F-214 CLP-115-02-L-D CLP-107-02-F-D-P CLP-130-02-L-D CLP-116-02-F-DH (1,27 mm) .050" CLP SERIES LOW PROFILE DUAL WIPE SOCKET SPECIFICATIONS High reliability Tiger ClawTM contacts Mates with: FTSH, FTS, FW For complete specifications and recommended PCB layouts see www.samtec.com?CLP Insulator Material: Black Liquid Crystal Polymer Contact Material: Phosphor Bronze Plating: Sn or Au over 50" (1,27 m) Ni Current Rating (CLP/FTSH): 3.3 A per pin (1 pin powered per row) Operating Temp Range: -55C to +125C Contact Resistance: 10 m Insertion Depth: Top Entry = (1,40 mm) .055" minimum, Bottom Entry = (2,41 mm) .095" minimum plus board thickness DH Entry = (2,31 mm) .091" to (2,67 mm) .105" Insertion Force: (Single contact only) 3.8 oz (1,05 N) average Normal Force: 60 grams (0,59 N) average Withdrawal Force: (Single contact only) 2 oz (0,56 N) average Max Cycles: 100 with 10" (0,25 m) Au RoHS Compliant: Yes (1,27 mm x 1,27 mm) .050" x .050" micro pitch APPLICATIONS Low Profile (2,21 mm) .087" CLP FTSH HORIZONTAL Surface Mount CLP 1 NO. PINS PER ROW PLATING OPTION 02 -F = Gold flash on contact, Matte Tin on tail 02 thru 50 Processing: Lead-Free Solderable: Yes SMT Lead Coplanarity: (0,10 mm) .004" max (02-35) (0,15 mm) .006" max (36-50) 100 (1,27) .050 02 01 99 = Double Horizontal (Requires FTSH -01 lead style) -K (1,27) .050 -P (2,44) .096 (2,29) .090 -D A PIN/ROW A (3,56) .140 04-15 (7,11) .280 16-50 If odd pins/row, alignment pins are on middle position on centerline of the part. If even pins/row, then alignment pins are between middle two positions. WWW.SAMTEC.COM (1,40) .055 -A = Alignment Pin (Not available with -PA option) (05, 06, 07, 08, 10, 12, 15, 20, 25, 30, 40 positions only) (-DH option and other sizes. Contact Samtec.) = (4,00 mm) .157" DIA Polyimide film Pick & Place Pad (5 positions min.) -P OPTION (3,43) .135 -DH Note: Some sizes, styles and options are non-standard, non-returnable. = Bottom Entry (Required for bottom entry applications) (6,35) .250 x (3,18) .125 (4,32) .170 OTHER OPTION - BE -D = Double Row = 10" (0,25 m) Gold (-D only) (0,41) .016 (4,57) (3,05) .180 .120 (MOQ Required) * Single row * Other platings Contact Samtec. -G No. of Positions x (1,27) .050 + (0,43) .017 For complete scope of recognitions see www.samtec.com/quality ROW OPTION -DH -L = 10" (0,25 m) Gold on contact, Matte Tin on tail RECOGNITIONS ALSO AVAILABLE Suitable for pass-through applications PASS-THRU - PA (8,25) .325 (3,00) .118 (0,89) .035 DIA (7,00) .275 -PA OPTION = Pick & Place Pad (5 positions min. -D only) (Not always necessary for auto placement. See Flex Processing.) = Pick & Place Pad with Alignment Pin (-D only) (Not Available with -A option) -TR = Tape & Reel