TPU207 PIEZOELECTRIC INVERTER MODULE FEATURES APPLICATIONS Small and Very Low Profile (h = 3.5 mm max.) Wide Input Voltage Range No Leakage Flux Low Distortion Sinusoidal Waveform Ceramic Materials Improve Safety Camcorder Built-In LCD Monitor Digital Electronic Still Cameras Portable Video Equipment Color GPS Displays Personal Digital Assistant (PDA) Instrumentation LCD Monitors DESCRIPTION The TPU207 is a CCFL driving inverter unit with a maximum height of 3.5 mm. It uses a piezo-ceramic transformer and is suitable as a inverter unit for small LCD monitors (1.8 to 4.0 inch display). TPU207 48.5 OUT+ VIN 16 PWM ON/OFF GND CCFL CURRENT 3.5 max OUT- Unit: mm VIN VIN CAPA A PWM ON/OFF GND B December 1999 TOKO, Inc. OUT+ CCFL TPU207 CCFL CURRENT OUT- Page 1 TPU207 SPECIFICATIONS Toko Part Number TPU207N-1001 SYMBOL PARAMETER TEST CONDITIONS MIN TYP MAX UNITS 5 9 V VIN Module Input Voltage VIN(PWM) PWM ON/OFF Control Voltage f = 100 to 500 Hz, Duty Cycle 20% to 100% Note 1 2.7 9 V VIN(CURRENT) CCFL Current Control Voltage Note 2 2.5 4.1 V VODC Output Open Circuit Voltage PCCFL Power Consumption of CCFL FOSC Oscillating Frequency TOP Operating Temperature Range IOUT Output Load Current EFF Efficiency ICCFL CCFL Current VPWM(ON) PWM ON/OFF ON VPWM(OFF) PWM ON/OFF OFF 1500 Vrms 1.5 190 0 VIN = 5 V W kHz 60 C 2.5 mArms 80 % VIN(CURRENT) = 4.1 V 1.2 mA VIN(CURRENT) = 2.5 V 2.5 mA Output ON Output OFF Voltage and Duty Cycle 2.7 V 20 % Voltage or Duty Cycle 0 V 0 20 % Gen. Notes: Order of Power On should be CCFL Current VIN PWM ON/OFF. Inverter Module generates high voltage and should not be touched during operation. Note 1: PWM ON/OFF Control Pin is connected to VIN when PWM ON/OFF Control is always 100% Duty Cycle. Note 2: CCFL Current is 1.2 mA minimum when VIN(CURRENT) is 4.1 V. CCFL Current is 2.5 mA maximum when VIN(CURRENT) is 2.5 V. Page 2 December 1999 TOKO, Inc.