Aluminum electrolytic capacitors Capacitors with screw terminals Series/Type: B41560, B41580 Date: November 2012 (c) EPCOS AG 2015. Reproduction, publication and dissemination of this publication, enclosures hereto and the information contained therein without EPCOS' prior express consent is prohibited. EPCOS AG is a TDK Group Company. Capacitors with screw terminals B41560, B41580 Extremely compact 105 C Long-life grade capacitors Applications General industrial electronics Professional power supplies Features High reliability, extremely good electrical characteristics High CV product, i.e. extremely compact High ripple current capability All-welded construction ensures reliable electrical contact Version with low-inductance design available RoHS-compatible Construction Charge-discharge proof, polar Aluminum case with insulating sleeve Poles with screw terminal connections Mounting with ring clips, clamps or threaded stud The bases of types with threaded stud are not insulated Please read Cautions and warnings and Important notes at the end of this document. Page 2 of 17 B41560 B41580 B41560, B41580 Extremely compact 105 C Specifications and characteristics in brief Rated voltage VR Surge voltage VS Rated capacitance CR Capacitance tolerance 25 ... 100 V DC 1.15 VR 1500 ... 330000 F 20% M Leakage current Ileak (20 C, 5 min) Self-inductance ESL Useful life1) 105 C; VR; IAC,R 85 C; VR; IAC,max 40 C; VR; 2.2 IAC,R Voltage endurance test 105 C; VR Approx. 20 nH Capacitors with low-inductance design: d 64.3 mm: approx. 13 nH > 3000 h > 6000 h > 250000 h 2000 h Requirements: C/C 45% of initial value ESR 3 times initial specified limit Ileak initial specified limit Post test requirements: C/C 15% of initial value ESR 1.3 times initial specified limit Ileak initial specified limit Vibration resistance test To IEC 60068-2-6, test Fc: Frequency range 10 ... 55 Hz, displacement amplitude 0.75 mm, acceleration max. 10 g, duration 3 x 2 h. Capacitor mounted by its body which is rigidly clamped to the work surface. IEC climatic category To IEC 60068-1: 40/105/56 (40 C/+105 C/56 days damp heat test) Detail specification Sectional specification Similar to CECC 30301-810 IEC 60384-4 Ripple current capability Due to the ripple current capability of the contact elements, the following current upper limits must not be exceeded: Capacitor diameter 51.6 mm 64.3 mm 76.9 mm IAC,max 34 A 45 A 57 A 1) Refer to chapter "General technical information, 5 Useful life" on how to interpret useful life. Please read Cautions and warnings and Important notes at the end of this document. Page 3 of 17 B41560, B41580 Extremely compact 105 C Dimensional drawings B41560 Ring clip/clamp mounting B41580 Threaded stud mounting Screw terminals with UNF threads are available upon request. Dimensions and weights Terminal Dimensions (mm) with insulating sleeve d l 1 l1 1 l2 +0/1 d1 M5 M5 M5 35.7 +0/0.8 35.7 +0/0.8 35.7 +0/0.8 55.7 80.7 105.7 62.2 87.2 112.2 13 13 13 M8 M8 M8 8.2 8.2 8.2 12.7 12.7 12.7 65 105 135 M5 M5 51.6 +0/0.8 51.6 +0/0.8 80.7 105.7 87.2 112.2 17 17 M12 M12 10.2 10.2 22.2 22.2 220 280 M5 64.3 +0/0.8 105.7 112.2 17 M12 13.2 28.5 440 M6 M6 76.9 +0/0.7 76.9 +0/0.7 105.7 143.2 111.5 149.0 17 17 M12 M12 17.7 17.7 31.7 31.7 620 840 For low-inductance design the following deviation applies: d = 64.3 mm: l1 0.7 mm Please read Cautions and warnings and Important notes at the end of this document. Page 4 of 17 d2 max. a +0.2/0.4 Approx. weight (g) B41560, B41580 Extremely compact 105 C Packing Capacitor diameter d (mm) 35.7 51.6 length l (mm) all all Packing units (pcs.) 36 36 Capacitor diameter d (mm) 64.3 76.9 For ecological reasons the packing is pure cardboard. Please read Cautions and warnings and Important notes at the end of this document. Page 5 of 17 length l (mm) all all Packing units (pcs.) 25 16 B41560, B41580 Extremely compact 105 C Special design Low-inductance design Design Identification in third Remark block of ordering code Low inductance (13 nH) M003 For capacitors with diameter d 64.3 mm Accessories The following items are included in the delivery package, but are not fastened to the capacitors: Thread Toothed washers Screws/nuts Maximum torque M5 A 5.1 DIN 6797 DIN 7985 / ISO 7045-M5 x 10-5.6-Z 2.5 Nm thread depth t 8 mm M6 A 6.4 DIN 6797 DIN 7985 / ISO 7045-M6 x 12-5.6-Z 4.0 Nm thread depth t 9.5 mm For mounting M8 J 8.2 DIN 6797 Hex nut BM 8 DIN 439 4 Nm For terminals M12 J 12.5 DIN 6797 Hex nut BM 12 DIN 439 10 Nm The following items must be ordered separately. For details, refer to chapter "Capacitors with screw terminals Accessories". Item Type Ring clips B44030 Clamps for capacitors with d 64.3 mm B44030 Insulating parts B44020 Please read Cautions and warnings and Important notes at the end of this document. Page 6 of 17 B41560, B41580 Extremely compact 105 C Overview of available types VR (V DC) 25 40 63 100 Case dimensions d x l (mm) CR (F) 1500 35.7 x 55.7 2200 35.7 x 80.7 35.7 x 80.7 3300 4700 35.7 x 55.7 35.7 x 105.7 6800 35.7 x 80.7 51.6 x 80.7 35.7 x 55.7 35.7 x 105.7 51.6 x 105.7 10000 15000 35.7 x 55.7 35.7 x 80.7 51.6 x 80.7 64.3 x 105.7 22000 35.7 x 80.7 35.7 x 105.7 51.6 x 105.7 76.9 x 105.7 33000 35.7 x 80.7 51.6 x 80.7 64.3 x 105.7 76.9 x 143.2 47000 35.7 x 105.7 51.6 x 105.7 64.3 x 105.7 68000 51.6 x 80.7 51.6 x 105.7 76.9 x 105.7 100000 51.6 x 105.7 64.3 x 105.7 76.9 x 143.2 150000 64.3 x 105.7 76.9 x 105.7 220000 76.9 x 105.7 76.9 x 143.2 330000 76.9 x 143.2 The capacitance and voltage ratings listed above are available in different cases upon request. Other voltage and capacitance ratings are also available upon request. Please read Cautions and warnings and Important notes at the end of this document. Page 7 of 17 B41560, B41580 Extremely compact 105 C Technical data and ordering codes CR 100 Hz 20 C F Case dimensions dxl mm VR = 25 V DC 15000 35.7 x 55.7 22000 35.7 x 80.7 33000 35.7 x 80.7 47000 35.7 x 105.7 68000 51.6 x 80.7 100000 51.6 x 105.7 150000 64.3 x 105.7 220000 76.9 x 105.7 330000 76.9 x 143.2 VR = 40 V DC 10000 35.7 x 55.7 15000 35.7 x 80.7 22000 35.7 x 105.7 33000 51.6 x 80.7 47000 51.6 x 105.7 68000 51.6 x 105.7 100000 64.3 x 105.7 150000 76.9 x 105.7 220000 76.9 x 143.2 VR = 63 V DC 4700 35.7 x 55.7 6800 35.7 x 80.7 10000 35.7 x 105.7 15000 51.6 x 80.7 22000 51.6 x 105.7 33000 64.3 x 105.7 47000 64.3 x 105.7 68000 76.9 x 105.7 100000 76.9 x 143.2 ESRtyp 100 Hz 20 C m ESRmax 100 Hz 20 C m Zmax 10 kHz 20 C m IAC,max 100 Hz 40 C A IAC,max 100 Hz 85 C A IAC,R Ordering code 100 Hz (composition see 105 C below) A 21 14 15 8.0 4.8 4.7 4.0 3.5 3.0 42 29 20 16 12 9.4 8.0 5.3 4.5 31 22 17 13 9.3 7.6 6.4 5.6 5.1 18 25 30 30 34 34 45 57 57 11 15 18 23 26 32 38 40 50 5.3 7.4 8.8 11 13 15 18 20 24 B415*0A5159M000 B415*0A5229M000 B415*0A5339M000 B415*0A5479M000 B415*0A5689M000 B415*0A5100M000 B415*0A5150M00# B415*0A5220M00# B415*0A5330M00# 17 12 8.5 6.0 5.0 4.5 4.1 3.6 3.3 42 23 17 12 10 9.0 8.2 7.2 5.0 37 16 14 13 10 8.4 7.0 6.0 5.4 18 25 30 34 34 34 45 57 57 11 15 20 23 29 30 38 41 49 5.3 7.4 9.5 11 14 15 18 20 24 B415*0A7109M000 B415*0A7159M000 B415*0A7229M000 B415*0A7339M000 B415*0A7479M000 B415*0A7689M000 B415*0A7100M00# B415*0A7150M00# B415*0A7220M00# 30 22 14 9.5 7.0 5.5 4.8 3.3 3.3 60 44 27 19 14 11 10 5.0 5.0 64 46 16 14 14 12 9.4 7.8 6.6 15 20 28 31 34 45 45 57 57 9.2 12 17 19 25 31 35 39 48 4.4 6.0 8.1 9.1 12 15 17 19 23 B415*0A8478M000 B415*0A8688M000 B415*0A8109M000 B415*0A8159M000 B415*0A8229M000 B415*0A8339M00# B415*0A8479M00# B415*0A8689M00# B415*0A8100M00# Composition of ordering code * = Mounting style 6 = for capacitors with ring clip/clamp mounting 8 = for capacitors with threaded stud Please read Cautions and warnings and Important notes at the end of this document. #= Design 0 = for capacitors with standard inductance 3 = for capacitors with low inductance (13 nH) (only for capacitors with diameter d 64.3 mm) Page 8 of 17 B41560, B41580 Extremely compact 105 C Technical data and ordering codes CR 100 Hz 20 C F Case dimensions dxl mm VR = 100 V DC 1500 35.7 x 55.7 2200 35.7 x 80.7 3300 35.7 x 80.7 4700 35.7 x 105.7 6800 51.6 x 80.7 10000 51.6 x 105.7 15000 64.3 x 105.7 22000 76.9 x 105.7 33000 76.9 x 143.2 ESRtyp 100 Hz 20 C m ESRmax 100 Hz 20 C m Zmax 10 kHz 20 C m IAC,max 100 Hz 40 C A IAC,max 100 Hz 85 C A IAC,R Ordering code 100 Hz (composition see 105 C below) A 52 35 24 18 12 7.0 5.0 4.0 3.3 104 70 48 35 24 14 10 6.0 5.0 90 77 53 39 25 12 10 6.0 8.4 11 16 19 26 30 34 45 57 57 7.0 9.9 12 16 18 24 30 35 44 3.4 4.7 5.7 7.5 8.7 11 15 17 21 Composition of ordering code * = Mounting style 6 = for capacitors with ring clip/clamp mounting 8 = for capacitors with threaded stud Please read Cautions and warnings and Important notes at the end of this document. #= B415*0A9158M000 B415*0A9228M000 B415*0A9338M000 B415*0A9478M000 B415*0A9688M000 B415*0A9109M000 B415*0A9159M00# B415*0A9229M00# B415*0A9339M00# Design 0 = for capacitors with standard inductance 3 = for capacitors with low inductance (13 nH) (only for capacitors with diameter d 64.3 mm) Page 9 of 17 B41560, B41580 Extremely compact 105 C Useful life1) depending on ambient temperature TA under ripple current operating conditions Frequency factor of permissible ripple current IAC versus frequency f VR (V DC) 63 100 d = 35.7 mm a c d = 51.6 mm a d d = 64.3 mm a d d = 76.9 mm b e 1) Refer to chapter "General technical information, 5 Useful life" on how to interpret useful life. Please read Cautions and warnings and Important notes at the end of this document. Page 10 of 17 B41560, B41580 Extremely compact 105 C Frequency characteristics of ESR Typical behavior VR (V DC) 63 100 d = 35.7 mm a c d = 51.6 mm a d d = 64.3 mm a d d = 76.9 mm b e Impedance Z versus frequency f Typical behavior at 20 C Please read Cautions and warnings and Important notes at the end of this document. Page 11 of 17 B41560, B41580 Extremely compact 105 C Cautions and warnings Personal safety The electrolytes used by EPCOS have been optimized both with a view to the intended application and with regard to health and environmental compatibility. They do not contain any solvents that are detrimental to health, e.g. dimethyl formamide (DMF) or dimethyl acetamide (DMAC). Furthermore, some of the high-voltage electrolytes used by EPCOS are self-extinguishing. As far as possible, EPCOS does not use any dangerous chemicals or compounds to produce operating electrolytes. However, in exceptional cases, such materials must be used in order to achieve specific physical and electrical properties because no alternative materials are currently known. However, the amount of dangerous materials used in our products is limited to an absolute minimum. Materials and chemicals used in EPCOS aluminum electrolytic capacitors are continuously adapted in compliance with the EPCOS Corporate Environmental Policy and the latest EU regulations and guidelines such as RoHS, REACH/SVHC, GADSL, and ELV. MDS (Material Data Sheets) are available on the EPCOS website for all types listed in the data book. MDS for customer specific capacitors are available upon request. MSDS (Material Safety Data Sheets) are available for all of our electrolytes upon request. Nevertheless, the following rules should be observed when handling aluminum electrolytic capacitors: No electrolyte should come into contact with eyes or skin. If electrolyte does come into contact with the skin, wash the affected areas immediately with running water. If the eyes are affected, rinse them for 10 minutes with plenty of water. If symptoms persist, seek medical treatment. Avoid inhaling electrolyte vapor or mists. Workplaces and other affected areas should be well ventilated. Clothing that has been contaminated by electrolyte must be changed and rinsed in water. Please read Cautions and warnings and Important notes at the end of this document. Page 12 of 17 B41560, B41580 Extremely compact 105 C Product safety The table below summarizes the safety instructions that must be observed without fail. A detailed description can be found in the relevant sections of chapter "General technical information". Topic Safety information Polarity Make sure that polar capacitors are connected with the right polarity. Reverse voltage Voltages polarity classes should be prevented by connecting a diode. Do not mount the capacitor with the terminals (safety vent) upside down. Mounting position of screwterminal capacitors Robustness of terminals Mounting of single-ended capacitors Soldering Soldering, cleaning agents Upper category temperature Passive flammability The following maximum tightening torques must not be exceeded when connecting screw terminals: M5: 2.5 Nm M6: 4.0 Nm The internal structure of single-ended capacitors might be damaged if excessive force is applied to the lead wires. Avoid any compressive, tensile or flexural stress. Do not move the capacitor after soldering to PC board. Do not pick up the PC board by the soldered capacitor. Do not insert the capacitor on the PC board with a hole space different to the lead space specified. Do not exceed the specified time or temperature limits during soldering. Do not allow halogenated hydrocarbons to come into contact with aluminum electrolytic capacitors. Do not exceed the upper category temperature. Avoid external energy, such as fire or electricity. Please read Cautions and warnings and Important notes at the end of this document. Page 13 of 17 Reference chapter "General technical information" 1 "Basic construction of aluminum electrolytic capacitors" 3.1.6 "Reverse voltage" 11.1. "Mounting positions of capacitors with screw terminals" 11.3 "Mounting torques" 11.4 "Mounting considerations for single-ended capacitors" 11.5 "Soldering" 11.6 "Cleaning agents" 7.2 "Maximum permissible operating temperature" 8.1 "Passive flammability" B41560, B41580 Extremely compact 105 C Topic Safety information Active flammability Maintenance Avoid overload of the capacitors. Storage Make periodic inspections of the capacitors. Before the inspection, make sure that the power supply is turned off and carefully discharge the electricity of the capacitors. Do not apply any mechanical stress to the capacitor terminals. Do not store capacitors at high temperatures or high humidity. Capacitors should be stored at +5 to +35 C and a relative humidity of 75%. Breakdown strength Do not damage the insulating sleeve, especially of insulating when ring clips are used for mounting. sleeves Please read Cautions and warnings and Important notes at the end of this document. Page 14 of 17 Reference chapter "General technical information" 8.2 "Active flammability" 10 "Maintenance" 7.3 Storage conditions Reference chapter "Capacitors with screw terminals" "Screw terminals accessories" B41560, B41580 Extremely compact 105 C Symbols and terms Symbol English German C CR CS CS,T Cf d dmax ESL ESR ESRf Capacitance Rated capacitance Series capacitance Series capacitance at temperature T Capacitance at frequency f Case diameter, nominal dimension Maximum case diameter Self-inductance Equivalent series resistance Equivalent series resistance at frequency f Equivalent series resistance at temperature T Frequency Current Alternating current (ripple current) Root-mean-square value of alternating current Ripple current at frequency f Maximum permissible ripple current Rated ripple current Rated ripple current for base cooling Leakage current Operating leakage current Case length, nominal dimension Maximum case length (without terminals and mounting stud) Resistance Insulation resistance Balancing resistance Temperature Temperature difference Ambient temperature Case temperature Capacitor base temperature Time Period Service life (operating hours) Kapazitat Nennkapazitat Serienkapazitat Serienkapazitat bei Temperatur T Kapazitat bei Frequenz f Gehausedurchmesser, Nennma Maximaler Gehausedurchmesser Eigeninduktivitat Ersatzserienwiderstand Ersatzserienwiderstand bei Frequenz f ESRT f I IAC IAC,rms IAC,f IAC,max IAC,R IAC,R (B) Ileak Ileak,op l lmax R Rins Rsymm T T TA TC TB t t tb Please read Cautions and warnings and Important notes at the end of this document. Ersatzserienwiderstand bei Temperatur T Frequenz Strom Wechselstrom Wechselstrom, Effektivwert Wechselstrom bei Frequenz f Maximal zulassiger Wechselstrom Nennwechselstrom Nennwechselstromstrom fur Bodenkuhlung Reststrom Betriebsreststrom Gehauselange, Nennma Maximale Gehauselange (ohne Anschlusse und Gewindebolzen) Widerstand Isolationswiderstand Symmetrierwiderstand Temperatur Temperaturdifferenz Umgebungstemperatur Gehausetemperatur Temperatur des Becherbodens Zeit Zeitraum Brauchbarkeitsdauer (Betriebszeit) Page 15 of 17 B41560, B41580 Extremely compact 105 C Symbol V VF Vop VR VS XC XL Z ZT tan 0 r English Voltage Forming voltage Operating voltage Rated voltage, DC voltage Surge voltage Capacitive reactance Inductive reactance Impedance Impedance at temperature T Dissipation factor Failure rate Absolute permittivity Relative permittivity Angular velocity; 2 f German Spannung Formierspannung Betriebsspannung Nennspannung, Gleichspannung Spitzenspannung Kapazitiver Blindwiderstand Induktiver Blindwiderstand Scheinwiderstand Scheinwiderstand bei Temperatur T Verlustfaktor Ausfallrate Elektrische Feldkonstante Dielektrizitatszahl Kreisfrequenz; 2 f Note All dimensions are given in mm. Please read Cautions and warnings and Important notes at the end of this document. Page 16 of 17 Important notes The following applies to all products named in this publication: 1. Some parts of this publication contain statements about the suitability of our products for certain areas of application. These statements are based on our knowledge of typical requirements that are often placed on our products in the areas of application concerned. We nevertheless expressly point out that such statements cannot be regarded as binding statements about the suitability of our products for a particular customer application. As a rule, EPCOS is either unfamiliar with individual customer applications or less familiar with them than the customers themselves. For these reasons, it is always ultimately incumbent on the customer to check and decide whether an EPCOS product with the properties described in the product specification is suitable for use in a particular customer application. 2. We also point out that in individual cases, a malfunction of electronic components or failure before the end of their usual service life cannot be completely ruled out in the current state of the art, even if they are operated as specified. In customer applications requiring a very high level of operational safety and especially in customer applications in which the malfunction or failure of an electronic component could endanger human life or health (e.g. in accident prevention or lifesaving systems), it must therefore be ensured by means of suitable design of the customer application or other action taken by the customer (e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained by third parties in the event of malfunction or failure of an electronic component. 3. The warnings, cautions and product-specific notes must be observed. 4. In order to satisfy certain technical requirements, some of the products described in this publication may contain substances subject to restrictions in certain jurisdictions (e.g. because they are classed as hazardous). Useful information on this will be found in our Material Data Sheets on the Internet (www.epcos.com/material). Should you have any more detailed questions, please contact our sales offices. 5. We constantly strive to improve our products. Consequently, the products described in this publication may change from time to time. The same is true of the corresponding product specifications. Please check therefore to what extent product descriptions and specifications contained in this publication are still applicable before or when you place an order. We also reserve the right to discontinue production and delivery of products. Consequently, we cannot guarantee that all products named in this publication will always be available. The aforementioned does not apply in the case of individual agreements deviating from the foregoing for customer-specific products. 6. Unless otherwise agreed in individual contracts, all orders are subject to the current version of the "General Terms of Delivery for Products and Services in the Electrical Industry" published by the German Electrical and Electronics Industry Association (ZVEI). 7. The trade names EPCOS, BAOKE, Alu-X, CeraDiode, CeraLink, CSMP, CSSP, CTVS, DeltaCap, DigiSiMic, DSSP, FilterCap, FormFit, MiniBlue, MiniCell, MKD, MKK, MLSC, MotorCap, PCC, PhaseCap, PhaseCube, PhaseMod, PhiCap, SIFERRIT, SIFI, SIKOREL, SilverCap, SIMDAD, SiMic, SIMID, SineFormer, SIOV, SIP5D, SIP5K, ThermoFuse, WindCap are trademarks registered or pending in Europe and in other countries. Further information will be found on the Internet at www.epcos.com/trademarks. Page 17 of 17 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: EPCOS / TDK: B41560A5159M000 B41560A5339M000 B41560A5689M000 B41560A5150M000 B41560A5220M000 B41560A5330M000 B41560A7109M000 B41560A7159M000 B41560A7229M000 B41560A7339M000 B41560A7689M000 B41560A7150M000 B41560A7220M000 B41560A8688M000 B41560A8159M000 B41560A8689M000 B41560A9158M000 B41560A9338M000 B41560A9339M000 B41580A5159M000 B41580A5229M000 B41580A5339M000 B41580A5479M000 B41580A5689M000 B41580A5100M000 B41580A5150M000 B41580A5220M000 B41580A5330M000 B41580A7109M000 B41580A7159M000 B41580A7229M000 B41580A7339M000 B41580A7479M000 B41580A7689M000 B41580A7100M000 B41580A7150M000 B41580A7220M000 B41580A8478M000 B41580A8688M000 B41580A8109M000 B41580A8159M000 B41580A8229M000 B41580A8339M000 B41580A8479M000 B41580A8689M000 B41580A8100M000 B41580A9158M000 B41580A9228M000 B41580A9338M000 B41580A9478M000 B41580A9688M000 B41580A9109M000 B41580A9159M000 B41580A9229M000 B41580A9339M000 B41560A5100M B41560A5229M B41560A5479M B41560A7100M B41560A7479M B41560A8100M B41560A8109M B41560A8229M B41560A8339M B41560A8478M B41560A8479M B41560A9109M B41560A9159M B41560A9228M B41560A9229M B41560A9478M B41560A9688M B41560A5150M003 B41560A7100M003 B41560A8339M003 B41560A8479M003 B41560A9159M003 B41580A5150M003 B41580A7100M003 B41580A8339M003 B41580A8479M003 B41580A9159M003 B41560A5220M003 B41560A5330M003 B41560A7150M003 B41560A7220M003 B41560A8100M003 B41560A8689M003 B41560A9229M003 B41560A9339M003 B41580A5220M003 B41580A5330M003 B41580A7150M003 B41580A7220M003 B41580A8100M003 B41580A8689M003 B41580A9229M003 B41580A9339M003