Cord, Made of Rubber
RT012RL
Receptacle Dustcap
without Chain
RT012DC
Receptacle Dustcap without
Nylon Cord, Rubber Material
RB00011912
Sealing Plug
CA402059
Square Flange Receptacle
Gaskets, Thickness 0.8mm (±0.2)
RTFD12B
NEW!
See
Page
16
115
Shell Size: 12 Number of Contacts: 10 Contact Size: 20
Sealing: IP67 Salt Spray: 48h
Contacts
Crimp Contacts, Machined
Part Number AWG Wire
Ranget
(mm²)
Plating
Male Female
MP20W23F MS20W23F 22-20 .34-.50 Gold Flash
MP20W23G5 MS20W23G5 22-20 .34-.50 Gold 5µ”
MP20W23G10 MS20W23G10 22-20 .34-.50 Gold 10µ”
MP20W23G15 MS20W23G15 22-20 .34-.50 Gold 15µ”
MP20W23G30 MS20W23G30 22-20 .34-.50 Gold 30µ”
MP24W23F MS24W23F 26-24 .13-.25 Gold Flash
MP24W23G5 MS24W23G5 26-24 .13-.25 Gold 5µ”
MP24W23G10 MS24W23G10 26-24 .13-.25 Gold 10µ”
MP24W23G15 MS24W23G15 26-24 .13-.25 Gold 15µ”
MP24W23G30 MS24W23G30 26-24 .13-.25 Gold 30µ”
MP28W23F MS28W23F 30-28 .05-.08 Gold Flash
MP28W23G5 MS28W23G5 30-28 .05-.08 Gold 5µ”
MP28W23G10 MS28W23G10 30-28 .05-.08 Gold 10µ”
MP28W23G15 MS28W23G15 30-28 .05-.08 Gold 15µ”
MP28W23G30 MS28W23G30 30-28 .05-.08 Gold 30µ”
Tools
Contact Extraction Tool,
#20 (Ø 1.6) Contact
QXRT20
Hand Crimp Tool for
Machined Contacts
MFX-3959
Pneumatic Crimp Tool for
Machined Contact
MFX-3960
Machined Contacts
116
Connector Solutions
10 POSITIONS
5A / 150V
Shell Size: 12 Number of Contacts: 10 Contact Size: 20
Sealing: IP67 Salt Spray: 48h
Contacts (con’t)
SP20W1F SS20W1F 22-20 .34-.50 Gold Flash
SP20W1G5 SS20W1G5 22-20 .34-.50 Gold 5µ”
SP20W1G10 SS20W1G10 22-20 .34-.50 Gold 10µ”
SP20W1G15 SS20W1G15 22-20 .34-.50 Gold 15µ”
SP20W1G30 SS20W1G30 22-20 .34-.50 Gold 30µ”
SP24W1F SS24W1F 26-24 .14-.25 Gold Flash
SP24W1G5 SS24W1G5 26-24 .14-.25 Gold 5µ”
SP24W1G10 SS24W1G10 26-24 .14-.25 Gold 10µ”
SP24W1G15 SS24W1G15 26-24 .14-.25 Gold 15µ”
SP24W1G30 SS24W1G30 26-24 .14-.25 Gold 30µ”
SP28W1F SS28W1F 30-28 .05-.08 Gold Flash
SP28W1G5 SS28W1G5 30-28 .05-.08 Gold 5µ”
SP28W1G10 SS28W1G10 30-28 .05-.08 Gold 10µ”
SP28W1G15 SS28W1G15 30-28 .05-.08 Gold 15µ”
SP28W1G30 SS28W1G30 30-28 .05-.08 Gold 30µ”
Crimp Contacts, Stamped & Formed
Part Number AWG Wire
Range
(mm²)
Plating
Male Female
Stamped & Formed Contacts
Hand Tool, Stamped & Formed
Contact, Size 20, 20-28AWG
MFX-3958
Tools
Contact Extraction Tool,
#20 (Ø 1.6) Contact
QXRT20
Crimp Die for Stamped &
Formed Contact
MFX-3957
117
Backshell
Jam Nut Receptacles
Plug
Square Flange
Receptacles
STEP 1
Choose Receptacle Style
OR
STEP 2
Choose Plug Style
S
TEP 2
Choose Backshell Style
Plug Kit Including Connector,
Backshell & Contacts
CONTACTS SOLD SEPARATELY SEE PAGE 124
SEE TABLE ON NEXT PAGE FOR PART DETAILS
Square Flange
Receptacle Kit Including
Receptacle,Gasket
& Contacts
Jam Nut Receptacle Kit
Including Receptacle
& Contacts
RT0S14CGNS1
RT0S14CGNS2
RT0L14CGNS1
RT0L14CGNS2
RT0B14CGNS1
RT0B14CGNS2
RT071412PNH
RT071412SNH
RT071412PNHEC
RT071412SNHEC
RT061412PNH
RT061412SNH
RT061412PNHEC
RT061412SNHEC
RT001412PNH
RT001412SNH
RT001412PNHEC
RT001412SNHEC
OR
118
Connector Solutions
12 POSITIONS
13A / 300V
Insert Arrangement
Pin (Male) Faceview
Connector Part Numbers
Part Number Connector Type Figure Drawings
Male Female Male Female
RT071412PNH RT071412SNH Jam Nut Receptacle 1,5 2,5
RT071412PNHEC RT071412SNHEC Jam Nut Receptacle with O-ring Seal
and End Cap with
Individual Rear Wire Seal** 3,5 4,5
RT071412PNHK RT071412SNHK Jam Nut Receptacle Kit 1,5 2,5
RT061412PNH RT061412SNH Plug 6 7
RT061412PNHEC RT061412SNHEC Plug with O-ring Seal and End Cap
with Individual Rear Wire Seal** 8 9
RT061412PNHK RT061412SNHK Plug Kit 6 7
RT001412PNH RT001412SNH Square Flange Receptacle 10,14 11,14
RT001412PNHEC RT001412SNHEC Square Flange Receptacle with O-ring
Seal and End Cap with
Individual Rear Wire Seal** 12,14 13,14
RT001412PNHK RT001412SNHK Square Flange Receptacle Kit 10,14 11,14
Contacts supplied separately see page 124
**See page 121 for the real seal wire range
Backshells
Part Number Backshell Type Cable Range (mm) Figure Drawings Shielding
RT0S14CGNS1 Short Cord Grip (straight) 6-10.5 15
RT0S14CGNS2 Short Cord Grip (straight) 8.5-12.5 15
RT0L14CGNS1 Long Cord Grip (straight) 6-10.5 16
RT0L14CGNS2 Long Cord Grip (straight) 8.5-12.5 16
RT0B14CGNS1 Cord Grip (90°) 6-10.5 17
RT0B14CGNS2 Cord Grip (90°) 8.0-12.5 17
Shell Size: 14 Number of Contacts: 12 Contact Size: 16
Sealing: IP67 Salt Spray: 48h
*Connector parts with part numbers ending in EC (with an end cap) were not available for submittal at the time of UL certication.
eco|mate® rm
Standard Products
• Suitable For Indoor and Outdoor Applications
• EMI/RMI Shielding Capability with Appropriate Backshell
• Operating Temperature: -40°C to +105°C
• 500 Mating Cycles
• Contacts and Cord Grips Ordered Separately
• UL ECBT2 Certied*
An upgraded silicone seal is available for all connector parts.
Please add “03” to the end of the part number when ordering.
Operating Temperature: -40°C to +125°C. Not available in kits.
119
Dimensions Jam Nut Receptacle
Shell Size: 14 Number of Contacts: 12 Contact Size: 16
Sealing: IP67 Salt Spray: 48h
Jam Nut Receptacle Panel Cutout
Figure 5
Jam Nut Receptacle
Figure 1 Male RT071412PNH
Jam Nut Receptacle
Figure 2 Female RT071412SNH
Jam Nut Receptacle with O-ring Seal and
End Cap with Individual Rear Wire Seal
Figure 3 Male RT071412PNHEC
Jam Nut Receptacle with O-ring Seal and
End Cap with Individual Rear Wire Seal
Figure 4 Female RT071412SNHEC
120
Connector Solutions
Dimensions Plug
Shell Size: 14 Number of Contacts: 12 Contact Size: 16
Sealing: IP67 Salt Spray: 48h
12 POSITIONS
13A / 300V
Plug
Figure 6 Male RT061412PNH
Plug
Figure 7 Female RT061412SNH
Plug with O-ring Seal and End Cap
with Individual Rear Wire Seal
Figure 8 Male RT061412PNHEC
Plug with O-ring Seal and End Cap
with Individual Rear Wire Seal
Figure 9 Female RT061412SNHEC
Individual Sealing Wire Range
Contact Size Insulation Overall Diameter (min-max) Wire Range
16 Ø2.0mm - Ø3.2mm 14 - 24 AWG
121
Dimensions Square Flange Receptacle
Shell Size: 14 Number of Contacts: 12 Contact Size: 16
Sealing: IP67 Salt Spray: 48h
Square Flange Receptacle Panel Cutout
Figure 14
Square Flange Receptacle
Figure 10 Male RT001412PNH
Square Flange Receptacle
Figure 11 Female RT001412SNH
Square Flange Receptacle with O-ring Seal and
End Cap with Individual Rear Wire Seal
Figure 12 Male RT001412PNHEC
Square Flange Receptacle with O-ring Seal
and End Cap with Individual Rear Wire Seal
Figure 13 Female RT001412SNHEC
122
Connector Solutions
Dimensions Backshell
Shell Size: 14 Number of Contacts: 12 Contact Size: 16
Sealing: IP67 Salt Spray: 48h
12 POSITIONS
13A / 300V
Accessories
Short Cord Grip (straight)
Figure 15
Long Cord Grip (straight)
Figure 16
Cord Grip (90°)
Figure 17
Locking Clip with Lanyard
108039114
Plug Dustcap with Chain
RT614DCG
Plug Dustcap without Chain
RT614DC
Receptacle Dustcap with Chain
RT014DCG
Receptacle Dustcap with Nylon
Cord, Made of Rubber
RT014RL
Receptacle Dustcap without
Chain
RT014DC
Receptacle Dustcap without
Nylon Cord, Rubber Material
RB00011914
Sealing Plug
CA401659
Square Flange Receptacle
Gaskets, Thickness 0.8mm (±0.2)
RTFD14B
NEW!
See
Page
16
123
Shell Size: 14 Number of Contacts: 12 Contact Size: 16
Sealing: IP67 Salt Spray: 48h
Contacts
Crimp Contacts, Machined
Part Number AWG Wire
Range
(mm²)
Plating
Male Female
MP14M23F MS14M23F 14 2.0-2.5 Gold Flash
MP14M23G5 MS14M23G5 14 2.0-2.5 Gold 5µ”
MP14M23G10 MS14M23G10 14 2.0-2.5 Gold 10µ”
MP14M23G15 MS14M23G15 14 2.0-2.5 Gold 15µ”
MP14M23G30 MS14M23G30 14 2.0-2.5 Gold 30µ”
MP16M23F MS16M23F 18-16 .75-1.5 Gold Flash
MP16M23G5 MS16M23G5 18-16 .75-1.5 Gold 5µ”
MP16M23G10 MS16M23G10 18-16 .75-1.5 Gold 10µ”
MP16M23G15 MS16M23G15 18-16 .75-1.5 Gold 15µ”
MP16M23G30 MS16M23G30 18-16 .75-1.5 Gold 30µ”
MP20M23F MS20M23F 22-20 .34-.50 Gold Flash
MP20M23G5 MS20M23G5 22-20 .34-.50 Gold 5µ”
MP20M23G10 MS20M23G10 22-20 .34-.50 Gold 10µ”
MP20M23G15 MS20M23G15 22-20 .34-.50 Gold 15µ”
MP20M23G30 MS20M23G30 22-20 .34-.50 Gold 30µ”
MP24M23F MS24M23F 26-24 .14-.25 Gold Flash
MP24M23G5 MS24M23G5 26-24 .14-.25 Gold 5µ”
MP24M23G10 MS24M23G10 26-24 .14-.25 Gold 10µ”
MP24M23G15 MS24M23G15 26-24 .14-.25 Gold 15µ”
MP24M23G30 MS24M23G30 26-24 .14-.25 Gold 30µ”
Machined Contacts
Contact Extraction Tool,
#16 (Ø 1.6) Contact
QXRT16
Tools
Hand Crimp Tool for
Machined Contacts
MFX-3959
Pneumatic Crimp Tool for
Machined Contacts
MFX-3960
124
Connector Solutions
Shell Size: 14 Number of Contacts: 12 Contact Size: 16
Sealing: IP67 Salt Spray: 48h
Contacts (con’t)
SP14M1F SS14M1F 14 2.0-2.5 Gold Flash
SP14M1G5 SS14M1G5 14 2.0-2.5 Gold 5µ”
SP14M1G10 SS14M1G10 14 2.0-2.5 Gold 10µ”
SP14M1G15 SS14M1G15 14 2.0-2.5 Gold 15µ”
SP14M1G30 SS14M1G30 14 2.0-2.5 Gold 30µ”
SP16M1F SS16M1F 18-16 .75-1.5 Gold Flash
SP16M1G5 SS16M1G5 18-16 .75-1.5 Gold 5µ”
SP16M1G10 SS16M1G10 18-16 .75-1.5 Gold 10µ”
SP16M1G15 SS16M1G15 18-16 .75-1.5 Gold 15µ”
SP16M1G30 SS16M1G30 18-16 .75-1.5 Gold 30µ”
SP20M1F SS20M1F 22-20 .34-.50 Gold Flash
SP20M1G5 SS20M1G5 22-20 .34-.50 Gold 5µ”
SP20M1G10 SS20M1G10 22-20 .34-.50 Gold 10µ”
SP20M1G15 SS20M1G15 22-20 .34-.50 Gold 15µ”
SP20M1G30 SS20M1G30 22-20 .34-.50 Gold 30µ”
SP24M1F SS24M1F 22-20 .14-.25 Gold Flash
SP24M1G5 SS24M1G5 26-24 .14-.25 Gold 5µ”
SP24M1G10 SS24M1G10 26-24 .14-.25 Gold 10µ”
SP24M1G15 SS24M1G15 26-24 .14-.25 Gold 15µ”
SP24M1G30 SS24M1G30 26-24 .14-.25 Gold 30µ”
Crimp Contacts, Stamped & Formed
Part Number AWG Wire
Range
(mm²)
Plating
Male Female
Stamped & Formed Contacts
12 POSITIONS
13A / 300V
Contact Extraction Tool,
#16 (Ø 1.6) Contact
QXRT16
Crimp Die for Stamped
& Formed Contact
MFX-3957
Hand Tool, Stamped & Formed
Contact, Size 16, 20-14AWG
MFX-3954
Tools
125
Backshell
Jam Nut Receptacles
Plug
Square Flange
Receptacles
STEP 1
Choose Receptacle Style
OR
STEP 2
Choose Plug Style
S
TEP 2
Choose Backshell Style
Plug Kit Including Connector,
Backshell & Contacts
CONTACTS SOLD SEPARATELY SEE PAGE 132
SEE TABLE ON NEXT PAGE FOR PART DETAILS
Square Flange
Receptacle Kit Including
Receptacle,Gasket
& Contacts
Jam Nut Receptacle Kit
Including Receptacle
& Contacts
RT0S14CGNS1
RT0S14CGNS2
RT0L14CGNS1
RT0L14CGNS2
RT0B14CGNS1
RT0B14CGNS2
RT0W71419PNH
RT0W71419SNH
RT0W71419PNHEC
RT0W71419SNHEC RT0W61419PNH
RT0W61419SNH
RT0W61419PNHEC
RT0W61419SNHEC
RT0W01419PNH
RT0W01419SNH
RT0W01419PNHEC
RT0W01419SNHEC
OR
126
Connector Solutions
19 POSITIONS
5A, 7.5A /
150V
Insert Arrangement
Pin (Male) Faceview
Connector Part Numbers
Part Number Connector Type Figure Drawings
Male Female Male Female
RT0W71419PNH RT0W71419SNH Jam Nut Receptacle 1,5 2,5
RT0W71419PNHEC RT0W71419SNHEC Jam Nut Receptacle with O-ring Seal
and End Cap with
Individual Rear Wire Seal** 3,5 4,5
RT0W71419PNHK RT0W71419SNHK Jam Nut Receptacle Kit 1,5 2,5
RT0W61419PNH RT0W61419SNH Plug 6 7
RT0W61419PNHEC RT0W61419SNHEC Plug with O-ring Seal and End Cap
with Individual Rear Wire Seal** 8 9
RT0W61419PNHK RT0W61419SNHK Plug Kit 1,5 2,5
RT0W01419PNH RT0W01419SNH Square Flange Receptacle 10,14 11,14
RT0W01419PNHEC RT0W01419SNHEC Square Flange Receptacle with O-ring
Seal and End Cap with
Individual Rear Wire Seal** 12,14 13,14
RT0W01419PNHK RT0W01419SNHK Square Flange Receptacle Kit 10,14 11,14
Contacts supplied separately see page 132
**See page 129 for the real seal wire range
Backshells
Part Number Backshell Type Cable Range (mm) Figure Drawings Shielding
RT0S14CGNS1 Short Cord Grip (straight) 6-10.5 15
RT0S14CGNS2 Short Cord Grip (straight) 8.5-12.5 15
RT0L14CGNS1 Long Cord Grip (straight) 6-10.5 16
RT0L14CGNS2 Long Cord Grip (straight) 8.5-12.5 16
RT0B14CGNS1 Cord Grip (90°) 6-10.5 17
RT0B14CGNS2 Cord Grip (90°) 8.0-12.5 17
Shell Size: 14 Number of Contacts: 19 Contact Size: 20
Sealing: IP67 Salt Spray: 48h
*Connector parts with part numbers ending in EC (with an end cap) were not available for submittal at the time of UL certication.
An upgraded silicone seal is available for all connector parts.
Please add “03” to the end of the part number when ordering.
Operating Temperature: -40°C to +125°C. Not available in kits.
eco|mate® rm
Standard Products
• Suitable For Indoor and Outdoor Applications
• EMI/RMI Shielding Capability with Appropriate Backshell
• Operating Temperature: -40°C to +105°C
• 500 Mating Cycles
• Contacts and Cord Grips Ordered Separately
• UL ECBT2 Certied*
127
Dimensions Jam Nut Receptacle
Shell Size: 14 Number of Contacts: 19 Contact Size: 20
Sealing: IP67 Salt Spray: 48h
Jam Nut Receptacle Panel Cutout
Figure 5
Jam Nut Receptacle
Figure 1 Male RT0W71419PNH
Jam Nut Receptacle
Figure 2 Female RT0W71419SNH
Jam Nut Receptacle with O-ring Seal and
End Cap with Individual Rear Wire Seal
Figure 3 Male RT0W71419PNHEC
Jam Nut Receptacle with O-ring Seal and
End Cap with Individual Rear Wire Seal
Figure 4 Female RT0W71419SNHEC
128
Connector Solutions
Dimensions Plug
Shell Size: 14 Number of Contacts: 19 Contact Size: 20
Sealing: IP67 Salt Spray: 48h
19 POSITIONS
5A, 7.5A /
150V
Plug
Figure 6 Male RT0W61419PNH
Plug
Figure 7 Female RT0W61419SNH
Plug with O-ring Seal and End Cap
with Individual Rear Wire Seal
Figure 8 Male RT0W61419PNHEC
Plug with O-ring Seal and End Cap with
Individual Rear Wire Seal
Figure 9 Female RT0W61419SNHEC
Individual Sealing Wire Range
Contact Size Insulation Overall Diameter (min-max) Wire Range
20 Ø1.6mm - Ø2.6mm 20 - 30 AWG
129
Dimensions Square Flange Receptacle
Shell Size: 14 Number of Contacts: 19 Contact Size: 20
Sealing: IP67 Salt Spray: 48h
Square Flange Receptacle Panel Cutout
Figure 14
Square Flange Receptacle
Figure 10 Male RT0W01419PNH
Square Flange Receptacle
Figure 11 Female RT0W01419SNH
Square Flange Receptacle with O-ring Seal and
End Cap with Individual Rear Wire Seal
Figure 12 Male RT0W01419PNHEC
Square Flange Receptacle with O-ring Seal
and End Cap with Individual Rear Wire Seal
Figure 13 Female RT0W01419SNHEC
130
Connector Solutions
Dimensions Backshell
Shell Size: 14 Number of Contacts: 19 Contact Size: 20
Sealing: IP67 Salt Spray: 48h
19 POSITIONS
5A, 7.5A /
150V
Locking Clip with Lanyard
108039114
Plug Dustcap with Chain
RT614DCG
Plug Dustcap without Chain
RT614DC
Receptacle Dustcap with Chain
RT014DCG
Receptacle Dustcap with Nylon
Cord, Made of Rubber
RT014RL
Receptacle Dustcap
without Chain
RT014DC
Receptacle Dustcap without
Nylon Cord, Rubber Material
RB00011914
Sealing Plug
CA402059
Square Flange Receptacle
Gaskets, Thickness 0.8mm (±0.2)
RTFD14B
Accessories
Short Cord Grip (straight)
Figure 15
Long Cord Grip (straight)
Figure 16
Cord Grip (90°)
Figure 17
NEW!
See
Page
16
131
Shell Size: 14 Number of Contacts: 19 Contact Size: 20
Sealing: IP67 Salt Spray: 48h
Contacts
Crimp Contacts, Machined (7.5A Max)
Part Number AWG Wire
Range
(mm²)
Plating
Male Female
MP20W23F MS20W23F 22-20 .34-.50 Gold Flash
MP20W23G5 MS20W23G5 22-20 .34-.50 Gold 5µ”
MP20W23G10 MS20W23G10 22-20 .34-.50 Gold 10µ”
MP20W23G15 MS20W23G15 22-20 .34-.50 Gold 15µ”
MP20W23G30 MS20W23G30 22-20 .34-.50 Gold 30µ”
MP24W23F MS24W23F 26-24 .13-.25 Gold Flash
MP24W23G5 MS24W23G5 26-24 .13-.25 Gold 5µ”
MP24W23G10 MS24W23G10 26-24 .13-.25 Gold 10µ”
MP24W23G15 MS24W23G15 26-24 .13-.25 Gold 15µ”
MP24W23G30 MS24W23G30 26-24 .13-.25 Gold 30µ”
MP28W23F MS28W23F 30-28 .05-.08 Gold Flash
MP28W23G5 MS28W23G5 30-28 .05-.08 Gold 5µ”
MP28W23G10 MS28W23G10 30-28 .05-.08 Gold 10µ”
MP28W23G15 MS28W23G15 30-28 .05-.08 Gold 15µ”
MP28W23G30 MS28W23G30 30-28 .05-.08 Gold 30µ”
Tools
Contact Extraction Tool,
#20 (Ø 1.0) Contact
QXRT20
Hand Crimp Tool for
Machined Contacts
MFX-3959
Pneumatic Crimp Tool for
Machined Contact
MFX-3960
Machined Contacts
132
Connector Solutions
19 POSITIONS
5A & 7.5A /
150V
Shell Size: 14 Number of Contacts: 19 Contact Size: 20
Sealing: IP67 Salt Spray: 48h
Contacts (con’t)
SP20W1F SS20W1F 22-20 .34-.50 Gold Flash
SP20W1G5 SS20W1G5 22-20 .34-.50 Gold 5µ”
SP20W1G10 SS20W1G10 22-20 .34-.50 Gold 10µ”
SP20W1G15 SS20W1G15 22-20 .34-.50 Gold 15µ”
SP20W1G30 SS20W1G30 22-20 .34-.50 Gold 30µ”
SP24W1F SS24W1F 26-24 .14-.25 Gold Flash
SP24W1G5 SS24W1G5 26-24 .14-.25 Gold 5µ”
SP24W1G10 SS24W1G10 26-24 .14-.25 Gold 10µ”
SP24W1G15 SS24W1G15 26-24 .14-.25 Gold 15µ”
SP24W1G30 SS24W1G30 26-24 .14-.25 Gold 30µ”
SP28W1F SS28W1F 30-28 .05-.08 Gold Flash
SP28W1G5 SS28W1G5 30-28 .05-.08 Gold 5µ”
SP28W1G10 SS28W1G10 30-28 .05-.08 Gold 10µ”
SP28W1G15 SS28W1G15 30-28 .05-.08 Gold 15µ”
SP28W1G30 SS28W1G30 30-28 .05-.08 Gold 30µ”
Crimp Contacts, Stamped & Formed (5A Max)
Part Number AWG Wire
Range
(mm²)
Plating
Male Female
Stamped & Formed Contacts
Tools
Contact Extraction Tool,
#20 (Ø 1.0) Contact
QXRT20
Hand Tool, Stamped &
Formed Contact, Size 20,
20-28AWG
MFX-3958
Crimp Die for Stamped &
Formed Contact
MFX-3957
133
Backshell
Jam Nut Receptacles
Plug
Square Flange
Receptacles
STEP 1
Choose Receptacle Style
OR
STEP 2
Choose Plug Style
S
TEP 2
Choose Backshell Style
Plug Kit Including Connector,
Backshell & Contacts
CONTACTS SOLD SEPARATELY SEE PAGE 140
SEE TABLE ON NEXT PAGE FOR PART DETAILS
Square Flange
Receptacle Kit Including
Receptacle,Gasket
& Contacts
Jam Nut Receptacle Kit
Including Receptacle
& Contacts
RT0S16CGNS1
RT0S16CGNS2
RT0L16CGNS1
RT0L16CGNS2
RT0B16CGNS1
RT0B16CGNS2
RT071619PNH
RT071619SNH
RT071619PNHEC
RT071619SNHEC
RT061619PNH
RT061619SNH
RT061619PNHEC
RT061619SNHEC
RT001619PNH
RT001619SNH
RT001619PNHEC
RT001619SNHEC
OR
134
Connector Solutions
19 POSITIONS
13A / 300V
Insert Arrangement
Pin (Male) Faceview
Connector Part Numbers
Part Number Connector Type Figure Drawings
Male Female Male Female
RT071619PNH RT071619SNH Jam Nut Receptacle 1,5 2,5
RT071619PNHEC RT071619SNHEC Jam Nut Receptacle with O-ring Seal
and End Cap with
Individual Rear Wire Seal** 3,5 4,5
RT071619PNHK RT071619SNHK Jam Nut Receptacle Kit 1,5 2,5
RT061619PNH RT061619SNH Plug 6 7
RT061619PNHEC RT061619SNHEC Plug with O-ring Seal and End Cap
with Individual Rear Wire Seal** 8 9
RT061619PNHK RT061619SNHK Plug Kit 6 7
RT001619PNH RT001619SNH Square Flange Receptacle 10,14 11,14
RT001619PNHEC RT001619SNHEC Square Flange Receptacle with O-ring
Seal and End Cap with
Individual Rear Wire Seal** 12,14 13,14
RT001619PNHK RT001619SNHK Square Flange Receptacle Kit 10,14 11,14
Contacts supplied separately see page 140
**See page 137 for the real seal wire range
Backshells
Part Number Backshell Type Cable Range (mm) Figure Drawings Shielding
RT0S16CGNS1 Short Cord Grip (straight) 9.0-14.5 15
RT0S16CGNS2 Short Cord Grip (straight) 13.5-17 15
RT0L16CGNS1 Long Cord Grip (straight) 9.0-14.5 16
RT0L16CGNS2 Long Cord Grip (straight) 13.5-17 16
RT0B16CGNS1 Cord Grip (90°) 9.5-14.5 17
RT0B16CGNS2 Cord Grip (90°) 13.5-17.0 17
Shell Size: 16 Number of Contacts: 19 Contact Size: 16
Sealing: IP67 Salt Spray: 48h
*Connector parts with part numbers ending in EC (with an end cap) were not available for submittal at the time of UL certication.
An upgraded silicone seal is available for all connector parts.
Please add “03” to the end of the part number when ordering.
Operating Temperature: -40°C to +125°C. Not available in kits.
eco|mate® rm
Standard Products
• Suitable For Indoor and Outdoor Applications
• EMI/RMI Shielding Capability with Appropriate Backshell
• Operating Temperature: -40°C to +105°C
• 500 Mating Cycles
• Contacts and Cord Grips Ordered Separately
• UL ECBT2 Certied*
135
Dimensions Jam Nut Receptacle
Shell Size: 16 Number of Contacts: 19 Contact Size: 16
Sealing: IP67 Salt Spray: 48h
Jam Nut Receptacle Panel Cutout
Figure 5
Jam Nut Receptacle
Figure 1 Male RT071619PNH
Jam Nut Receptacle
Figure 2 Female RT071619SNH
Jam Nut Receptacle with O-ring Seal and
End Cap with Individual Rear Wire Seal
Figure 3 Female RT071619PNHEC
Jam Nut Receptacle with O-ring Seal and
End Cap with Individual Rear Wire Seal
Figure 4 Female RT071619SNHEC
136
Connector Solutions
Dimensions Plug
Shell Size: 16 Number of Contacts: 19 Contact Size: 16
Sealing: IP67 Salt Spray: 48h
19 POSITIONS
13A / 300V
Plug
Figure 6 Male RT061619PNH
Plug
Figure 7 Female RT061619SNH
Plug with O-ring Seal and End Cap with
Individual Rear Wire Seal
Figure 8 Male RT061619PNHEC
Plug with O-ring Seal and End Cap with
Individual Rear Wire Seal
Figure 9 Female RT061619SNHEC
Individual Sealing Wire Range
Contact Size Insulation Overall Diameter (min-max) Wire Range
16 Ø2.0mm - Ø3.2mm 14 - 24 AWG
137
Dimensions Square Flange Receptacle
Shell Size: 16 Number of Contacts: 19 Contact Size: 16
Sealing: IP67 Salt Spray: 48h
Square Flange Receptacle Panel Cutout
Figure 14
Square Flange Receptacle
Figure 10 Male RT001619PNH
Square Flange Receptacle
Figure 11 Female RT001619SNH
Square Flange Receptacle with O-ring Seal
and End Cap with Individual Rear Wire Seal
Figure 12 Male RT001619PNHEC
Square Flange Receptacle with O-ring Seal
and End Cap with Individual Rear Wire Seal
Figure 13 Female RT001619SNHEC
138
Connector Solutions
Dimensions Backshell
Shell Size: 16 Number of Contacts: 19 Contact Size: 16
Sealing: IP67 Salt Spray: 48h
19 POSITIONS
13A / 300V
Locking Clip with Lanyard
108039116
Plug Dustcap with Chain
RT616DCG
Plug Dustcap without Chain
RT616DC
Receptacle Dustcap with Chain
RT016DCG
Receptacle Dustcap with Nylon
Cord, Made of Rubber
RT016RL
Receptacle Dustcap
without Chain
RT016DC
Receptacle Dustcap without
Nylon Cord, Rubber Material
RB00011916
Sealing Plug
CA401659
Square Flange Receptacle
Gaskets, Thickness 0.8mm (±0.2)
RTFD16B
Accessories
Short Cord Grip (straight)
Figure 15
Long Cord Grip (straight)
Figure 16
Cord Grip (90°)
Figure 17
NEW!
See
Page
16
139
Shell Size: 16 Number of Contacts: 19 Contact Size: 16
Sealing: IP67 Salt Spray: 48h
Contacts
Crimp Contacts, Machined
Part Number AWG Wire
Range
(mm²)
Plating
Male Female
MP14M23F MS14M23F 14 2.0-2.5 Gold Flash
MP14M23G5 MS14M23G5 14 2.0-2.5 Gold 5µ”
MP14M23G10 MS14M23G10 14 2.0-2.5 Gold 10µ”
MP14M23G15 MS14M23G15 14 2.0-2.5 Gold 15µ”
MP14M23G30 MS14M23G30 14 2.0-2.5 Gold 30µ”
MP16M23F MS16M23F 18-16 .75-1.5 Gold Flash
MP16M23G5 MS16M23G5 18-16 .75-1.5 Gold 5µ”
MP16M23G10 MS16M23G10 18-16 .75-1.5 Gold 10µ”
MP16M23G15 MS16M23G15 18-16 .75-1.5 Gold 15µ”
MP16M23G30 MS16M23G30 18-16 .75-1.5 Gold 30µ”
MP20M23F MS20M23F 22-20 .34-.50 Gold Flash
MP20M23G5 MS20M23G5 22-20 .34-.50 Gold 5µ”
MP20M23G10 MS20M23G10 22-20 .34-.50 Gold 10µ”
MP20M23G15 MS20M23G15 22-20 .34-.50 Gold 15µ”
MP20M23G30 MS20M23G30 22-20 .34-.50 Gold 30µ”
MP24M23F MS24M23F 26-24 .14-.25 Gold Flash
MP24M23G5 MS24M23G5 26-24 .14-.25 Gold 5µ”
MP24M23G10 MS24M23G10 26-24 .14-.25 Gold 10µ”
MP24M23G15 MS24M23G15 26-24 .14-.25 Gold 15µ”
MP24M23G30 MS24M23G30 26-24 .14-.25 Gold 30µ”
Machined Contacts
Tools
Contact Extraction Tool,
#16 (Ø 1.6) Contact
QXRT16
Hand Crimp Tool for
Machined Contacts
MFX-3959
Pneumatic Crimp Tool for
Machined Contacts
MFX-3960
140
Connector Solutions
Shell Size: 16 Number of Contacts: 19 Contact Size: 16
Sealing: IP67 Salt Spray: 48h
Contacts (con’t)
SP14M1F SS14M1F 14 2.0-2.5 Gold Flash
SP14M1G5 SS14M1G5 14 2.0-2.5 Gold 5µ”
SP14M1G10 SS14M1G10 14 2.0-2.5 Gold 10µ”
SP14M1G15 SS14M1G15 14 2.0-2.5 Gold 15µ”
SP14M1G30 SS14M1G30 14 2.0-2.5 Gold 30µ”
SP16M1F SS16M1F 18-16 .75-1.5 Gold Flash
SP16M1G5 SS16M1G5 18-16 .75-1.5 Gold 5µ”
SP16M1G10 SS16M1G10 18-16 .75-1.5 Gold 10µ”
SP16M1G15 SS16M1G15 18-16 .75-1.5 Gold 15µ”
SP16M1G30 SS16M1G30 18-16 .75-1.5 Gold 30µ”
SP20M1F SS20M1F 22-20 .34-.50 Gold Flash
SP20M1G5 SS20M1G5 22-20 .34-.50 Gold 5µ”
SP20M1G10 SS20M1G10 22-20 .34-.50 Gold 10µ”
SP20M1G15 SS20M1G15 22-20 .34-.50 Gold 15µ”
SP20M1G30 SS20M1G30 22-20 .34-.50 Gold 30µ”
SP24M1F SS24M1F 22-20 .14-.25 Gold Flash
SP24M1G5 SS24M1G5 26-24 .14-.25 Gold 5µ”
SP24M1G10 SS24M1G10 26-24 .14-.25 Gold 10µ”
SP24M1G15 SS24M1G15 26-24 .14-.25 Gold 15µ”
SP24M1G30 SS24M1G30 26-24 .14-.25 Gold 30µ”
Crimp Contacts, Stamped & Formed
Part Number AWG Wire
Range
(mm²)
Plating
Male Female
Stamped & Formed Contacts
19 POSITIONS
13A / 300V
Tools
Contact Extraction Tool,
#16 (Ø 1.6) Contact
QXRT16
Hand Tool, Stamped & Formed
Contact, Size 16, 20-14AWG
MFX-3954
Crimp Die for Stamped &
Formed Contact
MFX-3957
141
Backshell
Jam Nut Receptacles
Plug
Square Flange
Receptacles
STEP 1
Choose Receptacle Style
OR
STEP 2
Choose Plug Style
S
TEP 2
Choose Backshell Style
Plug Kit Including Connector,
Backshell & Contacts
CONTACTS SOLD SEPARATELY SEE PAGE 148
SEE TABLE ON NEXT PAGE FOR PART DETAILS
Square Flange
Receptacle Kit Including
Receptacle,Gasket
& Contacts
Jam Nut Receptacle Kit
Including Receptacle
& Contacts
RT0S18CGNS1
RT0S18CGNS2
RT0L18CGNS1
RT0L18CGNS2
RT071823PNH
RT071823SNH
RT071823PNHEC
RT071823SNHEC
RT061823PNH
RT061823SNH
RT061823PNHEC
RT061823SNHEC
RT001823PNH
RT001823SNH
RT001823PNHEC
RT001823SNHEC
OR
142
Connector Solutions
23 POSITIONS
13A / 300V
Insert Arrangement
Pin (Male) Faceview
Connector Part Numbers
Part Number Connector Type Figure Drawings
Male Female Male Female
RT071823PNH RT071823SNH Jam Nut Receptacle 1,5 2,5
RT071823PNHEC RT071823SNHEC Jam Nut Receptacle with O-ring Seal
and End Cap with
Individual Rear Wire Seal** 3,5 4,5
RT071823PNHK RT071823SNHK Jam Nut Receptacle Kit 1,5 2,5
RT061823PNH RT061823SNH Plug 6 7
RT061823PNHEC RT061823SNHEC Plug with O-ring Seal and End Cap
with Individual Rear Wire Seal** 8 9
RT061823PNHK RT061823SNHK Plug Kit 1,5 2,5
RT001823PNH RT001823SNH Square Flange Receptacle 10,14 11,14
RT001823PNHEC RT001823SNHEC Square Flange Receptacle with O-ring
Seal and End Cap with
Individual Rear Wire Seal** 12,14 13,14
RT001823PNHK RT001823SNHK Square Flange Receptacle Kit 10,14 11,14
Contacts supplied separately see page 148
**See page 145 for the real seal wire range
Backshells
Part Number Backshell Type Cable Range (mm) Figure Drawings Shielding
RT0S18CGNS1 Short Cord Grip (straight) 9.0-14.5 15
RT0S18CGNS2 Short Cord Grip (straight) 13.5-17 15
RT0L18CGNS1 Long Cord Grip (straight) 9.0-14.5 16
RT0L18CGNS2 Long Cord Grip (straight) 13.5-17 16
Shell Size: 18 Number of Contacts: 23 Contact Size: 16
Sealing: IP67 Salt Spray: 48h
*Connector parts with part numbers ending in EC (with an end cap) were not available for submittal at the time of UL certication.
eco|mate® rm
Standard Products
• Suitable For Indoor and Outdoor Applications
• EMI/RMI Shielding Capability with Appropriate Backshell
• Operating Temperature: -40°C to +105°C
• 500 Mating Cycles
• Contacts and Cord Grips Ordered Separately
• UL ECBT2 Certied*
An upgraded silicone seal is available for all connector parts.
Please add “03” to the end of the part number when ordering.
Operating Temperature: -40°C to +125°C. Not available in kits.
143
Dimensions Jam Nut Receptacle
Shell Size: 18 Number of Contacts: 23 Contact Size: 16
Sealing: IP67 Salt Spray: 48h
Jam Nut Receptacle Panel Cutout
Figure 5
Jam Nut Receptacle
Figure 1 Male RT071823PNH
Jam Nut Receptacle
Figure 2 Female RT071823SNH
Jam Nut Receptacle with O-ring Seal and
End Cap with Individual Rear Wire Seal
Figure 3 Male RT071823PNHEC
Jam Nut Receptacle with O-ring Seal and
End Cap with Individual Rear Wire Seal
Figure 4 Female RT071823SNHEC
144
Connector Solutions
Dimensions Plug
Shell Size: 18 Number of Contacts: 23 Contact Size: 16
Sealing: IP67 Salt Spray: 48h
23 POSITIONS
13A / 300V
Plug
Figure 6 Male RT061823PNH
Plug
Figure 7 Female RT061823SNH
Plug with O-ring Seal and End Cap with
Individual Rear Wire Seal
Figure 8 Male RT061823PNHEC
Plug with O-ring Seal and End Cap with
Individual Rear Wire Seal
Figure 9 Female RT061823SNHEC
Individual Sealing Wire Range
Contact Size Insulation Overall Diameter (min-max) Wire Range
16 Ø2.0mm - Ø3.2mm 14 - 24 AWG
145
Dimensions Square Flange Receptacle
Shell Size: 18 Number of Contacts: 23 Contact Size: 16
Sealing: IP67 Salt Spray: 48h
Square Flange Receptacle Panel Cutout
Figure 14
Square Flange Receptacle
Figure 10 Male RT001823PNH
Square Flange Receptacle
Figure 11 Female RT001823SNH
Square Flange Receptacle with O-ring Seal and
End Cap with Individual Rear Wire Seal
Figure 12 Male RT001823PNHEC
Square Flange Receptacle with O-ring Seal
and End Cap with Individual Rear Wire Seal
Figure 13 Female RT001823SNHEC
146
Connector Solutions
Dimensions Backshell
Shell Size: 18 Number of Contacts: 23 Contact Size: 16
Sealing: IP67 Salt Spray: 48h
23 POSITIONS
13A / 300V
Short Cord Grip (straight)
Figure 15
Long Cord Grip (straight)
Figure 16
Locking Clip with Lanyard
108039118
Plug Dustcap with Chain
RT618DCG
Plug Dustcap without Chain
RT618DC
Receptacle Dustcap with Chain
RT018DCG
Receptacle Dustcap with Nylon
Cord, Made of Rubber
RT018RL
Receptacle Dustcap
without Chain
RT018DC
Receptacle Dustcap without
Nylon Cord, Rubber Material
RB00011918
Sealing Plug
CA401659
Square Flange Receptacle
Gaskets, Thickness 0.8mm (±0.2)
RTFD18B
Accessories
NEW!
See
Page
16
147
Shell Size: 18 Number of Contacts: 23 Contact Size: 16
Sealing: IP67 Salt Spray: 48h
Contacts
Crimp Contacts, Machined
Part Number AWG Wire
Range
(mm²)
Plating
Male Female
MP14M23F MS14M23F 14 2.0-2.5 Gold Flash
MP14M23FG5 MS14M23G5 14 2.0-2.5 Gold 5µ”
MP14M23FG10 MS14M23G10 14 2.0-2.5 Gold 10µ”
MP14M23FG15 MS14M23G15 14 2.0-2.5 Gold 15µ”
MP14M23G30 MS14M23G30 14 2.0-2.5 Gold 30µ”
MP16M23F MS16M23F 18-16 .75-1.5 Gold Flash
MP16M23G5 MS16M23G5 18-16 .75-1.5 Gold 5µ”
MP16M23G10 MS16M23G10 18-16 .75-1.5 Gold 10µ”
MP16M23G15 MS16M23G15 18-16 .75-1.5 Gold 15µ”
MP16M23G30 MS16M23G30 18-16 .75-1.5 Gold 30µ”
MP20M23F MS20M23F 22-20 .34-.50 Gold Flash
MP20M23G5 MS20M23G5 22-20 .34-.50 Gold 5µ”
MP20M23G10 MS20M23G10 22-20 .34-.50 Gold 10µ”
MP20M23G15 MS20M23G15 22-20 .34-.50 Gold 15µ”
MP20M23G30 MS20M23G30 22-20 .34-.50 Gold 30µ”
MP24M23F MS24M23F 26-24 .14-.25 Gold Flash
MP24M23G5 MS24M23G5 26-24 .14-.25 Gold 5µ”
MP24M23G10 MS24M23G10 26-24 .14-.25 Gold 10µ”
MP24M23G15 MS24M23G15 26-24 .14-.25 Gold 15µ”
MP24M23G30 MS24M23G30 26-24 .14-.25 Gold 30µ”
Machined Contacts
Tools
Contact Extraction Tool,
#16 (Ø 1.6) Contact
QXRT16
Hand Crimp Tool for
Machined Contacts
MFX-3959
Pneumatic Crimp Tool for
Machined Contacts
MFX-3960
148
Connector Solutions
Shell Size: 18 Number of Contacts: 23 Contact Size: 16
Sealing: IP67 Salt Spray: 48h
Contacts (con’t)
SP14M1F SS14M1F 14 2.0-2.5 Gold Flash
SP14M1G5 SS14M1G5 14 2.0-2.5 Gold 5µ”
SP14M1G10 SS14M1G10 14 2.0-2.5 Gold 10µ”
SP14M1G15 SS14M1G15 14 2.0-2.5 Gold 15µ”
SP14M1G30 SS14M1G30 14 2.0-2.5 Gold 30µ”
SP16M1F SS16M1F 18-16 .75-1.5 Gold Flash
SP16M1G5 SS16M1G5 18-16 .75-1.5 Gold 5µ”
SP16M1G10 SS16M1G10 18-16 .75-1.5 Gold 10µ”
SP16M1G15 SS16M1G15 18-16 .75-1.5 Gold 15µ”
SP16M1G30 SS16M1G30 18-16 .75-1.5 Gold 30µ”
SP20M1F SS20M1F 22-20 .34-.50 Gold Flash
SP20M1G5 SS20M1G5 22-20 .34-.50 Gold 5µ”
SP20M1G10 SS20M1G10 22-20 .34-.50 Gold 10µ”
SP20M1G15 SS20M1G15 22-20 .34-.50 Gold 15µ”
SP20M1G30 SS20M1G30 22-20 .34-.50 Gold 30µ”
SP24M1F SS24M1F 22-20 .14-.25 Gold Flash
SP24M1G5 SS24M1G5 26-24 .14-.25 Gold 5µ”
SP24M1G10 SS24M1G10 26-24 .14-.25 Gold 10µ”
SP24M1G15 SS24M1G15 26-24 .14-.25 Gold 15µ”
SP24M1G30 SS24M1G30 26-24 .14-.25 Gold 30µ”
Crimp Contacts, Stamped & Formed
Part Number AWG Wire
Range
(mm²)
Plating
Male Female
23 POSITIONS
13A / 300V
Stamped & Formed Contacts
Tools
Contact Extraction Tool,
#16 (Ø 1.6) Contact
QXRT16
Crimp Die for Stamped
& Formed Contact
MFX-3957
Hand Tool, Stamped & Formed
Contact, Size 16, 20-14AWG
MFX-3954
149
Backshell
Jam Nut Receptacles
Plug
Square Flange
Receptacles
STEP 1
Choose Receptacle Style
OR
STEP 2
Choose Plug Style
S
TEP 2
Choose Backshell Style
Plug Kit Including Connector,
Backshell & Contacts
CONTACTS SOLD SEPARATELY SEE PAGE 156
SEE TABLE ON NEXT PAGE FOR PART DETAILS
Square Flange
Receptacle Kit Including
Receptacle,Gasket
& Contacts
Jam Nut Receptacle Kit
Including Receptacle
& Contacts
RT0S16CGNS1
RT0S16CGNS2
RT0L16CGNS1
RT0L16CGNS2
RT0B16CGNS1
RT0B16CGNS2
RT0W71626PNH
RT0W71626SNH
RT0W71626PNHEC
RT0W71626SNHEC
RT0W61626PNH
RT0W61626SNH
RT0W61626PNHEC
RT0W61626SNHEC
RT0W01626PNH
RT0W01626SNH
RT0W01626PNHEC
RT0W01626SNHEC
OR
150
Connector Solutions
26 POSITIONS
5A, 7.5A /
150V
Insert Arrangement
Pin (Male) Faceview
Connector Part Numbers
Part Number Connector Type Figure Drawings
Male Female Male Female
RT0W71626PNH RT0W71626SNH Jam Nut Receptacle 1,5 2,5
RT0W71626PNHEC RT0W71626SNHEC Jam Nut Receptacle with O-ring Seal
and End Cap with
Individual Rear Wire Seal** 3,5 4,5
RT0W71626PNHK RT0W71626SNHK Jam Nut Receptacle Kit 1,5 2,5
RT0W61626PNH RT0W61626SNH Plug 6 7
RT0W61626PNHEC RT0W61626SNHEC Plug with O-ring Seal and End Cap
with Individual Rear Wire Seal** 8 9
RT0W61626PNHK RT0W61626SNHK Plug Kit 6 7
RT0W01626PNH RT0W01626SNH Square Flange Receptacle 10,14 11,14
RT0W01626PNHEC RT0W01626SNHEC Square Flange Receptacle with
Unshielded Backshell and End Cap
with Individual Rear Wire Seal** 12,14 13,14
RT0W01626PNHK RT0W01626SNHK Square Flange Receptacle Kit 10,14 11,14
Contacts supplied separately see page 156
**See page 153 for the real seal wire range
Backshells
Part Number Backshell Type Cable Range (mm) Figure Drawings Shielding
RT0S16CGNS1 Short Cord Grip (straight) 9.0-14.5 15
RT0S16CGNS2 Short Cord Grip (straight) 13.5-17 15
RT0L16CGNS1 Long Cord Grip (straight) 9.0-14.5 16
RT0L16CGNS2 Long Cord Grip (straight) 13.5-17 16
RT0B16CGNS1 Cord Grip (90°) 9.5-14.5 17
RT0B16CGNS2 Cord Grip (90°) 13.5-17.0 17
Shell Size: 16 Number of Contacts: 26 Contact Size: 20
Sealing: IP67 Salt Spray: 48h
*Connector parts with part numbers ending in EC (with an end cap) were not available for submittal at the time of UL certication.
An upgraded silicone seal is available for all connector parts.
Please add “03” to the end of the part number when ordering.
Operating Temperature: -40°C to +125°C. Not available in kits.
eco|mate® rm
Standard Products
• Suitable For Indoor and Outdoor Applications
• EMI/RMI Shielding Capability with Appropriate Backshell
• Operating Temperature: -40°C to +105°C
• 500 Mating Cycles
• Contacts and Cord Grips Ordered Separately
• UL ECBT2 Certied*
151
Dimensions Jam Nut Receptacle
Shell Size: 16 Number of Contacts: 26 Contact Size: 20
Sealing: IP67 Salt Spray: 48h
Jam Nut Receptacle Panel Cutout
Figure 5
Jam Nut Receptacle
Figure 1 Male RT0W71626PNH
Jam Nut Receptacle
Figure 2 Female RT0W71626SNH
Jam Nut Receptacle with O-ring Seal and
End Cap with Individual Rear Wire Seal
Figure 3 Male RT0W71626PNHEC
Jam Nut Receptacle with O-ring Seal and
End Cap with Individual Rear Wire Seal
Figure 4 Female RT0W71626SNHEC
152
Connector Solutions
Dimensions Plug
Shell Size: 16 Number of Contacts: 26 Contact Size: 20
Sealing: IP67 Salt Spray: 48h
Plug
Figure 6 Male RT0W61626PNH
Plug
Figure 7 Female RT0W61626SNH
Plug with O-ring Seal and End Cap with
Individual Rear Wire Seal
Figure 8 Male RT0W61626PNHEC
Plug with O-ring Seal and End Cap with
Individual Rear Wire Seal
Figure 9 Female RT0W61626SNHEC
26 POSITIONS
5A, 7.5A /
150V
Individual Sealing Wire Range
Contact Size Insulation Overall Diameter (min-max) Wire Range
20 Ø1.6mm - Ø2.6mm 20 - 30 AWG
153
Dimensions Square Flange Receptacle
Shell Size: 16 Number of Contacts: 26 Contact Size: 20
Sealing: IP67 Salt Spray: 48h
Square Flange Receptacle Panel Cutout
Figure 14
Square Flange Receptacle
Figure 10 Male RT0W01626PNH
Square Flange Receptacle
Figure 11 Female RT0W01626SNH
Square Flange Receptacle with O-ring Seal and
End Cap with Individual Rear Wire Seal
Figure 12 Male RT0W01626PNHEC
Square Flange Receptacle with O-ring Seal and
End Cap with Individual Rear Wire Seal
Figure 13 Female RT0W01626SNHEC
154
Connector Solutions
Dimensions Backshell
Shell Size: 16 Number of Contacts: 26 Contact Size: 20
Sealing: IP67 Salt Spray: 48h
26 POSITIONS
5A, 7.5A /
150V
Locking Clip with Lanyard
108039116
Plug Dustcap with Chain
RT616DCG
Plug Dustcap without Chain
RT616DC
Receptacle Dustcap with Chain
RT016DCG
Receptacle Dustcap with Nylon
Cord, Made of Rubber
RT016RL
Receptacle Dustcap
without Chain
RT016DC
Receptacle Dustcap without
Nylon Cord, Rubber Material
RB00011916
Sealing Plug
CA402059
Square Flange Receptacle
Gaskets, Thickness 0.8mm (±0.2)
RTFD16B
Accessories
Short Cord Grip (straight)
Figure 15
Long Cord Grip (straight)
Figure 17
Cord Grip (90°)
Figure 19
NEW!
See
Page
16
155
Shell Size: 16 Number of Contacts: 26 Contact Size: 20
Sealing: IP67 Salt Spray: 48h
Contacts
Crimp Contacts, Machined (7.5A Max)
Part Number AWG Wire
Range
(mm²)
Plating
Male Female
MP20W23F MS20W23F 22-20 .34-.50 Gold Flash
MP20W23G5 MS20W23G5 22-20 .34-.50 Gold 5µ”
MP20W23G10 MS20W23G10 22-20 .34-.50 Gold 10µ”
MP20W23G15 MS20W23G15 22-20 .34-.50 Gold 15µ”
MP20W23G30 MS20W23G30 22-20 .34-.50 Gold 30µ”
MP24W23F MS24W23F 26-24 .13-.25 Gold Flash
MP24W23G5 MS24W23G5 26-24 .13-.25 Gold 5µ”
MP24W23G10 MS24W23G10 26-24 .13-.25 Gold 10µ”
MP24W23G15 MS24W23G15 26-24 .13-.25 Gold 15µ”
MP24W23G30 MS24W23G30 26-24 .13-.25 Gold 30µ”
MP28W23F MS28W23F 30-28 .05-.08 Gold Flash
MP28W23G5 MS28W23G5 30-28 .05-.08 Gold 5µ”
MP28W23G10 MS28W23G10 30-28 .05-.08 Gold 10µ”
MP28W23G15 MS28W23G15 30-28 .05-.08 Gold 15µ”
MP28W23G30 MS28W23G30 30-28 .05-.08 Gold 30µ”
Tools
Contact Extraction Tool,
#20 (Ø 1.0) Contact
QXRT20
Hand Crimp Tool for
Machined Contacts
MFX-3959
Pneumatic Crimp Tool for
Machined Contact
MFX-3960
Machined Contacts
156
Connector Solutions
26 POSITIONS
5A, 7.5A /
150V
Shell Size: 16 Number of Contacts: 26 Contact Size: 20
Sealing: IP67 Salt Spray: 48h
Contacts (con’t)
SP20W1F SS20W1F 22-20 .34-.50 Gold Flash
SP20W1G5 SS20W1G5 22-20 .34-.50 Gold 5µ”
SP20W1G10 SS20W1G10 22-20 .34-.50 Gold 10µ”
SP20W1G15 SS20W1G15 22-20 .34-.50 Gold 15µ”
SP20W1G30 SS20W1G30 22-20 .34-.50 Gold 30µ”
SP24W1F SS24W1F 26-24 .14-.25 Gold Flash
SP24W1G5 SS24W1G5 26-24 .14-.25 Gold 5µ”
SP24W1G10 SS24W1G10 26-24 .14-.25 Gold 10µ”
SP24W1G15 SS24W1G15 26-24 .14-.25 Gold 15µ”
SP24W1G30 SS24W1G30 26-24 .14-.25 Gold 30µ”
SP28W1F SS28W1F 30-28 .05-.08 Gold Flash
SP28W1G5 SS28W1G5 30-28 .05-.08 Gold 5µ”
SP28W1G10 SS28W1G10 30-28 .05-.08 Gold 10µ”
SP28W1G15 SS28W1G15 30-28 .05-.08 Gold 15µ”
SP28W1G30 SS28W1G30 30-28 .05-.08 Gold 30µ”
Crimp Contacts, Stamped & Formed (5A Max)
Part Number AWG Wire
Range
(mm²)
Plating
Male Female
Stamped & Formed Contacts
Tools
Contact Extraction Tool,
#20 (Ø 1.0) Contact
QXRT20
Hand Tool, Stamped &
Formed Contact, Size 20,
20-28AWG
MFX-3958
Crimp Die for Stamped &
Formed Contact
MFX-3957
157
Backshell
Jam Nut Receptacles
Plug
Square Flange
Receptacles
STEP 1
Choose Receptacle Style
OR
STEP 2
Choose Plug Style
S
TEP 2
Choose Backshell Style
Plug Kit Including Connector,
Backshell & Contacts
OR
CONTACTS SOLD SEPARATELY SEE PAGE 164
SEE TABLE ON NEXT PAGE FOR PART DETAILS
Square Flange
Receptacle Kit Including
Receptacle,Gasket
& Contacts
Jam Nut Receptacle Kit
Including Receptacle
& Contacts
RT0L20CPGS5
RT0L20CPGS6
RT072028PNH
RT072028SNH
RT072028PNHEC
RT072028SNHEC
RT062028PNH
RT062028SNH
RT062028PNHEC
RT062028SNHEC
RT002028PNH
RT002028SNH
RT002028PNHEC
RT002028SNHEC
158
Connector Solutions
28 POSITIONS
13A / 300V
Insert Arrangement
Pin (Male) Faceview
Connector Part Numbers
Part Number Connector Type Figure Drawings
Male Female Male Female
RT072028PNH RT072028SNH Jam Nut Receptacle 1,5 2,5
RT072028PNHEC RT072028SNHEC Jam Nut Receptacle with O-ring Seal
and End Cap with
Individual Rear Wire Seal** 3,5 4,5
RT072028PNHK RT072028SNHK Jam Nut Receptacle Kit 1,5 2,5
RT062028PNH RT062028SNH Plug 6 7
RT062028PNHEC RT062028SNHEC Plug with O-ring Seal and End Cap
with Individual Rear Wire Seal** 8 9
RT062028PNHK RT062028SNHK Plug Kit 6 7
RT002028PNH RT002028SNH Square Flange Receptacle 10,14 11,14
RT002028PNHEC RT002028SNHEC Square Flange Receptacle with O-ring
Seal and End Cap with
Individual Rear Wire Seal** 12,14 13,14
RT002028PNHK RT002028SNHK Square Flange Receptacle Kit 10,14 11,14
Contacts supplied separately see page 164
**See page 153 for the real seal wire range
Backshells
Part Number Backshell Type Cable Range (mm) Figure Drawings Shielding
RT0L20CPGS5 Long Cord Grip (straight) 12.5-13.3 15
RT0L20CPGS6 Long Cord Grip (straight) 15.5-19.5 15
Shell Size: 20 Number of Contacts: 28 Contact Size: 16
Sealing: IP67 Salt Spray: 48h
*Connector parts with part numbers ending in EC (with an end cap) were not available for submittal at the time of UL certication.
An upgraded silicone seal is available for all connector parts.
Please add “03” to the end of the part number when ordering.
Operating Temperature: -40°C to +125°C. Not available in kits.
eco|mate® rm
Standard Products
• Suitable For Indoor and Outdoor Applications
• EMI/RMI Shielding Capability with Appropriate Backshell
• Operating Temperature: -40°C to +105°C
• 500 Mating Cycles
• Contacts and Cord Grips Ordered Separately
• UL ECBT2 Certied*
159
Dimensions Jam Nut Receptacle
Shell Size: 20 Number of Contacts: 28 Contact Size: 16
Sealing: IP67 Salt Spray: 48h
Jam Nut Receptacle Panel Cutout
Figure 5
Jam Nut Receptacle
Figure 1 Male RT072028PNH
Jam Nut Receptacle
Figure 2 Female RT072028SNH
Jam Nut Receptacle with O-ring Seal and
End Cap with Individual Rear Wire Seal
Figure 3 Male RT072028PNHEC
Jam Nut Receptacle with O-ring Seal and
End Cap with Individual Rear Wire Seal
Figure 4 Female RT072028SNHEC
160
Connector Solutions
Dimensions Plug
Shell Size: 20 Number of Contacts: 28 Contact Size: 16
Sealing: IP67 Salt Spray: 48h
28 POSITIONS
13A / 300V
Plug
Figure 6 Male RT062028PNH
Plug
Figure 7 Female RT062028SNH
Plug with O-ring Seal and End Cap with
Individual Rear Wire Seal
Figure 8 Male RT062028PNHEC
Plug with O-ring Seal and End Cap with
Individual Rear Wire Seal
Figure 9 Female RT062028SNHEC
Individual Sealing Wire Range
Contact Size Insulation Overall Diameter (min-max) Wire Range
16 Ø2.0mm - Ø3.2mm 14 - 24 AWG
161
Dimensions Square Flange Receptacle
Shell Size: 20 Number of Contacts: 28 Contact Size: 16
Sealing: IP67 Salt Spray: 48h
Square Flange Receptacle Panel Cutout
Figure 14
Square Flange Receptacle
Figure 10 Male RT002028PNH
Square Flange Receptacle
Figure 11 Female RT002028SNH
Square Flange Receptacle with O-ring Seal and
End Cap with Individual Rear Wire Seal
Figure 12 Male RT002028PNHEC
Square Flange Receptacle with O-ring Seal
and End Cap with Individual Rear Wire Seal
Figure 13 Female RT002028SNHEC
162
Connector Solutions
Dimensions Backshell
Shell Size: 20 Number of Contacts: 28 Contact Size: 16
Sealing: IP67 Salt Spray: 48h
28 POSITIONS
13A / 300V
Long Cord Grip (straight)
Figure 15
Accessories
Locking Clip with Lanyard
108039120
Plug Dustcap with Chain
RT620DCG
Plug Dustcap without Chain
RT620DC
Receptacle Dustcap with Chain
RT020DCG
Receptacle Dustcap
with Nylon Cord
RT020RL
Receptacle Dustcap
without Chain
RT020DC
Receptacle Dustcap without
Nylon Cord, Rubber Material
RB00011920
Sealing Plug
CA401659
Square Flange Receptacle
Gaskets, Thickness 0.8mm (±0.2)
RTFD20B
NEW!
See
Page
16
163
Shell Size: 20 Number of Contacts: 28 Contact Size: 16
Sealing: IP67 Salt Spray: 48h
Contacts
Crimp Contacts, Machined
Part Number AWG Wire
Range Plating
Male Female
MP14M23F MS14M23F 14 2.0-2.5 Gold Flash
MP14M23G5 MS14M23G5 14 2.0-2.5 Gold 5µ”
MP14M23G10 MS14M23G10 14 2.0-2.5 Gold 10µ”
MP14M23G15 MS14M23G15 14 2.0-2.5 Gold 15µ”
MP14M23G30 MS14M23G30 14 2.0-2.5 Gold 30µ”
MP16M23F MS16M23F 18-16 .75-1.5 Gold Flash
MP16M23G5 MS16M23G5 18-16 .75-1.5 Gold 5µ”
MP16M23G10 MS16M23G10 18-16 .75-1.5 Gold 10µ”
MP16M23G15 MS16M23G15 18-16 .75-1.5 Gold 15µ”
MP16M23G30 MS16M23G30 18-16 .75-1.5 Gold 30µ”
MP20M23F MS20M23F 22-20 .34-.50 Gold Flash
MP20M23G5 MS20M23G5 22-20 .34-.50 Gold 5µ”
MP20M23G10 MS20M23G10 22-20 .34-.50 Gold 10µ”
MP20M23G15 MS20M23G15 22-20 .34-.50 Gold 15µ”
MP20M23G30 MS20M23G30 22-20 .34-.50 Gold 30µ”
MP24M23F MS24M23F 26-24 .14-.25 Gold Flash
MP24M23G5 MS24M23G5 26-24 .14-.25 Gold 5µ”
MP24M23G10 MS24M23G10 26-24 .14-.25 Gold 10µ”
MP24M23G15 MS24M23G15 26-24 .14-.25 Gold 15µ”
MP24M23G30 MS24M23G30 26-24 .14-.25 Gold 30µ”
Machined Contacts
Tools
Hand Crimp Tool for
Machined Contacts
MFX-3959
Pneumatic Crimp Tool for
Machined Contacts
MFX-3960
Contact Extraction Tool,
#16 (Ø 1.6) Contact
QXRT16
164
Connector Solutions
Shell Size: 20 Number of Contacts: 28 Contact Size: 16
Sealing: IP67 Salt Spray: 48h
Contacts (con’t)
SP14M1F SS14M1F 14 2.0-2.5 Gold Flash
SP14M1G5 SS14M1G5 14 2.0-2.5 Gold 5µ”
SP14M1G10 SS14M1G10 14 2.0-2.5 Gold 10µ”
SP14M1G15 SS14M1G15 14 2.0-2.5 Gold 15µ”
SP14M1G30 SS14M1G30 14 2.0-2.5 Gold 30µ”
SP16M1F SS16M1F 18-16 .75-1.5 Gold Flash
SP16M1G5 SS16M1G5 18-16 .75-1.5 Gold 5µ”
SP16M1G10 SS16M1G10 18-16 .75-1.5 Gold 10µ”
SP16M1G15 SS16M1G15 18-16 .75-1.5 Gold 15µ”
SP16M1G30 SS16M1G30 18-16 .75-1.5 Gold 30µ”
SP20M1F SS20M1F 22-20 .34-.50 Gold Flash
SP20M1G5 SS20M1G5 22-20 .34-.50 Gold 5µ”
SP20M1G10 SS20M1G10 22-20 .34-.50 Gold 10µ”
SP20M1G15 SS20M1G15 22-20 .34-.50 Gold 15µ”
SP20M1G30 SS20M1G30 22-20 .34-.50 Gold 30µ”
SP24M1F SS24M1F 22-20 .14-.25 Gold Flash
SP24M1G5 SS24M1G5 26-24 .14-.25 Gold 5µ”
SP24M1G10 SS24M1G10 26-24 .14-.25 Gold 10µ”
SP24M1G15 SS24M1G15 26-24 .14-.25 Gold 15µ”
SP24M1G30 SS24M1G30 26-24 .14-.25 Gold 30µ”
Crimp Contacts, Stamped & Formed
Part Number AWG Wire
Range
(mm²)
Plating
Male Female
28 POSITIONS
13A / 300V
Stamped & Formed Contacts
Tools
Contact Extraction Tool,
#16 (Ø 1.6) Contact
QXRT16
Hand Tool, Stamped & Formed
Contact, Size 16, 20-14AWG
MFX-3954
Crimp Die for Stamped
& Formed Contact
MFX-3957
165
Backshell
Jam Nut Receptacles
Plug
Square Flange
Receptacles
STEP 1
Choose Receptacle Style
OR
STEP 2
Choose Plug Style
S
TEP 2
Choose Backshell Style
Plug Kit Including Connector,
Backshell & Contacts
OR
CONTACTS SOLD SEPARATELY SEE PAGE 172
SEE TABLE ON NEXT PAGE FOR PART DETAILS
Square Flange
Receptacle Kit Including
Receptacle,Gasket
& Contacts
Jam Nut Receptacle Kit
Including Receptacle
& Contacts
RT0S18CGNS1
RT0S18CGNS2
RT0L18CGNS1
RT0L18CGNS2
RT0W71832PNH
RT0W71832SNH
RT0W71832PNHEC
RT0W71832SNHEC
RT0W61832PNH
RT0W61832SNH
RT0W61832PNHEC
RT0W61832SNHEC
RT0W01832PNH
RT0W01832SNH
RT0W01832PNHEC
RT0W01832SNHEC
166
Connector Solutions
32 POSITIONS
5A, 7.5A /
150V
Insert Arrangement
Pin (Male) Faceview
Connector Part Numbers
Part Number Connector Type Figure Drawings
Male Female Male Female
RT0W71832PNH RT0W71832SNH Jam Nut Receptacle 1,5 2,5
RT0W71832PNHEC RT0W71832SNHEC Jam Nut Receptacle with O-ring Seal
and End Cap with
Individual Rear Wire Seal** 3,5 4,5
RT0W71832PNHK RT0W71832SNHK Jam Nut Receptacle Kit 1,5 2,5
RT0W61832PNH RT0W61832SNH Plug 6 7
RT0W61832PNHEC RT0W61832SNHEC Plug with O-ring Seal and End Cap
with Individual Rear Wire Seal** 8 9
RT0W61832PNHK RT0W61832SNHK Plug Kit 6 7
RT0W01832PNH RT0W01832SNH Square Flange Receptacle 10,14 11,14
RT0W01832PNHEC RT0W01832SNHEC Square Flange Receptacle with O-ring
Seal and End Cap with
Individual Rear Wire Seal** 12,14 13,14
RT0W01832PNHK RT0W01832SNHK Square Flange Receptacle Kit 10,14 11,14
Contacts supplied separately see page 172
**See page 169 for the real seal wire range
Backshells
Part Number Backshell Type Cable Range (mm) Figure Drawings Shielding
RT0S18CGNS1 Short Cord Grip (straight) 9.0-14.5 15
RT0S18CGNS2 Short Cord Grip (straight) 13.5-17 15
RT0L18CGNS1 Long Cord Grip (straight) 9.0-14.5 16
RT0L18CGNS2 Long Cord Grip (straight) 13.5-17 16
Shell Size: 18 Number of Contacts: 32 Contact Size: 20
Sealing: IP67 Salt Spray: 48h
*Connector parts with part numbers ending in EC (with an end cap) were not available for submittal at the time of UL certication.
An upgraded silicone seal is available for all connector parts.
Please add “03” to the end of the part number when ordering.
Operating Temperature: -40°C to +125°C. Not available in kits.
eco|mate® rm
Standard Products
• Suitable For Indoor and Outdoor Applications
• EMI/RMI Shielding Capability with Appropriate Backshell
• Operating Temperature: -40°C to +105°C
• 500 Mating Cycles
• Contacts and Cord Grips Ordered Separately
• UL ECBT2 Certied*
167
Dimensions Jam Nut Receptacle
Shell Size: 18 Number of Contacts: 32 Contact Size: 20
Sealing: IP67 Salt Spray: 48h
Jam Nut Receptacle Panel Cutout
Figure 5
Jam Nut Receptacle
Figure 1 Male RT0W71832PNH
Jam Nut Receptacle
Figure 2 Female RT0W71832SNH
Jam Nut Receptacle with O-ring Seal and
End Cap with Individual Rear Wire Seal
Figure 3 Male RT0W71832PNHEC
Jam Nut Receptacle with O-ring Seal and
End Cap with Individual Rear Wire Seal
Figure 4 Female RT0W71832SNHEC
168
Connector Solutions
Dimensions Plug
Shell Size: 18 Number of Contacts: 32 Contact Size: 20
Sealing: IP67 Salt Spray: 48h
Plug
Figure 6 Male RT0W61832PNH
Plug
Figure 7 Female RT0W61832SNH
Plug with O-ring Seal and End Cap with
Individual Rear Wire Seal
Figure 8 Male RT0W61832PNHEC
Plug with O-ring Seal and End Cap with
Individual Rear Wire Seal
Figure 9 Female RT0W61832SNHEC
32 POSITIONS
5A, 7.5A /
150V
Individual Sealing Wire Range
Contact Size Insulation Overall Diameter (min-max) Wire Range
20 Ø1.6mm - Ø2.6mm 20 - 30 AWG
169
Dimensions Square Flange Receptacle
Shell Size: 18 Number of Contacts: 32 Contact Size: 20
Sealing: IP67 Salt Spray: 48h
Square Flange Receptacle Panel Cutout
Figure 14
Square Flange Receptacle
Figure 10 Male RT0W01832PNH
Square Flange Receptacle
Figure 11 Female RT0W01832SNH
Square Flange Receptacle with O-ring Seal and
End Cap with Individual Rear Wire Seal
Figure 12 Male RT0W01832PNHEC
Square Flange Receptacle with O-ring Seal
and End Cap with Individual Rear Wire Seal
Figure 13 Female RT0W01832SNHEC
170
Connector Solutions
Dimensions Backshell
Shell Size: 18 Number of Contacts: 32 Contact Size: 20
Sealing: IP67 Salt Spray: 48h
32 POSITIONS
5A, 7.5A /
150V
Short Cord Grip (straight)
Figure 15
Long Cord Grip (straight)
Figure 16
Accessories
Locking Clip with Lanyard
108039118
Plug Dustcap with Chain
RT618DCG
Plug Dustcap without Chain
RT618DC
Receptacle Dustcap with Chain
RT018DCG
Receptacle Dustcap with Nylon
Cord, Made of Rubber
RT018RL
Receptacle Dustcap
without Chain
RT018DC
Receptacle Dustcap without
Nylon Cord, Rubber Material
RB00011918
Sealing Plug
CA401659
Sealing Plug
CA401259
Square Flange Receptacle
Gaskets, Thickness 0.8mm (±0.2)
RTFD18B
NEW!
See
Page
16
171
Shell Size: 18 Number of Contacts: 32 Contact Size: 20
Sealing: IP67 Salt Spray: 48h
Contacts
Crimp Contacts, Machined (7.5A Max)
PART NUMBER AWG Wire
Range
(mm²)
Plating
MALE FEMALE
MP20W23F MS20W23F 22-20 .34-.50 Gold Flash
MP20W23G5 MS20W23G5 22-20 .34-.50 Gold 5µ”
MP20W23G10 MS20W23G10 22-20 .34-.50 Gold 10µ”
MP20W23G15 MS20W23G15 22-20 .34-.50 Gold 15µ”
MP20W23G30 MS20W23G30 22-20 .34-.50 Gold 30µ”
MP24W23F MS24W23F 26-24 .13-.25 Gold Flash
MP24W23G5 MS24W23G5 26-24 .13-.25 Gold 5µ”
MP24W23G10 MS24W23G10 26-24 .13-.25 Gold 10µ”
MP24W23G15 MS24W23G15 26-24 .13-.25 Gold 15µ”
MP24W23G30 MS24W23G30 26-24 .13-.25 Gold 30µ”
MP28W23F MS28W23F 30-28 .05-.08 Gold Flash
MP28W23G5 MS28W23G5 30-28 .05-.08 Gold 5µ”
MP28W23G10 MS28W23G10 30-28 .05-.08 Gold 10µ”
MP28W23G15 MS28W23G15 30-28 .05-.08 Gold 15µ”
MP28W23G30 MS28W23G30 30-28 .05-.08 Gold 30µ”
Tools
Contact Extraction Tool,
#20 (Ø 1.0) Contact
QXRT20
Hand Crimp Tool for
Machined Contacts
MFX-3959
Pneumatic Crimp Tool for
Machined Contact
MFX-3960
Machined Contacts
172
Connector Solutions
32 POSITIONS
5A, 7.5A /
150V
Shell Size: 18 Number of Contacts: 32 Contact Size: 20
Sealing: IP67 Salt Spray: 48h
Contacts (con’t)
SP20W1F SS20W1F 22-20 .34-.50 Gold Flash
SP20W1G5 SS20W1G5 22-20 .34-.50 Gold 5µ”
SP20W1G10 SS20W1G10 22-20 .34-.50 Gold 10µ”
SP20W1G15 SS20W1G15 22-20 .34-.50 Gold 15µ”
SP20W1G30 SS20W1G30 22-20 .34-.50 Gold 30µ”
SP24W1F SS24W1F 26-24 .14-.25 Gold Flash
SP24W1G5 SS24W1G5 26-24 .14-.25 Gold 5µ”
SP24W1G10 SS24W1G10 26-24 .14-.25 Gold 10µ”
SP24W1G15 SS24W1G15 26-24 .14-.25 Gold 15µ”
SP24W1G30 SS24W1G30 26-24 .14-.25 Gold 30µ”
SP28W1F SS28W1F 30-28 .05-.08 Gold Flash
SP28W1G5 SS28W1G5 30-28 .05-.08 Gold 5µ”
SP28W1G10 SS28W1G10 30-28 .05-.08 Gold 10µ”
SP28W1G15 SS28W1G15 30-28 .05-.08 Gold 15µ”
SP28W1G30 SS28W1G30 30-28 .05-.08 Gold 30µ”
Crimp Contacts, Stamped & Formed (5A Max)
PART NUMBER AWG Wire
Range
(mm²)
Plating
MALE FEMALE
Stamped & Formed Contacts
Tools
Contact Extraction Tool,
#20 (Ø 1.0) Contact
QXRT20
Crimp Die for Stamped &
Formed Contact
MFX-3957
Hand Tool, Stamped & Formed
Contact, Size 20, 20-28AWG
MFX-3958
173
Insert Arrangement
Pin (Male) Faceview
Connector Part Numbers
Part Number Connector
Type
Figure Drawings
Male Female Male Female
RT062448PNH RT062448SNH Plug 1 2
RT002448PNH RT002448SNH Square Flange
Receptacle 3,5 4,5
Contacts supplied separately see page 176
Shell Size: 24 Number of Contacts: 48 Contact Size: 16
Sealing: IP67 Salt Spray: 48h
Plug
Square Flange
Receptacles
STEP 1
Choose Receptacle Style STEP 2
Choose Plug Style
CONTACTS SOLD SEPARATELY SEE PAGE 176
RT062448PNH
RT062448SNH
RT002448PNH
RT002448SNH
Locking Clip with Lanyard
108039122
Sealing Plug
CA401659
Square Flange Receptacle
Gaskets, Thickness 1.0mm (±0.2)
RTFD24B
NEW!
See
Page
16
Accessories
An upgraded silicone seal is available for all connector parts.
Please add “03” to the end of the part number when ordering.
Operating Temperature: -40°C to +125°C. Not available in kits.
eco|mate® rm
Standard Products
• Suitable For Indoor and Outdoor Applications
• EMI/RMI Shielding Capability with Appropriate Backshell
• Operating Temperature: -40°C to +105°C
• 500 Mating Cycles
• Contacts and Cord Grips Ordered Separately
• UL ECBT2 Certied*
174
Connector Solutions
48 POSITIONS
13A / 300V
Dimensions Plug
Shell Size: 24 Number of Contacts: 48 Contact Size: 16
Sealing: IP67 Salt Spray: 48h
Dimensions Square Flange Receptacle
Square Flange Receptacle Panel Cutout
Figure 5
Plug
Figure 1 Male RT062448PNH
Plug
Figure 2 Female RT062448SNH
Square Flange Receptacle
Figure 3 Male RT002448PNH
Square Flange Receptacle
Figure 4 Female RT002448SNH
Figure 5
175
Shell Size: 24 Number of Contacts: 48 Contact Size: 16
Sealing: IP67 Salt Spray: 48h
Contacts
Crimp Contacts, Machined
Part Number AWG Wire
Range
(mm²)
Plating
Male Female
MP14M23F MS14M23F 14 2.0-2.5 Gold Flash
MP14M23G5 MS14M23G5 14 2.0-2.5 Gold 5µ”
MP14M23G10 MS14M23G10 14 2.0-2.5 Gold 10µ”
MP14M23G15 MS14M23G15 14 2.0-2.5 Gold 15µ”
MP14M23G30 MS14M23G30 14 2.0-2.5 Gold 30µ”
MP16M23F MS16M23F 18-16 .75-1.5 Gold Flash
MP16M23G5 MS16M23G5 18-16 .75-1.5 Gold 5µ”
MP16M23G10 MS16M23G10 18-16 .75-1.5 Gold 10µ”
MP16M23G15 MS16M23G15 18-16 .75-1.5 Gold 15µ”
MP16M23G30 MS16M23G30 18-16 .75-1.5 Gold 30µ”
MP20M23F MS20M23F 22-20 .34-.50 Gold Flash
MP20M23G5 MS20M23G5 22-20 .34-.50 Gold 5µ”
MP20M23G10 MS20M23G10 22-20 .34-.50 Gold 10µ”
MP20M23G15 MS20M23G15 22-20 .34-.50 Gold 15µ”
MP20M23G30 MS20M23G30 22-20 .34-.50 Gold 30µ”
MP24M23F MS24M23F 26-24 .14-.25 Gold Flash
MP24M23G5 MS24M23G5 26-24 .14-.25 Gold 5µ”
MP24M23G10 MS24M23G10 26-24 .14-.25 Gold 10µ”
MP24M23G15 MS24M23G15 26-24 .14-.25 Gold 15µ”
MP24M23G30 MS24M23G30 26-24 .14-.25 Gold 30µ”
Machined Contacts
Contact Extraction Tool,
#16 (Ø 1.6) Contact
QXRT16
Tools
Hand Crimp Tool
for Machined Contacts
MFX-3959
Pneumatic Crimp Tool for
Machined Contacts
MFX-3960
176
Connector Solutions
48 POSITIONS
13A / 300V
Shell Size: 24 Number of Contacts: 48 Contact Size: 16
Sealing: IP67 Salt Spray: 48h
Contacts (con’t)
SP14M1F SS14M1F 14 2.0-2.5 Gold Flash
SP14M1G5 SS14M1G5 14 2.0-2.5 Gold 5µ”
SP14M1G10 SS14M1G10 14 2.0-2.5 Gold 10µ”
SP14M1G15 SS14M1G15 14 2.0-2.5 Gold 15µ”
SP14M1G30 SS14M1G30 14 2.0-2.5 Gold 30µ”
SP16M1F SS16M1F 18-16 .75-1.5 Gold Flash
SP16M1G5 SS16M1G5 18-16 .75-1.5 Gold 5µ”
SP16M1G10 SS16M1G10 18-16 .75-1.5 Gold 10µ”
SP16M1G15 SS16M1G15 18-16 .75-1.5 Gold 15µ”
SP16M1G30 SS16M1G30 18-16 .75-1.5 Gold 30µ”
SP20M1F SS20M1F 22-20 .34-.50 Gold Flash
SP20M1G5 SS20M1G5 22-20 .34-.50 Gold 5µ”
SP20M1G10 SS20M1G10 22-20 .34-.50 Gold 10µ”
SP20M1G15 SS20M1G15 22-20 .34-.50 Gold 15µ”
SP20M1G30 SS20M1G30 22-20 .34-.50 Gold 30µ”
SP24M1F SS24M1F 22-20 .14-.25 Gold Flash
SP24M1G5 SS24M1G5 26-24 .14-.25 Gold 5µ”
SP24M1G10 SS24M1G10 26-24 .14-.25 Gold 10µ”
SP24M1G15 SS24M1G15 26-24 .14-.25 Gold 15µ”
SP24M1G30 SS24M1G30 26-24 .14-.25 Gold 30µ”
Crimp Contacts, Stamped & Formed
Part Number AWG Wire
Range
(mm²)
Plating
Male Female
Stamped & Formed Contacts
Contact Extraction Tool,
#16 (Ø 1.6) Contact
QXRT16
Crimp Die for Stamped
& Formed Contact
MFX-3957
Hand Tool, Stamped & Formed
Contact, Size 16, 20-14AWG
MFX-3954
Tools
177
Plug
Square Flange
Receptacles
STEP 1
Choose Receptacle Style STEP 2
Choose Plug Style
CONTACTS INCLUDED SEE PAGE 179
SEE TABLE ON NEXT PAGE FOR PART DETAILS
RTHP6121SNH-16S2
RTHP6121SNH16-BS2RTHP0121PN-H1
RTHP0121PN-16C
Crimp Barrel Contact Flat Hole Tail Contact
(receptacle only) Screw Tail Contact
(receptacle only)
178
Connector Solutions
1 POSITION
86A / 630V
Insert Arrangement
Pin (Male) Faceview
Shell Size: 12 Number of Contacts: 1 Contact Size: 3.6mm
Sealing: IP67 Salt Spray: 48h
Connector Part Numbers
Connector
Part Number Connector Type Wire
Range
(mm²) Amps Contact Figure
Drawings
Part Number Type AWG Plating
RTHP6121SNH-16S2
Female Plug
Straight, Crimp,
with Long
Shielded Backshell
10-16 86 MS6ARS8S Crimp
Barrel,
Female 8 Silver 1
RTHP6121SNH16-BS2
Female Plug
with 90°
Shielded
Backshell
10-16 86 MS6ARS8S Crimp
Barrel,
Female 8 Silver 2
RTHP0121PN-16C Male Square
Flange
Receptacle
Crimp
10-16 86 MP6ARS8S Crimp
Barrel,
Male 8 Silver 3,5
RTHP0121PN-H1 Male Square
Flange
Receptacle Flat
Tail
N/A 86 HPAHS Flathole
Tail,
Male 8 Silver 3,5
Contacts included. See chart for specic requirements
• Single Pole High Power
Arrangements
• 3.6mm Contact Size
• Operating Temperature:
-40°C to +125°C
• RoHS Compliant
• Operating Voltage: 630V
• Current Rating at 25°C: 86A
• Flammability Rating: UL94-V0
• High Reliability
• Low Contact Engagement /
Separation Forces
• Low Contact Resistance
• High Mating Cycle Durability
High Amperage eco|mate® rm with
RADSOK® Technology
179
Dimensions Plug
Shell Size: 12 Number of Contacts: 1 Contact Size: 3.6mm
Sealing: IP67 Salt Spray: 48h
Plug Straight, Crimp, Long Shielded Backshell
Figure 1Female RTHP6121SNH-16S2
Plug with 90° Shielded Backshell
Figure 2Female RTHP6121SNH16-BS2
180
Connector Solutions
Dimensions Square Flange Receptacle
Shell Size: 12 Number of Contacts: 1 Contact Size: 3.6mm
Sealing: IP67 Salt Spray: 48h
Square Flange Receptacle Panel Cutout
Figure 5
1 POSITION
86A / 630V
Square Flange Receptacle Flat Tail
Figure 4 Male RTHP0121PN-H1
Square Flange Receptacle Crimp
Figure 3Male RTHP0121PN1-6C
181
Plug
Square Flange
Receptacles
STEP 1
Choose Receptacle Style STEP 2
Choose Plug Style
CONTACTS INCLUDED SEE PAGE 183
SEE TABLE ON NEXT PAGE FOR PART DETAILS
RTHP6141SNH25-BS2
RTHP6141SNH25-EC
RTHP6141SNH25-PS2
RTHP6141SNH-25S2
RTHP0141PN-25C
RTHP0141PN-H1
RTHP0141PN-M1
Crimp Barrel Contact Flat Hole Tail Contact
(receptacle only) Screw Tail Contact
(receptacle only)
182
Connector Solutions
1 POSITION
120A / 630V
Insert Arrangement
Pin (Male) Faceview
Shell Size: 14 Number of Contacts: 1 Contact Size: 6mm
Sealing: IP67 Salt Spray: 48h
Connector Part Numbers
Connector
Part Number Connector Type Wire
Range
(mm²) Amps Contact Figure
Drawings
Part Number Type AWG Plating
RTHP6141SNH25-EC
Female Plug
with Unshielded
Short Backshell
and End Cap
with Individual
Rear Wire Seal
20-25 120 HS25BCS Crimp
Barrel,
Female 4Silver 1
RTHP6141SNH25-PS2 Female Plug
with Short
Shielded
Backshell 20-25 120 HS25BCS Crimp
Barrel,
Female 4Silver 2
RTHP6141SNH-25S2 Female Plug
Straight, Crimp,
Long Shielded
Backshell 20-25 120 HS25BCS Crimp
Barrel,
Female 4Silver 3
RTHP6141SNH25-BS2 Female Plug
with 90°
Shielded
Backshell 20-25 120 HS25BCS Crimp
Barrel,
Female 4Silver 4
RTHP0141PN-25C Male Square
Flange
Receptacle
Crimp 20-25 120 HP25BCS Crimp
Barrel,
Male 4Silver 5,8
RTHP0141PN-H1 Male Square
Flange
Receptacle Flat
Tail
N/A 120 HPBHS Flathole
Tail,
Male 4Silver 6,8
RTHP0141PN-M1 Male Square
Flange
Receptacle
with Screw Tail
N/A 120 HPBSS Screw
Tail,
Male 4Silver 7,8
Contacts included. See chart for specic requirements
• Single Pole High Power
Arrangements
• 6mm Contact Size
• Operating Temperature:
-40°C to +125°C
• RoHS Compliant
• Operating Voltage: 630V
• Current Rating at 25°C: 120A
• Flammability Rating: UL94-V0
• High Reliability
• Low Contact Engagement /
Separation Forces
• Low Contact Resistance
• High Mating Cycle Durability
High Amperage eco|mate® rm with
RADSOK® Technology
183
Dimensions Plug
Shell Size: 14 Number of Contacts: 1 Contact Size: 6mm
Sealing: IP67 Salt Spray: 48h
Plug with 90° Shielded Backshell
Figure 4Female RTHP6141SNH25-BS2
Plug with Unshielded Backshell
Figure 1 Female RTHP6141SNH25-EC
Plug with Short Shielded Backshell
Figure 2 Female RTHP6141SNH25-PS2
Plug Straight, Crimp, Long Shielded Backshell
Figure 3 Female RTHP6141SNH-25S2
184
Connector Solutions
Dimensions Square Flange Receptacle
Shell Size: 14 Number of Contacts: 1 Contact Size: 6mm
Sealing: IP67 Salt Spray: 48h
Square Flange Receptacle Panel Cutout
Figure 8
1 POSITION
120A / 630V
Square Flange Receptacle Crimp
Figure 5 Male RTHP0141PN-25C
Square Flange Receptacle Flat Tail
Figure 6 Male RTHP0141PN-H1
Square Flange Receptacle with Screw Tail
Figure 7 Male RTHP0141PN-M1
185
Plug
Square Flange
Receptacles
STEP 1
Choose Receptacle Style STEP 2
Choose Plug Style
CONTACTS INCLUDED SEE PAGE 187
SEE TABLE ON NEXT PAGE FOR PART DETAILS
RTHP0161PN-H1
RTHP0161PN-35C
Crimp Barrel Contact Flat Hole Tail Contact
(receptacle only) Screw Tail Contact
(receptacle only)
RTHP0161PN-M1 RTHP6161SNH-35S2
RTHP6161SNH25-PS3
RTHP6161SNH50-PS2
RTHP0161PN-50C RTHP6161SNH35-PS2
186
Connector Solutions
1 POSITION
120A - 180A /
630V
Insert Arrangement
Pin (Male) Faceview
Connector Part Numbers
Connector
Part Number Connector Type Wire
Range
(mm²) Amps Contact Figure
Drawings
Part Number Type AWG Plating
RTHP6161SNH25-PS3 Female Plug with
Short Shielded
Backshell 20-25 120 HS25CCS Crimp
Barrel,
Female 4 Silver 1
RTHP6161SNH35-PS2 Female Plug with
Short Shielded
Backshell 30-35 130 HS35CCS Crimp
Barrel,
Female 2 Silver 2
RTHP6161SNH50-PS2 Female Plug with
Short Shielded
Backshell 45-50 180 HS50CCS Crimp
Barrel,
Female 2 Silver 3
RTHP6161SNH-35S2
Female Plug
Straight, Crimp,
Long Shielded
Backshell
30-35 130 HS35CCS Crimp
Barrel,
Female 2 Silver 4
RTHP0161PN-35C
Male Square
Flange
Receptacle
Crimp
30-35 130 HP35CCS Crimp
Barrel,
Male 2 Silver 5,9
RTHP0161PN-50C
Male Square
Flange
Receptacle with
Crimp
40-50 130 HP50CCS Crimp
Barrel,
Male 2 Silver 6,9
RTHP0161PN-H1
Male Square
Flange
Receptacle Flat
Tail
N/A 180 HPCHS Flathole
Tail,
Male N/A Silver 7,9
RTHP0161PN-M1
Male Square
Flange
Receptacle with
Screw Tail
N/A 180 HPCSS Screw
Tail,
Male N/A Silver 8,9
Contacts included. See chart for specic requirements
Shell Size: 16 Number of Contacts: 1 Contact Size: 8mm
Sealing: IP67 Salt Spray: 48h
• Single Pole High Power
Arrangements
• 8mm Contact Size
• Operating Temperature:
-40°C to +125°C
• RoHS Compliant
• Operating Voltage: 630V
• Current Rating at 25°C: 180A
• Flammability Rating: UL94-V0
• High Reliability
• Low Contact Engagement /
Separation Forces
• Low Contact Resistance
• High Mating Cycle Durability
High Amperage eco|mate® rm with
RADSOK® Technology
187
Dimensions Plug
Shell Size: 16 Number of Contacts: 1 Contact Size: 8mm
Sealing: IP67 Salt Spray: 48h
Plug Straight, Crimp, Long Shielded Backshell
Figure 4Female RTHP6161SNH-35S2
Plug with Short Shielded Backshell
Figure 2 Female RTHP6161SNH35-PS2
Plug with Short Shield Backshell
Figure 1 Female RTHP6161SNH25-PS3
Plug with Short Shielded Backshell
Figure 3Female RTHP6161SNH50-PS2
188
Connector Solutions
Dimensions Square Flange Receptacle
Shell Size: 16 Number of Contacts: 1 Contact Size: 8mm
Sealing: IP67 Salt Spray: 48h
1 POSITION
120A - 180A /
630V
Square Flange Receptacle with Crimp
Figure 6 Male RTHP0161PN-50C
Square Flange Receptacle Crimp
Figure 5 Male RTHP0161PN-35C
Square Flange Receptacle with Screw Tail
Figure 8 Male RTHP0161PN-M1
Square Flange Receptacle Flat Tail
Figure 7 Male RTHP0161PN-H1
Square Flange Receptacle Panel Cutout
Figure 9
189
Plug
Square Flange
Receptacles
STEP 1
Choose Receptacle Style STEP 2
Choose Plug Style
CONTACTS SOLD SEPARATELY SEE PAGE 191
SEE TABLE ON NEXT PAGE FOR PART DETAILS
RTHP0201PN-50C
RTHP0201PN-70C
RTHP0201PN-95C
RTHP0201PN-H1
RTHP0201PN-M1
RTHP6201SNH25-PS5
RTHP6201SNH35-PS2
RTHP6201SNH50-PS2
RTHP6201SNH70-PS1
RTHP6201SNH95-PS2
RTHP6201SNH70-PS2
190
Connector Solutions
1 POSITION
120A - 300A /
630V
Insert Arrangement
Pin (Male) Faceview
Shell Size: 20 Number of Contacts: 1 Contact Size: 10mm
Sealing: IP67 Salt Spray: 48h
Connector Part Numbers
Connector
Part Number Connector Type Wire
Range
(mm²) Amps Contact Figure
Drawings
Part Number Type AWG Plating
RTHP6201SNH25-PS5 Female Plug with Short
Shielded Backshell 20-25 120 HS25DCS Crimp
Barrel,
Female 4 Silver 1
RTHP6201SNH35-PS2 Female Plug with Short
Shielded Backshell 30-35 130 HS35DCS Crimp
Barrel,
Female 4 Silver 2
RTHP6201SNH50-PS2 Female Plug with Short
Shielded Backshell 40-50 180 HS50DCS Crimp
Barrel,
Female 1/0-0 Silver 3
RTHP6201SNH70-PS1 Female Plug with Short
Shielded Backshell 60-70 250 HS70DCS Crimp
Barrel,
Female 2/0-0 Silver 4
RTHP6201SNH70-PS2 Female Plug with Short
Shielded Backshell 60-70 250 HS70DCS Crimp
Barrel,
Female 2/0-0 Silver 5
RTHP6201SNH95-PS2 Female Plug with Short
Shielded Backshell 85-95 300 HS95DCS Crimp
Barrel,
Female 3/0-0 Silver 6
RTHP0201PNH-50C Male Square Flange
Receptacle Crimp 40-50 180 HP50DCS Crimp
Barrel,
Male 1/0-0 Silver 7,12
RTHP0201PNH-70C Male Square Flange
Receptacle with Crimp 60-70 250 HP70DCS Crimp
Barrel,
Male 2/0-0 Silver 8,12
RTHP0201PNH-95C Male Square Flange
Receptacle with Crimp 85-95 300 HP95DCS Crimp
Barrel,
Male 3/0-0 Silver 9,12
RTHP0201PNH-H1 Male Square Flange
Receptacle with Flat Tail N/A 300 HPDHS Flathole
Tail,
Male N/A Silver 10,12
RTHP0201PNH-M1 Male Square Flange
Receptacle with Screw
Tail N/A 300 HPDSS Screw
Tail,
Male N/A Silver 11,12
Contacts included. See chart for specic requirements
• Single Pole High Power
Arrangements
• 10mm Contact Size
• Operating Temperature:
-40°C to +125°C
• RoHS Compliant
• Operating Voltage: 630V
• Current Rating at 25°C: 300A
• Flammability Rating: UL94-V0
• High Reliability
• Low Contact Engagement /
Separation Forces
• Low Contact Resistance
• High Mating Cycle Durability
High Amperage eco|mate® rm with
RADSOK® Technology
191
Dimensions Plug
Shell Size: 20 Number of Contacts: 1 Contact Size: 10mm
Sealing: IP67 Salt Spray: 48h
Plug with Short Shielded Backshell
Figure 1 Female RTHP6201SNH25-PS5
Plug with Short Shielded Backshell
Figure 2 Female RTHP6201SNH35-PS2
Plug with Short Shielded Backshell
Figure 3 Female RTHP6201SNH50-PS2
Plug with Short Shielded Backshell
Figure 4 Female RTHP6201SNH70-PS1
192
Connector Solutions
1 POSITION
120A - 300A /
630V
Dimensions Plug (con’t)
Shell Size: 20 Number of Contacts: 1 Contact Size: 10mm
Sealing: IP67 Salt Spray: 48h
Plug with Short Shielded Backshell
Figure 5 Female RTHP6201SNH70-PS2
Plug with Short Shielded Backshell
Figure 6 Female RTHP6201SNH95-PS2
193
Dimensions Square Flange Receptacle
Shell Size: 20 Number of Contacts: 1 Contact Size: 10mm
Sealing: IP67 Salt Spray: 48h
Square Flange Receptacle Crimp
Figure 7 Male RTHP0201PN-50C
Square Flange Receptacle with Crimp
Figure 8Male RTHP0201PN-70C
Square Flange Receptacle with Crimp
Figure 9Male RTHP0201PN-95C
Square Flange Receptacle with Flat Tail
Figure 10 Male RTHP0201PN-H1
194
Connector Solutions
Square Flange Receptacle Panel Cutout
Figure 12
Shell Size: 20 Number of Contacts: 1 Contact Size: 10mm
Sealing: IP67 Salt Spray: 48h
Contacts
Crimp Barrel Contact
1 POSITION
120A - 300A /
630V
Dimensions Square Flange Receptacle (con’t)
Square Flange Receptacle with Screw Tail
Figure 11Male RTHP0201PN-M1
Flat Hole Tail Contact
(receptacle only) Screw Tail Contact
(receptacle only)
195
Plug
Square Flange
Receptacles
STEP 1
Choose Receptacle Style STEP 2
Choose Plug Style
CONTACTS INCLUDED SEE PAGE 197
SEE TABLE ON NEXT PAGE FOR PART DETAILS
RTHP6203PNH-16S2
RTHP6203SNH-16S2
RTHP0203SNH-16C
Crimp Barrel Contact
Flat Hole Tail Contact
(receptacle only) Screw Tail Contact
(receptacle only)
RTHP0203PNH-16C
196
Connector Solutions
3 POSITIONS
86A / 630V
Insert Arrangement
Pin (Male) Faceview
Shell Size: 20 Number of Contacts: 3 Contact Size: 3.6 mm
Sealing: IP67 Salt Spray: 48h
Connector
Part Number Connector Type Wire
Range
(mm²) Amps Contact Figure
Drawings
Part Number Type AWG Plating
RTHP6203PNH-16S2 Male 3 Position
Plug with
Shielded
Backshell
10-16 86 MP6ARS8S Crimp
Barrel,
Male 8 Silver 1
RTHP6203SNH-16S2 Female 3
Position Plug
with Shielded
Backshell
10-16 86 MS6ARS8S Crimp
Barrel,
Female 8 Silver 2
RTHP0203PNH-16C Male Square
Flange
Receptacle
with Crimp
10-16 86 MP6ARS8S Crimp
Barrel,
Male Silver 3,5
RTHP0203SNH-16C Female
Square Flange
Receptacle
with Crimp
10-16 86 MS6ARS8S Crimp
Barrel,
Female Silver 4,5
Contacts included. See chart for specic requirements
• Single Pole High Power
Arrangements
• 3.6mm Contact Size
• Operating Temperature:
-40°C to +125°C
• RoHS Compliant
• Operating Voltage: 630V
• Current Rating at 25°C: 86A
• Flammability Rating: UL94-V0
• High Reliability
• Low Contact Engagement /
Separation Forces
• Low Contact Resistance
• High Mating Cycle Durability
High Amperage eco|mate® rm with
RADSOK® Technology
197
Dimensions Plug
Shell Size: 20 Number of Contacts: 3 Contact Size: 3.6 mm
Sealing: IP67 Salt Spray: 48h
3 Position Plug with Shielded Backshell
Figure 1 Male RTHP6203PNH-16S2
3 Position Plug with Shielded Backshell
Figure 2 Female RTHP6203SNH-16S2
198
Connector Solutions
Dimensions Square Flange Receptacle
Square Flange Receptacle Panel Cutout
Figure 5
Square Flange Receptacle with Crimp
Figure 3 Male RTHP0203PNH-16C
Square Flange Receptacle with Crimp
Figure 4 Female RTHP0203SNH-16C
Shell Size: 20 Number of Contacts: 3 Contact Size: 3.6 mm
Sealing: IP67 Salt Spray: 48h
3 POSITIONS
86A / 630V
199
Contacts
Contact Overview
eco|mate® rm rugged metal shielded connectors and contacts are sold separately.
The contacts are offered in 2 types: machined and stamped & formed. The machined
contacts are available in 3 styles: Standard, RADSOK®, and PCB.
eco|mate® rm contacts are offered in multiple sizes and are designed to be used in
any connector with the same active part size regardless of shell size. See our Connector
Guide starting at page 6 for matching parts and contacts.
Our customers can then choose to buy only one type of contact to equip all of their
connectors, even if the shell sizes vary. Our standardized connector solutions makes it
easy for our customers to reduce their costs and simplify assembly.
The eco|mate® rm rugged metal shielded connectors and contacts are easy to install
and remove.
Machined contacts are generally
chosen as a better solution for
power applications or when lower
quantities are needed.
Stamped & Formed contacts are
available automatically crimped,
making them ideal for high volume
production applications.
Technical information about crimped contacts on page 233
200
Contacts
Amphenol offers two types of electrical contacts:
Machined
Stamped & Formed
Standard Quantity Order Options
Stamped & Formed Machined
• 25 pieces
• bulk package
• 3000 pieces
• reel
• 25 pieces
• bulk package
• 1000 pieces
• bulk package
Plating and Bulk Order Options
Contacts
Plating Options
Symbol Plating
T Tin Plated (For Stamped and Formed Contacts)
S Silver Plated 5 Um (For Machined Contacts)
F Gold Plated
G5 Gold Plated (Thickness 5µ”)
G10 Gold Plated (Thickness 10µ”)
G15 Gold Plated (Thickness 15µ”)
G30 Gold Plated (Thickness 30µ”)
Contacts supplied separately
201
Stamped & Formed Crimped Contact Part Numbers
Contacts
Contact Size AWG Wire
range
mm ²
Current
(A) Electrical
Resistance
Insulation
Diameter
(mm) Plating PART NUMBER
Male Female
2.5mm 14-12 2.5-3.5 23 -- 4.3 Tin SP12A1T SS12A1T
16 (Ø1.6mm) 14 2.0-2.5 13 <6mΩ 3.2 Gold Flash SP14M1F SS14M1F
16 (Ø1.6mm) 14 2.0-2.5 13 <6mΩ 3.2 Gold 5µ” SP14M1G5 SS14M1G5
16 (Ø1.6mm) 14 2.0-2.5 13 <6mΩ 3.2 Gold 10µ” SP14M1G10 SS14M1G10
16 (Ø1.6mm) 14 2.0-2.5 13 <6mΩ 3.2 Gold 15µ” SP14M1G15 SS14M1G15
16 (Ø1.6mm) 14 2.0-2.5 13 <6mΩ 3.2 Gold 30µ” SP14M1G30 SS14M1G30
16 (Ø1.6mm) 18-16 .75-1.5 13 <6mΩ 3.2 Gold Flash SP16M1F SS16M1F
16 (Ø1.6mm) 18-16 .75-1.5 13 <6mΩ 3.2 Gold 5µ” SP16M1G5 SS16M1G5
16 (Ø1.6mm) 18-16 .75-1.5 13 <6mΩ 3.2 Gold 10µ” SP16M1G10 SS16M1G10
16 (Ø1.6mm) 18-16 .75-1.5 13 <6mΩ 3.2 Gold 15µ” SP16M1G15 SS16M1G15
16 (Ø1.6mm) 18-16 .75-1.5 13 <6mΩ 3.2 Gold 30µ” SP16M1G30 SS16M1G30
16 (Ø1.6mm) 22-20 .34-.50 13 <6mΩ 3.2 Gold Flash SP20M1F SS20M1F
16 (Ø1.6mm) 22-20 .34-.50 13 <6mΩ 3.2 Gold 5µ” SP20M1G5 SS20M1G5
16 (Ø1.6mm) 22-20 .34-.50 13 <6mΩ 3.2 Gold 10µ” SP20M1G10 SS20M1G10
16 (Ø1.6mm) 22-20 .34-.50 13 <6mΩ 3.2 Gold 15µ” SP20M1G15 SS20M1G15
16 (Ø1.6mm) 22-20 .34-.50 13 <6mΩ 3.2 Gold 30µ” SP20M1G30 SS20M1G30
16 (Ø1.6mm) 26-24 .14-.25 13 <6mΩ 3.2 Gold Flash SP24M1F SS24M1F
16 (Ø1.6mm) 26-24 .14-.25 13 <6mΩ 3.2 Gold 5µ” SP24M1G5 SS24M1G5
Available in Packages of 25 pieces or the Standard Reel Size of 3,000 pieces
Stamped & Formed Contacts
202
Contacts
Contacts
Stamped & Formed Contact Part Numbers (con’t)
16 (Ø1.6mm) 26-24 .14-.25 13 <6mΩ 3.2 Gold 10µ” SP24M1G10 SS24M1G10
16 (Ø1.6mm) 26-24 .14-.25 13 <6mΩ 3.2 Gold 15µ” SP24M1G15 SS24M1G15
16 (Ø1.6mm) 26-24 .14-.25 13 <6mΩ 3.2 Gold 30µ” SP24M1G30 SS24M1G30
20 (Ø1.mm) 22-20 .34-.50 5 <15mΩ 2.6 Gold Flash SP20W1F SS20W1F
20 (Ø1.mm) 22-20 .34-.50 5 <15mΩ 2.6 Gold 5µ” SP20W1G5 SS20W1G5
20 (Ø1.mm) 22-20 .34-.50 5 <15mΩ 2.6 Gold 10µ” SP20W1G10 SS20W1G10
20 (Ø1.mm) 22-20 .34-.50 5 <15mΩ 2.6 Gold 15µ” SP20W1G15 SS20W1G15
20 (Ø1.mm) 22-20 .34-.50 5 <15mΩ 2.6 Gold 30µ” SP20W1G30 SS20W1G30
20 (Ø1.mm) 26-24 .14-.25 5 <15mΩ 2.6 Gold Flash SP24W1F SS24W1F
20 (Ø1.mm) 26-24 .14-.25 5 <15mΩ 2.6 Gold 5µ” SP24W1G5 SS24W1G5
20 (Ø1.mm) 26-24 .14-.25 5 <15mΩ 2.6 Gold 10µ” SP24W1G10 SS24W1G10
20 (Ø1.mm) 26-24 .14-.25 5 <15mΩ 2.6 Gold 15µ” SP24W1G15 SS24W1G15
20 (Ø1.mm) 26-24 .14-.25 5 <15mΩ 2.6 Gold 30µ” SP24W1G30 SS24W1G30
20 (Ø1.mm) 30-28 .05-.08 5 <15mΩ 2.6 Gold Flash SP28W1F SS28W1F
20 (Ø1.mm) 30-28 .05-.08 5 <15mΩ 2.6 Gold 5µ” SP28W1G5 SS28W1G5
20 (Ø1.mm) 30-28 .05-.08 5 <15mΩ 2.6 Gold 10µ” SP28W1G10 SS28W1G10
20 (Ø1.mm) 30-28 .05-.08 5 <15mΩ 2.6 Gold 15µ” SP28W1G15 SS28W1G15
20 (Ø1.mm) 30-28 .05-.08 5 <15mΩ 2.6 Gold 30µ” SP28W1G30 SS28W1G30
Available in Packages of 25 pieces or the Standard Reel Size of 3,000 pieces
Contact Size AWG Wire
range
mm ²
Current
(A) Electrical
Resistance
Insulation
Diameter
(mm) Plating PART NUMBER
Male Female
Stamped & Formed Contacts
203
Contacts
PCB Contacts
PCB Machined Contact Part Numbers
Contact Size Description Plating PART NUMBER
Male Female
20 Short Version Gold Flash MP20W12E06F MS20W12E06F
20 Short Version Gold 5µ" MP20W12E06G5 MS20W12E06G5
20 Short Version Gold 10µ" MP20W12E06G10 MS20W12E06G10
20 Short Version Gold 15µ" MP20W12E06G15 MS20W12E06G15
20 Short Version Gold 30µ" MP20W12E06G30 MS20W12E06G30
20 Long Version Gold Flash MP20W12E09F MS20W12E09F
20 Long Version Gold 5µ" MP20W12E09G5 MS20W12E09G5
20 Long Version Gold 10µ" MP20W12E09G10 MS20W12E09G10
20 Long Version Gold 15µ" MP20W12E09G15 MS20W12E09G15
20 Long Version Gold 30µ" MP20W12E09G30 MS20W12E09G30
16 Short Version Gold Flash MP16M12E06F MS16M12E06F
16 Short Version Gold 5µ" MP16M12E06G5 MS16M12E06G5
16 Short Version Gold 10µ" MP16M12E06G10 MS16M12E06G10
16 Short Version Gold 15µ" MP16M12E06G15 MS16M12E06G15
16 Short Version Gold 30µ" MP16M12E06G30 MS16M12E06G30
16 Long Version Gold Flash MP16M12E09F MS16M12E09F
204
Contacts
Contacts
Contact Size Description Plating PART NUMBER
Male Female
16 Long Version Gold 5µ" MP16M12E09G5 MS16M12E09G5
16 Long Version Gold 10µ" MP16M12E09G10 MS16M12E09G10
16 Long Version Gold 15µ" MP16M12E09G15 MS16M12E09G15
16 Long Version Gold 30µ" MP16M12E09G30 MS16M12E09G30
2.5 mm Short Version Gold Flash MP10B12E05F MS10B12E05F
2.5 mm Short Version Gold 5µ" MP10B12E05G5 MS10B12E05G5
2.5 mm Short Version Gold 10µ" MP10B12E05G10 MS10B12E05G10
2.5 mm Short Version Gold 15µ" MP10B12E05G15 MS10B12E05G15
2.5 mm Short Version Gold 30µ" MP10B12E05G30 MS10B12E05G30
2.5 mm Long Version Gold Flash MP10B12E08F MS10B12E08F
2.5 mm Long Version Gold 5µ" MP10B12E08G5 MS10B12E08G5
2.5 mm Long Version Gold 10µ" MP10B12E08G10 MS10B12E08G10
2.5 mm Long Version Gold 15µ" MP10B12E08G15 MS10B12E08G15
2.5 mm Long Version Gold 30µ" MP10B12E08G30 MS10B12E08G30
Available in Standard Package Sizes: 25 or 1,000 pieces
PCB Soldering
The PNPCF series can be used in a wave soldering process, but not in a reow soldering process.
All high temperature processes are prohibited.
PCB Machined Contact Part Numbers (con’t)
205
PCB Contacts Dimensions
Contacts
Nominal Length G (mm)
Dimensions of dipsolder contacts out of connector
(contacts to be ordered separately)
All dimensions are in mm
xx=plating options
Shell
Size
Pin Contact
MP20W12E06xx MP20W12E09xx MP16M12E04xx MP16M12E06xx MP10B12E05xx MP10B12E08xx
10 4.0 9.5 4.0 8.0 -- --
12 4.0 9.5 4.0 8.0 5.0 --
14 4.0 9.5 4.0 8.0 5.2 --
16 4.0 9.5 4.0 8.0 -- --
18 -- 9.5 4.0 8.0 -- --
20 -- 9.5 4.0 8.0 -- --
24 -- -- -- 3.9 -- --
Shell
Size
Socket Contact
MS20W12E06xx MS20W12E09xx MS16M12E04xx MS16M12E06xx MS10B12E05xx MS10B12E08xx
10 3.3 8.5 2.4 3.0 -- --
12 3.3 8.5 2.4 3.0 -- --
14 3.3 8.5 2.4 3.0 -- --
16 3.3 8.5 2.4 3.0 -- --
18 -- 8.5 2.4 -- -- --
20 -- 8.5 2.4 -- -- --
24 -- -- -- -- -- --
206
Contacts
Contact Size AWG Wire Range mm ² Plating Electrical
Resistance
Part Number
Male Female
8 (Ø3.6mm) 12-10 3.0-6.0 Silver <5mΩ MP10A23S MS10A23S
16 (Ø1.6mm) 14 2.0-2.5 Gold Flash <6mΩ MP14M23F MS14M23F
16 (Ø1.6mm) 14 2.0-2.5 Gold 5µ” <6mΩ MP14M23G5 MS14M23G5
16 (Ø1.6mm) 14 2.0-2.5 Gold 10µ” <6mΩ MP14M23G10 MS14M23G10
16 (Ø1.6mm) 14 2.0-2.5 Gold 15µ” <6mΩ MP14M23G15 MS14M23G15
16 (Ø1.6mm) 14 2.0-2.5 Gold 30µ” <6mΩ MP14M23G30 MS14M23G30
16 (Ø1.6mm) 18-16 .75-1.5 Gold Flash <6mΩ MP16M23F MS16M23F
16 (Ø1.6mm) 18-16 .75-1.5 Gold 5µ” <6mΩ MP16M23G5 MS16M23G5
16 (Ø1.6mm) 18-16 .75-1.5 Gold 10µ” <6mΩ MP16M23G10 MS16M23G10
16 (Ø1.6mm) 18-16 .75-1.5 Gold 15µ” <6mΩ MP16M23G15 MS16M23G15
16 (Ø1.6mm) 18-16 .75-1.5 Gold 30µ” <6mΩ MP16M23G30 MS16M23G30
16 (Ø1.6mm) 22-20 .34-.50 Gold Flash <6mΩ MP20M23F MS20M23F
16 (Ø1.6mm) 22-20 .34-.50 Gold 5µ” <6mΩ MP20M23G5 MS20M23G5
16 (Ø1.6mm) 22-20 .34-.50 Gold 10µ” <6mΩ MP20M23G10 MS20M23G10
16 (Ø1.6mm) 22-20 .34-.50 Gold 15µ” <6mΩ MP20M23G15 MS20M23G15
16 (Ø1.6mm) 22-20 .34-.50 Gold 30µ” <6mΩ MP20M23G30 MS20M23G30
Machined Standard Crimp Contact Part Numbers
Contacts
continued on next page
Machined Contacts
207
16 (Ø1.6mm) 26-24 .14-.25 Gold Flash <6mΩ MP24M23F MS24M23F
16 (Ø1.6mm) 26-24 .14-.25 Gold 5µ” <6mΩ MP24M23G5 MS24M23G5
16 (Ø1.6mm) 26-24 .14-.25 Gold 10µ” <6mΩ MP24M23G10 MS24M23G10
16 (Ø1.6mm) 26-24 .14-.25 Gold15µ” <6mΩ MP24M23G15 MS24M23G15
16 (Ø1.6mm) 26-24 .14-.25 Gold 30µ” <6mΩ MP24M23G30 MS24M23G30
20 (Ø1.mm) 22-20 .34-.50 Gold Flash <15mΩ MP20W23F MS20W23F
20 (Ø1.mm) 22-20 .34-.50 Gold 5µ” <15mΩ MP20W23G5 MS20W23G5
20 (Ø1.mm) 22-20 .34-.50 Gold 10µ” <15mΩ MP20W23G10 MS20W23G10
20 (Ø1.mm) 22-20 .34-.50 Gold 15µ” <15mΩ MP20W23G15 MS20W23G15
20 (Ø1.mm) 22-20 .34-.50 Gold 30µ” <15mΩ MP20W23G30 MS20W23G30
20 (Ø1.mm) 26-24 .13-.25 Gold Flash <15mΩ MP24W23F MS24W23F
20 (Ø1.mm) 26-24 .13-.25 Gold 5µ” <15mΩ MP24W23G5 MS24W23G5
20 (Ø1.mm) 26-24 .13-.25 Gold 10µ"" <15mΩ MP24W23G10 MS24W23G10
20 (Ø1.mm) 26-24 .13-.25 Gold 15µ” <15mΩ MP24W23G15 MS24W23G15
20 (Ø1.mm) 26-24 .13-.25 Gold 30µ” <15mΩ MP24W23G30 MS24W23G30
20 (Ø1.mm) 30-28 .05-.08 Gold Flash <15mΩ MP28W23F MS28W23F
20 (Ø1.mm) 30-28 .05-.08 Gold 5µ” <15mΩ MP28W23G5 MS28W23G5
20 (Ø1.mm) 30-28 .05-.08 Gold 10µ” <15mΩ MP28W23G10 MS28W23G10
20 (Ø1.mm) 30-28 .05-.08 Gold 15µ” <15mΩ MP28W23G15 MS28W23G15
20 (Ø1.mm) 30-28 .05-.08 Gold 30µ” <15mΩ MP28W23G30 MS28W23G30
Available in Standard Package Sizes: 25 or 1,000 pieces
Machined Standard Crimp Contact Part Numbers(con’t)
Contacts
Contact Size AWG Wire Range mm ² Plating Electrical
Resistance
Part Number
Male Female
208
Contacts
Contacts
RADSOK® Contacts
Crimp Barrel Contact
Flat Hole Tail Contact
Screw Tail Contact
RADSOK® Technical Data
High Reliability
Unique RADSOK® design and construction technology creates an electrical
contact interface that exceeds typical interconnect requirements.
Applications in Aerospace, Medical, Industrial, Automotive, Mining, Offshore
and other harsh environments depend on the high reliability of Amphenol
RADSOK® technology.
Low Contact Engagement/Separation Forces
The hyperbolic lamella socket contact construction distributes normal forces
over a high percentage of the mating surface. This creates a smooth, even
engagement effort. This force distribution also contributes to excellent
performance in vibration applications with resistance to typical fretting
corrosion.
Low Contact Resistance
The large interface between the socket lamella and pin surface result in very
low contact resistance, enabling the RADSOK® contacts high current ratings
compared to traditional power contact designs.
High Mating Cycle Durability
RADSOK® contacts with typical silver plating nishes have demonstrated
survival of 10,000 mating cycles. Even with continuous exposure to harsh
environmental abuse (salt, sand and high humidity), RADSOK® contacts
have been tested to maintain low contact resistance beyond 10,000 mating
cycles.
For more technical information about RADSOK® see page 226
• Cost effective production using
stamp & form technology
• Fully automated production for full
press capability
• Low insertion and extraction forces
RADSOK® Benets at a Glance
• High number of mating cycles
• Reduced assembly effort
• Contact coverage up to 65%
• Long lasting contact normal forces
guaranteed through optimal grid technology
• Self cleaning effect during the mating process
• No torque resistance required of electrical
housing - allowing for easier designs
• Absorption of vibrations
209
Contacts
RADSOK® Machined Contact Part Numbers
Contact Size Description Wire
Range
AWG
Wire range
mm ² Plating Electrical
Resistance
PART NUMBER
Male Female
3.6mm Crimp Barrel 8 10-16 Silver <1.0mΩ MP6ARS8S MS6ARS8S
3.6mm Crimp Barrel 8 8-10 Silver <1.0mΩ HP10ACS HS10ACS
3.6mm Screw Tail N/A N/A Silver <1.0mΩ HPASS HSASS
3.6mm Flathole Tail N/A N/A Silver <1.0mΩ HPAHS HSAHS
6mm Crimp Barrel 4 20-25 Silver <1.0mΩ HP25BCS HS25BCS
6mm Screw Tail N/A N/A Silver <1.0mΩ HPBSS HSBSS
6mm Flathole Tail N/A N/A Silver <1.0mΩ HPBHS HSBHS
8mm Crimp Barrel 4 20-25 Silver <1.0mΩ -- HS25CCS
8mm Crimp Barrel 2 30-35 Silver <1.0mΩ HP35CCS HS35CCS
8mm Crimp Barrel 2 30-35 Silver <1.0mΩ HP50CCS HS50CCS
8mm Screw Tail N/A N/A Silver <1.0mΩ HPCSS HSCSS
8mm Flathole Tail N/A N/A Silver <1.0mΩ HPCHS HSCHS
10mm Crimp Barrel 4 20-25 Silver <1.0mΩ -- HS25DCS
10mm Crimp Barrel 2 30-35 Silver <1.0mΩ -- HS35DCS
10mm Crimp Barrel 1/0-1 40-50 Silver <1.0mΩ HP50DCS HS50DCS
10mm Crimp Barrel 2/0-1 60-70 Silver <1.0mΩ HP70DCS HS70DCS
10mm Crimp Barrel 3/0-1 85-95 Silver <1.0mΩ HP95DCS HS95DCS
10mm Screw Tail N/A N/A Silver <1.0mΩ HPDSS HSDSS
10mm Flathole Tail N/A N/A Silver <1.0mΩ HPDHS HSDHS
Available in Standard Package Size: 25 or 1,000 pieces
Contact Size 25° C
Amperage
3.6mm 86 A
6mm 120A
8mm 180 A
10mm 300 A
Field of Application Amperage for RADSOK® Machined Contacts
RTHP / RADSOK® Connectors
starting at page 181
All technical data has been measured in a laboratory environment and can be different during practical usage of the product. Any
product information is for descriptive usage only and not legally binding. In particular, the information does not constitute or provide
any legal guarantees.
210
Technical Information
Tooling
Machined ________________________________________________________________________________________212
Stamped & Formed _______________________________________________________________________________212
Contact Extraction Tool ___________________________________________________________________________212
Contact Extraction Tool Table ______________________________________________________________________213
Contact Extraction Tool Instruction _________________________________________________________________214
Assembly Instructions
Jam Nut Assembly and Installation Instructions ______________________________________________________215
Flange Assembly and Installation Instructions _______________________________________________________216
eco|mate® rm Standard Product Straight Plug and Receptacle Cable Assembly ____________________217
eco|mate® rm Standard Product Straight Plug and Receptacle with End Cap _______________________219
eco|mate® rm Standard Product Right Angle Plug and Receptacle Cable Assembly _________________220
eco|mate® rm High Amperage Straight Plug Cable Assembly ______________________________________ 222
eco|mate® rm High Amperage Straight Plug - Shell Size 12 Cable Assembly _________________________223
eco|mate® rm High Amperage 90° Plug Cable Assembly ___________________________________________224
Technical Data
RADSOK® Product Overview ______________________________________________________________________226
RADSOK® Advantages and Custom Developed Solutions __________________________________________227
RADSOK® Series Rated Current and Working Voltage ______________________________________________228
RADSOK® Series Dynamic Overload Tests at Different Temperatures _________________________________229
eco|mate® rm Standard Product Rated Current and Working Voltage ______________________________230
UL94 + UL1977 Industry Standards __________________________________________________________________231
IP Codes __________________________________________________________________________________________232
Crimp Connection ________________________________________________________________________________233
Composition and Dimensions of Copper Wires ______________________________________________________234
Reduction Values _________________________________________________________________________________235
Voltage Grading of Connectors ___________________________________________________________________ 236
Creepage Distance _______________________________________________________________________________237
Technical Information
eco |mate® rm
Rugged Metal Shielded Connectors
211
Contact Extraction Tool Part Number Description
QRT08R 3.6 mm contacts
QXRT08 3.6 mm contacts
(eco|mate® rm High Amperage)
QXRT125 2.5 mm contacts
QXRT16 #16 contacts
QXRT20 #20 contacts
Contact Extraction Tool
Stamped & Formed
Hand Tool, Stamped & Form
Contact, 16 AWG
MFX-3954
Crimp Die for Stamped & Form Contact
MFX-3957
Hand Tool, Stamped & Form
Contact, 20 AWG
MFX-3958
Hand Crimp Tool for Machine Contacts
MFX-3959
Pneumatic Crimp Tool for
Machined Contacts
MFX-3960
Hand Tool, Stamped & Form
Contact, 2.5 mm
MFX-3962
Tooling
Machined
212
Technical Information
Tooling
Contact Size 16
Extraction Tool QXRT16
Contact Part Number
Male Female
MP14M23F MS14M23F
SP14M1F SS14M1F
MP14M23FG5 MS14M23G5
SP14M1G5 SS14M1G5
SP14M1G10 SS14M1G10
MP14M23FG10 MS14M23G10
SP14M1G15 SS14M1G15
MP14M23FG15 MS14M23G15
MP14M23G30 MS14M23G30
SP14M1G30 SS14M1G30
MP16M23F MS16M23F
SP16M1F SS16M1F
MP16M23G5 MS16M23G5
SP16M1G5 SS16M1G5
SP16M1G10 SS16M1G10
MP16M23G10 MS16M23G10
SP16M1G15 SS16M1G15
MP16M23G15 MS16M23G15
SP16M1G30 SS16M1G30
MP16M23G30 MS16M23G30
Contact Size 16 (con’t)
Extraction Tool QXRT16
Contact Part Number
Male Female
SP20M1F SS20M1F
MP20M23F MS20M23F
SP20M1G5 SS20M1G5
MP20M23G5 MS20M23G5
SP20M1G10 SS20M1G10
MP20M23G10 MS20M23G10
SP20M1G15 SS20M1G15
MP20M23G15 MS20M23G15
SP20M1G30 SS20M1G30
MP20M23G30 MS20M23G30
SP24M1F SS24M1F
MP24M23F MS24M23F
SP24M1G5 SS24M1G5
MP24M23G5 MS24M23G5
MP24M23G10 MS24M23G10
SP24M1G10 SS24M1G10
MP24M23G15 MS24M23G15
SP24M1G15 SS24M1G15
MP24M23G30 MS24M23G30
SP24M1G30 SS24M1G30
Contact
Size
Contact Part Number Extraction
Tool
Male Female
2.5 mm SP12A1T SS12A1T QXRT125
3.6mm
HP10ACS HS10ACS
QRT0BRHP10AHS HS10AHS
HP10ASS HS10ASS
6 mm
HP25BCS HS25BCS
N/AHP25BHS HS25BHS
HP25BSS HS25BSS
8 mm
HP35CSS HS35CSS
N/AHP35CCS HS35CCS
HP35CHS HS35CHS
10 mm
HP50DCS HS50DCS
N/AHP50DHS HS50DHS
HP50DSS HS50DSS
8 MP10A23S MS10A23S N/A
Contact Size 20
Extraction Tool QXRT20
Contact Part Number
Male Female
MP20W23F MS20W23F
SP20W1F SS20W1F
SP20W1G5 SS20W1G5
MP20W23G5 MS20W23G5
SP20W1G10 SS20W1G10
MP20W23G10 MS20W23G10
MP20W23G15 MS20W23G15
SP20W1G15 SS20W1G15
MP20W23G30 MS20W23G30
SP20W1G30 SS20W1G30
MP24W23F MS24W23F
SP24W1F SS24W1F
SP24W1G5 SS24W1G5
MP24W23G5 MS24W23G5
SP24W1G10 SS24W1G10
MP24W23G10 MS24W23G10
MP24W23G15 MS24W23G15
SP24W1G15 SS24W1G15
SP24W1G30 SS24W1G30
MP24W23G30 MS24W23G30
MP28W23F MS28W23F
SP28W1F SS28W1F
SP28W1G5 SS28W1G5
MP28W23G5 MS28W23G5
SP28W1G10 SS28W1G10
MP28W23G10 MS28W23G10
MP28W23G15 MS28W23G15
SP28W1G15 SS28W1G15
SP28W1G30 SS28W1G30
MP28W23G30 MS28W23G30
Contact Extraction Tool Table
213
Contact Extraction Tool Instruction
Tooling
Extraction tool Contacts
Connector
Step 1 Put extraction tool into insert
Step 3 Step 4
Step 2 Push the handle to take out the contacts
214
Technical Information
Jam Nut Assembly and Installation Instructions
Assembly Instructions
1. Remove insulation from wires and terminate contacts
2. Push contacts into connector insert
3. Seat o-ring, install and fasten receptacle in the panel cut-out
4. Tighten jam nut
Panel thickness
max (3.2mm)
Jam Nut
O-ring
A
m
p
h
e
n
Shell Size Jam Nut torque
(Nm) Exterior jam nut
dim. (min) Ø Wire max
(mm) Panel thickness
max (mm)
10 3.4-4.1 22.2 3.2 3.2
12 5.2-5.6 27.0 3.2 3.2
14 6.2-6.8 32.0 3.2 3.2
16 7.9-8.5 33.3 3.2 3.2
18 9.0-9.6 36.5 3.2 3.2
20 10.2-10.7 39.7 3.2 3.2
22 11.3-12.4 42.9 3.2 3.2
24 12.4-13.6 46.0 3.2 3.2
215
Assembly Instructions
Flange Assembly and Installation Instructions
1. Remove insulation from wires and terminate contacts
2. Push contacts into connector insert
3. Install and fasten receptacle in the panel cutout
4. For increased sealing of the system, use optional gasket
Gasket
A
m
p
h
e
Front Assembly
A
m
p
h
e
Gasket
Rear Assembly
3mm max
Receptacle ange
Panel
A
m
p
h
e
n
o
l
Receptacle ange
Panel thickness:
2.5 mm max
A
m
p
h
e
n
o
l
3mm max
Shell
Size
Screw
tightening
torque (Nm)
10 0.30/0.40
12 0.30/0.40
14 0.30/0.40
16 0.30/0.40
18 0.35/0.45
20 0.50/0.60
22 0.55/0.65
24 0.55/0.65
216
Technical Information
eco|mate® rm Straight Plug and Receptacle Cable Assembly
Assembly Instructions
Step 1: Slide parts onto cable
Step 5: Trim braided shield flush to edge of
tie-wrap
Step 7: Attach contacts to wire leads
Step 3: Attach tie-wrap
Step 8: Crimp contacts
Step 6: Strip to conductor
Step 4: Trim tie-wrap
Step 2: Strip jacket
Table 1
Shell
Size L1
(long back shell) L1
(short back shell)
10 25~30 mm 20~25 mm
12 30~35 mm 25~30 mm
14 30~35 mm 25~30 mm
16 35~40 mm 30~35 mm
18 35~40 mm 30~35 mm
Table 2
Contact
Size L2
(stamped) L2
(machined)
8# NA 7.5~8.5 mm
12# 8.2~9.2
mm 8.5~9.5 mm
16# 5.0~5.5
mm 7.5~8.5 mm
20# 5.5~6.0
mm 7.0~8.0 mm
* Make sure exposed shielding is not nickedor cut
Dimensions are for reference only
217
Step 14 Mate receptacle & plug (align the master key)
Step 9: Insert contacts into connector cavities
Step 11: Push shielding clip into backshell
Step 12: Push cable grommet into backshell
Step 13: Tighten metal nut
Step 10: Assemble back shell
eco|mate® rm Straight Plug and Receptacle Cable Assembly (con’t)
Assembly Instructions
Table 3
Size Torque=T1 (N.m)
10 1.5~2.5 N.m
12 2.5~4.0 N.m
14 2.5~4.0 N.m
16 3.0~4.5 N.m
18 3.0~4.5N.m
Table 4
Size Torque=T2 (N.m)
10 2.0~3.0 N.m
12 3.0~5.0 N.m
14 3.5~5.5 N.m
16 4.0~6.0 N.m
18 5.0~8.0 N.m
Assembled Dimensions
Shell
Size Plug with socket match with long
cord grip Plug with socket match
with short cord grip Plug with pin match with
long cord grip Plug with pin match and
short cord grip
10 43.0mm 33.0mm 38.0mm 28.0mm
12 45.0mm 35.0mm 35.0mm 25.0mm
14 45.0mm 35.0mm 35.0mm 25.0mm
16 45.0mm 35.0mm 40.0mm 30.0mm
18 48.0mm 39.0mm 40.0mm 32.0mm
218
Technical Information
eco|mate® rm Straight Plug and Receptacle with End Cap
Assembly Instructions
Step 1: Strip insulator
Step 3: Crimp contacts
Step 4: Insert contacts into connector cavities
Step 5: Mate plug and receptacle (align the master key)
Step 2: Attach contacts to wire leads
Table 2
Contact
Size L2
(stamped) L2
(machined)
8# NA 7.5~8.5 mm
12# 8.2~9.2
mm 8.5~9.5 mm
16# 5.0~5.5
mm 7.5~8.5 mm
20# 5.5~6.0
mm 7.0~8.0 mm
219
eco|mate® rm Right Angle Plug and Receptacle Cable Assembly
Assembly Instructions
Step 8: Crimp contacts
Step 6: Strip to conductor
Step 4: Trim tie-wrap
Step 2: Strip jacketStep 1: Slide parts onto cable
Step 5: Trim braided shield ush to edge of tie-wrap
Step 7: Attach contacts to wire leads
Step 3: Attach tie-wrap
Table 5
Size L5 (90° cord grip)
10 NA
12 60~65 mm
14 60~65 mm
16 65~70 mm
18 NA
Table 2
Contact
Size L2
(stamped) L2
(machined)
8# NA 7.5~8.5 mm
12# 8.2~9.2
mm 8.5~9.5 mm
16# 5.0~5.5
mm 7.5~8.5 mm
20# 5.5~6.0
mm 7.0~8.0 mm
* Make sure exposed
shielding is not
nicked or cut
Dimensions are for reference only
220
Technical Information
Step 10: Assemble back shell
Step 9: Insert contacts into connector cavities
eco|mate® rm Right Angle Plug and Receptacle Cable Assembly
(cont.)
Assembly Instructions
Step 11: Push shielding clip into backshell
Step 13: Tighen metal nut
Step 12 Push cable grommet into backshell
Step 14: Male receptacle & plug (align the master key)
Table 4
Size Torque= T2 (N.m)
10 2.0-3.0 N.m
12 3.0-5.0 N.m
14 3.5-5.5 N.m
16 4.0-6.0 N.m
18 5.0-8.0 N.m
221
eco|mate® rm High Amperage Straight Plug Cable Assembly
Assembly Instructions
Step 1: Slide components onto cable
Step 3: Fold braided shielding over jacket
Step 5: Strip to conductor
Step 9: Attach and tighten backshell as shown
Step 6: Slide onto conductor and crimp
Step 4: Wrap foil over braided shielding
Step 2: Strip jacket
Data Chart
Instruction Shell 14 Shell 16 Shell 20
Dimension “A” 25 mm 25 mm 30 mm
SW “B” 24 mm 28 mm 32 mm
SW “C” 24.5 mm 29 mm 32.5 mm
Step 7: Slide plug onto barrel
Step 8: Attach and tighten plug as shown
* Make sure exposed shielding is not nicked or cut
222
Technical Information
RTHP SERIES™ Straight Plug - Shell Size 12 Cable Assembly
Assembly Instructions
Step1: Slide parts onto cable
Step 3: Cut tie wrap to remove excessive material.
Trim shielding ush to edge of tie wrap
Step 5: Crimp terminal to conductor Step 6: Slide plug onto crimped terminal assembly
Step 4: Strip to conductor
Step 2: Strip jacket to braided shielding and attach tie wrap
Step 7: Tighten plug to backhell. Perform pull test to
assure correct contact assembly Step 8: Insert shielding clip and cable grommet. Attach
and tighten back-nut to backshelll
SW20
Torque value 3-5 N.M
223
eco|mate® rm High Amperage 90° Plug Cable Assembly
Assembly Instructions
Step 2: Attach tie wrap and trim braiding ush to edge of tie-wrap
Step 4: Push cable into backshell. Slide components onto cable
Step 6: Slide heat shrink tubing onto cable
Step 5: Trim jacket to conductor
Step 3: Trim tie-wrap
Step 1: Strip jacket to metal braiding
224
Technical Information
eco|mate® rm High Amperage 90° Plug Cable Assembly (cont.)
Step 8: Heat shrink tube over crimp
Step 10: Attach plug to backshell
Step 9:
Step 7: Crimp barrel to conductor
Assembly Instructions
Step 11: Insert shielding clip and cable grommet.
Tighten connector to backshell as shown Step 12: Attach cable-nut to backshell and tighten as shown
Data Chart
Instruction Shell 12 Shell 14 Shell 16
Dimension “A” 10 mm 15 mm 15 mm
SW “B” 22 mm 25 mm 28 mm
SW “C” 22 mm 22 mm 25 mm
SW “B”
Torque value 2-3.5N.M
225
RADSOK® Product Overview
Technical Data
RADSOK® Contact (Max. current carrying capacity meet DIN EN 60512 specication.)
Shell size Applicable Cable Contact Plating current (AC)
temperature
12 (3.6mm) 10mm², 16mm² Silver Plated 65A (10mm²), 86A (16mm²)
14 (6.0mm) 25mm² Silver Plated 120A (25mm²)
16 (8.0mm) 35mm², 50mm² Silver Plated 130A (35mm²), 180A (50mm²)
20 (10.0mm) 50mm², 70mm², 95mm² Silver Plated 180A (50mm²), 250A (70mm²), 300A (95mm²)
Note: The given electrical values correspond to a single contact. With the addition of a housing, an increased number of poles or other modications,
the values must be adjusted downwards accordingly.
The RADSOK® Design
• Socket cylinder within female contact has several equally spaced longitudinal beams twisted into
a hyperbolic shape
• As a male pin is inserted, axial members in the female half deect, imparting high current ow
across the connection with minimal voltage loss
• The hyperbolic, stamped grid conguration ensures a large, coaxial, face-to-face surface area
engagement
• Ideal for crimp termination applications requiring repeated mating cycles and high current with a
low multi-volt drop
RADSOK® technology is based upon a stamped and formed
at grid, uniquely twisted into a hyperbolic geometry to
provide robust, high density contact to the mating pin
contact. Most pin and socket technologies rely on spring
(beam element) properties of the contact elements, which
tend to weaken over time. Unlike most other pin and socket
solutions, the RADSOK®contact also utilizes the tensile
strength properties of the at, high conductivity alloy grid.
This provides the high normal forces required for conductivity
while also providing a large conductive surface area.
Correspondingly low voltage drop and low temperature rise
are also achieved while maintaining low insertion forces.
226
Technical Information
RADSOK® Technology Advantages
• High Reliability - Unique design and construction technology create an electrical contact
interface that exceeds typical interconnect requirements.
• Low Contact Engagement/Separation Forces - The hyperbolic lamella socket contact
construction distributes normal forces over a high percentage of the mating pin surface.
This creates a smooth, even engagement effort. This force distribution also contributes to
excellent performance in vibration applications with resistance to typical fretting corrosion.
• Low Contact Resistance - The large interface area between the socket lamella and pin
surface result in very low contact resistance, enabling the RADSOK® contacts high current
ratings compared to traditional power contact designs.
• High Mating Cycle Durability - RADSOK® contacts with typical silver plating nishes have
demonstrated survival of 20,000 mating cycles. Specialized plating and contact lubricants
can extend cycle life to 200,000 matings or higher. Even with continuous exposure to harsh
environmental abuse, RADSOK® contacts have been tested to maintain low contact
resistance beyond 10,000 mating cycles.
Standard and Custom-Developed Solutions
• In addition to the various standard sizes of RADSOK® components, custom-developed
solutions are also available. Amphenol has the global design, engineering and
manufacturing resources to provide RADSOK® sockets pressed into basbars, crimped to
cables, assembled into connectors, assembled into customer or Amphenol designed
specialized electrical devices, or as stand-alone components. Amphenol also
manufactures a full compliment of mating pin contacts for any application.
• Steady-state current capacities for RADSOK® products range from 50 amps to over
1000 amps.
• Amphenol connectors with RADSOK® contacts are offered with a variety of positive locking
features (HiLok® and SurLok® ) that insure and maintain fully mated connections.
• Sealing (Sealtac™) and high voltage hot break options are available within the RADSOK®
itself or within a very wide range of IP rated connector housings to provide environmental
protection to the contact area.
RADSOK® Advantages and Custom Developed Solutions
Technical Data
227
RADSOK® Series Rated Current and Working Voltage
Technical Data
Contact Current Carrying Capacity
Derating 3.6mm Derating 6mm
Derating 8mm Derating 10mm
228
Technical Information
RADSOK® Series Dynamic Overload Tests at Different Temperatures
Technical Data
8mm RADSOK®
6mm RADSOK®
229
eco|mate® rm Rated Current and Working Voltage
Technical Data
Current Carrying Capacity
230
Technical Information
UL94 + UL1977 Industry Standards
There are two main standards for electrical conductors: UL94 and UL1977.
UL94 - The standard for safety of ammability of plastic material for parts in devices
and appliance testing.
The eco|mate® rm series has been rated at V-0
The Test Program: Specimen is orientated in a vertical position and is subjected to a
ame for ten seconds, then removed. Once the specimen has stopped burning, the
ame is then reapplied for another ten seconds and then removed.
V-0 Vertical Burning
• Specimen self extinguishes within 10 seconds after each test ame application
• Specimen must not drip aming particles that ignite the cotton indicator
UL1977 - The standard for connectors used in data, signal, control and power
applications-component.
ECBT2 - A standard of UL1977 covering single and multi-pole connectors. Intended for
factory assembly, includes devices that are incomplete in certain constructional
features or are restricted in performance capabilities and are intended for use as
components of complete equipment submitted for investigation rather than for
direct separate installation in the eld. The nal acceptance of the component is
dependent upon its installation and use in complete equipment submitted to UL.
Technical Data
231
IP Codes
1st
digit Brief description Denition 2nd
digit Brief Description Denition
0Non-protected -- 0 Non-protected --
1Protected against access to
hazardous parts with the back
of a hand. Protected against
solid foreign objects
of ≥50mm Ø.
The probe, sphere of 50mm Ø,
shall not fully penetrate and
shall have adequate clearance
from hazardous parts.
1 Protected against
vertically falling water
drops
Vertically falling drops shall have no
harmful effects.
2Protected against access to
hazardous parts with a nger.
Protected against solid foreign
objects of ≥12,5mm Ø.
The jointed test nger of 12mm
Ø, 80mm length, shall have
adequate clearance from
hazardous parts. The probe,
sphere of 12,5mm Ø, shall not
fully penetrate.
2 Protected against
vertically falling water
drops when enclosure
tilted up to 15°
Vertically falling drops shall have no
harmful effects when the enclosure is
tilted at any angel up to 15° .
3Protected against access
to hazardous parts with a
tool. Protected against solid
foreign objects of ≥2,5mm Ø.
The probe of 2,5mm Ø shall not
penetrate at all. 3 Protected against
spraying water Water sprayed at any angle up to
60° shall have no harmful effects.
4Protected against access to
hazardous parts with a wire. The probe of 1mm Ø shall not
penetrate at all. 4 Protected against
splashing water Water splashed against the
enclosure from any direction shall
have no harmful effects.
5Protected against access to
hazardous parts with a wire.
Dust-protected.
The probe of 1mm Ø shall not
penetrate. Intrusion of dust is not
totally prevented, but dust shall
not penetrate in a quantity
to interfere with satisfactory
operation of the device or to
impair safety.
5 Protected against
water jets Water projected in jets against the
enclosure from any direction shall
have no harmful effects.
6Protected against access to
hazardous parts with a wire
Dust-tight.
The probe of 1mm Ø shall not
penetrate. No intrusion of dust. 6 Protected against
powerful water jets Water projected in powerful
jets against the enclosure from any
direction shall have no harmful
effects.
7 Protected against the
effects of temporary
immersion in water
Intrusion of water in quantities
causing harmful effects shall not
be possible when the enclosure is
temporarily immersed in water for
30 min. in 1m depth.
8 Protected against the
effects of continuous
immersion in water
Intrusion of water in quantities
causing harmful effects shall not
be possible when the enclosure
is continuously immersed in water
under conditions which shall be
agreed between manufacturer and
user but which are more severe than
for numeral 7.
9K1) Protected against
water during high
pressure/steam jet
cleaning
Water projected in powerful
jets with high pressure and heat
against the enclosure from any
direction shall have no harmful
effects.
Technical Data
Electrical connector devices have to be
protected for safety reasons from outside
inuences like dust, foreign objects, direct
contact, moisture and water. This protection
is provided on industrial connectors by the
housing latching devices and sealed cable
entries. The degree of protection depends on
the type of intended use. The standard IEC
60529 and/or DIN EN 60529 has specied the
degree of protection and divided them into
several classes. The attached charts gives an
overview of all of the protection degrees.
I P 6 7 SECOND NUMBER
water protection
FIRST NUMBER
foreign bodies protection
CODE LETTERS
international protection
232
Technical Information
Technical Data
Crimp Connection
Crimp connection Chart 2: Tensile strength for crimp connections
A crimp connection is a non-detachable electrical
connection between a wire and a crimp contact
produced with the crimp technology. Precise
crimping dies are matched to the crimp barrel and
the wire size and a dened deformation results in
a reliable electrical connection. There are open
barrels (stamped contacts) and closed crimp
barrels (turned contacts).
The main advantages of crimp connections are:
• Efcient termination of contacts.
• Reproducible electrical and mechanical gures
by a constant crimp quality.
The requirements for crimp connections are dened
in DIN EN 60352-2.
An important point for the quality of a crimp
connection is the achieved tensile strength of
the termination. Measuring the tensile strength is
a practical means for quality control purposes.
Chart 2 below shows the required minimum tensile
strength for open and closed barrels according to
the wire size.
Wire size Tensile strength
mm2AWG 1) N
0.05 30 6
0.08 28 11
0.12 26 15
0.14 18
0.22 24 28
0.25 32
0.32 22 40
0.5 20 60
0.75 85
0.82 18 90
1.0 108
1.3 16 135
1.5 150
2.1 14 200
2.5 230
3.3 12 275
4.0 310
5.3 10 355
6.0 360
8.4 8 370
10.0 380
Cross reference AWG - mm2
The chart below allows a cross reference between American Wire Gauge (AWG) and metric wire sizes (mm2).
Chart 3
AWG Wire composition Leiter-Ø Wire size AWG Wire composition Leiter-Ø Wire size
30 1 x 0.25 0.25 mm 0.05 mm2 20 1 x 0.81 0.81 mm 0.52 mm2
7 x 0.10 0.36 mm 0.06 mm2 7 x 0.32 0.97 mm 0.56 mm2
28 1 x 0.32 0.32 mm 0.08 mm2 19 x 0.20 1.02 mm 0.62 mm2
7 x 0.13 0.38 mm 0.09 mm2 18 1 x 1.02 1.02 mm 0.79 mm2
26 1 x 0.40 0.40 mm 0.13 mm2 19 x 0.25 1.27 mm 0.96 mm2
7 x 0.16 0.48 mm 0.14 mm2 16 19 x 0.29 1.44 mm 1.23 mm2
19 x 0.10 0.51 mm 0.15 mm2 14 19 x 0.36 1.80 mm 1.95 mm2
24 1 x 0.51 0.51 mm 0.21 mm2 12 19 x 0.46 2.29 mm 3.09 mm2
7 x 0.20 0.61 mm 0.23 mm2 10 37 x 0.40 3.10 mm 4.60 mm2
19 x 0.13 0.64 mm 0.24 mm2 8 133 x 0.29 4.0 mm 8.80 mm2
22 1 x 0.64 0.64 mm 0.33 mm2 6 133 x 0.36 5.5 mm
7 x 0.25 0.76 mm 0.36 mm2
19 x 0.16 0.81 mm 0.38 mm2
It has to be noted that wires of the same AWG number but with different composition have slightly different mm2.
233
Technical Data
Composition and Dimensions of Copper Wires
Chart 4: Composition and Dimensions of Copper Wires
Wire Size Wire Composition Wire diameter
0.09 mm212 x 0.10 0.48 mm
0.14 mm218 x 0.10 0.50 mm
0.25 mm214 x 0.15 0.70 mm
0.34 mm27 x 0.25 0.78 mm
0.5 mm216 x 0.20 1.0 mm
0.75 mm224 x 0.20 1.2 mm
1.0 mm232 x 0.20 1.4 mm
1.5 mm230 x 0.25 1.6 mm
2.5 mm235 x 0.30 2.2 mm
4.0 mm256 x 0.30 2.8 mm
6.0 mm219 x 0.64 3.4 mm
10 mm219 x 0.80 4.3 mm
Current carrying capacity
The current carrying capacity of a connector is shown by a derating
curve. The curve shows the currents that the connector can carry
continuously and simultaneously through all its contacts. The curve is
determined by testing following the standard DIN EN 60512. The upper
temperature is limited by the contact and insulation material used . The
sum of the ambient temperature and the temperature created by the
current ow may not exceed the upper temperature. This means that
the current carrying capacity has no xed value but decreases with
increasing ambient temperatures.
As a general example it can be said that a given connector which
can carry 16A through all its contacts at 40°C ambient temperature
can carry less, e.g. 12A, at an ambient temperature of 80°C.
On the other hand it is often the case that not all contacts carry the
whole rated current, which means that some single contacts may
carry a higher current than that according to the derating curve.
These currents have to be dened by testing.
Current carrying capacity
Ambient temperature (°C)
Upper temperature limited
Chart 5: Current carrying capacity of copper wires in (A)
Installation type Wire size (mm2) 0.25 0.34 0.5 0.75 1 1.5 2.5 4 6 10
B1 Wires in conduits and installation channels
- - - 7.6 10.4 13.5 18.3 25 32 44
B2 Cables and conductors in conduits or installation channels
- - - - 9.6 12 16.5 23 29 40
C Cables and conductors along walls
4.0 5.0 7.1 9.1 11.7 15.2 21 28 36 50
E Cables and conductors on plank
4.0 5.0 7.1 9.1 11.5 16.1 22 30 37 52
Description according to DIN EN 60204 for PVC insulated copper wires
with a working temperature of +40C. For other requirements, such as for other temperatures, mountings, or wires corresponding
correction factors are used (see next page).
234
Technical Information
Technical Data
Reduction Values
Reduction values Chart 6
The values in chart 5 are based on an ambient temperature of 40
°C.
For other ambient temperatures the values have to be adjusted
using the correction values of chart 6 below.
For installations with many cables and conductors under load
the current carrying capacity is reduced according to the two
following charts 7 and 8.
Ambient temperature (°C) Correction value
30 1.15
35 1.03
40 1.00
45 0.91
50 0.82
55 0.71
60 0.58
Chart 7: Reduction values for accumulated conductors
Installation type Number of cables and conductors / pairs under load
2469
Three phase cable and conductor
B1 and B2 0.80 0.85 0.87 0.86
C 0.65 0.75 0.78 0.76
E-one row 0.57 0.72 0.75 0.72
E-multi row 0.50 0.70 0.73 0.88
DC conductor (pair), independent of installation type 1.0 0.76 0.64 0.43
Chart 8: Reduction values for multicore cable and conductors up to 10mm2
Number of conductors (pairs) under load AC (conductor > 1 mm2) DC (Pairs 0,2 to 0,75 mm2)
5 0.75 0.52
7 0.65 0.45
10 0.55 0.39
24 0.40 0.27
Conductors of control circuits generally do not need a reduction.
Impulse current carrying capacity
A surge can happen to a connector and its contacts by an
impulse current, e.g. through a short circuit in the system or by
switching operations. The short-timed high current heat cannot
be transferred outside fast enough so the contacts
are stressed by the high temperature which in the worst case
can lead to a local weld. The robust design of our connectors
prevents most damage by impulse currents.
Voltage grading of connectors
General
Clearances and creepage distances are the base for voltage
grading of connectors. Valuation and dimensioning of
clearances and creepage distances have changed since the
introduction of insulation coordination.
Insulation coordination comprises the selection of the electrical
insulation performances of the equipment, taking into account
the expected use and its environment.
The following standards apply for this:
IEC 60664-1/10.92
Insulation coordination for equipment within
low-voltage systems
DIN VDE 0110-1/4.97
Isolationskoordination für elektrische Betriebsmittel
in Niederspannungsanlagen
235
Technical Data
Voltage Grading of Connectors
Clearances
The clearance is the shortest distance in air between two
conductive parts. An important point for the dimensioning
of clearances is the determination of the overvoltage
category. The above standard species the possible
overvoltages into the four following categories:
Overvoltage category I
Equipment intended for the use in appliances or parts of
installations in which no overvoltage can occur.
Examples are low-voltage equipment.
Overvoltage category II
Equipment intended for the use in installations or parts
of it in which lightning overvoltages do not need to be
considered, but switching overvoltages generated by the
equipment do need to be considered.
Examples are household appliances.
Once the overvoltage category has been dened the
rated impulse withstand voltage can be selected for the
equipment based on the nominal voltage of the supply
system and the overvoltage category using chart 9
below:
Overvoltage category III
Equipment intended for the use in installations or parts
of it in which lightning overvoltages do not need to be
considered, however switching overvoltages generated
by the equipment, and for cases where the reliability and
the availability of the equipment or its dependent circuits
are subject to special requirements.
Examples are protecting means, switches and sockets.
Overvoltage category IV
Equipment intended for the use in installations or parts of it
in which lightning overvoltage has to be considered.
Examples are electricity meters, overcurrent protection
switches.
Chart 9
Nominal voltage of the supply system in V
(based on IEC 60038) Rated impulse voltage in kV for overvoltage category
Three phase systems IV III II I
230/400 277/480 6 4 2,5 1,5
400/690 8 6 4 2,5
1000 12 8 6 4
After the rated impulse withstand voltage has been
selected the pollution degree must be dened taking the
expected pollution around the equipment into account.
The following four degrees of pollution are established:
After the rated impulse withstand voltage has been
selected the pollution degree must be dened taking the
expected pollution around the equipment into account.
The following four degrees of pollution are established:
Pollution degree 1
No pollution or only dry, non-conductive pollution occurs.
The pollution has no inuence.
Pollution degree 2
Only non-conductive pollution occurs except
occasionally a temporary conductivity caused by
condensation is to be expected.
Pollution degree 3
Conductive pollution occurs or dry non-conductive
pollution occurs which becomes conductive due to
condensation which is to be expected.
Pollution degree 4
The pollution generates persistent conductivity caused by
conductive dust or by rain or snow.
It has to be noted that for a connector or plug and
socket devise with a degree of protection of min.
IP 54 the parts inside the enclosure may be
dimensioned for a lower pollution degree. This also applies
to mated connectors which enclosure is ensured through
the connector housing and which may only be
disengaged for test and maintenance purposes.
When impulse withstand voltage and the pollution degree
are dened the minimum clearances can be selected
from chart 10.
236
Technical Information
Technical Data
Voltage Grading of Connectors (cont.)
Chart 10
Impulse
withstand
voltage
in kV
Minimum clearances in air in mm up to 2000 m above sea level
Case A (non homogeneous eld) Case B (homogeneous eld)
Pollution degree Pollution degree
1 2 3 4 1 2 3 4
0.33 0.01 0.2 0.8 1.6 0.01 0.2 0.8 1.6
0.40 0.02 0.02
0.50 0.04 0.04
0.60 0.06 0.06
0.80 0.10 0.1
1.0 0.15 0.15
1.2 0.25 0.25 0.2
1.5 0.5 0.5 0.3 0.3
2.0 1.0 1.0 1.0 0.45 0.45
2.5 1.5 1.5 1.5 0.6 0.6
3.0 2 2 2 2 0.8 0.8
4.0 3 3 3 3 1.2 1,2 1.2
5.0 4 4 4 4 1.5 1.5 1.5
6.0 5.5 5.5 5.5 5.5 2 2 2 2
8.0 8 8 8 8 3 3 3 3
10 11 11 11 11 3.5 3.5 3.5 3.5
12 14 14 14 14 4.5 4.5 4.5 4.5
15 18 18 18 18 5.5 5.5 5.5 5.5
20 25 25 25 25 8 8 8 8
25 33 33 33 33 10 10 10 10
30 40 40 40 40 12.5 12.5 12.5 12,5
40 60 60 60 60 17 17 17 17
50 75 75 75 75 22 22 22 22
60 90 90 90 90 27 27 27 27
80 130 130 130 130 35 35 35 35
100 170 170 170 170 45 45 45 45
When dening the minimum clearances for connectors generally the values
of the inhomogeneous eld can be chosen or the required clearance has to
be dened by a voltage test.
Creepage distances
The creepage distance is the shortest distance along
the surface of the insulating material between two
conductive parts.
For the dimensioning of the creepage distance the
following factors are taken into account: the rated
voltage, the pollution degree and the tracking formation
of the insulating material.
The materials are separated into four groups according to
their CTI values (Comparative Tracking Index):
Material group I 600 ≤ CTI
Material group II 400 ≤ CTI < 600
Material group IIIa 175 ≤ CTI < 400
Material group IIIb 100 ≤ CTI < 175
The minimum creepage distances can be selected from chart 11 .
237
Technical Data
Creepage Distance
Chart 11
U-eff
Rated
voltage
U in V
Min. creepage distance in mm
Printed
circuits Other devices
Pollution
degree Pollution degree Pollution degree Pollution degree
1 2 1 2 3 4
Material group Material group Material group
2) 3) 2) I II IIIa IIIb I II IIIa IIIb I II IIIa IIIb
10 0.025 0.04 0.08 0.4 0.4 0.4 1 1 1 1.6 1.6 1.6
12.5 0.025 0.04 0.09 0.42 0.42 0.42 1.05 1.05 1.05 1.6 1.6 1.6
16 0.025 0.04 0.1 0.45 0.45 0.45 1.1 1.1 1,1 1.6 1.6 1.6
20 0,025 0.04 0.11 0.48 0.48 0.48 1.2 1.2 1.2 1.6 1.6 1,6
25 0,025 0.04 0.125 0.5 0.5 0.5 1.25 1.25 1.25 1.7 1.7 1.7
32 0.025 0.04 0.14 0.53 0.53 0.53 1.3 1.3 1.3 1.8 1.8 1.8
40 0.025 0.04 0.16 0.56 0.8 1.1 1.4 1.6 1.8 1.9 2.4 3
50 0.025 0.04 0.18 0.6 0.85 1.2 1.5 1.7 1.9 2 2.5 3.2
63 0.04 0.063 0.2 0.63 0.9 1.25 1,6 1.8 2 2.1 2.6 3.4
80 0.063 0.1 0.22 0.67 0.95 1.3 1.7 1.9 2.1 2.2 2.8 3.6
100 0.1 0.16 0.25 0.71 1 1.4 1.8 2 2.2 2.4 3.0 3.8
125 0.16 0.25 0.28 0.75 1.05 1.5 1.9 2.1 2.4 2.5 3.2 4
160 0.25 0.4 0.32 0.8 1.1 1.6 2 2.2 2.5 3.2 4 5
200 0.4 0.63 0.42 1 1.4 2 2.5 2.8 3.2 4 5 6.3
250 0.56 1 0.56 1.25 1.8 2.5 3.2 3.6 4 5 6.3 8
320 0.75 1.6 0.75 1.6 2.2 3.2 4 4.5 5 6.3 8 10
400 1 2 1 2 2.8 4 5 5.6 6.3 8 10 12.5
500 1.3 2.5 1.3 2.5 3.6 5 6.3 7.1 8.0 10 12.5 16
630 1.8 3.2 1.8 3.2 4.5 6.3 8 9 10 12.5 16 20
800 2.4 4 2.4 4 5.6 8 10 11 12.5 16 20 25
1000 3.2 5 3.2 5 7.1 10 12.5 14 16 20 25 32
1250 4.2 6.3 9 12.5 16 18 20 25 32 40
1600 5.6 8 11 16 20 22 25 32 40 50
2000 7.5 10 14 20 25 28 32 40 50 63
2500 10 12.5 18 25 32 36 40 50 63 80
3200 12.5 16 22 32 40 45 50 63 80 100
4000 16 20 28 40 50 56 63 80 100 125
5000 20 25 36 50 63 71 80 100 125 160
6300 25 32 45 63 80 90 100 125 160 200
8000 32 40 56 80 100 110 125 160 200 250
10000 40 50 71 100 125 140 160 200 250 320
Connectors in this catalogue are allocated to xed rated voltages which apply to the machine building industry. In case of other
applications the above chart can be used to determine other rated voltages.
238
Appendix
Appendix
Glossary of Terms
American Wire Gauge (AWG)
System of numerical designations for wire sizes, based
on specied ranges of cross-sectional areas.
Starts with 4/0 (000) at the largest size, going to 3/0, 2/0,
1/0, 1, 2, and up to 40 and beyond for the smallest size.
A step of one AWG number corresponds to a reduction
of cross-sectional area of appr. 20 %.
Attenuation
A reduction of power. Occurs naturally when waves
travel through lines, wave guides, or media such as air
or water. Is produced additionally by imperfections in
electrical or optical connections (attenuation in bre
optics), e. g. contact resistance, mismatch, etc.
Bulkhead connector
Connector designed to be inserted into a panel cutout
from the rear of the panel, thus forming part of the
barrier between two spaces. Back-mounted.
Clearance
The shortest distance in air between two conductive
parts, see IEC 60664.
Climatic stability
General term describing the behavior of components
under various climatic conditions, e. g. high and
low temperatures, tropical climate, high humidity,
moist heat, fungus, atmospheric conditions (industial
atmosphere), reduced air pressure, etc. Climatic
conditions for test purposes are explained in IEC 60068,
DIN 46 040.
Connector
A component which terminates conductors for the
purpose of providing connection and disconnection to
a suitable mating component which shall not be
engaged or disengaged when live. Depending on the
fastening to a cabinet, panel, rack etc. or a cable, they
are classied as xed or free connectors. A connector
comprises one or more contacts and a housing which
may have a separate connector insert and a separate
outer housing or shell.
Connector housing
The part of a connector into which the insert and the
contacts are assembled. It may function as part of the
locking mechanism.
Connector insert
An insulating element designed to support and position
contacts in a connector housing.
In connectors electromagnetic interference is
prevented by shielding. Shielded connectors normally
provide means to connect the screens of attached
cables.
Connector life
The number of mating cycles prior to abrasion of the
conductive contact surface and which does not result
in a signicant rise of the contact resistance. Tests
according to test 9a of ICE 60512-5 / DIN EN 60512 Part
5.
Contact
The conductive element in a connector which mates
with a corresponding element to provide an electrical
path.
Contact resistance
The electrical resistance of a mated set of contacts
under specied conditions. Tested according to tests
2a, 2b, 2c, of IEC 60 512 -2/ DIN EN 60 512-2.
Contact size
The designation used to differentiate one contact from
another. It may be denoted by one of the following
numbering systems:
Creepage distance
The shortest distance along the surface of the insulating
material between two conductive parts. The longer the
distance, the less the risk of arc damage or tracking.
Minimum creepage distances are specied according
to the rated voltage and the applicable pollution
degree and Comperative Tracking Index.
Crimped connection
A solderless connection made by crimping. IEC 60352-2
/ DIN IEC 60352 Part 2.
Derating curve
The method for determining derating is specied
in IEC 60 512-3. Here the combination of ambient
temperature (Tu) and the current (J) leading to the
same maximum allowable temperature (Tb) at the
hottest point of the connector are plotted.
DIN
Deutsches Institut für Normung. A German standards
organization.
Electromagnetic interference (EMI)
General term describing the undesirable effects of the
immission or emission of radio frequency elds.
Funnel entry (restricted entry C146 D series)
Flared or widened entrance to a conductor barrel
permitting easier insertion of the conductor.
Insertion or withdrawal force
The force required to fully insert or withdraw a set of
mated connectors without the effect of coupling,
locking or similar devices. The insertion force is usually
greater than the withdrawal force.
239
Appendix
Connector Glossary
Insulation grip
The area of a crimp contact that has been reshaped
around the insulation of the conductor by compression
during the crimping operation.
Insulation resistance
The resistance of the insulation between two
conductive elements, in particular, the resistance
between two contacts or between a contact and a
metallic housing or shield. Tested according to test 3a
of IEC 60512-2 / DIN IEC 60512 Part 2.
Intermateable
Two connectors are intermateable when they
are capable of being connected electrically and
mechanically but without regard to their performance
and intermountability.
Locator
In a crimping tool the device used for positioning a
crimp contact or terminal end.
Locking lever
A mechanical locking device operated by actuating
a lever, designed to hold two mated connectors
together. Typically the lever can only be fully locked if
the two connectors are correctly mated.
Mating cycle
One mating cycle comprises one insertion and one
withdrawal operation. Term used in the denition of
connector life.
Material group
Classication of insulation materials according to their
CTI values (CTI = Comperative Tracking Index)
Overvoltage category
A numeral dening a transient overvoltage condition.
Overvoltage categories I, II, III and IV are used.
Connector with braking capacity (CBC)
A component which may be engaged or disengaged
in normal use, when live or under load. Note: In
the sense of this document the term - live- is used if
contacts are under voltage not necessarily with a
current owing across the contacts. The term - load - is
used if a current is owing across the contacts.
Rated current
A current value assigned by the manufacturer which
the connector or PSD can carry continuously (without
interruption) and simultaneously through all its contacts
wired with the largest conductor preferrably at an
ambient temperature of 40 °C without the upper
temperature being exceeded.
Shield, shielding
Shielding of internal or external electric elds by means
of a plane with a uniform electric potential, formed by
metal shells or metallic layers on the inside or outside
of plastic shells. The shield is normally connected to the
shielding braid of the cable and/or chassis ground.
Terminal block
An assembly of terminals in a housing or body of
insulating material to facilitate interconnection
between multiple conductors. Also called terminal strip
or barrier blocks if the terminals are separated by an
insulation barrier.
Wire range
The range of wire cross sections which is compatible
with the dimensions the terminals of the contact
(wire barrel). The wire range is expressed in mm2 or in
AWG numbers.
240
Appendix
Appendix
108039110 33,41,75
108039112 25,51,83,
91,115
108039114 61,123,131,
171
108039116 69,107,139,
155
108039118 101,147
108039120 163
108039122 174
CA401259 61,101,107,
171
CA401659 25,33,41,51,
83,91,107,139,
147,163,171,174
CA402059 41,75,115,
123,131,155
HP10ACS 210,214
HP25BCS 183,210
HP35CCS 187,210
HP50CCS 187,210
HP50DCS 191,210
HP70DCS 191,210
HP95DCS 191,210
HPAHS 179,210
HPASS 210
HPBHS 183,210
HPBSS 183,210
HPCHS 187,210
HPCSS 187,210
HPDHS 191,210
HPDSS 191,210
HS10ACS 210,214
HS25BCS 183,210
HS25CCS 187,210
HS25DCS 191,210
HS35CCS 187,210
HS35DCS 191,210
HS50CCS 187,210
HS50DCS 191,210
HS70DCS 191,210
HS95DCS 191,210
HSAHS 210
HSASS 210
HSBHS 210
HSBSS 210
HSCHS 210
HSCSS 210
HSDHS 210
HSDSS 210
MFX-3954 27,34,45,53
85,93,109,125,
141,149,165,177,212
MFX-3957 27,34,45,53
77,85,93,109,
117,125,133,141,
149,157,165,173,
177,212
MFX-3958 45,77,117,
133,157,173,212
MFX-3959 26,35,43
52,76,84,92,108,
116,124,132,140,
148,156,164,172,176,212
MFX-3960 26,35,43,52,
76,84,92,108,
116,124,132,140,
148,156,164,172,
176,212
MFX-3962 53,60,100,
109,212
MP10A23S 68,207
MP10B12E05F 205
MP10B12E05G5 205
MP10B12E05G10 205
MP10B12E05G15 205
MP10B12E05G30 205
MP10B12E08F 205
MP10B12E08G5 205
MP10B12E08G10 205
MP10B12E08G15 205
MP10B12E08G30 205
MP14M23F 26,34,42,
52,84,92,
108,124,140,
148,164,176,207
MP14M23G5 26,34,42
52,84,92,
108,124,140,
148,164,176,207
MP14M23G10 26,34,42,
52,84,92,
108,124,140,
148,164,176,207
MP14M23G15 26,34,42,
52,84,92,
108,124,140,
148,164,176,207
MP14M23G30 26,34,42,
52,84,92,
108,124,140,
148,164,176,207
MP16M12E06F 204
MP16M12E06G5 204
MP16M12E06G10 204
MP16M12E06G15 204
MP16M12E06G30 204
MP16M12E09F 204
MP16M12E09G5 205
MP16M12E09G10 205
MP16M12E09G15 205
MP16M12E09G30 205
MP16M23F 26,34,42,
52,84,92,
108,124,140,
148,164,176,207
MP16M23G5 26,34,42,
52,84,92,
108,124,140,
148,164,176,207
MP16M23G10 26,34,42,
52,84,92,
108,124,140,
148,164,176,207
MP16M23G15 26,34,42,
52,84,92,
108,124,140,
148,164,176,207
MP16M23G30 26,34,42,
52,84,92,
108,124,140,
148,164,176,207
MP24M23F 26,34,42,52,
84,92,108,124,
140,148,164,176,208
MP24M23G5 26,34,42,52,
84,92,108,
124,140,148,
164,176,208
MP24M23G10 26,34,42,52,
84,92,108,
124,140,148,
164,176,208
MP24M23G15 26,34,42,52,
84,92,108,
124,140,148,
164,176,208
MP24M23G30 26,34,42,52,
84,92,108,
124,140,148,
164,176,208
MP24W23F 43,76,116,132,
156,172,208
MP24W23G5 43,76,116,
132,156,172,208
MP24W23G10 43,76,116,
132,156,172,208
MP24W23G15 43,76,116,
132,156,172,208
MP24W23G30 43,76,116,
132,156,172,208
MP28W23F 43,76,116,
132,156,172,208
MP28W23G5 43,76,116,
132,156,172,208
MP28W23G10 43,76,116,
132,156,172,208
MP28W23G15 43,76,116,
132,156,172,208
MP28W23G30 43,76,116,
132,156,172,208
MS6ARS8S 210
MS10A23S 68,207
MS10B12E05F 205
MS10B12E05G5 205
MS10B12E05G10 205
MS10B12E05G15 205
MS10B12E05G30 205
MS10B12E08F 205
MS10B12E08G5 205
MS10B12E08G10 205
MS10B12E08G15 205
MS10B12E08G30 205
MS14M23F 26,34,42,
52,84,92,
108,124,140,
148,164,176,207
MS14M23G5 26,34,42,
52,84,92,
108,124,140,
148,164,176,207
MS14M23G10 26,34,42,
52,84,92,
108,124,140,
148,164,176,207
MS14M23G15 26,34,42,
52,84,92,
108,124,140,
148,164,176,207
MS14M23G30 26,34,42,
52,84,92,
108,124,140,
148,164,176,207
MS16M12E06F 204
MS16M12E06G5 204
MS16M12E06G10 204
MS16M12E06G15 204
MS16M12E06G30 204
MS16M12E09F 204
MS16M12E09G5 205
MS16M12E09G10 205
MS16M12E09G15 205
MS16M12E09G30 205
MS16M23F 26,34,42,
52,84,92,
108,124,140,
148,164,176,207
Part Number Index (1-MS)
241
MS16M23G5 26,34,42,
52,84,92,
108,124,140,
148,164,176,207
MS16M23G10 26,34,42,
52,84,92,
108,124,140,
148,164,176,207
MS16M23G15 26,34,42,
52,84,92,
108,124,140,
148,164,176,207
MS16M23G30 26,34,42,
52,84,92,
108,124,140,
148,164,176,207
MS20M23F 26,34,42,
52,84,92,
108,124,140,
148,164,176,207
MS20M23G5 26,34,42,
52,84,92,
108,124,140,
148,164,176,207
MS20M23G10 26,34,42,
52,84,92,
108,124,140,
148,164,176,207
MS20M23G15 26,34,42,
52,84,92,
108,124,140,
148,164,176,207
MS20M23G30 26,34,42,
52,84,92,
108,124,140,
148,164,176,207
MS20W12E06F 204
MS20W12E06G5 204
MS20W12E06G10 204
MS20W12E06G15 204
MS20W12E06G30 204
MS20W12E09F 204
MS20W12E09G5 204
MS20W12E09G10 204
MS20W12E09G15 204
MS20W12E09G30 204
MS20W23F 43,76,116,
132,156,172,208
MS20W23G5 43,76,116,
132,156,172,208
MS20W23G10 43,76,116,
132,156,172,208
MS20W23G15 43,76,116,
132,156,172,208
MS20W23G30 43,76,116,
132,156,172,208
MS24M23F 26,34,42,52,
84,92,108,
124,140,148,
164,176,208
MS24M23G5 26,34,42,52,
84,92,108,
124,140,148,
164,176,208
MS24M23G10 26,34,42,
52,84,92,
108,124,140,148,
164,176,208
MS24M23G15 26,34,42,
52,84,92,
108,124,140,148,
164,176,208
MS24M23G30 26,34,42,
52,84,92,
108,124,140,148,
164,176,208
MS24W23F 43,76,116,
132,156,172,208
MS24W23G5 43,76,116,
132,156,172,208
MS24W23G10 43,76,116,
132,156,172,208
MS24W23G15 43,76,116,
132,156,172,208
MS24W23G30 43,76,116,
132,156,172,208
MS28W23F 43,76,116,
132,156,172,208
MS28W23G5 43,76,116,
132,156,172,208
MS28W23G10 43,76,116,
132,156,172,208
MS28W23G15 43,76,116,
132,156,172,208
MS28W23G30 43,76,116,
132,156,172,208
QXRT08 68
QXRT08R 68
QXRT12S 52,53,60,
100,109
QXRT16 26,27,34,35,
43,45,53,84,85,92,
93,108,109,124,125,
140,141,148,149,164,
165,176,177
QXRT20 43,45,76,77,
116,117,132,133,
156,157,172,173
RB00011910 33,41,75
RB00011912 25,83,115
RB00011914 51,61,91,
123,131
RB00011916 69,107,
139,155
RB00011918 101,147,171
RB00011920 163
RT0B12CGNS1 21,79,111
RT0B12CGNS2 21,79,111
RT0B14CGNS1 47,55,
87,119,127
RT0B14CGNS2 47,55,
87,119,127
RT0B16CGNS1 63,103,
135,151
RT0B16CGNS2 63,103,
135,151
RT0L10CGNS1 29,37,71
RT0L10CGNS2 29,37,71
RT0L12CGNS1 21,79,111
RT0L12CGNS2 21,79,111
RT0L14CGNS1 47,55,87,
119,127
RT0L14CGNS2 47,55,87,
119,127
RT0L16CGNS1 63,103,
135,151
RT0L16CGNS2 63,103,
135,151
RT0L18CGNS1 95,143,167
RT0L18CGNS2 95,143,167
RT0L20CPGS5 159
RT0L20CPGS6 159
RT0S10CGNS1 29,37,71
RT0S10CGNS2 29,37,71
RT0S12CGNS1 21,79,111
RT0S12CGNS2 21,79,111
RT0S14CGNS1 47,55,87,
119,127
RT0S14CGNS2 47,55,87,
119,127
RT0S16CGNS1 63,103,
135,151
RT0S16CGNS2 63,103,
135,151
RT0S18CGNS1 95,143,167
RT0S18CGNS2 95,143,167
RT0W0106PNH 71
RT0W0106PNHEC 71
RT0W0106PNHK 71
RT0W0106SNH 71
RT0W0106SNHEC 71
RT0W0106SNHK 71
RT0W01210PNH 111
RT0W01210PNHEC 111
RT0W01210PNHK 111
RT0W01210SNH 111
RT0W01210SNHEC 111
RT0W01210SNHK 111
RT0W01419PNH 127
RT0W01419PNHEC 127
RT0W01419PNHK 127
RT0W01419SNH 127
RT0W01419SNHEC 127
RT0W01419SNHK 127
RT0W01626PNH 151
RT0W01626PNHEC 151
RT0W01626PNHK 151
RT0W01626SNH 151
RT0W01626SNHEC 151
RT0W01626SNHK 151
RT0W01832PNH 167
RT0W01832PNHEC 167
RT0W01832PNHK 167
RT0W01832SNH 167
RT0W01832SNHEC 167
RT0W01832SNHK 167
RT0W6106PNH 71
RT0W6106PNHEC 71
RT0W6106PNHK 71
RT0W6106SNH 71
RT0W6106SNHEC 71
RT0W6106SNHK 71
RT0W7106PNH 71
RT0W7106PNHEC 71
RT0W7106PNHK 71
RT0W7106SNH 71
RT0W7106SNHEC 71
RT0W7106SNHK 71
RT0W61210PNH 111
RT0W61210PNHEC 111
RT0W61210PNHK 111
RT0W61210SNH 111
RT0W61210SNHEC 111
RT0W61210SNHK 111
RT0W61419PNH 127
RT0W61419PNHEC 127
RT0W61419PNHK 127
RT0W61419SNH 127
RT0W61419SNHEC 127
RT0W61419SNHK 127
RT0W61626PNH 151
RT0W61626PNHEC 151
RT0W61626PNHK 151
RT0W61626SNH 151
RT0W61626SNHEC 151
RT0W61626SNHK 151
Appendix
Part Number Index (MS -RT0W )
242
Appendix
RT0W61832PNH 167
RT0W61832PNHEC 167
RT0W61832PNHK 167
RT0W61832SNH 167
RT0W61832SNHEC 167
RT0W61832SNHK 167
RT0W71210PNH 111
RT0W71210PNHEC 111
RT0W71210PNHK 111
RT0W71210SNH 111
RT0W71210SNHEC 111
RT0W71210SNHK 111
RT0W71419PNH 127
RT0W71419PNHEC 127
RT0W71419PNHK 127
RT0W71419SNH 127
RT0W71419SNHEC 127
RT0W71419SNHK 127
RT0W71626PNH 151
RT0W71626PNHEC 151
RT0W71626PNHK 151
RT0W71626SNH 151
RT0W71626SNHEC 151
RT0W71626SNHK 151
RT0W71832PNH 167
RT0W71832PNHEC 167
RT0W71832PNHK 167
RT0W71832SNH 167
RT0W71832SNHEC 167
RT0W71832SNHK 167
RT010DC 33,41,75
RT010DCG 33,41,75
RT010RL 33,41,75
RT012DC 25,83,115
RT012DCG 25,83,115
RT012RL 25,83,115
RT014DC 51,61,91,
123,131
RT014DCG 51,61,91,
123,131
RT014RL 51,61,91,
123,131
RT016DC 69,107,
139,155
RT016DCG 69,107,
139,155
RT016RL 69,107,139155
RT018DC 101,147,171
RT018DCG 101,147,171
RT018RL 101,147,171
RT020DC 163
RT020DCG 163
RT020RL 163
RT00102PNH 37
RT00102PNHEC 37
RT00102PNHEC 37
RT00102PNHK 37
RT00102SNH 37
RT00102SNHEC 37
RT00102SNHEC 37
RT00102SNHK 37
RT00104PNH 29
RT00104PNHEC 29
RT00104PNHK 29
RT00104SNH 29
RT00104SNHEC 29
RT00104SNHK 29
RT00123PNH 21
RT00123PNHEC 21
RT00123PNHK 21
RT00123SNH 21
RT00123SNHEC 21
RT00123SNHK 21
RT00128PNH 79
RT00128PNHEC 79
RT00128PNHK 79
RT00128SNH 79
RT00128SNHEC 79
RT00128SNHK 79
RT00142PNH 47
RT00142PNHEC 47
RT00142SNH 47
RT00142SNHEC 47
RT00144PNH 55
RT00144PNHEC 55
RT00144SNH 55
RT00144SNHEC 55
RT00148PNH 87
RT00148PNHEC 87
RT00148SNH 87
RT00148SNHEC 87
RT00164PNH 63
RT00164PNHEC 63
RT00164SNH 63
RT00164SNHEC 63
RT00169PNH 103
RT00169PNHEC 103
RT00169SNH 103
RT00169SNHEC 103
RT00188PNH 95
RT00188PNHEC 95
RT00188SNH 95
RT00188SNHEC 95
RT610DC 33
RT610DC 41
RT610DC 75
RT610DCG 33
RT610DCG 41
RT610DCG 75
RT612DC 25
RT612DC 83
RT612DC 115
RT612DCG 25
RT612DCG 83
RT612DCG 115
RT614DC 51
RT614DC 61
RT614DC 91
RT614DC 123
RT614DC 131
RT614DCG 51
RT614DCG 61
RT614DCG 91
RT614DCG 123
RT614DCG 131
RT616DC 69
RT616DC 107
RT616DC 139
RT616DC 155
RT616DCG 69
RT616DCG 107
RT616DCG 139
RT616DCG 155
RT618DC 101
RT618DC 147
RT618DC 171
RT618DCG 101
RT618DCG 147
RT618DCG 171
RT620DC 163
RT620DCG 163
RT001412PNH 119
RT001412PNHEC 119
RT001412PNHK 119
RT001412SNH 119
RT001412SNHEC 119
RT001412SNHK 119
RT001619PNH 135
RT001619PNHEC 135
RT001619PNHK 135
RT001619SNH 135
RT001619SNHEC 135
RT001619SNHK 135
RT001823PNH 143
RT001823PNHEC 143
RT001823PNHK 143
RT001823SNH 143
RT001823SNHEC 143
RT001823SNHK 143
RT002028PNH 159
RT002028PNHEC 159
RT002028PNHK 159
RT002028SNH 159
RT002028SNHEC 159
RT002028SNHK 159
RT002448PNH 174
RT002448SNH 174
RT06102PNH 37
RT06102PNHEC 37
RT06102SNH 37
RT06102SNHEC 37
RT06104PNH 29
RT06104PNHEC 29
RT06104PNHK 29
RT06104SNH 29
RT06104SNHEC 29
RT06104SNHK 29
RT06123PNH 21
RT06123PNHEC 21
RT06123PNHK 21
RT06123SNH 21
RT06123SNHEC 21
RT06123SNHK 21
RT06128PNH 79
RT06128PNHEC 79
RT06128PNHK 79
RT06128SNH 79
RT06128SNHEC 79
RT06128SNHK 79
RT06142PNH 47
RT06142PNHEC 47
RT06142SNH 47
RT06142SNHEC 47
RT06144PNH 55
RT06144PNHEC 55
RT06144SNH 55
RT06144SNHEC 55
RT06148PNH 87
RT06148PNHEC 87
RT06148SNH 87
RT06148SNHEC 87
RT06164PNH 63
RT06164PNHEC 63
RT06164SNH 63
RT06164SNHEC 63
RT06188PNH 95
RT06188PNHEC 95
RT06188SNH 95
RT06188SNHEC 95
RT07102PNH 37
RT07102PNHEC 37
RT07102SNH 37
RT07102SNHEC 37
RT07104PNH 29
RT07104PNHEC 29
RT07104PNHK 29
Appendix
Part Number Index (RT0W -RT0)
243
RT07104SNH 29
RT07104SNHEC 29
RT07104SNHK 29
RT07123PNH 21
RT07123PNHEC 21
RT07123PNHK 21
RT07123SNH 21
RT07123SNHEC 21
RT07123SNHK 21
RT07128PNH 79
RT07128PNHEC 79
RT07128PNHK 79
RT07128SNH 79
RT07128SNHEC 79
RT07128SNHK 79
RT07142PNH 47
RT07142PNHEC 47
RT07142SNH 47
RT07142SNHEC 47
RT07144PNH 55
RT07144PNHEC 55
RT07144SNH 55
RT07144SNHEC 55
RT07148PNH 87
RT07148PNHEC 87
RT07148SNH 87
RT07148SNHEC 87
RT07164PNH 63
RT07164PNHEC 63
RT07164SNH 63
RT07164SNHEC 63
RT07169PNHEC 103
RT07169SNHEC 103
RT07188PNH 95
RT07188PNHEC 95
RT07188SNH 95
RT07188SNHEC 95
RT061412PNH 119
RT061412PNHEC 119
RT061412PNHK 119
RT061412SNH 119
RT061412SNHEC 119
RT061412SNHK 119
RT061609PNH 103
RT061609PNHEC 103
RT061609SNH 103
RT061609SNHEC 103
RT061619PNH 135
RT061619PNHEC 135
RT061619PNHK 135
RT061619SNH 135
RT061619SNHEC 135
RT061619SNHK 135
RT061823PNH 143
RT061823PNHEC 143
RT061823PNHK 143
RT061823SNH 143
RT061823SNHEC 143
RT061823SNHK 143
RT062028PNH 159
RT062028PNHEC 159
RT062028PNHK 159
RT062028SNH 159
RT062028SNHEC 159
RT062028SNHK 159
RT062448PNH 174
RT062448SNH 174
RT071412PNH 119
RT071412PNHEC 119
RT071412PNHK 119
RT071412SNH 119
RT071412SNHEC 119
RT071412SNHK 119
RT071609PNH 103
RT071609SNH 103
RT071619PNH 135
RT071619PNHEC 135
RT071619PNHK 135
RT071619SNH 135
RT071619SNHEC 135
RT071619SNHK 135
RT071823PNH 143
RT071823PNHEC 143
RT071823PNHK 143
RT071823SNH 143
RT071823SNHEC 143
RT071823SNHK 143
RT072028PNH 159
RT072028PNHEC 159
RT072028PNHK 159
RT072028SNH 159
RT072028SNHEC 159
RT072028SNHK 159
RTFD10B 33,41,75
RTFD12B 25,83,91,115
RTFD14B 51,61,123,131
RTFD16B 69,107,139,155
RTFD18B 101,147,171
RTFD20B 163
RTFD24B 174
RTHP0121PN-16C 179
RTHP0121PN-H1 179
RTHP0141PN-25C 183
RTHP0141PN-H1 183
RTHP0141PN-M1 183
RTHP0161PN-35C 187
RTHP0161PN-50C 187
RTHP0161PN-H1 187
RTHP0161PN-M1 187
RTHP0201PNH-50C 191
RTHP0201PNH-70C 191
RTHP0201PNH-95C 191
RTHP0201PNH-H1 191
RTHP0201PNH-M1 191
RTHP0203PNH-16C 197
RTHP0203SNH-16C 197
RTHP6121SNH16-BS2 179
RTHP6121SNH-16S2 179
RTHP6141SNH25-BS2 183
RTHP6141SNH25-EC 183
RTHP6141SNH25-PS2 183
RTHP6141SNH-25S2 183
RTHP6161SNH25-PS3 187
RTHP6161SNH35-PS2 187
RTHP6161SNH-35S2 187
RTHP6161SNH50-PS2 187
RTHP6201SNH25-PS5 191
RTHP6201SNH35-PS2 191
RTHP6201SNH50-PS2 191
RTHP6201SNH70-PS1 191
RTHP6201SNH70-PS2 191
RTHP6201SNH95-PS2 191
RTHP6203PNH-16S2 197
RTHP6203SNH-16S2 197
SP12A1T 53,60,
100,109,202
SP14M1F 27,35,44,53,
85,93,109,125,141,
149,165,177,202
SP14M1G5 27,35,44,53,
85,93,109,125,141,
149,165,177,202
SP14M1G10 27,35,44,53,
85,93,109,125,141,
149,165,177,202
SP14M1G15 27,35,44,53,
85,93,109,125,141,
149,165,177,202
SP14M1G30 27,35,44,53,
85,93,109,125,141,
149,165,177,202
SP16M1F 27,35,44,53,
85,93,109,125,141,
149,165,177,202
SP16M1G5 27,35,44,53,
85,93,109,125,141,
149,165,177,202
SP16M1G10 27,35,44,53,
85,93,109,125,141,
149,165,177,202
SP16M1G15 27,35,44,53,
85,93,109,125,141,
149,165,177,202
SP16M1G30 27,35,44,53,
85,93,109,125,141,
149,165,177,202
SP20M1F 27,35,44,53,
85,93,109,125,141,
149,165,177,202
SP20M1G5 27,35,44,53,
85,93,109,125,141,
149,165,177,202
SP20M1G10 27,35,44,53,
85,93,109,125,141,
149,165,177,202
SP20M1G15 27,35,44,53,
85,93,109,125,141,
149,165,177,202
SP20M1G30 27,35,44,53,
85,93,109,125,141,
149,165,177,202
SP20W1F 45,77,117,
133,157,173,203
SP20W1G5 45,77,117,
133,157,173,203
SP20W1G10 45,77,117,
133,157,173,203
SP20W1G15 45,77,117,
133,157,173,203
SP20W1G30 45,77,117,
133,157,173,203
SP24M1F 27,35,44,53,85,
93,109,125,141,
149,165,177,202
SP24M1G5 27,35,44,53,
85,93,109,125,
141,149,165,
177,202
SP24M1G10 27,35,44,53,
85,93,109,125,
141,149,165,
177,203
SP24M1G15 27,35,44,53,
85,93,109,125,
141,149,165,
177,203
SP24M1G30 27,35,44,53,
85,93,109,125,
141,149,165,
177,203
SP24W1F 45,77,117,
133,157,173,203
SP24W1G5 45,77,117,
133,157,173,203
Appendix
Part Number Index (RT0-SP)
244
Appendix
SP24W1G10 45,77,117,
133,157,173,203
SP24W1G15 45,77,117,
133,157,173,203
SP24W1G30 45,77,117,
133,157,173,203
SP28W1F 45,77,117,
133,157,173,203
SP28W1G5 45,77,117,
133,157,173,203
SP28W1G10 45,77,117,
133,157,173,203
SP28W1G15 45,77,117,
133,157,173,203
SP28W1G30 45,77,117,
133,157,173,203
SS12A1T 53,60,100,
109,202
SS14M1F 27,35,44,53,
85,93,109,125,
141,149,165,
177,202
SS14M1G5 27,35,44,53,
85,93,109,125,
141,149,165,
177,202
SS14M1G10 27,35,44,53,
85,93,109,125,
141,149,165,
177,202
SS14M1G15 27,35,44,53,
85,93,109,125,
141,149,165,
177,202
SS14M1G30 27,35,44,53,
85,93,109,125,
141,149,165,
177,202
SS16M1F 27,35,44,53,
85,93,109,125,
141,149,165,
177,202
SS16M1G5 27,35,44,53,
85,93,109,125,
141,149,165,
177,202
SS16M1G10 27,35,44,53,
85,93,109,125,
141,149,165,
177,202
SS16M1G15 27,35,44,53,
85,93,109,125,
141,149,165,
177,202
SS16M1G30 27,35,44,53,
85,93,109,125,
141,149,165,
177,202
SS20M1F 27,35,44,53,
85,93,109,125,
141,149,165,
177,202
SS20M1G5 27,35,44,53,
85,93,109,125,
141,149,165,
177,202
SS20M1G10 27,35,44,53,
85,93,109,125,
141,149,165,
177,202
SS20M1G15 27,35,44,53,
85,93,109,125,
141,149,165,
177,202
SS20M1G30 27,35,44,53,
85,93,109,125,
141,149,165,
177,202
SS20W1F 45,77,117,
133,157,173,203
SS20W1G5 45,77,117,
133,157,173,203
SS20W1G10 45,77,117,
133,157,173,203
SS20W1G15 45,77,117,
133,157,173,203
SS20W1G30 445,77,117,
133,157,173,203
SS24M1F 27,35,44,53,
85,93,109,125,
141,149,165,
177,202
SS24M1G5 27,35,44,53,
85,93,109,125,
141,149,165,
177,202
SS24M1G10 27,35,44,53,
85,93,109,125,
141,149,165,
177,203
SS24M1G15 27,35,44,53,
85,93,109,125,
141,149,165,
177,203
SS24M1G30 27,35,44,53,
85,93,109,125,
141,149,165,
177,203
SS24W1F 45,77,117,
133,157,173,203
SS24W1G5 45,77,117,
133,157,173,203
SS24W1G10 45,77,117,
133,157,173,203
SS24W1G30 45,77,117,
133,157,173,203
SS28W1F 45,77,117,
133,157,173,203
SS28W1G5 45,77,117,
133,157,173,203
SS28W1G10 45
SS28W1G10 45,77,117,
133,157,173,203
SS28W1G15 45,77,117,
133,157,173,203
SS28W1G30 45,77,117,
133,157,173,203
Appendix
Part Number Index (SP-SS)
245
Catalog Number: CAT-ECOMATE-RM Pub 05/2018
USA
Amphenol Sine Systems
44724 Morley Drive
Clinton Township, MI 48036
Toll-Free: 1-800-394-7732
Fax: 1-586-465-1216
Email: csr@amphenol-sine.com
www.amphenol-sine.com
Germany
Amphenol Tuchel GmbH
August-Haeusser-Strasse 10
Heilbronn, Germany 74080
Phone: 49(0)-7131-929-0
Fax: 49(0)-7131-929-486
Email: info@amphenol.de
www.amphenol.de
China
Amphenol Sine Systems
Building 21, 1st Liao Keng Industrial Zone,
Shi Yan Street, Bao An District
Shenzhen, China 518180
Tel: 86-755-8173-8000 ext. 8098
Fax: 86-755-8173-8180
www.amphenol-sine.com.cn
USA
Amphenol Corporation
Corporate Headquarters
358 Hall Ave
Wallingford Ct 06492
Phone: (877) 267-4366
www.amphenol.com
Mexico
Prolongacion Reforma 61-6 B2
Col. Paseo de las Lomas
C.P. 01330 Mexico DF, Mexico
Phone: 52-55-5258-9984
Fax: 52-55-5081-6890
Email: info@amphenolmexico.com
www.amphenolmexico.com
Argentina
Amphenol ARGENTINA
Avenida Callao 930
2nd oor Ofce B Plaza
C1023AAP Buenos Aires, Argentina
Phone: 54-11-4815-6886
Fax: 54-11-4814-5779
Email: info@amphenol.com.ar
amphenol.com.ar
Brazil
Amphenol do Brasil Ltda
Rua Diogo Moreira, 132
20 Andar, Rooms 2001-2-3
CEP 05423-101
Sao Paulo- SP, Brazil
Phone: 55-11-3815-1003
Fax: 55-11-3815-1629
www.amphenol.com.br
France
Amphenol SOCAPEX
948, Promenade de l’Arve - BP 29
74311 Thyez CEDEX, France
Phone: 33(0)4-50-89-28-40
Fax: 33(0)4-50-96-29-75
www.amphenol-socapex.com
United Kingdom
Amphenol LIMITED
Thanet Way, Whitstable
Kent CT5 3JF, United Kingdom
Phone: 44-1-227-773200
Fax: 44-1-227-276571
www.amphenol.co.uk
Australia
Amphenol AUSTRALIA PTY LIMITED
2 Fiveways Blvd., Keysborough
Melbourne, Victoria 3173 Australia
Phone: 613-8796-8888
Fax: 613-8796-8801
www. amphenol.com.au
Turkey
Amphenol International Ltd Turkey
Sun Plaza Kat. 15
Maslak Mah. Bilim Sok. No. 5
34398 Sisli / Istanbul – Turkey
Tel: + 90 212 367.92.20
Fax: + 90 212 367.92.21
www.amphenol.com.tr
South Africa
Amphenol International Ltd
South Africa
30 Impala Road
2196 Sandton, Chislehurston
South Africa
Phone: 27-11-783-9517
Fax: 27-11-783-9519
Email: sales@amphenolafrica.com
www.amphenol.com.za
India
Amphenol INTERCONNECT INDIA PVT LTD
105 Bhosari Industrial Area
Pune 411 026, India
Phone: +91 20 67360304
Fax: +91 20 67360321
www.amphenol-in.com
Korea
Amphenol DAESHIN
558. Songnae-2 Dong. SoSa-Gu
Bucheon City, Gyeonggi-do,
Korea 422-818
Phone: 81-32-610-3800
Fax: 81-32-673-2507
Email: info@amphenol.co.kr
www. amphenol.co.kr
Japan
Amphenol JAPAN
471-1, Deba, Ritto-city
shiga 520-3041, Japan
Phone: 81-77-553-8501
Fax: 81-77-551-2200
www.amphenol.co.jp
Russia
Amphenol RUSSIA
8 Yaroslavskaja Street
129164 Moscow, Russia
Phone: 7495-937-6341
Fax: 7495-937-6319
www.amphenol.ru
www.amphenol-sine.com
