B41580A7220M003 - EPCOS / TDK

Aluminum electrolytic capacitors

Capacitors with screw terminals

Series/Type: B41560, B41580

Date: November 2012

information contained therein without EPCOS' prior express consent is prohibited.

EPCOS AG is a TDK Group Company.

Long-life grade capacitors

Applications

General industrial electronics

Professional power supplies

Features

High reliability, extremely good electrical characteristics

High CV product, i.e. extremely compact

High ripple current capability

All-welded construction ensures reliable electrical contact

Version with low-inductance design available

RoHS-compatible

Construction

Charge-discharge proof, polar

Aluminum case with insulating sleeve

Poles with screw terminal connections

Mounting with ring clips, clamps or threaded stud

The bases of types with threaded stud are not insulated

B41560 B41580

Capacitors with screw terminals B41560, B41580

Extremely compact 105 °C

Page 2 of 17Please read Cautions and warnings and

Important notes at the end of this document.

1) Refer to chapter "General technical information, 5 Useful life" on how to interpret useful life.

Specifications and characteristics in brief

Rated voltage VR

Surge voltage VS

25 ... 100 V DC

1.15 VR

Rated capacitance CR

Capacitance tolerance

1500 ... 330000 µF

±20% M

Leakage current Ileak

(20 °C, 5 min)

Self-inductance ESL Approx. 20 nH

Capacitors with low-inductance design:

d≥64.3 mm: approx. 13 nH

Useful life1) Requirements:

105 °C; VR; IAC,R > 3000 h ∆C/C ≤ ±45% of initial value

85 °C; VR; IAC,max > 6000 h ESR ≤3 times initial specified limit

40 °C; VR; 2.2 IAC,R > 250000 h Ileak ≤initial specified limit

Voltage endurance test Post test requirements:

105 °C; VR2000 h ∆C/C ≤ ±15% of initial value

ESR ≤1.3 times initial specified limit

Ileak ≤initial specified limit

Vibration resistance test To IEC 60068-2-6, test Fc:

Frequency range 10 ... 55 Hz, displacement amplitude 0.75 mm,

acceleration max. 10 g, duration 3 ×2 h.

Capacitor mounted by its body which is rigidly clamped to the work

surface.

IEC climatic category To IEC 60068-1:

40/105/56 (40 °C/+105 °C/56 days damp heat test)

Detail specification

Sectional specification

Similar to CECC 30301-810

IEC 60384-4

Ripple current capability

Due to the ripple current capability of the contact elements, the following current upper limits must

not be exceeded:

Capacitor diameter ≤51.6 mm 64.3 mm 76.9 mm

IAC,max 34 A 45 A 57 A

B41560, B41580

Extremely compact 105 °C

Page 3 of 17Please read Cautions and warnings and

Important notes at the end of this document.

Dimensional drawings

B41560

Ring clip/clamp mounting

B41580

Threaded stud mounting

Screw terminals with UNF threads are available upon request.

Dimensions and weights

Ter-

minal

Dimensions (mm) with insulating sleeve Approx.

weight (g)

d l ±1 l1±1 l2+0/1 d1d2max. a +0.2/0.4

M5 35.7 +0/0.8 55.7 62.2 13 M8 8.2 12.7 65

M5 35.7 +0/0.8 80.7 87.2 13 M8 8.2 12.7 105

M5 35.7 +0/0.8 105.7 112.2 13 M8 8.2 12.7 135

M5 51.6 +0/0.8 80.7 87.2 17 M12 10.2 22.2 220

M5 51.6 +0/0.8 105.7 112.2 17 M12 10.2 22.2 280

M5 64.3 +0/0.8 105.7 112.2 17 M12 13.2 28.5 440

M6 76.9 +0/0.7 105.7 111.5 17 M12 17.7 31.7 620

M6 76.9 +0/0.7 143.2 149.0 17 M12 17.7 31.7 840

For low-inductance design the following deviation applies:

d = 64.3 mm: l10.7 mm

B41560, B41580

Extremely compact 105 °C

Page 4 of 17Please read Cautions and warnings and

Important notes at the end of this document.

Packing

Capacitor

diameter d (mm)

length l

(mm)

Packing units

(pcs.)

Capacitor

diameter d (mm)

length l

(mm)

Packing units

(pcs.)

35.7 all 36 64.3 all 25

51.6 all 36 76.9 all 16

For ecological reasons the packing is pure cardboard.

B41560, B41580

Extremely compact 105 °C

Page 5 of 17Please read Cautions and warnings and

Important notes at the end of this document.

Special design

Low-inductance design

Design Identification in third

block of ordering code

Remark

Low inductance (13 nH) M003 For capacitors with diameter d ≥64.3 mm

Accessories

The following items are included in the delivery package, but are not fastened to the capacitors:

Thread Toothed

washers

Screws/nuts Maximum

torque

For terminals M5 A 5.1 DIN 6797 DIN 7985 / ISO 7045-M5 ×10-5.6-Z 2.5 Nm

thread depth

t≥8 mm

M6 A 6.4 DIN 6797 DIN 7985 / ISO 7045-M6 ×12-5.6-Z 4.0 Nm

thread depth

t≥9.5 mm

For mounting M8 J 8.2 DIN 6797 Hex nut BM 8 DIN 439 4 Nm

M12 J 12.5 DIN 6797 Hex nut BM 12 DIN 439 10 Nm

The following items must be ordered separately. For details, refer to chapter "Capacitors with

screw terminals Accessories".

Item Type

Ring clips B44030

Clamps for capacitors with d ≥64.3 mm B44030

Insulating parts B44020

B41560, B41580

Extremely compact 105 °C

Page 6 of 17Please read Cautions and warnings and

Important notes at the end of this document.

Overview of available types

VR(V DC) 25 40 63 100

Case dimensions d ×l (mm)

CR(µF)

1500 35.7 ×55.7

2200 35.7 ×80.7

3300 35.7 ×80.7

4700 35.7 ×55.7 35.7 ×105.7

6800 35.7 ×80.7 51.6 ×80.7

10000 35.7 ×55.7 35.7 ×105.7 51.6 ×105.7

15000 35.7 ×55.7 35.7 ×80.7 51.6 ×80.7 64.3 ×105.7

22000 35.7 ×80.7 35.7 ×105.7 51.6 ×105.7 76.9 ×105.7

33000 35.7 ×80.7 51.6 ×80.7 64.3 ×105.7 76.9 ×143.2

47000 35.7 ×105.7 51.6 ×105.7 64.3 ×105.7

68000 51.6 ×80.7 51.6 ×105.7 76.9 ×105.7

100000 51.6 ×105.7 64.3 ×105.7 76.9 ×143.2

150000 64.3 ×105.7 76.9 ×105.7

220000 76.9 ×105.7 76.9 ×143.2

330000 76.9 ×143.2

The capacitance and voltage ratings listed above are available in different cases upon request.

Other voltage and capacitance ratings are also available upon request.

B41560, B41580

Extremely compact 105 °C

Page 7 of 17Please read Cautions and warnings and

Important notes at the end of this document.

Technical data and ordering codes

100 Hz

20 °C

µF

Case

dimensions

d×l

ESRtyp

100 Hz

20 °C

mΩ

ESRmax

100 Hz

20 °C

mΩ

Zmax

10 kHz

20 °C

mΩ

IAC,max

100 Hz

40 °C

IAC,max

100 Hz

85 °C

IAC,R

100 Hz

105 °C

Ordering code

(composition see

below)

Composition of ordering code

* = Mounting style # = Design

6 = for capacitors with ring clip/clamp mounting

8 = for capacitors with threaded stud

0 = for capacitors with standard inductance

3 = for capacitors with low inductance (13 nH)

(only for capacitors with diameter d ≥64.3

mm)

VR= 25 V DC

15000 35.7 ×55.7 21 42 31 18 11 5.3 B415*0A5159M000

22000 35.7 ×80.7 14 29 22 25 15 7.4 B415*0A5229M000

33000 35.7 ×80.7 15 20 17 30 18 8.8 B415*0A5339M000

47000 35.7 ×105.7 8.0 16 13 30 23 11 B415*0A5479M000

68000 51.6 ×80.7 4.8 12 9.3 34 26 13 B415*0A5689M000

100000 51.6 ×105.7 4.7 9.4 7.6 34 32 15 B415*0A5100M000

150000 64.3 ×105.7 4.0 8.0 6.4 45 38 18 B415*0A5150M00#

220000 76.9 ×105.7 3.5 5.3 5.6 57 40 20 B415*0A5220M00#

330000 76.9 ×143.2 3.0 4.5 5.1 57 50 24 B415*0A5330M00#

VR= 40 V DC

10000 35.7 ×55.7 17 42 37 18 11 5.3 B415*0A7109M000

15000 35.7 ×80.7 12 23 16 25 15 7.4 B415*0A7159M000

22000 35.7 ×105.7 8.5 17 14 30 20 9.5 B415*0A7229M000

33000 51.6 ×80.7 6.0 12 13 34 23 11 B415*0A7339M000

47000 51.6 ×105.7 5.0 10 10 34 29 14 B415*0A7479M000

68000 51.6 ×105.7 4.5 9.0 8.4 34 30 15 B415*0A7689M000

100000 64.3 ×105.7 4.1 8.2 7.0 45 38 18 B415*0A7100M00#

150000 76.9 ×105.7 3.6 7.2 6.0 57 41 20 B415*0A7150M00#

220000 76.9 ×143.2 3.3 5.0 5.4 57 49 24 B415*0A7220M00#

VR= 63 V DC

4700 35.7 ×55.7 30 60 64 15 9.2 4.4 B415*0A8478M000

6800 35.7 ×80.7 22 44 46 20 12 6.0 B415*0A8688M000

10000 35.7 ×105.7 14 27 16 28 17 8.1 B415*0A8109M000

15000 51.6 ×80.7 9.5 19 14 31 19 9.1 B415*0A8159M000

22000 51.6 ×105.7 7.0 14 14 34 25 12 B415*0A8229M000

33000 64.3 ×105.7 5.5 11 12 45 31 15 B415*0A8339M00#

47000 64.3 ×105.7 4.8 10 9.4 45 35 17 B415*0A8479M00#

68000 76.9 ×105.7 3.3 5.0 7.8 57 39 19 B415*0A8689M00#

100000 76.9 ×143.2 3.3 5.0 6.6 57 48 23 B415*0A8100M00#

B41560, B41580

Extremely compact 105 °C

Page 8 of 17Please read Cautions and warnings and

Important notes at the end of this document.

Technical data and ordering codes

100 Hz

20 °C

µF

Case

dimensions

d×l

ESRtyp

100 Hz

20 °C

mΩ

ESRmax

100 Hz

20 °C

mΩ

Zmax

10 kHz

20 °C

mΩ

IAC,max

100 Hz

40 °C

IAC,max

100 Hz

85 °C

IAC,R

100 Hz

105 °C

Ordering code

(composition see

below)

Composition of ordering code

* = Mounting style # = Design

6 = for capacitors with ring clip/clamp mounting

8 = for capacitors with threaded stud

0 = for capacitors with standard inductance

3 = for capacitors with low inductance (13 nH)

(only for capacitors with diameter d ≥64.3

mm)

VR= 100 V DC

1500 35.7 ×55.7 52 104 90 11 7.0 3.4 B415*0A9158M000

2200 35.7 ×80.7 35 70 77 16 9.9 4.7 B415*0A9228M000

3300 35.7 ×80.7 24 48 53 19 12 5.7 B415*0A9338M000

4700 35.7 ×105.7 18 35 39 26 16 7.5 B415*0A9478M000

6800 51.6 ×80.7 12 24 25 30 18 8.7 B415*0A9688M000

10000 51.6 ×105.7 7.0 14 12 34 24 11 B415*0A9109M000

15000 64.3 ×105.7 5.0 10 10 45 30 15 B415*0A9159M00#

22000 76.9 ×105.7 4.0 6.0 6.0 57 35 17 B415*0A9229M00#

33000 76.9 ×143.2 3.3 5.0 8.4 57 44 21 B415*0A9339M00#

B41560, B41580

Extremely compact 105 °C

Page 9 of 17Please read Cautions and warnings and

Important notes at the end of this document.

1) Refer to chapter "General technical information, 5 Useful life" on how to interpret useful life.

Useful life1)

depending on ambient temperature TAunder ripple current operating conditions

Frequency factor of permissible ripple current IAC versus frequency f

VR(V DC) ≤63 100

d = 35.7 mm a c

d = 51.6 mm a d

d = 64.3 mm a d

d = 76.9 mm b e

B41560, B41580

Extremely compact 105 °C

Page 10 of 17Please read Cautions and warnings and

Important notes at the end of this document.

Frequency characteristics of ESR

Typical behavior

VR(V DC) ≤63 100

d = 35.7 mm a c

d = 51.6 mm a d

d = 64.3 mm a d

d = 76.9 mm b e

Impedance Z versus frequency f

Typical behavior at 20 °C

B41560, B41580

Extremely compact 105 °C

Page 11 of 17Please read Cautions and warnings and

Important notes at the end of this document.

Cautions and warnings

Personal safety

The electrolytes used by EPCOS have been optimized both with a view to the intended

application and with regard to health and environmental compatibility. They do not contain any

solvents that are detrimental to health, e.g. dimethyl formamide (DMF) or dimethyl acetamide

(DMAC).

Furthermore, some of the high-voltage electrolytes used by EPCOS are self-extinguishing.

As far as possible, EPCOS does not use any dangerous chemicals or compounds to produce

operating electrolytes. However, in exceptional cases, such materials must be used in order to

achieve specific physical and electrical properties because no alternative materials are currently

known. However, the amount of dangerous materials used in our products is limited to an

absolute minimum.

Materials and chemicals used in EPCOS aluminum electrolytic capacitors are continuously

adapted in compliance with the EPCOS Corporate Environmental Policy and the latest EU

regulations and guidelines such as RoHS, REACH/SVHC, GADSL, and ELV.

MDS (Material Data Sheets) are available on the EPCOS website for all types listed in the data

book. MDS for customer specific capacitors are available upon request.

MSDS (Material Safety Data Sheets) are available for all of our electrolytes upon request.

Nevertheless, the following rules should be observed when handling aluminum electrolytic

capacitors: No electrolyte should come into contact with eyes or skin. If electrolyte does come

into contact with the skin, wash the affected areas immediately with running water. If the eyes are

affected, rinse them for 10 minutes with plenty of water. If symptoms persist, seek medical

treatment. Avoid inhaling electrolyte vapor or mists. Workplaces and other affected areas should

be well ventilated. Clothing that has been contaminated by electrolyte must be changed and

rinsed in water.

B41560, B41580

Extremely compact 105 °C

Page 12 of 17Please read Cautions and warnings and

Important notes at the end of this document.

Product safety

The table below summarizes the safety instructions that must be observed without fail. A detailed

description can be found in the relevant sections of chapter "General technical information".

Topic Safety information Reference

chapter "General

technical information"

Polarity Make sure that polar capacitors are connected

with the right polarity.

"Basic construction of

aluminum electrolytic

capacitors"

Reverse voltage Voltages polarity classes should be prevented by

connecting a diode.

3.1.6

"Reverse voltage"

Mounting

position of screw-

terminal capacitors

Do not mount the capacitor with the terminals

(safety vent) upside down.

11.1.

"Mounting positions of

capacitors with screw

terminals"

Robustness of

terminals

The following maximum tightening torques must

not be exceeded when connecting screw

terminals:

M5: 2.5 Nm

M6: 4.0 Nm

11.3

"Mounting torques"

Mounting of

single-ended

capacitors

The internal structure of single-ended capacitors

might be damaged if excessive force is applied to

the lead wires.

Avoid any compressive, tensile or flexural stress.

Do not move the capacitor after soldering to PC

board.

Do not pick up the PC board by the soldered

capacitor.

Do not insert the capacitor on the PC board with a

hole space different to the lead space specified.

11.4

"Mounting

considerations for

single-ended capacitors"

Soldering Do not exceed the specified time or temperature

limits during soldering.

11.5

"Soldering"

Soldering,

cleaning agents

Do not allow halogenated hydrocarbons to come

into contact with aluminum electrolytic capacitors.

11.6

"Cleaning agents"

Upper category

temperature

Do not exceed the upper category temperature. 7.2

"Maximum permissible

operating temperature"

Passive

flammability

Avoid external energy, such as fire or electricity. 8.1

"Passive flammability"

B41560, B41580

Extremely compact 105 °C

Page 13 of 17Please read Cautions and warnings and

Important notes at the end of this document.

Topic Safety information Reference

chapter "General

technical information"

Active

flammability

Avoid overload of the capacitors. 8.2

"Active flammability"

Maintenance Make periodic inspections of the capacitors.

Before the inspection, make sure that the power

supply is turned off and carefully discharge the

electricity of the capacitors.

Do not apply any mechanical stress to the

capacitor terminals.

"Maintenance"

Storage Do not store capacitors at high temperatures or

high humidity. Capacitors should be stored at

+5 to +35 °C and a relative humidity of ≤75%.

7.3

Storage conditions

Reference

chapter "Capacitors with

screw terminals"

Breakdown strength

of insulating

sleeves

Do not damage the insulating sleeve, especially

when ring clips are used for mounting.

"Screw terminals 

accessories"

B41560, B41580

Extremely compact 105 °C

Page 14 of 17Please read Cautions and warnings and

Important notes at the end of this document.

Symbols and terms

Symbol English German

C Capacitance Kapazität

CRRated capacitance Nennkapazität

CSSeries capacitance Serienkapazität

CS,T Series capacitance at temperature T Serienkapazität bei Temperatur T

CfCapacitance at frequency f Kapazität bei Frequenz f

d Case diameter, nominal dimension Gehäusedurchmesser, Nennmaß

dmax Maximum case diameter Maximaler Gehäusedurchmesser

ESL Self-inductance Eigeninduktivität

ESR Equivalent series resistance Ersatzserienwiderstand

ESRfEquivalent series resistance at

frequency f

Ersatzserienwiderstand bei Frequenz f

ESRTEquivalent series resistance at

temperature T

Ersatzserienwiderstand bei Temperatur T

f Frequency Frequenz

I Current Strom

IAC Alternating current (ripple current) Wechselstrom

IAC,rms Root-mean-square value of alternating

current

Wechselstrom, Effektivwert

IAC,f Ripple current at frequency f Wechselstrom bei Frequenz f

IAC,max Maximum permissible ripple current Maximal zulässiger Wechselstrom

IAC,R Rated ripple current Nennwechselstrom

IAC,R (B) Rated ripple current for base cooling Nennwechselstromstrom für Bodenkühlung

Ileak Leakage current Reststrom

Ileak,op Operating leakage current Betriebsreststrom

l Case length, nominal dimension Gehäuselänge, Nennmaß

lmax Maximum case length (without

terminals and mounting stud)

Maximale Gehäuselänge (ohne Anschlüsse

und Gewindebolzen)

R Resistance Widerstand

Rins Insulation resistance Isolationswiderstand

Rsymm Balancing resistance Symmetrierwiderstand

T Temperature Temperatur

∆T Temperature difference Temperaturdifferenz

TAAmbient temperature Umgebungstemperatur

TCCase temperature Gehäusetemperatur

TBCapacitor base temperature Temperatur des Becherbodens

t Time Zeit

∆t Period Zeitraum

tbService life (operating hours) Brauchbarkeitsdauer (Betriebszeit)

B41560, B41580

Extremely compact 105 °C

Page 15 of 17Please read Cautions and warnings and

Important notes at the end of this document.

Symbol English German

V Voltage Spannung

VFForming voltage Formierspannung

Vop Operating voltage Betriebsspannung

VRRated voltage, DC voltage Nennspannung, Gleichspannung

VSSurge voltage Spitzenspannung

XCCapacitive reactance Kapazitiver Blindwiderstand

XLInductive reactance Induktiver Blindwiderstand

Z Impedance Scheinwiderstand

ZTImpedance at temperature T Scheinwiderstand bei Temperatur T

tan δDissipation factor Verlustfaktor

λFailure rate Ausfallrate

ε0Absolute permittivity Elektrische Feldkonstante

εrRelative permittivity Dielektrizitätszahl

ωAngular velocity; 2 πf Kreisfrequenz; 2 πf

Note

All dimensions are given in mm.

B41560, B41580

Extremely compact 105 °C

Page 16 of 17Please read Cautions and warnings and

Important notes at the end of this document.

The following applies to all products named in this publication:

1. Some parts of this publication contain statements about the suitability of our products for

certain areas of application. These statements are based on our knowledge of typical re-

quirements that are often placed on our products in the areas of application concerned. We

nevertheless expressly point out that such statements cannot be regarded as binding

statements about the suitability of our products for a particular customer application.

As a rule, EPCOS is either unfamiliar with individual customer applications or less familiar

with them than the customers themselves. For these reasons, it is always ultimately incum-

bent on the customer to check and decide whether an EPCOS product with the properties de-

scribed in the product specification is suitable for use in a particular customer application.

2. We also point out that in individual cases, a malfunction of electronic components or

failure before the end of their usual service life cannot be completely ruled out in the

current state of the art, even if they are operated as specified. In customer applications

requiring a very high level of operational safety and especially in customer applications in

which the malfunction or failure of an electronic component could endanger human life or

health (e.g. in accident prevention or lifesaving systems), it must therefore be ensured by

means of suitable design of the customer application or other action taken by the customer

(e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained by

third parties in the event of malfunction or failure of an electronic component.

3. The warnings, cautions and product-specific notes must be observed.

4. In order to satisfy certain technical requirements, some of the products described in this

publication may contain substances subject to restrictions in certain jurisdictions (e.g.

because they are classed as hazardous). Useful information on this will be found in our Ma-

terial Data Sheets on the Internet (www.epcos.com/material). Should you have any more de-

tailed questions, please contact our sales offices.

5. We constantly strive to improve our products. Consequently, the products described in this

publication may change from time to time. The same is true of the corresponding product

specifications. Please check therefore to what extent product descriptions and specifications

contained in this publication are still applicable before or when you place an order. We also

reserve the right to discontinue production and delivery of products. Consequently, we

cannot guarantee that all products named in this publication will always be available. The

aforementioned does not apply in the case of individual agreements deviating from the fore-

going for customer-specific products.

6. Unless otherwise agreed in individual contracts, all orders are subject to the current ver-

sion of the "General Terms of Delivery for Products and Services in the Electrical In-

dustry" published by the German Electrical and Electronics Industry Association

(ZVEI).

7. The trade names EPCOS, BAOKE, Alu-X, CeraDiode, CeraLink, CSMP, CSSP, CTVS,

DeltaCap, DigiSiMic, DSSP, FilterCap, FormFit, MiniBlue, MiniCell, MKD, MKK, MLSC,

MotorCap, PCC, PhaseCap, PhaseCube, PhaseMod, PhiCap, SIFERRIT, SIFI, SIKOREL,

SilverCap, SIMDAD, SiMic, SIMID, SineFormer, SIOV, SIP5D, SIP5K, ThermoFuse,

WindCap are trademarks registered or pending in Europe and in other countries. Further

information will be found on the Internet at www.epcos.com/trademarks.

Important notes

Page 17 of 17

Mouser Electronics

Authorized Distributor

Click to View Pricing, Inventory, Delivery & Lifecycle Information:

EPCOS / TDK:

B41560A5159M000 B41560A5339M000 B41560A5689M000 B41560A5150M000 B41560A5220M000

B41560A5330M000 B41560A7109M000 B41560A7159M000 B41560A7229M000 B41560A7339M000

B41560A7689M000 B41560A7150M000 B41560A7220M000 B41560A8688M000 B41560A8159M000

B41560A8689M000 B41560A9158M000 B41560A9338M000 B41560A9339M000 B41580A5159M000

B41580A5229M000 B41580A5339M000 B41580A5479M000 B41580A5689M000 B41580A5100M000

B41580A5150M000 B41580A5220M000 B41580A5330M000 B41580A7109M000 B41580A7159M000

B41580A7229M000 B41580A7339M000 B41580A7479M000 B41580A7689M000 B41580A7100M000

B41580A7150M000 B41580A7220M000 B41580A8478M000 B41580A8688M000 B41580A8109M000

B41580A8159M000 B41580A8229M000 B41580A8339M000 B41580A8479M000 B41580A8689M000

B41580A8100M000 B41580A9158M000 B41580A9228M000 B41580A9338M000 B41580A9478M000

B41580A9688M000 B41580A9109M000 B41580A9159M000 B41580A9229M000 B41580A9339M000

B41560A5100M B41560A5229M B41560A5479M B41560A7100M B41560A7479M B41560A8100M

B41560A8109M B41560A8229M B41560A8339M B41560A8478M B41560A8479M B41560A9109M

B41560A9159M B41560A9228M B41560A9229M B41560A9478M B41560A9688M B41560A5150M003

B41560A7100M003 B41560A8339M003 B41560A8479M003 B41560A9159M003 B41580A5150M003

B41580A7100M003 B41580A8339M003 B41580A8479M003 B41580A9159M003 B41560A5220M003

B41560A5330M003 B41560A7150M003 B41560A7220M003 B41560A8100M003 B41560A8689M003

B41560A9229M003 B41560A9339M003 B41580A5220M003 B41580A5330M003 B41580A7150M003

B41580A7220M003 B41580A8100M003 B41580A8689M003 B41580A9229M003 B41580A9339M003