Rectifiers Standard Recovery 100-200 Amps Intemational teR|Rectifier les (1 Part lF(ay) @ Tc Fsm (1) Vem @ fit Number | VRRM so Hz | 60 Hz | x lr~ayy | Finic OC | Humber | Notes Case Style 1] (A) (C) (A) (A) ) (C/W) (14) 1N3111 50 5) (7 . 1N3085 100 Ri0 A (5) (7) BO-205AC 1N3086 200 (DO-30) 1N3087 300 1N3088 400 | 150 | 150 | 2850 | 3000 1.2 0.25 1N3089 500 1N3090 600 1N3091 800 4N3092 4000 4N5162 4200 150L5A 50 150L10A 100 ) @) 150L20A 200 150L30A 300 150L40A 400 | 150 | 150 | 3000 | 3140 1.33 0.25 150L60A 600 150L80A 800 150L 100A 1000 150L120A 4200 45L10 100 2) (3) (5 4520 200 (2) (8) ) 45140 400 45L60 600 | 150 | 150 | 3000 | 3140 1.33 0.25 4580 800 451100 1000 45120 1200 0} D150N02P 200 4) 6 Ld SD150NO4P 400 R10 B Oe \ SD150NO6P 600 \ SD150N08P 800 N SD150N10P 1000 N SD150N12P 1200 N SD150N14P 1400 | 150 | 125 | 2390 | 2500 1.6 0.27 N SD150N16P 1600 R11 B S SDISON1BPC | 1800 i SD150N20PC | 2000 tks, SD150N22PC | 2200 SD150N24PC | 2400 SD150N26PC | 2600 SD150N28PC | 2800 SDISON3OPC | 3000 R1BCG4A 400 | 200 4950 | 5200 1.13 R10 A (5) (10) R18CG4B 400 | 200 4600 | 4800 1.21 (11) (13) Ri8CG6A 600 | 200 4950 | 5200 1.13 Ri8CG6B 600 | 200 4800 | 4800 1.21 R18CG8A 800 | 200 4600 | 4800 1.21 R18CGBB 800 | 190 4300 | 4500 1.27 R18CG10A 1000 | 200 4600 | 4800 1.24 R18CG10B 1000 | 190 | 140 | 4300 | 4500 1.27 0.25 R1BC12A 1200 | 190 4300 | 4500 1.27 Alo B R18C12B 1200 | 185 3820 | 4000 1.38 (3) 03) Ri8C14A 1400 | 190 4300 | 4500 1.27 R18C14B 1400 | 185 3820 | 4000 1.38 R18C16A 4600 | 185 3820 | 4000 138 R18C18A 1800 | 185 3820 | 4000 1.38 $D200N02P 200 (4) (6) SD200N04P 400 R10 B SD200NO6P 600 SD200N08P goo | 200 | 115 | 3120 | 3265 1.50 0.27 SD200N12P 1200 SD200N14P 1400 SD200N16P 1600 SD200N18PC 1800 R11 B SD200N20PC } 2000 | 200 | 100 | 3120 | 3265 1,60 0.25 SD200N24PC | 2400 (1) Tj = Tj max, 100% VRRM reapplied. (2) Available with flat base, to specify add F', in basic part number as follows: 45LF. (3) Available with metric stud, to specify add M'' to end of basic part number, e.g. 45L120M (4) Available with metric stud : to specify change 'P to M at the end of part number, e.g. (5) Cathode to stud. For Anode to Stud add R to basic part number, e.g. 1N3735R, R1I8CGR4A. " D200N14M etc. (6) Cathode to stud . For Anode to stud change N to 'R in basic part number , e.g. SD200R12P. (7) Vem for JEDEC type is registered value at max Ty. (9) Also available with stud-topped case (152K...A, 152L...A), and flag terminal (164K...A, 154L...A}. (10) Also Available with flag terminal; add 2' to standard part number : R18CG4A2 (outline R15). (11) Also available with stud-topped case; add 3 to standard part number: R18CG4A3. (12) Also available with flag terminal: add 2 to standard part number, e.g. R18C12A2 (outline R16). 62 (13) U.S. standard. (14) For case outline drawing see page 150.