PA09M
PA09MU 1
PA09M/883
SG PARAMETER SYMBOL TEMP. POWER TEST CONDITIONS MIN MAX UNITS
1 Quiescent Current IQ 25°C ±35V VIN = 0, AV = 100 85 mA
1 Input Offset Voltage VOS 25°C ±35V VIN = 0, AV = 100 3 mV
1 Input Offset Voltage VOS 25°C ±12V VIN = 0, AV = 100 5.3 mV
1 Input Offset Voltage VOS 25°C ±40V VIN = 0, AV = 100 3.5 mV
1 Input Bias Current, +IN +IB 25°C ±35V VIN = 0 100 pA
1 Inout Bias Current, –IN –IB 25°C ±35V VIN = 0 100 pA
1 Input Offset Current IOS 25°C ±35V VIN = 0 50 pA
3 Quiescent Current IQ –55°C ±35V VIN = 0, AV = 100 165 mA
3 Input Offset Voltage VOS –55°C ±35V VIN = 0, AV = 100 5.4 mV
3 Input Offset Voltage VOS –55°C ±12V VIN = 0, AV = 100 7.7 mV
3 Input Offset Voltage VOS –55°C ±40V VIN = 0, AV = 100 5.9 mV
3 Input Bias Current, +IN +IB –55°C ±35V VIN = 0 100 pA
3 Input BiasCurrent, –IN –IB –55°C ±35V VIN = 0 100 pA
3 Input Offset Current IOS –55°C ±35V VIN = 0 50 pA
2 Quiescent Current IQ 125°C ±35V VIN = 0, AV = 100 140 mA
2 Input Offset Voltage VOS 125°C ±35V VIN = 0, AV = 100 6 mV
2 Input Offset Voltage VOS 125°C ±12V VIN = 0, AV = 100 8.3 mV
2 Input Offset Voltage VOS 125°C ±40V VIN = 0, AV = 100 6.5 mV
2 Input Bias Current, +IN +IB 125°C ±35V VIN = 0 10 nA
2 Input Bias Current, –IN –IB 125°C ±35V VIN = 0 10 nA
2 Input Offset Current IOS 125°C ±35V VIN = 0 10 nA
4 Output Voltage, IO = 3A VO 25°C ±21.3V RL = 3.75Ω 11.3 V
4 Output Voltage, IO = 66mA VO 25°C ±40V RL = 500Ω 33 V
4 Output Voltage, IO = 2A VO 25°C ± 38V RL = 15Ω 30 V
4 Current Limits ICL 25°C ±32.2V RL = 3.75Ω 3.4 6 A
4 Stability/Noise EN 25°C ±35V RL = 500Ω, AV = 1, CL = 1.5nF 1 mV
4 Slew Rate SR 25°C ±35V RL = 500Ω 25 500 V/µs
4 Open Loop Gain AOL 25°C ±35V RL = 500Ω, F = 10Hz 80 dB
4 Common Mode Rejection CMR 25°C ±34.5V RL = 500Ω, F = DC, VCM = ±22.5V 64 dB
6 Output Voltage, IO = 3A VO –55°C ±21.3V RL = 3.75Ω 11.3 V
6 Output Voltage, IO = 66mA VO –55°C ±40V RL = 500Ω 33 V
6 Output Voltage, IO = 2A VO –55°C ±38V RL = 15Ω 30 V
6 Stability/Noise EN –55°C ±35V RL = 500Ω, AV = 1, CL = 1.5nF 1 mV
6 Slew Rate SR –55°C ±35V RL = 500Ω 25 500 V/µs
6 Open Loop Gain AOL –55°C ±35V RL = 500Ω, F = 10Hz 80 dB
6 Common Mode Rejection CMR –55°C ±34.5V RL = 500Ω, F = DC, VCM = ±22.5V 64 dB
5 Output Voltage, IO = 66mA VO 125°C ±40V RL = 500Ω 33 V
5 Output Voltage, IO = 1A VO 125°C ±23.5V RL = 15Ω 15 V
5 Stability/Noise EN 125°C ±35V RL = 500Ω, AV = 1, CL = 1.5nF 1 mV
5 Slew Rate SR 125°C ±35V RL = 500Ω, 20 500 V/µs
5 Open Loop Gain AOL 125°C ±35V RL = 500Ω, F = 10Hz 80 dB
5 Common Mode Rejection CMR 125°C ±34.5V RL = 500Ω, F = DC, VCM = ±22.5V 64 dB
BURN IN CIRCUIT * These components are used to stabilize device
due to poor high frequency characteristics of burn
in board.
** Input signals are calculated to result in internal
power dissipation of approximately 2.1W at case
temperature = 125°C.
100KΩ
100KΩ
+15V
–15V
5
1
8
3
20Ω
** *
U.U.T
4
*
220Ω
100pF
7
Table 4 Group A Inspection
PA09M/883
Copyright © Apex Microtechnology, Inc. 2012
(All Rights Reserved)
www.apexanalog.com SEP 2012
PA09MU REVL
PA09M
2 PA09MU
NEED TECHNICAL HELP? CONTACT APEX SUPPORT!
For all Apex Microtechnology product questions and inquiries, call toll free 800-546-2739 in North America.
For inquiries via email, please contact apex.support@apexanalog.com.
International customers can also request support by contacting their local Apex Microtechnology Sales Representative.
To nd the one nearest to you, go to www.apexanalog.com
IMPORTANT NOTICE
Apex Microtechnology, Inc. has made every effort to insure the accuracy of the content contained in this document. However, the information is subject to change
without notice and is provided "AS IS" without warranty of any kind (expressed or implied). Apex Microtechnology reserves the right to make changes without further
notice to any specications or products mentioned herein to improve reliability. This document is the property of Apex Microtechnology and by furnishing this informa-
tion, Apex Microtechnology grants no license, expressed or implied under any patents, mask work rights, copyrights, trademarks, trade secrets or other intellectual
property rights. Apex Microtechnology owns the copyrights associated with the information contained herein and gives consent for copies to be made of the informa-
tion only for use within your organization with respect to Apex Microtechnology integrated circuits or other products of Apex Microtechnology. This consent does not
extend to other copying such as copying for general distribution, advertising or promotional purposes, or for creating any work for resale.
APEX MICROTECHNOLOGY PRODUCTS ARE NOT DESIGNED, AUTHORIZED OR WARRANTED TO BE SUITABLE FOR USE IN PRODUCTS USED FOR
LIFE SUPPORT, AUTOMOTIVE SAFETY, SECURITY DEVICES, OR OTHER CRITICAL APPLICATIONS. PRODUCTS IN SUCH APPLICATIONS ARE UNDER-
STOOD TO BE FULLY AT THE CUSTOMER OR THE CUSTOMER’S RISK.
Apex Microtechnology, Apex and Apex Precision Power are trademarks of Apex Microtechnolgy, Inc. All other corporate names noted herein may be trademarks
of their respective holders.
Copyright © Apex Microtechnology, Inc. 2012
(All Rights Reserved)
www.apexanalog.com SEP 2012
PA09MU REVL
