Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Aluminum Electrolytic Capacitors/ HD
– EEE-148 –
0D+1.0 max.
1.5±0.2
2.0 max. Terminal
(t=0.8)
4.0±0.5
4.0±0.5
(3.5)
Top of spin
Standard terminal type does not require
terminal trimming peocess.
L+2.0 max.
Rated voltage etc. indicate to sleeve.
(10.0)
10.0±0.1
2-02.0±0.1
P.E.T. Sleeve
Vent
Polarity bar
Recommended PWB piercing plan
0.8+0.2
–0.1
(0D)
■Features
●Endurance : 105 °C 3000 h
●30 % smaller than series TS-HC
●RoHS directive compliant
Snap-in Type
Series: HD Type: TS
■Speci cations
■Di men sions in mm (not to scale)
Category Temp. Range –25 °C to +105 °C
Rated W.V. Range 400 V.DC to 450 V.DC
Nominal Cap. Range 120 μF to 680 μF
Capacitance Tolerance ±20 % (120 Hz/+20 °C)
DC Leakage Cur rent 3√CV (μA) max. After 5 minutes application of rated working voltage at +20 °C.
C : Capacitance (μF) V: W.V. (V.DC)
tan dPlease see the attached standard products list
Endurance
After 3000 hours application of DC voltage with specifi ed ripple current (< rated DC working voltage)
at +105 °C, the capacitors shall meet the following limits.
Capacitance change < ±20 % of initial measured value
tan d< 200 % of initial specifi ed value
DC leakage current < initial specifi ed value
Shelf Life
After storage for 1000 hours at +105 °C±20 °C within no voltage applied and then being stabilized
at +20 °C, capacitors shall meet the limits specifi ed in Endurance. (With voltage treatment)
(Unit : mm)
Frequency (Hz)
50 60 100 120 500 1 k 10 k to
Correction factor 0.75 0.80 0.95 1.00 1.20 1.25 1.40
■Frequency correction factor for ripple current
01 Sep. 2013
Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Aluminum Electrolytic Capacitors/ HD
– EEE-149 –
■Standard Prod ucts
W.V. Cap.
(120 Hz)
(±20 %)
Case size Part No. Specifi cation Min. Packaging Q'ty
Dia. Length
PET sleeve
Terminal Length
4.0 mm
(Without Top Plate)
Ripple
Current
(120 Hz)
(+105 °C)
tan d
(120 Hz)
(+20 ° C)
max.
(V. DC) (μF) (mm) (mm) (A r.m.s.) (pcs)
400
120 22 25 EETHD2G121HJ 0.75 0.15 200
180 25 25 EETHD2G181JJ 0.95 0.15 200
220 22 35 EETHD2G221HJ 1.10 0.15 200
25 30 EETHD2G221JJ 1.10 0.15 200
270 25 35 EETHD2G271JJ 1.22 0.15 200
30 25 EETHD2G271KJ 1.22 0.15 100
330
22 50 EETHD2G331HJ 1.44 0.15 200
25 40 EETHD2G331JJ 1.44 0.15 200
35 25 EETHD2G331LJ 1.44 0.15 100
390 25 45 EETHD2G391JJ 1.55 0.15 200
35 25 EETHD2G391LJ 1.55 0.15 100
470
25 50 EETHD2G471JJ 1.68 0.15 200
30 35 EETHD2G471KJ 1.68 0.15 100
35 30 EETHD2G471LJ 1.68 0.15 100
560 30 40 EETHD2G561KJ 1.90 0.15 100
35 35 EETHD2G561LJ 1.90 0.15 100
680 30 50 EETHD2G681KJ 2.12 0.15 100
35 40 EETHD2G681LJ 2.12 0.15 100
420
120 22 25 EETHD2S121HJ 0.74 0.15 200
150 22 30 EETHD2S151HJ 0.84 0.15 200
25 25 EETHD2S151JJ 0.84 0.15 200
180 22 35 EETHD2S181HJ 0.91 0.15 200
25 30 EETHD2S181JJ 0.91 0.15 200
220 22 40 EETHD2S221HJ 1.05 0.15 200
25 35 EETHD2S221JJ 1.05 0.15 200
270
22 50 EETHD2S271HJ 1.20 0.15 200
25 40 EETHD2S271JJ 1.20 0.15 200
30 30 EETHD2S271KJ 1.20 0.15 100
35 25 EETHD2S271LJ 1.20 0.15 100
330 25 45 EETHD2S331JJ 1.42 0.15 200
30 35 EETHD2S331KJ 1.42 0.15 100
390
25 50 EETHD2S391JJ 1.55 0.15 200
30 40 EETHD2S391KJ 1.55 0.15 100
35 30 EETHD2S391LJ 1.55 0.15 100
470 30 45 EETHD2S471KJ 1.71 0.15 100
35 35 EETHD2S471LJ 1.71 0.15 100
560 30 50 EETHD2S561KJ 1.90 0.15 100
35 40 EETHD2S561LJ 1.90 0.15 100
450
120 22 30 EETHD2W121HJ 0.72 0.20 200
25 25 EETHD2W121JJ 0.72 0.20 200
180 22 35 EETHD2W181HJ 0.87 0.20 200
25 30 EETHD2W181JJ 0.87 0.20 200
220
22 45 EETHD2W221HJ 1.00 0.20 200
25 35 EETHD2W221JJ 1.00 0.20 200
30 25 EETHD2W221KJ 1.00 0.20 100
270
22 50 EETHD2W271HJ 1.19 0.20 200
25 40 EETHD2W271JJ 1.19 0.20 200
30 30 EETHD2W271KJ 1.19 0.20 100
35 25 EETHD2W271LJ 1.19 0.20 100
330 25 45 EETHD2W331JJ 1.38 0.20 200
30 35 EETHD2W331KJ 1.38 0.20 100
390 30 40 EETHD2W391KJ 1.55 0.20 100
35 30 EETHD2W391LJ 1.55 0.20 100
470 30 45 EETHD2W471KJ 1.74 0.20 100
35 35 EETHD2W471LJ 1.74 0.20 100
560 30 50 EETHD2W561KJ 1.90 0.20 100
35 40 EETHD2W561LJ 1.90 0.20 100
Endurance : 105 °C 3000 h
01 Sep. 2013
