MICROPAC INDUSTRIES, INC. OPTOELECTRONIC PRODUCTS DIVISION • 725 E.Walnut St., Garland, TX 75040 • (972)272-3571 • Fax (972)487-6918
www.micropac.com E-MAIL: OPTOSALES @ MICROPAC.COM
4N47, 4N48, and 4N49 JAN, JANTX, JANTXV, AND JANS SINGLE CHANNEL OPTOCOUPLERS
06/23/03
*ELECTRICAL CHARACTERISTICS TA = 25°C Unless otherwise specified
PARAMETER SYMBOL MIN TYP MAX UNITS TEST CONDITIONS NOTE
Input Diode Static Reverse Current
Input Diode Static Forward Voltage -55°C
+25°C
°
VF
1.0
0.8
1.4 1.7
1.5
V
IF = 10mA
*OUTPUT TRANSISTOR TA = 25°C Unless otherwise specified
PARAMETER SYMBOL MIN TYP MAX UNITS TEST CONDITIONS NOTE
Collector-Base Breakdown Voltage V
45 V I
= 100µA, I
= 0, I
= 0
Collector-Emitter Breakdown Voltage V
40 V I
= 1mA, I
= 0, I
= 0
Emitter-Collector Breakdown Voltage V
7 V I
= 0, I
= 100µA, I
= 0
*COUPLED CHARACTERISTICS TA = 25°C Unless otherwise specified
PARAMETER SYMBOL MIN TYP MAX UNITS TEST CONDITIONS NOTE
On State Collector Current 4N47
4N48
IC(ON)
0.5
1.0
5
mA
VCE = 5V, IB = 0, IF = 1mA
On State Collector Current 4N47
-55°C 4N48
IC(ON)
0.7
1.4
mA
VCE = 5V, IB = 0, IF = 2mA
On State Collector Current 4N47
+100°C 4N48
IC(ON)
0.5
1.0
mA
VCE = 5V, IB = 0, IF = 2mA
2
Off State Collector Current +25°C IC(OFF) 100 nA VCE = 20V, IB = 0, IF = 0mA
Off State Collector Current +100°C
IC(OFF) 100 µA VCE = 20V, IB = 0, IF = 0mA
Collector-Emitter Saturation Voltage 4N47
4N48
4N49
VCE(SAT)
VCE(SAT)
VCE(SAT)
0.3
0.3
0.3
V
V
V
IC = 0.5mA, IB = 0, IF = 2mA
IC = 1mA, IB = 0, IF = 2mA
IC = 2mA, IB = 0, IF = 2mA
Input to Output Resistance RI-O 1011 Ω VIN-OUT = 1kV 1
Input to Output Capacitance CI-O 5 pF f = 1MHz, VIN-OUT = 1kV 1
Rise Time/ Fall Time 4N47
Phototransistor Operation 4N48
4N49
tr / tf
tr / tf
tr / tf
20
25
25
µs
µs
µs
VCC = 10V, IF = 10mA, RL = 100Ω
Rise Time/ Fall Time 4N47
Photodiode Operation 4N48
4N49
tr / tf
tr / tf
t
/ t
0.85
0.85
0.85
µs
µs
µs
VCC = 10V, IF = 10mA, RL = 100Ω
NOTES:
1. These parameters are measured between all phototransistor leads shorted together and with both input diode leads shorted together.
2. This parameter measured using pulse techniques tW = 100 µs, duty cycle ≤ 1%.
RECOMMENDED OPERATING CONDITIONS:
Input Current, High Level
SELECTION GUIDE
PART NUMBER PART DESCRIPTION
4N47 Commercial
4N48 Commercial
4N49 Commercial
JAN4N47 JAN Screened
JAN4N48 JAN Screened
JAN4N49 JAN Screened
JANTX4N47 JANTX Screened
JANTX4N48 JANTX Screened
JANTX4N49 JANTX Screened
JANTXV4N47 JANTXV Screened
JANTXV4N48 JANTXV Screened
JANTXV4N49 JANTXV Screened
JANS4N47 JANS Screened
JANS4N48 JANS Screened
JANS4N49 JANS Screened
*JEDEC registered data