*1566 Covers- PRINTER 12/4/06 10:58 AM Page 1 EMI Filters and Filtered Interconnects CERTIFIED *1566 Covers- PRINTER 12/4/06 10:58 AM Page 2 Spectrum Control Inc... EMI Filters and Filtered Interconnects Since its founding in 1968, Spectrum Control has focused on being a total solutions provider in the suppression or elimination of electromagnetic interference (EMI). Through recent acquisitions, Spectrum Control now offers the industry's broadest line of EMI/RFI filters, capacitors, surface mount filters and inductors, filtered arrays, filtered connectors, filtered datacom connectors, power products, power distribution filters and EMC testing services. Spectrum Control is committed to providing an integrated approach to EMC problem solving by offering customers comprehensive consulting, diagnostic testing and manufacturing services. Products from Spectrum Surface Mount Filters & Inductors Low Pass Filters Filtered Arrays Filtered Connectors Control are used in all major electronics markets including telecommunications, medical, aerospace avionics and industrial electronics, as well as industrial appliances. Gaskets & Shielding CERTIFIED 2 *1566 PRINTER 03-62 12/4/06 9:05 AM Page 1 A Control Products Systems Company Spectrum Control Inc... & Pages * Ferrite Chip Beads Surface Mount Filters & Inductors * Ferrite Inductors * Three Terminal Chip EMI Filters * High Current Power SMD EMI Filters * Ceramic Inductors * LC Type Chips * High Frequency Thru-Hole PCB Filters * Square Surface Mount EMI Filters * MLFT Filters * Solder-in Filters Low Pass Filters * Resin Sealed Bolt-in Filters * Easy Mate(R) Filter Plates Filtered Arrays 19-62 63-102 * High Current/High Voltage Resin Sealed Filters * Hermetically Sealed Case Filters 103-127 * PCB Mount Filtered Terminal Blocks * Bolt-in Filter Plates * Custom Filter Plates & Terminal Blocks * Barrier Strip Filtered Terminal Blocks Filtered Connectors QuietshieldTM Gaskets & Shielding * Series F Ferrite Filtered Connectors * Series 600 Hi-Density Filtered Connectors * Series 100 Chip-Cap Filtered Connectors * Series 700 High Performance Filtered Connectors * Series 500 Low Profile Feed-thru Connectors * Filtered Combo D-Subminiature Connectors * Quietshield "D" Profile Gaskets * Quietshield "L" Profile Gaskets * Quietshield "P" Profile Gaskets * I/O Gaskets - "D" * Clips * Quietshield "R" Profile Gaskets * Series E (ESD/EFT) Transient Protected Connectors 128-232 * Datacom Connectors * Custom Filtered Connectors 233-243 * Custom Shielding Products * EMI Shielding Tapes * Military Cross Reference 244-257 * SCI/Amp Cross Reference Appendix * Part Number Index * www.spectrumcontrol.com Online tools SPECTRUM CONTROL INC. * 8031 Avonia Rd. * Fairview, PA 16415 * Phone: 814-474-2207 * Fax: 814-474-2208 * Web site: www.spectrumcontrol.com SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 3 *1566 PRINTER 03-62 12/4/06 9:05 AM Page 2 EMI Filters and Filtered Interconnects Selection Guide SURFACE MOUNT FILTERS & INDUCTORS Ferrite Chip Beads and Power Beads Applications Ferrite Inductors Ceramic Chip Inductors Computers, printers, scanners, LAN & WAN equipment, telecommunications, radar, consumer electronics, PDAs, GPS and modems Computers, disk drives, telecommunications, test and measurement equipment, PDAs, GPS and modems RF amplifiers, repeaters, multiplexers, pagers, radar detectors, VCO and cellular phones Cellular telephones and base stations, telecommunication equipment, computer and peripheral equipment, digital AV equipment such as TV, VCR, and DVD Easy installation Easy installation Nickel barrier with solder coated termination offers excellent solderability Easy installation Nickel barrier with solder coated termination offers excellent solderability Three Terminal Ceramic EMI Filter Chips - Superior termination bonding strength Design flexibility Available in EIA (EIAJ) sizes 0402 (1005), 0603 (1608) and 0805 (2012) Superior filtering characteristics Nickel barrier with solder coated termination offers excellent solderability Design flexibility Available in EIA (EIAJ) sizes 0402 (1005), 0603 (1608), 0805 (2012), 1206 (3216), 1806 (4516) and 1812 (4532) Features/ Benefits Tape and reel packaging Available in standard chip beads or power beads Performance Closed magnetic path and high reliability Provides EMI attenuation without grounding Design flexibility Available in EIA (EIAJ) sizes 0603 (1608), 0805 (2012) and 1206 (3216) Tape and reel packaging Small footprint compared to wirewound inductors Performance Monolithic structure for closed magnetic path eliminates crosstalk and provides high reliability Inductance .047 to 47 H Chip Beads Impedance From 5 to 2500 Impedance From 7 to 600 Current Rating from 0.5 to 6 Amps Temperature range -55C to +125C Tape and reel packaging Performance Closed magnetic path Available in 0805, 1205, and 1806 sizes LC Type Ceramic EMI Filter Chips - Monolithic construction of dielectric and ferrite materials Non-polar, surface mountable Available in 0805 and 1206 sizes Three Terminal Ceramic EMI Filter Chips - Higher inductances available (consult factory) Self resonance (min.) frequency 33 to 320 MHz Non-polar, surface mountable Ideally suited for high frequency signal lines Reliability High reliability over operating temperature and humidity ranges Inductance 1.0 to 100 nH Q range 10 - 50 Power Beads Performance Characteristics Three Terminal and LC Filter Chips Voltage - Up to 100 VDC Current - Up to 2 Amps Temperature range -40C to +125C Capacitance - Up to 220,00 pF Max. current range 15 to 300 mA LC Type Ceramic EMI Filter Chips - Temperature range -25C to +85C Cut-off frequency - Up to 220 MHz Voltage - 25 VDC Current - 100 mA For data sheets on the product you're looking for, enter the dedicated URL 4 Pages 22-35 Pages 36-39 www.spectrumcontrol.com/beads www.spectrumcontrol.com/ferind Pages 40-43 www.spectrumcontrol.com/chipind Pages 48-55 www.spectrumcontrol.com/lcfil SPECTRUM CONTROL INC. * 8031 Avonia Rd. * Fairview, PA 16415 * Phone: 814-474-2207 * Fax: 814-474-2208 * Web site: www.spectrumcontrol.com SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 *1566 PRINTER 03-62 12/4/06 9:05 AM Page 3 EMI Filters and Filtered Interconnects Selection Guide LOW PASS FILTERS Power Surface Mount (PSM) Square Surface Mount (SSM) Filters Resin Sealed/ Solder-in Capacitors and Filters Hermetically Sealed Filters and Capacitors Power amplifiers, power supplies, temperature and motor controls, high current bus lines and driver circuits Ideal for microwave applications such as attenuators and oscillators. Perform well in high impedance circuits where large capacitance values are not practical Telecommunications equipment, transceivers, microwave filters, industrial control systems, multi-circuit filter assemblies Power supplies, signal lines, rocket ignitors, aerospace, military/secure communications, medical equipment multisection filters, and mining and oil drilling exploration Current rating - PSM - 20 Amps (FT) and 10 Amps (Pi) Small size options - Solder-in Cost effective - Resin sealed filters provide environmental protection at low cost Hermetically sealed - Ideal for use in hostile environments Applications Press-in SSM - 10 Amps 2-56 threaded Construction - High temperature construction Construction - High temperature constructions Small size - Square mechanical geometry enhances soldering to a PCB Features/ Benefits Microwave Discrete Filters Plating - Suitable for gold bonding when specified Packaging - Tape and reel packaging along with bulk packaging Coaxial - Feed-thru filtering Design flexibility - Wide range of threaded and solder-in bushings with a variety of circuits: C, L, and Pi Design flexibility - Wide range of bushing sizes and circuit types including C, L, Pi, transient suppression Pi, T, & TT Reliability - Built in accordance with MIL-F-15733 and MIL-F-28861, with QPL listings on both Reliability - All parts built in accordance with MIL-F-15733 and MIL-F-28861 Safety - Some select filters U.L. 1459 recognized and CSA C22.2 certified FED/MIL approvals - Qualified to MIL-F-15733 and MIL-F-28861 FED/MIL approvals - Qualified to MIL-F-15733 Insertion loss range - Effective filtering to 18 GHz in a shielded application Insertion loss range - Effective filtering to 18 GHz in a shielded application Capacitance - Pi: 68 pF to 4000 pF Capacitance - Up to 30,000 pF Feed-thru: 68 pF to .01 F Temperature range - -55C to +125C Operating voltage - Up to 200 VDC Temperature range - -55 to +125 C Performance Characteristics Insertion loss range - Effective filtering from 1 MHz to 18 GHz with proper installation Insertion loss range - Effective filtering from 1 MHz to 18 GHz with proper installation Capacitance and temperature characteristics - To 1.4 F NPO, X7R, Z5U Capacitance and temperature characteristics - To 1.4 F NPO, X7R, Z5U Temperature range - -55C to +125C Temperature range - -55C to +125C Voltage ratings (max.) - To 2500 VDC Voltage ratings (max.) - To 400 VDC 240 VAC @ 400 Hz 240 VAC @ 400 Hz Current ratings (max.) - To 100 Amps Pages 56-61 Pages 71-72 www.spectrumcontrol.com/hcsmt www.spectrumcontrol.com/mwdis Pages 73-85 www.spectrumcontrol.com/resin Current ratings (max.) - To 30 Amps Pages 86-101 www.spectrumcontrol.com/glass SPECTRUM CONTROL INC. * 8031 Avonia Rd. * Fairview, PA 16415 * Phone: 814-474-2207 * Fax: 814-474-2208 * Web site: www.spectrumcontrol.com SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 5 *1566 PRINTER 03-62 12/4/06 9:05 AM Page 4 EMI Filters and Filtered Interconnects Selection Guide FILTERED ARRAYS Applications Filter Plate Assemblies Shrouded Latch Plates Telecommunications equipment, cellular base stations, linear power amplifiers, cellular microcell repeaters, industrial, scientific, remote sensory, and medical equipment Telecommunications equipment, cellular base stations, linear power amplifiers, cellular microcell repeaters, industrial, scientific, remote sensory, and medical equipment Telecommunications equipment, scientific equipment, aerospace applications and point-to-point telemetry Telecommunications equipment, industrial controls, power supplies, uninterruptible power supplies, instrumentation and power distribution equipment Total reduced costs - Economical method of meeting EMC requirements Design flexibility - Available in 10 to 64 positions Total reduced costs - Allow users to reduce production and installation time while lowering overall costs Rugged construction - Provides protection to filtering element; especially useful for repeated changes in field wiring Design flexibility - Wide variety of shapes and sizes Design flexibility - 2 to 6 terminals available in either the "Barrier Strip" or European variety Excellent filtering - Outperform surface mount filters at frequencies above 130 MHz; provide an EMI filtered signal line between electronic system modules Reliability - Every filter plate is tested 100% for key parameters Features/ Benefits Standard centers - Of 0.100" and 2mm allow for easy termination Easy MateTM filter plate - Design provides for quick installation into predefined cutout Performance Characteristics 6 Mates to most ribbon cable connectors A variety of latch ejector heights available Mixed capacitance values and schematics available Standard centers - Pins on .100" centers Microcircuit Packages Housing materials include: Kovar, Aluminum, Copper, Titanium and Copper Alloys Variety of circuits: C, L and Pi Reliability - Cable retention reliable in vibration prone environments Excellent filtering - From 5 MHz to 1 GHz and beyond Connectors offered are: RF, SMA, Bias Pins and Snap-ins Hermetically sealed - Available in both hermetic and non-hermetic packaging Rugged construction - Shroud protects filter element from potential damage Insertion loss range - Effective insertion loss from 1 MHz to 18 GHz with proper installation Insertion loss range - From 1 MHz to 18 GHz Capacitance - Pi: 68 pF to 5000 pF Capacitance - Pi: 68 pF to 5000 pF Voltage ratings (max.) - To 200 VDC Feed-thru: 68 pF to 4000 pF Feed-thru: 68 pF to 4000 pF Temperature characteristics - NPO, X7R, Z5U Temperature range - -55C to +125C Temperature range - -55C to +125C Voltage ratings (max.) - To 250 VDC Voltage ratings (max.) - To 250 VDC Current ratings (max.) - To 5 Amps standard Current ratings (max.) - To 5 Amps standard Performance - Filter elements provide high insertion loss for EMI filtering of DC power and control lines Reliability - Every terminal block is tested 100% for key parameters European style blocks - Available in English and metric spacing FED/MIL approvals - Barrier strips are recognized to U.L. 1059 file E133076 and approved by CSA Std 22.2 No. 158-1987 and ECN584B, LR92537; 52-160 series 100 VDC UL/CSA 52-257 series 250 VAC UL/CSA Insertion loss range - Effective insertion loss from 1 MHz to 18 GHz with proper installation Temperature characteristics - NPO, X7R, Z5U Filtered Terminal Blocks Temperature range - -55C to +125C Current ratings (max.) - To 5 Amps Insertion loss range - Effective insertion loss from 1 MHz to 18 GHz with proper installation Capacitance - 2500 pF to 5200 pF Temperature range - -55C to +105C Voltage ratings (max.) - Barrier: to 250 VAC European: to 100 VDC Current ratings (max.) - Barrier: 20 Amps European: 12 Amps Pages 105-115 Pages 116-117 Pages 118-121 Pages 122-127 www.spectrumcontrol.com/array www.spectrumcontrol.com/array www.spectrumcontrol.com/mcpck www.spectrumcontrol.com/array SPECTRUM CONTROL INC. * 8031 Avonia Rd. * Fairview, PA 16415 * Phone: 814-474-2207 * Fax: 814-474-2208 * Web site: www.spectrumcontrol.com SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 *1566 PRINTER 03-62 12/4/06 9:05 AM Page 5 EMI Filters and Filtered Interconnects Selection Guide FILTERED CONNECTORS Ferrite Filtered D-Subminiature Connectors .318" Footprint Filtered Combo Connectors High Performance Filtered D-Subminiature Connectors .590" Footprint and Adapters Personal computers, microcomputersapplied products and peripheral/ terminal equipment Personal computers, industrial process equipment, cellular base stations, PBX telecommunications equipment, graphics workstations, and medical electronics Telecommunications base station equipment, 48 volt DC power, switching and transmission equipment, power supplies, industrial equipment, computer work stations, medical electronics Telecommunications equipment, cellular base stations, secured communications, medical electronics, industrial process equipment, microwave TX/RX, personal computers,graphics workstations and aerospace applications Cost-effective solutions - Low cost, high performance; replaces individual ferrite bead filters, saving cost and space Cost-effective solutions - Low cost, high performance; replaces individual chip capacitor filters on the PCB/ integrated chips, with feed-thru capacitors, or chip-on-board filters, saving cost and space Excellent filtering - Of signal contacts, power and coaxial contacts with high performing coaxial feed-thru capacitors: ground plane design provides superior EMI shielding Excellent filtering - Filter types include high performing Pi or feed-thru capacitors; ground plane design provides superior EMI shielding Design flexibility - Available in 9, 15, 25, 37 lines standard density Design flexibility - Available in a wide variety of mixed versions with different accessories Applications Design flexibility - Available in 9, 15, 25 lines standard density, 15-line hi-density and stacked construction Features/ Benefits Feed-Thru & Chip-Cap Filtered D-Subminiature Connectors .318" Footprint Compact design - Short, space saving .318" footprint interchangeable with standard D-subminiature connectors Compact design - Short, space saving .318", .405" and .590" footprint interchangeable with standard D-subminiature connectors Performance - Gold plated contacts Performance - Superior filtering of high frequency interference; ground plane design provides superior EMI shielding; gold plated contacts FED/MIL approvals - UL 94V-0 Reliability - Each connector position is tested 100% for critical electrical parameters to ensure consistent performance Options - Available with hardware, gasketing, hooded strain relief Reliability - Each connector position is tested 100% for critical electrical parameters to ensure consistent performance Design flexibility - 9 to 50-line construction, combined power contacts, and selectively loaded lines Reliability - Each connector position is tested 100% for critical electrical parameters to ensure consistent performance Numerous options - Hardware, mounting, waved metal gaskets, hooded strain reliefs, combined filter types, plating, etc. FED/MIL approvals - UL 94V-0, UL/CSA recognized FED/MIL approvals - UL 94V-0, UL/CSA recognized Insertion loss range - 10 to 300 MHz Insertion loss range - 1 MHz to 18 GHz and beyond Insertion loss range - 1 MHz to 18 GHz and beyond Insertion loss range - 1 MHz to 18 GHz and beyond Temperature range - -40C to +105C Capacitance and temperature characteristics - To 1500 pF Capacitance and temperature characteristics - 47 pF to 1500 pF Capacitance and temperature characteristics - To 5000 pF Voltage ratings (max.) - 500 VDC Current ratings (max.) - 5 Amps Performance Characteristics Temperature range - -55C to +125C To 47 nF for COB NPO, X7R, Z5U Temperature range - -40C to +125C Voltage ratings (max.) - 700 VDC Voltage ratings (max.) - 1000 VDC Current ratings (max.) - Coax, 3A, Power 20 A and 40 A Current ratings (max.) - 5 Amps Pages 132-136 www.spectrumcontrol.com/serf Pages 137-144 www.spectrumcontrol.com/conn Pages 177-180 NPO, X7R, Z5U Temperature range - -55C to +125C Voltage ratings (max.) - 1000 VDC Current ratings (max.) - 5 Amps Pages 149-172 www.spectrumcontrol.com/combo www.spectrumcontrol.com/ser700 SPECTRUM CONTROL INC. * 8031 Avonia Rd. * Fairview, PA 16415 * Phone: 814-474-2207 * Fax: 814-474-2208 * Web site: www.spectrumcontrol.com SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 7 *1566 PRINTER 03-62 12/4/06 9:05 AM Page 6 EMI Filters and Filtered Interconnects Selection Guide FILTERED CONNECTORS Series E (ESD/EFT) Transient Protected Connectors Applications Commercial avionics, satellites, telecommunications, power supplies, electronic warfare, ground/air weapon systems and mining and oil drilling exploration Original telephone manufacturing, operating telephone companies, cable reclamation, cable manufacturing and bay connectorization, LANs, WANs, network cards, broadband transmission equipment, workstations, peripherals, fax/modems, copy machines and multiplexing Enclosures or cabinets of electronics equipment such as computers, networking and telecom equipment Performance - Complete ESD/EFT protection at the I/O ports and elimination of line-toline noise problems and spark overs Excellent filtering - Filtering high performance feed-thru capacitors; ground plane design provides superior EMI shielding Excellent filtering - Tubular and planar filtered arrays using Pi, LC, T, and C circuits; TVS protection available Cost-effective solutions - Modular jack connectors filtered with ferrite or capacitive film Effectiveness Maintains shielding across seams or gaps Design flexibility - Standard footprints save valuable board space and reduce additional ground traces Design flexibility - 15 to 78-line configurations and selectively loaded lines Reliability - Each connector position is tested 100% for critical electrical parameters to ensure consistent performance Cost effective solutions - Numerous options - Reduction in total Hardware, mounting, component use saves waved metal gaskets, on hidden costs hooded strain reliefs, Options - plating, etc. Available in a wide variety FED/MIL approvals - of capacitance values, UL 94V-0, providing EMI protection UL/CSA recognized Numerous mounting and hardware options Voltage ratings (max.) - 700 VDC (for 5 seconds) Current ratings (max.) - 5 Amps Capacitance and temperature characteristics - 50 pF to 47,000 pF Insulation resistance - 500M Insertion loss range - 1 MHz to 18 GHz and beyond Capacitance and temperature characteristics - To 5000 pF NPO, X7R, Z5U Temperature range - -55C to +125C Voltage ratings (max.) - 1000 VDC Current ratings (max.) - 5 Amps Pages 181-184 8 Quietshield Gasketing & Shielding Telecommunications equipment, personal computers, graphic workstations, VGA applications, medical and industrial process equipment and aerospace applications Low ground impedance Performance Characteristics Custom Filtered Connectors Filtered Miniature Ribbon RJ45 & RJ11 Datacom Connectors Network servers, firewalls, routers, test and diagnostic equipment, medical monitoring equipment, and I/O interfaces on many PC computer applications All lines have bi-directional protection Features/ Benefits High Density Filtered D-Subminiature Connectors and Adapters Pages 145-148 Design flexibility - Filtered MIL-C-38999 series available in compact and extended shells, MIL-C-83723, MIL-C26482, MIL-C24308, in extended shell, as well as series 400 and 600 ARINC filtered connectors Reliability - Each connector position is tested 100% for critical electrical parameters Insertion loss range - Effective insertion loss from 1 MHz to 18 GHz with proper installation Capacitance and temperature characteristics - To 0.1 F COG, X7R, Z5U Temperature range - -55C to +125C Voltage ratings (max.) - 125 VAC @ 400 Hz Pages 204-231 Miniature ribbon connectors filtered with chip capacitors Design flexibility - Modular jack connectors available in single or multiport styles Miniature ribbon connectors available in 50-line configurations Reliability - Each connector is tested 100% for critical electrical parameters to ensure consistent performance Insertion loss range - 1 MHz to 18 GHz and beyond Capacitance - Up to 820 pF Exclusive Quiet Contact provides instantaneous shielding upon initial contact of gasket Design flexibility Available in a variety of profiles and sizes Custom lengths and shapes available Rugged construction No creasing or tearing; fabric tensile strength up to 80 pounds/inch Lightweight material of 2.3 to 2.8 ounces/square yard Shielding Superior shielding effectiveness of 70 dB between 1 MHz to 18 GHz Temperature range - -55C to +125C Voltage ratings (max.) - 1000 VDC (Miniature ribbon connectors) 707 VDC (Modular jack connectors) Current ratings (max) - 5 Amps Pages 185-192 Pages 233-243 www.spectrumcontrol.com www.spectrumcontrol.com www.spectrumcontrol.com www.spectrumcontrol.com /sere /ser600 /cusconn /data www.spectrumcontrol.com /quietshield SPECTRUM CONTROL INC. * 8031 Avonia Rd. * Fairview, PA 16415 * Phone: 814-474-2207 * Fax: 814-474-2208 * Web site: www.spectrumcontrol.com SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 *1566 PRINTER 03-62 12/4/06 9:06 AM Page 7 Spectrum Control's Expertise As a complete source of EMC solutions, Spectrum Control combines state-of-the-art test facilities with proven expertise in the design and manufacture of EMI/RFI filtering components. To ensure filtering performance appropriate for the application, we utilize both tubular and discoidal capacitors, and C or Pi type filter elements. For pass-band requirements above 50 MHz, we provide unfiltered, insulated feed-thru lines. For additional information or assistance, contact your local Spectrum Control representative or our Customer Engineering Department. Spectrum Control Offers: Engineering support - Our engineering staff, with many years of experience in designing EMI filters, has developed sophisticated computer models to help us provide rapid and cost effective EMI solutions. Following an evaluation of your needs, we will produce an economical, space efficient filter, satisfying your compliance requirements. Reduced lead times and volume production - Our vertical integration as a ceramic capacitor and filter producer enables us to reduce lead times for both prototyping and production orders . . . ensuring on-time delivery. Custom designs - Through the use of all available ceramic capacitor options including tubular and discoidal capacitors, we offer maximum design versatility to meet the needs of any unique application. Filters are available in simple |C or Pi types, as well as any combination of capacitor, inductor, circuit voltage protection devices, such as diodes are also available. Full qualification testing - In addition to our integral quality assurance process, we offer testing in compliance with MIL-F-28861, MIL-F-15733, MIL-STD-202 and other filter and connector specifications. Customer support programs - We will work closely with your organization to help improve the final design and performance of your products, as well as increase your manufacturing and operational efficiency. Spectrum Control has instituted a variety of programs designed to maximize these opportunities. Flexible manufacturing to cut cycle times and meet deadlines EDI to streamline the transmitting of information Inventory Management through flexible shipping programs Consignment/schedule sharing programs to accommodate customers' forecasts Broader distribution base to make our products more readily available and accommodate vendor reduction plans New product development geared to meeting customer-specific requirements and targets Spectrum Control Inc. is CERTIFIED SPECTRUM CONTROL INC. * 8031 Avonia Rd. * Fairview, PA 16415 * Phone: 814-474-2207 * Fax: 814-474-2208 * Web site: www.spectrumcontrol.com SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 9 *1566 PRINTER 03-62 12/4/06 9:06 AM Page 8 Spectrum Control's Expertise The Foundation: Ceramic Capacitors Inside every Spectrum Control EMI filter is a ceramic feed-thru capacitor. Spectrum Control Technology Inc. has engineered a line of ceramic capacitors designed to provide solutions to a wide range of filtering applications. Our tubular and discoidal feed-thru capacitors offer enhanced performance to help you satisfy varied voltage, capacitance, and packaging requirements. All Spectrum Control Technology Inc. ceramic capacitors are manufactured in our world-class ceramic facility which features highly automated, state-of-the-art equipment. By controlling the formulation of the ceramic material and the manufacturing process, Spectrum ensures the foundation of our EMI filters . . . the capacitor, is of the highest quality. The Spectrum Commitment Spectrum Control, Inc. is committed to Operational Excellence . . . an all-consuming customer focus, embodied in our unbending commitment to quality, flexible and responsive factories, faster time to market, and organizational excellence. We offer a comprehensive line of EMI/RFI filters, capacitors, filter plates, filtered connectors filtered terminal blocks, power line filters and EMC testing services for major OEM's serving a variety of industries throughout the world . . . telecommunication, computers, aerospace, military, instrumentation, medical devices and industrial controls. Our worldwide sales channels include distribution, as well as direct manufacturers representatives. Our commitment to Operational Excellence enables us to provide innovative EMC solutions which meet our corporate mandate for world-class value, quality, and delivery. Spectrum Control Inc.'s manufacturing facilities have been audited and qualified to MIL-I-45208, and certified ISO 9001. Dedication to Quality Spectrum Control has invested the resources necessary to establish the most efficient and accurate design, material, assembly and testing procedures. The Spectrum production process is an outgrowth of our Quality Management System which instills in every member of the Spectrum team a single-minded purpose of achieving defect-free production. We're proud to produce the highest quality and most reliable EMI filters, capacitors, and filtered connectors in the world. 10 The EMC Test Solution Our commitment to our customers goes much further than any other EMI filter manufacturer; we provide solutions to your EMI problems. That is why we have a fully equipped Electromagnetic Compatibility Test Laboratory and the expertise to solve the most demanding EMC challenge. We can test your equipment, system, or sub-system to various domestic and international regulatory standards, determine state of compliance, and bring your equipment into compliance with the most cost effective solution. These services are available for a modest daily fee that is often lower than many EMC test houses charge for simply determining compliance or noncompliance. No other EMI filter manufacturer can offer this total solution and the wide range of available Spectrum Control EMI filtering products. For additional information regarding Spectrum Control, our EMI filtering products and our many new products, call us or contact our web site at http://www.spectrumcontrol.com SPECTRUM CONTROL INC. * 8031 Avonia Rd. * Fairview, PA 16415 * Phone: 814-474-2207 * Fax: 814-474-2208 * Web site: www.spectrumcontrol.com SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 *1566 PRINTER 03-62 12/4/06 9:06 AM Page 9 Multilayer Discoidal Capacitor Application Guidelines Ceramic dielectric Electrodes Sources of EMI Electromagnetic interference occurs naturally from terrestrial sources such as lightning discharges, precipitation, and sand and dust storms, in addition to cosmic noise emanating from sources within and outside our solar system. Man-made sources include power lines, rotating machinery, ignition systems, television and radio receivers, fluorescent lights, power amplifiers, computing devices and transmitters of all types. Embedded Electrode Tubular Capacitor Electrode "E1" Ground "G" Electrode "E2" Interference Suppression Filter networks suppress electromagnetic interference in two basic ways. The capacitor elements shunt the interference to ground, and the series inductor elements raise the impedance of the line making the shunt capacitor elements even more effective. Capacitor Elements The types of capacitors used in Spectrum Control filters are often referred to as feed-thru capacitors due to their physical geometry. The feed-thru design results in greatly reduced selfinductance compared to standard leaded capacitors. Also, this design effectively prevents radiation from the input coupling directly with the output of the capacitor, unlike leaded or chip capacitors. The combination of low inductance and high input/output isolation provides excellent shunting of EMI for frequencies up to and beyond 1 GHz. The simplest feed-thru type is a ceramic tube that may have buried electrodes and can be constructed as a single capacitor or as two capacitors, as used in a Pi section filter. This type of device can have capacitance values from 10 pF to 0.1 F and typical working voltage ratings up to 2500 VDC. Due to the simple construction, these capacitors are very efficient at frequencies up to 10 GHz and exhibit no pronounced resonances. Multilayer monolithic discoidal capacitors are used for very high capacitance parts in standard sizes or for smaller filters where the required capacitance cannot be achieved by a ceramic tube. This type of capacitor consists of alternate layers of opposite polarity electrodes separated by a ceramic dielectric. Typical capacitance values from 100 pF to 10 F are available with working voltages up to 400 VDC. Resin Sealed Filter Hermetically Sealed Filter Potting Terminal Bushing Glass seal Capacitor Ferrite bead Coil Pi section tubular capacitor Coil wire Potting Circular Filtered Connector Planar capacitors Medium temp solder joints Interfacial seal Hard insert Inductive Elements Ferrite sleeves are used with tubular capacitors since they can be conveniently accommodated inside the tube to provide a very compact filter. They are also used with discoidal capacitors in some applications. Wound inductors are used with discoidal capacitors to provide very high performance filters. Ferrite bead Potting SPECTRUM CONTROL INC. * 8031 Avonia Rd. * Fairview, PA 16415 * Phone: 814-474-2207 * Fax: 814-474-2208 * Web site: www.spectrumcontrol.com SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 11 *1566 PRINTER 03-62 12/4/06 9:06 AM Page 10 Application Guidelines Low Pass EMI filters are available in the following circuit configurations, schematics are shown at right. C Filter C Filter The C filter is a three terminal feed-thru capacitor. It is used to attenuate high frequency signals. L-C Filter LT Low impedance source L Filter An L filter consists of one inductive element and one capacitive element. This type of filter can offer high impedance or low impedance input depending upon its orientation in the circuit. It is most commonly used in applications where one has a high impedance load and a low impedance source (see LT), or where one has a high impedance source and a low impedance load (see LB). Threaded end L-C Filter LB High impedance source Pi Filter The Pi filter contains two capacitive elements and one inductive element. It presents a low impedance to both the source and the load. Because of the additional element, it provides better high frequency performance than the C or L configurations. Due to the possibility of `ringing', Pi filters are not recommended for switching applications. High impedance load Low impedance load Threaded end Pi Filter Transient Suppression Pi Filter The Transient Suppression Pi filter consists of a Pi filter with a transient suppressor at the input to the filter. The filter supplies the high frequency performance of the Pi filter with the added protection of the transient suppressor to protect the circuit from voltage spikes on the line. Transient Suppression Pi Filter T Filter The T filter consists of two inductive elements and one capacitive element. This circuit configuration presents a high impedance input from either end. It has similar filter performance to the Pi circuit configurations. It does not have the ringing characteristic of the Pi filter and can be used in switching applications. T Filter Multi-section Filter (Double T) Spectrum's multi-element filters are designed for optimum insertion loss in circuits with a relatively low source and load impedance. These filters are also recommended in any application where a high degree of filtering is required. The unit utilizes an inductor input for the best compatibility with a MIL-STD-461 test setup (10 F feed-thru capacitor). 12 Multi-section Filter (Double T) SPECTRUM CONTROL INC. * 8031 Avonia Rd. * Fairview, PA 16415 * Phone: 814-474-2207 * Fax: 814-474-2208 * Web site: www.spectrumcontrol.com SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 *1566 PRINTER 03-62 12/4/06 9:06 AM Page 11 Insertion Loss (dB) F 70 50 Application Guidelines F 4u 1. 40 30 .0 5 6u C Filter 60 uF .27 F 6u .5 .02 uF .1 7u F F 1u .0 10 20 Insertion Loss Measurement 5000pF 0 10 1 Frequency (MHz) 100 1000 5u F uF .02 .06 5 50 00 pF 15 00 pF 40 E1 E2 50 30 20 1 0 0 1 0.1 100 10 Frequency (MHz) 1000 1 80 Various Circuit Configurations 60 Where Zs = Source impedance in ohms Zl = Load impedance in ohms Zt = Transfer impedance in 50 ohm system Example: 1. System source and load impedances are 100 ohms and 600 ohms respectively. 2. Selected filter has insertion loss of 50 dB at 100 MHz in a 50 ohm system. 3. From the IL vs Transfer Impedance curve (right) the transfer impedance is 0.08 ohms. TF ilte r LF ilte r 100 Zs Zl + Zt (Zs + Zl) 1+ 0.1 Pi Filter 60 In practical circuit applications the source and load impedances may be quite different from 50 ohms. If these impedances are known, Spectrum engineering can provide information on the expected Insertion Loss or an estimate can be made using the following formula: 4. IL = 20 log 0.01 70 Circuit Impedance vs. Insertion Loss IL (dB) = 20 log pF 2700pF 10 Insertion loss (IL) is a measure of the effectiveness of a filter. It is defined as the ratio of the voltage (E1) across the circuit load without the filter and the voltage (E2) across the load with the filter. Since insertion loss is dependent on the source and load impedance in which the filter is to be used, IL measurements are defined for a matched 50 ohm system. The insertion loss is measured in decibels (dB) and defined as follows: IL (dB) = 20 log 00 C Fi lte r 40 Pi Filter 20 Double T Filter 0 0.01 0.1 10 1 Frequency (MHz) 100 1000 100 x 600 0.08 (100+600) Transfer Impedance Graph 120 = 20 log 1072 = 61 dB Insertion Loss (dB) 100 80 60 40 20 10-4 10-3 10-2 10-1 Transfer Impedance -- Z (For 50 Source and 50 Load) 10-0 101 SPECTRUM CONTROL INC. * 8031 Avonia Rd. * Fairview, PA 16415 * Phone: 814-474-2207 * Fax: 814-474-2208 * Web site: www.spectrumcontrol.com SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 13 *1566 PRINTER 03-62 12/4/06 9:06 AM Page 12 Application Guidelines Surface Mount Filters Surface mount filters are rated at currents up to 20 amps for achieving electromagnetic compatibility on high current printed circuit boards. These filters are available in feedthru and Pi circuit configurations. Tape and reel packaging is available to enable pick and place equipment installation of this product, saving time and cost compared to thruhole filters. Resin Sealed Filters Resin sealed filters offer a wide variety of packages to accommodate your size and mounting requirements. Miniature solder-in (low profile) filters are constructed with a discoidal and are glass sealed on one end to provide hermeticity between compartments. Solder-in filters provide a compact, low cost Pi or C filter that can be soldered into a bulkhead. High current/high voltage bolt-in filters featuring current ratings up to 100 ADC or rated voltages up to 2500 VDC. Hermetically Sealed Case Filters Glass seal filters are used where a rugged, hermetically sealed filter is required. They consist of discoidal capacitors with or without ferrite sleeves or wound inductors in 1/4-28 or 5/16-24 threaded cases. Through the use of discoidal capacitors and wound inductors, high capacitance and inductance values can be achieved. Hermetically sealed filters provide very high EMI filtering performance. Filtered Arrays The filtered array product offers flexibility to customers in choosing an efficient and cost effective solution to solving EMC issues. The filtered array product line encompasses our filter plates and filtered terminal blocks. Filter plates involve multiple filter elements packaged into a metal ground plate. We offer both the patent pending Easy Mate(R) family of filter plates or traditional Bolt-in style plates. Standard filter plates are available in 0.100" or 2mm centers, with many other configurations possible. Filtered Connectors Spectrum Control's filtered connectors offer the mostcomplete selection of products in the industry. Ourproducts range from standard D-subminiature filteredconnectors to more complex circular and ARINC connectors. Custom solutions are available, and our engineering support team will work closely with your engineering staff to solve your EMC problems at the I/O interface. 14 SPECTRUM CONTROL INC. * 8031 Avonia Rd. * Fairview, PA 16415 * Phone: 814-474-2207 * Fax: 814-474-2208 * Web site: www.spectrumcontrol.com SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 *1566 PRINTER 03-62 12/4/06 9:06 AM Page 13 EMC Testing Services Spectrum Control has the EMC expertise and in-house filter solutions you need to meet worldwide EMC standards. Our EMC testing services offer you a flexible resource to assist in product development by identifying and correcting EMI susceptibility and/or emission problems. Spectrum Control has a fully equipped EMC test laboratory and experienced engineering staff ready to solve demanding EMC challenges. For a modest daily fee we can test your equipment, determine state of compliance, and work with you in developing a viable solution. It is not uncommon for clients to leave our lab with a prototype in hand. EMC Lab Highlights NARTE Certified Staff Semi-anechoic chamber Computer controlled instrumentation Graphical data presentation in multiple formats Fiber optic video monitoring system Testing Capabilities MILITARY MIL-STD-461 A/B/C/D/E MIL-STD-1399 AUTOMOTIVE CISPR 25 Test Methods COMMERCIAL FCC-Part 15 RTCA/DO-160 A/B/C/D GR-1089-CORE INTERNATIONAL EN55011/CISPR 11 EN55014/CISPR 14 EN55022/CISPR 22 EN61000-4-2 Electrostatic Discharge EN61000-4-3 Radiated RF Immunity EN61000-4-4 Electrical Fast Transient EN61000-4-5 Surge EN61000-4-6 Conducted RF Immunity SPECTRUM CONTROL INC. * 8031 Avonia Rd. * Fairview, PA 16415 * Phone: 814-474-2207 * Fax: 814-474-2208 * Web site: www.spectrumcontrol.com SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 15 *1566 PRINTER 03-62 12/4/06 9:06 AM Page 14 Filter Installation Threaded Style Filters Filter Thread Size Maximum Mounting Torque Drill Size Mounting Hole Dia. in-lbs Nm (in) (mm) English Metric (mm) 4-40 1.5 0.170 0.120 3.05 # 31 3.10 6-40 3 0.339 0.147 3.73 # 26 3.75 6-32 3 0.339 0.147 3.73 # 26 3.75 8-32 4 0.452 0.173 4.39 # 17 4.40 10-32 4 0.452 0.190 4.83 #8 5.10 12-28 6 0.678 0.228 5.79 #1 5.80 12-32 6 0.678 0.228 5.79 #1 5.80 1/4-28 * 7 0.791 0.261 6.63 #G 6.70 5/16-24 * 7 0.791 0.323 8.20 #P 8.25 5/16-32 7 0.791 0.323 8.20 #P 8.25 3/8-32 9 1.017 0.386 9.80 #W 9.90 Note: For 5/8-24 and 7/16-28 please refer to the specific instruction noted on part drawings or see page 84 of the catalog. Exceeding recommended mounting torque may result in damage to the capacitor within the filter due to possible twisting or elongation of the case. For product without hex surfaces do not hold the filter with pliers or other gripping tools. Pressure exerted on the filter case may crack the ceramic capacitor element. Proper use of filters requires that the filter case be adequately grounded to form an effective path for the interference. Solder-in Style Filters 16 A controlled temperature profile not exceeding 6F (3C) per second is recommended when soldering filters. When soldering to terminals of a filter, a heat sink should always be used adjacent to the body of the filter. 60-40 solder is recommended for installation of the filter into the chassis as well as soldering to the terminals. If a filter style without an eyelet is being soldered into a chassis, iron processes should be avoided and the recommended solder alloy is 60-38-2. Installation hole size for a solder-in filter should be 0.003-0.005" over the maximum tolerance of the minor diameter of the mounting portion of the eyelet with a 0.002" tolerance. Machine/oven soldering 385-415F (195-210C) using a dwell and cycle time fast enough to reflow the solder and ramped to maintain less than 6F/sec rate of change. 1/4-28 with .200 (5.08) Flats 5/16-24 with .250 (6.35) Flats .210 .003 (5.33 .076) .260 .003 (6.60 .076) * Recommended mounting hole size for threads with flats .260 .003 (6.60 .076) .320 .003 (8.13 .076) Dimensions in inches (mm) For iron soldering to filter body, preheat components at 250-300F (120-150C), solder iron is recommended to be set at 500-550F (260-290C). The dwell on the solder joint should be less than 5 seconds.The time is dependent on the heat sinking provided by the chassis so a longer preheat may be required. Soldering to Filter Terminals Use a temperature controlled soldering iron with tip temperature of 525 10F (275 5C). Use an SN 63 RMA flux core solder. Make mechanical wire connection. Use heat sink next to filter body where possible. Clean soldering iron tip. Clip end of solder (remove 0.5") to expose flux for soldering. Apply soldering iron to wire/flag junction at wetted solder tip region of iron (Wetted Bridge Method). Immediately apply solder. Dwell time for soldering iron tip on product should be 3-5 seconds maximum. SPECTRUM CONTROL INC. * 8031 Avonia Rd. * Fairview, PA 16415 * Phone: 814-474-2207 * Fax: 814-474-2208 * Web site: www.spectrumcontrol.com SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 *1566 PRINTER 03-62 12/4/06 9:06 AM Page 15 EMI/RFI Filter and Capacitor Performance Testing The resin sealed and hermetically sealed filters shown in this section have been designed to meet the requirements of this test plan as applicable. Group I tests are typically performed on most product. Groups II, III and IV tests are performed per specification requirements. Test Group I Order of Test *1 Examination or Test Visual and Mechanical Examination The information shown can be used as a basis for filter specifications. (Contact factory for additional details if necessary.) Test Method In accordance with applicable requirements. *2 Materials, Designs, Construction and Workmanship *3 Physical Dimensions and Marking *4 Seal Method 112, Condition A No leaks. Not applicable to resin sealed or solder-in products. *5 Capacitance Method 305, 1KHz. 2.5 VRMS Max. 25C Within specified tolerance. *6 Dielectric Withstanding Voltage Method 301, 2.5 times, DCWV, 5 seconds, 50 Ma max. charging current No evidence of damage or breakdown. *7 Insulation Resistance Method 302 at DCWV, at 2 minutes 50 ma charging current Greater than 1000 megohms or 100 ohm farads, whichever is less. *8 Voltage Drop MIL-F-15733, Paragraph 4.6.8 Per applicable requirements. *9 Insertion Loss MIL-STD-220, 3pc, sample only Per applicable requirements. 1 Temperature Rise MIL-F-15733, Paragraph 4.6.4 Per applicable requirements. 2 Overload MIL-F-15733, Paragraph 4.6.10 Per applicable requirements. 3 Barometric Pressure Method 105, Test Condition B hi-pot, (per method 301) at 1.25 times DCWV No evidence of damage or breakdown. 4 Shock Method 213, Test Condition I No mechanical damage, Insulation resistance greater than 500 ohm farads, whichever is less. 5 Vibration Method 204, Test Condition B for Glass Seal, Condition D for Resin No mechanical damage, Insulation resistance greater than 500 megohms or 50 ohm farads, whichever is less. 6 Moisture Resistance Method 106 Insulation resistance greater than 500 megohms or 50 ohm farads whichever is less. 1 Terminal Strength Method 211, Test Condition A, 5 lbs. No evidence of loosening or rupturing of terminal. 2 Resistance to Soldering Heat Method 210, Test Condition B, Depth of immersion 1/16 plus or minus 1/32 Insulation resistance greater than 500 megohms or 50 ohm farads whichever is less. 3 Thermal Shock Method 107 Test Condition A -55C to +125C Insulation resistance greater than 500 megohms or 50 ohm farads whichever is less. 4 Immersion Cycling Method 104 Test Condition A Insulation resistance greater than 500 megohms or 50 ohm farads whichever is less. 1 Solderability (5pcs only) Method 208 Per applicable requirements. 2 Life Method 108, Test Condition D with 125% rated voltage at maximum operating temperature Filters shall meet all initial requirements except insulation resistance shall not be less than 50% of initial guaranteed value. II III IV Post Test Requirements * Acceptance tests typically performed on most products. Methods are from MIL-STD-202 SPECTRUM CONTROL INC. * 8031 Avonia Rd. * Fairview, PA 16415 * Phone: 814-474-2207 * Fax: 814-474-2208 * Web site: www.spectrumcontrol.com SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 17 *1566 PRINTER 03-62 12/4/06 9:06 AM Page 16 EMI/RFI Filter and Capacitor Performance Testing Reliability Levels Class B Class B is outlined in MIL-F-28861 and is prescribed for most military/aerospace requirements. It is more stringent than MIL-F-15733 requiring 100% screening that includes thermal shock, voltage conditioning and x-ray. Periodic Group B testing is performed on units selected at random from production lots. Class B Test Sequence Summary Class Inspection B Group I AC voltage drop (when applicable) X Voltage and temperature limits of capacitance X Insertion loss (at temperature) X Barometric pressure (reduced) X Temperature rise X Current overload X Terminal strength X Thermal shock and immersion X Group II Subgroup 1 X Life Subgroup 2 Resistance to soldering heat X Salt spray (corrosion) X Radiographic inspection X Subgroup 3 Resistance to solvents X Group III 18 Shock (specified pulse) X Vibration (high frequency) X Moisture resistance X Seal (when applicable) X Radiographic inspection X "R" level testing "R" level screening is performed by Spectrum Control's Hi-Rel Laboratory as detailed below. Customers requiring special tests may order to their own specifications or simply order to level R and then note additions or deviations. "R" level test sequence (100% testing unless otherwise specified) Thermal Shock: 5 cycles from -55C to +125C in accordance with MIL-STD-202, Method 107D, Condition A. Burn-in: 100 hours at 1.4x rated DC voltage, 125C. Seal Test: MIL-STD-202, Method 112, Test Condition A. Hermetic seal parts only. Capacitance and Dissipation Factor: MIL-STD-202, Method 305, frequency 1kHz. Dielectric Withstanding Voltage: 2.5 times the rated DC voltage for 5 1 second at 25C, with 50 mA maximum charging current. Insulation Resistance: MIL-STD-202, Method 302, 125C at rated DC voltage and room temperature (25C). The 125C requirement shall be 10% of the specified catalog IR at 25C. DC Resistance: MIL-STD-202, Method 303. Insertion Loss Test -- Sample per MIL-F-15733. At full rated load in accordance with MIL-STD-220. The minimum insertion loss shall be defined in the filter catalog. Visual and Mechanical: in accordance with MIL-F-15733. Marking: All filters which have successfully completed the test sequence shall be marked with an "R" in the second part of the number. For example, a standard SCI-2130-004 becomes SCI-R2130-004 and 9051-1000000 becomes 9051-R100-0000, and 51-719-011 becomes 51-R719-011 after completion of the Hi-Rel Level "R" Test Sequence. SPECTRUM CONTROL INC. * 8031 Avonia Rd. * Fairview, PA 16415 * Phone: 814-474-2207 * Fax: 814-474-2208 * Web site: www.spectrumcontrol.com SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 *1566 PRINTER 03-62 12/4/06 9:06 AM Page 17 Surface Mount Filters and Inductors CERTIFIED CERTIFIED SPECTRUM CONTROL INC. * 8031 Avonia Rd. * Fairview, PA 16415 * Phone: 814-474-2207 * Fax: 814-474-2208 * Web site: www.spectrumcontrol.com SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 19 *1566 PRINTER 03-62 12/4/06 9:06 AM Page 18 CERTIFIED Surface Mount Filters and Inductors Selection Guide Ferrite Chip Beads Available in standard or power versions Offered in EIA sizes 0402, 0603, 0805, 1206, 1806 and 1812 Tape and Reel packaging Spectrum ferrite chip beads provide EMI attenuation (without grounding) in a broad range of inductance values. Standard sizes feature values of 5 to 2,000 at 100 MHz. These multilayer chip beads are suitable for flow or reflow soldering and achieve excellent solderability from the nickel barrier and solder overplate design. Ferrite Chip Beads . . . . . . . . . .22-29 Ferrite Power Beads . . . . . . . . .30-35 Ferrite inductors prevent electromagnetic interference to signals in high-density circuits and prevent crosstalk with a closed magnetic circuit. These inductors feature high Q characteristics and a wide range of inductance values. Spectrum ferrite inductors have a smaller footprint than standard wirewound inductors and are designed to save valuable board space. Ferrite inductors are suitable for flow or reflow soldering. Ferrite Inductors . . . . . . . . . . .36-39 Ceramic chip inductors are designed to address surface mount inductor needs in high frequency circuits, featuring high Q characteristics at high frequency and self-resonant frequency. These inductors may be used at a frequency up to 6 GHz with Q values of 10 to 23 at 100 MHz, up to 63 at 800 MHz. Ceramic inductors offer excellent solderability for flow or reflow soldering. Ceramic Chip Inductors . . . . . . . . . . . . . . . . .40-43 Ferrite Inductors Available in standard EIA sizes 0603, 0805 and 1206 Tape and Reel packaging Inductance range of .047 to 12H Ceramic Inductors Available in standard EIA sizes 0402, 0603 and 0805 Tape and Reel packaging Inductance ranges of 1.0 to 100nH Three Terminal Chip EMI Filters SMD chips in EIA 0805, 1205, and 1806 20 body sizes Rated to 2 amps Capacitance values from 22 to 220,000 pF Several ceramic characteristics available Supplied on T&R for easy placement (Bulk also available) Spectrum Control three terminal chips offer excellent filtering performance in high-current applications. These non-polar, surfacemountable chips offer superior ability to withstand transient voltages and surge. Other characteristics include exceptional solderability and resistance to solder heat. Three Terminal Chips . . . . . . . 48-51 Three Terminal Chips Soldering Specifications . . . . . . . . 52 Three Terminal Chips Packaging Specifications. . . . . . . . 53 SPECTRUM CONTROL INC. * 8031 Avonia Rd. * Fairview, PA 16415 * Phone: 814-474-2207 * Fax: 814-474-2208 * Web site: www.spectrumcontrol.com SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 12/4/06 9:06 AM Page 19 Other Key Pages Surface Mount Filters and Inductors Selection Guide LC Type Chips SMD chips in EIA 0805 and 1206 body sizes Available with cut-off frequencies from 10 MHZ to 220 MHZ Steep insertion loss (IL) curves LC chips are ideal for use in high frequency signal lines as high-efficiency surface mount filters. These non-polar chip filters are effective over a wide range of frequencies and feature steep insertion loss characteristics. LC type chips are of monolithic construction utilizing dielectric and ferrite materials. Pages Filter Installation . . . . . . . . . . . . . .16 Performance Testing . . . . . . . . .17-18 Military Cross Reference . . . .237-239 Terminology . . . . . . . . . . . . . . . . . . .44 Land Patterns and Soldering Profiles . . . . . . . . . . . . . . . . . . . . . . .45 Packaging and Storage . . . . . . . . . .46 Competitive Cross Reference . . . . . .47 LC Type Chips . . . . . . . . . . . . .54-55 Square Surface Mount EMI Filters Square geometric for enhanced SMD soldering Pi circuits up to 10 amps Capacitance values up to 4000 pF Rated up to 100V DC Square surface mount EMI filters are designed to filter EMI/RFI on crowded printed circuit boards at currents up to 10 amps. These filters eliminate the need for thru-hole filters, thereby giving the designer the ability to create an "RF fence" without using high-cost RF bulkheads. Spectrum square surface mount EMI filters are of high temperature construction and may be installed utilizing pick-and-place equipment. SSM Series . . . . . . . . . . . . . . . .56-61 High Current Power SMD EMI Filters PSM series Handles up to 20 amps 20 amps for Feed-Thrus 10 amps for Pi Rated up to 200V DC Capacitance values of 68 pF to 10,000 pF Superior performnce in GHz applications Spectrum Control high current power SMD EMI filters are the first surface mount filters designed to effectively filter EMI/RFI on printed circuit boards operating at currents up to 20 amps. These filters are of high temperature construction and offer superior high frequency noise suppression. PSM Series . . . . . . . . . . . . . . . .56-61 Surface Mount Filters & Inductors *1566 PRINTER 03-62 High Frequency Thru-Hole PCB Filters Thru-hole design available in two configurations Encapsulated capacitive and Ferrite to protect against environmental concerns High frequency thru-hole PCB filters aid in meeting FCC and VDE requirements by providing EMI filtering for protection of low power digital circuits. These filters mount directly to printed circuit board, allowing the filter to be flow soldered with other components. Placement of one of these filters at the EMI problem source could eliminate the need for additional filtering at other circuit points. PCB Filters . . . . . . . . . . . . . . . . . .62 SPECTRUM CONTROL INC. * 8031 Avonia Rd. * Fairview, PA 16415 * Phone: 814-474-2207 * Fax: 814-474-2208 * Web site: www.spectrumcontrol.com SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 21 *1566 PRINTER 03-62 12/4/06 9:06 AM Page 20 Surface Mount EMI Filters Ferrite Chip Beads Features Surface Mount Filters & Inductors Multilayer design Available in standard EIA/EIAJ chip sizes (0402/1005, 0603/1608, 0805/2012, 1206/3216, etc.) Excellent solderability is achieved from a nickel barrier with a solder overplate Provides EMI attenuation without grounding Broad range of impedance values available (standard line has values of 5 to 2,000 at 100 MHz) Closed magnetic circuit Parts are suitable for flow or re-flow soldering Available in tape and reel for easy placement Operational temperature range of -55C to +125C W L H Applications Telecommunications equipment (cellular phones, cordless phones, faxes and ISDN's) Digital audio/visual equipment (TV, HDTV, VTR, DVD, CATV tuners and etc.) GPS and car navigation equipment High speed clocks Consumer electronics Signal lines LAN and WAN hardware B Part Numbering System Example: FCB-0603-B102P7 FCB 22 - 0603 Series Part Size Ferrite Chip Beads EIA Size (Length x Width) - B 102 P 7 Material Characteristic Impedance Value Tolerance Code Packaging 10(2) Standard Value is P 7 = 7 inch reel Determined by the desired electrical characteristic (2) = the # of zeros that will follow the first two digits P = 25% 3 = 13 inch reel Example: 10(2) = 10 followed by 2 zeros = 1,000 Ohms M = 20% K = 10% J = 5% Land Patterns and Soldering Temperature Profiles Packaging Specifications and Storage Requirements See page 45. See page 46. SPECTRUM CONTROL INC. * 8031 Avonia Rd. * Fairview, PA 16415 * Phone: 814-474-2207 * Fax: 814-474-2208 * Web site: www.spectrumcontrol.com SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 *1566 PRINTER 03-62 12/4/06 9:06 AM Page 21 Surface Mount EMI Filters Ferrite Chip Beads Physical Characteristics EIA Physical Dimensions EIAJ Length (L) Width (W) Height (H) Termination Band (B) 0402 1005 0.039 0.004 (1.00 0.10) 0.020 0.004 (0.50 0.10) 0.020 0.004 (0.50 0.10) 0.010 .004 (0.25 0.10) 0603 1608 0.063 0.006 (1.60 0.15) 0.031 0.006 (0.80 0.15) 0.031 0.006 (0.80 0.15) 0.014 0.006 (0.36 0.15) 0805 2012 0.079 0.008 (2.00 0.20) 0.049 0.008 (1.25 0.20) 0.035 0.008 (0.90 0.20) 0.020 0.010 (0.51 0.25) 1206 3216 0.126 0.008 (3.20 0.20) 0.063 0.008 (1.60 0.20) 0.043 0.008 (1.10 0.20) 0.020 0.010 (0.51 0.25) 1806 4516 0.177 0.010 (4.50 0.25) 0.063 0.008 (1.60 0.20) 0.055 0.010 (1.40 0.25) 0.020 0.010 (0.51 0.25) 1812 4532 0.177 0.010 (4.50 0.25) 0.126 0.010 (3.20 0.25) 0.055 0.010 (1.40 0.25) 0.020 0.010 (0.51 0.25) Dimensions in inches (mm) Electrical Characteristics Standard FCB-0402 Sizes Standard FCB-0603 Sizes Part Number Impedance at 100 MHz Max. DCR FCB-0402-B100P* FCB-0402-B700P* FCB-0402-B121P* FCB-0402-B221P* FCB-0402-B601P* FCB-0402-B102P* 10 70 120 220 600 1,000 0.05 0.40 0.50 0.70 1.10 1.50 Max. Current mA 500 200 100 50 Notes: * Please add packaging code at the end of part. To change Tolerance Code, replace P with other tolerance values. FCB-0603 High Speed Beads Part Number Impedance at 100 MHz Max. DCR Max. Current mA FCB-0603-H180P* FCB-0603-H421P* FCB-0603-H601P* FCB-0603-H102P* 18 420 600 1,000 0.10 0.50 0.65 0.60 400 200 Part Number Impedance at 100 MHz FCB-0603-B300P* FCB-0603-B400P* FCB-0603-B600P* FCB-0603-B800P* FCB-0603-B900P* FCB-0603-B101P* FCB-0603-B121P* FCB-0603-B151P* FCB-0603-B181P* FCB-0603-B221P* FCB-0603-B301P* FCB-0603-B601P* FCB-0603-B102P* 30 40 60 80 90 100 120 150 180 220 300 600 1,000 Max. DCR Max. Current mA 0.10 400 0.20 300 0.30 250 0.35 0.45 0.60 230 210 190 Surface Mount Filters & Inductors Size Notes: * Please add packaging code at the end of part. To change Tolerance Code, replace P with other tolerance values. 50 Notes: * Please add packaging code at the end of part. To change Tolerance Code, replace P with other tolerance values. SPECTRUM CONTROL INC. * 8031 Avonia Rd. * Fairview, PA 16415 * Phone: 814-474-2207 * Fax: 814-474-2208 * Web site: www.spectrumcontrol.com SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 23 *1566 PRINTER 03-62 12/4/06 9:06 AM Page 22 Surface Mount EMI Filters Ferrite Chip Beads Electrical Characteristics continued Surface Mount Filters & Inductors Standard FCB-0805 Sizes Part Number Impedance at 100 MHz FCB-0805-A070P* FCB-0805-A110P* FCB-0805-A300P* FCB-0805-A400P* FCB-0805-A500P* FCB-0805-A600P* FCB-0805-A800P* FCB-0805-B101P* FCB-0805-B121P* FCB-0805-B151P* FCB-0805-B301P* FCB-0805-B401P* FCB-0805-B601P* FCB-0805-B102P* FCB-0805-B152P* FCB-0805-B202P* 7 11 30 40 50 60 80 100 120 150 300 400 600 1,000 1,500 2,000 Standard FCB-1206 Sizes Max. DCR Max. Current mA 0.10 800 0.15 400 0.30 200 0.40 0.55 0.30 200 200 100 Part Number Impedance at 100 MHz FCB-1206-A190P* FCB-1206-A260P* FCB-1206-A300P* FCB-1206-A310P* FCB-1206-A500P* FCB-1206-A600P* FCB-1206-A700P* FCB-1206-A800P* FCB-1206-A900P* FCB-1206-A101P* FCB-1206-A121P* FCB-1206-A201P* FCB-1206-A301P* FCB-1206-A601P* FCB-1206-B102P* FCB-1206-B152P* FCB-1206-B202P* 19 26 30 31 50 60 70 80 90 100 120 200 300 600 1,000 1,500 @ 50 MHz 2,000 @ 30 MHz Max. DCR Max. Current mA 0.10 600 0.20 400 0.30 0.40 0.50 0.70 0.90 0.60 300 200 150 100 FCB-0805 High Speed Beads Part Number Impedance at 100 MHz Max. DCR Max. Current mA FCB-0805-H201P* FCB-0805-H601P* FCB-0805-H102P* 200 600 1,000 0.40 0.40 0.75 200 100 Notes: * Please add packaging code at the end of part. To change Tolerance Code, replace P with other tolerance values. Consult factory for other impedance values of the 0805 footprint that are available from Spectrum Control. FCB-1206 High Speed Beads Part Number FCB-1206-H300P* FCB-1206-H181P* FCB-1206-H601P* Impedance at 100 MHz 30 180 600 Max. DCR Max. Current mA 0.10 0.30 0.30 600 300 200 Notes: * Please add packaging code at the end of part. To change Tolerance Code, replace P with other tolerance values. Consult factory for other impedance values of the 1206 footprint that are available from Spectrum Control. Standard FCB-1806 and FCB-1812 Sizes Part Number FCB-1806-A800P* FCB-1806-A101P* FCB-1812-B121P* Impedance at 100 MHz 80 100 120 Max. DCR 0.30 0.30 0.30 Max. Current mA 300 200 300 Notes: * Please add packaging code at the end of part. To change Tolerance Code, replace P with other tolerance values. Consult factory for other impedance values of the 1806 and 1812 footprint that are available from Spectrum Control. 24 SPECTRUM CONTROL INC. * 8031 Avonia Rd. * Fairview, PA 16415 * Phone: 814-474-2207 * Fax: 814-474-2208 * Web site: www.spectrumcontrol.com SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 *1566 PRINTER 03-62 12/4/06 9:06 AM Page 23 Surface Mount EMI Filters Ferrite Chip Beads Typical Impedance Characteristics (Curves not listed are available upon request or at our website.) 0402 Size FCB-0402-B150 FCB-0402-B221 100.00 1000 |Z|, XL, R (Ohm) |Z|, XL, R (Ohm) XL 1.00 R 0.10 0.01 1 10 100 Frequency (MHz) 100 R 1 0.1 1000 XL 10 1 10 100 Frequency (MHz) 1000 0603 Size FCB-0603-B600 1000 100 100 |Z|, XL, R (Ohm) |Z|, XL, R (Ohm) FCB-0603-B300 1000 |Z| 10 XL R 1 0.1 1 10 100 Frequency (MHz) R 1 10 100 Frequency (MHz) 1000 FCB-0603-B900 1000 |Z| 100 |Z|, XL, R (Ohm) |Z|, XL, R (Ohm) XL 1 FCB-0603-B800 1000 XL 10 R 1 0.1 |Z| 10 0.1 1000 Surface Mount Filters & Inductors |Z| |Z| 10.00 1 10 100 Frequency (MHz) 1000 |Z| 100 10 XL R 1 0.1 1 10 100 Frequency (MHz) 1000 SPECTRUM CONTROL INC. * 8031 Avonia Rd. * Fairview, PA 16415 * Phone: 814-474-2207 * Fax: 814-474-2208 * Web site: www.spectrumcontrol.com SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 25 *1566 PRINTER 03-62 12/4/06 9:06 AM Page 24 Surface Mount EMI Filters Ferrite Chip Beads Typical Impedance Characteristics (Curves not listed are available upon request or at our website.) 0603 Size continued FCB-0603-B101 FCB-0603-B121 |Z| |Z| |Z|, XL, R (Ohm) |Z|, XL, R (Ohm) 1000 100 XL 10 R 1 0.1 1 10 100 Frequency (MHz) 100 XL 10 R 1 0.1 1000 FCB-0603-B151 10 100 Frequency (MHz) 1000 1000 |Z| |Z| |Z|, XL, R (Ohm) 100 XL 10 R 1 0.1 1 10 100 Frequency (MHz) 100 |Z| 1000 |Z| 1000 XL R 10 10 100 Frequency (MHz) FCB-0603-B102 |Z|, XL, R (Ohm) |Z|, XL, R (Ohm) 1 10000 100 1 0.1 R 1 0.1 1000 XL 10 FCB-0603-B601 1000 26 1 FCB-0603-B301 1000 |Z|, XL, R (Ohm) Surface Mount Filters & Inductors 1000 XL 100 R 10 1 1 10 100 Frequency (MHz) 1000 0.1 1 10 100 Frequency (MHz) 1000 SPECTRUM CONTROL INC. * 8031 Avonia Rd. * Fairview, PA 16415 * Phone: 814-474-2207 * Fax: 814-474-2208 * Web site: www.spectrumcontrol.com SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 *1566 PRINTER 03-62 12/4/06 9:06 AM Page 25 Surface Mount EMI Filters Ferrite Chip Beads Typical Impedance Characteristics (Curves not listed are available upon request or at our website.) 0805 Size FCB-0805-A500 FCB-0805-A300 1000 |Z| 10 XL R 1 0.1 1 10 100 Frequency (MHz) 100 10 1 10 100 Frequency (MHz) 1000 1000 100 |Z| |Z|, XL, R (Ohm) |Z|, XL, R (Ohm) 1 FCB-0805-B101 FCB-0805-A600 1000 XL 10 R 1 0.1 XL R 0.1 1000 |Z| 1 10 100 Frequency (MHz) XL 10 R 1 0.1 1000 |Z| 100 1 10 100 Frequency (MHz) Surface Mount Filters & Inductors 100 |Z|, XL, R (Ohm) |Z|, XL, R (Ohm) 1000 1000 FCB-0805-B301 FCB-0805-B121 1000 1000 |Z| 100 |Z|, XL, R (Ohm) |Z|, XL, R (Ohm) |Z| XL 10 R 1 0.1 1 10 100 Frequency (MHz) 100 1 0.1 1000 XL R 10 1 10 100 Frequency (MHz) 1000 FCB-0805-B102 FCB-0805-B601 10000 1000 XL 100 10 |Z|, XL, R (Ohm) |Z|, XL, R (Ohm) |Z| R 1 0.1 1 10 100 Frequency (MHz) 1000 |Z| 1000 XL 100 R 10 1 1 10 100 Frequency (MHz) 1000 SPECTRUM CONTROL INC. * 8031 Avonia Rd. * Fairview, PA 16415 * Phone: 814-474-2207 * Fax: 814-474-2208 * Web site: www.spectrumcontrol.com SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 27 *1566 PRINTER 03-62 12/4/06 9:06 AM Page 26 Surface Mount EMI Filters Ferrite Chip Beads Typical Impedance Characteristics (Curves not listed are available upon request or at our website.) 1206 Size FCB-1206-A300 FCB-1206-A500 |Z|, XL, R (Ohm) |Z|, XL, R (Ohm) 1000 100 |Z| 10 XL R 1 0.1 1 10 100 Frequency (MHz) 100 R |Z|, XL, R (Ohm) |Z| XL 10 R 1 1 10 100 Frequency (MHz) 100 1000 XL R 1 0.1 1000 |Z| 10 FCB-1206-A800 1 10 100 Frequency (MHz) 1000 FCB-1206-A900 1000 |Z| 100 |Z|, XL, R (Ohm) |Z|, XL, R (Ohm) 10 100 Frequency (MHz) FCB-1206-A700 1000 28 1 1000 100 XL 10 R 1 0.1 XL 1 FCB-1206-A600 0.1 |Z| 10 0.1 1000 1000 |Z|, XL, R (Ohm) Surface Mount Filters & Inductors 1000 1 10 100 Frequency (MHz) 1000 |Z| 100 10 R XL 1 0.1 1 10 100 Frequency (MHz) 1000 SPECTRUM CONTROL INC. * 8031 Avonia Rd. * Fairview, PA 16415 * Phone: 814-474-2207 * Fax: 814-474-2208 * Web site: www.spectrumcontrol.com SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 *1566 PRINTER 03-62 12/4/06 9:06 AM Page 27 Surface Mount EMI Filters Ferrite Chip Beads Typical Impedance Characteristics (Curves not listed are available upon request or at our website.) 1206 Size continued FCB-1206-A101 FCB-1206-A121 1000 XL 10 R 1 0.1 1 10 100 Frequency (MHz) XL 10 R 1 0.1 1000 |Z| 100 FCB-1206-A201 1 10 100 Frequency (MHz) FCB-1206-A301 1000 1000 |Z| 100 |Z|, XL, R (Ohm) |Z|, XL, R (Ohm) |Z| XL 10 R 1 0.1 1000 1 10 100 Frequency (MHz) 100 XL R 10 1 0.1 1000 Surface Mount Filters & Inductors |Z| 100 |Z|, XL, R (Ohm) |Z|, XL, R (Ohm) 1000 FCB-1206-A601 1 10 100 Frequency (MHz) 1000 FCB-1206-B102 1000 10000 R 10 1 0.1 |Z| 1000 XL 100 |Z|, XL, R (Ohm) |Z|, XL, R (Ohm) |Z| XL 100 R 10 1 1 10 100 Frequency (MHz) 1000 0.1 1 10 100 Frequency (MHz) 1000 SPECTRUM CONTROL INC. * 8031 Avonia Rd. * Fairview, PA 16415 * Phone: 814-474-2207 * Fax: 814-474-2208 * Web site: www.spectrumcontrol.com SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 29 *1566 PRINTER 03-62 12/4/06 9:06 AM Page 28 Surface Mount High Current EMI Filters Ferrite Power Beads Features Surface Mount Filters & Inductors Rated up to 6 Amps Broad range of impedance values available (Standard line has values of 7 to 600 ) Available in standard EIA/EIAJ chip sizes (0603/1608, 0805/2012, 1206/3216, etc.) Excellent solderability is achieved from a nickel barrier with a solder overplate Provides EMI attenuation without grounding Closed magnetic circuit Parts are suitable for flow or re-flow soldering Available in tape and reel for easy placement Operational temperature range of -55C to +125C W L H Applications Telecommunications equipment (cellular phones, cordless phones, faxes and ISDN's) Digital audio/visual equipment (TV, HDTV, VTR, DVD, CATV tuners and etc.) GPS and car navigation equipment High speed clocks Consumer electronics Signal lines LAN and WAN hardware B Part Numbering System Example: FPB-0805-A301P7 FPB 30 - 0805 Series Part Size Ferrite Power Beads EIA Size (Length x Width) - A 301 P 7 Material Characteristic Impedance Value Tolerance Code Packaging 30(1) Standard Value is P 7 = 7 inch reel Determined by the desired electrical characteristic (1) = the # of zeros that will follow the first two digits P = 25% 3 = 13 inch reel M = 20% Example: 30(1) = 30 followed by 1 zero = 300 Ohms Land Patterns and Soldering Temperature Profiles Packaging Specifications and Storage Requirements See page 45. See page 46. SPECTRUM CONTROL INC. * 8031 Avonia Rd. * Fairview, PA 16415 * Phone: 814-474-2207 * Fax: 814-474-2208 * Web site: www.spectrumcontrol.com SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 *1566 PRINTER 03-62 12/4/06 9:06 AM Page 29 Surface Mount High Current EMI Filters Ferrite Power Beads Physical Characteristics EIA Physical Dimensions EIAJ Length (L) Width (W) Height (H) Termination Band (B) 0603 1608 0.063 0.006 (1.60 0.15) 0.031 0.006 (0.80 0.15) 0.031 0.006 (0.80 0.15) 0.014 0.006 (0.36 0.15) 0805 2012 0.079 0.008 (2.00 0.20) 0.049 0.008 (1.25 0.20) 0.035 0.008 (0.90 0.20) 0.020 0.010 (0.51 0.25) 1206 3216 0.126 0.008 (3.20 0.20) 0.063 0.008 (1.60 0.20) 0.043 0.008 (1.10 0.20) 0.020 0.010 (0.51 0.25) 1806 4516 0.177 0.010 (4.50 0.25) 0.063 0.008 (1.60 0.20) 0.055 0.010 (1.40 0.25) 0.020 0.010 (0.51 0.25) 1812 4532 0.177 0.010 (4.50 0.25) 0.126 0.010 (3.20 0.25) 0.055 0.010 (1.40 0.25) 0.020 0.010 (0.51 0.25) Dimensions in inches (mm) Electrical Characteristics Standard FPB-1206 Sizes Standard FPB-0603 and FPB-0805 Sizes Part Number FPB-0603-A300P* FPB-0603-A600P* FPB-0805-A070P* FPB-0805-A100P* FPB-0805-A300P* FPB-0805-A600P* FPB-0805-A450P* FPB-0805-A800P* FPB-0805-A301P* FPB-0805-A601P* Impedance at 100 MHz 30 60 7 10 30 40 45 80 300 600 Max. DCR Max. Current mA Part Number 0.06 0.10 1,000 500 0.02 3,000 0.025 3,000 0.03 2,000 0.10 0.15 1,000 1,000 0.20 1,000 FPB-1206-A190P* FPB-1206-A260P* FPB-1206-A300P* FPB-1206-A310P* FPB-1206-A500P* FPB-1206-A700P* FPB-1206-A800P* FPB-1206-A900P* FPB-1206-A121P* FPB-1206-A601P* FPB-1206-E101P* FPB-1206-E121P* FPB-1206-E601P* Notes: * Please add packaging code at the end of part. To change Tolerance Code, replace P with other tolerance values. Consult factory for other impedance values of the 0603 and 0805 footprint that are available from Spectrum Control. Standard FPB-1806 and FPB-1812 Sizes Part Number FPB-1806-B600P* FPB-1806-B750P* FPB-1806-B800P* FPB-1812-A700P* FPB-1812-B121P* Impedance at 100 MHz 60 75 80 70 120 Max. DCR Max. Current mA 0.01 0.03 0.03 0.03 0.05 6,000 4,000 4,000 6,000 3,000 Impedance at 100 MHz 19 26 30 31 50 70 80 90 120 600 100 120 600 Max. DCR Max. Current mA 0.02 3,000 0.025 3,000 0.03 2,000 0.10 1,000 0.20 0.03 0.04 0.10 1,000 Surface Mount Filters & Inductors Size 3,000 1,500 Notes: * Please add packaging code at the end of part. To change Tolerance Code, replace P with other tolerance values. Consult factory for other impedance values of the 1206 footprint that are available from Spectrum Control. Notes: * Please add packaging code at the end of part. To change Tolerance Code, replace P with other tolerance values. Consult factory for other impedance values of the 1806 and 1812 footprint that are available from Spectrum Control. SPECTRUM CONTROL INC. * 8031 Avonia Rd. * Fairview, PA 16415 * Phone: 814-474-2207 * Fax: 814-474-2208 * Web site: www.spectrumcontrol.com SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 31 *1566 PRINTER 03-62 12/4/06 9:06 AM Page 30 Surface Mount High Current EMI Filters Ferrite Power Beads Typical Impedance Characteristics (Curves not listed are available upon request or at our website.) 0805 Size FPB-0805-A300 FPB-0805-A300 |Z|, XL, R (Ohm) |Z|, XL, R (Ohm) |Z| 10 XL R 1 1 10 100 Frequency (MHz) 100 0.00 A 0.67 A 10 1.33 A 1 0.1 1000 FPB-0805-A450 2.00 A 1 10 100 Frequency (MHz) 1000 FPB-0805-A450 1000 1000 |Z|, XL, R (Ohm) 100 |Z| 10 R XL 1 0.1 32 1000 100 0.1 |Z|, XL, R (Ohm) Surface Mount Filters & Inductors 1000 1 10 100 Frequency (MHz) 1000 100 0.00 A 0.67 A 10 1.33 A 2.00 A 1 0.1 1 10 100 Frequency (MHz) 1000 SPECTRUM CONTROL INC. * 8031 Avonia Rd. * Fairview, PA 16415 * Phone: 814-474-2207 * Fax: 814-474-2208 * Web site: www.spectrumcontrol.com SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 *1566 PRINTER 03-62 12/4/06 9:06 AM Page 31 Surface Mount High Current EMI Filters Ferrite Power Beads Typical Impedance Characteristics (Curves not listed are available upon request or at our website.) 1206 Size FPB-1206-A260 FPB-1206-A260 100 |Z| 10 XL R 1 0.1 1 10 100 Frequency (MHz) 100 0A 2A FPB-1206-A300 |Z|, XL, R (Ohm) |Z|, XL, R (Ohm) |Z| 10 XL R 1 1 10 100 Frequency (MHz) 1000 100 0A 1A 10 2A 3A 1 0.1 1000 FPB-1206-A500 1 10 100 Frequency (MHz) 1000 FPB-1206-A500 1000 1000 100 |Z| 10 |Z|, XL, R (Ohm) |Z|, XL, R (Ohm) 10 100 Frequency (MHz) 1000 100 XL R 1 0.1 1 FPB-1206-A300 1000 0.1 3A 1 0.1 1000 1A 10 Surface Mount Filters & Inductors 1000 |Z|, XL, R (Ohm) |Z|, XL, R (Ohm) 1000 1 10 100 Frequency (MHz) 1000 100 0A 1A 10 2A 3A 1 0.1 1 10 100 Frequency (MHz) 1000 SPECTRUM CONTROL INC. * 8031 Avonia Rd. * Fairview, PA 16415 * Phone: 814-474-2207 * Fax: 814-474-2208 * Web site: www.spectrumcontrol.com SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 33 *1566 PRINTER 03-62 12/4/06 9:06 AM Page 32 Surface Mount High Current EMI Filters Ferrite Power Beads Typical Impedance Characteristics (Curves not listed are available upon request or at our website.) 1206 Size continued FPB-1206-A700 FPB-1206-A700 |Z| |Z|, XL, R (Ohm) |Z|, XL, R (Ohm) 1000 100 XL 10 R 1 0.1 1 10 100 Frequency (MHz) 100 0.67 A |Z|, XL, R (Ohm) |Z| 10 100 Frequency (MHz) XL 10 R 1 1 10 100 Frequency (MHz) 100 1000 0.67 A 1.33 A 2.00 A 1 0.1 1000 0.00 A 10 FPB-1206-A900 1 10 100 Frequency (MHz) 1000 FPB-1206-A900 1000 |Z| 100 |Z|, XL, R (Ohm) |Z|, XL, R (Ohm) 1 FPB-1206-A800 1000 34 2.00 A 1000 100 XL 10 R 1 0.1 1.33 A 1 FPB-1206-A800 0.1 0.00 A 10 0.1 1000 1000 |Z|, XL, R (Ohm) Surface Mount Filters & Inductors 1000 1 10 100 Frequency (MHz) 1000 100 0.00 A 0.33 A 0.67 A 10 1.00 A 1 0.1 1 10 100 Frequency (MHz) 1000 SPECTRUM CONTROL INC. * 8031 Avonia Rd. * Fairview, PA 16415 * Phone: 814-474-2207 * Fax: 814-474-2208 * Web site: www.spectrumcontrol.com SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 *1566 PRINTER 03-62 12/4/06 9:06 AM Page 33 Surface Mount High Current EMI Filters Ferrite Power Beads Typical Impedance Characteristics (Curves not listed are available upon request or at our website.) 1206 Size continued FPB-1206-A121 FPB-1206-A121 1000 XL 10 R 1 0.1 1 10 100 Frequency (MHz) 0.33 A 1.00 A 1 FPB-1206-A601 R 1 0.1 1 1000 0.00 A XL 10 10 100 Frequency (MHz) FPB-1206-A601 |Z| 100 1 1000 |Z|, XL, R (Ohm) |Z|, XL, R (Ohm) 1000 0.67 A 10 0.1 1000 0.00 A 100 10 100 Frequency (MHz) 1000 100 Surface Mount Filters & Inductors |Z| 100 |Z|, XL, R (Ohm) |Z|, XL, R (Ohm) 1000 0.33 A 0.67 A 10 1.00 A 1 0.1 1 10 100 Frequency (MHz) 1000 SPECTRUM CONTROL INC. * 8031 Avonia Rd. * Fairview, PA 16415 * Phone: 814-474-2207 * Fax: 814-474-2208 * Web site: www.spectrumcontrol.com SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 35 *1566 PRINTER 03-62 12/4/06 9:06 AM Page 34 Surface Mount Ferrite Inductors Features Surface Mount Filters & Inductors Multilayer design Available in standard EIA/EIAJ chip sizes (0603/1608, 0805/2012, 1206/3216, etc.) Excellent solderability is achieved from a nickel barrier with a solder overplate Small footprint compared to wire wound inductors Prevents crosstalk with closed magnetic circuit Broad range of inductance values available from 47 nH to 4,700 nH High Q characteristics Parts are suitable for flow or re-flow soldering Available in tape and reel for easy placement Provides high reliability in a temperature range of -25C to +85C over a wide range of humidity Prevents electromagnetic interference to signals in high density circuits W L H B Applications Telecommunications equipment (cellular phones, cordless phones, faxes and ISDN's) Personal computers including disc drives, CD-ROM, etc. Digital audio/visual equipment (TV, HDTV, VTR, DVD, CATV tuners, etc.) Measuring equipment Most consumer electronics Part Numbering System Example: FIN-0805-C470M3 FIN 36 - 0805 Series Part Size Ferrite INductor EIA Size (Length x Width) - C 470 M 3 Material Characteristic Inductance L (nH) Tolerance Code Packaging 47(0) M = 20% 7 = 7 inch reel Determined by the desired electrical characteristic (0) = the # of zeros that will follow the first two digits K = 10% 3 = 13 inch reel J = 5% Example: 47(0) = 47 followed by 0 zeros = 47 nH Land Patterns and Soldering Temperature Profiles Packaging Specifications and Storage Requirements See page 45. See page 46. SPECTRUM CONTROL INC. * 8031 Avonia Rd. * Fairview, PA 16415 * Phone: 814-474-2207 * Fax: 814-474-2208 * Web site: www.spectrumcontrol.com SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 *1566 PRINTER 03-62 12/4/06 9:06 AM Page 35 Surface Mount Ferrite Inductors Physical Characteristics EIA 0603 Physical Dimensions EIAJ Length (L) Width (W) Height (H) Termination Band (B) 1608 0.063 0.006 (1.60 0.15) 0.031 0.006 (0.80 0.15) 0.031 0.006 (0.80 0.15) 0.014 0.006 (0.36 0.15) 0805 2012 0.079 0.008 (2.00 0.20) 0.049 0.008 (1.25 0.20) 1206 3216 0.126 0.008 (3.20 0.20) 0.063 0.008 (1.60 0.20) <2.7 uH 0.035 0.008 (0.90 0.20) 0.020 0.010 (0.51 0.25) 2.7 uH 0.049 0.008 (1.25 0.20) 0.043 0.008 (1.10 0.20) 0.020 0.010 (0.51 0.25) Dimensions in inches (mm) Electrical Characteristics Standard FIN-0603 Sizes Part Number Inductance L (nH) FIN-0603-C470* FIN-0603-C680* FIN-0603-C820* FIN-0603-C101* FIN-0603-C121* FIN-0603-C151* FIN-0603-C181* FIN-0603-C221* FIN-0603-C271* FIN-0603-C331* FIN-0603-C391* FIN-0603-C471* FIN-0603-C561* FIN-0603-C681* FIN-0603-C821* FIN-0603-G102* FIN-0603-G122* FIN-0603-G152* FIN-0603-G182* FIN-0603-G222* FIN-0603-G272* FIN-0603-G332* FIN-0603-G392* FIN-0603-G472* 47 68 82 100 120 150 180 220 270 330 390 470 560 680 820 1,000 1,200 1,500 1,800 2,200 2,700 3,300 3,900 4,700 Min. Q L, Q Test Frequency (MHz) 10 50 15 25 15 25 35 10 35 10 Min. SRF (MHz) 260 250 245 240 205 180 165 150 136 125 110 105 95 90 85 75 65 60 55 50 45 40 35 33 Max. DCR (Ohm) Max. Current (mA) 0.3 50 0.5 0.5 0.6 0.6 0.8 0.8 0.85 1.0 1.35 1.55 1.7 2.1 0.6 0.8 0.8 0.95 1.15 1.35 1.55 1.7 2.1 Surface Mount Filters & Inductors Size 50 35 25 15 Note: * Please add tolerance and packaging code at the end of part. SPECTRUM CONTROL INC. * 8031 Avonia Rd. * Fairview, PA 16415 * Phone: 814-474-2207 * Fax: 814-474-2208 * Web site: www.spectrumcontrol.com SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 37 *1566 PRINTER 03-62 12/4/06 9:06 AM Page 36 Surface Mount Ferrite Inductors Electrical Characteristics continued Surface Mount Filters & Inductors Standard FIN-0805 Sizes Part Number Inductance L (nH) FIN-0805-C470* FIN-0805-C680* FIN-0805-C820* FIN-0805-C101* FIN-0805-C121* FIN-0805-C151* FIN-0805-C181* FIN-0805-C221* FIN-0805-C271* FIN-0805-C331* FIN-0805-C391* FIN-0805-C471* FIN-0805-C561* FIN-0805-C681* FIN-0805-C821* FIN-0805-G102* FIN-0805-G122* FIN-0805-G152* FIN-0805-G182* FIN-0805-G222* FIN-0805-G272* FIN-0805-G332* FIN-0805-G392* FIN-0805-G472* FIN-0805-G103* 47 68 82 100 120 150 180 220 270 330 390 470 560 680 820 1,000 1,200 1,500 1,800 2,200 2,700 3,300 3,900 4,700 10,000 Min. Q L, Q Test Frequency (MHz) 15 50 Min. SRF (MHz) Max. DCR (Ohm) Max. Current (mA) 0.2 300 45 10 45 10 50 2 320 280 255 235 220 200 185 170 150 145 135 125 115 105 100 75 65 60 55 50 45 41 38 35 24 Min. Q L, Q Test Frequency (MHz) Min. SRF (MHz) Max. DCR (Ohm) 20 50 20 25 25 25 320 280 235 220 200 185 170 150 145 135 125 115 105 100 75 65 60 55 50 45 41 38 35 32 29 24 0.15 0.25 0.25 0.3 0.3 0.4 0.4 0.5 0.6 0.5 0.6 0.7 0.8 0.9 0.4 0.5 0.5 0.5 0.6 0.6 0.7 0.8 0.85 0.9 0.9 1.0 20 25 25 25 0.3 0.3 0.4 0.4 0.5 0.5 0.55 0.65 0.65 0.75 0.8 1.0 0.4 0.5 0.5 0.6 0.65 0.75 0.8 0.9 1.0 1.15 250 200 150 50 30 15 Note: * Please add tolerance and packaging code at the end of part. Standard FIN-1206 Sizes Part Number Inductance L (nH) FIN-1206-C470* FIN-1206-C680* FIN-1206-C101* FIN-1206-C121* FIN-1206-C151* FIN-1206-C181* FIN-1206-C221* FIN-1206-C271* FIN-1206-C331* FIN-1206-C391* FIN-1206-C471* FIN-1206-C561* FIN-1206-C681* FIN-1206-C821* FIN-1206-G102* FIN-1206-G122* FIN-1206-G152* FIN-1206-G182* FIN-1206-G222* FIN-1206-G272* FIN-1206-G332* FIN-1206-G392* FIN-1206-G472* FIN-1206-G562* FIN-1206-G682* FIN-1206-G103* 47 68 100 120 150 180 220 270 330 390 470 560 680 820 1,000 1,200 1,500 1,800 2,200 2,700 3,300 3,900 4,700 5,600 6,800 10,000 45 10 45 10 45 4 2 Max. Current (mA) 300 250 200 150 100 50 45 25 Note: * Please add tolerance and packaging code at the end of part. 38 SPECTRUM CONTROL INC. * 8031 Avonia Rd. * Fairview, PA 16415 * Phone: 814-474-2207 * Fax: 814-474-2208 * Web site: www.spectrumcontrol.com SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 *1566 PRINTER 03-62 12/4/06 9:06 AM Page 37 Surface Mount Ferrite Inductors Typical Inductance Characteristics (Curves not listed are available upon request or at our website.) 0603 Size FIN-0603 FIN-0603 10000 60 2700 nH 2700 nH 1200 nH 50 40 Q L (nH) 1000 390 nH 100 30 20 390 nH 100 nH 10 1 10 10 100 Frequency (MHz) 0 1000 100 nH 1 10 100 Frequency (MHz) 1000 0805 Size FIN-0805 FIN-0805 10000 60 4700 nH 4700 nH 50 1500 nH Surface Mount Filters & Inductors 1200 nH 1500 nH 1000 40 Q L (nH) 560 nH 68 nH 100 30 68 nH 20 560 nH 10 10 1 10 100 Frequency (MHz) 0 1000 1 10 100 Frequency (MHz) 1000 1206 Size FIN-1206 10000 FIN-1206 80 5600 nH 5600 nH 70 2200 nH 2200 nH 60 1000 820 nH L (nH) 50 Q 820 nH 40 30 100 20 150 nH 10 1 10 100 Frequency (MHz) 10 1000 0 150 nH 1 10 100 Frequency (MHz) 1000 SPECTRUM CONTROL INC. * 8031 Avonia Rd. * Fairview, PA 16415 * Phone: 814-474-2207 * Fax: 814-474-2208 * Web site: www.spectrumcontrol.com SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 39 *1566 PRINTER 03-62 12/4/06 9:06 AM Page 38 Surface Mount High Frequency Ceramic Chip Inductors Features Surface Mount Filters & Inductors High Q characteristics at high frequency and self-resonant frequency Available in standard EIA/EIAJ chip sizes (0402/1005, 0603/1608, 0805/2012, etc.) Excellent solderability is achieved from a nickel barrier with a solder overplate Parts are suitable for flow or re-flow soldering Available in tape and reel for easy placement Provides high reliability in a temperature range of -40C to +125C over a wide range of humidity Parts can be used at frequency up to 6 GHz with Q values of 10 to 23 at 100 MHz, up to 63 at 800 MHz Standard inductance range of 1.0 to 100 nH W L H Applications Designed to address surface mountable inductor needs at high frequency Telecommunications equipment (cellular phones, pagers, etc.) Computer communication equipment Radar detectors Any high frequency circuits B Note: The ceramic chip inductors have a blue strip on one side of the part to allow for proper placement. The blue strip needs to be on the top side, away from the board to get proper electrical characteristics. Part Numbering System Example: CIN-0402-H8D2JB CIN - Series Ceramic INductor 0402 - Part Size EIA Size (Length x Width) H 8D2 J B Material Characteristic Inductance Code Tolerance Code Packaging Value is measured in nH S = 0.3 nH 7 = 7 inch reel Determined by the desired electrical characteristic D stands for decimal point T = 3% 3 = 13 inch reel 8D2 = 8.2 nH J = 5% K = 10% M = 20% Note: Please check tables for available tolerances on individual parts. 40 Land Patterns and Soldering Temperature Profiles Packaging Specifications and Storage Requirements See page 45. See page 46. SPECTRUM CONTROL INC. * 8031 Avonia Rd. * Fairview, PA 16415 * Phone: 814-474-2207 * Fax: 814-474-2208 * Web site: www.spectrumcontrol.com SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 *1566 PRINTER 03-62 12/4/06 9:06 AM Page 39 Surface Mount High Frequency Ceramic Chip Inductors Physical Characteristics EIA Physical Dimensions EIAJ Length (L) Width (W) Height (H) Termination Band (B) 0402 1005 0.039 0.004 (1.00 0.10) 0.02 0.004 (0.50 0.10) 0.02 0.004 (0.50 0.10) 0.01 0.004 (0.25 0.10) 0603 1608 0.063 0.006 (1.60 0.15) 0.031 0.006 (0.80 0.15) 0.031 0.006 (0.80 0.15) 0.012 0.008 (0.30 0.20) Dimensions in inches (mm) Electrical Characteristics Standard CIN-0402 Sizes Part Number Inductance L (nH) CIN-0402-H1D0S* CIN-0402-H1D2S* CIN-0402-H1D5S* CIN-0402-H1D8S* CIN-0402-H2D2S* CIN-0402-H2D7S* CIN-0402-H3D3** CIN-0402-H3D9** CIN-0402-H4D7** CIN-0402-H5D6** CIN-0402-H6D8** CIN-0402-H8D2** CIN-0402-H10D** CIN-0402-H12D** CIN-0402-H15D** CIN-0402-H18D** CIN-0402-H22D** CIN-0402-H27D** CIN-0402-H33D** CIN-0402-H39D** CIN-0402-H47D** CIN-0402-H56D** 1.0 1.2 1.5 1.8 2.2 2.7 3.3 3.9 4.7 5.6 6.8 8.2 10 12 15 18 22 27 33 39 47 56 Available Tolerances S J K 0.3 nH 5% 10% X X X X X X X X X X Typ. Q (100 MHz) 11 Typ. Q (800 MHz) 34 Typ. SRF (MHz) 4,000 30 29 X X X X X X X X X X X X X X X X X X X X X X X X X X X X 10 4,000 28 10 28 30 31 11 11 30 27 25 24 23 21 3,900 3,600 3,200 2,700 2,300 2,100 1,900 1,600 1,300 1,200 1,000 750 Max. DCR (Ohm) 0.12 0.12 0.13 0.14 0.16 0.17 0.19 0.22 0.24 0.27 0.32 0.37 0.42 0.50 0.55 0.65 0.8 0.9 1.0 1.2 1.3 1.4 Max. Current (mA) 300 300 Surface Mount Filters & Inductors Size 250 250 200 150 Notes: * Please add packaging code at the end of part. ** Please add tolerance and packaging code at the end of part. SPECTRUM CONTROL INC. * 8031 Avonia Rd. * Fairview, PA 16415 * Phone: 814-474-2207 * Fax: 814-474-2208 * Web site: www.spectrumcontrol.com SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 41 *1566 PRINTER 03-62 12/4/06 9:06 AM Page 40 Surface Mount High Frequency Ceramic Chip Inductors Electrical Characteristics continued Surface Mount Filters & Inductors Standard CIN-0603 Sizes 42 Part Number Inductance L (nH) S 0.3 nH CIN-0603-H1D5S* CIN-0603-H1D8S* CIN-0603-H2D2S* CIN-0603-H2D7S* CIN-0603-H3D3** CIN-0603-H3D9** CIN-0603-H4D7** CIN-0603-H5D6** CIN-0603-H6D8** CIN-0603-H8D2** CIN-0603-H10D** CIN-0603-H12D** CIN-0603-H15D** CIN-0603-H18D** CIN-0603-H22D** CIN-0603-H27D** CIN-0603-H33D** CIN-0603-H39D** CIN-0603-H47D** 1.5 1.8 2.2 2.7 3.3 3.9 4.7 5.6 6.8 8.2 10 12 15 18 22 27 33 39 47 X X X X X X X X Available Tolerances T J K 3% 5% 10% X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X Typ. Q (100 MHz) Typ. Q (800 MHz) Typ. SRF (MHz) Max. DCR (Ohm) Max. Current (mA) 12 40 36 37 >6,000 0.10 300 >6,000 5,700 5,600 4,800 4,350 3,750 3,300 2,850 2,700 2,400 2,050 1,850 1,750 1,500 1,350 1,200 0.10 0.12 0.14 0.16 0.18 0.22 0.24 0.26 0.28 0.32 0.35 0.4 0.45 0.55 0.6 0.7 13 41 42 14 43 15 43 16 17 44 40 35 300 300 300 300 Notes: * Please add packaging code at the end of part. ** Please add tolerance and packaging code at the end of part. SPECTRUM CONTROL INC. * 8031 Avonia Rd. * Fairview, PA 16415 * Phone: 814-474-2207 * Fax: 814-474-2208 * Web site: www.spectrumcontrol.com SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 *1566 PRINTER 03-62 12/4/06 9:06 AM Page 41 Surface Mount High Frequency Ceramic Chip Inductors Typical Impedance Characteristics (Curves not listed are available upon request or at our website.) 0402 Size 500 CIN-0402 100 CIN-0402 CIN-0402-1D5S 80 CIN-0402-47D Q L (nH) CIN-0402-3D3 60 CIN-0402-27D CIN-0402-15D CIN-0402-6D8 40 10 CIN-0402-15D CIN-0402-6D8 CIN-0402-27D CIN-0402-3D3 20 CIN-0402-1D5S 1 CIN-0402-47D 0 1 2.5 5 Frequency (GHz) 10 10 100 1000 Frequency (MHz) 10000 0603 Size 100 CIN-0603 100 CIN-0603 90 80 Surface Mount Filters & Inductors 100 CIN-0603-1D5 CIN-0603-10D CIN-0603-8D2 CIN-0603-6D8 CIN-0603-5D6 CIN-0603-4D7 10 CIN-0603-3D3 CIN-0603-2D2 CIN-0603-1D5 1 10 100 1000 Frequency (MHz) 10000 CIN-0603-3D3 60 Q L (nH) 70 CIN-0603-2D2 CIN-0603-6D8 CIN-0603-4D7 CIN-0603-8D2 CIN-0603-5D6 50 40 30 CIN-0603-10D 20 10 0 10 100 1000 Frequency (MHz) 10000 SPECTRUM CONTROL INC. * 8031 Avonia Rd. * Fairview, PA 16415 * Phone: 814-474-2207 * Fax: 814-474-2208 * Web site: www.spectrumcontrol.com SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 43 *1566 PRINTER 03-62 12/4/06 9:06 AM Page 42 Terminology Inductance Self-Resonant Frequency (SRF) Inductance is the ability of a conductor to produce induced voltage when the current varies. The symbol for inductance is L and the unit is Henry (H). When the frequency changes, the capacitive reactance Xc and inductive reactance XL also change. The selfresonance frequency is the frequency at which the XL equals Xc. At self-resonance frequency, the inductor shows maximum impedance and a minimum line current. The SRF shall generally be specified as at least twice the application frequency, except for some special applications. The SRF of Spectrum Control's inductors is measured by using an HP4291A Impedance Analyzer/HP8753D Network Analyzer. Surface Mount Filters & Inductors 1 H = 1,000 mH (milli Henry) 1 H = 1,000,000 H (micro Henry) 1 H = 1,000,000,000 nH (nano Henry) Inductance of Spectrum Control's inductors is measured by using an HP4191A/HP4291A/HP4286A Impedance Analyzer. Impedance Impedance is the measure of opposition to a current. The symbol for impedance is Z and the unit is Ohm. Z = R 2 + XL2 Where R is the resistance (not DC resistance) and XL is the reactance. Z, R and XL are all frequency dependent. Impedance of Spectrum Control's chip beads is measured by using an HP4291A/HP4286A Impedance Analyzer. Direct Current Resistance (DCR) DCR is the resistance of the component measured with direct current. DCR of Spectrum Control's inductive components is measured by using an HP4338A milli-ohmmeter. Quality Factor (Q) Q is the quality factor of an inductor. It is the ratio of the inductor's ability to produce self-induced voltage over the resistance that reduces the current and the induced voltage. It can be considered as the ratio of the inductor's capability to store energy over the capability to consume energy. Q = XL R Q is highly dependent on frequency. Q values of Spectrum Control's inductors are measured by using an HP4291A Impedance Analyzer/HP8753D Network Analyzer. Maximum Rated Current Maximum rated current is a measure of the current carrying capacity of the component. When the maximum rated current is applied to the component, the temperature rise shall not exceed 20C. Equivalent Circuit of an Inductor R L C Using an ideal resistor, an ideal capacitor and an ideal inductor, a real inductor can be simulated. The resistor component in an equivalent circuit comes from the DC resistance of the electrode and the electromagnetic loss. The capacitive component comes from the parasitic capacitance of the coil. 44 SPECTRUM CONTROL INC. * 8031 Avonia Rd. * Fairview, PA 16415 * Phone: 814-474-2207 * Fax: 814-474-2208 * Web site: www.spectrumcontrol.com SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 *1566 PRINTER 03-62 12/4/06 9:06 AM Page 43 Land Patterns and Soldering Temperature Profiles Recommended PC Board Land Patterns A B C 0402 (1005) 0.051 (1.3) 0.020 (0.5) 0.016 (0.4) 0603 (1608) 0.102 (2.6) 0.031 (0.8) 0.023 (0.6) 0805 (2012) 0.118 (3.0) 0.039 (1.0) 0.039 (1.0) 1206 (3216) 0.173 (4.4) 0.055 (1.4) 0.087 (2.2) B C A 1806 (4516) 0.217 (5.5) 0.055 (1.4) 0.118 (3.0) Dimensions in inches (mm) Recommended Temperature Profiles for Soldering Recommended Temperature Profile for Wave Soldering Preheat 100 Seconds Max. Soldering 10 Seconds Max. 250C Recommended Temperature Profile for Reflow Soldering Natural Cooling Preheat 100 Seconds Max. Soldering 10 Seconds Max. Surface Mount Filters & Inductors Chip Size EIA (EIAJ) Natural Cooling 250C 200C 150C 150C 20 Seconds Max. 60 Seconds Min. 60 Seconds Min. SPECTRUM CONTROL INC. * 8031 Avonia Rd. * Fairview, PA 16415 * Phone: 814-474-2207 * Fax: 814-474-2208 * Web site: www.spectrumcontrol.com SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 45 *1566 PRINTER 03-62 12/4/06 9:06 AM Page 44 Packaging and Storage Packaging Specifications Spectrum Control's multilayer components are provided on tape-and-reel for use in pick-and-place machines or in bulk Dimensions of Plastic Embossed Tape Surface Mount Filters & Inductors Tape 0402 (1005) 0505 (1313) 0603 (1608) 0805 (2012) 1111 (2828) 1206 (3216) 1806 (4516) 2525 (6464) 4040 (102102) Tape B0 K0 0.045 0.004 0.031 0.004 (1.15 0.1) (0.8 0.1) 0.078 0.023 0.068 0.023 (2.0 0.6) (1.7 0.6) 0.075 0.004 0.043 0.004 (1.9 0.1) (1.1 0.1) 0.093 0.004 0.046 0.004 (2.4 0.1) (1.2 0.1) 0.138 0.023 0.135 0.028 (3.5 0.6) (3.4 0.7) 0.138 0.004 0.048 0.004 (3.5 0.1) (1.2 0.1) 0.193 0.004 0.079 0.004 (4.9 0.1) (2.0 0.1) 0.278 0.023 0.148 0.023 (7.0 0.6) (3.7 0.6) 0.428 0.023 0.148 0.023 (10.9 0.6) (3.7 0.6) Dimensions in inches (mm) A0 0.026 0.004 (0.65 0.1) 0.078 0.023 (2.0 0.6) 0.043 0.004 (1.1 0.1) 0.063 0.004 (1.6 0.1) 0.138 0.023 (3.5 0.6) 0.071 0.004 (1.8 0.1) 0.075 0.004 (1.9 0.1) 0.278 0.023 (7.0 0.6) 0.428 0.023 (10.9 0.6) E1 F W 0.318 0.002 0402 (3.5 0.05) (1005) 0.315 0.012 0505 (8.0 0.30) (1313) 0603 (1608) 0.138 0.002 0805 (3.5 0.05) (2012) 0.069 0.004 0.318 0.004 1111 (1.75 0.1) (8.1 0.1) (2828) 1206 (3216) 1806 (4516) 0.217 0.002 0.472 0.012 2525 (5.5 0.05) (12.0 0.30) (6464) 0.295 0.004 0.630 0.012 4040 (7.5 0.10) (16.0 0.30) (102102) Note: Other sizes can be provided upon customers' request. P1 for special applications. Both tape-and-reel and bulk products are sealed in plastic bags with desiccant. Standard reel size is 7 inch, 13 inch reels are available upon request. D0 P0 B0 E1 W F P1 D1 P0 0.079 0.004 (2.0 0.1) P2 K0 A0 D0 D1 0.040 0.002 (1.0 0.05) N/A 0.157 0.004 (4.0 0.1) t P2 0.157 0.004 (4.0 0.1) t 0.009 0.001 (0.23 0.02) 0.016 max. (0.400 max.) 0.0039 max. (1.0 max.) 0.079 0.002 (2.0 0.05) 0.059 + 0.004/-0 0.059 + 0.004/-0 0.009 0.001 (0.23 0.02) (1.5 + 0.1/-0) (1.5 + 0.1/-0) 0.0039 max. (1.0 max.) Consult factory N/A 0.059 min. (1.5 min.) 0.016 max. (0.400 max.) Dimensions in inches (mm) Chip Size Parts on 7 inch (178 mm) Reel 0402 (1005) 10,000 4,000 0505 (1313) 0603 (1608) 4,000 0805 (2012) 4,000 * 1111 (2828) 3,000 1206 (3216) 3,000 1806 (4516) 2,000 1812 (4532) 1,000 2525 (6464) 1,000 4040 (102102) -- Note: * Ferrite inductors in 0805 size with an inductance value of 2.7 H are packaged 2,000 per 7" reel. Parts on 13 inch (330 mm) Reel -- 15,000 12,000 10,000 10,000 10,000 10,000 -- 5,000 1,000 Storage Requirements The maximum ambient temperature shall not exceed 40C. Storage temperatures higher than 40C could result in the deformation of packaging materials. The maximum relative humidity recommended for storage is 70%. High humidity with high temperature can accelerate the oxidation of the tin-lead plating on the termination and reduce the 46 solderability of the components. Sealed plastic bags with desiccant shall be used to reduce the oxidation of the termination and shall only be opened prior to use. The products shall not be stored in areas where harmful gases containing sulfur or chlorine are present. SPECTRUM CONTROL INC. * 8031 Avonia Rd. * Fairview, PA 16415 * Phone: 814-474-2207 * Fax: 814-474-2208 * Web site: www.spectrumcontrol.com SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 *1566 PRINTER 03-62 12/4/06 9:06 AM Page 45 Competitive Part Number Cross Reference Spectrum Control FCB/FPB (size) xxxx KOA Speer MCB/MCP (size) xxxx Murata BLM (size) xxxx Philips MLS (size) Steward HI/MI/LI/HZ (size) xxxx Taiyo Yuden Taiyo Yuden BK (size) xxxx FBM (size) xxxx TDK TDK TDK TDK ACB (size) xxxx HF50/70/30 (size) xxxx MMZ (size) xxxx MPZ (size) xxxx Tecstar TB/TI/TC Tokin N (size) xxxx Vishay Dale ILHB/ILBB/ILB (size) xxxx Spectrum Control Ferrite Inductor (FIN) Series Cross References Spectrum Control FIN (size) xxxx KOA Speer MCI (size) xxxx Murata LQG (size) N Steward IC (size) xxxx Taiyo Yuden LK (size) xxxx TDK MLF (size) xxxx Tecstar TL (size) xxxx Vishay Dale ILSB (size) xxxx Surface Mount Filters & Inductors Spectrum Control Ferrite Chip Bead (FCB) and Ferrite Power Bead (FPB) Series Cross References Spectrum Control Ceramic Inductor (CIN) Series Cross References Spectrum Control CIN (size) xxxx KOA Speer MHI (size) xxxx Murata LQG (size) A Taiyo Yuden HK (size) xxxx TDK MLG/R (size) xxxx Tecstar TF (size) xxxx Toko LL (size) xxxx SPECTRUM CONTROL INC. * 8031 Avonia Rd. * Fairview, PA 16415 * Phone: 814-474-2207 * Fax: 814-474-2208 * Web site: www.spectrumcontrol.com SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 47 *1566 PRINTER 03-62 12/4/06 9:06 AM Page 46 Surface Mount EMI Filters Three Terminal Chips Surface Mount Filters & Inductors Features Excellent performance in high current applications Non-polar, surface mountable Superior filtering characteristics Superb ability to withstand transient voltages and surge Offers exceptional solderability and resistance to solder heat Available in 0805, 1205 and 1806 body size Typical Electrical Characteristics Two amp current rating available Capacitance Range. . . . . . . . . . . . . . . . . COG (NPO) 22 pF to 470 pF . . . . . . . . . . . . . . . . . . . . . X7R 470 pF to 47,000 pF Applications Cellular telephones and base stations Telecommunication equipment Industrial electronic interface or programmable controllers Electronic automotive equipment Computer and peripheral equipment Circuit Schematic Input Output Capacitance Tolerance . . . . . . . . . . . . . . COG (NPO) +50/-20% . . . . . . . . . . . . . . . . . . . . . X7R +50/-20% Temperature Coefficient. . . . . . . . . . . . . . COG (NPO) ..................... . . . . . . . . . . . . . . . . . . . . . X7R ..................... 0 /30 ppm/C, -55 to +125C +/-15%, -55 to +125C Insulation Resistance. . . . . . . . . . . . . . up to 22,000 pF 10000 Megohms . . . . . . . . . . . . . . . . . . . . . 47,000 pF 5000 Megohms DC Resistance. . . . . . . . . . . . . . 0.4 Amp or less 0.3 ohm max. . . . . . . . . . . . . . . . . . . . . . 1 Amp 0.08 ohm max. . . . . . . . . . . . . . . . . . . . . . 2 Amp 0.04 ohm max. 48 SPECTRUM CONTROL INC. * 8031 Avonia Rd. * Fairview, PA 16415 * Phone: 814-474-2207 * Fax: 814-474-2208 * Web site: www.spectrumcontrol.com SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 *1566 PRINTER 03-62 12/4/06 9:06 AM Page 47 Surface Mount EMI Filters Three Terminal Chips Rated Rated IR DC Body Capacitance Capacitance Temp. Voltage Current (Megohms Resistance Size (in picofarad) Tolerance Charact. (Volts DC) (Amps DC) Min.) (ohm Max.) Operating Temp. SF0805C220SBNC-* 0805 22 +50/-20% COG 50 0.4 10,000 0.3 -55/+125C SF0805C470SBNC-* 0805 47 +50/-20% COG 50 0.4 10,000 0.3 -55/+125C SF0805C101SBNC-* 0805 100 +50/-20% COG 50 0.4 10,000 0.3 -55/+125C SF0805C221SBNC-* 0805 220 +50/-20% COG 50 0.4 10,000 0.3 -55/+125C SF0805X471SBNC-* 0805 470 +50/-20% X7R 50 0.4 10,000 0.3 -55/+125C SF0805X102SBNC-* 0805 1,000 +50/-20% X7R 50 0.4 10,000 0.3 -55/+125C SF0805X222SBNC-* 0805 2,200 +50/-20% X7R 50 0.4 10,000 0.3 -55/+125C SF0805X223SBND-* 0805 22,000 +50/-20% X7R 50 1.0 10,000 0.08 -55/+125C SF1205C220SBNB-* 1205 22 +50/-20% COG 50 0.3 10,000 0.3 -55/+125C SF1205C470SBNB-* 1205 47 +50/-20% COG 50 0.3 10,000 0.3 -55/+125C SF1205C101SBNB-* 1205 100 +50/-20% COG 50 0.3 10,000 0.3 -55/+125C SF1205C221SBNB-* 1205 220 +50/-20% COG 50 0.3 10,000 0.3 -55/+125C SF1205X471SBNB-* 1205 470 +50/-20% X7R 50 0.3 10,000 0.3 -55/+125C SF1205X102SBNB-* 1205 1,000 +50/-20% X7R 50 0.3 10,000 0.3 -55/+125C SF1205X222SBNB-* 1205 2,200 +50/-20% X7R 50 0.3 10,000 0.3 -55/+125C SF1205X223SBNB-* 1205 22,000 +50/-20% X7R 50 0.3 10,000 0.3 -55/+125C SF1205X473SBND-* 1205 47,000 +50/-20% X7R 50 1.0 5,000 0.08 -55/+125C SF1806C220SDNB-* 1806 22 +50/-20% COG 100 0.3 10,000 0.3 -55/+125C SF1806C470SDNB-* 1806 47 +50/-20% COG 100 0.3 10,000 0.3 -55/+125C SF1806C101SDNB-* 1806 100 +50/-20% COG 100 0.3 10,000 0.3 -55/+125C SF1806C221SDNB-* 1806 220 +50/-20% COG 100 0.3 10,000 0.3 -55/+125C SF1806C471SDNB-* 1806 470 +50/-20% COG 100 0.3 10,000 0.3 -55/+125C SF1806X102SDNB-* 1806 1,000 +50/-20% X7R 100 0.3 10,000 0.3 -55/+125C SF1806X222SDNB-* 1806 2,200 +50/-20% X7R 100 0.3 10,000 0.3 -55/+125C SF1806X103SDNB-* 1806 10,000 +50/-20% X7R 100 0.3 10,000 0.3 -55/+125C SF1806X223SDNB-* 1806 22,000 +50/-20% X7R 100 0.3 10,000 0.3 -55/+125C 2 AMP FILTER SF1806Y224ZBNE-* 1806 220,000 +80/-20% Y5V 50 2.0 1,000 0.04 -25/+85C Part Number Surface Mount Filters & Inductors Selection Guide Bold Letter = High Current Applications -* = Denotes Packaging Style. Replace with T for Tape and Reel or B for Bulk = Temperature Characteristic is +30/-80% SPECTRUM CONTROL INC. * 8031 Avonia Rd. * Fairview, PA 16415 * Phone: 814-474-2207 * Fax: 814-474-2208 * Web site: www.spectrumcontrol.com SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 49 *1566 PRINTER 03-62 12/4/06 9:06 AM Page 48 Surface Mount EMI Filters Three Terminal Chips Insertion Loss (Per MIL-STD-220) SF0805 Series 80 0.4 Amp 80 70 Insertion Loss (dB) Insertion Loss (dB) 60 50 100 40 220 470 30 1,000 2,200 20 47 22 10 1 10 100 Frequency (MHz) 60 50 22,000 40 30 20 10 0 1000 1 10 100 Frequency (MHz) 1000 SF1205 Series 80 0.3 Amp 80 70 60 50 100 40 22,000 30 220 470 1,000 20 2,200 10 0 1 Amp 70 47 Insertion Loss (dB) Insertion Loss (dB) Surface Mount Filters & Inductors 70 0 1 Amp 10 100 Frequency (MHz) 50 47,000 40 30 20 10 22 1 60 0 1000 0.1 1 10 Frequency (MHz) 100 1000 10 Frequency (MHz) 100 1,000 SF1806 Series 80 0.3 Amp 80 70 60 50 100 40 30 220 10,000 22,000 20 470 1,000 2,200 10 0 50 Insertion Loss (dB) Insertion Loss (dB) 70 2 Amp 1 10 100 Frequency (MHz) 47 22 1000 60 50 220,000 40 30 20 10 0 0.1 1 SPECTRUM CONTROL INC. * 8031 Avonia Rd. * Fairview, PA 16415 * Phone: 814-474-2207 * Fax: 814-474-2208 * Web site: www.spectrumcontrol.com SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 *1566 PRINTER 03-62 12/4/06 9:06 AM Page 49 LE LE LM T Surface Mount EMI Filters Three Terminal Chips L Mechanical Dimensions Dimensions in inches (mm) Body Length (L) Body Width (W) Body Thickness (T) End Terminal Length (LE) Middle Terminal Length (LM) SF0805 0.079 +/-0.008 (2.0 +/-0.2) 0.049 +/-0.008 (1.25 +/-0.2) 0.032 +/-0.008 (0.8 +/-0.2) 0.012 +/-0.008 (0.3 +/-0.2) 0.024 +/-0.008 (0.6 +/-0.2) SF1205 0.126 +/-0.008 (3.2 +/-0.2) 0.049 +/-0.008 (1.25 +/-0.2) 0.028 +/-0.008 (0.7 +/-0.2) 0.016 +/-0.012 (0.4 +/-0.3) 0.043 +/-0.012 (1.1 +/-0.3) SF1806 0.177 +/-0.012 (4.5 +/-0.3) 0.063 +/-0.012 (1.6 +/-0.3) 0.039 +/-0.012 (1.0 +/-0.3) 0.020 +/-0.012 (0.5 +/-0.3) 0.055 +/-0.012 (1.4 +/-0.3) Body Style/Size Ordering Information Example: SF0805C221SBNCT Surface Mount Filters & Inductors W This part number represents a three terminal chip with a body size of 0805 with a COG (NPO) dielectric. The capacitance is 220 pF with a capacitance tolerance of +50%/-20%. Voltage rating is 50 Volts DC. It has nickel barrier, solder plated terminations and a current rating of 0.4 Amp, (400 milliamps). The parts are taped and reeled. SF 0805 Style Size SF 0805 1205 1806 C 221 S B N C T Ceramic Capacitance Code Capacitance Tolerance Rated Voltage (Vdc) Termination Current Rating Packaging B - 50 D - 100 N - Ni Barrier, Solder Plated B - 0.3 A C - 0.4 A D- 1A E- 2A T - Tape and Reel B - Bulk C - COG X - X7R Y - Y5V First Two Numbers are Significant, the Third Number Refers to Number of Zeroes S - +50%/-20% Z - +80%/-20% SPECTRUM CONTROL INC. * 8031 Avonia Rd. * Fairview, PA 16415 * Phone: 814-474-2207 * Fax: 814-474-2208 * Web site: www.spectrumcontrol.com SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 51 *1566 PRINTER 03-62 12/4/06 9:06 AM Page 50 Surface Mount EMI Filters Three Terminal Chips Soldering Specifications Soldering Instructions Reflow Soldering Flow Soldering Recommended Board Pattern Recommended Board Pattern Top view Top view Bottom view Surface Mount Filters & Inductors Bottom view E D Connects to top C A B A Through hole .016 to .024 (0.4 to 0.6) Copper Copper SF0805 SF1205 SF1806 Dimension B 0.059 (1.5) 0.091 (2.3) 0.138 (3.5) A 0.024 (0.6) 0.051 (1.3) 0.079 (2.0) C 0.039 (1.0) 0.047 (1.2) 0.051 (1.3) Preheat Body Style/Size SF0805 SF1205 SF1806 Solder Dimension A B C D E F 0.024 0.031 0.059 0.039 0.087 0.024 (0.6) (0.8) (1.5) (1.0) (2.2) (0.6) 0.051 0.059 0.091 0.047 0.118 0.024 (1.3) (1.5) (2.3) (1.2) (3.0) (0.6) 0.059 0.079 0.138 0.051 0.118 0.024 (1.5) (1.5) (3.5) (1.3) (3.0) (0.6) Recommended Solder Temperature Profile Cool down Preheat 250 Solder Cool down 250 220 to 240C 200 Degrees (C) Degrees (C) Through hole .016 to .024 (0.4 to 0.6) Flow Soldering Recommended Solder Temperature Profile 150 100 Connects to top Board Pattern Dimensions in inches (mm) Board Pattern Dimensions in inches (mm) Body Style/Size B Resist C Reflow Soldering 130 to 150C 50 220 to 250C 200 150 100 130 to 150C 50 0 0 60-120 10 max. Seconds 120 min. General Soldering Notes 1. High soldering temperatures and long soldering times can cause leaching of the termination and adversely affect adhesion. These conditions can also decrease capacitance value. Use the above recommended solder temperature cycle. 2. Due to the mechanical characteristic of ceramic composition, aggressive thermal shock will degrade performance. Preheat the assembly before soldering using the above solder temperature profile as a guide. 52 F 60-120 3-4 Seconds 120 min. 3. Use mild flux (less than 0.2% by weight of Chlorine), preferable rosin based. If water soluble, wash thoroughly to assure all residue is removed from the underside of components. 4. Ultrasonic Cleaning When using an ultrasonic cleaning method, the following range is recommended: Frequency: Not to exceed 28KHz Output Power: Not to exceed 20W/liter Cleaning Time: 5 minutes max SPECTRUM CONTROL INC. * 8031 Avonia Rd. * Fairview, PA 16415 * Phone: 814-474-2207 * Fax: 814-474-2208 * Web site: www.spectrumcontrol.com SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 *1566 PRINTER 03-62 12/4/06 9:06 AM Page 51 Package Information Paper Tape Dimensions SF0805 and SF1205 Bodies Surface Mount EMI Filters Three Terminal Chips Packaging Specifications D1 C2 C1 C T1 E F W Package Quantities B Tape and Reel SF0805 SF1205 SF1806 4,000 units/reel 4,000 units/reel 2,000 units/reel T A Dimensions in inches (mm) Chip Cavity Body Style/ Size Length A Width B SF0805 0.064 +/-0.008 0.091 +/-0.008 (1.62 +/-0.2) (2.3 +/-0.2) SF1205 0.067 +/-0.008 0.138 +/-0.008 (1.70 +/-0.2) (3.5 +/-0.2) Width W Tape Center to End F Indexing to End E Center to Center C Holes Indexing to Center C1 Indexing to Indexing C2 Indexing D1 0.315 +/-0.012 0.138 +/-0.002 0.069 +/-0.004 0.157 +/-0.004 0.079 +/-0.004 0.157 +/-0.008 0.059 +0.004/-0 (4.0 +/-0.1) (1.5 +0.1/-0) (1.1) (1.0) 0.157 +/-0.008 0.059 +0.004/-0 0.043 0.039 (4.0 +/-0.1) (1.5 +0.1/-0) (1.1) (1.0) (8.0 +/-0.3) (3.5 +/-0.05) (1.75 +/-0.1) 0.315 +/-0.012 0.138 +/-0.002 0.069 +/-0.004 (8.0 +/-0.3) (3.5 +/-0.05) (1.75 +/-0.1) (4.0 +/-0.1) (2.0 +/-0.1) 0.157 +/-0.004 0.079 +/-0.004 (4.0 +/-0.1) (2.0 +/-0.1) Hole Diameter Thickness Carrier Overall Tape T (Max.) T1 (Max.) 0.043 0.039 Package Information Tape and Reel Specification Plastic Carrier Tape Dimensions SF1806 Body D1 C1 C C2 Surface Mount Filters & Inductors Body Style/Size T1 E Plastic Reel Dimensions Body Style/Size Diameter (Max.) Width (Max.) SF0805 SF1205 SF1806 7.00 (180) 7.00 (180) 7.00 (180) 0.46 (11.5) 0.46 (11.5) 0.61 (11.5) F W Dimensions in inches (mm) B A oD Center hole T Dimensions in inches (mm) Chip Cavity Body Style/ Size Length A Width B SF1806 0.071 +/-0.008 0.185 +/-0.008 Width W Tape Center to End F Indexing to End E 0.472 +/-0.008 0.217 +/-0.002 0.069 +/-0.004 (1.80 +/-0.2) (4.70 +/-0.2) (12.0 +/-0.2) (5.5 +/-0.05) (1.75 +/-0.1) Holes Center Indexing Indexing to to Center to Center Indexing C C1 C2 0.157 +/-0.004 0.079 +/-0.004 0.157 +/-0.008 (4.0 +/-0.1) (2.0 +/-0.1) (4.0 +/-0.1) Hole Diameter Thickness Center D (Min.) Indexing D1 Overall Tape T (Max.) T1 (Max.) 0.059 0.059 +0.004/-0 0.098 0.024 (1.5) (1.5 +0.1/-0) (2.5) (0.6) SPECTRUM CONTROL INC. * 8031 Avonia Rd. * Fairview, PA 16415 * Phone: 814-474-2207 * Fax: 814-474-2208 * Web site: www.spectrumcontrol.com SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 53 *1566 PRINTER 03-62 12/4/06 9:06 AM Page 52 Surface Mount EMI Filters LC Type Chips High efficiency EMI surface mount filter Non-polar, surface mountable Ideally suited for high frequency signal lines Steep insertion loss (IL) characteristics Insertion Loss (Per Mil Std 220) 0 Effective over a wide range of frequencies Monolithic construction of dielectric and ferrite materials LC0805 Style Available in the 0805 and 1206 body sizes Typical Electrical Characteristics Cut-off Frequency Ranges . . . . . . . . 10 MHz to 220 MHz -10 E D Insertion Loss (dB) Surface Mount Filters & Inductors Features B -20 A Cut-off Frequency A-LC0805M103MANA-* B-LC0805M223MANA-* C-LC0805M473MANA-* D-LC0805M104MANA-* E-LC0805M224MANA-* -30 -40 Cut-off Frequency Tolerances . . . . . . 20% C -50 100K 1M 10M 100M Frequency (Hz) 1G 10G Rated Voltage . . . . . . . . . . . 25 Volt Rated Current . . . . . . . . . . . 100 milliamp IR . . . . . . . . . . . . . . . . . . . 10 Megohms min. -* Denotes packaging style, replace with T for tape and reel or B for bulk LC1206 Style Temperature Range . . . . . . . -25C to +85C Insertion Loss (Per Mil Std 220) 0 DC Resistance. . . . . . . . . . . 6 ohms max. Applications Cellular telephones and base stations Telecommunication equipment Industrial electronic interface or programmable controllers Computer and peripheral equipment Digital AV equipment such as TV, VCR and DVD Digital circuit equipment Insertion Loss (dB) -10 -20 -30 -40 -50 100K A B C D Cut-off Frequency A-LC1206M103MANA-* B-LC1206M223MANA-* C-LC1206M473MANA-* D-LC1206M104MANA-* 1M 10M 100M Frequency (Hz) 1G 10G -* Denotes packaging style, replace with T for tape and reel or B for bulk Package Quantities 54 Body Style/Size Tape and Reel LC0805 LC1206 4,000 units/reel 4,000 units/reel SPECTRUM CONTROL INC. * 8031 Avonia Rd. * Fairview, PA 16415 * Phone: 814-474-2207 * Fax: 814-474-2208 * Web site: www.spectrumcontrol.com SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 *1566 PRINTER 03-62 12/4/06 9:06 AM Page 53 LE LE LM T Surface Mount EMI Filters LC Type Chips L Mechanical Dimensions Dimensions in inches (mm) Body Length (L) Body Width (W) Body Thickness (T) End Terminal Length (LE) Middle Terminal Length (LM) LC0805 0.079 0.008 (2.0 0.2) 0.049 0.008 (1.25 0.2) 0.032 0.008 (0.8 0.2) 0.012 0.008 (0.3 0.2) 0.024 0.008 (0.6 0.2) LC1206 0.126 0.008 (3.2 0.2) 0.058 0.008 (1.60 0.2) 0.0394 0.008 (1.0 0.2) 0.016 0.012 (0.4 0.3) 0.043 0.012 (1.1 0.3) Body Style/Size Selector Guide Part Number LC0805M103MANA-* LC0805M223MANA-* LC0805M473MANA-* LC0805M104MANA-* LC0805M224MANA-* LC1206M103MANA-* LC1206M223MANA-* LC1206M473MANA-* LC1206M104MANA-* Body Size 0805 1206 Cut-off Frequency 10 MHz 22 MHz 47 MHz 100 MHz 220 MHz 10 MHz 22 MHz 47 MHz 100 MHz Cut-off Frequency Tolerance Rated Voltage Rated Current I.R. Temperature Range 20% 25 V 100 mA 10 M -25C ~ +85C 20% 25 V 100 mA 10 M -25C ~ +85C Surface Mount Filters & Inductors W Circuit Schematic -* Denotes packaging style, replace with T for tape and reel or B for bulk Ordering Information Example: LC1206M223MANAT This part number represents an LC EMI filter chip with a body size of 1206. The cut-off frequency is 22 MHz with a tolerance of 20%, voltage rating is 25 Volts DC. It has nickel barrier, solder plated termination and a current rating of 0.1 Amp (100 milliamps). The parts are taped and reeled. LC 1206 M223 M A N A T Style Size Cut-off Frequency Cut-off Tolerance Rated Voltage Termination Rated Current Packaging LC 0805 1206 M = 20% A = 25 VDC N = Ni Barrier, Solder Plated A = 0.1 A (100 mA) T = Tape and Reel B = Bulk M103 = 10 MHz M223 = 22 MHz M473 = 47 MHz M104 = 100 MHz M224 = 220 MHz SPECTRUM CONTROL INC. * 8031 Avonia Rd. * Fairview, PA 16415 * Phone: 814-474-2207 * Fax: 814-474-2208 * Web site: www.spectrumcontrol.com SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 55 *1566 PRINTER 03-62 12/4/06 9:06 AM Page 54 Surface Mount Low Pass Filters MSM, SSM, RSM & PSM Series MSM - Miniature Surface Mount Chip Capacitors The MSM series filters feature high temperature construction and have current ratings up to 10 Amps. The filter chips will hardly allow residual inductance and the self-resonant frequency extends to the microwave band. Applications include telecommunication equipment, computer and peripheral equipment and digital AV equipment, medical equipment, DC power supply lines. Surface Mount Filters & Inductors Miniature footprint help in dense circuit configuration Rated at 10 Amps Packaged in tape and reel or bulk form Operating temperature ranges of -25C to +85C and -55C to +125C Available lead free/RoHs Compliant SSM - Square Surface Mount Filters The SSM series filters feature high temperature construction and have current ratings up to 10 Amps. The filter chip series are non-polar and surface mountable with excellent performance characteristics and come in a Pi circuit configuration. Applications include telecommunication equipment, computer and peripheral equipment, digital AV equipment, power amplifiers, power supplies and high current bus lines. Square mechanical geometry enhances SMT soldering Rated to 10 Amps Packaged in tape and reel or bulk form Operating temperature range of -55C to +125C Available lead free/RoHs Compliant RSM - Round Surface Mount Filters The RSM series filters feature high temperature construction and have current ratings up to 10 Amps. The filter chip series are non-polar and surface mountable with excellent performance characteristics and come in a Pi circuit configuration. Applications include telecommunication equipment, computer and peripheral equipment, digital AV equipment, power amplifiers, power supplies and high current bus lines. Round mechanical geometry enhances SMT soldering Rated to 10 Amps Packaged in tape and reel or bulk form Operating temperature range of -55C to +125C Available lead free/RoHs Compliant PSM - Power Surface Mount Filters The PSM series filters feature high temperature construction and have current ratings up to 20 Amps. This filter series is non-polar and surface mountable with excellent performance characteristics and come in either a Feed-thru or Pi circuit configuration. Applications include telecommunication equipment, computer and peripheral equipment, digital AV equipment, power amplifiers, power supplies and high current bus lines. 56 Provides time and costs saving compared to thru-hole filters Rated to 20 Amps Packaged in tape and reel or bulk form Operating temperature range of -55C to +125C Available lead free/RoHs Compliant SPECTRUM CONTROL INC. * 8031 Avonia Rd. * Fairview, PA 16415 * Phone: 814-474-2207 * Fax: 814-474-2208 * Web site: www.spectrumcontrol.com SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 *1566 PRINTER 03-62 12/4/06 9:06 AM Page 55 Insertion Loss 60 Insertion Loss (dB) 50 Surface Mount Low Pass Filters MSM Series 271M 40 102Z 30 20 151M 10 Feed-thru Input 470M 0 1 Output .049 (1.250.2) .078 (2.00.2) MSM MSM Ordering Information MSM 4 T MSM (Miniature) Dimensions in inches (mm) 470M Temperature Characteristic R - +/-15% T - +22/-33% V - +22/-82% 10 Capacitance Value T Packaging Current Rating 10 Amps Tolerance 47 pF .049 (1.250.2) T - Tape and Reel 2,000 pcs/reel B - Bulk pack 1,000pcs/reel +50/- 20% Specifications Part Number Temperature Characteristics Capacitance MSM4T470M10 MSM4R151M10 MSM4R271M10 MSM4V102M10 T R R V 47pF 150pF 270pF 1000pF Capacitance Tolerance Through hole .023 (o 0.6) Current Rating +50/-20% MSM Recommended Board Pattern Surface Rated Rating Rating Temperature Range 50VDC -55/+125C -55/+125C -55/+125C -25/+85C 10A MSM Tape and Reel Packaging Bottom side o .058 (1.50.1-0) .078 (2.000.05) .157 .157 (4.00.1) (4.00.1) Full-face ground .070 (1.8) .023 (0.6) Max. .068 (1.750.1) .314 (8.00.2) .090 (2.30.2) .098 .047 (2.5) (1.2) 10000 .007 (0.20.1) .007 (0.20.1) Working Voltage . . . . . . . . . . 50 VDC Test Voltage . . . . . . . . . . . . 150 VDC Current Rating . . . . . . . . . . 10 Amps max. Insulation Resistance. . . . . . 1.0 M Terminations. . . . . . . . . . . . Ni-Barrier Soldering Conditions . . . . . . Max. 250C-5 sec. Circuit Configuration 4 - Feed-thru 1000 Frequency (MHz) Ground Style 100 10 Surface Mount Filters & Inductors MSM .137 (3.50.05) Chip .031 (0.8) .058 (1.5) .110 (2.8) Note: Exclusively for reflow soldering Copper foil pattern Resist .057 (1.450.2) o .045 (1.150.05) Center hole .117 (3.0) Max. Unit: mm Size difference: 0.1 Thickness of copper foil: 35m Dimensions in inches (mm) SPECTRUM CONTROL INC. * 8031 Avonia Rd. * Fairview, PA 16415 * Phone: 814-474-2207 * Fax: 814-474-2208 * Web site: www.spectrumcontrol.com SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 57 *1566 PRINTER 03-62 12/4/06 9:06 AM Page 56 Pi Insertion Loss Typical SMT Applications 100 90 SSM & RSM Series 70 SSM Insertion Loss (dB) Surface Mount Low Pass Filters 80 Pi Input * See note 4000 2500 1500 1000 820 470 130 100 68 60 50 40 30 pf pf pf pf pf pf pf pf pf 20 Output 10 0 0.01 Ground 0.1 1 10 Frequency (MHz) 100 1000 3000 Shielded or Partition Applications Working Voltage . . . . . . . . . 100 VDC Test Voltage . . . . . . . . . . . . 250 VDC Current . . . . . . . . . . . . . . . Max. 10 Amps Insulation Resistance. . . . . . . . . . . . . . Min. 104 M Terminations. . . . . . . . . . . . Silver Ni-Tin plated Soldering Conditions . . . . . . . . . . . . . Max. 250C -5 sec. Marking. . . . . . . . . . . . . . . None Packaging. . . . . . . . . . . . . . Bulk or Tape and Reel Note: Insertion loss shown for the following SSM values* only: 101Z 501P 202P *Additional IL charts available by request. RSM * See note 4000 2500 1500 1000 820 470 135 100 68 80 70 60 50 40 30 pf pf pf pf pf pf pf pf pf 20 10 0 0.01 0.1 1 10 Frequency (MHz) 100 1000 3000 * Capacitance values for insertion loss curves are displayed left to right in the order shown. SSM .026 .014 (0.65 0.35) Electrodes .026 .014 (0.65 0.35) Pi Input .083 .004 (2.1 0.1) Output Ground Working Voltage . . . . . . . . . 100 VDC Test Voltage . . . . . . . . . . . . 250 VDC Current . . . . . . . . . . . . . . . Max. 10 Amps Insulation Resistance. . . . . . . . . . . . . . Min. 104 M Terminations. . . . . . . . . . . . Silver Ni-Tin plated Soldering Conditions . . . . . . . . . . . . . Max. 250C -5 sec. Marking. . . . . . . . . . . . . . . None Packaging. . . . . . . . . . . . . . Bulk or Tape and Reel Note: Insertion loss shown for the following RSM values only: 152P 402Z 58 90 Insertion Loss (dB) Surface Mount Filters & Inductors 100 .02 (0.5) min. .113 (2.87) .315 (8.0) max. .02 (0.5) min. .02R max. (0.5) (4 plcs) RSM .315 (8.00) Max. .083.004 (2.1 1.0) .020 (.500) Min. .012/.040 (0.3/1.0) NI/SN OVER AG PLATED TUBE 0.232 (5.90) 0.26 .113 (2.58) .014 (.35) 0.020 (.500) Min. .012/.040 (0.3/1.0) Dimensions in inches (mm) SPECTRUM CONTROL INC. * 8031 Avonia Rd. * Fairview, PA 16415 * Phone: 814-474-2207 * Fax: 814-474-2208 * Web site: www.spectrumcontrol.com SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 *1566 PRINTER 03-62 12/4/06 9:06 AM Page 57 Surface Mount Low Pass Filters SSM & RSM Series SSM & RSM Ordering Information Example: SSM1-101Z-05T 1 Style Circuit Configuration 1 - Pi SSM (Square) RSM (Round) - 101Z Capacitance Also available through Spectrum Control's authorized distributors. Also available through Spectrum Control's authorized European distributors/agents. SSM1-152P-05-T1 Code Value Tolerance 101Z 100 pF +80/-20% 501P 500 pF +100/-0% 152P 1500 pF +100/-0% 202P 2000 pF +100/-0% 402E 4000 pF 25 402Z 4000 pF +80/-20% SSM/RSM Tape and Reel Packaging .098 (2.50) .013 (0.33) .059 (1.50) .157 (4.00) .079 (2.00) - .295 (7.50) 05 T Current Rating 05 - 5 Amps 10 - 10 Amps Packaging 1 Tape and Reel T - Tape and reel packaging B - Bulk packaging 1 - 1,000 pieces 6 - 6,000 pieces Note: Tape and reel packaging 1,000 pieces (7") and 6,000 pieces (13") SSM Recommended Board Pattern .043 (1.1) Surface Mount Filters & Inductors SSM .043 (1.1) .069 (1.75) .093 (2.36) Min. .315 (8.00) .630 (16.0) .157 (4.00) .059 (1.50) .102 (2.6) Dimensions in inches (mm) SPECTRUM CONTROL INC. * 8031 Avonia Rd. * Fairview, PA 16415 * Phone: 814-474-2207 * Fax: 814-474-2208 * Web site: www.spectrumcontrol.com SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 59 *1566 PRINTER 03-62 12/4/06 9:06 AM Page 58 Feed-thru Insertion Loss Typical SMT Applications 80 70 PSM Series 60 Input Pi Output Input Surface Mount Filters & Inductors Ground * See note 0.01 uF 4000 pf 2500 pf 1500 pf 1000 pf 820 pf 470 pf 130 pf 100 pf 68 pf 50 40 30 20 Output 10 0 0.01 Ground Voltage Rating DC . . . . . . . 200 VDC @ - 55C to +125C Voltage Rating AC . . . . . . . 125 VAC @ 60Hz DWV . . . . . . . . . . . . . . . . . 700 VDC Current Rating . . . . . . . . . . . . . . . . 20 Amps (Feed-thru) max. .................. 10 Amps (Pi) max. Insulation Resistance. . . . . . . . . . . . . . 1.0 G @ 25C Dissipation Factor. . . . . . . . . . . . . . . . . 4.0% maximum D.C.R. . . . . . . . . . . . . . . . . Max. .0005, typ. .0002 0.1 1 10 Frequency (MHz) 100 1000 3000 Shielded or Partition Applications 80 * See note 70 0.01 uF 4000 pf 2500 pf 1500 pf 1000 pf 820 pf 470 pf 130 pf 100 pf 68 pf 60 Insertion Loss (dB) PSM Feed-thru Insertion Loss (dB) Surface Mount Low Pass Filters 50 40 30 20 10 0 0.01 0.1 1 10 Frequency (MHz) 100 1000 3000 * Capacitance values for insertion loss curves are displayed left to right in the order shown. PSM Pi Insertion Loss .026 (0.66) .120 (3.00) Sq. (both ends) .026 (0.66) Typical SMT Applications .057 (1.46) .120 (3.00) .010 (0.25) 100 90 * See note 4000 2500 1500 1000 820 470 130 100 68 .025 (0.63) Ref. .070 (1.75) (4x both ends) Middle terminal Insertion Loss (dB) 80 .235 (6.00) 70 60 50 40 30 pf pf pf pf pf pf pf pf pf 20 .315 (8.00) Max. 10 Tolerances: .010 (.254) 0 0.01 Dimensions in inches (mm) 0.1 1 10 Frequency (MHz) 100 1000 3000 Shielded or Partition Applications 100 90 Insertion Loss (dB) 80 70 60 50 40 30 * See note 4000 2500 1500 1000 820 470 135 100 68 pf pf pf pf pf pf pf pf pf 20 10 0 0.01 60 0.1 1 10 Frequency (MHz) 100 1000 3000 SPECTRUM CONTROL INC. * 8031 Avonia Rd. * Fairview, PA 16415 * Phone: 814-474-2207 * Fax: 814-474-2208 * Web site: www.spectrumcontrol.com SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 *1566 PRINTER 03-62 12/4/06 9:06 AM Page 59 Surface Mount Low Pass Filters PSM Series PSM 4 Style Circuit Configuration 1 - Pi 4 - Feed-thru PSM (Power) - 402Z - Capacitance T 0 Current Rating 10 - 10 Amps (Pi) 20 - 20 Amps (Feed Thru) Packaging Tape and Reel T - Tape and reel packaging B - Bulk packaging 0 - 500 pieces 2 - 2,000 pieces Note: Tape and reel packaging 500 pieces (7") and 2,000 pieces (13") Code Value* 680M 68 pF 101M 100 pF 20% Control's authorized distributors. 131P 130 pF +100/-0% Also available through Spectrum 471P 470 pF +100/-0% Control's authorized European distributors/agents. 821M 820 pF 20% 102M 1000 pF 20% 152M 1500 pF 20% 252P 2500 pF +100/-0% 402Z 4000 pF +80/20% * Other capacitance values available as special order. .01 F +80/-20% ** Available in Feed-thru circuit only. Also available through Spectrum PSM1-402Z-10T0 PSM4-103Z-20T0 PSM4-152M-20T0 PSM4-402Z-20T0 103Z** Tolerance 20 20% Technical Notes PSM Tape and Reel Packaging Soldering recommendations supplied upon request Reflow temperature limit is 250C Unit weight is approximately 0.4 grams Tape and reel packaging available for automated assembly .150 (3.81) .013 (0.33) .059 (1.50) .157 (4.00) .295 (7.50) Surface Mount Filters & Inductors PSM Ordering Information Example: PSM4-402Z-20T0 .069 (1.75) .079 (2.00) .320 (8.13) .630 (16.0) .315 (8.00) .133 (3.38) .059 (1.50) Dimensions in inches (mm) PSM Recommended Board Pattern .285 (7.25) Solder paste pattern Recommended pad, must be able to support continuous signal current X = 0.350" minimum for 1 oz. copper (0.036 mm thickness) X = 0.200" minimum for 2 oz. copper (0.071 mm thickness) For low current (10 Amp or less) X = 0.130" minimum for 1 oz. copper (0.036 mm thickness for 10 Amp and 0.5 oz. copper - 0.018 mm thickness for 5 Amp or less) Dimensions in inches (mm) X 0.10 (2.54) .070 (1.75) .050 (1.27) 120 .065 (1.65) .100 (2.54) .040 (1.00) min. .125 (3.20) SPECTRUM CONTROL INC. * 8031 Avonia Rd. * Fairview, PA 16415 * Phone: 814-474-2207 * Fax: 814-474-2208 * Web site: www.spectrumcontrol.com SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 61 *1566 PRINTER 03-62 12/4/06 9:06 AM Page 60 Thru-hole Filters High Frequency PCB Filters The economical High Frequency PCB Filter offers electrical characteristics which allow many devices to meet most government and industry specifications for EMI control, while providing good electrostatic discharge protection. Surface Mount Filters & Inductors A lossy ferrite filter with a center ground lead is terminated within the filter's thermoset epoxy body. The High Frequency PCB Filter offers savings three ways. First is the low cost of the filter assembly. Second is the economy of installation. Three silver plated leads are inserted into holes in a printed circuit board which has a ground path circuit, for conventional flows-soldering with other components. No special mounting plate or brackets are needed and when the holes are placed as recommended in a .062 (1.57mm) thick board, no lead trimming is required. Elimination of hand soldering provides opportunities for improved quality in addition to applied-cost benefits. A third savings results from placing a filter at the source of an EMI problem, potentially eliminating the need for additional filtering at other points in the circuit. Features Provides EMI filtering to protect low power digital circuits - helps equipment meet FCC and VDE specifications Mounts directly to printed circuit board with no bracket or plate for lower applied costs - can be flow soldered with other components Encapsulated for environmental protection Mounts on PCB to begin filtering at the source of the problem Built-in standoffs permit cleaning or coating under the filter Circuit Schematic Typical Electrical Characteristics Current . . . . . . . . . . . . . . . Max. 10A DC; 0.3A RF Operating Voltage . . . . . . . . Max. 50 VDC, -25C +85C Capacitance . . . . . . . . . . . . 800 pF min. Dissipation Factor . . . . . . . . 0.1 Max. Dielectric Withstanding Voltage . . . . . 125 VDC for 5 seconds Insulation Resistance. . . . . . Min. 100 MegOhms at 100 VDC . . . . . . . . . . . . . . . . . . . . . for 2 minutes and 25C Direct Current Resistance. . . . . . . . . . . . . . 0.002 ohms Max. Minimum No-Load Insertion Loss . . . . . . . . . . . Per MIL-STD-220 at 25C; PCB mounted, 50 ohm strip line 3dB @ 8 MHz 10dB @ 25 MHz 15dB @ 50 MHZ 20dB @ 100 MHz-1GHz Preformed to Recommended Mounting Configuration Part Number 842448-2 Recommended Mounting Configuration .600.030 (15.240.76) Pi Input .015 (0.38) Ref. .062 (1.57) Ref. .300.015 (7.620.38) Output Ground Lead .062 (1.57) Ref. Dimensions in inches (mm) Ground Recommended PCB Hole Layout Standard Configuration Part Number 842448-1 1.040 (26.42) .600.010 (15.240.25) .300.010 (7.620.25) .300.005 (7.620.13) + .055.002 (1.40.05) Dia. .200.010 (5.080.25) + + .040.002 (1.020.05) Dia. .055.002 (1.40.005) Dia. Dimensions in inches (mm) 62 .032 (0.81) Dia. Ground Lead .520 (13.21) Ref. .020 .040 .2400.51 (1.02) (6.10 ) Dia. .125.025 (3.180.64) Dimensions in inches (mm) SPECTRUM CONTROL INC. * 8031 Avonia Rd. * Fairview, PA 16415 * Phone: 814-474-2207 * Fax: 814-474-2208 * Web site: www.spectrumcontrol.com SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 *1566 PRINTER 03-62 12/4/06 9:06 AM Page 61 Low Pass EMI Filters CERTIFIED SPECTRUM CONTROL INC. * 8031 Avonia Rd. * Fairview, PA 16415 * Phone: 814-474-2207 * Fax: 814-474-2208 * Web site: www.spectrumcontrol.com SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 63 *1566 PRINTER 03-62 12/4/06 9:06 AM Page 62 CERTIFIED Other Key Pages Low Pass Filter Selection Guide Pages Filter Installation ............................16 Performance Testing...................17-18 Value Added Filter Assemblies .....100 Military Cross Reference .......237-239 MLFT Filters Performance through the GHz range Standard and custom mechanical packages available Transient voltage & surge protection available in some packages Available in multiple line packages Motor Line Feed-Thru Technology (MLFT) is an innovative new line of filters designed to be a flexible, low cost solution to EMI (RF) noise issues. This product can be used in a variety of applications requiring high capacitance at lower voltages with the option of custom designed, easy to retro fit mechanical packaging. MLFT Filters . . . . . . . . . . . . 65 Solder-in filters are ideal for use in critical areas where space does not allow use of mounting tools or hardware. The solder-in feature also allows installation in unison with other board mounted components. Primarily used in filtering signal/data lines and AC power lines. Solder-in Filters C . . . . . . . . . . . . . . . . . . 66-67 Pi . . . . . . . . . . . . . . . . . 68-69 Miniature Solder-in Filters . . . . 70 Solder-in Filters Small size to allow effective use of space Voltage ratings to 750 VDC Multiple circuit configurations: C & Pi standard L circuit also available High temperature construction to prevent reflow during installation MIL-F-15733 QPL and MIL-C-11015 (CK99) filters available Resin Sealed Bolt-in Filters Wide range of sizes: 4-40 thread through 5/16-24 thread Voltage ratings to 500 VDC/220 VAC MIL-F-15733 QPL filters available Multiple circuit configurations: C, L and Pi Metric Threaded filters available Spec-Spin and Spec-Mini Press filters These filters are easily mounted in a tapped hole or thru-hole with supplied nut and lock-washer. The rugged case with resin seals at both ends provides excellent environmental protection. Primarily used in filtering signal/data lines and DC power lines. The Spec-Mini Press and Spec Spin Filters are ideal for use where solder is undesirable. Each offers easy filter substitution and are for use in microwave applications and other high frequency applications. Spec Mini-Press 9900 Series . . . 71 Spec Spin Filters . . . . . . . . . . 72 Resin Sealed Bolt-in Filters 4-40. . . . . . . . . . . . . . . . 73-75 6-32 . . . . . . . . . . . . . . . . . . 76 6-40 . . . . . . . . . . . . . . . . . . 76 8-32. . . . . . . . . . . . . . . . 77-78 10-32 . . . . . . . . . . . . . . . . . 79 12-28/32 . . . . . . . . . . . . 80-82 5/16-24, 5/16-32 . . . . . . . . 83 High Current/High Voltage Resin Sealed Filters Current ratings up to 100 Amps Continuous voltage ratings up to 2500 VDC/240 VAC U.L. 1459 recognized and CSA C22.2 certified versions available Rugged bolt-in style for easy installation High current filters are ideal for use in high current 5 volt logic buss, but also can be used for +/-48 VDC telephone rack buss, high current switch mode power supplies and DC charging systems. High voltage filters find use in high voltage power supplies and applications requiring U.L. Hi-Pot. Hermetically Sealed Case Filters Popular .375/.410" and .690" case diameters Voltage ratings from 50 VDC to 400 VDC/ 240 VAC Filter configurations available: C, L, Pi, T and double T MIL-F-15733 and MIL-F-28861 QPL filters available This series of filters features hermetic glass seals and high EMI filtering performance. They are excellent for critical applications that demand high reliability in the toughest environmental conditions and provide broadband high performance EMI filtering from 10 KHz to over 10 GHz. High Voltage Filters 25 Amp . . . . . . . . . . . . . 84-85 UL/CSA Filters 50 Amp . . . . . . . . . . . . . 84-85 100 Amp . . . . . . . . . . . . 84-85 Case Dia. .375 .410 .690 64 Filter C. . . . . . . . . . . . . . . . 87 L . . . . . . . . . . . . . 88-92 Pi. . . . . . . . . . . . . 93-94 Transient Suppression Pi . . . . . . . . . . . . . . . 94 T . . . . . . . . . . . . . . . . 95 TT. . . . . . . . . . . . . . . 96 C. . . . . . . . . . . . . . . . 97 L . . . . . . . . . . . . . 98-99 Pi . . . . . . . . . . . . . . 100 T . . . . . . . . . . . . . . . 101 SPECTRUM CONTROL INC. * 8031 Avonia Rd. * Fairview, PA 16415 * Phone: 814-474-2207 * Fax: 814-474-2208 * Web site: www.spectrumcontrol.com SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 *1566 PRINTER 063-120 v2 12/4/06 9:13 AM Page 1 MLFT Filters Motor Line Feed-Thru Technology (MLFT) is an innovative new line of filters designed to be a flexible, low cost solution to EMI (RF) noise issues. By utilizing our vast experience in designing, testing products at our on-site lab, and manufacturing integrated filtering products; we can quickly and economically design an easy to use solution to any EMC issue. C Filter L-B Filter With easy installation in mind, our feed-thru packages are designed to be placed at the product's interface to the outside world at the low impedance ground -- where filtering is optimized. Thus eliminating the need for complex PC boards that are required when trying to incorporate surface mount components and boards into a system. Low Pass Filters The product was originally developed to solve the filtering needs of DC motors, allowing them to pass the stringent standards that govern these motors in various industries they are used. Although this product was developed with the DC motors in mind, it can be used in almost any application that requires high capacitiance at lower voltages with the option of custom designed, easy to fit mechanical packaging. Features I Performance through the GHz range I Standard and custom mechanical packages available I Transient voltage & surge protection available in some packages I Available in multiple line packages SPECTRUM CONTROL INC. * 8031 Avonia Rd. * Fairview, PA 16415 * Phone: 814-474-2207 * Fax: 814-474-2208 * Web site: www.spectrumcontrol.com SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 65 *1566 PRINTER 063-120 v2 12/4/06 9:13 AM Page 2 Solder-in Filters Solder-in filters are ideal for use in critical areas where space does not allow use of mounting tools or hardware. The solder-in feature also allows installation in unison with other board mounted components. Primarily used in filtering signal/data lines and DC power lines. Low Pass Filters Features I Small size to allow effective use of space I Voltage ratings to 750 VDC I Multiple circuit configurations: C, L & Pi available I High temperature construction to prevent reflow during installation I MIL-F-15733 QPL versions available o .062 .005 (o 1.59 .13) .359 .015 (9.11 .38) o B .015 (o B .38) o A Max. (o A Max.) o .040 .005 (o 1.02 .13) o .281 .015 (o 7.14 .38) .390 .030 (9.91 .76) .203 .015 (5.15 .38) .093 .015 (2.38 .38) o .190 Max. (o 4.83) .170 .030 (4.34 .76) .093 .015 (2.38 .38) .140 Max. (3.57 Max.) o .044 .005 (o 1.12 .13) Figure 1 Figure 2 o .281 .015 (o 7.14 .38) .093 .015 (2.38 .38) .093 .015 (2.38 .38) .05 .01 (1.27 .25) .093 .015 (2.38 .38) o .190 Max. (o 4.83) .343 .030 (8.73 .76) Figure 3 o .281 .015 (o 7.14 .38) o .190 Max. (o 4.83) .093 .015 (2.38 .38) .328 .030 (8.33 .76) o .062 .005 (o 1.59 .13) Figure 4 .093 .015 (2.38 .38) .05 .01 (1.27 .25) .093 .015 (2.38 .38) .343 .030 (8.73 .76) Figure 5 Dimensions in inches (mm) 66 SPECTRUM CONTROL INC. * 8031 Avonia Rd. * Fairview, PA 16415 * Phone: 814-474-2207 * Fax: 814-474-2208 * Web site: www.spectrumcontrol.com SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 *1566 PRINTER 063-120 v2 12/4/06 9:13 AM Page 3 Solder-in Filters Solder-in C Circuit 54-786-003 Cap* 0.30 F 1 MHz 32 Minimum Insertion Loss (dB) 1 10 30 100 300 MHz MHz MHz MHz GHz 60 66 70 47 54 10 GHz 70 54-785-002 1 100 10 0.05 F (min) 16 33 41 45 48 50 50 54794002X5R101M 4 -- -- -- -- 250 25 100 pF 20% -- -- -- -- 10 20 20 54803004X5R101M 3 -- -- -- -- 250 25 100 pF 20% -- -- -- -- 10 20 20 54802002X5R101M 2 -- -- -- -- 250 25 100 pF 20% -- -- -- -- 10 20 20 54794002X5R471M 4 -- -- -- -- 250 25 470 pF 20% -- -- -- 12 22 25 25 54803004X5R471M 3 -- -- -- -- 250 25 470 pF 20% -- -- -- 12 22 25 25 54802002X5R471M 2 -- -- -- -- 250 25 470 pF 20% -- -- -- 12 22 25 25 54802002X5V102P 2 -- -- -- -- 250 25 1000 pF -- -- -- 15 25 35 40 54803004X5V102P 3 -- -- -- -- 250 25 1000 pF -- -- -- 15 25 35 40 54794002X5V102P 4 -- -- -- -- 250 25 1000 pF -- -- -- 15 25 35 40 54-786-077 5 -- -- -- -- 750 10 1000pF -- 4 -- 20 25 35 40 0.125 (3.18) 0.184 (4.67) Also available through Spectrum Control's authorized distributors. * Tolerances are +100/-0% unless noted. SPECTRUM CONTROL INC. * 8031 Avonia Rd. * Fairview, PA 16415 * Phone: 814-474-2207 * Fax: 814-474-2208 * Web site: www.spectrumcontrol.com SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 Low Pass Filters Part Number See Rated Voltage B A I Pg. 64 125C Amp for Fig. In (mm) In (mm) DC 0.156 (3.96) 0.203 (5.16) 1 50 10 67 *1566 PRINTER 063-120 v2 12/4/06 9:13 AM Page 4 Solder-in Filters Solder-in Pi Circuit o .140 .010 (3.56 .25) .315 .015 (8.00 .38) .103 .015 (2.6 .38) o D .005 (D 0.13) A .031 (A .79) o .110 .005 (o 2.79 .12) B .031 (B .79) B .031 (B .79) o .195 .005 (o 4.95 .13) o D .005 (D 0.13) o .140 .005 (o 3.56 .12) Low Pass Filters Figure 1 o .140 .005 (o 3.56 .12) .093 .02 (2.36 .51) .156 .02 (3.96 .51) Figure 2 .010 (.25) A .031 (A .79) B .031 (B .79) o .195 .005 (o 4.95 .13) A .031 (A .79) .115 (2.92) 1.080 .031 (27.43 .79) Tinned Metal Ground Straps .400 (10.16) o 0.32 .005 (o 0.81 0.13) .219 .02 (5.56 .51) .156 .02 (3.96 .51) o .032 .005 (o 0.81 0.13) o .124 (3.15) .250 (6.35) .415 (10.54) Figure 3 Figure 4 Red Enamel Solder Coating o .156 .015 (o 3.97 .38) o .085 max. (o 2.2) o .040 .005 (o 1.02 .13) .265 .030 (6.75 .76) .020 Ref. (.51) .106 .030 (2.69 .76) .343 .030 (8.73 .76) .156 .015 (3.97 .38) Figure 5 B .010 (B .25) o .195 (o 4.95) o .145 (o 3.68) .468 .030 (11.91 .76) o .033 min. (.84) A .010 (A .25) Figure 6 .406 .031 (10.31 .79) o .234 max. (o 5.94) .218 .031 (5.54 .79) Turret Lead .687 .031 (17.45 .79) o .312 .031 (7.92 .79) Figure 7 .500 .031 (12.70 .79) Figure 8 Dimensions in inches (mm) 68 SPECTRUM CONTROL INC. * 8031 Avonia Rd. * Fairview, PA 16415 * Phone: 814-474-2207 * Fax: 814-474-2208 * Web site: www.spectrumcontrol.com SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 *1566 PRINTER 063-120 v2 12/4/06 9:13 AM Page 5 Solder-in Filters Solder-in Pi Circuit Minimum Insertion Loss (dB) 10 1 1 10 30 100 300 MHz MHz MHz MHz MHz GHz GHz -- 5 12 50 50 65 65 2 0.268 (6.81) 0.780 (19.81) 0.032 (0.81) 70 -- 10 0.012 F 5 22 50 70 70 65 65 1234-000* -- 2 0.257 (6.53) 0.780 (19.81) 0.032 (0.81) 70 -- 10 0.012 F 5 25 50 70 70 70 70 51-749-304 -- 4 -- -- -- -- -- -- 70 -- 10 0.012 F 5 25 50 70 70 65 65 1234-001 -- 4 -- -- -- -- -- -- 70 -- 10 0.012 F 5 25 50 70 70 65 65 51-750-309* /62-0004 51-750-301* -- 2 0.250 (6.35) 0.780 (19.81) 0.032 (0.81) 70 -- 10 0.012 F 5 25 50 70 70 70 70 1233-000* -- 3 0.312 (7.92) 0.780 (19.81) 0.032 (0.81) 70 -- 10 0.022 F 7 35 60 70 70 70 70 51-750-302* -- 3 0.312 (7.92) 0.780 (19.81) 0.032 (0.81) 70 -- 10 0.022 F 7 25 60 70 70 70 70 51-750-313 /51-0002 3 0.312 (7.92) 0.780 (19.81) 0.032 (0.81) 70 -- 10 0.022 F 7 25 60 70 70 70 70 -- 5 200 -- 10 1300 pF -- 5 15 30 45 55 55 /62-0002 1 1.140 (28.96) 1.277 (32.44) 0.032 (0.81) 200 -- 10 1500 pF -- 5 12 45 50 70 70 -- 1 1.109 (28.17) 1.206 (30.63) 0.032 (0.81) 200 -- 10 1500 pF -- 5 15 40 50 70 70 -- 3 0.312 (7.92) 0.406 (10.31) 0.032 (0.81) 200 -- 10 1500 pF -- 8 17 45 65 70 70 -- 3 0.312 (7.92) 0.406 (10.31) 0.032 (0.81) 200 -- 10 1500 pF -- 5 15 45 50 70 70 3 0.312 (7.92) 0.406 (10.31) 0.032 (0.81) 200 140 10 1500 pF -- 3 15 45 50 70 70 51-723-303 51-713-010 1251-001 51-703-001* 1203-050 51-703-012* /62-0001 -- -- -- -- -- -- 51-713-002 -- 1 1.103 (28.01) 1.212 (30.78) 0.032 (0.81) 200 -- 10 1500 pF -- 5 12 40 70 70 70 1214-029 -- 2 0.288 (7.31) 0.780 (19.81) 0.032 (0.81) 200 -- 10 1750 pF -- 5 15 50 60 60 70 1214-007 -- 6 0.093 (2.36) 0.157 (3.99) 200 -- 10 1750 pF -- 5 15 35 50 60 60 -- 2 0.288 (7.31) 0.780 (19.81) 0.032 (0.81) 200 -- 10 1750 pF -- 8 17 50 65 70 70 -- 51-707-002* 1214-001* -- -- 2 0.288 (7.31) 0.780 (19.81) 0.032 (0.81) 200 -- 10 1750 pF -- 5 15 50 50 60 60 51-707-006* /33-0001 2 0.288 (7.31) 0.780 (19.81) 0.032 (0.81) 200 90 10 1750 pF -- 5 15 50 50 60 60 51-707-007 /33-0002 2 0.288 (7.31) 0.780 (19.81) 0.032 (0.81) 200 90 10 1750 pF -- 5 15 50 50 60 60 51-707-026 /66-0001 6 0.288 (7.31) 0.157 (3.99) 200 -- 10 1750 pF -- 5 15 35 50 50 50 -- 2 1.123 (28.52) 1.347 (34.21) 0.040 (1.02) 200 -- 10 3000 pF -- 7 25 50 65 65 65 3 0.312 (7.92) 0.406 (10.31) 0.032 (0.81) 200 200 10 5500 pF -- 15 30 55 65 70 70 51-750-322 51-703-007* /51-0001 -- -- 1223-012 -- 1 0.240 (6.10) 0.360 (9.14) 0.040 (1.02) 200 -- 15 3000 pF -- 7 25 50 65 65 65 1204-050 -- 7 0.210 (5.34) -- -- -- -- 500 -- 25 3000 pF -- 8 25 50 65 70 70 /40-0001 7 0.234 (5.94) -- -- -- -- 500 350 25 3000 pF -- 7 25 55 65 70 70 51-704-002 * Low Pass Filters Rated Voltage M15733 See 125C D A B I Min MIL Pg. 66 Part Number Number for Fig. In Cap DC In In AC Amp (mm) (mm) (mm) 0.312 (7.92) 0.469 (11.91) 0.032 (0.81) 70 3 -- 10 1500 pF 51-703-013* /62-0003 Denotes parts with turret on one end per Figure 8. Also available through Spectrum Control's authorized distributors. Also available through Spectrum Control's authorized European distributors/agents. SPECTRUM CONTROL INC. * 8031 Avonia Rd. * Fairview, PA 16415 * Phone: 814-474-2207 * Fax: 814-474-2208 * Web site: www.spectrumcontrol.com SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 69 *1566 PRINTER 063-120 v2 12/4/06 9:13 AM Page 6 Miniature Solder-in Filters These filters are ideal for microwave applications such as attenuators and oscillators, and perform well in high impedance circuits where large capacitance values are not practical. Low Pass Filters Features .625 Ref. (15.88) I Miniature size to allow effective use of space I Standard capacitance values from 5pF to .030F I Voltage ratings to 200 VDC/115 VAC 0-400 Hz I Hermetically sealed on one end allows for thru-hole sealing between compartments I High temperature construction meets MIL-F-28861 solderability and resistance to soldering heat requirements I Available in MIL-C-11015 versions -- see page 239 I Gold plating compatible with gold bonding techniques .25.03 (6.350.76) o .156 .005 (3.96 0.13) .020.005 (0.510.13) o .128.005 (3.250.13) o .030 (o 0.76) .110.005 (2.790.13) Glass Seal (STD) Figure 1 Marking Color dot standard as follows: G 101 Green - 100pF G 272 Red - 2700pF G 501 Brown - 500pF G 502 Blue - 5000pF G 102 Purple - 1000pF G 153 Pink G 122 White - 1200pF G 000 None - 10pF max Glass Seal (Reverse) - 15000pF Figure 1 (Reverse)* Dimensions in inches (mm) Miniature Solder-in C Circuit Part Number* SCI-9900-153 SCI-9900-303 SCI-9910-272 SCI-9910-502 SCI-9900-000 SCI-9920-101 SCI-9920-501 SCI-9920-122 Figure 1 1 1 1 1 1 1 1 Rated Voltage 125C AC DC 50 50 100 100 200 200 115 200 115 200 115 Minimum Insertion Loss (dB) I Amp 5 5 5 5 5 5 5 5 Min Cap 0.015 F 0.030 F 2700 pF 5000 pF 4 pF max. 100 pF 500 pF 1200 pF 1 MHz 7 10 -- -- -- -- -- -- 10 MHz 25 30 10 15 -- -- -- 5 30 MHz 30 35 18 20 -- -- -- 10 100 MHz 40 45 25 30 -- 3 15 20 300 MHz 40 50 33 35 -- 10 22 28 1 GHz 60 55 40 45 10 20 35 35 10 GHz 60 55 50 55 10 28 40 45 * For reverse glass seal add an "R" to the end of the part number (SCI-9900-153R). Also available through Spectrum Control's authorized distributors. 70 SPECTRUM CONTROL INC. * 8031 Avonia Rd. * Fairview, PA 16415 * Phone: 814-474-2207 * Fax: 814-474-2208 * Web site: www.spectrumcontrol.com SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 *1566 PRINTER 063-120 v2 12/4/06 9:13 AM Page 7 Spec Mini-Press 9900 Series This new knurled filter is designed to be pressed into place and create a reliable mechanical bond. This feature makes it an excellent selection for applications where soldering is undesirable. Suitable plating is available that allows gold bonding to the terminals. These filters are ideal for microwave and RF applications such as attenuators, synthesizers, and oscillators. They perform well in high impedance circuits where large capacitance values are not practical. Installation I .136" to .137" (3.45-3.48mm) diameter hole I Hole must be free of all insulating materials. I Installation tool must have a hole of sufficient depth and diameter to accept the terminal of the filter. I Installation force must be applied gradually and smoothly until the flange of the filter is seated against the receiving part (request installation instructions). .156 .005 dia. (3.96 .127 dia.) .625 (15.88) ref. .025 (0.635) .250 .010 .030 .002 (6.35 (.254 .762) .051) .030 .002 dia. .020 (.762 .005 .051 (.508 dia.) Epoxy .127) Seal .143 .002 (3.63 .051) Glass Seal End Straight Knurl, 160 D.P. .110 .005 (2.79 .127) Built and tested in accordance with MIL-F-15733. .128 .005 dia. (3.25 .127 dia.) Figure 1 Dimensions in inches (mm) Mechanical Specifications Low Pass Filters Applications Installation . . . . . . . . . . . . . Press-in Plating . . . . . . . . . . . . . . . . Gold Seal . . . . . . . . . . . . . . . . . . Glass sealed on one end, . . . . . . . . . . . . . . . . . . . . . resin sealed on the other end Termination Options . . . . . . Plating suitable for gold . . . . . . . . . . . . . . . . . . . . . bonding Operating Temperature . . . . -55C to +125C Circuit Schematic Input Insertion Tool Output Part Number: SCI-9925-200 Ground Rated Voltage 125C Part Number SCI-9925-153 SCI-9925-303 SCI-9925-502 SCI-9925-000 SCI-9925-101 SCI-9925-501 SCI-9925-122 Figure 1 1 1 1 1 1 1 DC 50 50 100 200 200 200 200 Minimum Insertion Loss (dB) I Amp 5 5 5 5 5 5 5 Cap 0.015 F +100%/-0% 0.030 F +100%/-0% 5000 pF +100%/-0% 10 pF max. 100 pF +100%/-0% 500 pF +100%/-0% 1200 pF +100%/-0% 1 MHz 7 10 -- -- -- -- -- 10 MHz 25 30 15 -- -- -- 5 30 MHz 30 35 20 -- -- -- 10 100 MHz 40 45 30 -- 3 15 20 300 MHz 40 50 35 -- 10 22 28 1 GHz 60 55 45 10 20 35 35 10 GHz 60 55 55 10 28 40 45 Also available through Spectrum Control's authorized distributors. SPECTRUM CONTROL INC. * 8031 Avonia Rd. * Fairview, PA 16415 * Phone: 814-474-2207 * Fax: 814-474-2208 * Web site: www.spectrumcontrol.com SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 71 *1566 PRINTER 063-120 v2 12/4/06 9:13 AM Page 8 Spec Spin Filters Spectrum Control Inc. introduces the new space saving #2-56 threaded miniature EMI spanner filter. This new threaded filter is designed without a hex and does not require soldering for installation. These features make it an excellent selection for applications that require many lines to be filtered in close proximity. The easy swap out also allows for flexibility in filter replacement and capacitance substitution. Easy filter substitution also allows for flexibility in filter placement. Custom design queries are always welcome. .020 (0.51) o.105 .005 (2.67) .020 (0.51) .290 (7.36) Low Pass Filters Applications .081 (2.06) #2-56 Unc-2A .240 (6.11) .024 (0.61) Built and tested in accordance with MIL-F-15733. Dimensions in inches (mm) Electrical Specifications Mechanical Specifications Operating Temperature . . . . -55C to +125C Center Spacing . . . . . . . . . . .0.110" Voltage Rating . . . . . . . . . . 50 VDC Lead Finish . . . . . . . . . . . . . Gold Current Rating . . . . . . . . . . 5 A Bushing Finish . . . . . . . . . . Gold Effective Filtering From . . . . 1 MHz to 10 GHz Tightening Torque . . . . . . . . 14 oz-in ( 2) (0.11Nm) Capacitance . . . . . . . . . . . . to 10,000 pF Insertion Tool Dielectric Withstanding Voltage . . . . . . . . . . . . . . . . . 125 VDC Part Number* 54-874-010 54-874-011 54-874-012 54-874-013 54-874-014 54-874-015 54-874-016 54-874-017 54-874-018 72 .140 (3.57) 1-1/2 Imperfect Threads Spectrum Control's spanner filter offers superior insertion loss over a broad frequency range when compared to surface mount components. The filter is available in capacitance values up to 10,000 pF, and is featured in a microcircuit package used in microwave applications such as frequency synthesizers, power amplifiers, MMW radio, and is ideal for commercial and hi-reliability applications. Cap (pF) 10 39 100 390 1,000 2,000 3,300 4,700 10,000 Max. Tolerance +0%/-20% Part Number: 54-874-020 Circuit Current Voltage DWV I.R. Temperature Range C 5A 50 VDC 125 VDC 1,000 M -55C to +125C +50%/-20% +100%/-0% +80%/-20% SPECTRUM CONTROL INC. * 8031 Avonia Rd. * Fairview, PA 16415 * Phone: 814-474-2207 * Fax: 814-474-2208 * Web site: www.spectrumcontrol.com SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 *1566 PRINTER 063-120 v2 12/4/06 9:13 AM Page 9 Resin Sealed Bolt-in Filters These filters are easily mounted in a tapped hole or thru-hole with supplied nut and lock-washer. The rugged case with resin seals at both ends provides excellent environmental protection. Primarily used in filtering signal/data lines and DC power lines. I Wide range of sizes: 4-40 thread through 5/16-24 thread I Voltage ratings to 500 VDC/220 VAC (400 Hz) I MIL-F-15733 QPL filters available I Multiple circuit configurations: C, L and Pi I Metric threaded filters available, consult factory 4-40 C Circuit .510 .031 (13.0 .79) .310 .031 (7.87 .79) .368 .031 (9.347 .79) .156 Hex. (3.96) .120 (3.05) o .025 .005 (.64 .13) .220 (5.59) .156 Hex. (3.96) .120 (3.05) .050 (1.27) o .032 .005 (.810 .13) .220 (5.59) #4-40 Unc-2A Thd. #4-40 Unc-2A Thd. Figure 1 .360 .031 (9.144 .79) .275 .031 (6.99 .79) Low Pass Filters Features Figure 2 .240 .031 (6.10 .79) .156 Hex. (3.96) .120 (3.05) .315 .031 (8.00 0.79) .140 (3.56) .225 .031 (5.72 0.79) .075 (1.91) .125 Hex. (3.18) o A .005 ( .13) .220 (5.59) #4-40 Unc-2A Thd. Figure 3 o .032 (o 0.81) #4-40 Unc-2A Thd. Figure 4 Dimensions in inches (mm) SPECTRUM CONTROL INC. * 8031 Avonia Rd. * Fairview, PA 16415 * Phone: 814-474-2207 * Fax: 814-474-2208 * Web site: www.spectrumcontrol.com SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 73 *1566 PRINTER 063-120 v2 12/4/06 9:13 AM Page 10 Resin Sealed Bolt-in Filters 4-40 C Circuit Minimum Insertion Loss (dB) 10 1 3 1 10 30 100 300 (mm) MHz MHz MHz MHz MHz MHz GHz GHz -- -- -- -- 10 -- 10 (0.81) -- SCI-9110-100 9900-381-6004 2 50 -- 10 5000 pF -- -- -- -- 15 22 30 35 45 55 9900-381-6026 2 50 -- 10 0.031 F -- -- 12 20 25 35 40 45 55 60 9900-381-6006 2 50 -- 10 0.045 F -- -- 14 22 30 40 45 50 55 60 54-790-023 1 100 -- 10 0.050 F -- -- 15 24 34 41 45 50 60 60 54790001X5F101M Part Number Low Pass Filters Rated Voltage 125C DC AC 50 -- See Pg. 71 for Fig. 3 I Amp 10 A Min Cap 10 pF In 0.032 1 100 -- 10 100 pF 20% -- -- -- -- -- -- -- 10 20 25 54-790-019 1 100 -- 10 2700 pF -- -- -- -- 9 18 27 33 35 35 9900-381-6013 2 100 -- 10 2700 pF -- -- -- -- 10 18 25 33 40 50 54-790-020 1 100 -- 10 5600 pF -- -- -- -- 15 24 33 37 40 40 SCI-9112-273 3 100 -- 3 0.027 F 0.016 (0.41)* 10 20 30 37 45 45 55 60 SCI-9110-273 3 100 -- 10 0.027 F 0.020 (0.51) 10 20 30 37 45 45 55 60 54-790-022 1 100 -- 10 0.027 F -- -- 10 20 30 37 45 50 55 60 SCI-9112-503 3 100 -- 3 0.05 F 0.016 (0.41)* 15 24 35 41 45 50 60 60 SCI-9110-503 3 100 -- 10 0.05 F 0.020 (0.51) 15 24 35 41 45 50 60 60 54-862-001 4 200 -- 10 10 pF -- -- -- -- -- -- -- -- 10 10 54-862-002 4 200 -- 10 100 pF -- -- -- -- -- -- 3 10 20 28 54-862-003 4 200 -- 10 1000 pF -- -- -- -- -- -- 15 25 35 40 9900-381-6020 2 200 -- 10 100 pF -- -- -- -- -- -- 3 10 20 28 SCI-9122-101 3 200 115 3 100 pF 0.016 (0.41)* -- -- -- -- -- 10 20 20 SCI-9120-101 3 200 115 10 100 pF 0.020 (0.51) -- -- -- -- -- 10 20 20 9900-381-6021 2 200 -- 10 500 pF -- -- -- -- -- -- 15 20 35 40 SCI-9122-102 3 200 115 3 1000 pF 0.016 (0.41)* -- -- -- 11 20 28 28 40 SCI-9120-102 3 200 115 10 1000 pF 0.020 (0.51) -- -- -- 11 20 28 28 40 9900-381-6022 2 200 -- 10 1200 pF -- -- -- -- 5 9 20 28 35 45 SCI-9122-502 3 200 115 3 5000 pF 0.016 (0.41)* -- -- 15 24 33 37 40 50 SCI-9120-502 3 200 115 10 5000 pF 0.020 (0.51) -- -- 15 24 33 37 40 50 SCI-9122-103 3 200 115 3 0.01 F 0.016 (0.41)* -- 12 20 29 38 45 50 55 SCI-9120-103 3 200 115 10 0.01 F 0.020 (0.51) -- 12 20 29 38 45 50 55 9900-381-6005 2 200 -- 10 0.015 F -- -- 7 9 20 29 35 45 50 60 54-790-018 1 300 -- 10 1000 pF -- -- -- -- -- 9 20 28 28 40 54-790-021 1 300 -- 10 0.01 F -- -- -- 9 20 29 38 45 50 50 * Tinned, steel leads. 74 Also available through Spectrum Control's authorized distributors. SPECTRUM CONTROL INC. * 8031 Avonia Rd. * Fairview, PA 16415 * Phone: 814-474-2207 * Fax: 814-474-2208 * Web site: www.spectrumcontrol.com SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 *1566 PRINTER 063-120 v2 12/4/06 9:13 AM Page 11 Resin Sealed Bolt-in Filters 4-40 L and Pi Circuit .360 .031 (9.144 .79) .240 .031 (6.10 .79) .156 Hex. (3.96) .120 (3.05) .220 (5.59) #4-40 Unc-2A Thd. Figure 1 Dimensions in inches (mm) 51-729-305 Figure 1 51-729-312 Part Number Rated Voltage 125C DC AC 50 -- I Amp 3 CKT Pi A Min Cap 5500 pF In 0.018 Minimum Insertion Loss (dB) 10 1 3 1 10 30 100 300 (mm) MHz MHz MHz MHz MHz MHz GHz GHz 70 70 14 40 60 70 7 (0.46) -- 1 50 -- 3 Pi 7000 pF 0.018 (0.46) -- 8 15 40 65 70 70 70 SCI-3102-002 1 50 -- 3 LB 0.075 F 0.016 (0.41)* 18 25 37 42 52 55 70 70 SCI-3102-000 1 50 -- 5 LB 0.075 F 0.016 (0.41) 18 25 37 42 52 55 70 70 SCI-3102-007 1 50 -- 10 LB 0.075 F 0.025 (0.64) 18 25 37 42 52 55 70 70 51-729-304 1 100 -- 3 LB 0.022 F 0.018 (0.46) 7 17 27 34 43 47 55 55 SCI-3112-002 1 100 -- 5 LB 0.027 F 0.016 (0.41)* 10 20 30 38 45 45 65 70 SCI-3112-000 1 100 -- 5 LB 0.027 F 0.016 (0.41) 10 20 30 38 45 45 65 70 SCI-3112-007 1 100 -- 10 LB 0.027 F 0.025 (0.64) 10 20 30 38 45 45 65 70 SCI-3112-102 1 100 -- 3 LB 0.05 F 0.016 (0.41)* 15 24 35 42 54 56 70 70 SCI-3112-100 1 100 -- 5 LB 0.05 F 0.016 (0.41) 15 24 35 42 54 56 70 70 SCI-3112-107 1 100 -- 10 LB 0.05 F 0.025 (0.64) 15 24 35 42 54 56 70 70 1 200 -- 3 Pi 1500 pF 0.018 (0.46) -- -- 5 15 42 65 70 70 SCI-3122-002 1 200 115 3 LB 0.01 F 0.016 (0.41)* -- 12 21 30 41 45 70 70 SCI-3122-000 1 200 115 5 LB 0.01 F 0.016 (0.41) -- 12 21 30 41 45 70 70 SCI-3122-007 1 200 115 10 LB 0.01 F 0.025 (0.64) -- 12 21 30 41 45 70 70 51-729-303 Low Pass Filters o A .005 ( .13) * Tinned, steel leads. Also available through Spectrum Control's authorized distributors. SPECTRUM CONTROL INC. * 8031 Avonia Rd. * Fairview, PA 16415 * Phone: 814-474-2207 * Fax: 814-474-2208 * Web site: www.spectrumcontrol.com SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 75 *1566 PRINTER 063-120 v2 12/4/06 9:13 AM Page 12 Resin Sealed Bolt-in Filters 6-32 C, L, Pi/6-40 Pi .500 .031 (12.7 .79) .320 .031 (8.13 .79) #6-40 Unf-2A Thd. o A .005 ( .13) .220 (5.59) .130 (3.30) o .032 .005 (o 0.81 .79) .050 (1.27) .125 (3.18) .950 .031 (24.13 .79) Low Pass Filters .225 (5.72) #6-32 Unc-2A .125 (3.18) Hex. .156 Hex. (3.96) Figure 1 .290 .031 (7.37 .79) Figure 2 o .156 (3.96) Same as Figure 1 except with turret lead Figure 3 Dimensions in inches (mm) Part Number 51-726-008 I Amp 3 CKT Pi Min Cap 5500 pF In 0.018 Minimum Insertion Loss (dB) 10 1 3 1 10 30 100 300 (mm) MHz MHz MHz MHz MHz MHz GHz GHz 30 55 70 70 70 7 14 (0.46) -- A 51-726-017 1 50 -- 3 Pi 9000 pF 0.018 (0.46) -- 8 18 45 65 70 70 70 54-779-019 1 50 -- 10 C 0.10 F 0.032 (0.81) 22 31 40 44 47 55 65 65 54779001X5F100M 1 100 -- 10 C 10 pF 20% 0.032 (0.81) -- -- -- -- -- -- 10 10 54779001X5U102P 1 100 -- 10 C 1000 pF 0.032 (0.81) -- -- -- 10 21 28 28 28 54-779-014 1 100 -- 10 C 2700 pF 0.032 (0.81) -- -- 9 18 27 33 35 35 54-779-016 1 100 -- 10 C 0.01 F 0.032 (0.81) -- 9 20 29 38 45 50 50 51-726-002 3 100 -- 10 LB 0.022 F 0.032 (0.81) 7 17 27 34 43 50 60 60 54-779-017 1 100 -- 10 C 0.027 F 0.032 (0.81) 10 20 30 37 45 50 55 60 54-779-018 1 100 -- 10 C 0.050 F 0.032 (0.81) 15 24 34 41 45 50 60 60 51-726-001 1 200 -- 3 Pi 1500 pF 0.018 (0.46) -- -- 5 15 42 65 70 70 1289-001 2 200 -- 10 Pi 1500 pF 0.032 (0.81) -- -- 5 15 40 60 60 60 1289-004 2 200 -- 10 Pi 3000 pF 0.032 (0.81) -- -- 8 15 50 65 70 70 1 200 -- 10 C 5600 pF 0.032 (0.81) -- -- 15 24 33 37 40 40 54-779-015 76 Figure 1 Rated Voltage 125C DC AC 50 -- Also available through Spectrum Control's authorized distributors. Also available through Spectrum Control's authorized European distributors/agents. SPECTRUM CONTROL INC. * 8031 Avonia Rd. * Fairview, PA 16415 * Phone: 814-474-2207 * Fax: 814-474-2208 * Web site: www.spectrumcontrol.com SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 *1566 PRINTER 063-120 v2 12/4/06 9:13 AM Page 13 Resin Sealed Bolt-in Filters 8-32 C Circuit .421 .031 (10.7 .79) .328 .031 (8.33 .79) .140 (3.56) .890 .031 (22.6 .79) o .040 .005 (1.02 .13) o .032 .005 (0.81 .13) .093 (2.36) .050 (1.27) #8-32 Unc-2A Thd. .234 (5.94) #8-32 Unc-2A Thd. .187 (4.75) .187 Hex. (4.75) .266 (6.77) Figure 2 .466 .031 (11.84 .79) .293 .031 (7.44 .79) .266 (6.76) .631 .031 (16.03 .79) .130 (3.30) .265 .031 (6.73 .79) o .051 .005 (1.3 .13) .093 (2.39) .050 (1.27) Low Pass Filters Figure 1 o .032 .005 (0.81 .13) .312 .031 (7.92 .79) .040 Max. (1.02) #8-32 Unc-2A Thd. #8-32 Unc-2A Thd. Figure 3 Rated Voltage 125C DC AC 50 -- .187 Hex. (4.75) Figure 4 I Amp 10 Min Cap 0.05 F Dimensions in inches (mm) Minimum Insertion Loss (dB) 10 1 3 1 10 30 100 300 MHz MHz MHz MHz MHz MHz GHz GHz 50 60 45 60 24 35 41 15 SCI-9200-503 Figure 2 9950-381-6009 3 50 -- 10 0.12 F 20 30 43 45 55 55 55 55 54-785-017 1 50 -- 10 0.21 F 28 37 45 50 55 60 70 70 9950-381-6008 Part Number .266 (6.77) .187 (4.75) Hex. 3 70 -- 10 0.08 F 15 24 37 41 51 51 55 55 54713001X5F101M 4 100 -- 10 80 pF -- -- -- -- -- 10 20 20 54713001X5U102P 4 100 -- 10 1000 pF -- -- -- 11 20 28 28 28 54-785-013 1 100 -- 10 0.01 F -- 9 20 29 38 45 50 55 SCI-9210-103 2 100 -- 10 0.01 F -- 12 20 29 38 45 50 50 SCI-9210-273 2 100 -- 10 0.027 F 10 20 30 36 45 50 55 60 54-785-005 1 100 -- 10 0.05 F 15 24 34 41 45 50 60 60 54-785-016 1 100 -- 10 0.1 F 20 29 38 44 47 55 65 65 54-785-011 1 150 -- 10 2000 pF -- -- 8 17 26 32 34 35 54-785-012 1 150 -- 10 5000 pF -- 6 15 24 33 37 40 40 SCI-9220-101 2 200 115 10 100 pF -- -- -- -- -- 10 20 25 SCI-9220-102 2 200 115 10 1000 pF -- -- -- 11 20 28 28 28 SCI-9220-502 2 200 115 10 5000 pF -- 6 15 24 33 37 40 40 Also available through Spectrum Control's authorized distributors. SPECTRUM CONTROL INC. * 8031 Avonia Rd. * Fairview, PA 16415 * Phone: 814-474-2207 * Fax: 814-474-2208 * Web site: www.spectrumcontrol.com SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 77 *1566 PRINTER 063-120 v2 12/4/06 9:13 AM Page 14 Resin Sealed Bolt-in Filters 8-32 L & Pi Circuit .600 .031 (15.24 .79) L .031 (L .79) .132 .031 (3.40 .79) .093 (2.36) o .032 .005 (0.81 .13) o .040 .005 (1.02 .13) .187 (4.75) Ref. H .031 (H .79) .266 (6.77) .050 (1.27) .500 .031 (12.70 .79) .320 (8.13) Ref. o .032 .005 (0.81 .13) .093 (2.36) .320 .031 (8.13 .79) .150 (3.81) #8-32 Unc-2A Thd. .336 (8.53) .187 Hex. (4.75) .187 (4.75) Hex. Figure 1 Low Pass Filters .31 Min. (7.9 Min.) .315 (8.00) Max. .238 .031 (6.05 .79) .906 .031 (23.01 .79) .150 (3.81) .475 .031 (12.06 .79) .216 (5.49) o .040 .005 (1.02 .13) 18 Awg. .311 .031 (7.90 .79) .162 .031 (4.11 .79) .138 (3.51) .062 (1.57) .025 (0.64) o .032 .005 (.81 .13) #8-32 Unc-2A Thd. .187 (4.75) Hex. #8-32 Unc-2A Thd. .050 (1.27) Figure 4 .216 (5.49) .187 (4.75) Hex. .187 (4.75) .093 (2.36) #8-32 Unc-2A Thd. Figure 6 Figure 5 Part Number 51-712-069 Rated Voltage Minimum Insertion Loss (dB) M15733 125C H L MIL I Min 10 1 3 1 10 30 100 300 Number Fig. DC Cap In AC Amp CKT In (mm) (mm) MHz MHz MHz MHz MHz MHz GHz GHz -- 70 70 65 70 45 10 18 2 50 -- 9 Pi 0.012 F 0.265 (6.73) 0.413 (10.49) 5 4 50 -- 20 Pi 0.012 F 0.310 (7.87) 0.490 (12.45) -- 10 20 30 65 70 70 70 1250-054 -- 2 70 -- 10 Pi 5000 pF 0.312 (7.92) 0.500 (12.70) -- -- 20 30 65 65 70 70 1293-001 -- 3 70 -- 10 Pi 0.028 F 10 14 38 65 75 75 75 75 -- -- -- -- 51-712-055 /43-0002 2 100 70 10 Pi 3000 pF 0.312 (7.92) 0.578 (14.68) -- -- 5 15 45 50 50 50 51-712-014 /28-0001 2 100 70 10 Pi 3000 pF 0.312 (7.92) 0.890 (22.61) -- -- 5 15 45 60 60 60 51-712-028 /28-0002 5 100 70 10 Pi 3000 pF -- -- 5 15 45 60 60 60 51-712-063* /61-0008 2 100 70 10 Pi 5500 pF 0.312 (7.92) 0.500 (12.70) -- -- 15 35 65 70 70 70 51-712-003 -- 2 100 -- 10 LB 0.022 F 0.280 (7.11) 0.850 (21.59) 7 17 27 34 43 50 60 60 /28-0004 2 100 70 10 LB 0.022 F 0.312 (7.92) 0.890 (22.61) 10 17 28 34 41 50 60 60 51-712-067 /61-0013 2 100 -- 10 LB 0.031 F 0.280 (7.11) 0.890 (22.61) 10 20 30 38 42 52 60 60 51-762-006 /44-0003 6 125 85 15 Pi 65 pF -- -- -- -- -- -- -- -- -- -- 16 42 -- 6 125 -- 15 Pi 1500 pF -- -- -- -- -- -- 5 15 35 45 60 60 51-762-005 /44-0002 6 125 85 15 Pi 1500 pF -- -- -- -- -- -- 5 15 25 35 50 50 1250-062 -- 1 125 -- 15 Pi 3000 pF -- -- -- -- -- -- 5 15 45 45 70 70 51-744-003* /44-0001 1 125 85 15 Pi 3000 pF -- -- -- -- -- -- 10 15 30 40 65 65 SCI-3223-000 -- 2 200 115 10 Pi 2000 pF 0.312 (7.92) 0.890 (22.61) -- -- 8 10 48 50 70 70 1250-003 -- 2 200 -- 10 Pi 3000 pF 0.312 (7.92) 0.890 (22.61) -- -- 5 15 45 65 70 70 51-712-001* -- 2 200 -- 10 Pi 3000 pF 0.312 (7.92) 0.890 (22.61) -- -- 5 15 45 65 70 70 1250-049 -- 2 200 -- 10 Pi 3000 pF 0.312 (7.92) 0.578 (14.68) -- -- 5 15 45 65 65 60 51-744-002 -- 2 200 -- 10 Pi 5500 pF 0.265 (6.73) 0.413 (10.49) -- 7 14 30 55 70 70 70 1293-000 -- 3 200 -- 10 Pi 0.012 F 5 10 28 40 65 70 70 70 51-712-060 1250-059 * Dimensions in inches (mm) /61-0014 51-712-065 78 #8-32 Unc-2A Thd. Figure 3 Figure 2 .49 Min. (12.45 Min.) o .032 .005 (0.81 .13) .187 (4.75) Hex. #8-32 Unc-2A Thd. -- -- -- -- -- -- Also available through Spectrum Control's authorized distributors. Also available through Spectrum Control's authorized European distributors/agents. Denotes parts with turret lead. -- -- Supplied with .040" (1.02mm) diameter lead. SPECTRUM CONTROL INC. * 8031 Avonia Rd. * Fairview, PA 16415 * Phone: 814-474-2207 * Fax: 814-474-2208 * Web site: www.spectrumcontrol.com SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 *1566 PRINTER 063-120 v2 12/4/06 9:13 AM Page 15 Resin Sealed Bolt-in Filters 10-32 C & Pi Circuit .421 .031 (10.7 .79) .328 .031 (8.33 .79) o A .005 ( .13) .140 (3.56) #10-32 Unf-2A Thd. Low Pass Filters .218 (5.54) .234 (5.94) Figure 1 .500 .031 (12.7 .79) .359 .031 (9.12 .79) o A .005 ( .13) .171 (4.34) #10-32 Unf-2A Thd. .328 (8.33) .218 (5.54) Figure 2 Dimensions in inches (mm) Part Number 51-761-002 Figure 1 Rated Voltage 125C DC AC 50 -- I Amp 10 CKT Pi Min Cap 0.018 F In 0.032 Minimum Insertion Loss (dB) 10 1 3 1 10 30 100 300 (mm) MHz MHz MHz MHz MHz MHz GHz GHz 14 30 55 70 70 70 70 7 (0.81) A 54-786-013 1 50 -- 10 C 0.3 F 0.040 (1.02) 30 38 47 50 55 60 70 70 54-786-028 1 50 -- 10 C 0.56 F 0.040 (1.02) 35 43 50 52 60 65 70 70 54-786-014 2 50 -- 10 C 0.8 F 0.040 (1.02) 40 46 52 54 70 70 70 70 51-761-001 1 100 -- 10 Pi 0.01 F 0.032 (0.81) -- 10 20 45 65 70 70 70 54-786-027 1 200 -- 10 C 0.1 F 0.040 (1.02) 20 29 38 44 47 55 65 65 Also available through Spectrum Control's authorized distributors. SPECTRUM CONTROL INC. * 8031 Avonia Rd. * Fairview, PA 16415 * Phone: 814-474-2207 * Fax: 814-474-2208 * Web site: www.spectrumcontrol.com SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 79 *1566 PRINTER 063-120 v2 12/4/06 9:13 AM Page 16 Resin Sealed Bolt-in Filters 12-28 C /12-32 C Circuit .594 .031 (15.08 .79) .406 .031 (10.36 .79) .468 .031 (11.89 .79) o .051 .005 (1.30 .13) .156 (3.96) .406 .031 (10.36 .79) .140 (3.56) #12-32 Unf-2A Thd. #12-28 Unf-2A Thd. .312 (7.92) .250 (6.35) Figure 2 Low Pass Filters Figure 1 .921 .031 (23.4 .79) .343 .031 (8.71 .79) .157 (3.99) .032 .005 (0.81 .13) .312 (7.92) .234 (5.54) .250 (6.35) .453 .031 (11.51 .79) .093 Max. (2.36) o .040 .005 (1.02 .13) .250 (6.35) #12-32 Unef-2A Thd. .359 .031 (9.12 .79) .281 (7.14) .187 (4.75) .062 (1.57) .187 (4.75) .311 (7.9) .312 (7.92) .032 (0.81) #12-32 Unef-2A Thd. Figure 4 Figure 3 Dimensions in inches (mm) 80 I Amp 15 CKT C Min Cap 1 F Minimum Insertion Loss (dB) 10 1 3 1 10 30 100 300 MHz MHz MHz MHz MHz MHz GHz GHz 40 52 52 70 70 78 80 38 9910-381-6004 Figure 4 9910-381-6003 4 50 -- 15 C 0.75 F 35 37 51 51 61 61 65 70 SCI-9310-273 3 100 -- 10 C 0.027 F 10 20 30 37 45 50 55 60 9910-381-6002 4 100 -- 15 C 0.30 F 28 30 45 50 55 55 60 65 54804002X5R101M 2 250 -- 10 C 100 pF 20% -- -- -- -- -- 10 20 25 54804002X5R471M 2 250 -- 10 C 470 pF 20% -- -- -- -- 12 22 25 28 54804002X5V102P 2 250 -- 10 C 1000 pF -- -- -- 10 21 28 28 28 54743001X5U102Z 1 250 -- 15 C 1000 pF -- -- -- -- 20 28 28 28 Part Number Rated Voltage 125C DC AC 35 -- Also available through Spectrum Control's authorized distributors. SPECTRUM CONTROL INC. * 8031 Avonia Rd. * Fairview, PA 16415 * Phone: 814-474-2207 * Fax: 814-474-2208 * Web site: www.spectrumcontrol.com SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 *1566 PRINTER 063-120 v2 12/4/06 9:13 AM Page 17 Resin Sealed Bolt-in Filters 12-28 & 12-32 Pi Circuit .921 .031 (23.4 .79) .359 .031 (9.12 .79) .157 (3.99) o A .005 ( .13) .187 (4.75) #12-32 Unef-2A Thd. o .032 .005 (o .81 .13) .093 Max. (2.36) .250 (6.35) #12-32 Unef-2A Thd. .281 (7.14) B .311 (7.9) .250 (6.35) .187 (4.75) .032 (0.81) Figure 1 Figure 2 .687 .031 (17.4 .79) B .031 ( .79) o .250 (o 6.35) .281 (7.14) o A .005 ( .13) #12-32 Unef-2A Thd. .187 (4.75) .406 (10.31) Same as Figure 3 Except as Shown. Low Pass Filters .453 .031 (11.5 .79) .343 .031 (8.71 .79) Figure 4 .125 (3.18) Figure 3 Same as Figure 1 Except as Shown. Same as Figure 2 Except as Shown. Turret Lead Figure 7 Figure 6 #12-28 Unf-2A Thd. Figure 5 Dimensions in inches (mm) SPECTRUM CONTROL INC. * 8031 Avonia Rd. * Fairview, PA 16415 * Phone: 814-474-2207 * Fax: 814-474-2208 * Web site: www.spectrumcontrol.com SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 81 *1566 PRINTER 063-120 v2 12/4/06 9:13 AM Page 18 Resin Sealed Bolt-in Filters 12-28 & 12-32 Pi Circuit Part Number 51-709-013 Rated Voltage See 125C Pg. 79 I for Fig. DC AC Amp 3 50 -- 10 Min Cap 0.1 F Minimum Insertion Loss (dB) 10 1 3 1 10 30 100 300 In In (mm) (mm) MHz MHz MHz MHz MHz MHz GHz GHz 0.040 (1.02) 0.437 (11.10) 10 40 52 70 70 70 70 70 A B -- 2 50 -- 10 0.15 F 0.032 (0.81) 0.250 (6.35) 12 43 68 70 70 70 70 70 /61-0009 3 70 -- 10 0.012 F 0.032 (0.81) 0.470 (11.94) -- -- -- -- 65 65 65 65 1216-001 -- 3 70 -- 10 0.050 F 0.032 (0.81) 0.468 (11.89) 15 20 60 65 75 75 75 75 1270-016* -- 2 100 -- 10 5500 pF 0.032 (0.81) 0.250 (6.35) -- 7 20 35 65 70 70 70 1270-025 -- 2 100 -- 10 5500 pF 0.032 (0.81) 0.235 (5.97) -- 7 20 35 65 70 70 70 1201-066 -- 1 100 -- 10 5500 pF 0.032 (0.81) -- 7 20 40 68 70 70 70 51-714-055* /61-0011 2 100 -- 10 5500 pF 0.032 (0.81) 0.235 (5.97) -- 7 20 -- 65 70 70 70 51-714-054* /61-0010 2 100 -- 10 5500 pF 0.032 (0.81) 0.250 (6.35) -- 7 20 -- 65 70 70 70 51-714-053* /61-0007 2 100 70 10 5500 pF 0.032 (0.81) 0.250 (6.35) -- 7 -- -- 65 70 70 70 51-714-058* -- 2 100 -- 10 0.025 F 0.032 (0.81) 0.250 (6.35) 10 15 40 60 70 70 70 70 51-714-056 /61-0012 6 100 -- 10 0.025 F 0.032 (0.81) 0.235 (5.97) -- -- -- -- 65 65 65 65 -- 2 100 -- 10 0.10 F 0.032 (0.81) 0.250 (6.35) 10 40 65 70 70 70 70 70 -- 1 200 -- 10 1300 pF 0.040 (1.02) -- -- -- -- 5 10 35 60 70 70 1201-052 -- 5 200 -- 10 3000 pF 0.032 (0.81) -- -- -- -- 5 15 45 45 70 70 1201-054 -- 1 200 -- 10 3000 pF 0.032 (0.81) -- -- -- -- 5 15 45 45 70 70 -- 2 200 -- 10 3000 pF 0.032 (0.81) 0.250 (6.35) -- -- 5 15 43 60 70 70 -- 2 200 -- 10 3000 pF 0.032 (0.81) 0.235 (5.97) -- -- 5 15 45 45 70 70 -- 2 200 -- 10 3000 pF 0.032 (0.81) 0.235 (5.97) -- -- 5 15 43 60 70 70 -- 2 200 -- 10 3000 pF 0.032 (0.81) 0.250 (6.35) -- -- 5 15 45 45 70 70 51-719-053** /61-0001 5 200 140 10 3000 pF 0.032 (0.81) -- -- -- -- -- -- 45 -- 70 70 51-719-054* /61-0002 1 200 140 10 1500 pF 0.032 (0.81) -- -- -- -- -- -- 45 45 70 70 51-714-051* /61-0005 2 200 140 10 1500 pF 0.032 (0.81) 0.250 (6.35) -- -- -- -- 45 45 70 70 51-719-023* /43-0001 5 200 140 10 3000 pF 0.032 (0.81) -- -- -- -- -- 45 45 45 51-714-052* /61-0006 2 200 140 10 3000 pF 0.032 (0.81) 0.235 (5.97) -- -- -- -- 45 45 70 70 51-714-004* -- 2 200 -- 10 5500 pF 0.032 (0.81) 0.235 (5.97) -- 7 14 35 60 70 70 70 51-719-021 -- 1 200 -- 10 5500 pF 0.040 (1.02) -- 7 14 30 50 65 65 65 51-714-002* -- 2 200 -- 10 5500 pF 0.032 (0.81) 0.250 (6.35) -- 7 14 35 60 70 70 70 SCI-3323-000* -- 2 200 115 10 0.012 F 0.032 (0.81) 0.250 (6.35) -- -- 27 30 70 70 70 70 1221-001 -- 4 300 -- 10 5500 pF 0.032 (0.81) 0.437 (11.10) -- -- 15 30 65 70 70 70 51-709-004 /46-0001 4 300 -- 10 5500 pF 0.032 (0.81) 0.437 (11.10) -- -- -- -- 65 70 70 70 1201-086 -- 1 350 -- 10 2500 pF 0.040 (1.02) -- -- -- -- 5 10 50 50 65 65 -- 1 500 -- 10 3000 pF 0.040 (1.02) -- -- -- -- 12 20 45 60 60 60 SCI-3303-000* 51-709-015 Low Pass Filters M15733 MIL Number -- SCI-3313-000* 51-719-022 51-714-001* 1270-024 51-714-003* 1270-009 51-719-011 -- -- -- -- -- -- Also available through Spectrum Control's authorized distributors. Also available through Spectrum Control's authorized European distributors/agents. * Denotes parts supplied with lead as shown in Figure 7. ** Bushing housing will have 1 1/2 imperfect threads at hex to thread interface. 82 SPECTRUM CONTROL INC. * 8031 Avonia Rd. * Fairview, PA 16415 * Phone: 814-474-2207 * Fax: 814-474-2208 * Web site: www.spectrumcontrol.com SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 *1566 PRINTER 063-120 v2 12/4/06 9:13 AM Page 19 Resin Sealed Bolt-in Filters 5/16-24 & 5/16-32 C & Pi Circuit .750 .031 (19.05 .79) .562 .031 (14.27 .79) .437 (11.10) .375 (9.53) .250 (6.35) o .057 .005 (1.45 .13) .750 .031 (19.05 .79) 5/16-24 Unf-2A Thd. .562 .031 (14.27 .79) .437 (11.10) .094 (2.39) .375 (9.53) .250 (6.35) .562 .031 (14.27 .79) .750 .031 (19.05 .79) .437 (11.10) Low Pass Filters Figure 1 o .057 .005 (1.45 .13) .375 (9.53) 5/16-32 Unc-2A Thd. .250 (6.35) .094 (2.39) Figure 2 o .057 .005 (1.45 .13) 5/16-32 Unef-2A Thd. .220 (5.59) Dimensions in inches (mm) Figure 3 Rated Voltage 125C DC AC 100 -- SCI-9510-503 M15733 MIL Number -- Fig. 1 SCI-3513-000 -- 1 100 SCI-3523-000 -- 1 200 SCI-3543-000 -- 1 400 SCI-9550-102 -- 1 500 1202-052 -- 1 1202-054 -- 51-702-020* 51-702-021 CKT C -- 25 Pi 0.1 F 10 18 28 37 70 70 70 70 115 25 Pi 0.02 F -- -- 25 50 66 66 70 70 220 25 Pi 6000 pF -- -- 15 35 54 65 70 70 115 25 C 1000 pF -- -- -- 11 20 28 28 28 500 -- 25 Pi 3000 pF -- -- 10 35 55 55 70 70 2 500 -- 25 Pi 3000 pF -- -- 10 35 55 55 70 70 /61-0003 3 500 350 25 Pi 3000 pF -- -- -- 35 55 55 70 70 /61-0004 3 500 350 25 Pi 3000 pF -- -- 10 35 55 55 70 70 SCI-9550-332 -- 1 500 115 25 C 3300 pF -- -- 12 20 30 33 40 40 SCI-3553-000 -- 1 500 220 25 Pi 0.012 F -- -- 18 28 52 52 70 70 -- 2 700 -- 25 Pi 2000 pF -- -- 5 20 50 55 70 70 Part Number 1202-005 Also available through Spectrum Control's * Denotes parts with 5/16-24 Threads Min Cap 0.05 F Minimum Insertion Loss (dB) 10 1 3 1 10 30 100 300 MHz MHz MHz MHz MHz MHz GHz GHz 45 60 60 60 24 35 41 15 I Amp 25 authorized distributors. SPECTRUM CONTROL INC. * 8031 Avonia Rd. * Fairview, PA 16415 * Phone: 814-474-2207 * Fax: 814-474-2208 * Web site: www.spectrumcontrol.com SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 83 *1566 PRINTER 063-120 v2 12/4/06 9:13 AM Page 20 High Current/High Voltage Resin Sealed Filters High current filters are ideal for use in high current 5 volt logic buss, but also can be used for 48 VDC telephone rack buss, high current switch mode power supplies and DC charging systems. High voltage filters find use in high voltage power supplies and applications requiring U.L. Hi-Pot. for Figure 1 & 2 -- see below (Figure 3 see page 16) Features 1. Mounting installation torque Method A: Mounting in full threaded thru hole Maximum torque: 96 in-lbs I Current ratings up to 100 Amps I Continuous voltage ratings up to 1250 VDC/240 VAC (400Hz) I U.L. 1459 recognized and CSA C22.2 approved versions available I Installation Notes Method B: Mounting w/hardware Maximum torque: 84 in-lbs 2. Terminal installation torque Maximum torque: 20 in-lbs Rugged bolt-in style for easy installation Low Pass Filters Note: Use two wrench method to install terminal hardware 1-1/2 Imperfect Thds. 5/16-24 Unf-2A Thd. .250 (6.35) .060 Max., Typ. o .062 .005 (1.58 .13) Typ. .250 (6.35) Min. .250 (6.35) .250 (6.35) Min. .500 (12.7) Hex. .250 (6.35) Figure 3 84 Dimensions in inches (mm) SPECTRUM CONTROL INC. * 8031 Avonia Rd. * Fairview, PA 16415 * Phone: 814-474-2207 * Fax: 814-474-2208 * Web site: www.spectrumcontrol.com SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 *1566 PRINTER 063-120 v2 12/4/06 9:13 AM Page 21 High Current/High Voltage Resin Sealed Filters High Current High Voltage Feed-thru 1.000 .031 (25.4 .79) 1.250 .031 (31.8 .79) .312 (7.93) .375 (9.53) .250 Flats o .051 .005 (o 1.30 .13) .327 Max. (8.30 Max.) .578 Max. (14.68 Max.) Mounting Surface 5/16-24 Unf-2A .990 .031 (25.15 .79) .325 (8.26) .740 .031 (18.61 .79) Mounting Surface 3/8-32unef-2A Thd. .375 (9.53) .500 (12.70) o .057 .005 (o 1.45 .13) .075 (1.91) .020 (.51) Figure 5 .125 (3.18) Low Pass Filters Figure 4 .689 .031 (17.5 .79) .937 .031 (23.8 79) .500 (12.7) 3/8-32 Unef-2A Thd. Figure 6 Dimensions in inches (mm) Rated Voltage 125C DC AC*** 60 -- I Amp 50 CKT C Min Cap 0.22 F Minimum Insertion Loss (dB) 10 1 3 1 10 30 100 300 MHz MHz MHz MHz MHz MHz GHz GHz 50 50 50 50 50 30 40 20 54-848-005* Figure 1 54-853-001* 2 60 -- 50 C 0.22 F 20 30 40 50 50 50 50 50 54-853-004 2 200 140 100 C 0.22 F 20 30 40 50 50 50 50 50 54-848-008 1 200 140 100 C 0.22 F 20 30 40 50 50 50 50 50 54-844-001** 3 600 240 25 C 4700 pF 20% -- -- 12 20 30 33 50 50 54-844-002** 3 600 240 25 C 0.01 F 20% 3 7 20 25 35 40 57 57 54-763-008 4 750 -- 25 C 1000 pF -- -- -- 10 20 28 28 28 54-763-009 4 750 -- 25 C 4000 pF -- -- 10 22 32 35 35 40 54-789-003 5 1250 -- 25 C 4000 pF -- -- 6 20 30 35 35 35 1280-060 6 2500 -- 25 Pi 1500 pF -- -- 5 15 50 50 50 50 Part Number Also available through Spectrum Control's authorized distributors. Also available through Spectrum Control's authorized European distributors/agents. * Denotes parts that are UL recognized to UL 60950 and certified to CSA C22.2 ** Denotes parts that meet 1500 VAC Dielectric Withstanding Voltage per UL 1283 and *** AC Voltage to be 400Hz CSA C22.2 SPECTRUM CONTROL INC. * 8031 Avonia Rd. * Fairview, PA 16415 * Phone: 814-474-2207 * Fax: 814-474-2208 * Web site: www.spectrumcontrol.com SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 85 *1566 PRINTER 063-120 v2 12/4/06 9:13 AM Page 22 Hermetically Sealed Threaded Case Filters This series of filters features hermetic glass seals and high EMI filtering performance. They are excellent for critical applications that demand high reliability in the toughest environmental conditions and provide broadband high performance EMI filtering from 10 KHz to over 10 GHz. Low Pass Filters Features I Popular .375", .410" and .690" case diameters I Voltage ratings from 50 VDC to 400 VDC/240 VAC, 400 Hz I Filter configurations available: C, L, Pi, T and double T I MIL-F-15733 and MIL-F-28861 QPL filters available Thread length: A - 0.187 (4.76) B - 0.312 (7.92) L .200 (5.08) A/B .160 (4.064) Max. o .385 Max. (9.78) 1/4-28 Unf-2A Thd. .050 (1.27) x .070 (1.78) Slot, both ends .176 (4.47) L Figure 1 A/B .160 (4.064) Max. o .385 Max. (9.78) .115 Ref. (2.92) #12-32 Unef-2A Thd. Note: o .410 Max. for M28861 parts .050 (1.27) x .070 (1.78) Slot, both ends Figure 2 86 Dimensions in inches (mm) SPECTRUM CONTROL INC. * 8031 Avonia Rd. * Fairview, PA 16415 * Phone: 814-474-2207 * Fax: 814-474-2208 * Web site: www.spectrumcontrol.com SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 *1566 PRINTER 063-120 v2 12/4/06 9:13 AM Page 23 Hermetically Sealed Threaded Case Filters .375 o C Circuit Standard See MIL Pg. 84 No for Fig. -- 1 Rated Voltage 85C 125C DC AC DC AC 80 -- 50 -- 54-370-007 -- 1 80 -- 50 -- 15 2.800 0.005 0.576 (14.630) A 20 34 39 50 60 70 70 54-371-001 -- 1 80 -- 50 -- 15 4.000 0.005 0.688 (17.475) A 26 40 46 55 60 70 70 54-367-005 -- 1 150 -- 100 -- 15 0.450 0.005 0.387 (9.830) A 6 19 25 36 55 70 70 9920-100-6002 -- 1 200 -- 150 125 15 0.150 0.005 0.387 (9.830) A -- 6 15 26 42 55 70 54-367-007 -- 1 250 -- 200 125 15 0.015 0.005 0.387 (9.830) A -- -- -- 6 25 45 50 54-367-006 -- 1 250 -- 200 125 15 0.250 0.005 0.387 (9.830) A -- 14 19 30 50 65 70 54-370-006 -- 1 250 -- 200 125 15 0.500 0.005 0.630 (16.002) A 7 20 28 39 55 70 70 9923-100-6004 -- 1 400 -- 400 240 15 0.060 0.005 0.415 (10.541) A -- 5 10 18 38 55 70 .375 o C Circuit MIL Qualified M15733 See M28861 Pg. 84 Part Number MIL No for Fig. 1 54-367-054 1-012 Rated Voltage 85C 125C DC AC DC AC -- -- 50 -- (See MIL index on page 244-246 for complete MIL part number listing) Min Cap I Amp F 15 1.200 Minimum Insertion Loss (dB) DCR Max Max Thd 30 150 300 L 1 1 10 100 Ohms In (mm) Lgth KHz KHz KHz MHz MHz MHz GHz 0.008 0.410 (10.414) B 33 40 70 70 15 28 40 1-002 1 -- -- 50 -- 15 1.200 0.008 0.410 (10.414) A 15 28 33 40 40 70 70 54-370-032 49-0008 1 -- -- 50 -- 15 2.100 0.010 0.576 (14.630) A 20 33 40 50 65 70 70 1-014 1 -- -- 70 -- 15 0.700 0.008 0.410 (10.414) B 10 24 30 40 40 64 70 54-370-030 34-0035 2 -- -- 100 -- 10 0.300 0.004 0.474 (12.040) A 7 19 25 35 55 70 70 54-367-051 1-006 1 -- -- 100 -- 15 0.450 0.008 0.410 (10.414) A 6 19 25 36 40 60 70 54-367-056 1-016 1 -- -- 100 -- 15 0.450 0.008 0.410 (10.414) B 6 19 25 36 40 60 70 54-367-057 1-018 1 -- -- 150 -- 15 0.250 0.008 0.410 (10.414) B -- 14 20 31 40 56 70 54-367-053 1-010 1 -- -- 200 125 15 0.150 0.008 0.410 (10.414) A -- 10 16 26 40 52 70 54-367-058 1-020 1 -- -- 200 125 15 0.150 0.008 0.410 (10.414) B -- 10 16 26 40 52 70 54-370-034 49-0010 1 -- -- 330 -- 15 0.062 0.004 0.680 (17.272) A -- 2 7 17 37 55 70 54-367-049 54-367-055 Minimum Insertion Loss (dB) DCR Max Max Thd 30 150 300 L 1 1 10 100 Ohms In (mm) Lgth KHz KHz KHz MHz MHz MHz GHz 0.005 0.387 (9.830) A 60 70 15 28 33 44 70 Low Pass Filters Part Number 54-367-008 Min Cap I Amp F 15 1.400 Also available through Spectrum Control's authorized distributors. SPECTRUM CONTROL INC. * 8031 Avonia Rd. * Fairview, PA 16415 * Phone: 814-474-2207 * Fax: 814-474-2208 * Web site: www.spectrumcontrol.com SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 87 *1566 PRINTER 063-120 v2 12/4/06 9:13 AM Page 24 L-C Filter LT Threaded End Hermetically Sealed Threaded Case Filters L-C Filter LB Threaded End .375 o L Circuit Thread length: A - 0.187 (4.76) B - 0.312 (7.92) L .200 (5.08) A/B 1/4-28 Unf-2A Thd. .160 (4.064) Max. .200 (5.08) .347 (8.814) o .385 Max. (9.78) .050 (1.27) x .070 (1.78) Slot, both ends 1/4-28 Unf-2A Thd. Figure 1 Low Pass Filters .200 (5.08) .467 (11.86) Max. Note: o .410 Max. for M28861 parts o .040 .001 (1.02 .025) .080 (2.032) Max. 1/4-28 Unf-2A Thd. o .410 (10.41) Max. A/B L Figure 2 Resin Sealed Not Hermetically Sealed o .040 .001 (1.02 .025) Typ. L A/B .200 (5.08) 1/4-28 Unf-2A Thd. o .410 (10.41) Max. Figure 3 .200 (5.08) 1/4-28 Unf-2A Thd. #16Awg, .051 (1.30) o o .040 (1.02) A/B L o .385 (9.78) Max. .343 (8.712) Max. L .250 .030 (6.35 0.8) A/B o .385 (9.78) Max. Figure 5 Dimensions in inches (mm) Figure 4 .375 o L Standard Low Profile Rated Voltage Min I Cap 85C 125C MIL F No Figure DC AC DC AC Amp 50 -- -- 80 -- 15 1.200 1 Minimum Insertion Loss (dB) DCR Max Max Thd 30 150 300 L 1 1 10 100 Ohms CKT In (mm) Lgth KHz KHz KHz MHz MHz MHz GHz 0.005 LB 0.370 (9.398) A 60 25 34 44 15 70 70 51-359-001 -- 1 80 -- 50 -- 15 1.400 0.005 LB 0.370 (9.398) A 15 28 33 44 60 70 70 SCI-1021-000 -- 2* 80 -- 50 -- 15 1.400 0.003 LB 0.280 (7.112) A 15 28 33 44 60 70 70 9053-100-0001 -- 1 80 -- 50 -- 15 1.400 0.005 LB 0.370 (9.398) A 15 25 34 44 60 70 70 51-717-001 -- 2* 80 -- 50 -- 15 1.400 0.005 LB 0.325 (8.255) A 15 28 33 44 60 70 70 51-344-006 -- 4 80 -- 50 -- 15 1.400 0.005 LB 0.330 (8.382) A 15 28 33 44 60 70 70 SCI-1020-000 -- 1 80 -- 50 -- 15 1.400 0.003 LB 0.370 (9.398) A 15 28 33 44 60 70 70 SCI-1021-020 -- 2 * 80 -- 50 -- 15 1.400 0.003 LB 0.280 (7.112) B 15 28 33 44 60 70 70 SCI-1020-020 -- 1 80 -- 50 -- 15 1.400 0.003 LB 0.370 (9.398) B 15 28 33 44 60 70 70 SCI-1150-001 -- 1 80 -- 50 -- 15 2.800 0.003 LB 0.450 (11.430) B 20 34 40 49 60 70 70 9051-101-0018 -- 5 80 -- 50 -- 25 1.400 0.001 LB 0.450 (11.430) A 15 25 34 44 60 70 70 9053-100-0008 -- 1 100 -- 70 -- 15 0.700 0.005 LB 0.370 (9.398) A 9 20 29 39 52 70 70 Part Number 9051-100-0000 * Part is resin sealed, this is not a hermetic part. Also available through Spectrum Control's authorized distributors. Also available through Spectrum Control's authorized European distributors/agents. 88 Note: 0.462" (11.73mm) length from mounting surface to end of lead -- not 0.347" (8.8mm). SPECTRUM CONTROL INC. * 8031 Avonia Rd. * Fairview, PA 16415 * Phone: 814-474-2207 * Fax: 814-474-2208 * Web site: www.spectrumcontrol.com SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 *1566 PRINTER 063-120 v2 12/4/06 9:13 AM Page 25 L-C Filter LT Threaded End Hermetically Sealed Threaded Case Filters L-C Filter LB Threaded End .375 o L Standard Low Profile continued Minimum Insertion Loss (dB) DCR Max Max Thd 30 150 300 L 1 1 10 100 Ohms CKT In (mm) Lgth KHz KHz KHz MHz MHz MHz GHz 0.005 LB 0.325 (8.255) A 29 39 52 70 9 20 70 0.005 LB 0.370 (9.398) A 4 12 21 31 48 70 70 SCI-1250-001 -- 1 150 -- 100 -- 15 0.500 0.003 LB 0.450 (11.430) B 8 20 25 34 50 64 70 SCI-2150-000 -- 1 150 -- 100 -- 15 1.000 0.003 LB 0.450 (11.430) A 10 25 30 41 56 70 70 SCI-2150-001 -- 1 150 -- 100 -- 15 1.000 0.003 LB 0.450 (11.430) B 10 25 30 41 56 70 70 51-717-007 -- 2* 250 125 200 125 15 0.015 0.005 LB 0.325 (8.255) A -- -- -- 6 25 38 45 51-359-007 -- 1 250 125 200 125 15 0.015 0.005 LB 0.370 (9.398) A -- -- -- 6 25 38 50 -- 2 350 125 300 125 15 0.150 0.008 LB 0.325 (8.255) A -- 10 15 25 40 52 60 SCI-2350-000 -- 1 300 125 300 125 15 0.250 0.003 LB 0.450 (11.430) A 4 15 21 31 50 70 70 SCI-2350-001 -- 1 300 125 300 125 15 0.250 0.003 LB 0.450 (11.430) B 4 15 21 31 50 70 70 9050-100-0011 * Part is resin sealed, this is not a hermetic part. (See MIL index on page 244-246 for complete MIL part number listing) .375 o L Circuit MIL Qualified Low Profile Rated Voltage Min M15733 See I Cap 85C 125C M28861 Pg. 86 Part Number MIL No for Fig DC AC DC AC Amp F 50 -- -- 10 1.400 1 51-359-021 38-0004 Minimum Insertion Loss (dB) DCR Max Thd 30 150 300 Max L 1 1 10 100 Ohms CKT In (mm) Lgth KHz KHz KHz MHz MHz MHz GHz 0.008 LB 0.370 (9.398) A 70 70 60 28 33 44 15 51-359-024 38-0005 1 80 -- 50 -- 10 1.400 0.008 LB 0.370 (9.398) A 15 28 33 44 60 70 70 51-359-051 58-0001 1 80 -- 50 -- 10 1.400 0.008 LB 0.545 (13.843) A 15 28 33 44 60 70 70 51-359-105 58-0004 1 80 -- 50 -- 10 1.400 0.008 LT 0.545 (13.843) B 15 28 33 44 60 70 70 51-359-044 49-0006 1 100 -- 50 -- 15 1.200 0.010 LB 0.370 (9.398) A 15 28 33 44 60 70 70 51-359-055 49-0007 3 100 -- 50 -- 15 1.200 0.010 LB 0.450 (11.43) A 15 28 33 44 60 70 70 51-359-081 1-001 1 -- -- 50 -- 15 1.400 0.008 LB 0.410 (10.414) A 15 28 33 40 40 70 70 51-359-086 1-011 1 -- -- 50 -- 15 1.400 0.008 LB 0.410 (10.414) B 15 28 33 40 40 70 70 51-359-053 49-0001 51-359-082 1-003 4 100 -- 50 -- 15 0.680 0.010 LB 0.319 (8.103) A 8 20 28 38 55 70 70 1 -- -- 70 -- 15 0.700 0.008 LB 0.410 (10.414) A 10 24 30 40 40 64 70 51-359-083 1-005 1 -- -- 100 -- 15 0.450 0.008 LB 0.410 (10.414) A 6 19 25 36 40 60 70 51-359-088 1-015 1 -- -- 100 -- 15 0.450 0.008 LB 0.410 (10.414) B 6 19 25 36 40 60 70 51-359-084 1-007 1 -- -- 150 -- 15 0.250 0.008 LB 0.410 (10.414) A -- 14 20 31 40 56 70 51-359-050 38-0008 1 -- -- 200 125 15 0.030 0.008 LB 0.370 (9.398) A -- -- -- 6 25 42 60 51-359-085 1-009 1 -- -- 200 125 15 0.150 0.008 LB 0.410 (10.414) A -- 10 16 26 40 52 70 51-359-090 1-019 1 -- -- 200 125 15 0.150 0.008 LB 0.410 (10.414) B -- 10 16 26 40 52 70 Low Pass Filters Rated Voltage Min See I Cap 85C 125C MIL Pg. 86 Part Number F No for Fig DC AC DC AC Amp 100 -- 70 -- 2* 15 0.750 9050-100-0008 -- 150 -- 100 -- 1 15 0.500 9053-100-0002 -- Also available through Spectrum Control's authorized distributors. Also available through Spectrum Control's authorized European distributors/agents. SPECTRUM CONTROL INC. * 8031 Avonia Rd. * Fairview, PA 16415 * Phone: 814-474-2207 * Fax: 814-474-2208 * Web site: www.spectrumcontrol.com SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 89 *1566 PRINTER 063-120 v2 12/4/06 9:13 AM Page 26 L-C Filter LT Threaded End Hermetically Sealed Threaded Case Filters L-C Filter LB Threaded End .375 o L Circuit L .200 (5.08) A/B .160 (4.064) Max. .190 Max. (3.81) o .385 Max. (9.78) .050 (1.27) x .070 (1.78) Slot, both ends 1/4-28 Unf-2A Thd. .115 Ref. (2.92) Thread length: A - 0.187 (4.76) B - 0.312 (7.92) Low Pass Filters .150 (3.81) Max. A/B o .385 Max. (9.78) Figure 1 Note: o .410 Max. for M28861 parts 1/4-28 Unf-2A Thd. o .060 (1.524) Ref. Both ends Dimensions in inches (mm) .375 o L Circuit Standard Product Part Number 51-353-007 Rated Voltage Minimum Insertion Loss (dB) DCR Max Min Max Thd 30 150 300 I L Cap 85C 125C MIL 1 1 10 100 Ohms CKT F No Figure DC AC DC AC Amp In (mm) Lgth KHz KHz KHz MHz MHz MHz GHz -- 80 -- 50 -- 0.06 1.400 70.000 LB 0.770 (19.558) A 44 70 70 70 70 70 70 1 51-353-095 -- 1 80 -- 50 -- 0.15 1.400 12.000 LT 0.960 (24.384) A 21 52 64 70 70 70 70 51-353-003 -- 1 80 -- 50 -- 0.45 1.400 1.200 LB 0.770 (19.558) A 16 31 37 55 70 70 70 51-353-099 -- 1 80 -- 50 -- 1.00 1.400 0.250 LT 0.770 (19.558) A 16 33 44 70 70 70 70 51-353-100 -- 1 80 -- 50 -- 5.00 1.400 0.015 LT 0.770 (19.558) A 15 28 33 46 70 70 70 -- 1 80 -- 50 -- 10.00 1.200 0.010 LB 0.450 (11.430) A 15 28 33 44 60 70 70 9200-300-0025 90 .200 (5.08) L Also available through Spectrum Control's authorized distributors. SPECTRUM CONTROL INC. * 8031 Avonia Rd. * Fairview, PA 16415 * Phone: 814-474-2207 * Fax: 814-474-2208 * Web site: www.spectrumcontrol.com SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 *1566 PRINTER 063-120 v2 12/4/06 9:13 AM Page 27 L-C Filter LT Threaded End Hermetically Sealed Threaded Case Filters L-C Filter LB Threaded End .375 o L Circuit Standard Product continued Minimum Insertion Loss (dB) DCR Max Thd 30 150 300 Max L 1 1 10 100 Ohms CKT In (mm) Lgth KHz KHz KHz MHz MHz MHz GHz 0.010 LB 0.450 (11.430) B 70 70 44 60 33 15 28 0.010 LT 0.450 (11.430) A 14 28 33 44 60 70 70 51-353-109 -- 1 80 -- 50 -- 10.00 1.400 0.010 LT 0.450 (11.430) B 15 28 33 44 60 70 70 51-353-120 -- 1 150 -- 100 -- 1.00 0.750 0.250 LB 0.758 (19.253) A 9 27 36 57 70 70 70 9000-103-0019 -- 1 150 -- 100 -- 5.00 0.450 0.015 LT 0.758 (19.253) B 6 20 26 37 68 70 70 SCI-2120-014 -- 1 150 -- 100 -- 10.00 1.000 0.003 LB 0.450 (11.430) B 14 28 34 44 52 70 70 51-353-110 -- 1 250 -- 200 125 1.00 0.250 0.250 LT 0.758 (19.253) A -- 17 29 50 70 70 70 51-353-111 -- 1 250 -- 200 125 1.00 0.250 0.250 LB 0.758 (19.253) A -- 17 29 50 70 70 70 51-353-112 -- 1 250 -- 200 125 3.00 0.250 0.050 LT 0.758 (19.253) A -- 13 20 35 70 70 70 51-353-113 -- 1 250 -- 200 125 3.00 0.250 0.050 LB 0.758 (19.253) A -- 13 20 35 70 70 70 51-353-114 -- 1 250 -- 200 125 5.00 0.250 0.015 LT 0.758 (19.253) A -- 12 20 30 62 70 70 51-353-116 -- 1 250 -- 200 125 10.00 0.250 0.010 LT 0.450 (11.430) A -- 15 20 30 50 70 70 SCI-2320-010 -- 1 300 -- 300 125 0.50 0.150 1.000 LB 0.758 (19.253) B -- 23 35 56 70 70 70 SCI-2320-004 -- 1 300 -- 300 125 1.00 0.150 0.250 LB 0.758 (19.253) A -- 10 21 41 70 70 70 SCI-2320-005 -- 1 300 -- 300 125 2.00 0.150 0.063 LB 0.758 (19.253) A -- 8 14 30 70 70 70 SCI-2320-006 -- 1 300 -- 300 125 3.00 0.150 0.027 LB 0.758 (19.253) A -- 8 14 26 64 70 70 SCI-2320-007 -- 1 300 -- 300 125 10.00 0.150 0.003 LB 0.450 (11.430) A -- 8 14 25 45 52 70 SCI-2320-014 -- 1 300 -- 300 125 10.00 0.150 0.003 LB 0.450 (11.430) B -- 8 14 25 45 52 70 (See MIL index on pages 244-246 for complete MIL part number listing) .375 o L Circuit MIL Qualified Profile Rated Voltage Min M15733 See I Cap 85C 125C MIL Pg. 88 Part Number F for Fig DC AC DC AC Amp No -- -- 50 -- 0.50 1.400 1 51-390-018 23-0026 Low Pass Filters Rated Voltage Min See I Cap 85C 125C MIL Pg. 88 Part Number F No for Fig DC AC DC AC Amp 80 -- 50 -- 10.00 1.200 1 9200-303-0095 -- 50 -- 10.00 1.400 -- 80 -- 1 51-353-101 Minimum Insertion Loss (dB) DCR Max Max Thd 30 150 300 L 1 1 10 100 Ohms CKT In (mm) Lgth KHz KHz KHz MHz MHz MHz GHz 0.360 LB 0.630 (16.002) A 70 70 70 12 36 48 69 51-390-026 23-0038 1 -- -- 50 -- 1.00 1.400 0.140 LB 0.630 (16.002) A 11 26 36 55 70 70 70 51-390-034 23-0050 1 -- -- 50 -- 2.00 1.400 0.070 LB 0.630 (16.002) A 10 24 32 48 70 70 70 51-353-067 24-0006 1 80 -- 50 -- 10.00 1.400 0.010 LB 0.760 (19.304) B 15 28 31 42 56 70 70 51-353-207 34-0007 1 -- -- 50 -- 10.00 1.400 0.010 LB 0.760 (19.304) A 15 28 31 42 56 70 70 51-444-072 58-0002 1 80 -- 50 -- 10.00 1.400 0.008 LT 0.545 (13.843) A 15 28 33 44 60 70 70 51-353-066 24-0005 1 80 -- 50 -- 10.00 1.400 0.010 LB 0.760 (19.304) A 15 28 31 42 56 70 70 51-353-287 39-0014 1 -- -- 50 -- 10.00 1.400 0.003 LT 0.760 (19.304) B 14 28 34 44 52 70 70 51-444-060 24-0008 1 80 -- 50 -- 10.00 1.400 0.010 LT 0.740 (18.796) B 15 28 31 42 56 70 70 51-343-028 38-0002 1 -- -- 50 -- 15.00 1.400 0.008 LB 0.481 (12.217) A 15 28 33 44 64 70 70 51-343-034 38-0006 1 -- -- 50 -- 15.00 1.400 0.008 LB 0.481 (12.217) B 15 28 33 44 64 70 70 51-353-053 25-0003 1 -- -- 100 -- 1.00 0.450 0.250 LB 0.738 (18.745) A 6 23 34 55 70 70 70 51-353-054 25-0005 1 -- -- 100 -- 5.00 0.450 0.015 LT 0.758 (19.253) A 6 17 23 35 69 70 70 51-353-055 25-0008 1 -- -- 100 -- 5.00 0.450 0.015 LB 0.738 (18.745) A 6 17 23 35 69 70 70 51-353-155 39-0008 1 -- -- 100 -- 5.00 0.450 0.015 LB 0.760 (19.304) A 6 20 26 35 60 60 70 51-444-039 25-0017 1 -- -- 100 -- 5.00 0.450 0.015 LT 0.758 (19.253) B 6 17 23 35 69 70 70 Also available through Spectrum Control's authorized distributors. SPECTRUM CONTROL INC. * 8031 Avonia Rd. * Fairview, PA 16415 * Phone: 814-474-2207 * Fax: 814-474-2208 * Web site: www.spectrumcontrol.com SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 91 *1566 PRINTER 063-120 v2 12/4/06 9:13 AM Page 28 L-C Filter LT Threaded End Hermetically Sealed Threaded Case Filters L-C Filter LB Threaded End .375 o L Circuit MIL Qualified Profile Low Pass Filters Rated Voltage Min M15733 See I Cap 85C 125C MIL Pg. 88 Part Number F for Fig DC AC DC AC Amp No -- -- 100 5.00 0.450 1 51-444-040 25-0020 92 continued (See MIL index on pages 244-246 for complete MIL part number listing) Minimum Insertion Loss (dB) DCR Max Thd 30 150 300 Max L 1 1 10 100 Ohms CKT In (mm) Lgth KHz KHz KHz MHz MHz MHz GHz 0.015 LB 0.738 (18.745) B 69 23 6 17 70 70 35 51-353-156 39-0009 1 -- -- 100 10.00 0.450 0.003 LT 0.760 (19.304) A 10.00 0.450 6 20 26 35 56 60 70 51-353-157 39-0010 1 -- -- 100 0.003 LB 0.760 (19.304) A 6 20 26 35 56 60 70 51-353-076 26-0001 1 -- -- 150 125 1.00 0.250 0.250 LT 0.758 (19.253) A -- 13 24 45 80 70 70 51-353-077 26-0003 1 -- -- 150 125 1.00 0.250 0.250 LB 0.738 (18.745) A -- 13 24 45 80 70 70 51-444-043 26-0013 1 -- -- 150 125 1.00 0.250 0.250 LT 0.758 (19.253) B -- 13 24 45 80 70 70 51-444-044 26-0015 1 -- -- 150 125 1.00 0.250 0.250 LB 0.738 (18.745) B -- 13 24 45 80 70 70 51-390-040 23-0058 1 -- -- 150 2.00 0.250 0.070 LT 0.630 (16.002) A 3 15 23 38 60 70 60 51-390-039 23-0057 1 -- -- 150 2.00 0.250 0.070 LT 0.630 (16.002) B 3 15 23 38 60 70 60 51-444-005 34-0015 1 -- -- 150 125 3.00 0.150 0.050 LT 0.758 (19.253) B -- 8 15 30 68 70 70 51-353-078 26-0004 1 -- -- 150 125 3.00 0.250 0.050 LT 0.758 (19.253) A -- 8 15 30 68 70 70 51-353-079 26-0006 1 -- -- 150 125 3.00 0.250 0.050 LB 0.738 (18.745) A -- 8 15 30 68 70 70 51-444-046 26-0018 1 -- -- 150 125 3.00 0.250 0.050 LB 0.738 (18.745) B -- 8 15 30 68 70 70 51-444-047 26-0019 1 -- -- 150 125 5.00 0.250 0.015 LT 0.758 (19.253) B -- 8 14 25 58 70 70 51-353-080 26-0007 1 -- -- 150 125 5.00 0.250 0.015 LT 0.758 (19.253) A -- 8 14 25 58 70 70 51-353-081 26-0010 1 -- -- 150 125 5.00 0.250 0.015 LB 0.738 (18.745) A -- 8 14 25 58 70 70 51-444-027 34-0030 1 -- -- 200 125 5.00 0.250 0.150 LB 0.900 (22.860) A 2 15 21 32 60 70 70 51-444-117 54-0018 2 -- -- 300 125 1.00 0.150 0.250 LB 0.740 (18.796) A -- 10 21 41 70 70 70 Also available through Spectrum Control's authorized distributors. SPECTRUM CONTROL INC. * 8031 Avonia Rd. * Fairview, PA 16415 * Phone: 814-474-2207 * Fax: 814-474-2208 * Web site: www.spectrumcontrol.com SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 *1566 PRINTER 063-120 v2 12/4/06 9:13 AM Page 29 Hermetically Sealed Threaded Case Filters .375 o Pi Circuit Thread length: A - 0.187 (4.76) B - 0.312 (7.92) L A/B .160 (4.064) Max. .200 (5.08) o .385 Max. (9.779) .115 Ref. (2.921) .050 (1.27) x .070 (1.78) Slot, both ends A/B L .200 (5.08) Max. .150 (3.81) Max. 1/4-28 Unf-2A Thd. Figure 1 .062 (1.52) o Hole Both ends 1/4-28 Unf-2A Thd. .115 Ref. (2.92) Figure 2 Dimensions in inches (mm) .375 o Pi Circuit Standard Product MIL No Figure -- 2 Rated Voltage 85C 125C DC AC DC AC 50 -- 80 -- SCI-2030-004 -- 2 80 -- 50 SCI-2030-005 -- 2 80 -- 50 SCI-2030-006 -- 2 80 -- Part Number SCI-2030-010 Minimum Insertion Loss (dB) DCR Max Max Thd 30 150 300 L 1 1 10 100 Ohms In (mm) Lgth KHz KHz KHz MHz MHz MHz GHz 1.000 0.758 (19.253) B 70 70 66 70 70 70 24 -- 1.00 1.500 0.250 0.758 (19.253) A 15 54 70 70 70 70 70 -- 2.00 1.500 0.063 0.758 (19.253) A -- 45 62 70 70 70 70 50 -- 3.00 1.500 0.027 0.758 (19.253) A -- 35 55 70 70 70 70 SCI-2030-013 -- 2 80 -- 50 -- 3.00 1.500 0.027 0.758 (19.253) B -- 35 55 70 70 70 70 9001-100-1080 -- 1 80 -- 50 -- 5.00 2.800 0.015 0.758 (19.253) A -- 18 60 70 70 70 70 9001-100-1081 -- 1 80 -- 50 -- 10.0 2.800 0.005 0.758 (19.253) A 21 32 40 35 68 70 70 SCI-2130-009 -- 1 150 -- 100 -- 0.25 1.000 4.000 0.758 (19.253) B 28 70 70 70 70 70 70 51-311-319 -- 1 150 -- 100 -- 0.50 1.000 0.600 0.758 (19.253) A -- 51 69 70 70 70 70 -- 1 150 -- 100 -- 0.50 1.000 0.600 0.758 (19.253) A 6 39 68 70 70 70 70 -- 1 150 -- 100 -- 1.00 1.000 0.250 0.758 (19.253) A -- 41 60 70 70 70 70 9001-100-1010 51-311-320 9001-100-1013 Min Cap I Amp F 0.50 1.500 -- 1 150 -- 100 -- 1.00 1.000 0.250 0.758 (19.253) A -- 28 59 70 70 70 70 51-311-321 -- 1 150 -- 100 -- 3.00 1.000 0.060 0.758 (19.253) A -- 16 41 70 70 70 70 51-311-322 -- 1 150 -- 100 -- 5.00 1.000 0.015 0.758 (19.253) A -- -- 28 65 70 70 70 SCI-2130-007 -- 1 150 -- 100 -- 10.0 1.000 0.003 0.758 (19.253) A 9 24 29 40 70 70 70 SCI-2130-014 -- 1 150 -- 100 -- 10.0 1.000 0.005 0.758 (19.253) B 9 24 29 40 70 70 70 51-311-316 -- 1 250 125 200 125 1.00 0.300 0.250 0.758 (19.253) A -- 20 40 70 70 70 70 51-311-317 -- 1 250 125 200 125 3.00 0.300 0.050 0.758 (19.253) A -- -- 20 55 70 70 70 9001-100-1025 -- 1 250 125 200 125 5.00 0.300 0.015 0.758 (19.253) A -- -- 12 50 70 70 80 SCI-2330-009 -- 1 300 125 300 125 0.25 0.300 4.000 0.758 (19.253) B 8 50 66 70 70 70 70 SCI-2330-010 -- 1 300 125 300 125 0.50 0.300 1.000 0.758 (19.253) B -- 40 56 70 70 70 70 SCI-2330-012 -- 1 300 125 300 125 2.00 0.300 0.063 0.758 (19.253) B -- 18 33 63 70 70 70 SCI-2330-007 -- 1 300 125 300 125 10.0 0.300 0.003 0.758 (19.253) A -- 14 20 30 70 70 70 Low Pass Filters o .385 Max. (9.779) Also available through Spectrum Control's authorized distributors. SPECTRUM CONTROL INC. * 8031 Avonia Rd. * Fairview, PA 16415 * Phone: 814-474-2207 * Fax: 814-474-2208 * Web site: www.spectrumcontrol.com SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 93 *1566 PRINTER 063-120 v2 12/4/06 9:13 AM Page 30 Hermetically Sealed Threaded Case Filters (See MIL index on pages 244-246 for complete MIL part number listing) .375 o Pi Circuit MIL Qualified Product Low Pass Filters See M15733 Pg. 91 Part Number MIL No for Fig. 1 51-390-305 23-0017 Rated Voltage 85C 125C DC AC DC AC 50 -- -- -- Min Cap I Amp F 0.30 2.800 Minimum Insertion Loss (dB) DCR Max Thd 30 150 300 Max L 1 1 10 100 Ohms In (mm) Lgth KHz KHz KHz MHz MHz MHz GHz 0.770 0.730 (18.542) B 80 80 73 80 80 29 80 51-390-314 23-0042 1 -- -- 50 -- 1.00 2.800 0.140 0.730 (18.542) A 8 52 71 80 80 80 80 51-390-318 23-0054 1 -- -- 50 -- 2.00 1.500 0.070 0.730 (18.542) A -- 46 65 80 80 80 80 51-390-317 23-0053 1 -- -- 50 -- 2.00 1.500 0.070 0.730 (18.542) B -- 46 65 80 80 80 80 51-311-311 25-0010 1 -- -- 100 -- 0.25 0.900 1.500 0.793 (20.142) A -- 48 66 80 80 80 70 51-311-308 25-0002 1 -- -- 100 -- 1.00 0.500 0.250 0.793 (20.142) A -- 33 52 80 80 80 70 51-311-309 25-0004 1 -- -- 100 -- 3.00 0.660 0.050 0.793 (20.142) A -- 17 34 68 80 80 70 51-311-310 25-0006 1 -- -- 100 -- 5.00 0.900 0.015 0.793 (20.142) A -- -- 17 57 80 80 70 51-353-344 39-0011 1 -- -- 100 -- 10.0 0.990 0.003 0.760 (19.304) A 9 24 29 40 70 70 70 51-353-345 39-0012 1 -- -- 100 -- 10.0 0.990 0.003 0.760 (19.304) A 9 24 29 40 70 70 70 51-311-314 26-0011 1 -- -- 150 125 0.25 0.300 1.500 0.793 (20.142) A -- 29 47 70 80 80 70 51-390-312 23-0036 1 -- -- 150 -- 0.50 0.500 0.360 0.730 (18.542) A -- 48 66 70 70 70 70 51-390-311 23-0035 1 -- -- 150 -- 0.50 0.500 0.360 0.730 (18.542) B -- 48 66 70 70 70 70 51-353-336 26-0002 1 -- -- 150 125 1.00 0.300 0.250 0.793 (20.142) A -- 11 32 63 80 80 70 51-390-315 23-0047 1 -- -- 150 -- 1.00 0.500 0.140 0.730 (18.542) B -- 32 51 70 70 70 70 51-311-312 26-0005 1 -- -- 150 125 3.00 0.300 0.050 0.793 (20.142) A -- 5 6 47 80 80 70 51-311-408 54-0005 2 -- -- 300 115 1.00 0.300 0.250 0.761 (19.329) A -- 23 43 70 70 70 70 Also available through Spectrum Control's authorized distributors. Transient Suppression Pi Filters Transient Suppressor* Minimum Insertion Loss (dB) Max See Rated Max DCR Min Thd 30 300 Length Pg. 91 Volt. 1 RDC VR* Min Cap I BV* IT* IPP* 1 10 100 for Fig. VDC Amp In (mm) Lgth KHz KHz MHz MHz MHz GHz F Mohms Ohms (VDC) (VDC) (MA) (A) 70 57 70 70 1 5 23 51-570-300 0.50 1.400 0.500 0.600 6.5 7.22/7.98 10 44.7 1.179 (29.947) A 70 Part Number 51-570-301 1 5 1.00 1.400 0.500 0.350 6.5 7.22/7.98 10 44.7 1.179 (29.947) A 3 47 70 70 70 70 51-570-302 1 5 3.00 1.400 0.500 0.060 6.5 7.22/7.98 10 44.7 1.179 (29.947) A -- 23 58 70 70 70 51-570-303 1 5 5.00 1.400 0.500 0.015 6.5 7.22/7.98 10 44.7 1.179 (29.947) A -- 17 48 70 70 70 51-570-304 1 5 10.00 1.400 7.22/7.98 10 44.7 1.179 (29.947) A 16 26 35 40 60 70 51-570-310 1 28 0.50 1.400 30.000 0.600 33.0 36.7/40.6 1 9.4 1.179 (29.947) A 23 57 70 70 70 70 51-570-311 1 28 1.00 1.400 30.000 0.350 33.0 36.7/40.6 1 9.4 1.179 (29.947) A 3 47 70 70 70 70 51-570-312 1 28 3.00 1.400 30.000 0.060 33.0 36.7/40.6 1 9.4 1.179 (29.947) A -- 23 58 70 70 70 51-570-313 1 28 5.00 1.400 30.000 0.015 33.0 36.7/40.6 1 9.4 1.179 (29.947) A -- 17 48 70 70 70 51-570-314 1 28 10.00 1.400 30.000 0.005 33.0 36.7/40.6 1 9.4 1.179 (29.947) A 16 26 35 40 60 70 51-570-320 1 50 0.50 1.400 50.000 0.600 58.0 64.4/71.2 1 5.3 1.179 (29.947) A 23 57 70 70 70 70 51-570-321 1 50 1.00 1.400 50.000 0.350 58.0 64.4/71.2 1 5.3 1.179 (29.947) A 3 47 70 70 70 70 51-570-322 1 50 3.00 1.400 50.000 0.060 58.0 64.4/71.2 1 5.3 1.179 (29.947) A -- 23 58 70 70 70 51-570-323 1 50 5.00 1.400 50.000 0.015 58.0 64.4/71.2 1 5.3 1.179 (29.947) A -- 17 48 70 70 70 51-570-324 1 50 10.00 1.400 50.000 0.005 58.0 64.4/71.2 1 5.3 1.179 (29.947) A 16 26 35 40 60 70 0.500 * Transient Suppression definitions and ratings 94 0.005 6.5 VR = Reverse standoff voltage BV = Breakdown voltage IPP = Max. peak pulse current IT = Test current SPECTRUM CONTROL INC. * 8031 Avonia Rd. * Fairview, PA 16415 * Phone: 814-474-2207 * Fax: 814-474-2208 * Web site: www.spectrumcontrol.com SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 *1566 PRINTER 063-120 v2 12/4/06 9:13 AM Page 31 Hermetically Sealed Threaded Case Filters .375 o T Circuit Thread length: A - 0.187 (4.76) B - 0.312 (7.92) L .200 (5.08) A/B .160 (4.064) Max. o .385 Max. (9.78) .115 Ref. (2.92) 1/4-28 Unf-2A Thd. Figure 1 Dimensions in inches (mm) Note: Max. O.D. is o .416" for Military QPL Filters. .375 o T Circuit Standard Product Part Number SCI-2040-012 MIL No Figure -- 1 Rated Voltage 85C 125C DC AC DC AC 80 -- 50 -- Min Cap I Amp F 2.00 1.400 Minimum Insertion Loss (dB) DCR Max Thd 30 150 300 Max L 1 1 10 100 Ohms In (mm) Lgth KHz KHz KHz MHz MHz MHz GHz 0.126 1.071 (27.203) B 30 55 70 70 70 8 22 SCI-2040-013 -- 1 80 -- 50 -- 3.00 1.400 0.054 1.071 (27.203) B 8 22 28 43 70 70 70 9004-100-2017 -- 1 80 -- 50 -- 15.0 1.400 0.005 1.179 (29.947) A 17 27 34 44 60 70 70 SCI-2140-004 -- 1 150 -- 100 -- 1.00 0.500 0.500 1.070 (27.178) A 4 25 40 70 70 70 70 SCI-2140-006 -- 1 150 -- 100 -- 3.00 0.500 0.054 1.071 (27.203) A 4 19 24 39 70 70 70 SCI-2140-007 -- 1 150 -- 100 -- 10.0 0.500 0.010 1.071 (27.203) A 4 19 24 34 57 70 70 SCI-2340-009 -- 1 300 -- 300 125 0.25 0.150 8.000 1.071 (27.203) B 11 57 70 70 70 70 70 SCI-2340-004 -- 1 300 -- 300 125 1.00 0.150 0.500 1.071 (27.203) A -- 13 29 59 70 70 70 SCI-2340-013 -- 1 300 -- 300 125 3.00 0.150 0.054 1.071 (27.203) B -- 8 14 29 70 70 70 SCI-2340-014 -- 1 300 -- 300 125 10.0 0.150 0.010 1.071 (27.203) B -- 8 14 24 47 70 70 Also available through Spectrum Control's authorized distributors. (See MIL index on page 244-246 for complete MIL part number listing) .375 o T Circuit MIL Qualified Product M15733 MIL Part Number No Figure 1 51-382-609 25-0024 Low Pass Filters .050 (1.27) x .070 (1.78) Slot, both ends Rated Voltage 85C 125C DC AC DC AC -- -- 100 -- Min Cap I Amp F 2.00 0.750 Minimum Insertion Loss (dB) DCR Max Max Thd 30 150 300 L 1 1 10 100 Ohms In (mm) Lgth KHz KHz KHz MHz MHz MHz GHz 0.100 1.179 (29.947) B 10 22 31 80 70 70 55 51-382-603 25-0007 1 -- -- 100 -- 4.00 0.750 0.063 1.345 (34.163) A 10 22 28 43 80 70 70 51-351-604 26-0012 1 -- -- 150 125 2.00 0.250 0.100 1.179 (29.947) A -- 13 21 43 80 70 70 51-351-603 26-0008 1 -- -- 150 125 4.00 0.250 0.063 1.345 (34.163) A -- 11 18 33 80 70 70 Also available through Spectrum Control's authorized distributors. SPECTRUM CONTROL INC. * 8031 Avonia Rd. * Fairview, PA 16415 * Phone: 814-474-2207 * Fax: 814-474-2208 * Web site: www.spectrumcontrol.com SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 95 *1566 PRINTER 063-120 v2 12/4/06 9:13 AM Page 32 Hermetically Sealed Threaded Case Filters .375 o TT Circuit Standard Product See MIL Pg. 93 No for Fig. -- 1 Rated Voltage 85C 125C DC AC DC AC -- -- 50 -- Minimum Insertion Loss (dB) DCR Max Min Max Thd 30 150 300 L Cap I 1 1 10 100 Ohms Amp F In (mm) Lgth KHz KHz KHz MHz MHz MHz GHz 70 70 70 0.25 1.500 12.000 1.241 (31.521) B 70 70 70 70 SCI-2060-013 -- 1 -- -- 50 -- 3.00 1.500 0.081 1.241 (31.521) B -- 33 54 70 70 70 70 SCI-2060-007 -- 1 -- -- 50 -- 10.0 1.500 0.006 1.241 (31.521) A 15 29 35 42 55 70 70 SCI-2060-014 -- 1 -- -- 50 -- 10.0 1.500 0.006 1.241 (31.521) B 15 29 35 42 55 70 70 SCI-2160-011 -- 1 -- -- 100 -- 1.00 1.500 0.750 1.241 (31.521) B 12 52 70 70 70 70 70 SCI-2160-012 -- 1 -- -- 100 -- 2.00 1.500 0.189 1.241 (31.521) B -- 33 56 70 70 70 70 SCI-2160-013 -- 1 -- -- 100 -- 3.00 1.500 0.081 1.241 (31.521) B -- 24 54 70 70 70 70 SCI-2160-014 -- 1 -- -- 100 -- 10.0 1.400 0.006 1.241 (31.521) B 12 25 32 42 55 70 70 SCI-2360-011 -- 1 -- -- 300 125 1.00 0.500 0.750 1.241 (31.521) B -- 48 70 70 70 70 70 SCI-2360-006 -- 1 -- -- 300 125 3.00 0.500 0.080 1.241 (31.521) A -- 12 38 70 70 70 70 SCI-2360-007 -- 1 -- -- 300 125 10.0 0.500 0.006 1.241 (31.521) A 5 18 24 34 55 70 70 SCI-2360-014 -- 1 -- -- 300 125 10.0 0.500 0.006 1.241 (31.521) B 5 18 24 34 55 70 70 Part Number Low Pass Filters SCI-2060-009 96 SPECTRUM CONTROL INC. * 8031 Avonia Rd. * Fairview, PA 16415 * Phone: 814-474-2207 * Fax: 814-474-2208 * Web site: www.spectrumcontrol.com SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 *1566 PRINTER 063-120 v2 12/4/06 9:13 AM Page 33 Hermetically Sealed Threaded Case Filters .690 o C Circuit L .560 Max. (14.22) .250 (6.35) .312 (7.92) o .687 .015 (17.45 .38) L .062 (1.57) x .125 (3.17) Slot, both ends .735 Max. (18.62) .115 .005 (2.92 .127) .250 (6.35) .312 (7.92) Figure 1 Low Pass Filters 5/16-24 Unf-2A Thd. o .687 .015 (17.45 .38) .093 (2.36) o Hole, both ends 5/16-24 Unf-2A Thd. Figure 2 Dimensions in inches (mm) .690 o C Circuit Standard Product MIL No Figure -- 1 Rated Voltage 85C 125C DC AC DC AC 200 -- 150 54-310-001 -- 1 300 -- 300 125 15 54-310-005 -- 2 250 -- 200 125 25 54-310-009 -- 1 450 240 400 240 -- 1 450 240 400 240 Part Number 9932-100-6004 9932-100-6005 Minimum Insertion Loss (dB) 1 30 150 300 1 10 100 KHz KHz KHz MHz MHz MHz GHz 10 29 39 50 60 70 70 DCR Max Ohms 0.005 In 0.702 (mm) (17.831) 0.500 0.005 0.560 (14.224) 6 19 25 36 50 70 70 0.500 0.005 0.750 (19.050) 6 19 25 36 50 70 70 15 0.250 0.005 0.560 (14.224) -- 14 19 30 45 60 70 15 0.250 0.005 0.560 (14.224) -- 14 19 30 50 70 70 Min Cap I Amp F 15 2.600 Max L .690 o C Circuit MIL Qualified Product M15733 MIL Figure Part Number No 1 54-310-039 34-0037 Rated Voltage 85C 125C DC AC DC AC -- -- 275 125 Min Cap I Amp F 15 0.200 DCR Max Ohms 0.005 Max L In 0.575 (mm) (14.605) Minimum Insertion Loss (dB) 1 30 150 300 1 10 100 KHz KHz KHz MHz MHz MHz GHz 5 15 21 31 51 70 70 .690 o C Circuit DSCC 84084 Product 84084 Part Number No Figure -001 1 54-310-042 Rated Voltage 85C 125C DC AC DC AC -- -- 400 230 Min Cap I Amp F 15 0.150 DCR Max Ohms 0.005 Max L In 0.700 (mm) (17.780) Minimum Insertion Loss (dB) 1 30 150 300 1 10 100 KHz KHz KHz MHz MHz MHz GHz -- 10 16 26 40 52 70 Also available through Spectrum Control's authorized distributors. SPECTRUM CONTROL INC. * 8031 Avonia Rd. * Fairview, PA 16415 * Phone: 814-474-2207 * Fax: 814-474-2208 * Web site: www.spectrumcontrol.com SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 97 *1566 PRINTER 063-120 v2 12/4/06 9:13 AM Page 34 Hermetically Sealed Threaded Case Filters .690 o L Circuit .560 Max. (14.22) L .250 (6.35) .312 (7.92) o .687 .015 (17.45 .38) 5/16-24 Unf-2A Thd. Low Pass Filters .062 (1.57) x .125 (3.17) Slot, both ends .115 .005 (2.92 .127) L .735 Max. (18.62) .250 (6.35) .312 (7.92) Figure 1 o .687 .015 (17.45 .38) .093 (2.36) o Hole, both ends 5/16-24 Unf-2A Thd. Figure 2 Dimensions in inches (mm) .690 o L Circuit Standard Product MIL No Figure -- 1 Rated Voltage 85C 125C DC AC DC AC 100 -- 150 -- Min Cap I Amp F 10.0 1.400 Minimum Insertion Loss (dB) DCR Max Max L 1 30 150 300 1 10 100 Ohms CKT In (mm) KHz KHz KHz MHz MHz MHz GHz 0.005 LT 0.905 (22.987) 16 60 24 34 44 70 70 SCI-6120-008 -- 1 150 -- 100 -- 10.0 2.600 0.006 LB 0.959 (24.359) 18 32 39 49 70 70 70 SCI-6120-009 -- 1 150 -- 100 -- 20.0 2.600 0.001 LB 0.905 (22.987) 18 32 39 49 60 70 70 51-320-041 -- 1 250 -- 200 125 10.0 0.500 0.008 LT 0.905 (22.987) 5 19 25 35 50 70 70 51-320-024 -- 1 450 240 400 240 1.00 0.360 0.210 LT 0.905 (22.987) 5 30 38 60 70 70 70 51-320-100 -- 1 450 240 400 240 1.00 0.250 0.210 LT 0.905 (22.987) -- 21 33 55 70 70 70 51-320-026 -- 1 450 240 400 240 3.00 0.360 0.030 LT 0.905 (22.987) 5 19 25 45 70 70 70 51-320-103 -- 1 450 240 400 240 5.00 0.360 0.010 LB 0.905 (22.987) -- 12 18 30 60 70 70 51-322-007 -- 1 450 240 400 240 15.0 0.360 0.007 LB 0.650 (16.510) 5 19 25 35 48 62 70 51-322-015 -- 2 450 240 400 240 25.0 0.360 0.007 LT 0.750 (19.050) 5 17 23 34 48 62 70 51-322-036 -- 2 450 240 400 240 25.0 0.250 0.007 LB 0.750 (19.050) -- 10 16 29 45 60 70 9010-100-0054 -- 1 450 240 300 240 1.00 0.150 0.250 LT 0.905 (22.987) -- 14 32 52 70 70 70 SCI-6320-004 -- 1 300 -- 300 125 1.00 0.400 0.300 LB 0.959 (24.359) 6 24 35 56 70 70 70 Part Number 9010-100-0049 98 Also available through Spectrum Control's authorized distributors. SPECTRUM CONTROL INC. * 8031 Avonia Rd. * Fairview, PA 16415 * Phone: 814-474-2207 * Fax: 814-474-2208 * Web site: www.spectrumcontrol.com SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 *1566 PRINTER 063-120 v2 12/4/06 9:13 AM Page 35 L-C Filter LT Threaded End Hermetically Sealed Threaded Case Filters L-C Filter LB Threaded End M15733 See MIL Pg. 96 Part Number No for Fig. 1 51-320-015 27-0005 Rated Voltage 85C 125C DC AC DC AC -- -- 200 125 Min Cap I Amp F 3.00 0.250 Minimum Insertion Loss (dB) DCR Max Max L 1 30 150 300 1 10 100 Ohms CKT In (mm) KHz KHz KHz MHz MHz MHz GHz 0.033 LT 0.900 (22.860) -- 14 21 80 70 70 39 51-320-017 27-0008 1 -- -- 200 125 5.00 0.250 0.016 LT 0.900 (22.860) -- 13 19 32 69 70 70 51-320-018 27-0009 1 -- -- 200 125 5.00 0.250 0.016 LB 0.900 (22.860) -- 13 19 32 69 70 70 51-323-003 27-0011 1 -- -- 200 125 10.0 0.250 0.005 LT 1.031 (26.187) -- 13 19 30 61 70 70 51-323-004 27-0012 1 -- -- 200 125 10.0 0.250 0.005 LB 1.031 (26.187) -- 13 19 30 61 70 70 51-322-009 27-0014 2 -- -- 200 125 15.0 0.250 0.007 LT 1.763 (44.780) -- 19 25 36 60 70 70 51-322-017 34-0002 2 -- -- 200 125 20.0 0.360 0.050 LB 1.763 (44.780) -- 19 25 35 57 70 70 .690 o L Circuit DSCC 84084 Product See 84084 Pg. 96 Part Number No for Fig. -004 1 51-320-162 Rated Voltage 85C 125C DC AC DC AC -- -- 400 230 Min Cap I Amp F 1.00 0.150 Minimum Insertion Loss (dB) DCR Max Max L 1 30 150 300 1 10 100 Ohms CKT In (mm) KHz KHz KHz MHz MHz MHz GHz 0.150 LT 0.905 (22.987) -- 19 30 60 70 70 46 51-320-163 -005 1 -- -- 400 230 1.00 0.150 0.150 LB 0.905 (22.987) -- 19 30 46 60 70 70 51-320-164 -006 1 -- -- 400 230 3.00 0.150 0.026 LT 0.905 (22.987) -- 11 19 36 60 70 70 51-320-165 -007 1 -- -- 400 230 3.00 0.150 0.026 LB 0.905 (22.987) -- 11 19 36 60 70 70 51-320-166 -008 1 -- -- 400 230 5.00 0.150 0.013 LT 0.905 (22.987) -- 10 16 28 54 70 70 51-320-167 -009 1 -- -- 400 230 5.00 0.150 0.013 LB 0.905 (22.987) -- 10 16 28 54 70 70 51-320-168 -010 1 -- -- 400 230 10.0 0.150 0.008 LT 0.905 (22.987) -- 10 16 25 48 70 70 51-320-169 -011 1 -- -- 400 230 10.0 0.150 0.008 LB 0.905 (22.987) -- 10 16 25 48 70 70 Low Pass Filters (See MIL index on page 244-246 for complete MIL part number listing) .690 o L Circuit MIL Qualified Product Also available through Spectrum Control's authorized distributors. SPECTRUM CONTROL INC. * 8031 Avonia Rd. * Fairview, PA 16415 * Phone: 814-474-2207 * Fax: 814-474-2208 * Web site: www.spectrumcontrol.com SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 99 *1566 PRINTER 063-120 v2 12/4/06 9:13 AM Page 36 Hermetically Sealed Threaded Case Filters .690 o Pi Circuit L .560 Max. (14.22) .250 (6.35) .312 (7.92) L .555 Max. (14.10) o .687 .015 (17.45 .38) .312 (7.92) .115 .005 (2.921 .127) .062 (1.57) x .125 (3.18) Slot, both ends o .687 .015 (17.45 .38) 5/16-24 Unf-2A Thd. .140 Max. (3.56) Figure 1 Low Pass Filters .250 (6.35) .062 (1.57) x .125 (3.18) Slot, both ends 5/16-24 Unf-2A Thd. Figure 2 Dimensions in inches (mm) .690 o Pi Circuit Standard Product MIL No Figure -- 1 Rated Voltage 85C 125C DC AC DC AC 150 -- 100 -- Min Cap I Amp F 1.00 2.800 DCR Max Ohms 0.210 In 1.195 (mm) (30.353) SCI-6130-009 -- 1 150 -- 100 20.0 5.200 0.001 1.195 (30.353) 23 31 35 35 70 70 70 51-321-317 -- 1 450 240 400 *240 1.00 0.720 0.400 1.195 (30.353) -- 53 70 70 70 70 70 51-321-318 -- 1 450 240 400 *240 3.00 0.720 0.030 1.195 (30.353) -- 31 51 70 70 70 70 51-321-319 -- 1 450 240 400 *240 5.00 0.720 0.020 1.195 (30.353) -- 11 30 65 70 70 70 Part Number 51-321-322 -- Max L Minimum Insertion Loss (dB) 1 30 150 300 1 10 100 KHz KHz KHz MHz MHz MHz GHz 35 69 70 70 70 70 70 * 0-60 Hz (See MIL index on page 244-246 for complete MIL part number listing) .690 o Pi Circuit MIL Qualified Product M15733 MIL Figure Part Number No 1 51-321-312 27-0004 Rated Voltage 85C 125C DC AC DC AC -- -- 200 125 Min Cap I Amp F 1.00 0.500 DCR Max Ohms 0.250 In 1.195 (mm) (30.353) Max L Minimum Insertion Loss (dB) 1 30 150 300 1 10 100 KHz KHz KHz MHz MHz MHz GHz -- 47 65 80 80 70 70 51-323-313 27-0003 1 -- -- 200 125 1.00 0.500 0.270 1.031 (26.187) -- 43 61 80 80 70 70 51-321-313 27-0010 1 -- -- 200 125 5.00 0.500 0.024 1.195 (30.353) -- 10 28 64 80 70 70 51-321-314 27-0013 1 -- -- 200 125 10.0 0.500 0.008 1.195 (30.353) -- 16 18 48 80 70 70 51-321-329 34-0005 1 -- -- 200 125 10.0 0.500 0.075 1.195 (30.353) -- 16 18 48 80 70 70 .690 o Pi Circuit DSCC 84084 Product 100 Min Cap I Amp F 1.00 0.200 DCR Max Ohms 0.150 In 1.200 (mm) (30.480) 2 -- -- 400 230 3.00 0.200 0.026 1.200 (30.480) -- -- 30 60 80 80 80 2 -- -- 400 230 5.00 0.200 0.013 1.200 (30.480) -- -- 12 50 80 80 80 2 -- -- 400 230 10.0 0.200 0.008 1.200 (30.480) -- -- -- 30 80 80 80 51-321-398 Figure 2 51-321-399 -014 51-321-400 -015 51-321-401 -016 Part Number Rated Voltage 85C 125C DC AC DC AC -- -- 400 230 84084 No -013 Max L Minimum Insertion Loss (dB) 1 30 150 300 1 10 100 KHz KHz KHz MHz MHz MHz GHz -- 27 46 74 80 80 80 Also available through Spectrum Control's authorized distributors. SPECTRUM CONTROL INC. * 8031 Avonia Rd. * Fairview, PA 16415 * Phone: 814-474-2207 * Fax: 814-474-2208 * Web site: www.spectrumcontrol.com SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 *1566 PRINTER 063-120 v2 12/4/06 9:13 AM Page 37 Hermetically Sealed Threaded Case Filters .690 o T Circuit .250 (6.35) .560 Max. (14.22) L .312 (7.92) o .687 .015 (17.45 0.38) .115 .005 (2.92 .127) 5/16-24 Unf-2A Thd. .591 Max. (15.01) L .250 (6.35) .312 (7.92) Figure 1 Low Pass Filters .062 (1.57) x .125 (3.18) Slot, both ends o .680 Max. (17.272) .125 Ref. (3.175) 5/16-24 Unf-2A Thd. .062 (1.57) x .125 (3.18) Slot, both ends Figure 2 Dimensions in inches (mm) .690 o T Circuit Standard Product MIL No Figure -- 1 Rated Voltage 85C 125C DC AC DC AC 150 -- 100 -- Min Cap I Amp F 1.00 2.600 DCR Max Ohms 0.600 In 1.195 (mm) (30.353) SCI-6140-006 -- 1 150 -- 100 -- 3.00 2.600 0.100 1.195 (30.353) 21 35 46 70 70 70 70 SCI-6140-007 -- 1 150 -- 100 -- 5.00 2.600 0.060 1.195 (30.353) 21 34 41 58 70 70 70 SCI-6140-009 -- 1 150 -- 100 -- 20.0 2.600 0.002 1.195 (30.353) 21 35 41 50 60 70 70 51-321-649 -- 1 250 125 200 125 2.00 0.360 0.090 1.195 (30.353) -- 24 38 65 70 70 70 51-321-610 -- 1 450 240 400 240 1.00 0.360 0.600 1.195 (30.353) 7 43 60 70 70 70 70 Part Number SCI-6140-004 Max L (See MIL index on pags 244-246 for complete MIL part number listing) .690 o T Circuit MIL Qualified Product M15733 MIL Figure Part Number No 1 51-321-607 27-0017 Minimum Insertion Loss (dB) 1 30 150 300 1 10 100 KHz KHz KHz MHz MHz MHz GHz 23 54 70 70 70 70 70 Rated Voltage 85C 125C DC AC DC AC -- -- 200 125 Min Cap I Amp F 1.50 0.250 DCR Max Ohms 0.133 In 1.195 (mm) (30.353) Max L Minimum Insertion Loss (dB) 1 30 150 300 1 10 100 KHz KHz KHz MHz MHz MHz GHz -- 19 32 62 70 70 70 51-321-608 27-0018 1 -- -- 200 125 4.00 0.250 0.025 1.195 (30.353) -- 14 21 36 70 70 70 51-321-670 54-0017 2 -- -- 300 115 10.0 0.500 0.006 1.177 (29.896) 5 20 23 35 60 70 60 Also available through Spectrum Control's authorized distributors. SPECTRUM CONTROL INC. * 8031 Avonia Rd. * Fairview, PA 16415 * Phone: 814-474-2207 * Fax: 814-474-2208 * Web site: www.spectrumcontrol.com SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 101 *1566 PRINTER 063-120 v2 12/4/06 9:13 AM Page 38 Value-Added Low Pass Filter Assemblies Spectrum Control's value-added low pass filters provide flexible solutions to meet your unique design challenges. Our manufacturing process allows you to add connectors, modify terminations or add wire harnesses without adding much cost or drastically increasing lead times. For custom requirements and exceptional needs, contact our design/manufacturing team. Features I I Build-to-order low pass filters from Spectrum Control, Inc. Custom low pass filter assemblies Benefits Low Pass Filters I 102 I I I I Incorporates specific terminations, connectors or wire harnesses to accommodate your application Lowers the cost of acquisition and assembly Reduces production operations and lead times Allows you to stream line your bill of materials Reduces inventory/production costs SPECTRUM CONTROL INC. * 8031 Avonia Rd. * Fairview, PA 16415 * Phone: 814-474-2207 * Fax: 814-474-2208 * Web site: www.spectrumcontrol.com SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 *1566 PRINTER 063-120 v2 12/4/06 9:13 AM Page 39 Filtered Arrays CERTIFIED SPECTRUM CONTROL INC. * 8031 Avonia Rd. * Fairview, PA 16415 * Phone: 814-474-2207 * Fax: 814-474-2208 * Web site: www.spectrumcontrol.com SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 103 *1566 PRINTER 063-120 v2 12/4/06 9:13 AM Page 40 Filtered Array Selection Guide Easy Mate(R) Filter Plates I Reduce installation time and overall cost I Eliminate mounting hardware and prepwork I Flexibility in mounting density, 0.100" and 2mm centers I Multiple finger ground contacts provide excellent EMI filtering from 5 MHz to 18 GHz I Maximize real estate on PCB I Ideal for isolation of electronic compartments CERTIFIED Pages The Easy Mate(R) & Easy Mate(R) Jr. filter plate family offer one of the most innovative EMI solutions in the electronic arena. The Easy Mate(R) concept of multiple finger ground contacts provides the lowest path of impedance for noise to ground. The Easy Mate(R) family reduces your total installed cost by eliminating the need for prep work and hardware. Easy Mate(R) Filter Plates . . . . . . . . . 106-109 Easy Mate(R) Jr. Filter Plates . . . . . . . . . 110-111 Bolt-in style filter plates provide an excellent method for electronic system interface and EMI filtering of signal and power lines. Bolt-in filter plates are available in a variety of plate sizes and up to 74 lines per plate in Hi-Density, and 60 pins per plate in standard density configuration. Bolt-in Filter Plates . . . . . . . . . 112-115 Bolt-in Filter Plates I Eliminate the need to mount filters into bulkheads I Excellent filtering from 5 MHz to 1 GHz, outperforms surface mount filters over 50 MHz I Mixed capacitance values and circuits I Maximize real estate on PCB I Total installed cost savings compared to discrete filters I Ideal for isolation of electronic compartments Custom Filter Plates & Terminal Blocks I Custom assemblies with varying cable lengths and terminations I Integrate with other functional devices to supply a complete turnkey assembly I Perform EMC evaluations on complete equipment and identify proper placement of EMI/RFI filtering components I Custom High Reliability assemblies Spectrum Control offers a number of value added features designed to specifically meet your manufacturing needs. Spectrum Control can build and provide product that meets the most stringent High Reliability specifications. Shrouded Latch Filter Plates . . . . . . . . . 116-117 Custom Filter Plates . . . . . . . . . 118-119 Filter Selection . . . . . . . . . . 120 Filter Plate Design Inquiry Form. . . . . . . . . . . . 121 Custom Terminal Blocks. . . . . . . . . . 127 Terminal Block Design Inquiry Form. . . . . . . . . . . . 127 Barrier Strip Filtered Terminal Blocks I Rugged construction provides protection I I I I to filtering element 2 to 6 terminals in a single row available Cost effective solution for backplane EMI leakage problems 20 Amp rating UL recognized & CSA approved for DC voltages The Barrier style terminal block is designed to provide excellent EMI filtering for both DC power and signal lines. These terminal blocks are available in sizes from 2 through 6 positions. Applications include power supplies in telecommunications equipment, metering, industrial controls, instrumentation and heavy equipment controls. Barrier Strip Filtered Terminal Blocks . . . . . . 122-123 PCB Mount Filtered Terminal Blocks I Fast and easy PCB installation and maintenance I Cost effective solution for industrial interconnection EMI filtering problems I Available with metric (5mm) or U.S. (.200") pin spacing I 2 to 12 terminals available 104 The PCB terminal block is designed to provide excellent EMI filtering of low voltage DC power and signal/control lines. These terminal blocks use a screw clamp system with wire protector, which provides for quick and simple installation. Applications include power supplies in telecommunications equipment, metering, industrial controls, instrumentation and heavy equipment controls. PCB Mount Filtered Terminal Blocks . . . . . . 125-126 SPECTRUM CONTROL INC. * 8031 Avonia Rd. * Fairview, PA 16415 * Phone: 814-474-2207 * Fax: 814-474-2208 * Web site: www.spectrumcontrol.com SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 *1566 PRINTER 063-120 v2 12/4/06 9:13 AM Page 41 Filter Plates Easy Mate(R) Plates Bolt-in Plates Custom Plate Solutions Filter Plate Advantages I I I I I I I I Provide an EMI filtered signal line between electronic system modules Reduce cost . . . economical method to meet EMC requirements Reduce labor . . . eliminate need to assemble filters into a bulkhead Outperform surface mount EMI filters at frequencies above 50 MHz Reduce risk of damage to filter elements due to thermal shock and installation Improve reliability . . . every filter plate is 100% tested for key parameters Maximize real estate on PCB Mixed schematics in a single filter plate package SPECTRUM CONTROL INC. * 8031 Avonia Rd. * Fairview, PA 16415 * Phone: 814-474-2207 * Fax: 814-474-2208 * Web site: www.spectrumcontrol.com SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 Filtered Arrays Eliminating EMI/RFI interference has become a stringently enforced matter and needs to be considered at the early stages of design for all electronic systems. Both internal and external interference sources have a major impact on the successful EMC performance of a new system. Shielding alone is unsatisfactory in shunting unwanted harmonics, conducted or radiated, on power/ control lines that run through compartments of an electronic enclosure. This is particularly applicable in systems operating at frequencies above 50 MHz. Isolation and the incorporation of feed-thru filters (Filter Plates) to facilitate entering or leaving sensitive compartments in an assembly are excellent methods to bring electronic interdependent functions/systems into compliance. Filter Plates allow a means of interfacing voltage and/or data (controlling instructions) to distant areas of a system without compromising its performance. Filter Plates provide excellent isolation from 5 MHz to 18 GHz and beyond, reduce the labor involved for installation, as well as reduce the risk of damaging filter elements during installation. Connecting to these Filter Plates is easily accomplished through several methods, either ribbon style connectors, harnesses, hard wiring or directly soldering leads at a 90 angle to the printed circuit board. The drawings on pages 107, 113 and 117 illustrate how filter plates are incorporated into an electronic system. 105 *1566 PRINTER 063-120 v2 12/4/06 9:13 AM Page 42 Easy Mate(R) Filter Plates Easy Mate(R) Advantages Filtered Arrays Spectrum Control developed a new EMI/RFI filter plate, Easy Mate (R), which simplifies installation and eliminates the need for mounting hardware. The Easy Mate (R), patented, is designed to "snap" into the chassis of electronic systems, reducing the labor required to complete a plate installation. The drawing on page 105 shows the Easy Mate (R) design. These plates are available in two lengths and in both standard density centers (.100") and hi-density centers (2mm). Standard density Easy Mate (R) plates offer up to 26 lines per plate in a double row configuration, while hi-density plates offer up to 32 lines. Custom sizes for Easy Mate (R) plates are available. Ordering Information Example: Reduces installation time and overall cost I Eliminates mounting hardware and prepwork I Flexibility for 1 or 2 rows and standard density centers (.100") or hi-density centers (2mm) I Improves overall quality and reliability I Multiple dimpled finger ground contacts provides excellent long term EMI filtering from 5 MHz to 18 GHz I Outperforms surface mount devices I Maximize real estate on PCB I Mixed capacitance values and schematics I Ideal for isolation of electronic compartments I Available in RoHS compliant versions 52-898-206-BA2 The part number shown represents an Easy Mate (R) filter plate with 2 rows, 6 filters per row. Filters are C style with a capacitance value of 100pF. The plate length is 1.092", and the leads are bent 90 to the right side. 52 -** 898 Filter Plates 898 Easy Mate(R) Standard Density 960 Easy Mate(R) Hi-density * 2 06 - No. of Filters No. of Rows 1 = 1 row 2 = 2 rows * Maximum capacitance up to 4000pF C style filter 106 I B Filter Designation Number of Lines per Row If less than 10, use a 0 (zero) first. **Replace "-" with "F" for RoHS complaint version A - T from table on page 118. *** A 2 Plate Length Lead Configuration A - 1.092 (27.74mm) B - 1.812 (46.02mm) 0 - Straight 1 - 90 (left) 2 - 90 (right) 3 - 90 (both) *** To request selective line filtering, a mechanical configuration or material specification not shown in this catalog, please complete and forward the design inquiry form on page 121. We will review your request and provide you with a part number. SPECTRUM CONTROL INC. * 8031 Avonia Rd. * Fairview, PA 16415 * Phone: 814-474-2207 * Fax: 814-474-2208 * Web site: www.spectrumcontrol.com SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 *1566 PRINTER 063-120 v2 12/4/06 9:13 AM Page 43 Mechanical Specifications Base Plate Material ............................ Beryllium copper Patented Filtered Arrays Easy Mate(R) Filter Plates Base Plate Thickness .......................... .012 inches (0.30mm) Plating .............................. Tin, Soldering to Filter Terminals I I I I I I I Use a temperature controlled soldering iron with tip temperature of 525 10 F (275 5 C). Use an SN 63 RMA flux core solder. Make mechanical wire connection. Use heat sink next to filter body where possible. Clean soldering iron tip. Clip end of solder--remove 0.5" (12.7mm) to expose flux for soldering. Apply soldering iron to wire/flag junction at wetted solder tip region of iron (Wetted Bridge Method). Immediately apply solder. Dwell time for soldering iron tip on product should be 3-5 seconds maximum. (For non-RoHS versions only) RoHS version will be silver Lead Material ................. Copper alloy Lead Plating .................... Gold plate Lead Diameter ............... o .025" (.64mm) for 0.100" centers (2.54mm) o .020 (.51mm) for 0.079" centers (2.00mm) Current Rating ................ 5 Amps for .025" o (.64mm) 3 Amps for .020" o (.51mm) SPECTRUM CONTROL INC. * 8031 Avonia Rd. * Fairview, PA 16415 * Phone: 814-474-2207 * Fax: 814-474-2208 * Web site: www.spectrumcontrol.com SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 107 *1566 PRINTER 063-120 v2 Easy 12/4/06 Mate(R) 9:13 AM Page 44 No. of Plate filtered lines length (A) per row Filter Plates Standard Density Centers .100" 1.092 (27.74) Dimensions: inches and (mm) Lead Spacing: .100" (2.54 mm) Single Row A B C .100 (2.54) .622 (15.80) .150 (3.81) .335 (8.51) Pin 1 .118 (3.00) Straight (0) 90 Both (3) .374 (9.50) .315 (8.00) MAX. .315 (8.00) MAX. .675 (17.15) .540 (13.71) 1.102 (28.00) .315 (8.00) MAX. .374 (9.50) Pin 1 .481 (12.22) (0.00) (2.54) (5.08) (7.62) (10.16) (12.70) (15.24) (17.78) (20.32) (22.86) (25.40) (27.94) (30.48) 0.906 0.806 0.806 0.706 0.706 0.606 0.606 0.506 0.506 0.406 0.406 0.306 0.306 (23.01) (20.47) (20.47) (17.93) (17.93) (15.39) (15.39) (12.85) (12.85) (10.31) (10.31) (7.77) (7.77) .012 (.31) .100" Centers .312 (7.93) .062 (1.58) Board 90 Both (3) .315 (8.00) MAX. .540 (13.71) .118 (3.00) .315 (8.00) MAX. .381 (9.68) Hi-Density 90 Right (2) .394 (10.00) .406 (10.32) .012 (.31) 2mm Centers .294 .675 (7.47) (17.15) .875 (22.22) .306 (7.78) .675 (17.17) .875 (22.25) .118 (3.00) .474 (12.04).374 (9.50) .474 (12.05) .374 (9.51) .640 (16.26) .057 (1.45) Chassis .150 (3.81) .118 (3.00) 1.02 (25.93) Board mounted to .312 standoffs .453 (11.51) .186 (4.73) .374 (9.51) .118 (3.00) .474 .374 (12.04) (9.50) .315 (8.00) MAX. .294 (7.47) .640 (16.26) .265 (6.74) .394 (10.00) .950 (24.13) Patented Refers to lead configuration for part number/ordering information 108 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.1 1.2 .622 (15.80) .335 (8.51) .150 (3.81) .474 (12.04) .374 (9.50) 1 2 3 4 5 6 7 8 9 10 11 12 13 .265 (6.74) .100 (2.54) 90 Left (1) (12.60) (12.60) (10.06) (10.06) (7.52) (7.52) .186 (4.73) .100 (2.54) 1.102 (28.00) 0.496 0.496 0.396 0.396 0.296 0.296 Standard Density A B C .315 (8.00) MAX. 0 (0.00) 0.1 (2.54) 0.2 (5.08) 0.3 (7.62) 0.4 (10.16) 0.5 (12.70) Board mounted to .312 standoffs .294 (7.47) .850 (21.60) .921 (23.40) Straight (0) 1 2 3 4 5 6 Typical Mounting Applications .315 (8.00) MAX. .381 (9.68) Double Row C .118 (3.00) 90 Right (2) .374 (9.50) B .294 (7.47) .118 (3.00) 90 Left (1) Filtered Arrays 1.812 (46.02) .150 (3.81) .118 (3.00) 52-898-XXX-XXX .057 (1.45) Chassis .312 (7.93) .062 (1.58) Board .675 (17.17) .833 (21.16) .306 (7.78) .385 (9.78) SPECTRUM CONTROL INC. * 8031 Avonia Rd. * Fairview, PA 16415 * Phone: 814-474-2207 * Fax: 814-474-2208 * Web site: www.spectrumcontrol.com SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 *1566 PRINTER 063-120 v2 Easy 12/4/06 Mate(R) 9:13 AM Page 45 No. of Plate filtered lines length (A) per row Filter Plates Hi-Density Centers 2mm 1.092 (27.74) Dimensions: inches and (mm) Lead Spacing: .079" (2.00 mm) Single Row A B C .079 (2.00) .622 (15.80) .150 (3.81) .335 (8.51) Pin 1 .150 (3.81) .118 (3.00) .118 (3.00) Straight (0) 1.812 (46.02) 90 Both (3) .374 (9.50) .315 (8.00) MAX. .315 (8.00) MAX. .675 (17.15) .540 (13.71) 1.102 (28.00) .294 (7.47) .118 (3.00) .118 (3.00) 90 Left (1) 52-960-XXX-XXX B C 2 3 4 5 6 7 0.079 0.157 0.236 0.315 0.394 0.472 (2.00) (4.00) (6.00) (8.00) (10.00) (12.00) 0.463 0.463 0.385 0.385 0.306 0.306 (11.77) (11.77) (9.77) (9.77) (7.77) (7.77) 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 0.079 0.157 0.236 0.315 0.394 0.472 0.551 0.630 0.709 0.787 0.866 0.945 1.024 1.102 1.181 (2.00) (4.00) (6.00) (8.00) (10.00) (12.00) (14.00) (16.00) (18.00) (20.00) (22.00) (24.00) (26.00) (28.00) (30.00) 0.866 0.787 0.787 0.709 0.709 0.630 0.630 0.551 0.551 0.472 0.472 0.394 0.394 0.315 0.315 (22.00) (20.00) (20.00) (18.00) (18.00) (16.00) (16.00) (14.00) (14.00) (12.00) (12.00) (10.00) (10.00) (8.00) (8.00) 90 Right (2) Easy Mate(R) Chassis Cut-out Design .315 (8.00) MAX. .315 (8.00) MAX. .381 (9.68) Patent Pending .294 (7.47) .850 (21.60) .921 (23.40) Double Row .374 (9.50) A B A B C .057 .002 (1.45 .05) .010 (.25) .470 (11.95) .670 (17.04) .079 (2.00) .079 (2.00) .622 (15.80) .335 (8.51) .150 (3.81) Pin 1 Straight (0) Housing thickness beyond output customer's option Casting Filtered Arrays .374 (9.50) .150 (3.81) .118 (3.00) 90 Both (3) .118 (3.00) A B .315 (8.00) MAX. (9.50) 1.102 (28.00) 90 Left (1) .540 (13.71) .118 (3.00) .474 (12.04) .374 (9.50) .481 (12.22) .315 (8.00) MAX. .453 (11.51).374 .315 (8.00) MAX. .381 (9.68) 1.02 (25.93) .010 (.25) .294 .675 (7.47) (17.15) .833 (21.60) 90 Right (2) .470 (11.95) .373 (9.47) .118 (3.00) .453 .374 (11.51) (9.50) .315 (8.00) MAX. .294 (7.47) .373 (9.47) Plate Length A B 1.092 (27.74) 1.812 (46.02) 1.117 (28.41) 1.837 (46.71) 0.816 (20.75) 1.535 (39.04) .930 (23.62) Patented Refers to lead configuration for part number/ordering information SPECTRUM CONTROL INC. * 8031 Avonia Rd. * Fairview, PA 16415 * Phone: 814-474-2207 * Fax: 814-474-2208 * Web site: www.spectrumcontrol.com SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 109 *1566 PRINTER 063-120 v2 12/4/06 9:13 AM Page 46 Filtered Arrays Easy Mate(R) Jr. Filter Plates Spectrum Control has expanded its popular Easy Mate(R) family by adding two more package sizes. These new sizes are lower profile and facilitate installation of feedthru filters into small hardware applications such as PCS linear power amplifiers and RF transmitters. The Easy Mate(R) Jr. is available in two plate lengths .990" and 1.240" and in standard (.100") and high density centers (2mm). Mechanical Specifications Easy Mate(R) Jr. Advantages Base Plate Material ..........................Beryllium copper I Reduces installation time and overall cost I Eliminates mounting hardware and prepwork I Increase flexibility with standard density centers (.100") or high density centers (2mm) Plating .............................Tin, I Improves overall quality and reliability Lead Material ................Copper alloy I Multiple finger ground contacts provide excellent EMI filtering from 5 MHz to 18 GHz Lead Plating ..................Gold plate I Outperforms surface mount devices Lead Diameter..............o .025" (.64mm) I Maximize real estate on PCB I Mixed capacitance values and schematics I Ideal for isolation of electronic compartments I Available in RoHS compliant versions Base Plate Thickness .........................010 inches (.25mm) RoHS version will be silver for 0.100" centers (2.54mm) .......................................o .020 (.51mm) for 0.079" centers (2.00mm) Current Rating ..............5 Amps for .025" o (.64mm) 3 Amps for .020" o (.51mm) Ordering Information Example: 52-978-106-BA2 The part number shown represents an Easy Mate (R) Jr. filter plate with 6 filters. Filters are C style with a capacitance value of 100pF. The plate length is .990", and the leads are bent 90 to the right side. 52 -** 978 Filter Plates 1 978 Easy Mate(R) Jr. No. of Standard Rows Density 1 = 1 row 979 Easy Mate(R) Jr. Hi-density * * Maximum capacitance up to 4000pF C style filter 110 06 - No. of Filters B Filter Designation Number of Lines per Row If less than 10, use a 0 (zero) first. **Replace "-" with "F" for RoHS complaint version A - T from table on page 118. *** A 2 Plate Length Lead Configuration A - .990 (25.15mm) B - 1.240 (31.49mm) 0 - Straight 1 - 90 (left) 2 - 90 (right) 3 - 90 (both) *** To request selective line filtering, a mechanical configuration or material specification not shown in this catalog, please complete and forward the design inquiry form on page 121. We will review your request and provide you with a part number. SPECTRUM CONTROL INC. * 8031 Avonia Rd. * Fairview, PA 16415 * Phone: 814-474-2207 * Fax: 814-474-2208 * Web site: www.spectrumcontrol.com SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 *1566 PRINTER 063-120 v2 12/4/06 9:13 AM Page 47 Standard Density Centers .100" (D) Easy Mate(R) Jr. Filter Plates A B D .090 (2.29) .180 .260 (4.57) (6.60) 1.24 (31.49) .090 (2.29) Straight (0) Double Bends (3) .118 (3.00) .284 (7.21) .315 (8.00) MAX. .118 (3.00) .420 (10.67) 90 Left (1) .284 (7.21) 90 Right (2) (2.54) (5.08) (7.62) (10.16) (12.70) (15.24) 0.395 0.395 0.295 0.295 0.195 0.195 (10.03) (10.03) (7.49) (7.49) (4.95) (4.95) 2 3 4 5 6 7 8 9 10 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 (2.54) (5.08) (7.62) (10.16) (12.70) (15.24) (17.78) (20.32) (22.86) 0.570 0.470 0.470 0.370 0.370 0.270 0.270 0.170 0.170 (14.48) (11.94) (11.94) (9.40) (9.40) (6.86) (6.86) (4.32) (4.32) .284 (7.21) 0.417 0.417 0.338 0.338 0.259 0.259 (10.58) (10.58) (8.58) (8.58) (6.58) (6.58) 2 3 4 5 6 7 8 9 10 0.079 0.157 0.236 0.315 0.394 0.472 0.551 0.630 0.709 (2.00) (4.00) (6.00) (8.00) (10.00) (12.00) (14.00) (16.00) (18.00) 0.580 0.502 0.502 0.423 0.423 0.344 0.344 0.266 0.266 (14.75) (12.75) (12.75) (10.75) (10.75) (8.75) (8.75) (6.75) (6.75) .990 (25.15) Refers to lead configuration for part number/ordering information 1.24 (31.49) Typical Mounting Application .675 (17.16) .010 (.25) .296 (7.52) .090 (2.29) .284 (7.22) .265 (6.74) C (2.00) (4.00) (6.00) (8.00) (10.00) (12.00) .725 (18.41) .798 (20.27) B 0.079 0.157 0.236 0.315 0.394 0.472 .296 (7.52) .379 (9.63) 52-979-XXX-XXX 2 3 4 5 6 7 .118 (3.00) .315 (8.00) MAX. .315 (8.00) MAX. 0.1 0.2 0.3 0.4 0.5 0.6 No. of Plate filtered lines length (A) per row .296 (7.52) .675 (17.15) .118 (3.00) C High Density Centers 2mm (D) .315 (8.00) MAX. .850 (21.59) B Easy Mate(R) Jr. Chassis Cut-out Design Patented A B .008 (.20) .062 (1.58) Board .640 (16.27) .313 (7.96) .046 .002 (1.17 .05) .173 (4.40) .312 (7.93) 2 draft per side Casting R.062 (4X) (1.58) .057 (1.45) Chassis Filtered Arrays C 52-978-XXX-XXX 2 3 4 5 6 7 .990 (25.15) Dimensions: inches and (mm) Single Row No. of Plate filtered lines length (A) per row .008 (.20) R.015 MAX. (.38) A B >.057 (1.45) Optional thickness by customer .173 (4.40) .057 Thick R.010 MAX. (.25) Plate Length A B .990 (25.15) 1.24 (31.49) 1.015 (25.78) 1.265 (32.13) 0.834 (21.18) 1.084 (27.53) SPECTRUM CONTROL INC. * 8031 Avonia Rd. * Fairview, PA 16415 * Phone: 814-474-2207 * Fax: 814-474-2208 * Web site: www.spectrumcontrol.com SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 111 *1566 PRINTER 063-120 v2 12/4/06 9:13 AM Page 48 Bolt-in Style Filter Plates The Bolt-in style plate provides an excellent method for electronic system interface and EMI filtering. Bolt-in filter plates are available in a variety of plate sizes and up to 74 lines per plate in hi-density (2mm) and 60 pins per plate in standard density (.100"). On the larger plate sizes, Spectrum ensures structural integrity through a unique, patent pending, coining process. The drawing on page 111 shows an electronic system utilizing Bolt-in style filter plates. Bolt-in Filter Plate Advantages Filtered Arrays Ordering Information Example: Eliminates the need to assemble filters into a bulkhead I Excellent filtering from 5 MHz to 1 GHz I Total cost savings vs. customer installed discrete filter elements I Ideal for isolation of electronic compartments to suppress EMI I Outperforms surface mount filters over 50 MHz I Improved reliability I Mixed capacitance values and schematics I Maximize real estate on PCB I Available in RoHS compliant versions 52-970-208-BB2 The part number shown represents a Bolt-in style filter plate with 2 rows, 8 filters per row. Filters are C style with a capacitance value of 100pF. The plate length is 1.560", and the leads are bent 90 to the right side. 52 -** 970 Filter Plates 970 Bolt-in Standard Density 971 Bolt-in Hi-density * 2 08 - No. of Filters No. of Rows 1 = 1 row 2 = 2 rows * Maximum capacitance up to 4000pF C style filter 112 I B Filter Designation Number of Lines per Row If less than 10, use a 0 (zero) first. **Replace "-" with "F" for RoHS complaint version A - T from table on page 118. *** B 2 Plate Length Lead Configuration A - 1.060 (26.92mm) B - 1.560 (39.62mm) C - 2.560 (65.02mm) D - 3.560 (90.42mm) 0 - Straight 1 - 90 (left) 2 - 90 (right) 3 - 90 (both) *** To request selective line filtering, a mechanical configuration or material specification not shown in this catalog, please complete and forward the design inquiry form on page 121. We will review your request and provide you with a part number. SPECTRUM CONTROL INC. * 8031 Avonia Rd. * Fairview, PA 16415 * Phone: 814-474-2207 * Fax: 814-474-2208 * Web site: www.spectrumcontrol.com SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 *1566 PRINTER 063-120 v2 12/4/06 9:13 AM Page 49 Bolt-in Style Filter Plates Mechanical Specifications Filtered Arrays Coining feature Patented Base Plate Material .......................... Brass UNS C26000/C27000 Base Plate Thickness ........................ .020 inches (.51mm) Plating ............................ Tin, RoHS version will be silver Lead Material ............... Copper alloy Lead Plating .................. Gold plate Lead Diameter ............. o .025" (.64mm) for 0.100" centers (2.54mm) ....................................... o .020 (.51mm) for 0.079" centers (2.00mm) Current Rating .............. 5 Amps for .025" (.64mm) o 3 Amps for .020" (.51mm) o SPECTRUM CONTROL INC. * 8031 Avonia Rd. * Fairview, PA 16415 * Phone: 814-474-2207 * Fax: 814-474-2208 * Web site: www.spectrumcontrol.com SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 113 *1566 PRINTER 063-120 v2 12/4/06 9:13 AM Page 50 Bolt-in Style Filter Plates No. of Plate filtered lines length (A) per row Standard Density Centers .100" (0.00) (2.54) (5.08) (7.62) (10.16) 0.53 (13.46) 0.43 (10.92) 0.43 (10.92) 0.33 (8.38) 0.33 (8.38) 1.560 * (39.62) 1 2 3 4 5 6 7 8 9 10 0.0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 (0.00) (2.54) (5.08) (7.62) (10.16) (12.70) (15.24) (17.78) (20.32) (22.86) 0.73 0.73 0.63 0.63 0.53 0.53 0.43 0.43 0.33 0.33 (18.54) (18.54) (16.00) (16.00) (13.46) (13.46) (10.92) (10.92) (8.38) (8.38) 2.560 (65.02) 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 1.9 (10.16) (12.70) (15.24) (17.78) (20.32) (22.86) (25.40) (27.94) (30.48) (33.02) (35.56) (38.10) (40.64) (43.18) (45.72) (48.26) 1.03 1.03 0.93 0.93 0.83 0.83 0.73 0.73 0.63 0.63 0.53 0.53 0.43 0.43 0.33 0.33 (26.16) (26.16) (23.62) (23.62) (21.08) (21.08) (18.54) (18.54) (16.00) (16.00) (13.46) (13.46) (10.92) (10.92) (8.38) (8.38) 3.560 (90.42) 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 1.2 1.3 1.4 1.5 1.6 1.7 1.8 1.9 2.0 2.1 2.2 2.3 2.4 2.5 2.6 2.7 2.8 2.9 (30.48) (33.02) (35.56) (38.10) (40.64) (43.18) (45.72) (48.26) (50.80) (53.34) (55.88) (58.42) (60.96) (63.50) (66.04) (68.58) (71.12) (73.66) 1.13 1.13 1.03 1.03 0.93 0.93 0.83 0.83 0.73 0.73 0.63 0.63 0.53 0.53 0.43 0.43 0.33 0.33 (27.70) (27.70) (26.16) (26.16) (23.62) (23.62) (21.08) (21.08) (18.54) (18.54) (16.00) (16.00) (13.46) (13.46) (10.92) (10.92) (8.38) (8.38) A A-.200 B .250 (6.35) .500 (12.70) O .120 x2 Pin 1 .100 (2.54) C Straight (0) .020 (.51) .300 (7.62) .020 (.51) 1.102 (28.00) 90 Left (1) .020 (.51) 90 Both (3) .300 (7.62) .315 (8.00) MAX. .315 (8.00) MAX. .538 (13.71) .020 (.51) .290 (7.37) .675 (17.15) (.51) .300 (7.62) .300 (7.62) .315 (8.00) MAX. .020 .290 (.51) (7.37) .850 (21.60) .315 (8.00) MAX. .374 (9.50) Filtered Arrays .020 (.51) .385 (9.78) .921 (23.40) Double Row .100 (2.54) .500 (12.70) .100 (2.54) .100 (2.54) .250 (6.35) O .120 x2 .100 (2.54) C .020 (.51) .200 (5.08) .315 (8.00) MAX. .538 .020 (.51) (13.71) 1.102 (28.00) 90 Both (3) .020 (.51) .200 (5.08) .315 (8.00) MAX. .675 (17.15) .020 (.51) .290 (7.37) .875 (22.22) 90 Left (1) .020 (.51) .474 (12.07) .390 (9.90) 90 Right (2) .020 (.51) .200 (5.08) .200 (5.08) .474 (12.07) .374 (9.50) A A-.200 B Pin 1 Straight (0) .374 (9.50) 90 Right .020 (2) .020 (.51) .315 (8.00) MAX. .020 (.51) .385 .485 (9.78) (12.32) 1.02 (25.93) .315 (8.00) MAX. .020 (.51) .474 (12.07) .290 (7.37) .950 (24.13) .390 (9.90) Coining feature patented Refers to lead configuration for part number/ordering information 114 C 0 0.1 0.2 0.3 0.4 Dimensions: inches and (mm) Lead Spacing: .100" (2.54 mm) .100 (2.54) B 1 2 3 4 5 1.060 * (26.92) Single Row 52-970-XXX-XXX * For plate widths 1.060 and 1.560 there will be no coining. For these plates, increase dimensions to the right .020". Thus, any dimension on left will be reduced by .020. SPECTRUM CONTROL INC. * 8031 Avonia Rd. * Fairview, PA 16415 * Phone: 814-474-2207 * Fax: 814-474-2208 * Web site: www.spectrumcontrol.com SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 12/4/06 9:13 AM Page 51 Bolt-in Style Filter Plates No. of Plate filtered lines length (A) per row Hi-Density Centers 2mm (2.00) (4.00) (6.00) (8.00) (10.00) 0.487 0.409 0.409 0.330 0.330 (12.38) (10.38) (10.38) (8.38) (8.38) 1.560 * (39.62) 3 4 5 6 7 8 9 10 11 12 0.157 0.236 0.315 0.394 0.472 0.551 0.630 0.709 0.787 0.866 (4.00) (6.00) (8.00) (10.00) (12.00) (14.00) (16.00) (18.00) (20.00) (22.00) 0.662 0.662 0.583 0.583 0.504 0.504 0.426 0.426 0.347 0.347 (16.81) (16.81) (14.81) (14.81) (12.81) (12.81) (10.81) (10.81) (8.81) (8.81) 2.560 (65.02) 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 0.709 0.787 0.866 0.945 1.024 1.102 1.181 1.260 1.339 1.417 1.496 1.575 1.654 1.732 1.811 1.890 (18.00) (20.00) (22.00) (24.00) (26.00) (28.00) (30.00) (32.00) (34.00) (36.00) (38.00) (40.00) (42.00) (44.00) (46.00) (48.00) 0.886 0.886 0.807 0.807 0.729 0.729 0.650 0.650 0.571 0.571 0.492 0.492 0.414 0.414 0.335 0.335 (22.51) (22.51) (20.51) (20.51) (18.51) (18.51) (16.51) (16.51) (14.51) (14.51) (12.51) (12.51) (10.51) (10.51) (8.51) (8.51) 3.560 (90.42) 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 1.496 1.575 1.654 1.732 1.811 1.890 1.969 2.047 2.126 2.205 2.283 2.362 2.441 2.520 2.598 2.677 2.756 2.835 (38.00) (40.00) (42.00) (44.00) (46.00) (48.00) (50.00) (52.00) (54.00) (56.00) (58.00) (60.00) (62.00) (64.00) (66.00) (68.00) (70.00) (72.00) 0.993 0.993 0.914 0.914 0.835 0.835 0.757 0.757 0.678 0.678 0.599 0.599 0.520 0.520 0.442 0.442 0.363 0.363 (25.22) (25.22) (23.22) (23.22) (21.22) (21.22) (19.22) (19.22) (17.22) (17.22) (15.22) (15.22) (13.22) (13.22) (11.22) (11.22) (9.22) (9.22) A A-.200 B .250 (6.35) .500 (12.70) O .120 x2 Pin 1 .079 (2.00) C Straight (0) .020 (.51) .289 (7.34) .020 (.51) 1.102 (28.00) 90 Left (1) .020 (.51) 90 Both (3) .289 (7.34) .315 (8.00) MAX. .315 (8.00) MAX. .538 (13.71) .020 (.51) .290 (7.37) .675 (17.15) (.51) .289 (7.34) .289 (7.34) .315 (8.00) MAX. .020 .290 (.51) (7.37) .850 (21.60) .315 (8.00) MAX. .374 (9.50) .020 (.51) .385 (9.78) .921 (23.40) Double Row .100 (2.54) .500 (12.70) .079 (2.00) .079 (2.00) .250 (6.35) O .120 x2 .079 (2.00) C .020 (.51) .210 (5.33) .315 (8.00) MAX. .538 .020 (.51) (13.71) 1.102 (28.00) 90 Both (3) .020 (.51) .210 (5.33) .315 (8.00) MAX. .675 (17.15) .020 (.51) .290 (7.37) .833 (21.16) 90 Left (1) .020 (.51) .453 (11.51) .369 (9.37) 90 Right (2) .020 (.51) .210 (5.33) .210 (5.33) .453 (11.51) .374 (9.50) A A-.200 B Pin 1 Straight (0) .374 (9.50) 90 Right .020 (2) .020 (.51) .315 (8.00) MAX. .020 (.51) .385 .464 (9.78) (11.79) 1.000 (25.40) .315 (8.00) MAX. .020 (.51) .453 (11.51) .290 (7.37) .930 (23.62) .369 (9.37) Coining feature patented Refers to lead configuration for part number/ordering information C 0.079 0.157 0.236 0.315 0.394 Dimensions: inches and (mm) Lead Spacing: .079" (2.00 mm) .100 (2.54) B 2 3 4 5 6 1.060 * (26.92) Single Row 52-971-XXX-XXX Filtered Arrays *1566 PRINTER 063-120 v2 * For plate widths 1.060 and 1.560 there will be no coining. For these plates, increase dimensions to the right .020". Thus, any dimension on left will be reduced by .020. SPECTRUM CONTROL INC. * 8031 Avonia Rd. * Fairview, PA 16415 * Phone: 814-474-2207 * Fax: 814-474-2208 * Web site: www.spectrumcontrol.com SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 115 *1566 PRINTER 063-120 v2 12/4/06 9:13 AM Page 52 Shrouded Latch Filter Plates Shrouded Latch Filter Plates are an effective method for combining an electronic interface and EMI solution in one package. The Shrouded Latch incorporates the Bolt-in concept filter plate with the latching feature of popular ribbon cable headers. This product is available in pin counts of 10 through 64 positions. The latch is available in a variety of standard heights. The Shrouded Latch Filter Plate is ideal for securing and protecting the filter element from exposure to mechanical shock and vibration which could loosen the cable interface. Base Plate Material ............................ Brass UNS ............................................. C26000/C27000 Base Plate Thickness .......................... .040" (1.0mm) Shrouded Latch Filter Plate Advantages Filtered Arrays Mechanical Specifications Plating ............................... Tin, I Available in 10 to 64 positions I Mates to most ribbon cable connectors I Variety of latch ejector heights available I Pins on .100" centers I Reliable cable retention for high vibration applications Lead Plating ................... Gold plate I Mixed capacitance values and schematics available Lead Diameter ................. o .025" (0.6mm) I Excellent filtering from 5 MHz to 1 GHz and beyond Current Rating ................ 5 Amps I Shroud protects filter elements from potential damage I Available in RoHS compliant versions ............................................. RoHS version will be silver Shrouded Material ......... Thermoplastic ............................................. Polyester UL94V-0 Lead Material .................. Copper alloy Ordering Information Example: 53-038-014-BS1 The part number shown represents a shrouded latch filter plate with 14 filtered lines. Filters are C style with a capacitance value of 100pF. The plate has a short latch height and double shroud configuration. 53 -* 038 Shrouded Latch Filter Plate * Replace "-" with "F" for RoHS complaint version 116 0 14 - B Total Number of Filtered Lines2 rows 10 14 16 20 24 26 30 34 40 44 50 60 64 Filter Designation A - T from table on page 118. ** S 1 Latch Height Configuration S - Short .435" (11.0mm) L - Long .575" (14.6mm) 1 - Double Shroud 2 - Single Shroud 3 - Single Shroud w/90 bend opposite side ** To request selective line filtering, a mechanical configuration or material specification not shown in this catalog, please complete and forward the design inquiry form on page 121. We will review your request and provide you with a part number. SPECTRUM CONTROL INC. * 8031 Avonia Rd. * Fairview, PA 16415 * Phone: 814-474-2207 * Fax: 814-474-2208 * Web site: www.spectrumcontrol.com SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 *1566 PRINTER 063-120 v2 12/4/06 9:13 AM Page 53 Shrouded Latch Filter Plates A B .100 (2.54) TYP. Filtered Arrays * Latch height S .435 (11.05) L .575 (14.61) Latch height* .64 (16.25) REF. .47 (11.93) REF. .100 (2.54) 1.00 (25.40) 2.40 (60.96) REF. (4.02) X 2 C A B C Part Number Number of Circuits in (mm) in (mm) in (mm) 53-038-010-XXX* 53-038-014-XXX 53-038-016-XXX* 53-038-020-XXX* 53-038-024-XXX 53-038-026-XXX 53-038-030-XXX 53-038-034-XXX 53-038-040-XXX* 53-038-044-XXX 53-038-050-XXX* 53-038-060-XXX 53-038-064-XXX* 10 14 16 20 24 26 30 34 40 44 50 60 64 2.00 2.20 2.30 2.50 2.70 2.80 3.00 3.20 3.50 3.70 4.00 4.50 4.70 (50.8) (55.9) (58.4) (63.5) (68.6) (71.1) (76.2) (81.3) (88.9) (94.0) (101.6) (114.3) (119.4) 1.10 1.30 1.40 1.60 1.80 1.90 2.10 2.30 2.60 2.80 3.10 3.60 (27.9) (33.0) (35.6) (40.6) (45.7) (48.3) (53.3) (58.4) (66.0) (71.1) (78.7) (91.4) 1.58 1.78 1.88 2.08 2.28 2.38 2.58 2.78 3.08 3.28 3.58 4.08 (40.1) (45.2) (47.8) (52.8) (57.9) (60.5) (65.5) (70.6) (78.2) (83.3) (90.9) (103.6) 3.80 (96.5) 4.28 (108.7) * Indicate standard sizes Dimensions in inches (mm) SPECTRUM CONTROL INC. * 8031 Avonia Rd. * Fairview, PA 16415 * Phone: 814-474-2207 * Fax: 814-474-2208 * Web site: www.spectrumcontrol.com SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 117 *1566 PRINTER 063-120 v2 12/4/06 9:13 AM Page 54 Custom Filter Plates High Volume Industrial As a long-term producer of filter plates for industrial applications, Spectrum Control understands the cost requirements of this market. In turn, we have established a program to develop and manufacture custom designed filter plates for cost sensitive industrial applications. We have engineered a variety of capacitive only filter elements that provide excellent RF isolation from 5 MHz to 1 GHz and beyond. To determine the available capacitance values, contact Spectrum Control. Our technical staff will work with you to develop a solution that meets your system and budget needs. Filtered Arrays Military/High Reliability 118 Improving the electromagnetic compliance (EMC) of electronic systems is an area of intense focus within the defense and avionics industries. To achieve this goal, many companies are replacing discrete filter elements and surface mount filters with feed-thru filter plate assemblies for higher frequency isolation. Spectrum Control will custom design a filter plate that meets your size, material and filtering requirements. We are capable of providing stringent testing and analysis of our filter plate assemblies to MIL-F-15733 and MIL-F-28861. To learn how Spectrum Control can satisfy your EMC application, fax or send us your requirements on the design inquiry form on page 121. SPECTRUM CONTROL INC. * 8031 Avonia Rd. * Fairview, PA 16415 * Phone: 814-474-2207 * Fax: 814-474-2208 * Web site: www.spectrumcontrol.com SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 *1566 PRINTER 063-120 v2 12/4/06 9:13 AM Page 55 Custom Capabilities In addition to our custom filter plates, Spectrum Control offers a number of value added features designed to complement your manufacturing operation. Our marketing and engineering staff will evaluate your design or manufacturing parameters and develop a filter solution which provides increased filtering performance economically. Spectrum Capabilities I I I Custom assemblies with varying cable lengths and impedances for high clock speeds associated with digital electronics Integrate a filter solution with other components to ensure a completely functional device Perform EMC evaluations on your equipment, recommending proper placement of EMI/RFI filtering components. Filtered Headers Replace the unfiltered connector on your PC board with Spectrum Control's low cost filtered header. This innovative new product allows you to meet EMC emissions and susceptibility standards with minimal or no board change. Flat Conductor Cables Flat conductor cables are often selected as an effective method of interconnection. Spectrum can save you time and money by installing conductor cables to your filter plates. Flat conductor cables are available in varying lengths, conductor counts, and in several termination configurations. Filtered Arrays Filtered Headers Easy Mate(R) Patent pending .250 (6.36) MIN. X Lead Stabilizer Spectrum Control has developed a filter plate lead stabilizer bar to protect leads during installation and ensure proper alignment to PCB. .300 (7.63) Bolt-in Coining process patented .098 (2.49) .540 (13.73) .100 (2.54) .062 (1.58) .003 (.08) L 100 (2.54) A Lead stabilizer position can be adjustable SPECTRUM CONTROL INC. * 8031 Avonia Rd. * Fairview, PA 16415 * Phone: 814-474-2207 * Fax: 814-474-2208 * Web site: www.spectrumcontrol.com SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 119 *1566 PRINTER 063-120 v2 12/4/06 9:13 AM Page 56 Typical Insertion Loss 100 80 Insertion Loss (dB) Filter Selection EMI Filter Performance C-Style Capacitor I H 60 G F 40 A 20 The electrical characteristics table and insertion loss graphs indicate the performance of feed-thru capacitors and Pi type filters. Utilize this information to specify the EMI filtering components included in your filter plate. B C 0 E 0.1MHz 1MHz 10MHz 100MHz Frequency D 1GHz) 10GHz 100 T Custom Filtering Spectrum Control filter plates are engineered to accommodate selective line filtering. Several different types of filters may be specified in a single, easy to install filter plate, allowing you to facilitate a wide range of filtering requirements. For selective line filtering, provide a sketch indicating the filters and positions required. The example below represents a 10 pin, 2 row plate with six 1000 pF feedthru capacitors and four 1700 pF Pi type filters. Part Number Based on front view of plate 10 F F F R R 6 1 F F F R R 5 Filtered Arrays Filter** Circuits Value S Pi Capacitor R 60 Q 40 L M N 20 O P 0 0.1MHz 10MHz 100MHz Frequency 1GHz 10GHz Above curves represent application of proper grounding fundamentals, for assistance consult with Spectrum Control. Minimum Insertion Loss - Decibels (dB) 50 ohm system per MIL-STD-220 (no load) Tolerance Working Voltage DC -55C to +125C 5 MHz 10 MHz 20 MHz 50 MHz 100 MHz 200 MHz 500 MHz 1 GHz A 68 pF 20% 77 100V -- -- -- -- -- 3 10 16 B 100 pF 20% 53 100V -- -- -- -- 1 6 14 19 C 135 pF +100/-0% 23 100V -- -- -- 1 5 10 16 20 D 470 pF 20% 11 100V -- -- 2 7 13 19 25 27 820 pF 20% 6 100V -- 2 6 12 18 24 30 33 E C F 1000 pF 20% 5 100V -- 3 7 14 20 26 32 35 G 1500 pF 20% 3.5 100V 1 4 10 16 22 29 36 37 H 2500 pF +100/-0% 1.3 100V 5 11 17 23 29 35 38 40 4000 pF +100/-0% .8 100V 9 15 21 27 34 38 42 46 Max. 635 100V -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- I J Insulated K Grounded Insert 10 pF L 68 pF 20% 65 100V -- -- -- -- 1 6 17 23 M 100 pF 20% 46 100V -- -- -- -- 2 9 22 28 N 135 pF +100/-0% 25 100V -- -- -- 1 6 17 26 34 O 470 pF 20% 11 100V -- -- -- 9 18 22 36 43 -- 820 pF 20% 6 100V -- 4 13 23 31 45 52 Q 1000 pF 20% 5 100V -- 2 7 16 24 36 51 59 R 1700 pF +100/-0% 1.9 100V 1 6 14 28 35 49 64 69 S 2500 pF +100/-0% 1.3 50V 4 9 16 28 41 54 70 70 T 5000 pF +100/-0% .7 100V 9 15 28 41 53 66 70 70 P Pi * 3 dB cut-off frequency calculated at the maximum capacitance. ** For Hi-Density centers (2 mm) only C style filters are available, to a maximum of 4000pF. 120 1MHz 3 dB Max Cut-off Frequency (MHz)* Capacitance Filter Designation Insertion Loss (dB) 80 All High-Density capacitors are 50 volts @ 125C. SPECTRUM CONTROL INC. * 8031 Avonia Rd. * Fairview, PA 16415 * Phone: 814-474-2207 * Fax: 814-474-2208 * Web site: www.spectrumcontrol.com SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 *1566 PRINTER 063-120 v2 12/4/06 9:13 AM Page 57 Custom Filter Plates Filter Plate Design Inquiry Form General Information Customer: Location: Address: City: State: Contact: Title: Phone: Fax: Zip: Project Information Project name: Annual usage: Target price: Intended application: Quote quantity: Function of circuit filter is used in: Target cost: Functional Detail NOTE: Bold lettering represents standard, readily available material (Circle the appropriate parameters needed) Total Lead Length Lead Diameter 0.020" 0.025" 0.032" 0.040" 0.700" 1.00" 1.102" Lead Material Phosphor Bronze Lead Plating Copper Gold Tin Silver Brass UNS C26000/C27000 Cold Rolled Steel (CRS) UNS G10080/G10180 Aluminum UNS A93003/A96061 Beryllium Copper* * For Beryllium Copper, ask about our new "Easy Mate(R)" Plate Plate Thickness ( 0.002") (0.010" for Easy Mate(R)Jr.) (0.020" for Bolt-in) 0.026" (0.012" for Easy Mate(R) ) Center-to-Center Spacing (Not all capacitances available on all centers) Plating of Base Plate 0.033" 0.041" Tin Silver 90/10 Solder Standard (inch): 0.079 0.100 Metric (mm): 2 2.54 Nickel Filtered Arrays Base Plate Material Detailed Sketch and Comments Area Include Mounting Detail SPECTRUM CONTROL INC. * 8031 Avonia Rd. * Fairview, PA 16415 * Phone: 814-474-2207 * Fax: 814-474-2208 * Web site: www.spectrumcontrol.com SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 121 *1566 PRINTER 063-120 v2 12/4/06 9:13 AM Page 58 Barrier Strip Filtered Terminal Blocks The barrier strip filtered terminal block is designed provide excellent EMI/RFI filtering of AC and DC power lines and control lines. This terminal block is available in various sizes, with terminal for soldering or spade lugs. Application examples include filtering power supplies in telecommunications equipment, metering, industrial controls, instrumentation and EDP equipment. Specifications ELECTRICAL Features I I I I I I I Filtered Arrays I I UL recognized and CSA approved for DC voltages E133076, UL 1059 LR92537, CSA STD 22.2 N158-1987 and ECN584B Filter element provides high insertion loss for EMI/RFI filtering of AC and DC power and control lines Rugged construction provides protection to filtering element; especially useful for repeated changes in wiring or field connections 2 to 6 terminals available (combine if larger number of terminals needed) Cost-effective solution for industrial interconnection EMI filtering problems Termination options available: straight lead, male or female disconnects, pigtail (12 AWG = 0.081" (2.05mm); 22 AWG = 0.025" (0.64mm) Available in RoHS compliant versions Pi Filter Operating temperature: Working voltage: Capacitance: Dielectric withstanding voltage: Current rating: D.C. resistance: The part number shown represents a barrier strip terminal block with six terminals and rated for 20 Amps. Male disconnects (.250") are the method of termination. 52 -* 160 - 006 - A 1700VDC 20A .01 ohms max. Typical Insertion Loss -- dB: In 50 Ohm Circuit 30 MHz......22 300 MHz......70 50 MHz......32 500 MHz......75 100 MHz......48 1000 MHz......75 MECHANICAL Center spacing: Wire size: Screw size: Molded material: Ordering Information Example: 52-160-006-A AOO -55 C to 105 C 100VDC 2,500 pF to 5,200 pF Tightening torque: Terminal: .438" (11.1 mm) AWG #12 max for 20A 20A - #6-32, zinc-plated philslot screws Black, UL rated 94VO thermoplastic 9 in.-lbs. max. Brass, tin-plated AOO .758 (19.3) (R) Barrier Strip Terminal Block 160 - Front panel mount 188 - Rear panel mount Number of Terminals 002 - 2 terminals through Current Rating A - 20 Amps 006 - 6 terminals For instructions on soldering to filter terminals, please refer to page 107 in filter plate section. Special Terminations Code Note: Leave blank if ordering standard product. Male quick disconnects directly on terminal block. AO1 . . . . . . .187 (4.8) .820 (20.9) 1.30 (33.1) MAX. TYPICAL .187 (4.8)-AO1 .250 (6.4)-AOO .032 (.8) THK. FOR BOTH AOO . . . . . . .250 (6.4) * Replace "-" with "F" for RoHS complaint version 122 Dimensions in inches (mm) For custom designs see page 127 and consult with factory. SPECTRUM CONTROL INC. * 8031 Avonia Rd. * Fairview, PA 16415 * Phone: 814-474-2207 * Fax: 814-474-2208 * Web site: www.spectrumcontrol.com SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 *1566 PRINTER 121-170 v2 12/4/06 9:30 AM Page 1 Barrier Strip Filtered Terminal Blocks Front panel mount A O.19 thru (2X) (4.8) B C .56 (14.2) .79 (20.1) .40 (10.2) .20 (5.1) #6-32 WIRE CLAMP SCREWS .438 (11.1) .31 (7.9) .032 (.81) .38 (9.7) .76 (19.3) .65 (16.5) GROUND PLANE .093 x 45 Chamfer x 4 Dimensions in inches (mm) 20 Amps Part Number Number of Circuits in. A (mm) in. B (mm) in. C (mm) 52-160-002-A 2 1.71 (43.4) 1.31 (33.3) 1.02 (25.9) 52-160-003-A 3 2.15 (54.6) 1.75 (44.5) 1.46 (37.1) 52-160-004-A 4 2.59 (65.8) 2.19 (55.6) 1.90 (48.3) 52-160-005-A 5 3.02 (76.7) 2.62 (66.5) 2.32 (58.9) 52-160-006-A 6 3.46 (87.9) 3.06 (77.7) 2.77 (70.4) Also available through Spectrum Control's authorized European distributors/agents. Filtered Arrays .062 (1.6) .032 (.81) O.312 (7.9) Rear panel mount D .275 (7.0) #6-32UNC-2A THD COMBO HEAD SCREWS B .059 (1.5) 1.00 (25.4) .212 (5.4) (2X) .75 (19.0) .415 (10.5) GROUND PLANE .062 (1.6) X .032 (.81) A C .80 (20.3) .65 (16.5) .100 (2.54) 4-40 THREADED THRU GROUNDING STANDOFF (2X) .062 (1.6) .032 (.81) TYP. O.312 TYP. (7.9) Dimensions in inches (mm) 20 Amps Part Number Number of Circuits in. A (mm) in. B (mm) in. C (mm) in. D (mm) 52-188-002-A 2 1.31 (33.3) .438 (11.1) 1.86 (47.3) 1.02 (25.9) 52-188-003-A 3 1.75 (44.4) .875 (22.2) 2.30 (58.4) 1.46 (37.1) 52-188-004-A 4 2.19 (55.6) 1.313 (33.3) 2.74 (69.5) 1.90 (48.3) 52-188-005-A 5 2.62 (66.6) 1.750 (44.4) 3.17 (80.6) 2.32 (58.9) 52-188-006-A 6 3.06 (77.7) 2.188 (55.6) 3.61 (91.7) 2.77 (70.4) SPECTRUM CONTROL INC. * 8031 Avonia Rd. * Fairview, PA 16415 * Phone: 814-474-2207 * Fax: 814-474-2208 * Web site: www.spectrumcontrol.com SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 123 *1566 PRINTER 121-170 v2 12/4/06 9:30 AM Page 2 250 Volt AC Rated Filtered Terminal Blocks Spectrum Control's filtered terminal block provides superior EMI/RFI filtering of AC power and control lines. This terminal block is available in various sizes, with terminals for soldering, spade lugs, or wire pigtails. Termination options available: straight lead male or female disconnects, or wire pigtails in lengths to your specification. I Features I I I I Applications I UL recognized and CSA approved for AC voltages. E133076, UL 1059. LR92537, CSA STD 22.2 N158-1987 and ECN584B. Termination options available: straight lead, male or female disconnects, pigtail (12 AWG-22 AWG). I I I I I I I I .213 (5.41) Specifications B ELECTRICAL Operating temperature: Voltage rating: Current rating: .093 x 45 Chamfer 4x Wire range: Torque: Capacitance: Marking: Stamp Dielectric withstanding voltage: Filtered Arrays .562 (14.28) .212 (5.4) (2X) Marking: SCI 52-257-XXX-A XXXX - Date Code A C #6-32UNC-2A THD. Philslot Screw Zinc Plated .32 (8.13) .032 (.81) .40 (10.16) .27 (6.86) .415 (10.5) GROUND PLANE .062.002 (1.57.10) .650 (16.51) MECHANICAL Center spacing: Wire size: Screw size: Molded material: Tightening torque: Terminal options: .75 (19.05) .810 (20.57) .031.002 (.79.05) O.312 (7.9) Metering equipment Programmable controllers Industrial process control Heavy equipment controls Power supplies Regulators Surge sensing equipment Power factor correction Telecommunications power management, ATM, Sonet, etc. Medical equipment 1500VAC @ 25 C .438" (11.1 mm) AWG #12 max. for 20 Amp 20A - #6-32, zinc plated philslot UL rated 94VO polyamide 9 in.-lbs. max. straight lead, male or female disconnects, pigtail Number of Circuits in. (mm) in. (mm) in. (mm) 52-257-002 2 1.71 (43.4) 1.31 (33.3) 1.02 (25.9) 52-257-003 3 2.15 (54.6) 1.75 (44.5) 1.46 (37.1) 52-257-004 4 2.59 (65.8) 2.19 (55.6) 1.90 (48.3) 52-257-005 5 3.02 (76.7) 2.62 (66.5) 2.32 (58.9) 52-257-006 6 3.46 (87.9) 3.06 (77.7) 2.77 (70.4) Part Number A -55 C to +105 C 250VAC 20 Amps 12-22AWG 9 lb-in. 2000pF to 5200pF B C Dimensions in inches (mm) 124 SPECTRUM CONTROL INC. * 8031 Avonia Rd. * Fairview, PA 16415 * Phone: 814-474-2207 * Fax: 814-474-2208 * Web site: www.spectrumcontrol.com SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 *1566 PRINTER 121-170 v2 12/4/06 9:30 AM Page 4 PCB Mount Filtered Terminal Blocks The PCB mount filtered terminal block is designed to provide excellent EMI/RFI filtering of low voltage DC power lines and control lines. These new terminal blocks use a unique screw clamp system with a wire protector which provides for quick and easy installation. Spectrum's PCB Mount terminal blocks can be used for a variety of power supply filtering applications in telecommunications equipment, metering, industrial controls, instrumentation and EDP equipment. Specifications ELECTRICAL Features I I I I I Filtered Arrays I I I C Filter Filter element provides high insertion loss for EMI/RFI filtering of DC power and control lines Rugged construction provides protection to filtering element; especially useful for repeated changes in wiring or field connections 2 to 12 terminals available (combine if larger number of terminals needed) Quick and easy PCB installation and maintenance Cost-effective solution for industrial interconnection EMI filtering problems Selectively loaded filter pins to economically meet exact filtering requirements Available with European (5 mm) or US (.200") pin spacing Available in RoHS compliant versions Operating temperature: Working voltage: Capacitance: Dielectric withstanding voltage: Current rating: D.C. resistance: 10 MHz....... 10.4 50 MHz....... 23.9 100 MHz....... 29.9 MECHANICAL Center spacing: Wire size: Screw material: Recommended PCB hole diameter: Molded material: Tightening torque: Terminal: The part number shown represents a low profile PCB mount terminal block for thru-hole grounding with six terminals (US spacing). - * 227 - Terminal Block type 227 U.S. pin spacing 228 Metric pin spacing 006 - 707VDC 12 Amps max. .01 ohms max. Typical Insertion Loss -- dB: In 50 Ohm Circuit Ordering Information Example: 52-227-006-L 52 -40 C to 80 C 100VDC 2500 pF* +80% / -20% L 500 MHz......... 43.9 1000 MHz......... 49.9 US .200: (5.08 mm) EURO .197" (5 mm) AWG 12 through 26 steel, zinc chromate plate .05" (1.30 mm) contact hole UL rated 94VO polyamide 2.5 in.-lbs. max. Brass, tin-plated * For filter elements with additional capacitance values, consult factory. Number of Low profile terminals sizing 002 - 2 terminals See page 126 thru 012 - 12 terminals * Replace "-" with "F" for RoHS complaint version 125 SPECTRUM CONTROL INC. * 8031 Avonia Rd. * Fairview, PA 16415 * Phone: 814-474-2207 * Fax: 814-474-2208 * Web site: www.spectrumcontrol.com SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 *1566 PRINTER 121-170 v2 12/4/06 9:30 AM Page 5 PCB Mount Filtered Terminal Blocks US Pin Spacing Part Number Number of Circuits 52-227-002 2 52-227-003 3 A (mm) in. Low Profile .53 (13.5) (11.2) .44 .30 (7.6) (16.3) .64 52-227-004 4 .84 (21.4) 52-227-005 5 1.04 (26.5) 52-227-006 6 1.24 (31.5) 52-227-007 7 1.44 (36.6) 52-227-008 8 1.64 (41.7) 52-227-009 9 1.84 (46.8) 52-227-010 10 2.04 (51.9) 52-227-011 11 2.24 (57.0) 52-227-012 12 2.44 (62.0) .200 TYP. (5.08) .12 (3.05) .03 (.76) .20 (5.1) To order add -L- after part number. .315 (8.0) .375 (9.5) .515 (13.0) A .10 (2X) (2.54) O.040 (1.0) .375 (9.5) .350 (8.9) For effective filtering, the ground plane must be soldered to the printed circuit board. .45 (11.4) O.040 (1.0) Dimensions in inches (mm) Number of Circuits in. 52-228-002 2 .43 (10.9) 52-228-003 3 .63 (16.0) Part Number A (mm) 52-228-004 4 .83 (21.1) 52-228-005 5 1.02 (25.9) 52-228-006 6 1.22 (31.0) 52-228-007 7 1.42 (36.1) .53 (13.5) .30 (7.6) .118 (3.0) 8 1.61 (40.9) 52-228-009 9 1.81 (46.0) 52-228-010 10 2.00 (50.8) 52-228-011 11 2.20 (55.9) 52-228-012 12 2.40 (61.0) .03 (.76) To order add -L- after part number. .20 (5.1) .315 (8.0) .375 (9.5) .515 (13.0) A .100(2X) (2.5) O.040 (1.0) .350 (8.9) 52-228-008 .197 TYP. (5.0) Low Profile Filtered Arrays Metric Pin Spacing .375 (9.5) For effective filtering, the ground plane must be soldered to the printed circuit board. .39 (10.0) O.040 (1.0) Dimensions in inches (mm) SPECTRUM CONTROL INC. * 8031 Avonia Rd. * Fairview, PA 16415 * Phone: 814-474-2207 * Fax: 814-474-2208 * Web site: www.spectrumcontrol.com SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 126 *1566 PRINTER 121-170 v2 12/4/06 9:30 AM Page 6 Custom Filtered Terminal Blocks Terminal Block Design Inquiry Form Spectrum Control can incorporate EMI filters into a variety of terminal block designs. We offer product variations from several terminal block manufacturers. In addition to developing a filtering solution, we will add custom wiring and terminations to meet your requirements. Spectrum Control offers: I Unique package integration for customer specific needs I Wide range of designs from numerous terminal block manufacturers I Custom assemblies with varying cable lengths and terminations Terminal Block Design Inquiry Form General Information Customer: Location: Filtered Arrays Address: City: State: Contact: Title: Phone: Fax: Zip: Project Information Project name: Annual usage: Intended application: Quote quantity: Function of circuit filter is used in: Target cost: Target price: Detailed Sketch and Comments Area 127 SPECTRUM CONTROL INC. * 8031 Avonia Rd. * Fairview, PA 16415 * Phone: 814-474-2207 * Fax: 814-474-2208 * Web site: www.spectrumcontrol.com SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 *1566 PRINTER 121-170 v2 12/4/06 9:30 AM Page 7 EMI Filtered Connectors CERTIFIED SPECTRUM CONTROL INC. * 8031 Avonia Rd. * Fairview, PA 16415 * Phone: 814-474-2207 * Fax: 814-474-2208 * Web site: www.spectrumcontrol.com SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 128 *1566 PRINTER 121-170 v2 12/4/06 9:30 AM Page 8 Filtered Connector Product Positioning Guide Series F Ferrite Filtered Connectors I Filtering of high frequency interference I Short, space saving .318" footprint I Replaces individual ferrite leads, saving cost and space I Effective in meeting FCC, VDE, EN55022 and Japan's VCCI requirements Impedance (ohms) The Series F ferrite filtered connector is designed as a low cost EMI solution for high frequency interference. The space saving .318" footprint makes this product interchangeable with standard D-subminiature connectors. 100 50 Right Angle 25 10 Vertical Angle 5 Series F Connectors . . . . . . . . . . . . 132-136 1 5 10 25 50 100 Frequency (MHz) Typical Performance of 1000pF Chip Filtered (100) Series 100 Chip-Cap Filtered Connectors connectors I Available in 9, 15, 25 and 37 shell sizes I 0.318", 0.405" an 0.590" footprints available I Selective line filtering is available The Series 100 connectors provide an excellent combination of low cost and good performance. Styles are available as "drop-in" replacements for unfiltered connectors and as adapters for nonstandard applications. 80 Insertion Loss (db) I Lowest cost capacitive filtered 100 60 40 20 Series 100 Connectors . . . . . . . . . . 137-140 0 1 10 100 1000 10000 Frequency (MHz) Series 500 Low Profile Feed-thru Connectors connectors I Available in 9, 15 and 25 shell sizes I Compact design with a 0.318" footprint I Solid ground plane design provides EMI shielding The Series 500 filtered D-subminiature connectors feature a compact design for 90 PCB connectors and straight PCB connectors utilizing tubular capacitors. These filtered D-Subs are "drop-in" replacements for standard unfiltered connectors. 80 Insertion Loss (db) I Low Cost, High Performance Typical Performance of 1000pF FT (500) 100 60 40 20 0 Series 500 Connectors . . . . . . . . . . 141-144 and PI configurations I Selective line filtering is available I Tubular capacitor filtering provides effective performance through 10 GHz 1000 10000 Typical Performance of 1000pF FT (700) 80 Insertion Loss (db) I Available in both feed-thru capacitive 100 100 60 40 20 0 1 10 100 1000 10000 Frequency (MHz) Series 700 Connectors Filter Selection and Specifications . . . . . . . . . . . . . . 149-150 Shell Size 9 Connectors . . . . . . . . . 151-154 Shell Size 15 Connectors . . . . . . . . 155-158 Shell Size 25 Connectors . . . . . . . . 159-162 Shell Size 37 Connectors . . . . . . . . 163-166 Shell Size 50 Connectors . . . . . . . . 167-170 Typical Performance of 1000pF Pi (700) 100 80 Insertion Loss (db) shell sizes I One piece die cast housing design method of filtering at the I/O interface. The ability to selectively filter lines allows signals of various rates to pass without degrading signal integrity. Series 700 connectors feature a .590" footprint on right angle connectors. Styles are available with pin or socket contacts or as pin/socket adapters. 10 Frequency (MHz) Series 700 High Performance These connectors are a highly effective Filtered Connectors I Available in 9, 15, 25, 37 and 50 1 60 40 20 0 1 10 100 1000 10000 Frequency (MHz) 129 SPECTRUM CONTROL INC. * 8031 Avonia Rd. * Fairview, PA 16415 * Phone: 814-474-2207 * Fax: 814-474-2208 * Web site: www.spectrumcontrol.com SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 *1566 PRINTER 121-170 v2 12/4/06 9:30 AM Page 9 Other Key Pages Filtered Connector Selection Guide Series 600 Hi-Density Filtered Connectors I Available in 15, 26, 44, 62 and 78 shell sizes I Compact design using one piece die cast housing I Available in feed-thru capacitive configurations I Selective line filtering is available Pages Part Numbers & Options . . . . . . . . .171-172 Adapter Test Kit . . . . . . . . . . . . . . . . . . . .197 Waved Metal Gaskets . . . . . . . . . . . . . . . .198 Hooded Strain Reliefs . . . . . . . . . . . . . . . .199 Custom Engineered Solutions . . . . . . . . .200 Performance Testing . . . . . . . . . . . . . . . . .201 Board & Panel Cutouts . . . . . . . . . .202-203 This line of connectors incorporates the high performance and reliable filtering of Spectrum's standard D-subs in a Hi-Density format. These connectors are also available in a pin/socket adapter. Series 600 Hi-Density Connector . . . . . . . . . . 145-146 Series 600 Hi-Density Telecommunications Adapter . . . . . . . . . . . . . . . . . . . . . . 147-148 Filtered Combo D-Subminiature Connectors I Excellent filtering of signal, power and coaxial contacts with high performing feed-thru capacitors I Ground plane design provides superior EMI shielding I Available in a wide variety of mixed versions Spectrum's line of filtered combo D-subs provide high insertion loss with tubular or chip capacitive filtering. These connectors are available with 20 Amp power contacts, 40 Amp power contacts, 50 ohm coaxial contacts or 75 ohm coaxial contacts. High strength epoxy potting protects ceramic elements. Filtered Combo D-Subminiature Connectors . . . . . . . . . . . . . . . . . . . 173-180 Series E (ESD/EFT) Transient Protected Connectors I Fail safe design guards equipment in case of severe surge I Connects directly between the serial or parallel port of your hardware and cable I Available in 9, 15, 25, and 37 line protection Surge suppressors provide protection against data loss and damage due to transient overvoltages from a variety of sources including lighting, factory equipment, motors and AC power lines. Protects printers, personal computers, LANS, WANS, RS-232 and RS-422/485 equipment. Series E Connectors . . . . . . . . . . . . 181-184 Filtered datacom connectors are available for a wide variety of applications including original telephone manufacturing, operating telephone companies, cable reclamation, cable manufacturing and bay connectorization, LANs, WANs, network cards, broadband transmissions, workstations, peripherals, fax/modems, copy machines and multiplexing. Filtered Miniature Ribbon Connectors and Adapters. . . . . . . . . . . . . . . . . . 185-188 Filtered Modular Jack Connectors . . . . . . . . . . . . . . . 189-191 Filtered Mini-DIN Connectors . . . . . . . . . . . . . . . . . . . . . . . 192 Filtered USB Connectors . . . . . . . . 193-196 This series of filtered connectors includes custom products ranging from MIL-C-38999, ARINC military connectors to filtered industrial connectors. These connectors are available with capacitor values up to 500,000 pF per line making it ideal for most applications. Common markets for custom filtered connectors are military, industrial and medical equipment. Compact Shell Filtered Connectors . . . . 205 MIL-C-38999 . . . . . . . . . . . . . . . 206-211 Extended Shell Filtered Connectors. . . . 212 MIL-C-38999 . . . . . . . . . . . . . . . 213-221 MIL-C-83723 . . . . . . . . . . . . . . . 222-225 MIL-C-26482 . . . . . . . . . . . . . . . 226-229 Custom Filtered Connectors. . . . . . 230-231 Quality Acceptance Test Specifications . . . . . . . . . . . . . . . 232 Datacom Connectors I Modular jack connectors available filtered with ferrite or capacitive film I Modular jack connectors available in single or multiport styles I Filtered USB connectors available in a variety of configurations I Miniature ribbon connectors and adapters available in 50 line configurations Custom Filtered Connectors I Available in C, Pi, LC I I I I and T configurations Able to filter most connector interface types including circular, rack and panel, ARINC, etc. Value added options such as wire harnessing, flex circuits and hermeticity are available Selective line filtering available Use either tubular capacitors or planar arrays SPECTRUM CONTROL INC. * 8031 Avonia Rd. * Fairview, PA 16415 * Phone: 814-474-2207 * Fax: 814-474-2208 * Web site: www.spectrumcontrol.com SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 130 *1566 PRINTER 121-170 v2 12/4/06 9:30 AM Page 10 Advantages of Spectrum Filtered Connectors Spectrum offers the industry's most complete line of filtered D-subminiature connectors. Features I Filtered Connectors All shell sizes (9, 15, 25, 37 and 50) I Many termination types (PC mount, wire wrap, solder cup and 90 PCB) I In house ceramic tube design for high performance filtering I Filtering options: I Pi Filter Configuration (Provides 45-60 dB per decade slope to insertion loss curve) I Capacitive only C Filters (Provides cost-effective EMI attenuation) I Ferrite Filtered Series F Connectors (Provides filtering in situations that do not tolerate capacitive loading of circuit) I Series 500 Connectors (Short .318" PCB footprint) I Chip-Cap Series 100 Connectors (Short .318" PCB footprint) I Construction (Series 600 & 700) I One piece zinc diecast shell, nickel plated I Complete 360 grounding with ground plate I Patented coaxial springs ensure ground continuity Factors to be considered when evaluating EMI filtering through filtered connector or on-board filter: I EMI effectiveness I Cost of components I Hidden costs of extra components I Design of board I Reliability On-Board Filters Advantages of a Filtered Connector I I I I I I I 131 D-Subminiature Connectors Low ground impedance - Full ground plate and metallic shell provide minimal impedance and superior performance compared to on-board filter with high impedance Eliminate re-radiation - Filtered connector at interface leaves no path for bypassing the filter Ground plane shielding - Spectrum Control filtered connector ground planes shield the box even at the connector port Efficient space utilization - Filters located in connector provides additional space on PCB board Consistent performance - Filtered connectors provide more consistent pin to pin performance Fewer components - Filtered connectors reduce component count creating cost savings Reliability - Spectrum Control tests 100% of filters, on-board filters are usually spot tested SPECTRUM CONTROL INC. * 8031 Avonia Rd. * Fairview, PA 16415 * Phone: 814-474-2207 * Fax: 814-474-2208 * Web site: www.spectrumcontrol.com SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 *1566 PRINTER 121-170 v2 12/4/06 9:30 AM Page 11 Series F Ferrite Filtered Connectors The Series F filtered D-subminiature connectors incorporate a solid slab of ferrite material as the filtering element. This rugged one piece design provides a compact connector that is a drop-in replacement for standard connectors. The ferrite material has been chosen for optimum filtering performance in the 10 to 300 MHz. range. Impedance (ohms) Series F Applications 100 I Personal computers, microcomputer-applied products and peripheral/terminal equipment Eliminates common-mode noise along data lines in data communication terminals and digital equipment 50 Right Angle 25 10 Vertical Angle Features I I I I I I I I I I I I Low cost, high performance ferrite filter No distortion of wave forms Replaces individual ferrite bead filters, saving cost and space Provides both pin to ground and pin to pin filtering Effective in helping meet requirements of FCC, VDE, EN55022 and Japan's VCCI Short, space saving .318" footprint Interchangeable with standard D-subminiature connectors Can be installed directly over PCB trace pattern with no shorting 4-40 UNC locking insert eliminates loose hardware Metal shielding front shell Gold plated contacts RoHS compliant versions available (replace 56- with 56F) 5 1 5 10 25 50 100 Frequency (MHz) Mechanical Specifications Front Shell. . . . . . . . Steel (Tin Plated) Housing . . . . . . . . . UL 94V-0 Rated thermoplastic, black Contacts . . . . . . . . . Phosphor Bronze (sockets) . . . . . . . . . . . . . . . . or Brass (pins) Contact Plating . . . . . . . . . . Gold Flash (<10 in.) over Nickel Operating Temperature. . . . . . . -40C to +105C Electrical Specifications Frequency (MHz) 1 10 30 50 100 Impedance (Ohms) Right Angle 2 15 20 23 27 Vertical 1 6 10 12 15 Filtered Connectors I Frequency Range . . . . . . . . . . . 10 - 300 MHz Current Rating . . . . . . . . . . . 5 Amps Dielectric Withstand Voltage . . 1000 VAC for one minute Insulation Resistance . . . . . . . . 1000 megohms Min. @ 500VDC SPECTRUM CONTROL INC. * 8031 Avonia Rd. * Fairview, PA 16415 * Phone: 814-474-2207 * Fax: 814-474-2208 * Web site: www.spectrumcontrol.com SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 132 *1566 PRINTER 121-170 v2 12/4/06 9:30 AM Page 12 Series F Ferrite Filtered Connectors Filtered Connectors Pin Contact - Right Angle Mount Part Number Frequency Description 30 MHz 100 MHz Range 56-402-001 D-Sub 9 pin 56-412-001 D-Sub 15 pin 56-422-001 D-Sub 25 pin 133 Typ. Impedance (Ohms) 10 MHz 20 27 to 300 MHz A+/0.010 (0.25) B +/0.005 (0.13) C +/0.015 (0.38) D +/0.010 (0.25) E +/0.015 (0.38) F +/0.005 (0.13) G +/0.004 (0.10) H +/0.005 (0.13) I +/0.005 (0.13) J +/0.005 (0.13) 0.666 (16.92) 0.984 (25.00) 1.213 (30.81) 0.318 (8.08) 0.751 (19.10) 0.324 (8.22) 0.108 (2.74) 0.984 (25.00) 0.432 (10.98) 0.606 (15.40) 0.994 (25.25) 1.312 (33.32) 1.541 (39.14) 0.318 (8.08) 0.751 (19.10) 0.648 (16.46) 0.108 (2.74) 1.312 (33.32) 0.756 (19.20) 0.929 (23.60) 1.534 (38.96) 1.852 (47.04) 2.088 (53.04) 0.318 (8.08) 0.751 (19.10) 1.196 (30.36) 0.110 (2.76) 1.852 (47.04) 1.304 (31.12) 1.476 (37.50) Also available through Spectrum Control's authorized European distributors/agents. Dimensions in inches (mm) SPECTRUM CONTROL INC. * 8031 Avonia Rd. * Fairview, PA 16415 * Phone: 814-474-2207 * Fax: 814-474-2208 * Web site: www.spectrumcontrol.com SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 *1566 PRINTER 121-170 v2 12/4/06 9:30 AM Page 13 *Hi-Density Series F Ferrite Filtered Connectors .350 (8.89) SCI Part Number and Date Code .100 (2.54) Typ. .494 .010 (12.55 0.25) .138 .010 (3.50 0.25) Socket Contact - Right Angle Mount .984 (24.99) .045 (1.14) Typ. .125 .003 Dia. (3.18 0.08) .004 (0.10) 2 Holes .277 (7.04) Posn. No. Ref. Typ. .100 (2.54) 15 6 5 1 2 .090 (2.29) Typ. .047 .002 Dia. (1.19 0.05) .006 (0.15) 15 Holes .100 (2.54) Part Number 56-404-001 Typ. Impedance (Ohms) Description D-Sub 9 socket 56-414-001 D-Sub 15 socket 56-424-001 D-Sub 25 socket 56-414-001-HD Hi-Density 15 socket Frequency 30 MHz 100 MHz Range 20 27 10 MHz to 300 MHz 16 26 A+/0.010 (0.25) B +/0.005 (0.13) C +/0.015 (0.38) D +/0.010 (0.25) E +/0.015 (0.38) F +/0.005 (0.13) G +/0.004 (0.10) H +/0.005 (0.13) I +/0.005 (0.13) J +/0.005 (0.13) 0.643 (16.33) 0.984 (25.00) 1.213 (30.81) 0.318 (8.08) 0.755 (19.20) 0.324 (8.22) 0.108 (2.74) 0.984 (25.00) 0.432 (10.98) 0.606 (15.40) 0.971 (24.66) 1.312 (33.32) 1.541 (39.14) 0.318 (8.08) 0.755 (19.20) 0.648 (16.46) 0.108 (2.74) 1.312 (33.32) 0.756 (19.20) 0.929 (23.60) 1.511 (38.38) 1.852 (47.04) 2.088 (53.04) 0.318 (8.08) 0.755 (19.20) 1.196 (30.36) 0.110 (2.76) 1.852 (47.04) 1.304 (31.12) 1.476 (37.50) 0.643 (16.33) 0.984 (25.00) 1.213 (30.81) Also available through Spectrum Control's authorized European distributors/agents. Filtered Connectors PC Board Mounting Dimensions * See inset drawing Dimensions in inches (mm) SPECTRUM CONTROL INC. * 8031 Avonia Rd. * Fairview, PA 16415 * Phone: 814-474-2207 * Fax: 814-474-2208 * Web site: www.spectrumcontrol.com SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 134 *1566 PRINTER 121-170 v2 12/4/06 9:30 AM Page 14 Series F Ferrite Filtered Connectors Filtered Connectors Pin Contact - Vertical Mount Part Number Typ. Impedance (Ohms) Frequency Description 30 MHz 100 MHz Range 56-407-001 D-Sub 9 pin 56-417-001 D-Sub 15 pin 56-427-001 D-Sub 25 pin 10 MHz 10 15 to 300 MHz A+/0.010 (0.25) B +/0.005 (0.13) C +/0.015 (0.38) D +/0.010 (0.25) E +/0.015 (0.38) F +/0.005 (0.13) G +/0.004 (0.10) H +/0.005 (0.13) I +/0.005 (0.13) 0.666 (16.92) 0.984 (25.00) 1.213 (30.81) 0.236 (5.99) 0.468 (11.88) 0.324 (8.22) 0.108 (2.74) 0.984 (25.00) 0.432 (10.98) .994 (25.25) 1.312 (33.32) 1.541 (39.14) 0.236 (5.99) 0.468 (11.88) 0.648 (16.46) 0.108 (2.74) 1.312 (33.32) 0.756 (19.20) 1.534 (38.96) 1.852 (47.04) 2.088 (53.04) 0.236 (5.99) 0.468 (11.88) 1.196 (30.36) 0.110 (2.76) 1.852 (47.04) 1.304 (31.12) Dimensions in inches (mm) 135 SPECTRUM CONTROL INC. * 8031 Avonia Rd. * Fairview, PA 16415 * Phone: 814-474-2207 * Fax: 814-474-2208 * Web site: www.spectrumcontrol.com SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 *1566 PRINTER 121-170 v2 12/4/06 9:30 AM Page 15 Series F Ferrite Filtered Connectors Part Number Typ. Impedance (Ohms) Frequency Description 30 MHz 100 MHz Range 56-403-001 D-Sub 9 socket 56-413-001 D-Sub 15 socket 56-423-001 D-Sub 25 socket 10 MHz 10 15 to 300 MHz A+/0.010 (0.25) B +/0.005 (0.13) C +/0.015 (0.38) D +/0.010 (0.25) E +/0.015 (0.38) F +/0.005 (0.13) G +/0.004 (0.10) H +/0.005 (0.13) I +/0.005 (0.13) 0.643 (16.33) 0.984 (25.00) 1.213 (30.81) 0.236 (5.99) 0.472 (11.98) 0.324 (8.22) 0.108 (2.74) 0.984 (25.00) 0.432 (10.98) .971 (24.66) 1.312 (33.32) 1.541 (39.14) 0.236 (5.99) 0.472 (11.98) 0.648 (16.46) 0.108 (2.74) 1.312 (33.32) 0.756 (19.20) 1.511 (38.38) 1.852 (47.04) 2.088 (53.04) 0.236 (5.99) 0.472 (11.98) 1.196 (30.36) 0.110 (2.76) 1.852 (47.04) 1.304 (31.12) Filtered Connectors Socket Contact - Vertical Mount Dimensions in inches (mm) SPECTRUM CONTROL INC. * 8031 Avonia Rd. * Fairview, PA 16415 * Phone: 814-474-2207 * Fax: 814-474-2208 * Web site: www.spectrumcontrol.com SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 136 *1566 PRINTER 121-170 v2 12/4/06 9:30 AM Page 16 Series 100 Chip-Cap Filtered Connectors These versatile and widely used PCB connectors are an inexpensive filtering method that eliminates the problem of conducted electromagnetic interference (EMI). Chip-cap plug and receptacles are available in 9, 15, 25 and 37 positions. These connectors are "drop-in" replacements for non-filtered D-subminiature connectors with matched PCB footprints. Housings are made of UL 94V-0 rated thermoplastic material. Low cost front metal shells are compatible with full metal-shell threaded insert mating hardware. Integral boardlocks secure posted connectors to the PC board, prior to soldering. I Offer economical, high performance EMI/RFI protection I Matched .318", .405" and .590" PCB footprints mean "Drop-in" replacement for non-filtered connectors 35 470 pF 30 220 pF 25 I Connectors have industry standard interface 5 I Connector insulators made of UL 94V-0 rated high temperature, thermoplastic 0 I Connector body is certified by the Canadian Standards Association Shells. . . . . . . . . . . . . . . . . Steel, tin plated Insulators . . . . . . . . . . . . . 94V-0 rated thermoplastic, . . . . . . . . . . . . . . . . . . . . . black Eyelets. . . . . . . . . . . . . . . . Brass, tin plated Threaded Inserts. . . . . . . . . Zinc Boardlocks . . . . . . . . . . . . . Copper alloy, tin plated 10 1 MHz 10 MHz 100 MHz 1 GHz 100 MHz 1 GHz Frequency 45 40 5600 pF 35 Insertion Loss (dB) Connector body is recognized under the Component Program of Underwriters Laboratories, Inc. (E149046) 100 pF 50 pF 15 Low cost chip capacitors I 180 pF 20 I Mechanical Specifications Filtered Connectors 40 Insertion Loss (dB) Features Typical Insertion Loss 45 2200 pF 30 1500 pF 25 1000 pF 820 pF 20 15 10 5 0 1 MHz 10 MHz Frequency Pin Contacts . . . . . . . . . . . Brass Socket Contacts . . . . . . . . . Phosphor Bronze Contact Plating . . . . . . . . . Duplex plated . . . . . . . . . . . . . . . . . . . . . as follows: 15uin (.38um) . . . . . . . . . . . . . . . . . . . . . gold on mating end, with . . . . . . . . . . . . . . . . . . . . . entire contact 50uin (1.27um) . . . . . . . . . . . . . . . . . . . . . min. nickel underplated and . . . . . . . . . . . . . . . . . . . . . flash gold finish Performance Specifications Current Rating . . . . . . . . . 5 Amps Contact Resistance . . . . . . . 8 Milliohms max. Capacitance . . . . . . . . . . . . 50, 100, 180, 220, 470, 820 . . . . . . . . . . . . . . . . . . . . . 1,000, 1,500, 2,200, 5,600 pF . . . . . . . . . . . . . . . . . . . . . and 47 nF 20% (custom valves . . . . . . . . . . . . . . . . . . . . . and selective loading available) Dielectric Withstanding Voltage . . . . . . . . . . . . . . . 700 VDC min. for 5 sec. Insulator Resistance . . . . . . 500 Megohms min. @ 100 VDC Working Voltage . . . . . . . . 200 VDC (100 VDC for 47 nF) Operating Temperature . . . . -55C/+85C 137 SPECTRUM CONTROL INC. * 8031 Avonia Rd. * Fairview, PA 16415 * Phone: 814-474-2207 * Fax: 814-474-2208 * Web site: www.spectrumcontrol.com SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 *1566 PRINTER 121-170 v2 12/4/06 9:30 AM Page 17 Series 100 Chip-Cap Filtered Connectors SPECTRUM CONTROL Ordering Information Example: 56-104-004-5-T 56 - 1 0 4 - This part number represents a Series 100 connector with a shell size of 9 and a socket to right angle configuration. The capacitance value is 470 pF and the connector has a .590" footprint with 4-40 threads. 004 - 5 - T Mounting or Hardware Options Series 100 Connectors Filtered D-sub Connectors Shell Size/ Number of Contacts 0 1 2 3 - 9 size 15 size 25 size 37 size Contact Type/Termination 1 2 3 4 5 6 7 - Pin to solder cup Pin to right angle Socket to straight PCB Socket to right angle Adapter (pin to socket) Socket to solder cup Pin to straight PCB - - Standard connector F - RoHS compliant version Capacitance Value 002 003 004 005 006 007 008 009 010 011 012 - 100 pF - 220 pF - 470 pF - 820 pF - 1500 pF - 5600 pF - 50 pF - 180 pF - 1000 pF - 2200 pF - 47 nF Footprint (right angle connectors only) 3 - .318" 4 - .405" 5 - .590" Board Layouts _ - .120 thru-hole and 15" gold 3G - 30" gold 5G - 50" gold TIB TIF MIB GBL6 JS SC and Straight PCBs - 4-40 thread on rear of flange - 4-40 thread on front of flange - M3 thread on rear of flange - For .062" boards - Jack screws Right Angles and Adapters _ - No GBL attached GL - Includes grounding board lock and 4-40 threads T - 4-40 threads GB - No board locks (includes 4-40 threads) J - Jack screws M - M3 thread GJ - GL and jack screws Shell A Size .005 (0.13) .318" and .405" Footprint Typical Layout - Top View .109 (2.77) O.043 (1.09) O.120 (3.05) .318 or .405 (8.08) (10.20) .056 .112 (1.42) (2.84) A .054 (1.385) O.043 (1.09) O.120 (3.05) .315 (8.00) .112 (2.84) .590 (14.99) .315 (8.00) A .984 (24.99) 15 1.312 (33.32) 25 1.852 (47.04) 37 2.500 (63.50) Shell A Size .005 (0.13) .590" Footprint Typical Layout - Top View .109 (2.77) 9 9 .984 (24.99) 15 1.312 (33.32) 25 1.852 (47.04) 37 2.500 (63.50) Filtered Connectors .054 (1.385) Dimensions in inches (mm) SPECTRUM CONTROL INC. * 8031 Avonia Rd. * Fairview, PA 16415 * Phone: 814-474-2207 * Fax: 814-474-2208 * Web site: www.spectrumcontrol.com SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 138 *1566 PRINTER 121-170 v2 12/4/06 9:30 AM Page 18 Series 100 Chip-Cap Filtered Connectors Pin Contact (plug) Socket Contact (receptacle) Straight PC Mount Straight PC Mount A B C A B C .33 .50.010 (8.36) (12.55.25) .055 (1.385) Typ. .011 (2.84) o .12 (3.05) .14 (3.56) .054 (1.385) D .055 (1.385) Typ. .011 (2.84) .23.006 (5.900.15) .08 (2.03) .32 .50.010 (7.90) (12.55.25) o .12 (3.05) .039.010 (0.99.25) .16 (4.06) .22.015 (5.580.38) .23.006 (6.000.15) .08 (2.03) .112 (2.84) .42.010 (10.720.25) .14 (3.56) .055 (1.385) D .32 .50.010 (7.90) (12.55.25) .33 .50.010 (8.36) (12.55.25) .055 (1.385) Typ. Filtered Connectors o .12 (3.05) .16 (4.06) 9 C D 1.213.015 .984.005 .667.010 .755 (30.810.38) (24.990.13) (16.920.25) (19.18) E Footprint .318 .405 25 2.088.015 1.852.005 1.534.010 1.614 (53.040.38) (47.040.13) (38.960.25) (41.00) 2.73.015 2.50.005 2.18.010 2.27 (69.320.38) (63.500.13) (55.420.25) (57.71) .590 .16 (4.06) E F .430 .318 (10.92) (8.08) .517 .405 (13.13) (10.29) .700 .590 (17.83) (14.99) Size 9 A B .039.010 (0.99.25) E F .112 (2.84) .42.010 (10.720.25) .125 (3.175) D Dimensions in inches (mm) 139 .23.006 (6.000.15) .025 (0.64) SQ F 15 1.541.015 1.312.005 .994.010 1.083 (39.140.38) (33.320.13) (25.250.25) (27.51) 37 o .12 (3.05) .039.010 (0.99.25) .112 (2.84) .42.010 (10.720.25) .125 (3.175) D B .055 (1.385) Typ. .011 (2.84) .23.006 (5.900.15) .025 (0.64) SQ A .112 (2.84) .42.010 (10.720.25) A B C A B C Size .16 (4.06) .22.015 (5.580.38) 90 PC Mount 90 PC Mount .011 (2.84) .039.010 (0.99.25) C D 1.213.015 .984.005 .643.010 .755 (30.810.38) (24.990.13) (16.330.25) (19.18) Footprint .430 .318 (10.92) (8.08) .405 .517 .405 (13.13) (10.29) .590 .700 .590 (17.83) (14.99) 25 2.088.015 1.852.005 1.511.010 1.614 (53.040.38) (47.040.13) (38.380.25) (41.00) 2.73.015 2.50.005 2.16.010 2.27 (69.320.38) (63.500.13) (54.840.25) (57.71) F .318 15 1.541.015 1.312.005 .971.010 1.083 (39.140.38) (33.320.13) (24.660.25) (27.51) 37 E Dimensions in inches (mm) SPECTRUM CONTROL INC. * 8031 Avonia Rd. * Fairview, PA 16415 * Phone: 814-474-2207 * Fax: 814-474-2208 * Web site: www.spectrumcontrol.com SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 *1566 PRINTER 121-170 v2 12/4/06 9:30 AM Page 19 Series 100 Chip-Cap Filtered Connectors Pin Contact (plug) Pin - Socket Adapter Solder Cup Termination A B C A .311 (7.90) .33 .50.010 (8.36) (12.55.25) .055 (1.385) Typ. .011 (2.84) o .12 (3.05) o .12 (3.05) .24.006 (6.000.15) E F D .039.010 (0.99.25) .241.006 (6.120.15) Shell .053 (1.34) .42.010 (10.720.25) .520 (13.31) Socket Contact (receptacle) B Solder Cup Termination Shell with grounding inserts A B C C D E .32 .50.010 (7.90) (12.55.25) o .12 (3.05) .24.006 (6.000.15) E F D Size C .053 (1.34) .42.010 (10.720.25) F Size A 1.213.015 .984.005 .643.010 .755 (30.810.38) (24.990.13) (16.330.25) (19.18) .16 (4.06) .16 (4.06) 9 .642 (16.31) 15 1.541.015 1.312.005 .971.010 1.083 (39.140.38) (33.320.13) (24.660.25) (27.51) .16 (4.06) .16 (4.06) 15 25 2.089.015 1.852.005 1.511.010 1.615 (53.040.38) (47.040.13) (38.380.25) (41.00) .16 (4.06) .16 (4.06) 2.73.015 2.50.005 2.16.010 2.27 (69.320.38) (63.500.13) (54.840.25) (57.71) .16 (4.06) .16 (4.06) 37 B .039.010 (0.99.25) E 9 A .329 .500.015 (8.36) (12.700.38) .250 (6.35) Typ. D Dimensions in inches (mm) B C D E .233.006 1.213.015 (5.92.15) (30.81.38) .984 (24.99) .667 (16.94) .970 (24.64) .233.006 1.541.015 (5.92.15) (39.14.38) 1.312 (33.33) .995 (25.27) 25 1.511 (38.38) .228.006 2.088.015 (5.80.15) (53.04.38) 1.852 (47.05) 1.532 (38.92) 37 2.158 (54.82) .228.006 2.729.015 (5.80.15) (69.32.38) 2.500 (63.50) 2.183 (55.45) Filtered Connectors .055 (1.385) Typ. .011 (2.84) Dimensions in inches (mm) SPECTRUM CONTROL INC. * 8031 Avonia Rd. * Fairview, PA 16415 * Phone: 814-474-2207 * Fax: 814-474-2208 * Web site: www.spectrumcontrol.com SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 140 *1566 PRINTER 121-170 v2 12/4/06 9:30 AM Page 20 Series 500 Low Profile Filtered Connectors Spectrum Control's Series 500 are cost effective, highly reliable EMI filtered D-subminiature connectors that feature a .318" footprint for 90 degree PCB connectors and a low profile housing on straight PCB connectors. Series 500 filtered D-subs are "drop-in" replacements for standard unfiltered D-sub connectors. The ability of these connectors to achieve EMI filtering within the smaller footprint is the result of technical advances in ceramic capacitors. Series 500 connectors use tubular capacitors for high performance EMI filtering. Quality features for these connectors include board lock mounting, metal front shells and gold plated contacts. Series 500 capacitive filtered D-sub connectors are an ideal solution to FCC/EC/VCCI emissions problems. These connectors are designed to protect equipment from external EMI noise and eliminate system glitches. Series 500 Applications Features I "Drop-in" replacements for unfiltered D-subminiatures I Compact design, featuring .318" footprint I Tubular feed-thru capacitors provide filtering superior to on-board components I Ground plane design provides EMI shielding I Full interchangeability; based on MIL-C-24308 I Each connector position is tested 100% for critical electrical parameters to ensure consistent performance I Insulators are UL recognized UL94-V0 flammability rated I 9, 15 and 25 shell sizes I Available with board lock feature and 4-40 mounting threads I Personal computers I Industrial process equipment I Graphics workstations I PBX telecommunications equipment I Selective filtering available I Cellular base stations and medical electronics I UL/CSA approved I Greater than 40 dB filtering up through 1 GHz without resonances I Bi-Directional control of EMI at the I/O ports Filtered Connectors Rear insulator Front insulator Pin terminal Right angle termination 4-40 threaded insert Ground plane Tubular capacitor Metal front shell Board lock Lead spacer 141 SPECTRUM CONTROL INC. * 8031 Avonia Rd. * Fairview, PA 16415 * Phone: 814-474-2207 * Fax: 814-474-2208 * Web site: www.spectrumcontrol.com SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 *1566 PRINTER 121-170 v2 12/4/06 9:30 AM Page 21 Series 500 Low Profile Filtered Connectors Mechanical Specifications Shell . . . . . . . . . . . . Steel, tin plated Insulators . . . . . . . . Glass-filled polyester, . . . . . . . . . . . . . . . . flammability UL94V-O Pin Contacts . . . . . . Copper alloy CA725, . . . . . . . . . . . . . . . . 15 microinch (0.38 m) gold plated* . . . . . . . . . . . . . . . . over nickel Typical Insertion Loss 60 Socket Contacts . . . . . . . . . Copper alloy CA725, . . . . . . . . . . . . . . . . 30 microinch (0.76 m) gold plated* . . . . . . . . . . . . . . . . over nickel Other environmental tests such as shock, vibration, humidity, etc. are performed as detailed in our filtered connector performance specifications on page 203. Electrical Specifications 0p F 150 20 1000 pF 10 44 0 1MHz 10MHz 0p F 100MHz Frequency Above curves represent application of proper grounding fundamentals. For assistance consult Spectrum Control. Current Rating . . . . . . . . . . . 5 Amps 840 pF is typically within 2 dB of 1000 pF curve. RF Current Rating . . . . . . . . . . . 0.3 Amps Filter Performance Contact Resistance . . . . . . . . 10 milliohms maximum Capacitance . . . . . . . 120, 440, 840, 1000, . . . . . . . . . . . . . . . . 1500 pF 30% Working Voltage . . . . . . . . . . 100 VDC Dielectric Withstanding Voltage . . . . . . . . . . 300 VDC Insulation Resistance . . . . . . . . 1 Gohm minimum UL Recognized. . . . . Under category of communication . . . . . . . . . . . . . . . . circuit accessories, . . . . . . . . . . . . . . . . File #E149046 5GHz 1GHz Cap. (pF) Value 30% 3 dB Insertion Loss (dB) Cut-off Freq. 20 100 500 1 2 (MHz) MHz MHz MHz GHz GHz 5 GHz 120 40 - 4 21 26 26 20 440 11 3 15 27 33 32 25 840 6 6 19 32 38 37 25 1000 3 8 21 35 41 38 25 1500 2 10 25 40 47 42 25 Filtered Connectors Capacitors . . . . . . . . Proprietary barium titanate . . . . . . . . . . . . . . . . ceramic formulations 30 pF Operating Temperature. . . . . . . -40C to +125C 40 120 Ground Plane. . . . . . . . . . . . Phosphor bronze, nickel plated Insertion Loss (dB) . . . . . . . . . . . . . *Heavier gold plating available upon request. 50 Insertion loss measured per MIL-STD-220, no load, 50 ohm source and load. Above data represents guaranteed minimum. SPECTRUM CONTROL INC. * 8031 Avonia Rd. * Fairview, PA 16415 * Phone: 814-474-2207 * Fax: 814-474-2208 * Web site: www.spectrumcontrol.com SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 142 *1566 PRINTER 121-170 v2 12/4/06 9:30 AM Page 22 Series 500 Low Profile Filtered Connectors Pin Contact (plug) Socket Contact (receptacle) Straight PC Mount Straight PC Mount E 1 E A C .329 (8.36) .050 (1.27) A C .025 (.64) sq. .312 (7.92) 1 .230 (5.84) .375 (9.53) .243 (6.17) .120.005 (3.05.13) dia. holes or optional #4-40 UNC .150 (3.81) .243 (6.17) B .243 (6.17) .120.005 (3.05.13) dia. holes or optional #4-40 UNC E D A C .483 (12.27) .329 (8.36) A C .050 .375 (1.27) (9.53) .312 (7.92) 1 .230 (5.84) B .105 (2.67) .120.005 (3.05.13) dia. holes or optional #4-40 UNC .025 (.64) sq. .243 (6.17) .318 (8.08) .430 (10.92) Size A B 9 1.213 (30.81) 0.984 0.666 (24.99) (16.92) 15 1.541 (39.14) 25 2.088 (53.04) .050 .375 (1.27) (9.53) .494 (12.55) .494 (12.55) Filtered Connectors .150 (3.81) E D .483 (12.27) C D E .243 (6.17) B .105 (2.67) .120.005 (3.05.13) dia. holes or optional #4-40 UNC .025 (.64) sq. .243 (6.17) .430 (10.92) B C D .318 (8.08) Size A 0.540 0.748 (13.72) (19.00) 9 1.213 (30.81) 0.984 0.642 (24.99) (16.31) 0.540 0.748 (13.72) (19.00) 1.312 0.994 (33.32) (25.25) 0.867 1.076 (22.02) (27.33) 15 1.541 (39.14) 1.312 0.970 (33.32) (24.64) 0.867 1.076 (22.02) (27.33) 1.852 1.534 (47.04) (38.96) 1.412 1.616 (35.86) (41.05) 25 2.088 (53.04) 1.852 1.510 (47.04) (38.35) 1.412 1.616 (35.86) (41.05) Standard Tolerance = .015 (0.38) E Standard Tolerance = .015 (0.38) Dimensions in inches (mm) 143 .375 (9.53) 90 PC Mount 90 PC Mount 1 .025 (.64) sq. .494 (12.55) .494 (12.55) B .050 (1.27) Dimensions in inches (mm) SPECTRUM CONTROL INC. * 8031 Avonia Rd. * Fairview, PA 16415 * Phone: 814-474-2207 * Fax: 814-474-2208 * Web site: www.spectrumcontrol.com SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 *1566 PRINTER 121-170 v2 12/4/06 9:30 AM Page 23 Series 500 Low Profile Filtered Connectors Ordering Information Example: 56-524-013-GBL 56 - 5 2 4 - This part number represents a Series 500 filtered D-sub connector with 25 contacts, socket to 90 PCB mount configuration. The filter has a capacitance value of 1000 pF and the connector includes a grounded board lock. 013 - For special needs or combinations of features, contact Spectrum Control engineering. GBL Series 500 Connectors Filtered D-sub Connectors Mounting or Hardware Options Shell Size/ Number of Contacts Contact Type/Termination 010 - 120 pF 2 - Pin to 90 PCB mount 3 - Socket to straight PCB mount 0 - 9 size 013 - 1000 pF 7 - Pin to straight PCB mount 2 - 25 size - - Standard connector F - RoHS compliant version GBL - Grounded board lock, includes 4-40 threads (available only on 90 PCB) 011 - 440 pF 012 - 840 pF 4 - Socket to 90 PCB mount 1 - 15 size TI - 4-40 threads on mounting flange (.120" (3.05mm) hole if not selected) Capacitance Value GBLF - Grounded board lock and ferrite slab, provides the enhanced performance of an (LC) filter (available only on 90 PCB) 014 - 1500 pF GBL Option Features I Snap-in retention to PC board, requires no hardware .105 (2.67) .025 (.64) sq. .318 (8.08) Ensures low ground impedance for superior filtering I 4-40 threads on mounting flange eliminate loose hardware .374 (9.50) Dimensions in inches (mm) Board Layout Typical Layout for .318" (8.08) Footprint B .109 (2.77) .375 (9.53) .054 (1.37) D .040 (1.02) .112 (2.84) .056 (1.42) .125 (3.18) Shell Size A B C D 9 .984 (24.99) .436 = 4 x .109 (11.07 = 4 x 2.77) .327 = 3 x .109 (8.31 = 3 x 2.77) .492 (12.50) 15 1.312 (33.32) .763 = 7 x .109 (19.38 = 7 x 2.77) .654 = 6 x .109 (16.61 = 6 x 2.77) .656 (16.66) 25 1.852 (47.04) 1.308 = 12 x .109 (33.22 = 12 x 2.77) 1.199 = 11 x .109 (30.45 = 11 x 2.77) .926 (23.52) Filtered Connectors #4-40 UNC-2B 2 holes Fits .125 (3.18) diameter hole I C A Board edge Dimensions in inches (mm) SPECTRUM CONTROL INC. * 8031 Avonia Rd. * Fairview, PA 16415 * Phone: 814-474-2207 * Fax: 814-474-2208 * Web site: www.spectrumcontrol.com SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 144 *1566 PRINTER 121-170 v2 12/4/06 9:30 AM Page 24 Typical Insertion Loss Series 600 Hi-Density Filtered Connectors 80 Insertion Loss (dB) 70 The miniaturization of electronic systems and subsystems is pushing designers to increase circuit densities within smaller packages. To address this growing need, Spectrum Control has developed a line of filtered Hi-Density D-subminiature connectors. This new line of connectors incorporates the high performance and reliable filtering of Spectrum's standard D-subs in the Hi-Density format. Capacitive Filter 60 50 19 40 30 18 20 16 10 0 15 10MHz 1MHz 100MHz Frequency 1GHz 5GHz Above curves represent application of proper grounding fundamentals, for assistance consult with Spectrum Control. Features I Connectors designed to MIL-C-24308 Capacitance values from 85 pF to 4000 pF I Filter type feed-thru C I Selectively specify and filter each contact position I Available in feed-thru capacitive configurations Mechanical Specifications: Same as Series 700 connectors, page 150. I Insertion loss measured per MIL-STD-220, no load, 50 ohm source and load. Electrical Specifications Current Rating . . . . 3 Amps RF Current Rating. . 0.3 Amps Contact Resistance . . 15 milliohms maximum UL Recognized. . . . . Under category of communication . . . . . . . . . . . . . . . . circuit accessories, File #E149046 Electrical Specifications: Hi-Density Connectors Capacitance Filter Designations Filter Circuits Value Tol. 3 dB Cut-off Frequency Max. (MHz) Minimum Insertion Loss - Decibels (dB) Dielectric Working WithVoltage DC 5 standing -55C to MHz Voltage +125C 10 MHz 20 MHz 50 MHz 100 MHz 200 MHz 500 MHz 1 GHz 2 GHz 5 GHz 15 85 pF 25% 60 300V 100V -- -- -- -- 1 6 16 21 22 20 16 180 pF 25% 28 300V 100V -- -- -- 1 8 10 18 25 26 24 18 1000 pF 25% 5.1 300V 100V -- 3 8 14 20 25 32 35 41 39 19 4000 pF 25% 1.3 300V 100V 8 13 19 26 31 37 45 48 52 47 Filtered Connectors C Filter designation "G" for grounded contacts, "I" for insulated (not filtered) contacts. Filter designation "O" for omitted contact and no hole in ground plane. Ordering Information Example: 56-605-015-LI 56 - 6 0 5 - 0 15 - LI Above data represents guaranteed minimum. This part number represents a Series 600 Hi-Density filtered D-Sub connector with 15 contacts, pin-socket adapter configuration. The FT filters have a capacitance value of 85 pF and the connector includes 4-40 locking inserts. D-Sub Connector Shell Size** 0 = 15 1 = 26 2 = 44 3 = 62 4 = 78 - Standard connector F - RoHS compliant version Hi-Density 145 Contact/Termination 1 - Pin to solder cup 2 - Pin to 90 PCB mount* 3 - Socket to PCB mount 4 - Socket to 90 PCB* mount 5 - Pin-socket adapter 7 - Pin to PCB mount Special Filter Designation 0 = All 15 - 85 pF FT positions 16 - 180 pF FT same 18 - 1,000 pF FT 9 = Special 19 - 4,000 pF FT loading 20 - Insulated contact ** Some shell sizes require minimum order quantity. Consult Spectrum Control for details. Note: VGA adapters also available. Consult factory Options LI = 4-40 inserts S = Solder dip tails 50G = gold GBL = Grounding board lock * Required on right angle parts SPECTRUM CONTROL INC. * 8031 Avonia Rd. * Fairview, PA 16415 * Phone: 814-474-2207 * Fax: 814-474-2208 * Web site: www.spectrumcontrol.com SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 *1566 PRINTER 121-170 v2 12/4/06 9:30 AM Page 25 Series 600 Hi-Density Filtered Connectors Pin/Socket Adapter A Size A B C D E F G 15 1.213 (30.81) .984 (24.99) .640 (16.26) .304 (7.72) .505 (12.83) .666 (16.92) .333 (8.46) 26 1.541 (39.14) 1.312 (33.32) .968 (24.59) .304 (7.72) .505 (12.83) .994 (25.25) .333 (8.46) 44 2.088 (53.04) 1.852 (47.04) 1.508 (38.30) .304 (7.72) .505 (12.83) 1.534 (38.96) .333 (8.46) C 1 E D .050 (1.27) .243 (6.17) B Socket End .238 (6.05) Socket Pin 10 62 2.729 (69.32) 2.500 (63.50) 2.156 (54.76) .304 (7.72) .505 (12.83) 2.182 (55.42) .333 (8.46) 78 2.635 (66.93) 2.406 (61.11) 2.062 (52.37) .416 (10.57) .615 (15.62) 2.079 (52.81) .420 (11.18) F 1 1.000 (25.40) G .153.005 (3.89.13) dia. holes 78 size has 4 rows of contacts Pin End Pin or Socket to Solder Cup, PCB Mount and 90 PCB Mount A B C D E F G A 10 10 D F 1 15 1.213 (30.81) .984 (24.99) .505 (12.83) .666 (16.92) .333 (8.46) .757 (19.23) 1 .420 (10.67) E C B 26 1.541 (39.14) 1.312 (33.32) .505 (12.83) .994 (25.25) .333 (8.46) 1.085 (27.56) 44 2.088 (53.04) 1.852 (47.04) .505 (12.83) 1.534 (38.96) .333 (8.46) 1.625 (41.28) .420 (10.67) 62 2.729 (69.32) 2.500 (63.50) .505 (12.83) 2.182 (55.42) .333 (8.46) 2.273 (57.73) .420 (10.67) 78 2.635 (66.93) 2.406 (61.11) .615 (15.62) 2.079 (52.81) .440 (11.18) 2.170 (55.12) .527 (13.39) .120.005 (3.05.13) dia. holes Mating Face .420 (10.67) Solder Cup .045 (1.14 ) .050 O.D. .026 (.66) (1.27) Min. I.D. .243 (6.17) P.C. Tail .025 (.64) dia. .050 (1.27) .238 (6.05) G .450 (11.43) Termination End .050 Boardlock (1.27) Centerline .243 (o.125 (6.17) thru x2) .660 (16.76) .400 (10.16) .125 (3.18) .358 (9.09) Solder Cup .150 (3.81) .125.020 (3.18.508) .100 (2.54) o.030 (.77) .350 (8.89) .100 (2.54) 90 PCB Mount .350 (8.89) .030 (7.62) Rd. .100 (2.54) .100 (2.54) 90 PCB Mount 78 line HD Dimensions in inches (mm) SPECTRUM CONTROL INC. * 8031 Avonia Rd. * Fairview, PA 16415 * Phone: 814-474-2207 * Fax: 814-474-2208 * Web site: www.spectrumcontrol.com SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 Filtered Connectors Size 146 *1566 PRINTER 121-170 v2 12/4/06 9:30 AM Page 26 Hi-Density Filtered Adapter for Telecommunications Within the telecommunications industry, it has been standard practice to use an adapter (male/female) type of EMI filtered connector as the interface between the switching system electronics and the premise wiring. These filtered adapters provide effective containment of EMI compared to either D-subminiature or 50-position "ribbon" contact type connectors. The following several factors have mandated the development of a new generation of filtered adapters. Special Requirements Mechanical Specifications Shell . . . . . . . . . . . . Zinc diecast, nickel plated . . . . . . . . . . . . . . . . 150 inches (3.81 m) min. Insulators . . . . . . . . Thermoplastic, UL94V-0 I Higher density wiring I The need for more contacts, usually a multiple of 16 Contacts . . . . . . . . . One-piece, screw machined . . . . . . . . . . . . . . . . Copper alloy, contact area plated . . . . . . . . . . . . . . . . 50 inches (1.27 m) gold . . . . . . . . . . . . . . . . over 50 inches (1.27 m) nickel I Higher reliability contact geometries Ground Plane . . . . . Brass, solder plated I Bellcore TR-NWT-001089 requirements Grounding Springs . . . . . . . . . . Beryllium copper, tin plated per . . . . . . . . . . . . . . . . MIL-T-10727 I I 1000 volts AC withstand for one minute I 2500 volts spike surge testing Improved flammable resistant plastic insulators Spectrum Control, in response to these unique requirements of the telecommunication industry, has developed a new Hi-Density filtered adapter. Features I Improved reliability compared to "ribbon" type connectors Capacitor. . . . . . . . . High performance ceramic . . . . . . . . . . . . . . . . feed-thru utilizing ultra low . . . . . . . . . . . . . . . . ESR design Electrical Specifications Rated Voltage. . . . . . 100 VDC Current Rating . . . . . . . . . . . 3 Amps DC Resistance . . . . . 15 milliohm max. Filtered Connectors I New ceramic technology and filter element construction to accept higher voltages Operating Temperature. . . . . . . -55C to +125C I Integral ground plane and one-piece diecast housing for the highest level of EMI integrity I More contacts/wires per square inch of panel space through Hi-Density arrangements 147 SPECTRUM CONTROL INC. * 8031 Avonia Rd. * Fairview, PA 16415 * Phone: 814-474-2207 * Fax: 814-474-2208 * Web site: www.spectrumcontrol.com SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 I 64 contact positions standard, with 78 positions available by request in any filter combination Dielectric Withstanding Voltage . . . . . . . . . . 1000 VRMS (FCC Part 68 test) Capacitance . . . . . . . 1000 pF, 25% Voltage Surge . . . . . meets 2500 volts surge (10/1000) . . . . . . . . . . . . . . . . (See Wave form figure on . . . . . . . . . . . . . . . . next page) *1566 PRINTER 121-170 v2 12/4/06 9:30 AM Page 27 Typical Insertion Loss Hi-Density Filtered Adapter for Telecommunications 40 Insertion Loss (dB) Filter Performance Minimum Insertion Loss 20 MHz 50 MHz 100 MHz 500 MHz 1 GHz 2 GHz 5 GHz 50 . . . . . . . . . . . . . . . . . . . . . . 7 dB . . . . . . . . . . . . . . . . . . . . . 14 dB . . . . . . . . . . . . . . . . . . . . . 20 dB . . . . . . . . . . . . . . . . . . . . . 32 dB . . . . . . . . . . . . . . . . . . . . . 35 dB . . . . . . . . . . . . . . . . . . . . . 41 dB . . . . . . . . . . . . . . . . . . . . . 39 dB 30 20 10 0 1MHz 10MHz 100MHz Frequency 1GHz 5GHz Above curves represent application of proper grounding fundamentals, for assistance consult with Spectrum Control. Insertion loss measured per MIL-STD-220, no load, 50 ohm source and load. Above data represents guaranteed minimum. Pulse Wave Form* (10 x 1000) Part Number for Ordering: #56-645-002 Peak Pulse Voltage, % Vpp .050 (1.27) .243 (6.17) .238 (6.05) 1.000 (25.40) #4-40 UNC - 2B Locking Inserts 4 plcs. Side View 21 2 2.079 (52.81) Test Waveform Parameters tr = 10sec tp = 1000s tr .520 (13.21) 100 Peak Value - Vpp Hall Value - 50 10 x 1000 Waveform et 0 0 1 tp 38 19 Vpp 2 2 3 4 t - - Time - - msec 5 6 * Reference Bellcore TR-NWT-1089, Vpp = 1000V 41 60 77 58 Pin Face Position numbers shown for reference 2.635 (66.93) 2.062 (52.37) .082 (2.08) .190 (4.83) .190 (4.83) .615 (15.62) .041 (1.04) .0475 (1.21) Filtered Connectors .440 (11.18) .416 (10.57) .095 (2.41) 2.406 (61.11) Socket Face Dimensions in inches (mm) SPECTRUM CONTROL INC. * 8031 Avonia Rd. * Fairview, PA 16415 * Phone: 814-474-2207 * Fax: 814-474-2208 * Web site: www.spectrumcontrol.com SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 148 *1566 PRINTER 121-170 v2 12/4/06 9:30 AM Page 28 Typical Insertion Loss 80 70 Insertion Loss (dB) Series 700 High Performance Filtered Connectors Filter Selection K 50 C 40 30 A 20 J 10 0 Spectrum Control Series 700 connectors offer the highest performance filtering for all types of professional applications. 1MHz 10MHz 100MHz Frequency 1GHz 5GHz 1GHz 5GHz 80 Features Available in 9, 15, 25, 37 and 50 shell sizes I Variety of termination configurations including right angle and straight PCB for both pin and socket contact and as an adapter Insertion Loss (dB) 70 I I E Pi Filter 60 Capacitive and Pi type filters in a full range of capacitance values Capacitive Filter 60 50 D 40 B 30 L 20 F N 10 The catalog data for this series is presented in order of shell size, and grouped by pin and socket contacts. Part numbers must be selected from the tables within the series section. 0 1MHz 10MHz 100MHz Frequency Above curves represent application of proper grounding fundamentals, for assistance consult with Spectrum Control. Insertion loss measured per MIL-STD-220, no load, 50ohm source and load. Electrical Specifications: High Performance Connectors Capacitance Filtered Connectors Filter Designations Filter Circuits Value Tol. 3 dB Cut-off Frequency Max. (MHz) Minimum Insertion Loss - Decibels (dB) Dielectric Working WithVoltage DC 5 standing -55C to MHz Voltage +125C 10 MHz 20 MHz 50 MHz 100 MHz 200 MHz 500 MHz 1 GHz 2 GHz 5 GHz J 100 pF +100 -0% 32 300V 100V -- -- -- 2 6 11 27 40 43 40 A 310 pF 17 300V 100V -- -- 3 7 13 21 36 43 50 45 1000 pF +100 -0% 3.2 300V 100V -- 5 9 19 30 43 62 70 68 63 K 2500 pF +100 -0% 1.3 150V 50V 8 13 18 33 45 58 73 78 70 65 E 4000 pF +100 -0% 0.8 150V 50V 8 13 20 35 48 61 76 80 70 65 C Pi 20% N 375 pF 20% 14 600V 200V -- -- 2 7 13 20 29 35 30 29 L 500 pF 20% 10.6 600V 200V -- -- 3 10 15 22 31 37 33 31 830 pF 20% 6.4 600V 200V -- 4 9 16 22 28 35 39 38 36 F C B 1000 pF +100 -0% 3.2 600V 200V -- 5 10 17 23 30 37 43 44 42 D 5000 pF +100 -0% 0.64 300V 100V 10 16 22 30 35 41 50 52 52 50 Filter designation "G" for grounded contacts, "I" for insulated (not filtered) contacts. Filter designation "O" for omitted contact and no hole in ground plane. 149 Above data represents guaranteed minimum. SPECTRUM CONTROL INC. * 8031 Avonia Rd. * Fairview, PA 16415 * Phone: 814-474-2207 * Fax: 814-474-2208 * Web site: www.spectrumcontrol.com SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 *1566 PRINTER 121-170 v2 12/4/06 9:30 AM Page 29 Series 700 Specifications and Connector Ordering Shell . . . . . . . . . . . . Zinc diecast, nickel plated . . . . . . . . . . . . . . . . 150 inches (3.81 m) min. Insulators . . . . . . . . Glass-filled polyester, . . . . . . . . . . . . . . . . flammability UL94V-0 Ordering Your Connector STEP 1: SELECTING THE FILTER I Using the insert loss graphs on page 149 determine which filters provide the required attenuation at the troublesome frequency, while not affecting the signal frequency by more than 3 to 6 dB. I Choose the filter type, either feed-thru capacitor or Pi. The Pi is generally considered better due to its superior high frequency performance and steeper curve. The feed-thru capacitor is lower cost. Ground Plane . . . . . Brass, solder plated I Select capacitance value. Grounding Springs . . . . . . . . . . Beryllium copper, tin plated per . . . . . . . . . . . . . . . . MIL-T-10727 I Note the Spectrum letter designation for the filter chosen from the table on page 149. Pin Contacts . . . . . . Copper alloy, 15 inches . . . . . . . . . . . . . . . . (0.38 m) gold plated * over nickel Socket Contacts . . . . Copper alloy, 30 inches . . . . . . . . . . . . . . . . (0.76 m) gold plated * over nickel . . . . . . . . . . . . . . . . * Heavier gold plating available upon request. . . . . . . . . . . . . . . . . . . . . . . See pg. 169: Connector Options Terminations . . . . . . Gold flash for PCB mount and solder . . . . . . . . . . . . . . . . cups. Solder dipped also available. Operating Temperature. . . . . . . -55C to +125C STEP 2: SELECTING THE CONNECTOR I Capacitors . . . . . . . . Proprietary barium titanate . . . . . . . . . . . . . . . . ceramic formulations Turn to the appropriate size section. (9, 15, 25, 37, 50) I Choose either pin contacts (plug) or socket contacts (receptacle). Electrical Specifications I Choose the required termination type. I From the table on the appropriate connector page, using the filter letter designation chosen in step 1 above, select the part number. Current Rating . . . . 5 Amps R.F. Current Rating . . . . . . . . . . . 0.3 Amps Contact Resistance . . . . . . . . 10 milliohms maximum UL Recognized. . . . . Under category of communication . . . . . . . . . . . . . . . . circuit accessories, File #E149046 Inductance on PI Filters . . . . . . . . . ~ 860 nH between 100 kHz and 1 MHz Solder cups accept up to a 20 gauge wire Note: For additional mechanical, electrical, and environmental specifications, refer to page 201. STEP 3: SPECIFYING OPTIONS I Refer to page 172 for special options including heavy gold plating, 4-40 mounting threads, grounding brackets, hardware, and others. I Most options are available within the standard lead times. I Some options require a part number suffix, while other combinations may require factory assistance for part number assignment. If a suffix is shown, add it to your selected part number. If more than one option is needed, consult with factory for part number assignment. SPECTRUM CONTROL INC. * 8031 Avonia Rd. * Fairview, PA 16415 * Phone: 814-474-2207 * Fax: 814-474-2208 * Web site: www.spectrumcontrol.com SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 Filtered Connectors Mechanical Specifications 150 *1566 PRINTER 121-170 v2 9 Shell Size 12/4/06 9:30 AM Page 30 Series 700 Pin Contact Printed Circuit Board Mount EMI Filter Spectrum Part Number Filter Designation** Cap. Value 56-701-001 A 310 pF Pi 56-701-002 B 1000 pF C 56-701-003 C 1000 pF Pi 56-701-004 D 5000 pF C 56-701-005 E 4000 pF Pi 56-701-028 F 830 pF C 56-701-029 J 100 pF Pi 56-701-030 K 2500 pF Pi 56-701-047 N 375 pF C 56-701-086 L 500 pF C Mating Face Side View Termination Face Filtered Connectors Printed Circuit Board Right Angle Mount Spectrum Part Number EMI Filter Filter Designation** Cap. Value * 56-702-001 A 310 pF Pi 56-702-002 B 1000 pF C * 56-702-003 C 1000 pF Pi 56-702-004 D 5000 pF C * 56-702-005 E 4000 pF Pi 56-702-007 F 830 pF C 56-702-008 J 100 pF Pi 56-702-009 K 2500 pF Pi 56-702-013 N 375 pF C * 56-702-033 L 500 pF C * May be available from distributor stock. ** See page 149 for filter performance. Standard Tolerance = .005 except where noted, = .015 151 Mating Face Termination Face Bottom View Side View Dimensions in inches (mm) SPECTRUM CONTROL INC. * 8031 Avonia Rd. * Fairview, PA 16415 * Phone: 814-474-2207 * Fax: 814-474-2208 * Web site: www.spectrumcontrol.com SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 *1566 PRINTER 121-170 v2 9 Shell Size 12/4/06 9:30 AM Page 31 Series 700 Pin Contact Solderless Wire Wrap Spectrum Part Number EMI Filter Select one L .500 L .375 L .250 Filter Desig.** Cap. Value 56-701 -006 -022 -017 A 310 pF Pi 56-701 -007 -023 -018 B 1000 pF C 56-701 -008 -024 -019 C 1000 pF Pi 56-701 -009 -025 -020 D 5000 pF C 56-701 -010 -026 -021 E 4000 pF Pi 56-701 -037 -034 -031 F 830 pF C 56-701 -038 -035 -032 J 100 pF Pi 56-701 -039 -036 -033 K 2500 pF Pi 56-701 -050 -049 -048 N 375 pF C Mating Face Side View Termination Face Solder Cup Termination EMI Filter Filter Designation** Cap. Value * 56-701-011 A 310 pF Pi * 56-701-012 B 1000 pF C * 56-701-013 C 1000 pF Pi * 56-701-014 D 5000 pF C * 56-701-015 E 4000 pF Pi * 56-701-040 F 830 pF C 56-701-041 J 100 pF Pi 56-701-042 K 2500 pF Pi 56-701-081 N 375 pF C 56-701-087 L 500 pF C * May be available from distributor stock. ** See page 149 for filter performance. Standard Tolerance = .005 except where noted, = .015 Filtered Connectors Spectrum Part Number Mating Face Side View Termination Face Dimensions in inches (mm) SPECTRUM CONTROL INC. * 8031 Avonia Rd. * Fairview, PA 16415 * Phone: 814-474-2207 * Fax: 814-474-2208 * Web site: www.spectrumcontrol.com SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 152 *1566 PRINTER 121-170 v2 9 Shell Size 12/4/06 9:30 AM Page 32 Series 700 Socket Contact Printed Circuit Board Mount EMI Filter Spectrum Part Number Filter Designation** Cap. Value 56-703-001 A 310 pF Pi 56-703-002 B 1000 pF C 56-703-003 C 1000 pF Pi 56-703-004 D 5000 pF C 56-703-005 E 4000 pF Pi 56-703-022 F 830 pF C 56-703-023 J 100 pF Pi 56-703-024 K 2500 pF Pi 56-703-036 N 375 pF C 56-703-047 L 500 pF C Mating Face Side View Termination Face Filtered Connectors Printed Circuit Board Right Angle Mount EMI Filter Spectrum Part Number Filter Designation** Cap. Value 56-704-001 A 310 pF Pi 56-704-002 B 1000 pF C * 56-704-003 C 1000 pF Pi 56-704-004 D 5000 pF C * 56-704-005 E 4000 pF Pi 56-704-007 F 830 pF C 56-704-008 J 100 pF Pi 56-704-009 K 2500 pF Pi 56-704-018 N 375 pF C 56-704-035 L 500 pF C * May be available from distributor stock. ** See page 149 for filter performance. Standard Tolerance = .005 except where noted, = .015 153 Termination Face Mating Face Bottom View Side View Dimensions in inches (mm) SPECTRUM CONTROL INC. * 8031 Avonia Rd. * Fairview, PA 16415 * Phone: 814-474-2207 * Fax: 814-474-2208 * Web site: www.spectrumcontrol.com SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 *1566 PRINTER 121-170 v2 9 Shell Size 12/4/06 9:30 AM Page 33 Series 700 Socket Contact & Pin/Socket Adapter Solderless Wire Wrap Spectrum Part Number EMI Filter Select one 56-703 56-703 56-703 56-703 * 56-703 56-703 56-703 56-703 56-703 L .500 -006 -007 -008 -009 -010 -031 -032 -033 -039 L L .375 .250 -016 -011 -017 -012 -018 -013 -019 -014 -020 * -015 -028 -025 -029 -026 -030 -027 -038 -037 Filter Desig.** A B C D E F J K N Cap. Value 310 1000 1000 5000 4000 830 100 2500 375 pF Pi pF C pF Pi pF C pF Pi pF C pF Pi pF Pi pF C Mating Face Termination Face Side View Solder Cup Termination EMI Filter Filter Designation** * 56-706-001 56-706-002 * 56-706-003 56-706-004 * 56-706-005 56-706-006 56-706-007 * 56-706-008 56-706-009 56-706-017 A B C D E F J K N L Cap. Value 310 1000 1000 5000 4000 830 100 2500 375 500 pF Pi pF C pF Pi pF C pF Pi pF C pF Pi pF Pi pF C pF C Mating Face Termination Face Side View Filtered Connectors Spectrum Part Number Pin/Socket Adapter EMI Filter Spectrum Part Number Filter Designation** * 56-705-001 56-705-002 * 56-705-003 56-705-004 * 56-705-005 * 56-705-008 56-705-009 56-705-010 56-705-026 56-705-049 A B C D E F J K N L Cap. Value 310 1000 1000 5000 4000 830 100 2500 375 500 pF Pi pF C pF Pi pF C pF Pi pF C pF Pi pF Pi pF C pF C Socket Face Also available through Spectrum Control's authorized European distributors/agents. * May be available from distributor stock. ** See page 149 for filter performance. Standard Tolerance = .005 except where noted, = .015 Pin Face Side View Dimensions in inches (mm) SPECTRUM CONTROL INC. * 8031 Avonia Rd. * Fairview, PA 16415 * Phone: 814-474-2207 * Fax: 814-474-2208 * Web site: www.spectrumcontrol.com SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 154 *1566 PRINTER 121-170 v2 15 Shell Size 12/4/06 9:30 AM Page 34 Series 700 Pin Contact Printed Circuit Board Mount EMI Filter Spectrum Part Number Filter Designation** Cap. Value 56-711-001 A 310 pF Pi 56-711-002 B 1000 pF C 56-711-003 C 1000 pF Pi 56-711-004 D 5000 pF C 56-711-005 E 4000 pF Pi 56-711-028 F 830 pF C 56-711-029 J 100 pF Pi 56-711-030 K 2500 pF Pi 56-711-048 N 375 pF C 56-711-088 L 500 pF C Mating Face Side View Termination Face Filtered Connectors Printed Circuit Board Right Angle Mount Spectrum Part Number EMI Filter Filter Designation** Cap. Value * 56-712-001 A 310 pF Pi 56-712-002 B 1000 pF C * 56-712-003 C 1000 pF Pi 56-712-004 D 5000 pF C * 56-712-005 E 4000 pF Pi * 56-712-007 F 830 pF C 56-712-008 J 100 pF Pi 56-712-009 K 2500 pF Pi 56-712-017 N 375 pF C 56-712-039 L 500 pF C * May be available from distributor stock. ** See page 149 for filter performance. Standard Tolerance = .005 except where noted, = .015 155 Mating Face Termination Face Bottom View Side View Dimensions in inches (mm) SPECTRUM CONTROL INC. * 8031 Avonia Rd. * Fairview, PA 16415 * Phone: 814-474-2207 * Fax: 814-474-2208 * Web site: www.spectrumcontrol.com SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 *1566 PRINTER 121-170 v2 15 Shell Size 12/4/06 9:30 AM Page 35 Series 700 Pin Contact Solderless Wire Wrap Spectrum Part Number EMI Filter Select one L .500 L .375 L .250 Filter Desig.** Cap. Value 56-711 -006 -023 -018 A 310 pF Pi 56-711 -007 -024 -019 B 1000 pF C 56-711 -008 -025 -020 C 1000 pF Pi 56-711 -009 -026 -021 D 5000 pF C 56-711 -010 -027 -022 E 4000 pF Pi 56-711 -037 -034 -031 F 830 pF C 56-711 -038 -035 -032 J 100 pF Pi 56-711 -039 -036 -033 K 2500 pF Pi 56-711 -051 -050 -049 N 375 pF C Mating Face Side View Termination Face Solder Cup Termination EMI Filter Filter Designation** Cap. Value * 56-711-011 A 310 pF Pi 56-711-012 B 1000 pF C * 56-711-013 C 1000 pF Pi 56-711-014 D 5000 pF C * 56-711-015 E 4000 pF Pi * 56-711-040 F 830 pF C 56-711-041 J 100 pF Pi 56-711-042 K 2500 pF Pi 56-711-085 N 375 pF C 56-711-086 L 500 pF C * May be available from distributor stock. ** See page 149 for filter performance. Standard Tolerance = .005 except where noted, = .015 Filtered Connectors Spectrum Part Number Mating Face Side View Termination Face Dimensions in inches (mm) SPECTRUM CONTROL INC. * 8031 Avonia Rd. * Fairview, PA 16415 * Phone: 814-474-2207 * Fax: 814-474-2208 * Web site: www.spectrumcontrol.com SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 156 *1566 PRINTER 121-170 v2 15 Shell Size 12/4/06 9:30 AM Page 36 Series 700 Socket Contact Printed Circuit Board Mount EMI Filter Spectrum Part Number Filter Designation** Cap. Value 56-713-001 A 310 pF Pi 56-713-002 B 1000 pF C 56-713-003 C 1000 pF Pi 56-713-004 D 5000 pF C 56-713-005 E 4000 pF Pi 56-713-021 F 830 pF C 56-713-022 J 100 pF Pi 56-713-023 K 2500 pF Pi 56-713-037 N 375 pF C 56-713-045 L 500 pF C Mating Face Side View Termination Face Filtered Connectors Printed Circuit Board Right Angle Mount Spectrum Part Number EMI Filter Filter Designation** Cap. Value * 56-714-001 A 310 pF Pi 56-714-002 B 1000 pF C * 56-714-003 C 1000 pF Pi 56-714-004 D 5000 pF C * 56-714-005 E 4000 pF Pi * 56-714-006 F 830 pF C 56-714-007 J 100 pF Pi 56-714-008 K 2500 pF Pi 56-714-017 N 375 pF C 56-714-031 L 500 pF C * May be available from distributor stock. ** See page 149 for filter performance. Standard Tolerance = .005 except where noted, = .015 157 Mating Face Termination Face Bottom View Side View Dimensions in inches (mm) SPECTRUM CONTROL INC. * 8031 Avonia Rd. * Fairview, PA 16415 * Phone: 814-474-2207 * Fax: 814-474-2208 * Web site: www.spectrumcontrol.com SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 *1566 PRINTER 121-170 v2 15 Shell Size 12/4/06 9:30 AM Page 37 Series 700 Socket Contact & Pin/Socket Adapter Solderless Wire Wrap Spectrum Part Number EMI Filter Select one 56-713 56-713 56-713 56-713 56-713 56-713 56-713 56-713 56-713 L .500 -006 -007 -008 -009 -010 -030 -031 -032 -040 L .375 -016 -017 -018 -019 -020 -027 -028 -029 -039 L .250 -011 -012 -013 -014 -015 -024 -025 -026 -038 Filter Desig.** A B C D E F J K N Cap. Value 310 1000 1000 5000 4000 830 100 2500 375 pF Pi pF C pF Pi pF C pF Pi pF C pF Pi pF Pi pF C Mating Face Termination Face Side View Solder Cup Termination EMI Filter Filter Designation** * 56-716-001 56-716-002 * 56-716-003 56-716-004 * 56-716-005 56-716-006 56-716-007 * 56-716-008 56-716-009 56-716-013 A B C D E F J K N L Cap. Value 310 1000 1000 5000 4000 830 100 2500 375 500 pF Pi pF C pF Pi pF C pF Pi pF C pF Pi pF Pi pF C pF C Mating Face Termination Face Side View Filtered Connectors Spectrum Part Number Pin/Socket Adapter Spectrum Part Number EMI Filter Filter Designation** * 56-715-001 56-715-002 * 56-715-003 56-715-004 * 56-715-005 56-715-007 56-715-008 56-715-009 56-715-015 56-715-040 A B C D E F J K N L Cap. Value 310 1000 1000 5000 4000 830 100 2500 375 500 pF Pi pF C pF Pi pF C pF Pi pF C pF Pi pF Pi pF C pF C Socket Face Also available through Spectrum Control's authorized European distributors/agents. * May be available from distributor stock. ** See page 149 for filter performance. Standard Tolerance = .005 except where noted, = .015 Pin Face Side View Dimensions in inches (mm) SPECTRUM CONTROL INC. * 8031 Avonia Rd. * Fairview, PA 16415 * Phone: 814-474-2207 * Fax: 814-474-2208 * Web site: www.spectrumcontrol.com SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 158 *1566 PRINTER 121-170 v2 25 Shell Size 12/4/06 9:30 AM Page 38 Series 700 Pin Contact Printed Circuit Board Mount EMI Filter Spectrum Part Number Filter Designation** Cap. Value 56-721-001 A 310 pF Pi 56-721-002 B 1000 pF C 56-721-003 C 1000 pF Pi 56-721-004 D 5000 pF C 56-721-005 E 4000 pF Pi 56-721-033 F 830 pF C 56-721-034 J 100 pF Pi 56-721-035 K 2500 pF Pi 56-721-063 N 375 pF C 56-721-111 L 500 pF C Mating Face Side View Termination Face Filtered Connectors Printed Circuit Board Right Angle Mount Spectrum Part Number EMI Filter Filter Designation** Cap. Value * 56-722-001 A 310 pF Pi 56-722-002 B 1000 pF C * 56-722-003 C 1000 pF Pi 56-722-004 D 5000 pF C * 56-722-005 E 4000 pF Pi * 56-722-008 F 830 pF C 56-722-009 J 100 pF Pi 56-722-010 K 2500 pF Pi 56-722-027 N 375 pF C 56-722-060 L 500 pF C * May be available from distributor stock. ** See page 149 for filter performance. Standard Tolerance = .005 except where noted, = .015 159 Termination Face Mating Face Bottom View Side View Dimensions in inches (mm) SPECTRUM CONTROL INC. * 8031 Avonia Rd. * Fairview, PA 16415 * Phone: 814-474-2207 * Fax: 814-474-2208 * Web site: www.spectrumcontrol.com SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 *1566 PRINTER 121-170 v2 25 Shell Size 12/4/06 9:30 AM Page 39 Series 700 Pin Contact Solderless Wire Wrap Spectrum Part Number EMI Filter Select one L .500 L .375 L .250 Filter Desig.** Cap. Value 56-721 -006 -028 -024 A 310 pF Pi 56-721 -007 -029 -025 B 1000 pF C 56-721 -008 -030 -026 C 1000 pF Pi 56-721 -009 -031 -022 D 5000 pF C 56-721 -010 -032 -027 E 4000 pF Pi 56-721 -042 -039 -036 F 830 pF C 56-721 -043 -040 -037 J 100 pF Pi 56-721 -044 -041 -038 K 2500 pF Pi 56-721 -066 -065 -064 N 375 pF C Mating Face Side View Termination Face Solder Cup Termination EMI Filter Filter Designation** Cap. Value * 56-721-011 A 310 pF Pi * 56-721-012 B 1000 pF C * 56-721-013 C 1000 pF Pi 56-721-014 D 5000 pF C * 56-721-015 E 4000 pF Pi * 56-721-045 F 830 pF C 56-721-046 J 100 pF Pi 56-721-047 K 2500 pF Pi 56-721-070 N 375 pF C 56-721-112 L 500 pF C Filtered Connectors Spectrum Part Number Mating Face Side View Termination Face * May be available from distributor stock. ** See page 149 for filter performance. Standard Tolerance = .005 except where noted, = .015 Dimensions in inches (mm) SPECTRUM CONTROL INC. * 8031 Avonia Rd. * Fairview, PA 16415 * Phone: 814-474-2207 * Fax: 814-474-2208 * Web site: www.spectrumcontrol.com SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 160 *1566 PRINTER 121-170 v2 25 Shell Size 12/4/06 9:30 AM Page 40 Series 700 Socket Contact Printed Circuit Board Mount EMI Filter Spectrum Part Number Filter Designation** Cap. Value 56-723-001 A 310 pF Pi 56-723-002 B 1000 pF C 56-723-003 C 1000 pF Pi 56-723-004 D 5000 pF C 56-723-005 E 4000 pF Pi 56-723-023 F 830 pF C 56-723-024 J 100 pF Pi 56-723-025 K 2500 pF Pi 56-723-045 N 375 pF C 56-723-069 L 500 pF C Mating Face Side View Termination Face Filtered Connectors Printed Circuit Board Right Angle Mount Spectrum Part Number EMI Filter Filter Designation** Cap. Value * 56-724-001 A 310 pF Pi 56-724-002 B 1000 pF C * 56-724-003 C 1000 pF Pi 56-724-004 D 5000 pF C * 56-724-005 E 4000 pF Pi * 56-724-008 F 830 pF C 56-724-009 J 100 pF Pi 56-724-010 K 2500 pF Pi 56-724-021 N 375 pF C 56-724-046 L 500 pF C * May be available from distributor stock. ** See page 149 for filter performance. Standard Tolerance = .005 except where noted, = .015 161 Termination Face Mating Face Bottom View Side View Dimensions in inches (mm) SPECTRUM CONTROL INC. * 8031 Avonia Rd. * Fairview, PA 16415 * Phone: 814-474-2207 * Fax: 814-474-2208 * Web site: www.spectrumcontrol.com SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 *1566 PRINTER 121-170 v2 25 Shell Size 12/4/06 9:30 AM Page 41 Series 700 Socket Contact & Pin/Socket Adapter Solderless Wire Wrap Spectrum Part Number EMI Filter Select one * 56-723 56-723 * 56-723 56-723 * 56-723 * 56-723 56-723 56-723 56-723 L .500 -006 -007 -008 -009 -010 -032 -033 -034 -048 L .375 -017 -018 -019 -020 -021 -029 -030 -031 -047 L .250 * -012 -013 * -014 -015 * -016 * -026 -027 -028 -046 Filter Desig.** A B C D E F J K N Cap. Value 310 1000 1000 5000 4000 830 100 2500 375 pF Pi pF C pF Pi pF C pF Pi pF C pF Pi pF Pi pF C Mating Face Termination Face Side View Solder Cup Termination EMI Filter Filter Designation** * 56-726-001 56-726-002 * 56-726-003 56-726-004 * 56-726-005 56-726-006 56-726-007 * 56-726-008 56-726-009 56-726-021 A B C D E F J K N L Cap. Value 310 1000 1000 5000 4000 830 100 2500 375 500 pF Pi pF C pF Pi pF C pF Pi pF C pF Pi pF Pi pF C pF C Mating Face Termination Face Side View Filtered Connectors Spectrum Part Number Pin/Socket Adapter Spectrum Part Number EMI Filter Filter Designation** * 56-725-001 56-725-002 * 56-725-003 56-725-004 * 56-725-005 * 56-725-019 56-725-020 * 56-725-021 56-725-064 56-725-073 A B C D E F J K N L Cap. Value 310 1000 1000 5000 4000 830 100 2500 375 500 pF Pi pF C pF Pi pF C pF Pi pF C pF Pi pF Pi pF C pF C Socket Face Also available through Spectrum Control's authorized European distributors/agents. Pin Face Side View Dimensions in inches (mm) * May be available from distributor stock. ** See page 149 for filter performance. Standard Tolerance = .005 except where noted, = .015 SPECTRUM CONTROL INC. * 8031 Avonia Rd. * Fairview, PA 16415 * Phone: 814-474-2207 * Fax: 814-474-2208 * Web site: www.spectrumcontrol.com SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 162 *1566 PRINTER 121-170 v2 37 Shell Size 12/4/06 9:31 AM Page 42 Series 700 Pin Contact Printed Circuit Board Mount EMI Filter Spectrum Part Number Filter Designation** Cap. Value 56-731-001 A 310 pF Pi 56-731-002 B 1000 pF C 56-731-003 C 1000 pF Pi 56-731-004 D 5000 pF C 56-731-005 E 4000 pF Pi 56-731-028 F 830 pF C 56-731-029 J 100 pF Pi 56-731-030 K 2500 pF Pi 56-731-048 N 375 pF C 56-731-076 L 500 pF C Mating Face Termination Face Side View Filtered Connectors Printed Circuit Board Right Angle Mount EMI Filter Spectrum Part Number Filter Designation** Cap. Value 56-732-001 A 310 pF Pi 56-732-002 B 1000 pF C * 56-732-003 C 1000 pF Pi 56-732-004 D 5000 pF C * 56-732-005 E 4000 pF Pi 56-732-006 F 830 pF C 56-732-007 J 100 pF Pi 56-732-008 K 2500 pF Pi 56-732-009 N 375 pF C 56-732-023 L 500 pF C * May be available from distributor stock. ** See page 149 for filter performance. Standard Tolerance = .005 except where noted, = .015 163 Mating Face Termination Face Side View Bottom View Dimensions in inches (mm) SPECTRUM CONTROL INC. * 8031 Avonia Rd. * Fairview, PA 16415 * Phone: 814-474-2207 * Fax: 814-474-2208 * Web site: www.spectrumcontrol.com SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 *1566 PRINTER 121-170 v2 37 Shell Size 12/4/06 9:31 AM Page 43 Series 700 Pin Contact Solderless Wire Wrap Spectrum Part Number EMI Filter Select one L .500 L .375 L .250 Filter Desig.** Cap. Value 56-731 -006 -023 -018 A 310 pF Pi 56-731 -007 -024 -019 B 1000 pF C 56-731 -008 -025 -020 C 1000 pF Pi 56-731 -009 -026 -021 D 5000 pF C 56-731 -010 -027 -022 E 4000 pF Pi 56-731 -037 -034 -031 F 830 pF C 56-731 -038 -035 -032 J 100 pF Pi 56-731 -039 -036 -033 K 2500 pF Pi 56-731 -051 -050 -049 N 375 pF C Mating Face Side View Termination Face Solder Cup Termination EMI Filter Filter Designation** Cap. Value * 56-731-011 A 310 pF Pi 56-731-012 B 1000 pF C * 56-731-013 C 1000 pF Pi 56-731-014 D 5000 pF C * 56-731-015 E 4000 pF Pi * 56-731-040 F 830 pF C 56-731-041 J 100 pF Pi 56-731-042 K 2500 pF Pi 56-731-060 N 375 pF C 56-731-077 L 500 pF C * May be available from distributor stock. ** See page 149 for filter performance. Standard Tolerance = .005 except where noted, = .015 Filtered Connectors Spectrum Part Number Mating Face Side View Termination Face Dimensions in inches (mm) SPECTRUM CONTROL INC. * 8031 Avonia Rd. * Fairview, PA 16415 * Phone: 814-474-2207 * Fax: 814-474-2208 * Web site: www.spectrumcontrol.com SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 164 *1566 PRINTER 121-170 v2 37 Shell Size 12/4/06 9:31 AM Page 44 Series 700 Socket Contact Printed Circuit Board Mount EMI Filter Spectrum Part Number Filter Designation** Cap. Value 56-733-001 A 310 pF Pi 56-733-002 B 1000 pF C 56-733-003 C 1000 pF Pi 56-733-004 D 5000 pF C 56-733-005 E 4000 pF Pi 56-733-021 F 830 pF C 56-733-022 J 100 pF Pi 56-733-023 K 2500 pF Pi 56-733-035 N 375 pF C 56-733-046 L 500 pF C Mating Face Side View Termination Face Filtered Connectors Printed Circuit Board Right Angle Mount EMI Filter Spectrum Part Number Filter Designation** Cap. Value 56-734-001 A 310 pF Pi 56-734-002 B 1000 pF C 56-734-003 C 1000 pF Pi 56-734-004 D 5000 pF C 56-734-005 E 4000 pF Pi 56-734-006 F 830 pF C 56-734-007 J 100 pF Pi 56-734-008 K 2500 pF Pi 56-734-012 N 375 pF C 56-734-021 L 500 pF C * May be available from distributor stock. ** See page 149 for filter performance. Standard Tolerance = .005 except where noted, = .015 165 Mating Face Termination Face Side View Bottom View Dimensions in inches (mm) SPECTRUM CONTROL INC. * 8031 Avonia Rd. * Fairview, PA 16415 * Phone: 814-474-2207 * Fax: 814-474-2208 * Web site: www.spectrumcontrol.com SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 *1566 PRINTER 121-170 v2 37 Shell Size 12/4/06 9:31 AM Page 45 Series 700 Socket Contact & Pin/Socket Adapter Solderless Wire Wrap Spectrum Part Number EMI Filter Select one * 56-733 56-733 56-733 56-733 56-733 56-733 56-733 56-733 56-733 L .500 -006 -007 -008 -009 -010 -030 -031 -032 -038 L L .375 .250 -016 * -011 -017 -012 -018 -013 -019 -014 -020 -015 -027 -024 -028 -025 -029 -026 -037 -036 Filter Desig.** A B C D E F J K N Cap. Value 310 1000 1000 5000 4000 830 100 2500 375 pF Pi pF C pF Pi pF C pF Pi pF C pF Pi pF Pi pF C Mating Face Side View Termination Face Solder Cup Termination EMI Filter Filter Designation** * 56-736-001 56-736-002 * 56-736-003 56-736-004 * 56-736-005 56-736-006 56-736-007 * 56-736-008 56-736-009 56-736-015 A B C D E F J K N L Cap. Value 310 1000 1000 5000 4000 830 100 2500 375 500 pF Pi pF C pF Pi pF C pF Pi pF C pF Pi pF Pi pF C pF C Mating Face Side View Termination Face Filtered Connectors Spectrum Part Number Pin/Socket Adapter Spectrum Part Number EMI Filter Filter Designation** * 56-735-001 56-735-002 * 56-735-003 56-735-004 * 56-735-005 * 56-735-008 56-735-009 56-735-010 56-735-025 56-735-034 A B C D E F J K N L Cap. Value 310 1000 1000 5000 4000 830 100 2500 375 500 pF Pi pF C pF Pi pF C pF Pi pF C pF Pi pF Pi pF C pF C Socket Face Side View Pin Face Also available through Spectrum Control's authorized European distributors/agents. * May be available from distributor stock. ** See page 149 for filter performance. Standard Tolerance = .005 except where noted, = .015 Dimensions in inches (mm) SPECTRUM CONTROL INC. * 8031 Avonia Rd. * Fairview, PA 16415 * Phone: 814-474-2207 * Fax: 814-474-2208 * Web site: www.spectrumcontrol.com SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 166 *1566 PRINTER 121-170 v2 50 Shell Size 12/4/06 9:31 AM Page 46 Series 700 Pin Contact Printed Circuit Board Mount EMI Filter Spectrum Part Number Filter Designation** Cap. Value 56-741-001 A 310 pF Pi 56-741-002 B 1000 pF C 56-741-003 C 1000 pF Pi 56-741-004 D 5000 pF C 56-741-005 E 4000 pF Pi 56-741-027 F 830 pF C 56-741-028 J 100 pF Pi 56-741-029 K 2500 pF Pi 56-741-042 N 375 pF C 56-741-066 L 500 pF C Mating Face Side View Termination Face Filtered Connectors Printed Circuit Board Right Angle Mount Spectrum Part Number EMI Filter Filter Designation** Cap. Value 56-742-001 A 310 pF Pi 56-742-002 B 1000 pF C 56-742-003 C 1000 pF Pi 56-742-004 D 5000 pF C 56-742-005 E 4000 pF Pi 56-742-006 F 830 pF C 56-742-007 J 100 pF Pi 56-742-008 K 2500 pF Pi 56-742-009 N 375 pF C 56-742-022 L 500 pF C * May be available from distributor stock. ** See page 149 for filter performance. Standard Tolerance = .005 except where noted, = .015 167 Mating Face Termination Face Side View Bottom View Dimensions in inches (mm) SPECTRUM CONTROL INC. * 8031 Avonia Rd. * Fairview, PA 16415 * Phone: 814-474-2207 * Fax: 814-474-2208 * Web site: www.spectrumcontrol.com SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 *1566 PRINTER 121-170 v2 50 Shell Size 12/4/06 9:31 AM Page 47 Series 700 Pin Contact Solderless Wire Wrap Spectrum Part Number EMI Filter Select one L .500 L .375 L .250 Filter Desig.** Cap. Value 56-741 -006 -022 -017 A 310 pF Pi 56-741 -007 -023 -018 B 1000 pF C 56-741 -008 -024 -019 C 1000 pF Pi 56-741 -009 -025 -020 D 5000 pF C 56-741 -010 -026 -021 E 4000 pF Pi 56-741 -036 -033 -030 F 830 pF C 56-741 -037 -034 -031 J 100 pF Pi 56-741 -038 -035 -032 K 2500 pF Pi 56-741 -045 -044 -043 N 375 pF C Mating Face Side View Termination Face Solder Cup Termination EMI Filter Filter Designation** Cap. Value * 56-741-011 A 310 pF Pi * 56-741-012 B 1000 pF C * 56-741-013 C 1000 pF Pi * 56-741-014 D 5000 pF C * 56-741-015 E 4000 pF Pi 56-741-039 F 830 pF C 56-741-040 J 100 pF Pi 56-741-041 K 2500 pF Pi 56-741-063 N 375 pF C 56-741-067 L 500 pF C * May be available from distributor stock. ** See page 149 for filter performance. Standard Tolerance = .005 except where noted, = .015 Filtered Connectors Spectrum Part Number Mating Face Side View Termination Face Dimensions in inches (mm) SPECTRUM CONTROL INC. * 8031 Avonia Rd. * Fairview, PA 16415 * Phone: 814-474-2207 * Fax: 814-474-2208 * Web site: www.spectrumcontrol.com SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 168 *1566 PRINTER 121-170 v2 50 Shell Size 12/4/06 9:31 AM Page 48 Series 700 Socket Contact Printed Circuit Board Mount EMI Filter Spectrum Part Number Filter Designation** Cap. Value 56-743-001 A 310 pF Pi 56-743-002 B 1000 pF C 56-743-003 C 1000 pF Pi 56-743-004 D 5000 pF C 56-743-005 E 4000 pF Pi 56-743-021 F 830 pF C 56-743-022 J 100 pF Pi 56-743-023 K 2500 pF Pi 56-743-033 N 375 pF C 56-743-043 L 500 pF C Mating Face Side View Termination Face Filtered Connectors Printed Circuit Board Right Angle Mount Spectrum Part Number EMI Filter Filter Designation** Cap. Value 56-744-001 A 310 pF Pi 56-744-002 B 1000 pF C 56-744-003 C 1000 pF Pi 56-744-004 D 5000 pF C 56-744-005 E 4000 pF Pi 56-744-006 F 830 pF C 56-744-007 J 100 pF Pi 56-744-008 K 2500 pF Pi 56-744-009 N 375 pF C 56-744-012 L 500 pF C * May be available from distributor stock. ** See page 149 for filter performance. Standard Tolerance = .005 except where noted, = .015 169 Mating Face Termination Face Side View Bottom View Dimensions in inches (mm) SPECTRUM CONTROL INC. * 8031 Avonia Rd. * Fairview, PA 16415 * Phone: 814-474-2207 * Fax: 814-474-2208 * Web site: www.spectrumcontrol.com SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 *1566 PRINTER 121-170 v2 50 Shell Size 12/4/06 9:31 AM Page 49 Series 700 Socket Contact & Pin/Socket Adapter Solderless Wire Wrap Spectrum Part Number EMI Filter Select one 56-743 56-743 56-743 56-743 56-743 56-743 56-743 56-743 56-743 L .500 -006 -007 -008 -009 -010 -030 -031 -032 -036 L .375 -016 -017 -018 -019 -020 -027 -028 -029 -035 L .250 -011 -012 -013 -014 -015 -024 -025 -026 -034 Filter Desig.** A B C D E F J K N Cap. Value 310 1000 1000 5000 4000 830 100 2500 375 pF Pi pF C pF Pi pF C pF Pi pF C pF Pi pF Pi pF C Mating Face Side View Termination Face Solder Cup Termination EMI Filter Filter Designation** 56-746-001 56-746-002 56-746-003 56-746-004 56-746-005 56-746-006 56-746-007 56-746-008 56-746-009 56-746-018 A B C D E F J K N L Cap. Value 310 1000 1000 5000 4000 830 100 2500 375 500 pF Pi pF C pF Pi pF C pF Pi pF C pF Pi pF Pi pF C pF C Mating Face Side View Termination Face Filtered Connectors Spectrum Part Number Pin/Socket Adapter Spectrum Part Number * 56-745-001 56-745-002 * 56-745-003 56-745-004 * 56-745-005 56-745-006 56-745-007 56-745-008 56-745-019 56-745-027 EMI Filter Filter Designation** A B C D E F J K N L Cap. Value 310 1000 1000 5000 4000 830 100 2500 375 500 * May be available from distributor stock. ** See page 149 for filter performance. Standard Tolerance = .005 except where noted, = .015 pF Pi pF C pF Pi pF C pF Pi pF C pF Pi pF Pi pF C pF C Socket Face Side View Pin Face Dimensions in inches (mm) SPECTRUM CONTROL INC. * 8031 Avonia Rd. * Fairview, PA 16415 * Phone: 814-474-2207 * Fax: 814-474-2208 * Web site: www.spectrumcontrol.com SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 170 *1566 PRINTER 121-170 v2 12/4/06 9:31 AM Page 50 D-Subminiature Part Numbering System Ordering Information Example: 56-513-012-TI 56 - 5 1 3 - 0 12 Product Series 1 = Series 100 C.O.B. 4 = Series F Ferrite 5 = Series 500 Low Profile 6 = Series 600 Hi-Density 7 = Series 700 High Performance Filtered D-Subminiature Connectors - Standard connector F - RoHS compliant version Options - Shell Size Series 400, Series 100 & 500 0 = 9 Contacts 1 = 15 Contacts 2 = 25 Contacts 3 = 37 Contacts See options descriptions on page 172 add suffix ending TI Line Filtering Capacitance Value 0 = All positions same Series 400 01 = Always 9 = Special loading (Series 600 only) Series 600 Hi-Density 0 = 15 Contacts 1 = 26 Contacts 2 = 44 Contacts 3 = 62 Contacts 4 = 78 Contacts Series 700 0 = 9 Contacts 1 = 15 Contacts 2 = 25 Contacts 3 = 37 Contacts 4 = 50 Contacts Filtered Connectors Contact Type/Termination 1 2 3 4 5 6 7 = = = = = = = Pin to solder cup Pin to 90 PCB mount Socket to straight PCB mount Socket to 90 PCB mount Pin-socket adapter Socket to solder cup Pin to straight PCB mount Styles available for: Series 400 only 2, 3, 4, 7 Series 100 1 thru 7 Series 500 only 2, 3, 4 & 7 Series 600 only 1, 2, 3, 4, 5 Series 700 1 thru 6 Note: 1 can be Pin to solder cup or Pin to PCB for Series 700. See charts pages 151-170. To assist your efforts in selecting the correct Filtered Connector to meet your needs, we have developed a part numbering system. All of the standard products are shown in their respective catalog pages. Part number 56-513-012-TI represents a Series 500 connector with 15 contacts in a socket to straight PCB mount configuration. All connector positions have a capacitance value of 840 pF and there are 4-40 threads on mounting flange. 171 Series 100 02 = 100 pF 03 = 220 pF 04 = 470 pF 05 = 820 pF 06 = 1500 pF 07 = 5600 pF 08 = 50 pF 09 = 180 pF 10 = 1000 pF 11 = 2200 pF 12 = 47 nF Series 500 10 = 120 pF 11 12 13 14 = = = = 440 pF 840 pF 1000 pF 1500 pF Series 600 15 = 85 pF FT 16 = 180 pF FT 18 = 1000 pF FT 19 = 4000 pF FT 20 = Insulated contact Series 700 See filter specification chart on page 149 and select part numbers from Series 700 charts pages 151-170. Series 100 _ - .120 thru-hole and 15" gold (.38um) 3G - 30" gold (.76um) 5G - 50" gold (1.27um) SC and Straight PCBs TIB - 4-40 thread on rear of flange TIF - 4-40 thread on front of flange MIB - M3 thread on rear of flange GBL6 - for .062" boards (1.57mm) JS - Jack screws Right Angles and Adapters _ - No GBL attached GL - includes grounding board lock and 4-40 threads T - 4-40 threads GB - no board locks J - jack screws M - M3 thread GF - GL and jack screws Series F HD =Hi-Density (15 socket only) Series 500 TI = 4-40 threads on mounting flange (.125" hole if not selected) GBL = Grounded board lock includes 4-40 threads (available only on 90 PCB) GBLF = Grounded board lock and ferrite slab provides enhanced LC performance. (Available only on 90 PCB) Series 600 Hi-Density LI = 4-40 UNC inserts S = Solder dipped tails 50G = 50 (1.27 m) gold GBL = Ground board lock Series 700 LI = 4-40 UNC inserts LIM = Metric M3.0 self-locking threads GB = Metal bracket provides ground connection, includes 4-40 self-locking threads (for right angle mount only) GBL = Grounded board lock (right angle) GBL6 = for .062" boards (straight PCB mount) (1.57mm) GBL9 = for .093" boards (straight PCB mount (2.36mm) 50G = 50 (1.27 m) gold plating S = Solder dipped tails JS = Jackscrew mounting For option combinations, consult factory. SPECTRUM CONTROL INC. * 8031 Avonia Rd. * Fairview, PA 16415 * Phone: 814-474-2207 * Fax: 814-474-2208 * Web site: www.spectrumcontrol.com SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 *1566 PRINTER 121-170 v2 12/4/06 9:31 AM Page 51 Threaded Inserts Adapter Connector D-Subminiature Connector Options Locking Insert Threaded Inserts I I I Available on Series 500, 600 & 700 #4-40 UNC or metric M3.0 threaded inserts in mounting flanges Allows ease of panel-assembly Plated steel inserts with last thread upset for torque Grounding Bracket I I I I For right angle mount PCB connectors, available on Series 700 Metal bracket in place of plastic Provides ground connection direct from circuit board Allows shell grounding to board Includes 4-40 threads Stand-off with Board Lock Feature I I I I For straight PCB connectors, available on Series 700 Allows shell grounding to board Eliminates stress on filter terminations Tin plated brass stand-off with snap-in feature Available for .062" (1.57mm) or .093" (2.36mm) thick boards Locking Insert 4 Places 2 Places Grounding Brackets .265 (6.73) O.125 (3.18) thru (typ) Flame retardant lead spacer (Phenolic) Connector flange .540 (13.72) O.160 (4.06) thru (typ) A B #4-40 UNC-2B eyelets (typ) .375 (9.53) .250 (6.35) Connector flange Right angle bracket .086 (2.18) A Size 9 15 25 37 .984 1.312 1.852 2.500 B (24.99) (33.32) (47.04) (63.50) (30.84) (39.17) (53.04) (69.34) 1.214 1.542 2.088 2.730 Stand-off with Board Lock Grounding Bracket with Board Lock I I Snap-in, no hardware needed, 4-40 threads included For use on .062" (1.57mm) thick boards For .062 (1.57) or .093 (2.36) thick PC board .187 (4.75) dia. stand-off For .120 (3.05) dia. mounting hole Gold Plating I Available on Series 600 & 700 High reliability applications, 50" (1.27 m) gold over 50" (1.27 m) nickel Solder Dipped Tails I Available on Series 600 & 700 connectors Solder dipped tails added to standard gold flash Water Block I Consult Spectrum Control engineers for specifics. Internally sealed in accordance with NEMA Standard Rain Test section 6.4 (also UL50 part 28 ram test for submersion, section 6.10.1) Grounding Bracket with Board Lock (see above for grounding bracket details) #4-40 UNC - 2B 2 places .170 (4.32) Filtered Connectors I .440.010 (11.18.25)) For right angle mount PCB connectors, available on Series 500 & 700 Metal bracket provides grounding .494 (12.55) For .062 (1.57) thick board For .125 (3.18) O mounting hole Dimensions in inches (mm) SPECTRUM CONTROL INC. * 8031 Avonia Rd. * Fairview, PA 16415 * Phone: 814-474-2207 * Fax: 814-474-2208 * Web site: www.spectrumcontrol.com SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 172 *1566 PRINTER 121-170 v2 12/4/06 9:31 AM Page 52 Filtered Combo D-Subminiature Connectors Spectrum's line of filtered combo D-subs provide high insertion loss with tubular capacitive filtering. These connectors are available with 20 Amp power contacts, 40 Amp power contacts, 50 ohm coaxial contacts or 75 ohm coaxial contacts. Configurations include male and female versions with straight PC terminals, right angle PC terminals or solder cup terminals. Standard D-sub shell sizes provide intermateability with unfiltered connectors. High strength epoxy potting protects ceramic elements. Capacitive filtering is available in 470, 820, 1000 and 1500 pF. Additional capacitance ranges and configurations can be provided upon request. Please consult factory for more information. Applications I Telecommunications base station equipment I Switching and transmission equipment I Power supplies I Industrial equipment I Computer work stations Filtered Connectors A Shell . . . . . . . . . . . . . . . . . Steel, tin plated Power Contacts . . . . . . . . . Brass, gold plated .000030 in. (0.762 m) minimum Signal Contacts . . . . . . . . . Pin: brass, gold plated . . . . . . . . . . . . . . . . . . . . . .000015 in. (0.762 m) min. . . . . . . . . . . . . . . . . . . . . . Socket: copper alloy, gold plated .000030 in. (0.762 m) min. Insulator . . . . . . . . . . . . . . Glass-filled polyester, . . . . . . . . . . . . . . . . . . . . . flammability UL94V-0 Operating Temperature . . . . -55C to +125C Capacitors . . . . . . . . . . . . . Proprietary barium titanate . . . . . . . . . . . . . . . . . . . . . ceramic formulations or high . . . . . . . . . . . . . . . . . . . . . voltage MLCC Electrical Specifications Operating Voltage . . . . . . . 200 VDC Current Rating* . . . . . . . . . 40 Amp power/ 5 Amp signal Insulation Resistance . . . . . 1 Gohm at 100 VDC Capacitance . . . . . . . . . . . . 470, 820, 1000, 1500, or . . . . . . . . . . . . . . . . . . . . . 4000 pF (FT only) 20% . . . . . . . . . . . . . . . . . . . . . (10 - 5000 pF available for . . . . . . . . . . . . . . . . . . . . . signal pins, consult factory for . . . . . . . . . . . . . . . . . . . . . part number on values above . . . . . . . . . . . . . . . . . . . . . 1500 pF and below 470 pF) Dielectric Withstanding Voltage . . . . . . . . . . . . . . . 600 VDC Ordering Information Example: 563A03W3101GBL9 56 * 3 Mechanical Specifications 03W3 A: Pin - PCB Power B: Pin - Right Angle Power C: Pin - Solder Cup Power D: Pin - PCB Coax E: Pin - Right Angle Coax F: Pin - Solder Cup Coax G: Socket - PCB Power H: Socket - Right Angle Power J: Socket - Solder Cup Power K: Socket - PCB Coax L: Socket - Right Angle Coax M: Socket - Solder Cup Coax N: Custom Combination 101 GBL9 *30 Amp available. Consult factory. Options Contact Arrangement Capacitance Value 03W3 05W5 09W4 24W7 Tubular 101 = 470 pF 102 = 820 pF 103 = 1000 pF 104 = 1500 pF MLCC 201 = 470 pF 202 = 820 pF 203 = 1000 pF 204 = 1500 pF = = = = 3W3 5W5 9W4 24W7 See options descriptions on page 172 add suffix ending LI = 4-40 UNC inserts LIM = Metric M3.0 self-locking threads GB = Metal bracket provides ground connection, includes 4-40 self-locking threads (for right angle mount only) GBL = Grounded board lock (right angle) GBL6 = for .062" boards (straight PCB mount) GBL9 = for .093" boards (straight PCB mount 50G = 50 (1.27 m) gold plating S = Solder dipped tails JS = Jackscrew mounting For option combinations, consult factory. * Insert "F" for RoHS compliant 173 SPECTRUM CONTROL INC. * 8031 Avonia Rd. * Fairview, PA 16415 * Phone: 814-474-2207 * Fax: 814-474-2208 * Web site: www.spectrumcontrol.com SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 *1566 PRINTER 171-241 v2 12/4/06 9:41 AM Page 1 Filtered Combo D-Subminiature Connectors 3W3 Plug - Solder Cup 1.541.015 (39.140.38) 1.312 (33.32) Epoxy 4-40 Clinch Nut 2 Plc. Mating Face .329 (8.36) .500.015 (12.700.38) .269 (6.83) Typ. .995 (25.27) .233.006 (5.920.15) .055.020 (1.400.51) 1 .036.010 (0.920.25) .217 (5.50) .809.025 (20.550.64) 267122-1 .328.021 (8.330.53) Plug Assembly Contact 3 Plc. .425 (10.80) Max. .128 (3.24) Typ. O .089 (2.26) 1.134 (28.80) 100 Typ. .449 (11.40) Filtered Connectors 1.025 (26.04) Max. .130 (3.30) 4 Plc. .225 (5.72) .120 (3.05) 2 Plc. O 1.312 (33.32) Recommended Panel Cutout Only represents a few of our available configurations. Consult factory for more information. Dimensions in inches (mm) SPECTRUM CONTROL INC. * 8031 Avonia Rd. * Fairview, PA 16415 * Phone: 814-474-2207 * Fax: 814-474-2208 * Web site: www.spectrumcontrol.com SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 174 *1566 PRINTER 171-241 v2 12/4/06 9:41 AM Page 2 Filtered Combo D-Subminiature Connectors 3W3 Plug - Right Angle .995 (25.27) Contact 3 Plc. Plug Assembly .217 (5.50) .036.010 (0.920.25) .233.006 (5.920.15) .995 (25.27) .269 .269 (6.83) (6.83) Typ. Typ. .120 (3.05) 2 Plc. O .055.020 (1.400.51) .425 (10.80) Max. .500.015 (12.700.38) .329 (8.36) Mating Face Epoxy 1.312 (33.32) .125.025 (3.180.64) Typ. .500 (12.70) 2 Plc. Filtered Connectors 1.541.015 (39.140.38) .089 (2.26) 1.134 (28.80) 100 Typ. .449 (11.40) .130 (3.30) 4 Plc. .225 (5.72) .120 (3.05) 2 Plc. O 1.312 (33.32) .538 (13.66) .269 (6.83) o .077 (1.96) o .004 (.01) 3 Plc. Recommended Panel Cutout Only represents a few of our available configurations. Consult factory for more information. 175 o .0625.0010 (1.5880.025) 2 Plc. Dimensions in inches (mm) SPECTRUM CONTROL INC. * 8031 Avonia Rd. * Fairview, PA 16415 * Phone: 814-474-2207 * Fax: 814-474-2208 * Web site: www.spectrumcontrol.com SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 *1566 PRINTER 171-241 v2 12/4/06 9:41 AM Page 3 Filtered Combo D-Subminiature Connectors 5W5 Plug - Vertical o .128 (3.25) Contact 5 Plc. .125.025 (3.1750.64) .645 (16.38) 2 Plc. .042.010 (1.070.25) 1 .217 (5.51) 93931-1 1.040 (26.42) 5 Plc. Rear Shell .228.004 (5.790.10) 1.535 (38.99) .500.015 (12.700.38) .330 (8.38) 1.852 (47.04) 4-40 UNC Standoff 2 Plc. 2.090.015 (53.090.38) .00 (.000) .356 (9.04) .624 (15.85) .892 (22.66) 1.160 (29.46) 1.496 (38.00) Filtered Connectors o .140 (3.56) o .010 (0.25) o .125 (3.56) 2 Holes o .010 (0.25) 1.852 (47.04) Recommended PCB Layout Only represents a few of our available configurations. Consult factory for more information. Dimensions in inches (mm) SPECTRUM CONTROL INC. * 8031 Avonia Rd. * Fairview, PA 16415 * Phone: 814-474-2207 * Fax: 814-474-2208 * Web site: www.spectrumcontrol.com SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 176 *1566 PRINTER 171-241 v2 12/4/06 9:41 AM Page 4 Filtered Combo D-Subminiature Connectors 9W4 Socket - Solder Cup Solder Cup 5 Plc. Power Contact 4 Plc. .447.021 (11.350.53) .941.025 (23.900.64) Typ. .223.021 (5.660.53) 1 .036.010 (0.920.25) .242.004 (6.150.10) Front Shell 2.090.015 (53.090.38) 1.852 (47.04) 1.510 (38.35) Insert Mating Face .055.020 (1.400.51) Rear Shell 4-40 Clinch Nuts 2 Plc. .056 (1.42) M 2 A3 1 A2 o .128.003 (3.250.08) 4 Plc. A1 .310 .606.015 (7.87) (15.390.38) 5 4 3 o .062.001 (1.570.03) 5 Plc. Filtered Connectors .089 (2.26) .112 (2.84) Signal Contact 5 Plc. .570 (14.48) .306 (7.77) 0 .379 (9.63) .325 (8.25) .271 (6.88) .217 (5.51) .163 (4.14) .570 (14.48) .112 (2.84) 1.674 (42.51) 10 Typ. o .120 (3.05) 2 Holes .225 (5.72) 1.852 (47.04) Recommended Panel Cutout .132 (3.35) Typ. Only represents a few of our available configurations. Consult factory for more information. 177 Dimensions in inches (mm) SPECTRUM CONTROL INC. * 8031 Avonia Rd. * Fairview, PA 16415 * Phone: 814-474-2207 * Fax: 814-474-2208 * Web site: www.spectrumcontrol.com SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 *1566 PRINTER 171-241 v2 12/4/06 9:41 AM Page 5 Filtered Combo D-Subminiature Connectors 9W4 Socket - Vertical Boardlock 2 Plc. .891.025 (22.630.64) Typ. o .040.002 (1.020.05) 5 Plc. Signal Contact 5 Plc. o .128.003 (3.250.08) 4 Plc. Power Contact 4 Plc. .383.021 (9.720.53) 4 Plc. .397.021 (10.080.53) 5 Plc. 1 .036.010 (0.920.25) .325 (8.26) .300 (7.62) 2 Plc. .242.004 (6.150.10) Front Shell .056 (1.42) 2.090.015 (53.090.38) 1.852 (47.04) 1.510 (38.35) Insert M 2 A3 1 Mating Face A2 Rear Shell .055.020 (1.400.51) 4-40 Standoff 2 Plc. A1 .310 .606.015 (7.87) (15.390.38) 1.852 (47.04) Recommended Panel Cutout o .120 (3.05) 2 Holes .132 (3.35) Typ. .326 (23.52) .570 (14.48) .306 (7.77) .379 (9.63) .325 (8.25) .271 (6.88) .217 (5.51) .163 (4.14) 10 Typ. .225 (5.72) .570 (14.48) .570 (14.48) .306 (7.77) 0 1.674 (42.51) .056 (1.42) .000 (0.00) .056 (1.42) o .055 (1.40) o .004 (0.10) 5 Plc. o .140 (3.56) o .010 (0.25) 4 Plc. Posn. 1 o .125.003 (3.180.08) o .010 (0.25) 2 Plc. Recommended PC Board Mounting Dimensions Only represents a few of our available configurations. Consult factory for more information. Filtered Connectors .112 (2.84) 3 .326 (23.52) .089 (2.26) 4 .379 (9.63) .325 (8.25) .271 (6.88) .217 (5.51) .163 (4.14) .112 (2.84) .570 (14.48) 5 Dimensions in inches (mm) SPECTRUM CONTROL INC. * 8031 Avonia Rd. * Fairview, PA 16415 * Phone: 814-474-2207 * Fax: 814-474-2208 * Web site: www.spectrumcontrol.com SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 178 *1566 PRINTER 171-241 v2 12/4/06 9:41 AM Page 6 Filtered Combo D-Subminiature Connectors 9W4 Plug - Right Angle .240 (6.10) Power Pin 4 Plc. L Bracket 2 Plc. Signal Pin 5 Plc. .560 (14.22) 2 Plc. Threaded Fastener 2 Plc. .042.010 (1.070.25) Lockwasher 2 Plc. .228.004 (5.790.10) Screwlock 2 Plc. 2.090.015 (53.090.38) 1.535 (38.99) A1 A2 1 A3 .330 (8.38) .055.020 (1.400.51) Mating Face 3 2 4 .262 (6.65) Rear Shell Front Shell A4 .500.015 (2.700.38) 5 .125.025 (3.180.64) Typ. .216 (5.48) 2 Plc. Boardlock 2 Plc. .128.002 (3.250.05) 4 Plc. 1.852 (47.04) .040 (1.02) 5 Plc. .270 (6.86) Epoxy .056 (1.41) 3 Plc. .500 (12.70) 4 Plc. .056 (1.41) 2 Plc. Filtered Connectors 1.852 (47.04) 1.140 (28.96) .841 (21.36) .926 (23.52) .054 (1.37) 4 Plc. .570 (14.48) .056 (1.42) Typ. .264 (6.71) .230 (5.84) 4 Plc. .112 (2.84) Typ. o .143.003 (3.630.08) o .006 (0.15) 4 Plc. o .055.003 (1.400.08) o .006 (0.15) 5 Plc. o .125.003 (3.180.08) o .010 (0.25) 2 Plc. Recommended PC Board Mounting Dimensions Only represents a few of our available configurations. Consult factory for more information. 179 Dimensions in inches (mm) SPECTRUM CONTROL INC. * 8031 Avonia Rd. * Fairview, PA 16415 * Phone: 814-474-2207 * Fax: 814-474-2208 * Web site: www.spectrumcontrol.com SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 *1566 PRINTER 171-241 v2 12/4/06 9:41 AM Page 7 Filtered Combo D-Subminiature Connectors 24W7 Socket - Solder Cup Solder Cup 17 Plc. Power Contact 2 Plc. Rear Shell 4-40 Clinch Nuts 2 Plc. .988.025 (25.090.61) Typ. .036.010 (0.920.25) .242.004 (6.150.10) Front Shell Mating Face 2.063 (52.40) .056 (1.42) Typ. A7 .270 (6.86) Typ. A6 A5 A4 .055.020 (1.400.51) A3 A2 A1 .422 .606.015 (10.72) (15.390.38) 17 .112 (2.84) Typ. 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 o .128.003 (3.250.08) 7 Plc. o .062.001 (1.570.03) 17 Plc. .109 (2.76) Typ. o .494.021 (12.550.53) 17 Plc. Signal Contact 17 Plc. 2.406 (61.11) 2.638.015 (67.010.38) .094 (2.39) Typ. .323.021 (8.200.53) Filtered Connectors Insert 2.218 (56.34) 100 Typ. .120 (3.05) 2 Plc. O .555 (14.10) .278 (7.06) 2 Plc. 2.406 (61.11) Recommended Panel Cutout .132 (3.35) 4 Plc. Only represents a few of our available configurations. Consult factory for more information. Dimensions in inches (mm) SPECTRUM CONTROL INC. * 8031 Avonia Rd. * Fairview, PA 16415 * Phone: 814-474-2207 * Fax: 814-474-2208 * Web site: www.spectrumcontrol.com SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 180 *1566 PRINTER 171-241 v2 12/4/06 9:42 AM Page 8 Series E (ESD/EFT) Transient Protected Connectors These fully integrated connectors and adapters provide protection from Electro Static Discharge (ESD) and Electronically Fast Transients (EFT) that can damage or even destroy your equipment. The connectors are designed to meet various IEC 61000-4-21, EN 61000-4-2 and IEC 61000-4 standards, and are offered in a wide range of clamping voltages to fit your specific application. The connectors have integrated ESD transient voltage suppressors from Littelfuse(R), are available in industry standard sizes and are "drop in" replacements for unprotected connectors. ESD Transient Spike Waveform Voltage They are available with various capacitance levels to condition your signals to handle EMI issues at the same time or with as little as a 0.05 pF to protect the integrity of your signal in high speed or digital applications. Typical Time-Voltage Curves Clamping Voltage Features I Clamped Waveform ESD/EFT protection at the I/O ports - Prevents the transients from entering the system before they can cause harm or create EMI problems. Time Typical Time-Voltage Curve of Transient Spike on Integrated Protected Connector with Capacitance (Parts with Working Voltage Code starting with 0) Low ground impedance - The metallic shell provides minimal impedance to direct the damaging transient spikes to ground, which is essential for proper protection. Potential Voltage Overshoot Voltage Removal of ground traces from the board - This eliminates potential line-to-line noise problems and spark-overs between ground and signal lines. I Complete protection - All lines, including ground lines, have bi-directional protection. Voltage Across Connector Clamp Voltage ESD Event Peak Current Current Through Connector I Efficient space utilization - Standard footprints save valuable board space in terms of not only components, but also extra ground traces. Filtered Connectors I Voltage I System Voltage Limit I Fewer components - Reduces total number of components purchased, stocked, placed and tested; yielding the savings of all the hidden costs involved in these activities, while reducing your supplier base. I Available capacitance - Available with various capacitance values to supply low pass properties along with the transient protection, thus supplying ESD/EFT and EMI protection all in one complete package. The metal shell also provides EMI shielding of system. Parts are available with capacitance values less than 50 pF for digital and very high speed signal lines. 181 SPECTRUM CONTROL INC. * 8031 Avonia Rd. * Fairview, PA 16415 * Phone: 814-474-2207 * Fax: 814-474-2208 * Web site: www.spectrumcontrol.com SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 Protection Trigger Time Typical Time-Voltage Curve of Low Capacitance Integrated Protection (Parts with Working Voltage Code starting with P) Mechanical Specifications Front Shell . . . . . . . . . . . Steel, tin plated Housing. . . . . . . . . . . . . 94V-0 rated thermoplastic, black Eyelets . . . . . . . . . . . . . . Brass, tin plated Threaded Inserts . . . . . . . Zinc Boardlocks . . . . . . . . . . . Copper alloy, tin-lead plated Pin Contacts . . . . . . . . . Brass Socket Contacts . . . . . . . Phosphor Bronze Contact Plating . . . . . . . Duplex plated as follows: 15uin (.38um) . . . . . . . . . . . . . . . . . . . gold on mating end, with entire contact . . . . . . . . . . . . . . . . . . . 50uin (1.27um) min. nickel underplated . . . . . . . . . . . . . . . . . . . and flash gold finish. Current Rating. . . . . . . . 5 Amp per pin Operating Temp . . . . . . . -55C to +125C *1566 PRINTER 171-241 v2 12/4/06 9:42 AM Page 9 Series E (ESD/EFT) Transient Protected Connectors Ordering Information Example: 56-E04-005-5-T 56 - E 0 4 - 005 Series E (ESD/EFT) Connectors Integrated D-sub Connectors Shell Size/ Number of Contacts 0 1 2 3 - 9 size 15 size 25 size 37 size This part number represents a Series E connector with a shell size of 9 and a socket to right angle configuration. The maximum working voltage is 5.5 VDC and the connector has a .590" footprint with 4-40 threads. - 5 - Contact Type/Termination Working Voltage Code 1 2 3 4 5 6 7 See table below. (Use 3-digit code that matches your electrical requirements) - Pin to solder cup Pin to right angle Socket to straight PCB Socket to right angle Adapter (pin to socket) Socket to solder cup Pin to straight PCB Mounting or Hardware Options _ - .120 thru-hole and 15" gold 3G - 30" gold 5G - 50" gold SC and Straight PCBs (only) TIB - 4-40 thread on rear of flange TIF - 4-40 thread on front of flange MIB - M3 thread on rear of flange GBL6 - for .062" boards JS - Jack screws Right Angles and Adapters (only) _ - No GBL attached GL - Includes grounding board lock T - 4-40 threads GB - No board locks J - Jack screws M - M3 thread GJ - GL and jack screws T Footprint (right angle connectors only) 3 - .318" 4 - .405" 5 - .590" Transient Voltage Protection with Capacitance Immunity to IEC 61000-4-2 (ESD) up to level 4 and IEC 61000-4-4 (EFT) air and contact discharge specifications. Clamp Voltage Peak Current Energy (J) Working Max. Working Voltage V breakdown 8 x 20 s VDC VAC 8 x 20 s 1 ma 10 x 100 s Voltage Code 0.3 5 (3.7-7.0) 120 10.0@5A 2.5 3.5 003 0.3 8 (7.1-9.3) 120 15.5@5A 4.0 5.5 005 0.1 12 (11-14) 40 20.0@2A 6.5 9.0 009 0.1 16 (14-18.5) 40 25.0@2A 9.0 12.0 012 0.3 18 (15.9-20.3) 120 30.0@5A 10.0 14.0 014 0.3 25 (22-28) 120 40.0@5A 14.0 18.0 018 0.3 34 (29.5-38.5) 100 58.0@5A 20.0 26.0 026 0.1 42 (37-46) 30 65.0@2A 25.0 30.0 030 >25.0 >30.0 Please consult factory for availability Typical Cap. pF at 1 MHz 2200 1600 450 350 480 450 190 80 Notes: Consult factory for custom capacitance values. Typical leakage at 25C is <25 A Maximum leakage 50 A at Vm(DC) Immunity to IEC 61000-4-2 (ESD) up to Level 4 air and contact discharge. Excellent for digital, high speed and high frequency signals. Working Max. Working Trigger Clamp Voltage Leakage (A) Typical Cap. Voltage Code Voltage (V) DC Voltage Current at 1 MHz Typical Maximum 1000 P24 24.0 150.0 80.0 <1.0 nA 0.05 pF Board Layouts .318" and .405" Footprint Typical Layout - Top View .054 (1.385) .109 (2.77) O.043 (1.09) O.120 (3.05) .318 or .405 (8.08) (10.20) .056 .112 (1.42) (2.84) A Shell A Size .005 (0.13) 9 .984 (24.99) 15 1.312 (33.32) 25 1.852 (47.04) 37 2.500 (63.50) Dimensions in inches (mm) .590" Footprint Typical Layout - Top View .054 (1.385) .109 (2.77) .112 (2.84) .590 (14.99) B Shell B Size .005 (0.13) 9 .984 (24.99) .315 (8.00) 15 1.312 (33.32) .315 (8.00) 25 1.852 (47.04) 37 2.500 (63.50) O.043 (1.09) O.120 (3.05) Filtered Connectors Transient Voltage Protection without Significant Capacitance Dimensions in inches (mm) SPECTRUM CONTROL INC. * 8031 Avonia Rd. * Fairview, PA 16415 * Phone: 814-474-2207 * Fax: 814-474-2208 * Web site: www.spectrumcontrol.com SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 182 *1566 PRINTER 171-241 v2 12/4/06 9:42 AM Page 10 Series E (ESD/EFT) Transient Protected Connectors Pin Contact (plug) Socket Contact (receptacle) Straight PC Mount Straight PC Mount A B C A B C .33 .50.010 (8.36) (12.55.25) .055 (1.385) Typ. .011 (2.84) o .12 (3.05) .32 .50.010 (7.90) (12.55.25) .055 (1.385) Typ. .011 (2.84) .23.006 (5.900.15) o .12 (3.05) .039.010 (0.99.25) .23.006 (6.000.15) .24 (4.06) .054 (1.385) D .14.015 (5.580.38) .24 (4.06) .112 (2.84) .42.010 (10.720.25) .055 (1.385) D .15.015 (5.580.38) A B C A B C .32 .50.010 (7.90) (12.55.25) .33 .50.010 (8.36) (12.55.25) .055 (1.385) Typ. Filtered Connectors o .12 (3.05) .16 (4.06) 9 B C D 1.213.015 .984.005 .667.010 .755 (30.810.38) (24.990.13) (16.920.25) (19.18) E Footprint .318 .405 25 2.088.015 1.852.005 1.534.010 1.614 (53.040.38) (47.040.13) (38.960.25) (41.00) 2.73.015 2.50.005 2.18.010 2.27 (69.320.38) (63.500.13) (55.420.25) (57.71) .590 .16 (4.06) E F .430 .318 (10.92) (8.08) .517 .405 (13.13) (10.29) .700 .590 (17.83) (14.99) Size 9 A B .039.010 (0.99.25) E F .112 (2.84) .42.010 (10.720.25) .125 (3.175) D Dimensions in inches (mm) 183 .23.006 (6.000.15) .025 (0.64) SQ F 15 1.541.015 1.312.005 .994.010 1.083 (39.140.38) (33.320.13) (25.250.25) (27.51) 37 o .12 (3.05) .039.010 (0.99.25) .112 (2.84) .42.010 (10.720.25) .125 (3.175) D A .055 (1.385) Typ. .011 (2.84) .23.006 (5.900.15) .025 (0.64) SQ Size .112 (2.84) .42.010 (10.720.25) 90 PC Mount 90 PC Mount .011 (2.84) .039.010 (0.99.25) C D 1.213.015 .984.005 .643.010 .755 (30.810.38) (24.990.13) (16.330.25) (19.18) Footprint .430 .318 (10.92) (8.08) .405 .517 .405 (13.13) (10.29) .590 .700 .590 (17.83) (14.99) 25 2.088.015 1.852.005 1.511.010 1.614 (53.040.38) (47.040.13) (38.380.25) (41.00) 2.73.015 2.50.005 2.16.010 2.27 (69.320.38) (63.500.13) (54.840.25) (57.71) F .318 15 1.541.015 1.312.005 .971.010 1.083 (39.140.38) (33.320.13) (24.660.25) (27.51) 37 E Dimensions in inches (mm) SPECTRUM CONTROL INC. * 8031 Avonia Rd. * Fairview, PA 16415 * Phone: 814-474-2207 * Fax: 814-474-2208 * Web site: www.spectrumcontrol.com SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 *1566 PRINTER 171-241 v2 12/4/06 9:42 AM Page 11 Series E (ESD/EFT) Transient Protected Connectors Pin Contact (plug) Pin - Socket Adapter Solder Cup Termination A B C A .311 (7.90) .33 .50.010 (8.36) (12.55.25) .055 (1.385) Typ. .011 (2.84) o .12 (3.05) o .12 (3.05) .24.006 (6.000.15) E F D .039.010 (0.99.25) .241.006 (6.120.15) Shell .053 (1.34) .42.010 (10.720.25) .520 (13.31) Socket Contact (receptacle) B Solder Cup Termination Shell with grounding inserts A B C C D E .32 .50.010 (7.90) (12.55.25) o .12 (3.05) .24.006 (6.000.15) E F D Size C .053 (1.34) .42.010 (10.720.25) F Size A 1.213.015 .984.005 .643.010 .755 (30.810.38) (24.990.13) (16.330.25) (19.18) .16 (4.06) .16 (4.06) 9 .642 (16.31) 15 1.541.015 1.312.005 .971.010 1.083 (39.140.38) (33.320.13) (24.660.25) (27.51) .16 (4.06) .16 (4.06) 15 25 2.089.015 1.852.005 1.511.010 1.615 (53.040.38) (47.040.13) (38.380.25) (41.00) .16 (4.06) .16 (4.06) 2.73.015 2.50.005 2.16.010 2.27 (69.320.38) (63.500.13) (54.840.25) (57.71) .16 (4.06) .16 (4.06) 37 B .039.010 (0.99.25) E 9 A .329 .500.015 (8.36) (12.700.38) .250 (6.35) Typ. D Dimensions in inches (mm) B C D E .233.006 1.213.015 (5.92.15) (30.81.38) .984 (24.99) .667 (16.94) .970 (24.64) .233.006 1.541.015 (5.92.15) (39.14.38) 1.312 (33.33) .995 (25.27) 25 1.511 (38.38) .228.006 2.088.015 (5.80.15) (53.04.38) 1.852 (47.05) 1.532 (38.92) 37 2.158 (54.82) .228.006 2.729.015 (5.80.15) (69.32.38) 2.500 (63.50) 2.183 (55.45) Filtered Connectors .055 (1.385) Typ. .011 (2.84) Dimensions in inches (mm) SPECTRUM CONTROL INC. * 8031 Avonia Rd. * Fairview, PA 16415 * Phone: 814-474-2207 * Fax: 814-474-2208 * Web site: www.spectrumcontrol.com SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 184 *1566 PRINTER 171-241 v2 12/4/06 9:42 AM Page 12 Filtered Miniature Ribbon Connectors Filtered Connectors Features I Lower installed cost I Assists with FCC Part 15; available for Part 68 requirements Typical Insertion Loss 40 35 Insertion Loss (dB) Filtered miniature ribbon connectors are fully intermateable and interchangeable with existing standard product. Rugged design construction and predictable capacitive filter performance is available in right-angle and male/female adapter versions. Applications for this type of connector are widely diversified and include all phases of the telecommunications industry including original telephone manufacturing, operating telephone companies, cable reclamation, cable manufacturing and bay connectorization. The filtered miniature ribbon connector line is also ideally suited for use in printers, computer terminals, test equipment, business and copying machines, telemetering, and various equipment used in the security industry. 30 25 820 pF 20 470 pF 220 pF 15 100 pF 10 5 0 1 MHz 10 MHz 100 MHz 1 GHz I Applicable for VDE specifications 0871, 0875-0878, Vfg Federal Regulations and VCCI noise requirements I Drop-in replacement, matched footprint Electrical Specifications I All circuit lines filtered I Connector body is recognized under the Component Recognition Program of Underwriters Laboratories, Inc. I Plastic components are UL94V-0 rated I Connector body is certified by Canadian Standard Association Operating Temperature . . . . . . . . . . . . -55C - 105C Dielectric Withstanding Voltage . . . . . . . . . . . . . . . 1000 VAC min per . . . . . . . . . . . . . . . . . . . . . (FCC Part 68 test) Capacitance . . . . . . . . . . . . 100 pF, 220 pF, 470 pF, . . . . . . . . . . . . . . . . . . . . . 820 pF, 15% (adapter), . . . . . . . . . . . . . . . . . . . . . 20% (connector) Dissipation Factor . . . . . . . 2.5% max (adapter) . . . . . . . . . . . . . . . . . . . . . 5% max (connector) Mechanical Specifications - Adapter Frequency Shell . . . . . . . . . . . . . . . . . Zinc Thermoplastic Insert. . . . . . . . . . . . . . . . . Black, high strength Contacts . . . . . . . . . . . . . . Copper alloy Contact Plating . . . . . . . . . 30uin (.76um) (min.) . . . . . . . . . . . . . . . . . . . . . gold over nickel Mechanical Specifications - Connector Shell . . . . . . . . . . . . . . . . . Steel, tin plated Thermoplastic Insert. . . . . . . . . . . . . . . . . Blue, 30% glass filled Contacts . . . . . . . . . . . . . . Phosphor bronze Contact Plating . . . . . . . . . Gold flash (<10 in) over nickel 185 SPECTRUM CONTROL INC. * 8031 Avonia Rd. * Fairview, PA 16415 * Phone: 814-474-2207 * Fax: 814-474-2208 * Web site: www.spectrumcontrol.com SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 *1566 PRINTER 171-241 v2 12/4/06 9:42 AM Page 13 Filtered Miniature Ribbon Connectors 50 Position Pin Contact 2.946 (74.84) PCB Edge 2.041 (51.84) (plug) .085 (2.16) TYP o .126 .002 (3.20 0.05) 2 PLC .450 (11.43) MAX 2 PLC .453 (11.50) .169 .003 (4.29 0.08) .085 (2.15) 2 PLC o.035 .002 (0.89 0.05) 50 PLC Recommended PCB Layout Filter Top 2.949 .010 (74.90 0.25) 3.264 .015 (82.90 0.38) 100 TYP 25 1 .305 .010 (7.75 0.25) TYP 50 26 .025 (0.64) TYP .085 .010 (2.16 0.25) TYP .610 .015 (15.50 0.25) Boardlock 2 PLC Contact 50 PLC Mating Face Shell Pin Organizer .478 .010 (12.14 0.25) 2 PLC Bottom o.130 (3.30) 2 PLC Position 1 Filter .559 (14.21) Filtered Connectors .155 (3.94) .531 (13.50) Screw #4-40 thread 2 PLC 2.589 (65.75) Dimensions in inches (mm) Part Number 56-882-002 56-882-003 56-882-004 56-882-005 Capacitance Value 100 pF, 20% 220 pF, 20% 470 pF, 20% 820 pF, 20% SPECTRUM CONTROL INC. * 8031 Avonia Rd. * Fairview, PA 16415 * Phone: 814-474-2207 * Fax: 814-474-2208 * Web site: www.spectrumcontrol.com SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 186 *1566 PRINTER 171-241 v2 12/4/06 9:42 AM Page 14 Filtered Miniature Ribbon Connectors 50 Position Socket Contact 2.946 (74.84) PCB Edge (receptacle) .085 (2.16) TYP o.126 0.02 (3.20 0.05) 2 PLC .450 (11.43) MAX 2 PLC .453 (11.50) 2.041 (51.84) .169 .003 (4.29 0.08) Recommended PCB Layout .085 (2.15) 2 PLC o.035 002 (0.89 0.05) 50 PLC Filter Spring Latch 2 PLC Shown in this view only Top 2.949 .010 (74.90 0.25) 3.264 .015 (82.90 0.38) Screw #4-40 thread 2 PLC 2.511 (63.77) 100 TYP .164 (4.17) 25 1 50 26 .610 .015 (15.50 0.25) .465 (11.81) Filtered Connectors .085 .010 (2.16 0.25) TYP .025 (0.64) TYP .305 .010 (7.75 0.25) TYP CONTACT 50 PLC Boardlock 2 PLC Mating Face Shell Pin Organizer .478 .010 (12.14 0.25) 2 PLC Bottom .126 (o3.20) 2 PLC Filter Position 1 .559 (14.21) Dimensions in inches (mm) Part Number 56-886-002 56-886-003 56-886-004 56-886-005 187 Capacitance Value 100 pF, 20% 220 pF, 20% 470 pF, 20% 820 pF, 20% SPECTRUM CONTROL INC. * 8031 Avonia Rd. * Fairview, PA 16415 * Phone: 814-474-2207 * Fax: 814-474-2208 * Web site: www.spectrumcontrol.com SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 *1566 PRINTER 171-241 v2 12/4/06 9:42 AM Page 15 Filtered Miniature Ribbon Connectors 50 Position Adapter 3.270 (83.06) 2.950 (74.93) .453 (11.51) 2.040 (51.82) .680 (17.27) 2.637 (66.98) .300 (7.62) 1.400 (35.56) Max. Filtered Connectors .780 (19.81) .595 (15.11) Dimensions in inches (mm) Part Number 56-889-002 56-889-003 56-889-004 56-889-005 Capacitance Value 100 pF 15% 220 pF 15% 470 pF 15% 820 pF 15% Hardware options also available. Consult factory for more information. SPECTRUM CONTROL INC. * 8031 Avonia Rd. * Fairview, PA 16415 * Phone: 814-474-2207 * Fax: 814-474-2208 * Web site: www.spectrumcontrol.com SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 188 *1566 PRINTER 171-241 v2 12/4/06 11:30 AM Page 16 Filtered Modular Jack Connectors Equivalent Circuit (Ferrite Version) Impedance (ohm) Typical Impedance vs. Frequency (Ferrite Version) 8-Position 30 20 10 0 1 10 100 Frequency (MHz) 1000 Multi-Port 120 110 100 90 80 70 60 Impedance (ohm) Protecting signals from electromagnetic interference (EMI) is now more important than ever. Spectrum Control gives you more choices in keeping your signals clean and free of EMI. Whatever the level of protection your application requires, we offer signal conditioning products that meet any level of price and performance. These compact, low-cost, filtered printed circuit board RJ45 modular jack connectors from Spectrum Control offer an inexpensive way to protect equipment from conducted and radiated electromagnetic interference (EMI), while meeting all appropriate performance requirements. Offering compact size and high reliability, these new connectors are fully intermateable and interchangeable with existing standard product. The low profile and narrow width of the multi-port style allows more ports to be packed into less space. Ferrite filtered versions can be supplied in fully shielded, partially shielded or unshielded versions. Redundant shielding tabs ensure that a low impedance ground path is maintained across the interface; tabs are available in board-ground or panel-ground versions, with panel-ground jacks also incorporating board-ground legs. These flame retardant polyester thermoplastic connectors are compatible with wave solder environments, and employ duplex plated contacts with solder tails. Modular jack connectors assist with FCC Part 15 A & B; and CISPR 22 compliance. Applications for this type of connector are widely diversified and include: LANs, WANs, network cards, broadband transmission equipment, workstations, peripherals, fax/modems, copy machines and multiplexing. 50 40 30 20 10 Filtered Connectors Features I I I I I I I I I 189 Lower installed cost Assists with FCC Part 15 A & B; and CISPR 22 compliance Drop-in replacement, matched footprint All circuit lines protected Inductor or capacitor versions Available with two grounding options - PCB or parallel Unshielded, partial or fully shielded versions Certified by Canadian Standards Association File No. LR 7189 Certified by Underwriters Laboratories, Inc., File Number E81956 0 1 10 100 Frequency (MHz) 1000 SPECTRUM CONTROL INC. * 8031 Avonia Rd. * Fairview, PA 16415 * Phone: 814-474-2207 * Fax: 814-474-2208 * Web site: www.spectrumcontrol.com SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 *1566 PRINTER 171-241 v2 12/4/06 9:42 AM Page 17 Filtered Modular Jack Connectors Ordering Information Example: 56-A52-002-1130 56 - A 5 2 - Modular Jack 002 - 1 1 3 0 Filtering Grounding 000 = No Filter 001 = Ferrite 0 = Panel Ground 1 = PCB Ground 2 = Customer Specified Filtered D-Subminiature Connectors Multi Port Only 0 = N/A 1 = +.180 Side Ground 2 = -.120 Side Ground Type Shell Size 1 = 8 Position/1 Port 2 = 8 Position/2 Port 3 = 8 Position/4 Port 4 = 8 Position/6 Port 5 = 8 Position/8 Port 6 = 6 Position/1 Port 1 = Multi Port, No Shield 2 = Multi Port, Shielded 3 = Low Profile, No Shield, No Panel Stops 4 = Low Profile, Panel Stops 5 = Low Profile, Partial Shielded 6 = Low Profile, Extended Shield 7 = Low Profile, Full Shield 8 = Coupled Multi Port Only 0 = N/A 3 = 3 Ground TAB 5 = 5 Ground TAB Options K = Keyed (low profile) 0 = N/A Note: Not all configurations available for every size, consult factory for availability Typical Dimensions Filtered Connectors For 56-A17-002-0000 Dimensions in inches (mm) SPECTRUM CONTROL INC. * 8031 Avonia Rd. * Fairview, PA 16415 * Phone: 814-474-2207 * Fax: 814-474-2208 * Web site: www.spectrumcontrol.com SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 190 *1566 PRINTER 171-241 v2 12/4/06 9:42 AM Page 18 Filtered Modular Jack Connectors Typical Dimensions For 56-A18-005-1000 Vertical Mod Jack Photo of vertical and ganged mod jacks Dimensions in inches (mm) Typical Dimensions Filtered Connectors For 56-A52-002-0130 Ganged Mod Jack Dimensions in inches (mm) 191 SPECTRUM CONTROL INC. * 8031 Avonia Rd. * Fairview, PA 16415 * Phone: 814-474-2207 * Fax: 814-474-2208 * Web site: www.spectrumcontrol.com SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 *1566 PRINTER 171-241 v2 12/4/06 9:42 AM Page 19 Filtered Mini-DIN Connectors Filtered mini-DIN connectors are available in several configurations and sizes. These are "drop-in" replacements for standard unfiltered connectors with matched footprints. Housings are made of high temperature UL94V-0 rated thermoplastic material. Connectors are available with full metal shields and kinked or straight ground tabs. Each size can be shielded or filtered with ferrites. Primary applications are in computer keyboard and mouse connections. Features Specifications Contacts . . . . . . . . . . . . . . . . . .Copper alloy, gold over nickel plating Shield . . . . . . . . . . . . . . . . . . . .Brass, tin plated I Audio, video and computer equipment Housing . . . . . . . . . . . . . . . . . .94V-0 rated thermoplastic, black I Drop-in replacement for unfiltered connectors Current rating . . . . . . . . . . . . . .1A @ 12 VDC I Shielded, ferrite or capacitive filtering DWV . . . . . . . . . . . . . . . . . . . .500 VDC Insulation Resistance . . . . . . . . .500MOhms min Operating Temp . . . . . . . . . . . . .-25C to +70C Typical Ferrite Impedance . . . . . .20-22 Ohm @ 100 MHz Ordering Information Example: 56-B32-000-S - B 3 2 Mini-DIN Filtered Connectors Shell Size - 000 - S Filtering Filter Values Features 1 = None 2 = Ferrite 000 = None or Ferrite S = Straight Ground Tab K = Kinked Ground Tab FS = Full Shield & Straight Ground Tab FK = Full Shield & Kinked Ground Tab 1 = 4 Position 2 = 5 Position 3 = 6 Position 4 = 7 Position 5 = 8 Position Filtered Connectors 56 Typical insertion loss . . . . . . . . .32 db @ 200 MHz Typical Dimensions For 56-B32-000-S 5 8 2 1 3 6 Dimensions in inches (mm) SPECTRUM CONTROL INC. * 8031 Avonia Rd. * Fairview, PA 16415 * Phone: 814-474-2207 * Fax: 814-474-2208 * Web site: www.spectrumcontrol.com SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 192 *1566 PRINTER 171-241 v2 12/4/06 9:42 AM Page 21 193 *1566 PRINTER 171-241 v2 12/4/06 9:42 AM Page 22 The industry wide adoption of connector standards for computer peripherals has helped facilitate the explosion of consumer electronics technology. The resulting Universal Serial Bus (USB) connector allows for high-speed, easy connection of an ever-increasing range of peripherals to a PC and to each other. Today, there are several standards governing USB connectors. The original USB 1.0 has been supplemented by USB 2.0, which passed in 2000. USB 2.0 allows for significantly higher data transfer rates, 480 megabits per second (MPS) vs. only 12 MPS under USB 1.0. Additionally, in 2002 USB On-The-Go (OTG) was introduced to further extend these connectors to dual-role devices that can act as a host or peripheral. All of these standards have yielded devices that are much easier to install and can be freely connected and disconnected without rebooting the computer system. Plug-and-Play Devices put your computer at RISK! USB PORTS PRINTERS The Need for EMI & ESD Protection Filtered Connectors Inherent in the development of more plug-and-play devices with hot-plug capability is greater risk of system exposure to electromagnetic interference (EMI) and electrostatic discharge (ESD). Both of these phenomenon can cause transmission signal degradation, loss of data, system lock-up, and permanent hardware damage. As system circuitry has gotten more complex to accommodate faster transfer speeds and smaller package sizes, greater potential exists for damage from EMI and ESD occurrences. The USB 2.0 spec calls for EMI and ESD protection according to industry specifications. This protection has become more of a challenge as less space is available for components and smaller IC chips are more susceptible to low level damage. 194 SCANNERS USB HUBS A Better Solution... Filtering at the Connector Spectrum Control has developed a series of USB connectors that incorporates EMI and ESD filters into an industry standard USB package. By moving the EMI filtering or ESD protection to the USB connector, designers can freeup valuable PC board space for other components and provide better protection for the entire device. These connectors are drop-in replacements for unfiltered connectors making them ideal solutions for the ongoing miniaturization of peripheral devices. Spectrum's EMI filtered and ESD protected USB connectors also can eliminate the need to redesign PC boards in the event of noncompliance during either EMC or ESD testing. Various models of these connectors meet the requirements of USB 1.1 or USB 2.0 specifications and all are RoHS compliant. CELL PHONES MP3 PLAYERS DIGITAL CAMERAS Applications * * * * * * EMI/RFI Sensitive Electronics Test and Measurement Equipment Notebook Computers & Peripherals Home Entertainment & Multimedia Industrial Controls Data Acquisition SPECTRUM CONTROL INC. * 8031 Avonia Rd. * Fairview, PA 16415 * Phone: 814-474-2207 * Fax: 814-474-2208 * Web site: www.spectrumcontrol.com SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 *1566 PRINTER 171-241 v2 12/4/06 9:42 AM Page 23 EMI Filtered USB Connectors Series USB-F Electrical Specifications Operating Temperature . . . . . . . . . . -55C to +125C Working Voltage . . . . . . . . . . . . . . . 5 VDC Current Rating . . . . . . . . . . . . . . . . . 1 Amp max. Contact Resistance . . . . . . . . . . . . 30 m max. Temperature Range . . . . . . . . . . . . -40C to +71C Capacitive Filtered Capacitance . . . . . . . . . . . . . . . . . . 100pF Dielectric withstand voltage . . . . . . 125vDC Capacitive Filters for USB 1.1 Inductive Filtered Common mode impedance . . . . . . . 90 25% @ 100MHz IR . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 M min. DC Resistance . . . . . . . . . . . . . . . . 0.30 max. 56FU04-004 - socket right angle through hole connector 7.12 (.280) 5.12 (.202) 13.65 (.537) 14.50 (.571) 12.50 (.492) 6.90 (.272) 2.08 (.082) 2.84 (.112) .65 (.026) 2.50 (.098) 7.00 (.276) Material Shell: Brass, nickel plated 10.28 (.405) 56FU04-004SM - socket-right angle surface mount connector 7.12 (.280) 5.12 (.202) 13.65 (.537) 14.50 (.571) 12.50 (.492) Inductive Filters for USB 2.0 7.12 (.280) 5.12 (.202) 17.25 (.679) Max. 2.00 (.079) 10.28 (.405) 13.14 (.517) 2.71 (.107) 56FU04-004TPM - socket right angle through hole connector with panel mount tabs 10.28 (.405) 13.14 (.517) #4-40 THREADS, 2 PL 56FU04-020SM - socket-right angle surface mount connector 7.12 (.280) 5.12 (.202) 17.25 (.679) Max. 14.50 (.571) 12.50 (.492) 7.20 (.283) 2.08 (.082) POS. 1 4.32 (.170) 24 (.944) 20 (.787) 12.5 (.492) 4.00 (.157) 7.0 (.276) 5.12 (.202) 13.65 (.537) 0.89 (.035) REF. POS. 4 3.6 (.141) 15.75 (.620) DIMENSION FROM BOTTOM EDGE OF PLASTIC 10.2 (.401) 4.55 (.179) Filtered Connectors 2.84 (.112) 2.00 (.079) 1.75 (.069) .65 (.026) 2.50 (.098) 7.00 (.276) 7.20 (.283) 2.08 (.082) .65 (.026) 2.50 (.098) 7.00 (.276) 6.90 (.272) 2.08 (.082) 56FU04-020 - socket right angle through hole connector 14.50 (.571) 12.50 (.492) 2.71 (.107) 13.14 (.517) Insulator: Thermoplastic, UL94V-0, reflow compatible Contacts: Phosphor bronze, gold flash over nickel 2.00 (.079) Note: Additional capacitor values available. Consult factory. .65 (.026) 2.50 (.098) 7.00 (.276) 1.75 (.069) 2.00 (.079) 10.28 (.405) 13.14 (.517) Note: ESD protection can be added to the 2.0 versions as an option Custom styles and configurations available. Consult factory. SPECTRUM CONTROL INC. * 8031 Avonia Rd. * Fairview, PA 16415 * Phone: 814-474-2207 * Fax: 814-474-2208 * Web site: www.spectrumcontrol.com SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 195 *1566 PRINTER 171-241 v2 12/4/06 9:42 AM Page 24 ESD Protected USB Connectors Series USB-E Electrical Specifications Operating Temperature . . . . . . . . . . . -55C to +125C Working Voltage . . . . . . . . . . . . . . . . 5 VDC Current Rating . . . . . . . . . . . . . . . . . . 1 Amp max. Contact Resistance . . . . . . . . . . . . . . 30 m max. Temperature Range . . . . . . . . . . . . . -40C to +71C Protection Schematic VBUS D+ DGND Reverse standoff voltage . . . . . . . . . 5 Volts Junction capacitance, I/O to GND . . 10pF max. (3pF max. for 56FU24-E01) TVS TVS Clamping voltage . . . . . . . . . . . . . . . Ipp=1A, tp=8/20us, 9.8 Volts (15 Volts for 56FU24-E01) TVS Reverse breakdown voltage . . . . . . . 6 Volts 56FU04-E01 - socket-right angle through hole connector with TVS diodes POSITION 1 Material 7.12 (.280) 5.12 (.202) 13.65 (.537) 14.50 (.571) 12.50 (.492) Shell: Brass, nickel plated 6.90 (.272) 2.08 (.082) Insulator: Thermoplastic, UL94V-0, reflow compatible 2.84 (.112) Contacts: Phosphor bronze, gold flash over nickel .65 (.026) 2.50 (.098) 7.00 (.276) 2.00 (.079) 2.71 (.107) 10.28 (.405) 13.14 (.517) 56FU24-E01 - stacked socket-right angle through hole 56FU04-E01SM - socket right angle surface mount connector with TVS diodes connector with TVS diodes POSITION 1, TOP POSITION 1 14.50 (.571) 12.50 (.492) 7.12 (.280) 5.12 (.202) 13.65 (.537) 14.50 (.571) 12.50 (.492) 17.00 (.669) 10.02 (.394) 3.34 (.131) 15.40 (.606) Filtered Connectors 196 .65 (.026) 2.50 (.098) 7.00 (.276) 2.00 (.079) 1.75 (.069) .65 (.026) 2.50 (.098) 7.00 (.276) 2.71 (.107) 5.68 (.224) 13.14 (.517) 6.90 (.272) 2.08 (.082) 15.62 (.615) 3.03 (.119) 3.89 (.153) 2.00 (.079) 10.28 (.405) 13.14 (.517) 10.28 (.405) Custom styles and configurations available. Consult factory. SPECTRUM CONTROL INC. * 8031 Avonia Rd. * Fairview, PA 16415 * Phone: 814-474-2207 * Fax: 814-474-2208 * Web site: www.spectrumcontrol.com SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 *1566 PRINTER 171-241 v2 12/4/06 9:42 AM Page 25 D-Subminiature Adapter Test Kit & Hardware Adapter Test Kit Specially designed for EMI evaluation process I Male/female adapter part I Easily plugged into equipment under testing conditions Hardware I Ideal for new products and retrofitting Designed to provide simple and effective mounting I Each adapter test kit includes: Hexagonal Spacer Adapter Test Kit I 20 filtered adapters I Tapped spacer fits between flanges I Four shell sizes 9, 15, 25 and 37 I Provide retrofit of 4-40" threads I Four filter ranges: Series 700 - 310 pF Pi I Series 100 - 100 pF Two spacers per adapter required, packaged in bulk - 830 - 470 pF FT Hexagonal Spacer pF - 1000 pF Pi - 1000 pF - 4000 pF Pi - 5600 pF Adapter Ordering Information Filtered Connectors Description 197 .120 Thru-hole Hexagonal Spacer #4-40 UNC Thru-hole Spectrum Part Number Adapter test kit 56-700-002 Adapter test kit with Jackscrew Includes 40 pcs. 56-201-006 56-700-002-JS Hexagonal Spacer 56-201-001 (1 per) Jackscrew Mounting Hardware I Male/female jackscrews I Standard 4-40 threads for compatibility Jackscrew Mounting Hardware For .312" (7.92 mm) length 56-201-004 (1 per) I Two male thread lengths available Jackscrew Mounting Hardware For .688" (17.47 mm) length 56-201-006 (2 per) I Two screws per adapter required Series 100 adapter test kit 56-100-002 I Lockwasher included, packaged in bulk Tubular Spacer 56-201-003 (1 per) SPECTRUM CONTROL INC. * 8031 Avonia Rd. * Fairview, PA 16415 * Phone: 814-474-2207 * Fax: 814-474-2208 * Web site: www.spectrumcontrol.com SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 *1566 PRINTER 171-241 v2 12/4/06 9:42 AM Page 26 Waved Metal Gaskets Proper mounting of an EMI filter is critical to achieving optimum filtering performance. For applications requiring very high attenuation, it is necessary to fill the gaps at the mounting surface-to-connector interface. The length of any gap must be short, relative to the wavelength of the signal to be attenuated. Spectrum Control supplies a line of "waved" gaskets. This design ensures the maximum "gap length" will not exceed the wave pitch, .200" (5.08mm), even on surfaces with poor flatness. This ensures maximum filter performance to 1GHz and beyond. Waved Metal Grounding/Shielding Gasket (shown in free state) Front Mount Specifications Material. . . . . . . . . . . . . . . ..................... Finish . . . . . . . . . . . . . . . . ..................... ..................... Material Thickness. . . . . . . . . . . . . . Wave Height . . . . . . . . . . . . . . . . ..................... Length increase when flattened . . . . . . . . . . Beryllium Copper, CA 172 (per QQ-C-533) -70 Electro tin plate, 100 micro inches (per MIL-T-10727) NI nickel plated, AU gold plated Rear Mount Wave Height .005" (.13mm) compressed .030"+.020/-.015 (.76+.51/-.38mm) 0.008" (.20mm) per inch Ordering Information Select part number by filling in "xxx": 572019-00xxx-70 Mounting: Front mounted pin or socket connector, rear mounted pin connector. Shell Size Filtered Connectors 9 15 25 37 50 A .020 (0.51) B .020 (0.51) C .020 (0.51) D .020 (0.51) E .005 (0.13) 1.213 (30.81) 1.541 (39.14) 2.088 (53.04) 2.729 (69.32) 2.635 (66.93) .984 (24.99) 1.312 (33.32) 1.852 (47.04) 2.500 (63.50) 2.406 (61.11) .777 (19.74) 1.105 (28.07) 1.645 (41.78) 2.293 (58.24) 2.190 (55.63) .600 (15.24) .600 (15.24) .600 (15.24) .600 (15.24) .710 (18.03) .440 (11.18) .440 (11.18) .440 (11.18) .440 (11.18) .550 (13.97) C "xxx" 100 9 15 25 37 50 E D 101 102 B 103 A 104 Mounting: Rear mounted socket connectors only. Shell Size .120 (3.05) D A .020 (0.51) B .020 (0.51) C .020 (0.51) D .020 (0.51) E .005 (0.13) F .005 (0.13) G .020 (0.51) 1.213 (30.81) 1.541 (39.14) 2.088 (53.04) 2.729 (69.32) 2.635 (66.93) .984 (24.99) 1.312 (33.32) 1.852 (47.04) 2.500 (63.50) 2.406 (61.11) .450 (11.43) .670 (17.02) 1.110 (28.19) 1.550 (39.37) 1.550 (39.37) .660 (16.76) .988 (25.10) 1.528 (38.81) 2.176 (55.27) 2.082 (52.88) .324 (8.23) .324 (8.23) .324 (8.23) .324 (8.23) .436 (11.07) .360 (9.14) .360 (9.14) .360 (9.14) .360 (9.14) .470 (11.94) .600 (15.24) .600 (15.24) .600 (15.24) .600 (15.24) .710 (18.03) "xxx" C .120 (3.05) 105 E F G 106 107 B 108 A 109 Dimensions in inches (mm) 198 SPECTRUM CONTROL INC. * 8031 Avonia Rd. * Fairview, PA 16415 * Phone: 814-474-2207 * Fax: 814-474-2208 * Web site: www.spectrumcontrol.com SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 *1566 PRINTER 171-241 v2 12/4/06 9:42 AM Page 27 Hooded Strain Reliefs Hooded strain reliefs are used whenever a connector is used on a cable assembly which will be exposed to users and subject to multiple disconnects. Hoods are designed to protect users from shock hazard by exposed solder joints, as well as provide a strain relief for the wires and protection against accidental short circuits. Since most filter connectors are larger than standard connectors, there had been a problem fitting most commercially available hoods. Spectrum Control solves this problem. Our hoods are molded of thin wall plastic, providing extra internal space to accommodate larger filter connectors. The hood is constructed of extremely durable polycarbonate and meets the flammability requirements for UL94V-0. In addition, hoods are ideal for use on applications which require the use of extra components such as resistors or varistors on the wires. The nonconductive hood conveniently houses the connector, components, and protects any joints. I 2560-9000-XX is supplied with metal retention clips to hold the connector within the hood assembly. This item is recommended for use with Spectrum Filtered D-subs, most other filtered D-subs, and most standard D-subs. I 2560-9001-XX is meant to be used with a connector which has a special eyelet on the mounting flange. This feature is available as an option on the Spectrum Filtered D-sub. Contact factory for additional information. #2560-9000-XX #2560-9001-XX Retention Clip Version "Eyelet" (For use with "Eyelet" connectors) (For use with most connectors) Hood Hood Captive Screw Captive Screw Clip Eyelet Connector Flange Connector Flange with Optional Eyelet Part Number Connector Size A .005 B Max C Max D Max E Max F Max 9 0.984 (24.99) 1.228 (31.19) 1.710 (43.43) 0.985 (25.02) .685 (17.40) .240 (6.07) E 2560-9000-01 2560-9001-01 D F 2560-9000-02 2560-9001-02 15 1.312 (33.33) 1.556 (39.52) 1.710 (43.43) 1.310 (26.71) .685 (17.40) Cable Tie (Not Supplied) .300 (7.62) C 2560-9000-03 2560-9001-03 25 1.852 (47.04) 2.103 (53.42) 1.710 (43.43) 1.850 (46.99) .685 (17.40) .400 (10.16) 2560-9000-04 2560-9001-04 37 2.500 (63.50) 2.744 (69.70) 1.710 (43.43) 2.500 (63.50) .685 (17.40) .400 (10.16) Filtered Connectors Ordering Information and Dimensions A B Dimensions in inches (mm) SPECTRUM CONTROL INC. * 8031 Avonia Rd. * Fairview, PA 16415 * Phone: 814-474-2207 * Fax: 814-474-2208 * Web site: www.spectrumcontrol.com SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 199 *1566 PRINTER 171-241 v2 12/4/06 9:42 AM Page 28 Custom Engineered Solutions Despite the breadth of our filtered connector product line, there exist certain applications which demand a custom EMC solution. Our engineering staff will work with your design team to provide a custom filtered connector which meets your individual requirements. Examples of custom projects are shown below. Special Mounting Flanges & Value-added Special Mounting Flanges I Housings can be designed to be integrated into the customer's equipment. The housings are constructed of machined materials, or precision diecast zinc. Value-added Assemblies I Spectrum's capabilities extend beyond just supplying filter connectors. Additional operations such as sourcing and assembling flexible circuits, adding flying leads, or making connector to connector assemblies, all can be provided in conjunction with the filter connector. Custom Filter Arrangements I Custom Filter Arrangements & Connectors Complex filters involving unbalanced Pi types, LC types with large inductive components, special pin-in to pin-out translations, and overvoltage protective devices such as diodes and varistors can be packaged within the connector. Other Connector Formats Filtered Connectors I Manufacturer specific connectors also can be filtered. Our involvement ranges from complete design to implementing minor modifications to include the addition of the filter components. Medical equipment and hand-held devices are examples of excellent applications for these connectors. VDE RS232 connector Tempest VGA connector adapter 200 FCC VGA connector adapter SPECTRUM CONTROL INC. * 8031 Avonia Rd. * Fairview, PA 16415 * Phone: 814-474-2207 * Fax: 814-474-2208 * Web site: www.spectrumcontrol.com SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 *1566 PRINTER 171-241 v2 12/4/06 9:42 AM Page 29 Filtered Connector Performance Specifications The filtered D-subminiature connectors shown in this catalog have been designed and tested to the following test plan. I Order of Test Examination of Test Test Method Post Test Requirements 1 Visual and Mechanical Examination 2 Materials, Designs Construction and Workmanship 3 Physical Dimensions and Marking 4 Capacitance MIL-STD-202 Method 305 1 KHz, 1VRMS max. 25C WIthin specified tolerance. 5 Dielectric Withstanding Voltage MIL-STD-202 Method 301 No breakdown or damage. 6 Insulation Resistance MIL-STD-202 Method 302, test condition at rated voltage 5000 megohm minimum. 7 Insertion Loss MIL-STD-220 No load In accordance with applicable requirements. 1 Contact Engagement and Separation MIL-C-24308, Para. 3.5.10 Maximum engagement force 18.0 oz., minimum separation force 0.7 oz. 2 Mating and Unmating Force MIL-C-24308, Para. 3.5.4 MIL-C-24308, Para. 3.5.4 Table II Limits: Shell size 1-5, class G only. 3 Durability MIL-C-24308, Para. 3.5.16, 4.7.18, except 100 cycles MIL-C-24308, Para. 3.5.9 Contact resistance at 1 amp. 20 millohms max. 4 Thermal Shock MIL-STD-202 Method 107, Test condition B, -55C to +125C No evidence of damage. Insulation resistance not less than 2500 megohms. 5 Solderability MIL-STD-202; Method 208, RMA-Flux Terminals shall meet solderability requirements. 6 Moisture Resistance MIL-STD-202 Method 106, less step seven Insulation resistance not less than 500 megohms. Meet dielectric withstanding voltage requirements. 7 Resistance to Soldering Heat MIL-STD-202 Method 210, Test condition D Insulation resistance not less than 500 megohms. Meet dielectric withstanding voltage requirements. 1 Vibration MIL-STD-202 Method 204, Test condition D, 100 mA, current No interruption of current flow longer than 1 microsecond. Insulation resistance greater than 5000 megohms. II In accordance with applicable requirements. No interruptions of current flow longer than 1 microsecond. 2 Shock III MIL-STD-202 Method 213. Test Condition G, 100 mA, current Contact resistance at 1 amp. 15 millohms max. Capacitance within specified limits. Filtered Connectors Test Group The information shown can be used as a basis for your filtered connector specifications. (Contact Spectrum Control for additional details.) Insulation resistance greater than 2500 megohms. IV 3 Mounting Inserts a. Prevailing torque (locking) b. Installation torque (locking) c. Push-out Force IFI-100 a. 3 inch-pounds max. b. 6 inch-pounds without damage c. 10 pounds axial force without loosening insert 1 Life MIL-STD-202 Method 108, Test condition D, within 125% of rated voltage at the maximum operating temperature. Filter shall meet all initial requirements except insulation resistance shall not be less than 500 megohms. SPECTRUM CONTROL INC. * 8031 Avonia Rd. * Fairview, PA 16415 * Phone: 814-474-2207 * Fax: 814-474-2208 * Web site: www.spectrumcontrol.com SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 201 *1566 PRINTER 171-241 v2 12/4/06 9:42 AM Page 30 Board & Panel Cutouts B B I E I E F G H J J F G .590 (14.99) .315 (8.00) D C D C A Front of Flange A Printed Circuit Vertical Board Mount (standard density) H Printed Circuit Right Angle Mount (standard density) Board Layout (Pin and Socket Contact) for Standard D-Sub Connectors Shell Size A B C D 9 (0) .984 (25.00) .436 = 4 x .109 (11.07) (2.77) .327 = 3 x .109 (8.31) (2.77) .492 (12.50) 15 (1) 1.312 (33.32) .763 = 7 x .109 (19.38) (2.77) .654 = 6 x .109 (16.61) (2.77) .656 (16.66) 25 (2) 1.852 (47.04) 1.308 = 12 x .109 (33.22) (2.77) 1.199 = 11 x .109 (30.45) (2.77) .926 (23.52) 37 (3) 2.500 (63.50) 1.962 = 18 x .109 (49.83) (2.77) 1.853 = 17 x .109 (47.07) (2.77) 1.250 (31.75) 0.112 2 rows 2.406 (61.11) 1.744 = 16 x .109 (44.30) (2.77) 2 rows 1.635 = 15 x .109 (41.35) (2.77) 1 row 1.203 (30.56) 0.00 1 row Filtered Connectors 50 (4) E F H I (Dia.) J .125 (3.18) .045 (1.14) .054 (1.37) G PCB Mount .056 (1.42) .109 (2.77) .112 (2.84) PCB Mount Rt Angle .275 (6.99) Panel Cutouts (Front or Rear Mounting) for Standard and Hi-Density D-Sub Connectors Shell Size A .015 (.38) B .015 (.38) C .015 (.38) D .015 (.38) E .003 (.08) F .005 (.13) G .002 (.05) 9 (0) .984 (24.99) .492 (12.49) .777 (19.74) .388 (9.87) .440 (11.18) .220 (5.59) .150 (3.81) 15 (1) 1.312 (33.32) .656 (16.66) 1.105 (28.07) .552 (14.03) .440 (11.18) .220 (5.59) .150 (3.81) 25 (2) 1.852 (47.04) .926 (23.52) 1.645 (41.78) .822 (20.89) .440 (11.18) .220 (5.59) .150 (3.81) 37 (3) 2.500 (63.50) 1.250 (31.75) 2.293 (58.24) 1.146 (29.12) .440 (11.18) .220 (5.59) .150 (3.81) 50 (4) 2.406 (61.11) 1.203 (30.55) 2.190 (55.63) 1.095 (27.81) .550 (13.97) .275 (6.98) .150 (3.81) .125 Dia. (3.18 Dia.) 2 holes 10 C D E G B F A Front Mounting Panel Rear Mounting Panel Panel Cutouts Dimensions in inches (mm) 202 SPECTRUM CONTROL INC. * 8031 Avonia Rd. * Fairview, PA 16415 * Phone: 814-474-2207 * Fax: 814-474-2208 * Web site: www.spectrumcontrol.com SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 *1566 PRINTER 171-241 v2 12/4/06 9:42 AM Page 31 Board & Panel Cutouts 15 Hi-Density Pin/PCB 15 Hi-Density Socket/Right Angle .040 (1.02) O 15 holes .040 (1.02) O 15 holes 1 .040 (1.02) O 15 holes .045 (1.14) Connector 26 Hi-Density Pin/PCB C L .090 (2.29) Typ. .045 (1.14) .090 (2.29) Typ. Connector .045 (1.14) Connector CL CL .010 (.25) 1 .100 (2.54) Typ. Front Face of Connector Flange .010 (.25) 1 .078 (1.98) Typ. .090 (2.29) Typ. .020 (.51) .078 (1.98) Typ. .450 (11.43) 26 Hi-Density Socket/PCB 44 Hi-Density Pin/PCB 44 Hi-Density Socket/PCB .040 (1.02) O 44 holes .040 (1.02) O 15 holes .045 (1.14) Connector .125 (3.18) O 2 holes C L 1 .090 (2.29) Typ. .040 (1.02) O 44 holes .045 (1.14) Connector .045 (1.14) C L C L Connector .020 (.51) .020 (.51) .020 (.51) .090 (2.29) Typ. .090 (2.29) Typ. 1 .078 (1.98) Typ. 1 .078 (1.98) Typ. 62 Hi-Density Socket/PCB .040 (1.02) O 62 holes 78 Hi-Density Socket/PCB Pin/PCB .040 (1.02) O 62 holes 1 .040 (1.02) O 78 holes .095 (2.41) Typ. .0475 (1.21) Connector C L Connector .023 (.58) .095 (2.41) Typ. 1 (Pin/PCB) C L Connector .023 (.58) C L .095 (2.41) Typ. .0475 (1.21) Filtered Connectors 62 Hi-Density Pin/PCB .078 (1.98) Typ. 1 .078 (1.98) Typ. .078 (1.98) Typ. .041 (1.04) 1 (Socket/ PCB) .082 (2.08) Typ. Dimensions in inches (mm) SPECTRUM CONTROL INC. * 8031 Avonia Rd. * Fairview, PA 16415 * Phone: 814-474-2207 * Fax: 814-474-2208 * Web site: www.spectrumcontrol.com SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 203 *1566 PRINTER 171-241 v2 12/4/06 9:42 AM Page 32 Figure A (1) Custom Filtered Connectors MIL and High Reliability C Filter Spectrum Control offers a premium line of custom and specialty filtered connectors. These custom high reliability, circular, rack and panel and ARINC connectors have a reputation for superior quality and performance. Several types of filtering are available (See figure at right). Figure B (2) CL Filter EMI Filter Performance Figure C (3) The performance indicated in this table are examples for design guidelines. Insertion values are per MILSTD-220 (No Load). Resistance LC Filter Termination End Insulation Resistance. . . . . . . . . . . . . . 5 Gigohm min. D.C. Resistance . . . . . . . . . . . . . . . . 30 Milliohm max. Figure D (4) Pi Filter Electrical Characteristics Minimum Insertion Loss (dB) Working Voltage Filtered Connectors Figure B & C Figure D Cut-Off 1 10 100 500 1000 Cut-Off 1 10 100 500 1000 Cut-Off 1 10 100 500 1000 Freq. (MHz) MHz MHz MHz MHz MHz Freq. (MHz) MHz MHz MHz MHz MHz Freq. (MHz) MHz MHz MHz MHz MHz DC 85C AC 85C DWV (VOC) 1,000 200 115 500 5 -- 4 21 34 39 5 -- 5 23 36 42 5 -- 4 28 54 65 2,000 200 115 500 1 -- 9 26 39 44 1 -- 10 29 42 47 1 -- 8 39 65 70 3,000 200 115 500 1 -- 12 30 43 48 1 -- 13 36 45 51 1 -- 11 47 70 70 5,000 200 115 500 1 1 16 34 46 52 1 1 17 37 49 54 1 1 14 54 70 70 7,000 200 115 500 1 3 19 37 49 55 1 3 20 39 52 57 1 3 18 60 70 70 10,000 200 115 500 1 4 21 39 52 57 1 4 22 41 54 60 1 4 22 64 70 70 20,000 100 -- 250 .50 9 26 44 57 62 .50 9 28 47 60 65 .50 9 33 70 70 70 Capacitance (pF, GMV) 204 Figure A Consult Spectrum Control for availability of alternative capacitance values. SPECTRUM CONTROL INC. * 8031 Avonia Rd. * Fairview, PA 16415 * Phone: 814-474-2207 * Fax: 814-474-2208 * Web site: www.spectrumcontrol.com SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 *1566 PRINTER 171-241 v2 12/4/06 9:42 AM Page 33 Compact Shell Filtered Connectors MIL-C-38999 Filtered Connector, Compact Shell This design is for the MIL-C-38999 connector series I, II, and III. The shell is constructed out of a single piece of metal and contains planar capacitors. The dimensions are the same as the unfiltered MIL qualified connector. The compact shell filtered connectors offer designers an effective filtering device that reduces the amount of real estate required within a product enclosure. These connectors are available with mixed capacitance filtered lines within the connector as well as insulated and/or grounded lines. Some capacitance levels may not be available in all connector sizes. Please consult factory for specific applications. Compact shell filtered connectors provide a simple and space-efficient solution to a complex EMI problem. More detailed information on compact shell connectors is located on pages 206-211. Advantages of Spectrum's Compact Shell Design I Easy retrofit or upgrade Our compact shell connector is the only MIL filtered connector which is the same size as an unfiltered connector . . . allowing for easy retrofit or upgrade without concerns for space availability. I Weight and space savings Smaller physical size is ideal for many applications, especially airborne. I Reduced cost and lead times Standardized design for most contact arrangements minimizes tooling required (often none) . . . reducing procurement costs and facilitating small order quantities or prototypes. I Design flexibility and quality assurance We are vertically integrated for ceramic filter capacitors, enabling us to offer a broad selection of this critical component and ensuring design versatility and manufacturing control. I Custom designs Optimize your system performance with a custom designed filtered connector. Planar Capacitors Medium Temp Solder Joints Filtered Connectors Interfacial Seal Hard Insert Ferrite Bead Potting For extended shell tubular design, see page 212. SPECTRUM CONTROL INC. * 8031 Avonia Rd. * Fairview, PA 16415 * Phone: 814-474-2207 * Fax: 814-474-2208 * Web site: www.spectrumcontrol.com SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 205 *1566 PRINTER 171-241 v2 12/4/06 9:42 AM Page 34 MIL-C-38999, Compact Shell Ordering Information Materials and Finishes The many benefits of using Spectrum's compact shell design are detailed on page 199. Review the benefits and specifications provided to determine if these space saving connectors will fulfill your requirements. Available connector styles and shell sizes for this MIL series are shown on the following pages. Refer to these pages and the information below to develop your connector part number. Shell. . . . . . . . . . . . . . . . . As noted in Ordering Information Contacts . . . . . . . . . . . . . . . . . . . . Copper Alloy, Gold Plate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . per MIL-G-45204 Seals . . . . . . . . . . . . . . . . . . . . . . . . . . . Elastomer, Silicone Insulator . . . . . . . . . . . . . . . . . . . . . . . . . High Grade Plastic (For electrical specifications, see page 204.) 9 A 2 B 11 Filtered Connector MIL Indicator 9-MIL-C-38999 Compact Shell Finish B- Aluminum Olive Drab Cadmium E- Stainless Steel Passivated Series Indicator A-Series I B-Series II C-Series III F- Aluminum, Electroless Nickel Shell Size Series I&III 9, 11, 13, 15, 17, Shell Style 19, 21, 23, & 25 1- Wall Mount Receptacle Series II (Front Panel Mounting) 8, 10, 12, 14, 16, 2- Box Mount Receptacle Series 18, 20, 22, & 24 I&II (Front Panel Mounting) 3- Jam Nut Receptacle 4- Wall Mount Receptacle Series I&II (Back Panel Mounting) 5- Box Mount Receptacle Series I&II (Back Panel Mounting) 35 S A 4 Contact Arrangement See Below (last two digits of each number) Alternate Shell Position N- (Normal) A, B, C, D E- Series III only Contact/ Termination Type P- Pin/PC Tail S- Pin/Solder Cup B- Socket/PC Tail N- Socket/Crimp Removable Filter Schematic 1- "C" Feed-thru 2- "CL" 3- "LC" 4- "Pi" 102 M Capacitance Tolerance M = 20% P = -0% +100% (GMV) Filter Capacitance Specify by using EIA codes. Two significant digits plus number of zeros. 102 = 1000pF 401 = 400pF Custom Part Ordering Note: For Filtered Connectors with custom requirements, such as mixed capacitance, insulated lines, ground lines or an unlisted contact arrangement, consult factory for specific part numbers. Filtered Connectors Contact Arrangements (First two digits shell size, second two contact arrangement) #22 Contacts - 5 Amps 2535 128 #22 2335 100 #22 #16 Contacts - 13 Amps 1935 66 #22 1735 55 #22 1535 37 #22 1335 22 #22 1135 13 #22 #20 Contacts - 7.5 Amps 2561 61 #20 206 2355 55 #20 2321 21 #16 Standard Termination available in all Filtered Connectors 2353 53 #20 1726 26 #20 1518 18 #20 1398 10 #20 SPECTRUM CONTROL INC. * 8031 Avonia Rd. * Fairview, PA 16415 * Phone: 814-474-2207 * Fax: 814-474-2208 * Web site: www.spectrumcontrol.com SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 *1566 PRINTER 171-241 v2 12/4/06 9:42 AM Page 35 MIL-C-38999, Compact Shell Series I MS27466 Wall Mount, Front Panel Mounting Shell Size V Thread UNEF-2A A Dia. M H Dia. K R T 9 .572 (14.55) .632 (16.07) .128 (3.26) .085 (2.16) .719 (18.28) .938 (23.85) .4375-18 11 .700 (17.80) .632 (16.07) .128 (3.26) .085 (2.16) .812 (20.65) 1.031 (26.22) .5625-24 13 .850 (21.62) .632 (16.07) .128 (3.26) .085 (2.16) .906 (23.04) 1.125 (28.61) .6875-24 15 .975 (24.79) .632 (16.07) .128 (3.26) .085 (2.16) .969 (24.64) 1.219 (31.00) .8125-20 17 1.100 (27.97) .632 (16.07) .128 (3.26) .085 (2.16) 1.062 (27.01) 1.312 (33.36) .9375-20 19 1.207 (30.69) .632 (16.07) .128 (3.26) .085 (2.16) 1.156 (29.40) 1.438 (36.51) 1.0625-18 21 1.332 (33.87) .602 (15.31) .128 (3.26) .115 (2.92) 1.250 (31.79) 1.562 (39.72) 1.1875-18 23 1.475 (26.91) .602 (15.31) .147 (3.74) .115 (2.92) 1.375 (34.97) 1.688 (42.93) 1.3125-18 25 1.582 (40.23) .602 (15.31) .147 (3.74) .115 (2.92) 1.500 (38.15) 1.812 (46.08) 1.4375-18 See page 200 for Termination Detail Shell Size A Dia M K X Dia. H Dia. R T 9 .572 (14.55) .632 (16.07) .085 (2.16) .469 (11.93) .128 (3.26) .719 (18.28) .938 (23.85) 11 .700 (17.80) .632 (16.07) .085 (2.16) .594 (15.11) .128 (3.26) .812 (20.65) 1.031 (26.22) 13 .850 (21.62) .632 (16.07) .085 (2.16) .719 (18.28) .128 (3.26) .906 (23.04) 1.125 (28.61) 15 .975 (24.79) .632 (16.07) .085 (2.16) .844 (21.46) .128 (3.26) .969 (24.64) 1.219 (31.00) 17 1.100 (27.97) .632 (16.07) .085 (2.16) .969 (24.64) .128 (3.26) 1.062 (27.01) 1.312 (32.36) 19 1.207 (30.69) .632 (16.07) .085 (2.16) 1.078 (27.41) .128 (3.26) 1.156 (29.40) 1.438 (36.57) 21 1.332 (33.87) .602 (15.31) .115 (2.92) 1.203 (30.59) .128 (3.26) 1.250 (31.79) 1.562 (39.72) 23 1.457 (26.91) .602 (15.31) .115 (2.92) 1.328 (33.77) .147 (3.74) 1.375 (34.97) 1.688 (42.93) 25 1.582 (40.23) .602 (15.31) .115 (2.92) 1.453 (36.95) .147 (3.74) 1.500 (38.15) 1.812 (46.08) See page 200 for Termination Detail Dimensions in inches (mm) SPECTRUM CONTROL INC. * 8031 Avonia Rd. * Fairview, PA 16415 * Phone: 814-474-2207 * Fax: 814-474-2208 * Web site: www.spectrumcontrol.com SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 Filtered Connectors MS27496 Box Mount, Front Panel Mounting 207 *1566 PRINTER 171-241 v2 12/4/06 9:42 AM Page 36 MIL-C-38999, Compact Shell Series I MS27468 Jam Nut Shell Size V Thread UNEF-2A F Dia. S Q Dia. W 1.062 (27.01) .655 (16.66) .109 (2.77) 9 .4375-28 1.188 (30.21) 11 .5625-24 1.375 (34.97) 1.250 (31.79) .755 (19.20) .109 (2.77) 13 .6875-24 1.500 (38.15) 1.375 (34.97) .942 (23.96) .109 (2.77) 15 .8125-20 1.625 (41.32) 1.500 (38.15) 1.066 (27.11) .109 (2.77) 17 .9375-20 1.750 (44.50) 1.625 (41.32) 1.191 (30.29) .109 (2.77) 19 1.0625-18 1.938 (49.28) 1.812 (46.08) 1.316 (33.47) .140 (3.56) 21 1.1875-18 2.062 (52.44) 1.938 (49.28) 1.441 (36.64) .140 (3.56) 23 1.3125-18 2.188 (55.64) 2.062 (52.44) 1.566 (39.82) .140 (3.56) 25 1.4375-18 2.312 (58.79) 2.188 (55.64) 1.691 (43.00) .140 (3.56) See page 200 for Termination Detail MS27656 Wall Mount, Back Panel Mounting Filtered Connectors Shell Size V Thread UNEF-2A A Dia. M K L H Dia. R T 9 .572 (14.55) .820 (20.85) .085 (2.16) .469 (11.93) .128 (3.25) .719 (18.25) .938 (23.85) .4375-28 11 700 (17.80) .820 (20.85) .085 (2.16) .469 (11.93) .128 (3.25) .812 (20.65) 1.031 (26.22) .5625-24 13 .850 (21.62) .820 (20.85) .085 (2.16) .469 (11.93) .128 (3.25) .906 (23.04) 1.125 (28.61) .6875-24 15 .975 (24.79) .820 (20.85) .085 (2.16) .469 (11.93) .128 (3.25) .969 (24.64) 1.219 (31.00) .8125-20 17 1.100 (27.97) .820 (20.85) .085 (2.16) .469 (11.93) .128 (3.25) 1.062 (27.01) 1.312 (33.36) .9375-20 19 1.207 (30.69) .820 (20.85) .085 (2.16) .469 (11.93) .128 (3.25) 1.156 (29.40) 1.438 (36.57) 1.0625-18 21 1.332 (33.87) .790 (20.09) .115 (2.92) .500 (12.72) .128 (3.25) 1.250 (31.79) 1.562 (39.72) 1.1875-18 23 1.457 (37.05) .790 (20.09) .115 (2.92) .500 (12.72) .147 (3.74) 1.375 (34.97) 1.688 (42.93) 1.3125-18 25 1.582 (40.23) .790 (20.09) .115 (2.92) .500 (12.72) .147 (3.74) 1.500 (38.15) 1.812 (46.08) 1.4375-18 See page 200 for Termination Detail MS27505 Box Mount, Back Panel Mounting Shell Size A Dia. M K L X Dia. H Dia. R T 9 .572 (14.55) .820 (20.85) .085 (2.16) .469 (11.93) .547 (13.91) .128 (3.25) .719 (18.28) .938 (23.85) 11 .700 (17.80) .820 (20.85) .085 (2.16) .469 (11.93) .656 (16.68) .128 (3.25) .812 (20.65) 1.031 (26.22) 13 .850 (21.62) .820 (20.85) .085 (2.16) .469 (11.93) .828 (21.06) .128 (3.25) .906 (23.04) 1.125 (28.61) 15 .975 (24.79) .820 (20.85) .085 (2.16) .469 (11.93) .953 (24.23) .128 (3.25) .969 (24.64) 1.219 (31.00) 17 1.100 (27.97) .820 (20.85) .085 (2.16) .469 (11.93) 1.078 (27.41) .128 (3.25) 1.062 (27.01) 1.312 (33.36) 19 1.207 (30.69) .820 (20.85) .085 (2.16) .469 (11.93) 1.203 (30.59) .128 (3.25) 1.156 (29.40) 1.438 (36.57) 21 1.332 (33.87) .790 (20.09) .115 (2.92) .500 (12.72) 1.328 (33.77) .128 3.25) 1.250 (31.79) 1.562 (39.72) 23 1.457 (26.91) .790 (20.09) .115 (2.92) .500 (12.72) 1.453 (36.95) .147 (3.74) 1.375 (34.97) 1.688 (42.93) 25 1.582 (40.23) .790 (20.09) .115 (2.92) .500 (12.72) 1.578 (40.13) .147 (3.74) 1.500 (38.15) 1.812 (46.08) See page 200 for Termination Detail Dimensions in inches (mm) 208 SPECTRUM CONTROL INC. * 8031 Avonia Rd. * Fairview, PA 16415 * Phone: 814-474-2207 * Fax: 814-474-2208 * Web site: www.spectrumcontrol.com SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 *1566 PRINTER 171-241 v2 12/4/06 9:42 AM Page 37 MIL-C-38999, Compact Shell Series II MS27508 Box Mount, Back Panel Mounting Shell Size A Dia. AB Dia. R BSC T Dia. S 8 .473 (12.03) .547 (13.91) .297 (7.55) .120 (3.05) .828 (21.06) 10 .590 (15.00) .672 (17.09) .3595 (9.14) .120 (3.05) .954 (24.26) 12 .750 (19.07) .844 (21.46) .406 (10.32) .120 (3.05) 1.047 (26.63) 14 .875 (22.25) .969 (24.64) .453 (11.52) .120 (3.05) 1.141 (29.02) 16 1.000 (25.43) 1.094 (27.82) .4845 (12.32) .120 (3.05) 1.234 (31.38) 18 1.125 (28.61) 1.219 (31.00) .531 (13.50) .120 (3.05) 1.328 (33.77) 20 1.250 (31.79) 1.344 (34.18) .578 (14.70) .120 (3.05) 1.453 (36.95) 22 1.375 (34.97) 1.469 (37.36) .625 (15.89) .120 (3.05) 1.578 (40.13) 24 1.500 (38.15) 1.594 (40.54) .6875 (17.48) .147 (3.74) 1.703 (43.31) See page 200 for Termination Detail MS27497 Wall Mount, Back Panel Mounting V Thread UNEF-2A A Dia. AB Dia. R BSC T Dia. S 8 .473 (12.03) .547 (13.91) .297 (7.55) .120 (3.05) .828 (21.06) .4375-28 10 .590 (15.00) .672 (17.09) .3595 (9.14) .120 (3.05) .954 (24.26) .5625-24 12 .750 (19.07) .844 (21.46) .406 (10.32) .120 (3.05) 1.047 (26.63) .6875-24 14 .875 (22.25) .969 (24.64) .453 (11.52) .120 (3.05) 1.141 (29.02) .8125-20 16 1.000 (25.43) 1.094 (27.82) .4845 (12.32) .120 (3.05) 1.234 (33.77) .9375-20 18 1.125 (28.61) 1.219 (31.00) .531 (13.50) .120 (3.05) 1.328 (36.95) 1.0625-18 20 1.250 (31.79) 1.344 (34.18) .578 (14.70) .120 (3.05) 1.453 (36.95) 1.1875-18 22 1.375 (34.97) 1.469 (37.36) .625 (15.89) .120 (3.05) 1.578 (40.13) 1.3125-18 24 1.500 (38.15) 1.594 (40.54) .6875 (17.48) .147 (3.74) 1.703 (43.31) 1.4375-18 See page 200 for Termination Detail Dimensions in inches (mm) SPECTRUM CONTROL INC. * 8031 Avonia Rd. * Fairview, PA 16415 * Phone: 814-474-2207 * Fax: 814-474-2208 * Web site: www.spectrumcontrol.com SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 Filtered Connectors Shell Size 209 *1566 PRINTER 171-241 v2 12/4/06 9:42 AM Page 38 MIL-C-38999, Compact Shell Series II MS27472 Wall Mount, Front Panel Mounting Shell Size V Thread UNEF-2A A Dia. R BSC T Dia. S 8 .473 (12.03) .297 (7.55) .120 (3.05) .828 (21.06) .4375-28 10 .590 (15.00) .3595 (9.14) .120 (3.05) .954 (24.26) .5625-24 12 .750 (19.07) .406 (10.32) .120 (3.05) 1.047 (26.63) .6875-24 14 .875 (22.25) .453 (11.52) .120 (3.05) 1.141 (29.02) .8125-20 16 1.000 (25.43) .4845 (12.32) .120 (3.05) 1.234 (31.38) .9375-20 18 1.125 (28.61) .531 (13.50) .120 (3.05) 1.328 (33.77) 1.0625-18 20 1.250 (31.79) .578 (14.70) .120 (3.05) 1.453 (36.95) 1.3125-18 22 1.375 (34.97) .625 (15.98) .120 (3.05) 1.578 (40.13) 1.3125-18 24 1.500 (38.15) .6875 (17.48) .147 (3.74) 1.703 (43.31) 1.4375-18 See page 200 for Termination Detail MS27499 Box Mount, Front Panel Mounting Filtered Connectors Shell Size A Dia. R BSC T Dia. S 8 .473 (12.03) .297 (7.55) .120 (3.05) .828 (21.06) 10 .590 (15.00) .3595 (9.14) .120 (3.05) .954 (24.26) 12 .750 (19.07) .406 (10.32) .120 (3.05) 1.047 (26.63) 14 .875 (22.25) .453 (11.52) .120 (3.05) 1.141 (29.02) 16 1.000 (25.43) .4845 (12.32) .120 (3.05) 1.234 (31.38) 18 1.125 (28.61) .531 (13.50) .120 (3.05) 1.328 (33.77) 20 1.250 (31.79) .578 (14.70) .120 (3.05) 1.453 (36.95) 22 1.375 (34.97) .625 (15.89) .120 (3.05) 1.578 (40.13) 24 1.500 (38.15) .6875 (17.48) .147 (3.74) 1.703 (43.31) See page 200 for Termination Detail MS27474 Jam Nut Shell Size V Thread UNEF-2A Mod (Plated) Size Major Dia. Mod A Dia. F Q Dia. S 8 .4375-28 .421- .417 .473 (12.03) .438 (11.14) 1.375 (34.97) 1.250 (31.79) 10 .5625-24 .542- .538 .590 (15.00) .438 (11.14) 1.500 (38.15) 1.375 (34.97) 12 .6875-24 .667- .663 .750 (19.07) .438 (11.14) 1.625 (41.35) 1.500 (38.15) 14 .8125-20 .791- .787 .875 (22.25) .438 (11.14) 1.750 (44.50) 1.625 (41.35) 16 .9375-20 .916- .912 1.000 (25.43) .438 (11.14) 1.938 (49.28) 1.781 (45.29) 18 1.0625-18 1.034-1.030 1.125 (28.61) .438 (11.14) 2.016 (51.27) 1.890 (48.06) 20 1.1875-18 1.158-1.154 1.250 (31.79) .464 (11.80) 2.141 (54.45) 2.016 (51.27) 22 1.3125-18 1.283-1.279 1.375 (34.97) .464 (11.80) 2.265 (57.60) 2.140 (54.42) 24 1.4375-18 1.408-1.404 1.500 (38.15) .464 (11.80) 2.390 (60.78) 2.265 (57.60) See page 200 for Termination Detail Dimensions in inches (mm) 210 SPECTRUM CONTROL INC. * 8031 Avonia Rd. * Fairview, PA 16415 * Phone: 814-474-2207 * Fax: 814-474-2208 * Web site: www.spectrumcontrol.com SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 *1566 PRINTER 171-241 v2 12/4/06 9:42 AM Page 39 MIL-C-38999, Compact Shell Series III D38999/20 Wall Mount Shell Size V Thread F R T S P Q W 9 M12 x 1.0-6g-0.100R .823 (20.93) .719 (18.28) .594 (15.11) .937 (23.83) .128 (3.25) .216 (5.49) .098 (2.49) 11 M15 x 1.0-6g-0.100R .823 (20.93) .812 (20.15) .719 (18.28) 1.031 (26.22) .128 (3.25) .194 (4.93) .098 (2.49) 13 M18 x 1.0-6g-0.100R .823 (20.93) .906 (23.04) .812 (20.65) 1.126 (28.63) .128 (3.25) .194 (4.93) .098 (2.49) 15 M22 x 1.0-6g-0.100R .823 (20.93) .969 (24.64) .906 (23.04) 1.220 (31.02) .128 (3.25) .173 (4.40) .098 (2.49) 17 M25 x 1.0-6g-0.100R .823 (20.93) 1.062 (27.01) .969 (24.64) 1.311 (33.34) .128 (3.25) .194 (4.93) .098 (2.49) 19 M28 x 1.0-6g-0.100R .823 (20.93) 1.156 (29.40) 1.062 (27.01) 1.437 (36.54) .128 (3.25) .194 (4.93) .098 (2.49) 21 M31 x 1.0-6g-0.100R .791 (20.12) 1.250 (31.79) 1.156 (29.40) 1.563 (39.75) .128 (3.25) .194 (4.93) .126 (3.20) 23 M34 x 1.0-6g-0.100R .791 (20.12) 1.375 (34.97) 1.250 (31.79) 1.689 (42.95) .154 (3.92) .242 (6.15) .126 (3.20) 25 M37 x 1.0-6g-0.100R .791 (20.12) 1.500 (38.15) 1.375 (34.97) 1.811 (46.05) .154 (3.92) .242 (6.15) .126 (3.20) See page 200 for Termination Detail Shell Size V Thread F Dia. S Q W 9 M12 X 1.0-6g-0.100R 1.189 (30.24) 1.063 (27.03) .651 (16.55) .087 (2.21) 11 M15 X 1.0-6g-0.100R 1.375 (34.97) 1.252 (31.84) .751 (19.10) .087 (2.21) 13 M18 X 1.0-6g-0.100R 1.500 (38.15) 1.374 (34.94) .938 (23.85) .087 (2.21) 15 M22 X 1.0-6g-0.100R 1.626 (41.35) 1.500 (38.15) 1.062 (27.01) .087 (2.21) 17 M25 X 1.0-6g-0.100R 1.752 (44.55) 1.626 (41.35) 1.187 (30.19) .087 (2.21) 19 M28 X 1.0-6g-0.100R 1.937 (49.26) 1.811 (46.05) 1.312 (33.36) .118 (3.00) 21 M31 X 1.0-6g-0.100R 2.063 (52.46) 1.937 (49.26) 1.437 (36.54) .118 (3.00) 23 M34 X 1.0-6g-0.100R 2.189 (55.67) 2.063 (52.46) 1.562 (39.72) .118 (3.00) 25 M37 X 1.0-6g-0.100R 2.311 (58.77) 2.189 (55.67) 1.687 (42.90) .118 (3.00) See page 200 for Termination Detail Dimensions in inches (mm) SPECTRUM CONTROL INC. * 8031 Avonia Rd. * Fairview, PA 16415 * Phone: 814-474-2207 * Fax: 814-474-2208 * Web site: www.spectrumcontrol.com SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 Filtered Connectors D38999/24 Jam Nut 211 *1566 PRINTER 171-241 v2 12/4/06 9:42 AM Page 40 Extended Shell Filtered Connectors This extended shell design is used in all MIL series connectors including 38999, 24308, 83723, and 26482. This connector is constructed by adding filters to the rear of a standard connector. The method of filtering can be either planars or tubular capacitors. Extended shell connectors are ideal where quick turnaround is required for prototype devices. The range of filtering within the connector can be expanded due to the availability of either tubular or planar capacitors. In addition, custom schematics (such as double Pi, double L, or T sections) and transient voltage protection devices can be included in the connector. For more information on extended shell connectors, refer to pages 213-229. Unfiltered Connector Shell Filtered Connectors Collar I Retrofit existing connectors - We can add filters to customer supplied connectors, saving time during prototype phase and expediting system evaluation. I Design flexibility and quality assurance - We are vertically integrated with ceramic capacitors, enabling us to offer a broad selection of this critical component and ensuring design versatility and manufacturing control. I Prototypes - Our EMI filtering expertise and large capacitor inventory allow us to quickly provide a working sample of your filtered connector. I Economy and turnaround - Most components we utilize are standards, minimizing our tooling requirements and providing cost savings and a shorter lead time. I MIL and commercial applications - Reduce program costs by utilizing our extended shell connectors for both MIL spec and commercial grade connectors. I Reduce testing and qualification - Use of a QPL'd connector interface can expedite your approval process. In addition, we can filter any series of connectors . . . eliminating concerns over filter connector availability. Potting Filtered Contact Capacitor Ground Plate 212 Spectrums Control Advantages For 38999 compact shell design, see page 205. SPECTRUM CONTROL INC. * 8031 Avonia Rd. * Fairview, PA 16415 * Phone: 814-474-2207 * Fax: 814-474-2208 * Web site: www.spectrumcontrol.com SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 *1566 PRINTER 171-241 v2 12/4/06 9:42 AM Page 41 MIL-C-38999, Extended Shell Ordering Information Available connector styles and shell sizes for this MIL series are shown on the following pages. Refer to these pages and the information below to develop your connector part number. Materials and Finishes Custom Designs Shell. . . . . . . . . . . . . . . . . As noted in Ordering Information Backshell. . . . . . . . . . . . . . . . . . . Copper Alloy, Nickel Plate Contacts . . . . . . . . . . . . . . . . . . Copper alloy, gold plate per . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . MIL-G-45204 (For electrical specifications, see page 204.) Due to the versatility provided with this product design, custom requirements can be readily accommodated. Consult Spectrum Control for your specific needs. F Extended Shell Indicator 8 C A MIL Indicator 8=MIL-C-38999 23 B 35 Shell Size 9, 11, 13, 15, 17, 19, 21, 23 and 25 Series Indicator A=Series I B=Series II C=Series III D=Series IV N Contact Arrangement See below 8, 10, 12, 14, 16, 18, 20, 22 and 24. Series II only Shell Style A - Wall mount (front panel) B - Box mount (front panel) C - Jam nut D - Wall mount (rear panel) E - Box mount (rear panel) F - Hermetic jam nut G - Hermetic wallmount H - Straight plug I - Hermetic box mount P Finish B - Olive drab cadmium D - Stainless steel, fused tin (hermetics only) N - Stainless steel, electrodeposited nickel (hermetics only) E - Stainless steel, passivated 4 102 Filter Schematic "1" = "C" feed-thru "4" = Pi Contact/ Termination Type P - Pin/PC tail S - Pin/solder cup B - Socket/PC tail D - Socket/Solder cup Filter Capacitance Specify by using EIA codes. Two significant digits plus number of zeros. Example: 102 = 1000pF 303 = 30.0nF 104 =. 1F * See table page 204 Alternate Shell Position N, A, B, C, D - All E - Series III only Contact Arrangements (First two digits shell size, second two contact arrangement) 8-98 9-98 A98 3 #20 14-35 15-35 D35 37 #22D 10-98 11-98 B98 7 #20 20-41 21-41 G41 41 #20 12-98 13-98 C98 10 #20 16-35 17-35 E35 55 #22D 10-35 11-35 B35 13 #22D 24-61 25-61 J61 61 #20 14-15 15-15 D15 14 #20 (A-N, R) 1 #16 (P) 18-35 19-35 F35 66 #22D 14-18 15-18 D18 18 #20 20-35 21-35 G35 79 #22D 22-21 23-21 H21 21 #16 22-35 23-35 H35 100 #22D 12-35 13-35 C35 22 #22D Filtered Connectors Note: First set of numbers represents Series II, second Series I, third Series III & IV, and Fourth # of contacts and size. 24-35 25-35 J35 128 #22D Note: For availability of filtered connectors with custom requirements, such as mixed capacitance, insulated lines, ground lines or other contact arrangements, consult factory for specific part number. SPECTRUM CONTROL INC. * 8031 Avonia Rd. * Fairview, PA 16415 * Phone: 814-474-2207 * Fax: 814-474-2208 * Web site: www.spectrumcontrol.com SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 213 *1566 PRINTER 171-241 v2 12/4/06 9:42 AM Page 42 MIL-C-38999, Extended Shell Series I MS27468 Jam Nut Receptacle Shell Size A B C D E F G L 9 1.199 (30.45) .697 (17.70) .875 (22.23) 1.062 (26.97) .669 (16.99) .572 (14.53) .515 (13.08) 1.715 (43.56) 11 1.386 (35.20) .822 (20.88) 1.000 (25.40) 1.250 (31.75) .769 (19.53) .700 (17.78) .640 (16.26) 1.715 (43.56) 13 1.511 (38.38) 1.007 (25.58) 1.188 (30.18) 1.375 (34.93) .955 (24.26) .850 (21.59) .765 (19.43) 1.715 (43.56) 15 1.636 (41.55) 1.134 (28.80) 1.312 (33.32) 1.500 (38.10) 1.084 (27.53) .975 (24.77) .890 (22.61) 1.715 (43.56) 17 1.761 (44.73) 1.259 (31.98) 1.438 (36.53) 1.625 (41.28) 1.208 (30.68) 1.100 (27.94) 1.015 (25.78) 1.715 (43.56) 19 1.949 (49.50) 1.384 (35.15) 1.562 (39.67) 1.812 (46.02) 1.333 (33.86) 1.207 (30.66) 1.140 (28.96) 1.715 (43.56) 21 2.073 (52.65) 1.507 (38.28) 1.688 (42.88) 1.938 (49.23) 1.459 (37.06) 1.332 (33.83) 1.265 (32.13) 1.745 (44.32) 23 2.199 (55.85) 1.634 (41.50) 1.812 (46.02) 2.062 (52.37) 1.575 (40.01) 1.457 (37.01) 1.390 (35.31) 1.745 (44.32) 25 2.323 (59.00) 1.759 (44.68) 2.000 (50.80) 2.188 (55.58) 1.709 (43.41) 1.582 (40.18) 1.515 (38.48) 1.745 (44.32) MS27470 Hermetic Seal Jam Nut Receptacle Filtered Connectors Shell Size A B C D E F G L 9 1.199 (30.45) .697 (17.70) .875 (22.23) 1.062 (26.97) .669 (16.99) .572 (14.53) .730 (18.54) 1.860 (47.24) 11 1.386 (35.20) .822 (20.88) 1.000 (25.40) 1.250 (31.75) .769 (19.53) .700 (17.78) .855 (21.72) 1.860 (47.24) 13 1.511 (38.38) 1.007 (25.58) 1.188 (30.18) 1.375 (34.93) .955 (24.26) .850 (21.59) .980 (24.89) 1.860 (47.24) 15 1.636 (41.55) 1.134 (28.80) 1.312 (33.32) 1.500 (38.10) 1.084 (27.53) .975 (24.77) 1.105 (28.07) 1.860 (47.24) 17 1.761 (44.73) 1.259 (31.98) 1.438 (36.53) 1.625 (41.28) 1.208 (30.68) 1.100 (27.94) 1.230 (31.24) 1.860 (47.24) 19 1.949 (49.50) 1.384 (35.15) 1.562 (39.67) 1.812 (46.02) 1.333 (33.86) 1.207 (30.66) 1.355 (34.42) 1.885 (47.88) 21 2.073 (52.65) 1.507 (38.28) 1.688 (42.88) 1.938 (49.23) 1.459 (37.06) 1.332 (33.83) 1.405 (35.69) 1.885 (47.88) 23 2.199 (55.85) 1.634 (41.50) 1.812 (46.02) 2.062 (52.37) 1.575 (40.01) 1.457 (37.01) 1.605 (40.77) 1.885 (47.88) 25 2.323 (59.00) 1.759 (44.68) 2.000 (50.80) 2.188 (55.58) 1.709 (43.41) 1.582 (40.18) 1.730 (43.94) 1.885 (47.88) MS27469 Hermetic Seal Wall Mount Receptacle Shell Size A B C D E 9 .938 (23.83) .719 (18.26) .128 (3.25) .572 (14.53) .765 (19.43) 11 1.031 (26.19) .812 (20.62) .128 (3.25) .700 (17.78) .890 (22.61) 13 1.125 (28.58) .906 (23.01) .128 (3.25) .850 (21.59) 1.015 (25.78) 15 1.219 (30.96) .969 (24.61) .128 (3.25) .975 (24.77) 1.140 (28.96) 17 1.312 (33.32) 1.062 (26.97) .128 (3.25) 1.100 (27.94) 1.265 (28.96) 19 1.438 (36.53) 1.156 (29.36) .128 (3.25) 1.207 (30.66) 1.390 (35.31) 21 1.562 (39.67) 1.250 (31.75) .128 (3.25) 1.332 (33.83) 1.515 (38.48) 23 1.688 (42.88) 1.375 (34.93) .147 (3.73) 1.457 (37.01) 1.640 (41.66) 25 1.812 (46.02) 1.500 (38.10) .147 (3.73) 1.582 (40.18) 1.765 (44.83) Dimensions in inches (mm) 214 SPECTRUM CONTROL INC. * 8031 Avonia Rd. * Fairview, PA 16415 * Phone: 814-474-2207 * Fax: 814-474-2208 * Web site: www.spectrumcontrol.com SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 *1566 PRINTER 171-241 v2 12/4/06 9:42 AM Page 43 MIL-C-38999, Extended Shell Series I MS27496 Box Mount Receptacle, Front Panel Mounting Shell Size A B C D E 9 .938 (23.83) .719 (18.26) .572 (14.53) .632 (16.05) .495 (12.57) 11 1.031 (26.19) .812 (20.62) .700 (17.78) .632 (16.05) .620 (15.75) 13 1.125 (28.58) .906 (23.01) .850 (21.59) .632 (16.05) .745 (18.92) 15 1.219 (30.96) .969 (24.61) .975 (24.77) .632 (16.05) .870 (22.10) 17 1.312 (33.32) 1.062 (27.10) 1.100 (27.94) .632 (16.05) .995 (25.27) 19 1.438 (36.53) 1.156 (29.36) 1.207 (30.66) .632 (16.05) 1.115 (28.32) 21 1.562 (39.67) 1.250 (31.75) 1.332 (33.83) .602 (15.29) 1.235 (31.37) 23 1.688 (42.88) 1.375 (34.93) 1.457 (37.05) .602 (15.29) 1.360 (34.54) 25 1.812 (46.02) 1.500 (38.10) 1.582 (40.18) .602 (15.29) 1.485 (37.72) Shell Size A B C D E 9 .938 (23.83) .719 (18.26) .572 (14.53) .820 (20.83) .495 (12.57) 11 1.031 (26.19) .812 (20.62) .700 (17.78) .820 (20.83) .620 (15.75) 13 1.125 (28.58) .906 (23.01) .850 (21.59) .820 (20.83) .745 (18.92) 15 1.219 (30.96) .969 (24.61) .975 (24.77) .820 (20.83) .870 (22.10) 17 1.312 (33.32) 1.062 (27.10) 1.100 (27.94) .820 (20.83) .995 (25.27) 19 1.438 (36.53) 1.156 (29.36) 1.207 (30.66) .820 (20.83) 1.115 (28.32) 21 1.562 (39.67) 1.250 (31.75) 1.332 (33.83) .790 (20.07) 1.235 (31.37) 23 1.688 (42.88) 1.375 (34.93) 1.457 (37.01) .790 (20.07) 1.360 (34.54) 25 1.812 (46.02) 1.500 (38.10) 1.582 (40.18) .790 (20.07) 1.485 (37.72) Filtered Connectors MS27505 Box Mount Receptacle, Back Panel Mounting MS27467 Straight Plug Shell Size A B V 9 .844 (21.44) .540 (13.72) .4375-28 UNEF-2A 11 .969 (24.61) .660 (16.76) .5625-24 UNEF-2A 13 1.141 (28.98) .785 (19.94) .6875-24 UNEF-2A 15 1.266 (32.16) .915 (23.24) .8125-20 UNEF-2A 17 1.391 (35.33) 1.025 (26.04) .9375-20 UNEF-2A 19 1.500 (38.10) 1.145 (29.08) 1.0625-18 UNEF-2A 21 1.625 (41.28) 1.270 (32.26) 1.1875-18 UNEF-2A 23 1.750 (44.45) 1.395 (35.43) 1.3125-18 UNEF-2A 25 1.875 (47.63) 1.520 (38.61) 1.4375-18 UNEF-2A Dimensions in inches (mm) SPECTRUM CONTROL INC. * 8031 Avonia Rd. * Fairview, PA 16415 * Phone: 814-474-2207 * Fax: 814-474-2208 * Web site: www.spectrumcontrol.com SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 215 *1566 PRINTER 171-241 v2 12/4/06 9:42 AM Page 44 MIL-C-38999, Extended Shell Series II MS27477 Hermetic Jam Nut Receptacle Shell Size A B C D E F G H 8 .830 (21.08) 1.390 (35.31) 1.250 (31.75) 1.062 (26.97) .884 (22.45) .438 (11.13) .473 (12.01) .435 (11.05) 10 .955 (24.26) 1.515 (38.48) 1.375 (34.93) 1.188 (30.18) 1.007 (25.58) .438 (11.13) .590 (14.99) .525 (13.34) 12 1.084 (27.53) 1.640 (41.66) 1.500 (38.10) 1.312 (33.32) 1.134 (28.80) .438 (11.13) .750 (19.05) .665 (16.89) 14 1.208 (30.68) 1.765 (44.83) 1.625 (41.28) 1.438 (36.53) 1.259 (31.98) .438 (11.13) .875 (22.23) .785 (19.94) 16 1.333 (33.86) 1.953 (49.61) 1.781 (45.24) 1.562 (39.67) 1.384 (35.15) .438 (11.13) 1.000 (25.40) .915 (23.24) 18 1.459 (37.06) 2.031 (51.59) 1.890 (48.01) 1.688 (42.88) 1.507 (38.28) .438 (11.13) 1.125 (28.50) .985 (25.02) 20 1.576 (40.03) 2.156 (54.76) 2.016 (51.21) 1.812 (46.02) 1.634 (41.50) .464 (11.79) 1.250 (31.75) 1.135 (28.83) 22 1.701 (43.21) 2.280 (57.91) 2.140 (54.31) 2.000 (50.80) 1.759 (44.68) .464 (11.79) 1.375 (34.93) 1.255 (31.88) 24 1.826 (46.38) 2.405 (61.09) 2.265 (57.53) 2.125 (53.98) 1.884 (47.85) .464 (11.79) 1.500 (38.10) 1.385 (35.18) MS27474 Jam Nut Receptacle Filtered Connectors Shell Size C D E F G H L 8 .830 1.390 (21.08) (35.31) A B 1.250 (31.75) 1.062 (26.97) .884 (22.45) .438 (11.13) .473 (12.01) .515 (13.08) 1.370 (34.80) 10 .955 1.515 (24.26) (38.48) 1.375 (34.93) 1.188 (30.18) 1.007 (25.58) .438 (11.13) .590 (14.99) .640 (16.26) 1.370 (34.80) 12 1.084 1.640 (27.53) (41.66) 1.500 (38.10) 1.312 (33.32) 1.134 (28.80) .438 (11.13) .750 (19.05) .765 (19.43) 1.370 (34.80) 14 1.208 1.765 (30.68) (44.83) 1.625 (41.28) 1.438 (36.53) 1.259 (31.98) .438 (11.13) .875 (22.23) .890 (22.61) 1.370 (34.80) 16 1.333 1.953 (33.86) (49.61) 1.781 (45.24) 1.562 (39.67) 1.384 (35.15) .438 (11.13) 1.000 (25.40) 1.015 (25.78) 1.370 (34.80) 18 1.459 2.031 (37.06) (51.59) 1.890 (48.01) 1.688 (42.88) 1.507 (38.28) .438 (11.13) 1.125 (28.58) 1.140 (28.96) 1.370 (34.80) 20 1.576 2.156 (40.03) (54.76) 2.016 (51.21) 1.812 (46.02) 1.634 (41.50) .464 (11.79) 1.250 (31.75) 1.265 (32.13) 1.395 (35.43) 22 1.701 2.280 (43.21) (57.91) 2.140 (54.36) 2.000 (50.80) 1.759 (44.68) .464 (11.79) 1.375 (34.93) 1.390 (35.31) 1.395 (35.43) 24 1.826 2.405 (46.38) (61.09) 2.265 (57.53) 2.125 (53.98) 1.884 (47.85) .464 (11.79) 1.500 (38.10) 1.515 (38.48) 1.395 (35.43) MS27484 Straight Plug Shell Size V Thread Modified Class 2-A Modified Major Dia. .540 (13.72) .4375-28 UNEF .421-.417 .844 (21.44) .660 (16.76) .5625-24 UNEF .542-.538 12 1.016 (25.81) .785 (19.94) .6875-24 UNEF .667-.663 14 1.141 (28.98) .915 (23.24) .8125-20 UNEF .791-.787 16 1.265 (32.13) 1.025 (26.04) .9375-20 UNEF .916-.912 18 1.391 (35.33) 1.145 (29.08) 1.0625-18 UNEF 1.034-1.030 20 1.500 (38.10) 1.270 (32.26) 1.875-18 UNEF 1.158-1.154 22 1.625 (41.28) 1.395 (35.43) 1.3125-18 UNEF 1.283-1.279 24 1.750 (44.45) 1.520 (38.61) 1.4375-18 UNEF 1.408-1.404 A B 8 .734 (18.64) 10 Dimensions in inches (mm) 216 SPECTRUM CONTROL INC. * 8031 Avonia Rd. * Fairview, PA 16415 * Phone: 814-474-2207 * Fax: 814-474-2208 * Web site: www.spectrumcontrol.com SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 *1566 PRINTER 171-241 v2 12/4/06 9:42 AM Page 45 MIL-C-38999, Extended Shell Series II MS27508 Box Mount Receptacle, Back Panel Mounting Shell Size A B C D 8 .812 (20.62) .594 (15.09) .473 (12.01) .495 (12.57) 10 .938 (23.83) .719 (18.26) .590 (14.99) .620 (15.75) 12 1.031 (26.19) .812 (20.62) .750 (19.05) .745 (18.92) 14 1.125 (28.58) .906 (23.01) .875 (22.23) .870 (22.10) 16 1.219 (30.96) .969 (24.61) 1.000 (25.40) .995 (25.27) 18 1.312 (33.32) 1.062 (27.10) 1.125 (28.58) 1.115 (28.32) 20 1.438 (36.53) 1.156 (29.36) 1.250 (31.75) 1.235 (31.37) 22 1.562 (39.67) 1.250 (31.75) 1.375 (34.93) 1.360 (34.54) 24 1.688 (42.88) 1.375 (34.93) 1.500 (38.10) 1.485 (37.72) Shell Size A B C D 10 .938 (23.83) .719 (18.26) .590 (14.99) .750 (19.05) 12 1.031 (26.19) .812 (20.62) .750 (19.05) .860 (21.84) 14 1.125 (28.58) .906 (23.01) .875 (22.23) .985 (25.02) 16 1.219 (30.96) .969 (24.61) 1.000 (25.40) 1.110 (28.19) 18 1.312 (33.32) 1.062 (26.97) 1.125 (28.58) 1.235 (31.37) 20 1.438 (36.53) 1.156 (29.36) 1.250 (31.75) 1.330 (33.78) 22 1.562 (39.67) 1.250 (31.75) 1.375 (34.93) 1.455 (36.96) 24 1.688 (42.88) 1.375 (34.93) 1.500 (38.10) 1.580 (40.13) Filtered Connectors MS27476 Hermetic Seal, Box Mount Receptacle MS27499 Box Mount Receptacle, Front Panel Mounting Shell Size A B C D 8 .812 (20.62) .594 (15.09) .473 (12.01) .495 (12.57) 10 .938 (23.83) .719 (18.26) .590 (14.99) .620 (15.75) 12 1.031 (26.19) .812 (20.62) .750 (19.05) .745 (18.92) 14 1.125 (28.58) .906 (23.01) .875 (22.23) .870 (22.10) 16 1.219 (30.96) .969 (24.61) 1.000 (25.40) .995 (25.27) 18 1.312 (33.32) 1.062 (26.97) 1.125 (28.58) 1.115 (28.32) 20 1.438 (36.53) 1.156 (29.36) 1.250 (31.75) 1.235 (31.37) 22 1.562 (39.67) 1.250 (31.75) 1.375 (34.93) 1.360 (34.54) 24 1.688 (42.88) 1.375 (34.93) 1.500 (38.10) 1.485 (37.72) Dimensions in inches (mm) SPECTRUM CONTROL INC. * 8031 Avonia Rd. * Fairview, PA 16415 * Phone: 814-474-2207 * Fax: 814-474-2208 * Web site: www.spectrumcontrol.com SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 217 *1566 PRINTER 171-241 v2 12/4/06 9:42 AM Page 46 MIL-C-38999, Extended Shell Series III D38999/20 Wall Mount Receptacle Shell Size MS Shell Size Code A B BB C CC D E 9 A .938 (23.83) .719 (18.26) .594 (15.09) .128 (3.25) .216 (5.49) .820 (20.83) .550 (13.97) 11 B 1.031 (26.19) .812 (20.62) .719 (18.26) .128 (3.25) .194 (4.93) .820 (20.83) .670 (17.02) 13 C 1.125 (28.58) .906 (23.01) .812 (20.62) .128 (3.25) .194 (4.93) .820 (20.83) .785 (19.94) 15 D 1.219 (30.96) .969 (24.61) .906 (23.01) .128 (3.25) .173 (4.39) .820 (20.83) .945 (24.00) 17 E 1.312 (33.32) 1.062 (26.97) .969 (24.61) .128 (3.25) .194 (4.93) .820 (20.83) 1.060 (26.92) 19 F 1.438 (36.53) 1.156 (29.36) 1.062 (26.97) .128 (3.25) .194 (4.93) .820 (20.83) 1.180 (29.97) 21 G 1.562 (39.67) 1.250 (31.75) 1.156 (29.36) .128 (3.25) .194 (4.93) .790 (20.07) 1.295 (32.89) 23 H 1.688 (42.88) 1.375 (34.93) 1.250 (31.75) .154 (3.91) .242 (6.15) .790 (20.07) 1.415 (35.94) 25 J 1.812 (46.02) 1.500 (38.10) 1.375 (34.93) .154 (3.91) .242 (6.15) .790 (20.07) 1.535 (38.99) Filtered Connectors D38999/21 Hermetic Seal Box Mount Receptacle 218 Shell Size MS Shell Size Code A B BB C CC D E 9 A .937 (23.80) .719 (18.26) .594 (15.09) .128 (3.25) .216 (5.49) .843 (21.41) .380 (9.65) 11 B 1.031 (26.20) .812 (20.62) .719 (18.26) .128 (3.25) .194 (4.93) .843 (21.41) .500 (12.70) 13 C 1.126 (28.60) .906 (23.01) .812 (20.62) .128 (3.25) .194 (4.93) .843 (21.41) .620 (15.75) 15 D 1.220 (31.00) .969 (24.61) .906 (23.01) .128 (3.25) .194 (4.93) .843 (21.41) .775 (19.68) 17 E 1.311 (33.30) 1.062 (26.97) .969 (24.61) .128 (3.25) .194 (4.93) .843 (21.41) .895 (22.73) 19 F 1.437 (36.50) 1.156 (29.36) 1.062 (26.97) .128 (3.25) .194 (4.93) .843 (21.41) 1.010 (25.65) 21 G 1.563 (39.70) 1.250 (31.75) 1.156 (29.36) .128 (3.25) .194 (4.93) .843 (21.41) 1.130 (28.70) 23 H 1.689 (42.90) 1.375 (34.93) 1.250 (31.75) .154 (3.91) .242 (6.15) .843 (21.41) 1.250 (31.75) 25 J 1.811 (46.00) 1.500 (38.10) 1.375 (34.93) .154 (3.91) .242 (6.15) .843 (21.41) 1.365 (34.67) Dimensions in inches (mm) SPECTRUM CONTROL INC. * 8031 Avonia Rd. * Fairview, PA 16415 * Phone: 814-474-2207 * Fax: 814-474-2208 * Web site: www.spectrumcontrol.com SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 *1566 PRINTER 171-241 v2 12/4/06 9:42 AM Page 47 MIL-C-38999, Extended Shell Series III D38999/24 Jam Nut Receptacle Shell Size MS Shell Size Code A B C D E F .697 (17.70) .875 (22.23) 1.062 (26.97) .871 (22.12) .669 (16.99) .550 1.595 (13.97) (40.51) G L 9 A 1.199 (30.45) 11 B 1.386 (35.20) .822 (20.88) 1.000 (25.40) 1.250 (31.75) .871 (22.12) .769 (19.53) .670 1.595 (17.02) (40.51) 13 C 1.511 (38.38) 1.007 (25.58) 1.188 (30.18) 1.375 (34.93) .878 (22.30) .955 (24.26) .785 1.595 (19.94) (40.51) 15 D 1.636 (41.55) 1.134 (28.80) 1.312 (33.32) 1.500 (38.10) .878 (22.30) 1.084 (27.53) .945 1.595 (24.00) (40.51) 17 E 1.761 (44.73) 1.259 (31.98) 1.438 (36.53) 1.625 (41.28) .878 (22.30) 1.208 (30.68) 1.060 1.595 (26.92) (40.51) 19 F 1.949 (49.50) 1.384 (35.15) 1.562 (39.67) 1.812 (46.02) .878 (22.30) 1.333 (33.86) 1.180 1.630 (29.97) (41.40) 21 G 2.073 (52.65) 1.507 (38.28) 1.688 (42.88) 1.938 (49.23) .878 (22.30) 1.459 (37.06) 1.295 1.630 (32.89) (41.40) 23 H 2.199 (55.85) 1.634 (41.50) 1.812 (46.02) 2.062 (52.37) .878 (22.30) 1.575 (40.01) 1.415 1.630 (35.94) (41.40) 25 J 2.323 (59.00) 1.759 (44.68) 2.000 (50.80) 2.188 (55.58) .878 (22.30) 1.709 (43.41) 1.535 1.630 (38.99) (41.40) D38999/23 Hermetic Seal Jam Nut Receptacle MS Shell Size Code A B C D E F .697 (17.70) .875 (22.23) 1.062 (26.97) .871 (22.12) .669 (16.99) .730 1.955 (18.54) (49.66) G L 9 A 1.199 (30.45) 11 B 1.386 (35.20) .822 (20.88) 1.000 (25.40) 1.250 (31.75) .871 (22.12) .769 (19.53) .845 1.955 (21.46) (49.66) 13 C 1.511 (38.38) 1.007 (25.58) 1.188 (30.18) 1.375 (34.93) .878 (22.30) .955 (24.26) .970 1.955 (24.64) (49.66) 15 D 1.636 (41.55) 1.134 (28.80) 1.312 (33.32) 1.500 (38.10) .878 (22.30) 1.084 (27.53) 1.095 1.955 (27.81) (49.66) 17 E 1.761 (44.73) 1.259 (31.98) 1.438 (36.53) 1.625 (41.28) .878 (22.30) 1.208 (30.68) 1.220 1.955 (30.99) (49.66) 19 F 1.949 (49.50) 1.384 (35.15) 1.562 (39.67) 1.812 (46.02) .878 (22.30) 1.333 (33.86) 1.345 1.985 (34.16) (50.42) 21 G 2.073 (52.65) 1.507 (38.28) 1.688 (42.88) 1.938 (49.23) .878 (22.30) 1.459 (37.06) 1.470 1.985 (37.34) (50.42) 23 H 2.199 (55.85) 1.634 (41.50) 1.812 (46.02) 2.062 (52.37) .878 (22.30) 1.575 (40.01) 1.595 1.985 (40.51) (50.42) 25 J 2.323 (59.00) 1.759 (44.68) 2.000 (50.80) 2.188 (55.58) .878 (22.30) 1.709 (43.41) 1.720 1.985 (43.69) (50.42) Filtered Connectors Shell Size D38999/26 Straight Plug Shell Size MS Shell Size Code A B V Thread 9 A .859 (21.82) .580 (14.73) M12 X1.0-6g-0.1R 11 B .969 (24.61) .695 (17.65) M15X1.0-6g-0.1R 13 C 1.141 (28.98) .810 (20.57) M18X1.0-6g-0.1R 15 D 1.266 (32.16) .965 (24.51) M22X1.0-6g-0.1R 17 E 1.391 (35.33) 1.080 (27.43) M25X1.0-6g-0.1R 19 F 1.500 (38.10) 1.195 (30.35) M28X1.0-6g-0.1R 21 G 1.625 (41.28) 1.310 (33.27) M31X1.0-6g-0.1R 23 H 1.750 (44.45) 1.425 (36.20) M34X1.0-6g-0.1R J 1.875 (47.63) 1.540 (39.12) M37X1.0-6g-0.1R 25 Dimensions in inches (mm) SPECTRUM CONTROL INC. * 8031 Avonia Rd. * Fairview, PA 16415 * Phone: 814-474-2207 * Fax: 814-474-2208 * Web site: www.spectrumcontrol.com SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 219 *1566 PRINTER 171-241 v2 12/4/06 9:42 AM Page 48 MIL-C-38999, Extended Shell Series IV D38999/40 Wall Mount Receptacle Shell Size MS Size Size Code A B C D E F L .406 (10.31) .509 (12.93) .793 (20.14) .102 (2.59) .670 (17.02) 1.785 (45.34) 11 B 1.051 (26.70) 13 C 1.145 (29.08) .453 (11.51) .634 (16.10) .919 (23.34) .102 (2.59) .785 (19.94) 1.785 (45.34) 15 D 1.240 (31.50) .4845 (12.31) .759 (19.28) 1.044 (26.52) .102 (2.59) .945 (24.00) 1.785 (45.34) 17 E 1.334 (33.88) .531 (13.49) .885 (22.48) 1.170 (29.72) .102 (2.59) 1.060 (26.92) 1.785 (45.34) 19 F 1.480 (37.06) .578 (14.68) 1.009 (25.63) 1.294 (32.87) .102 (2.59) 1.180 (29.97) 1.785 (45.34) 21 G 1.582 (40.18) .625 (15.88) 1.134 (28.80) 1.419 (36.04) .133 (3.38) 1.295 (32.89) 1.815 (46.10) 23 H 1.708 (43.38) .6875 (17.46) 1.259 (31.98) 1.544 (39.22) .133 (3.38) 1.415 (35.94) 1.815 (46.10) 25 J 1.834 (46.58) .750 (19.05) 1.384 (35.15) 1.669 (42.39) .133 (3.38) 1.535 (38.99) 1.815 (46.10) D38999/41 Hermetic Seal Box Mount Receptacle Filtered Connectors Shell Size 220 MS Size Size Code A B C D E L .406 (10.31) .093 (2.36) .509 (12.93) .500 (12.70) 1.785 (45.34) 11 B 1.051 (26.70) 13 C 1.145 (29.08) .453 (11.51) .093 (2.36) .634 (16.10) .620 (15.75) 1.785 (45.34) 15 D 1.240 (31.50) .4845 (12.31) .093 (2.36) .759 (19.28) .775 (19.68) 1.785 (45.34) 17 E 1.334 (33.88) .531 (13.49) .093 (2.36) .885 (22.48) .895 (22.73) 1.785 (45.34) 19 F 1.480 (37.06) .578 (14.68) .093 (2.36) 1.009 (25.68) 1.010 (25.65) 1.785 (45.34) 21 G 1.582 (40.18) .625 (15.88) .093 (2.36) 1.134 (28.80) 1.130 (28.70) 1.815 (46.10) 23 H 1.708 (43.38) .6875 (17.46) .093 (2.36) 1.259 (31.90) 1.250 (31.75) 1.815 (46.10) 25 J 1.834 (46.58) .750 (19.05) .093 (2.36) 1.384 (35.15) 1.365 (34.67) 1.815 (46.10) Dimensions in inches (mm) SPECTRUM CONTROL INC. * 8031 Avonia Rd. * Fairview, PA 16415 * Phone: 814-474-2207 * Fax: 814-474-2208 * Web site: www.spectrumcontrol.com SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 *1566 PRINTER 171-241 v2 12/4/06 9:42 AM Page 49 MIL-C-38999, Extended Shell Series IV D38999/42 Box Mount Receptacle Shell Size Shell Size Size Code A B C D E L .406 (10.31) .102 (2.59) .509 (12.93) .655 (16.64) 1.785 (45.34) 11 B 1.051 (26.70) 13 C 1.145 (29.08) .453 (11.51) .102 (2.59) .634 (16.10) .770 (19.56) 1.785 (45.34) 15 D 1.240 (31.50) .4845 (12.31) .102 (2.59) .759 (19.28) .895 (22.73) 1.785 (45.34) 17 E 1.334 (33.88) .531 (13.49) .102 (2.59) .885 (22.48) 1.020 (25.91) 1.785 (45.34) 19 F 1.460 (37.08) .578 (14.68) .102 (2.59) 1.009 (25.63) 1.130 (28.70) 1.785 (45.34) 21 G 1.582 (40.18) .626 (15.90) .133 (3.38) 1.134 (28.80) 1.250 (31.75) 1.815 (46.10) 23 H 1.708 (43.38) .6875 (17.46) .133 (3.38) 1.259 (31.98) 1.375 (34.93) 1.815 (46.10) 25 J 1.834 (46.58) .750 (19.05) .133 (3.38) 1.384 (35.15) 1.500 (38.10) 1.815 (46.10) Shell Size MS Shell Size Code A B C D 11 B 1.394 (35.41) 1.260 (32.00) .509 (12.93) .670 (17.02) 13 C 1.520 (38.61) 1.417 (36.00) .634 (16.10) .785 (19.94) 15 D 1.642 (41.71) 1.614 (41.00) .759 (19.28) .945 (24.00) 17 E 1.799 (45.69) 1.614 (41.00) .885 (22.48) 1.060 (26.92) 19 F 1.909 (48.49) 1.811 (46.00) 1.009 (25.63) 1.180 (29.97) 21 G 2.035 (51.69) 1.968 (50.00) 1.134 (28.80) 1.295 (32.89) 23 H 2.157 (54.79) 1.968 (50.00) 1.259 (31.98) 1.415 (35.94) 25 J 2.283 (57.99) 2.165 (55.00) 1.384 (35.15) 1.535 (38.99) Filtered Connectors D38999/44 Jam Nut Receptacle D38999/46 Straight Plug Shell Size MS Shell Size Code A B C V .775 (19.69) .695 (17.65) M15x1.0-6g-0.1R 11 B 1.054 (26.77) 13 C 1.226 (31.14) .901 (22.89) .810 (20.57) M18x1.0-6g-0.1R 15 D 1.351 (34.32) 1.039 (26.39) .965 (24.51) M22x1.0-6g-0.1R 17 E 1.476 (37.49) 1.149 (29.18) 1.080 (27.43) M25x1.0-6g-0.1R 19 F 1.586 (40.28) 1.275 (32.39) 1.195 (30.35) M28x1.0-6g-0.1R 21 G 1.711 (43.46) 1.401 (35.59) 1.310 (33.27) M31x1.0-6g-0.1R 23 H 1.836 (46.63) 1.527 (38.79) 1.425 (36.20) M34x1.0-6g-0.1R 25 J 1.964 (49.89) 1.649 (41.88) 1.540 (39.12) M37x1.0-6g-0.1R Dimensions in inches (mm) SPECTRUM CONTROL INC. * 8031 Avonia Rd. * Fairview, PA 16415 * Phone: 814-474-2207 * Fax: 814-474-2208 * Web site: www.spectrumcontrol.com SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 221 *1566 PRINTER 171-241 v2 12/4/06 9:42 AM Page 50 MIL-C-83723, Extended Shell Series III All extended shell connectors are manufactured by adding filters to a standard MIL qualified connector. The filtering is achieved by extending the connector with the use of a backshell and placing either planar or tubular capacitors in the backshell. Spectrum will always keep the extension to a minimum. These miniature circular filtered connectors are designed to meet the applicable portions of MIL-C-83723 and are intermateable with that specification. Spectrums Control Advantages Custom Designs Due to the versatility provided with this product design, custom requirements can be readily accommodated. Consult Spectrum Control for your specific needs. Materials and Finishes Shell. . . . . . . . . . . . . . . . . As noted in Ordering Information Backshell. . . . . . . . . . . . . . . . . . . Copper Alloy, Nickel Plate Contacts . . . . . . . . . . . . . . . . . . Copper alloy, gold plate per . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . MIL-G-45204 (For electrical specifications, see page 204.) Ordering Information Filtered Connectors Available connector styles and shell sizes for this MIL series are shown on the following pages. Refer to these pages and the information below to develop your connector part number. F 37 24 R 61 P N 4 102 Extended Shell Indicator Shell Size 8, 10, 12, 14 16, 18, 20, 22 and 24 Contact/ Termination Type P-Pin/PC tail S-Pin/solder cup B-Socket/PC tail D-Socket/Solder cup Filter Schematic "1" = "C" feed-thru "4" = Pi MIL Series Indicator 37= MIL-C-83723 Series III Finish R - Aluminum shell, conductive finish W - Aluminum, cadmium conductive finish Y - Stainless steel, hermetic seal Alternate Shell Position Filter Capacitance Specify by using EIA codes. Two significant digits plus number of zeros. Example: 102 = 1000pF 401 = 400pF * See table page 204 Shell Style A - Wall mount B - Hermetic box mount C - Jam nut D - Hermetic jam nut E - Straight plug 222 A I Retrofit existing connectors - We can add filters to customer supplied connectors, saving time during prototype phase and expediting system evaluation. I Design flexibility and quality assurance - We are vertically integrated with ceramic capacitors, enabling us to offer a broad selection of this critical component and ensuring design versatility and manufacturing control. I Prototypes - Our EMI filtering expertise and large capacitor inventory allow us to quickly provide a working sample of your filtered connector. I Economy and turnaround - Most components we utilize are standards, minimizing our tooling requirements and providing cost savings and a shorter lead time. I MIL and commercial applications - Reduce program costs by utilizing our extended shell connectors for both MIL spec and commercial grade connectors. I Reduce testing and qualification - Use of a QPL'd connector interface can expedite your approval process. In addition, we can filter any series of connectors . . . eliminating concerns over filter connector availability. Contact Arrangement See next page Shell Size All 10, 12, 14, 16, 18, 20, 22, 24 Polarizing Code N (normal) 18 8, 10 10 5 6, 7, 8, 9 10 (Y) 1, 2, 3, 4 SPECTRUM CONTROL INC. * 8031 Avonia Rd. * Fairview, PA 16415 * Phone: 814-474-2207 * Fax: 814-474-2208 * Web site: www.spectrumcontrol.com SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 *1566 PRINTER 171-241 v2 12/4/06 9:42 AM Page 51 MIL-C-83723, Extended Shell Series III Contact Arrangements (First two digits shell size, second two contact arrangement) 12-4 4 #16 12-12 12 #20 22-23 23 #16 10-2 2 #20 10-20 2 #16 10-5 5 #20 8-3 3 #20 10-6 6 #20 18-14 14 #16 14-15 15 #20 16-24 24 #20 18-31 31 #20 8-98 3 #20 14-7 7 #16 20-16 16 #16 20-41 41 #20 12-3 3 #16 10-16 10 #16 22-19 19 #16 28-41 41 #16 Filtered Connectors 8-2 2 #20 Note: For availability of filtered connectors with custom requirements, such as mixed capacitance, insulated lines, ground lines or other contact arrangements, consult factory for specific part number. 22-55 55 #20 24-61 61 #20 SPECTRUM CONTROL INC. * 8031 Avonia Rd. * Fairview, PA 16415 * Phone: 814-474-2207 * Fax: 814-474-2208 * Web site: www.spectrumcontrol.com SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 223 *1566 PRINTER 171-241 v2 12/4/06 9:42 AM Page 52 MIL-C-83723, Extended Shell Series III M83723/71/72 Bayonet Coupling Wall Mount Receptacle Shell Size A B C D E 8 .812 (20.62) .594 (15.09) .120 (3.05) .562 (14.27) .575 (14.61) 10 .937 (23.80) .719 (18.26) .120 (3.05) .696 (17.68) .700 (17.78) 12 1.031 (26.19) .812 (20.62) .120 (3.05) .875 (22.23) .825 (20.96) 14 1.125 (28.58) .906 (23.01) .120 (3.05) .935 (23.75) .950 (24.13) 16 1.250 (31.75) .969 (24.61) .120 (3.05) 1.062 (26.97) 1.075 (27.31) 18 1.343 (34.11) 1.062 (26.97) .120 (3.05) 1.187 (30.15) 1.140 (28.96) 20 1.473 (37.41) 1.156 (29.36) .120 (3.05) 1.312 (33.32) 1.265 (32.13) 22 1.562 (39.67) 1.250 (31.75) .120 (3.05) 1.437 (36.50) 1.340 (34.04) 24 1.703 (43.26) 1.375 (34.93) .149 (3.78) 1.562 (39.67) 1.515 (38.48) M83723/79 Bayonet Coupling Hermetic Box Receptacle Filtered Connectors Shell Size A B C D E 8 .812 (20.62) .594 (15.09) .120 (3.05) .562 (14.27) .580 (14.73) 10 .937 (23.80) .719 (18.26) .120 (3.05) .696 (17.68) .645 (16.38) 12 1.031 (26.19) .812 (20.62) .120 (3.05) .875 (22.23) .830 (21.08) 14 1.125 (28.58) .906 (23.01) .120 (3.05) .935 (23.75) .895 (22.73) 16 1.250 (31.75) .969 (24.61) .120 (3.05) 1.062 (26.97) 1.020 (25.91) 18 1.343 (34.11) 1.062 (26.97) .120 (3.05) 1.187 (30.15) 1.145 (29.08) 20 1.473 (37.41) 1.156 (29.36) .120 (3.05) 1.312 (33.32) 1.270 (32.26) 22 1.562 (39.67) 1.250 (31.75) .120 (3.05) 1.437 (36.50) 1.395 (35.43) 24 1.703 (43.26) 1.375 (34.93) .149 (3.78) 1.562 (39.67) 1.520 (38.61) Dimensions in inches (mm) 224 SPECTRUM CONTROL INC. * 8031 Avonia Rd. * Fairview, PA 16415 * Phone: 814-474-2207 * Fax: 814-474-2208 * Web site: www.spectrumcontrol.com SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 *1566 PRINTER 171-241 v2 12/4/06 9:42 AM Page 53 MIL-C-83723, Extended Shell Series III M83723/73/74 Bayonet Coupling Jam Nut Receptacle Shell Size A B C L 8 .979 (24.87) 1.068 (27.13) .575 (14.61) 1.830 (46.48) 10 1.104 (28.04) 1.192 (30.28) .700 (17.78) 1.830 (46.48) 12 1.291 (32.79) 1.380 (35.05) .825 (20.96) 1.830 (46.48) 14 1.391 (35.33) 1.505 (38.23) .950 (24.13) 1.830 (46.48) 16 1.516 (38.51) 1.630 (41.40) 1.075 (27.31) 1.830 (46.48) 18 1.641 (41.68) 1.756 (44.60) 1.140 (28.96) 1.830 (46.48) 20 1.766 (44.86) 1.860 (47.24) 1.265 (32.13) 1.830 (46.48) 22 1.954 (49.63) 2.068 (52.53) 1.340 (34.04) 1.860 (47.24) 24 2.079 (52.81) 2.160 (54.86) 1.515 (38.48) 1.860 (47.24) Shell Size A B C L 8 .979 (24.87) 1.068 (27.13) .490 (12.45) 1.670 (42.42) 10 1.104 (28.04) 1.192 (30.28) .550 (13.97) 1.670 (42.42) 12 1.291 (32.79) 1.380 (35.05) .740 (18.80) 1.670 (42.42) 14 1.391 (35.33) 1.505 (38.23) .800 (20.32) 1.670 (42.42) 16 1.516 (38.51) 1.630 (41.40) .925 (23.50) 1.670 (42.42) 18 1.641 (41.68) 1.756 (47.24) 1.050 (26.67) 1.670 (42.42) 20 1.766 (44.86) 1.860 (47.24) 1.240 (31.50) 1.670 (42.42) 22 1.954 (49.63) 2.068 (52.53) 1.300 (33.02) 1.670 (42.42) 24 2.079 (52.81) 2.160 (54.86) 1.490 (37.85) 1.670 (42.42) Filtered Connectors M83723/81 Bayonet Coupling Hermetic Jam Nut Receptacle M83723/77/78 Bayonet Coupling Straight Plug Shell Size A B V 8 .766 (19.46) .590 (14.99) 1/2-20 UNEF-2A 10 .906 (23.01) .720 (18.29) 5/8-24 UNEF-2A 12 1.078 (27.38) .840 (21.34) 3/4-20 UNEF-2A 14 1.141 (28.98) .965 (24.51) 7/8-20 UNEF-2A 16 1.266 (32.16) 1.090 (27.69) 1-20 UNEF-2A 18 1.375 (34.93) 1.14 (29.08) 1 1/16-18 UNEF-2A 20 1.510 (38.35) 1.270 (32.26) 1 3/16-18 UNEF-2A 22 1.625 (41.28) 1.395 (35.43) 1 5/16-18 UNEF-2A 24 1.760 (44.70) 1.520 (38.61) 1 7/16-18 UNEF-2A Dimensions in inches (mm) SPECTRUM CONTROL INC. * 8031 Avonia Rd. * Fairview, PA 16415 * Phone: 814-474-2207 * Fax: 814-474-2208 * Web site: www.spectrumcontrol.com SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 225 *1566 PRINTER 171-241 v2 12/4/06 9:42 AM Page 54 MIL-C-26482, Extended Shell All extended shell connectors are manufactured by adding filters to a standard MIL qualified connector. The filtering is achieved by extending the connector with the use of a backshell and placing either planar or tubular capacitors in the backshell. Spectrum will always keep the extension to a minimum. These miniature circular filtered connectors are designed to meet the applicable portions of MIL-C-83723 and are intermateable with that specification. Spectrums Control Advantages Custom Designs Due to the versatility provided with this product design, custom requirements can be readily accommodated. Consult Spectrum Control for your specific needs. Materials and Finishes Shell. . . . . . . . . . . . . . . . . As noted in Ordering Information Backshell. . . . . . . . . . . . . . . . . . . Copper Alloy, Nickel Plate Contacts . . . . . . . . . . . . . . . . . . Copper alloy, gold plate per . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . MIL-G-45204 (For electrical specifications, see page 204.) Ordering Information Filtered Connectors Available connector styles and shell sizes for this MIL series are shown on the following pages. Refer to these pages and the information below to develop your connector part number. F 64 20 H 41 P N 4 102 Extended Shell Indicator Shell Size 8, 10, 12, 14 16, 18, 20, 22 and 24 Contact/ Termination Type P-Pin/PC tail S-Pin/solder cup B-Socket/PC tail D-Socket/Solder cup Filter Schematic "1" = "C" feed-thru "4" = Pi MIL Series Indicator 64= MIL-C-26482 Finish H - Hermetic seal L - Fluid resistant, grommet seal Alternate Shell Position N (normal), W, X, Y, Z Filter Capacitance Specify by using EIA codes. Two significant digits plus number of zeros. Example: 102 = 1000pF 401 = 400pF * See table page 204 Shell Style A - Wall mount B - Wall mount (wide flange) C - Hermetic box mount D - Jam Nut E - Hermetic jam nut F - Straight plug 226 A I Retrofit existing connectors - We can add filters to customer supplied connectors, saving time during prototype phase and expediting system evaluation. I Design flexibility and quality assurance - We are vertically integrated with ceramic capacitors, enabling us to offer a broad selection of this critical component and ensuring design versatility and manufacturing control. I Prototypes - Our EMI filtering expertise and large capacitor inventory allow us to quickly provide a working sample of your filtered connector. I Economy and turnaround - Most components we utilize are standards, minimizing our tooling requirements and providing cost savings and a shorter lead time. I MIL and commercial applications - Reduce program costs by utilizing our extended shell connectors for both MIL spec and commercial grade connectors. I Reduce testing and qualification - Use of a QPL'd connector interface can expedite your approval process. In addition, we can filter any series of connectors . . . eliminating concerns over filter connector availability. Contact Arrangement See next page SPECTRUM CONTROL INC. * 8031 Avonia Rd. * Fairview, PA 16415 * Phone: 814-474-2207 * Fax: 814-474-2208 * Web site: www.spectrumcontrol.com SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 *1566 PRINTER 171-241 v2 12/4/06 9:43 AM Page 55 MIL-C-26482, Extended Shell Contact Arrangements (First two digits shell size, second two contact arrangement) 14-19 19 #20 20-41 41 #20 14-5 5 #16 16-8 8 #16 20-24 24 #20 16-26 26 #20 22-53 53 #20 22-55 55 #20 14-18 18 #20 18-32 18 #20 24-61 61 #20 Filtered Connectors 8-98 3 #20 Note: For availability of filtered connectors with custom requirements, such as mixed capacitance, insulated lines, ground lines or other contact arrangements, consult factory for specific part number. SPECTRUM CONTROL INC. * 8031 Avonia Rd. * Fairview, PA 16415 * Phone: 814-474-2207 * Fax: 814-474-2208 * Web site: www.spectrumcontrol.com SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 227 *1566 PRINTER 171-241 v2 12/4/06 9:43 AM Page 56 MIL-C-26482, Extended Shell MS3470 Wall Mount Receptacle Shell Size A B C D E F L 8 .828 (21.03) .594 (15.09) .446 (11.33) .062 (1.57) .087 (2.21) .575 (14.61) 1.575 (40.01) 10 .954 (24.23) .719 (18.26) .446 (11.33) .062 (1.57) .087 (2.21) .700 (17.78) 1.575 (40.01) 12 1.047 (26.59) .812 (20.62) .446 (11.33) .062 (1.57) .087 (2.21) .825 (20.96) 1.575 (40.01) 14 1.141 (28.98) .906 (23.01) .446 (11.33) .062 (1.57) .087 (2.21) .950 (24.13) 1.575 (40.01) 16 1.234 (31.34) .969 (24.61) .446 (11.33) .062 (1.57) .087 (2.21) 1.075 (27.31) 1.575 (40.01) 18 1.328 (33.73) 1.062 (26.97) .446 (11.33) .062 (1.57) .087 (2.21) 1.140 (28.96) 1.575 (40.01) 20 1.453 (36.91) 1.156 (29.36) .572 (14.53) .094 (2.39) .212 (5.38) 1.265 (32.13) 1.735 (44.07) 22 1.578 (40.08) 1.250 (31.75) .572 (14.53) .094 (2.39) .212 (5.38) 1.340 (34.04) 1.735 (44.07) 24 1.703 (43.26) 1.375 (34.93) .604 (15.34) .094 (2.39) .212 (5.38) 1.515 (38.48) 1.765 (44.83) MS3472 Wide Flange Wall Mount Receptacle Filtered Connectors Shell Size A B C D E F L 8 1.065 (27.05) .734 (18.64) .477 (12.12) .062 (1.57) .118 (3.00) .575 (14.61) 1.605 (40.77) 10 1.141 (28.98) .812 (20.62) .477 (12.12) .062 (1.57) .118 (3.00) .700 (17.78) 1.605 (40.77) 12 1.266 (32.16) .938 (23.83) .477 (12.12) .062 (1.57) .118 (3.00) .825 (20.96) 1.605 (40.77) 14 1.360 (34.54) 1.031 (26.19) .477 (12.12) .062 (1.57) .118 (3.00) .950 (24.13) 1.605 (40.77) 16 1.453 (36.91) 1.125 (28.58) .477 (12.12) .062 (1.57) .118 (3.00) 1.075 (27.31) 1.605 (40.77) 18 1.532 (38.91) 1.203 (30.56) .477 (12.12) .062 (1.57) .118 (3.00) 1.140 (28.96) 1.605 (40.77) 20 1.688 (42.88) 1.297 (32.94) .571 (14.50) .094 (2.39) .212 (5.38) 1.265 (32.13) 1.735 (44.07) 22 1.766 (44.86) 1.375 (34.93) .571 (14.50) .094 (2.39) .212 (5.38) 1.340 (34.04) 1.735 (44.07) 24 1.891 (48.03) 1.500 (38.10) .604 (15.34) .094 (2.39) .212 (5.38) 1.515 (38.48) 1.765 (44.83) MS3440 Hermetic Seal Box Mount Receptacle Shell Size A B C D E F L 10 .954 (24.23) .719 (18.26) .588 (14.94) .062 (1.57) .087 (2.21) .750 (19.05) 1.750 (44.45) 12 1.047 (26.59) .812 (20.62) .588 (14.94) .062 (1.57) .087 (2.21) .860 (21.84) 1.750 (44.45) 14 1.141 (28.98) .906 (23.01) .588 (14.94) .062 (1.57) .087 (2.21) .990 (25.15) 1.750 (44.45) 16 1.234 (31.34) .969 (24.61) .588 (14.94) .062 (1.57) .087 (2.21) 1.110 (28.19) 1.750 (44.45) 18 1.328 (33.73) 1.062 (26.97) .588 (14.94) .062 (1.57) .087 (2.21) 1.235 (31.37) 1.750 (44.45) 20 1.453 (36.91) 1.156 (29.36) .650 (16.51) .094 (2.39) .212 (5.38) 1.330 (33.78) 1.850 (46.99) 22 1.578 (40.08) 1.250 (31.75) .650 (16.51) .094 (2.39) .212 (5.38) 1.455 (36.96) 1.850 (46.99) 24 1.703 (43.26) 1.375 (34.93) .650 (16.51) .094 (2.39) .212 (5.38) 1.580 (40.13) 1.750 (44.45) Dimensions in inches (mm) 228 SPECTRUM CONTROL INC. * 8031 Avonia Rd. * Fairview, PA 16415 * Phone: 814-474-2207 * Fax: 814-474-2208 * Web site: www.spectrumcontrol.com SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 *1566 PRINTER 171-241 v2 12/4/06 9:43 AM Page 57 MIL-C-26482, Extended Shell MS3474 Jam Nut Receptacle Shell Size A B C D E L 8 .938 (23.83) 1.063 (27.00) .575 (14.61) .187 (4.75) .683 (17.35) 1.870 (47.50) 10 1.063 (27.00) 1.187 (30.15) .700 (17.78) .187 (4.75) .683 (17.35) 1.870 (47.50) 12 1.250 (31.75) 1.346 (34.19) .825 (20.96) .187 (4.75) .683 (17.35) 1.870 (47.50) 14 1.346 (34.19) 1.500 (38.10) .950 (24.13) .187 (4.75) .683 (17.35) 1.870 (47.50) 16 1.500 (38.10) 1.625 (41.28) 1.075 (27.31) .187 (4.75) .683 (17.35) 1.870 (47.50) 18 1.625 (41.28) 1.750 (44.45) 1.140 (28.96) .187 (4.75) .683 (17.35) 1.870 (47.50) 20 1.812 (46.02) 1.938 (49.23) 1.265 (32.13) .250 (6.35) .746 (18.95) 1.970 (50.04) 22 1.938 (49.23) 2.063 (52.40) 1.340 (34.04) .250 (6.35) .746 (18.95) 1.970 (50.04) 24 2.063 (52.40) 2.187 (55.55) 1.515 (38.48) .219 (5.56) .746 (18.95) 1.970 (50.04) Shell Size A B C D L 8 .938 (23.83) 1.063 (27.00) .410 (10.41) .699 (17.75) 1.750 (44.45) 10 1.063 (27.00) 1.187 (30.15) .520 (13.21) .699 (17.75) 1.750 (44.45) 12 1.250 (31.75) 1.346 (34.19) .630 (16.00) .699 (17.75) 1.750 (44.45) 14 1.346 (34.19) 1.500 (38.10) .760 (19.30) .699 (17.75) 1.750 (44.45) 16 1.500 (38.10) 1.625 (41.28) .880 (22.35) .699 (17.75) 1.750 (44.45) 18 1.625 (41.28) 1.750 (44.45) .980 (24.89) .699 (17.75) 1.750 (44.45) 20 1.812 (46.02) 1.938 (49.23) 1.110 (28.19) .762 (19.35) 1.850 (46.99) 22 1.938 (49.23) 2.063 (52.40) 1.230 (31.24) .762 (19.35) 1.850 (46.99) 24 2.063 (52.40) 2.187 (55.55) 1.390 (35.31) .762 (19.35) 1.880 (47.75) Filtered Connectors MS3449 Hermetic Seal Jam Nut Receptacle MS3475 Straight Plug Shell Size A B V Thread 8 .782 (19.86) .590 (14.99) 1/2-20 UNEF-2A 10 .926 (23.52) .720 (18.29) 5/8-24 UNEF-2A 12 1.043 (26.49) .840 (21.34) 3/4-20 UNEF-2A 14 1.183 (30.05) .965 (24.51) 7/8-20 UNEF-2A 16 1.305 (33.15) 1.090 (27.69) 1-20 UNEF-2A 18 1.391 (35.33) 1.145 (29.08) 1 1/16-18 UNEF-2A 20 1.531 (38.89) 1.270 (32.26) 1 3/16-18 UNEF-2A 22 1.656 (42.06) 1.395 (35.43) 1 5/16-18 UNEF-2A 24 1.777 (45.14) 1.520 (38.61) 1 7/16-18 UNEF-2A Dimensions in inches (mm) SPECTRUM CONTROL INC. * 8031 Avonia Rd. * Fairview, PA 16415 * Phone: 814-474-2207 * Fax: 814-474-2208 * Web site: www.spectrumcontrol.com SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 229 *1566 PRINTER 171-241 v2 12/4/06 9:43 AM Page 58 Custom Filtered Connectors Wire Harnesses Wire Harnesses Spectrum Control will add wires to the filtered connector to allow the customer to easily install the connector into the system at a lower cost. These value-added services include adding wires terminated or unterminated to all lines or only select lines, twisted pairs and labeling of wires for easy placement in your system. We can also encapsulate the wires inside the connector providing strength to the total harness. By contracting Spectrum Control to add the harness assembly, customers are assured the performance of the filtered connector has not been adversely affected. All of our custom connectors are 100% tested for integrity and effective performance. Spectrum's connector manufacturing operators are all certified to MIL-STD-2000 solder specification. We have invested in this certification to provide you with confidence that the quality of our custom construction meets the highest standards in the industry. Filtered Connectors Sole Sourced Military Connectors 230 Many systems being designed today have made use of connectors that are sole sourced items. Examples of these include MIL-C-81511, MIL-C-81703, Airborn and Lemo connectors. We will design and manufacture a custom filtered connector that specifically addresses the requirements of unique applications such as oil and gas drilling/exploration and power generation. Filtering these unique connectors is accomplished in one of two ways at Spectrum Control. We can add the required filtering to the back of the existing connector and thereby extend the length, or manufacture a new shell and then filter within that shell. This method can be utilized when the cost of the unfiltered connector is prohibitive due to the sole sourced situation in a particular connector series. SPECTRUM CONTROL INC. * 8031 Avonia Rd. * Fairview, PA 16415 * Phone: 814-474-2207 * Fax: 814-474-2208 * Web site: www.spectrumcontrol.com SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 *1566 PRINTER 171-241 v2 12/4/06 9:43 AM Page 59 Custom Filtered Connectors Connectors with Complex Schematics Spectrum Control has the capability to offer filtered connectors with complex schematics such as double L (CLCL), double Pi (CLCLC), double T (LCLCL) filters, or transient voltage suppression devices. These products may be required when the system impedances are mismatched or when an extremely fast rise in insertion loss is needed. Spectrum Control is experienced in the manufacture of these complex schematics in all of our filter products. Spectrum's engineering facility can use computer models to select the best filter type for the application. Plastic Commercial Connectors Many manufacturers in the medical and high reliability commercial markets utilize plastic connectors that subsequently require filtering. Spectrum Control will filter plastic shell connectors. This product requires special manufacturing techniques. The ground path for filtering is achieved either by using one of the connector pins or by adding an external ground strap to the metal collar. Through the use of lower cost commercial components such as formed terminals, Spectrum Control will minimize the cost of filtering this type connector. Plastic Commercial Connectors We are often approached by customers who have procured a large quantity of unfiltered connectors for a program and subsequently determined that some need to be filtered. Instead of scrapping or returning these connectors at a large expense, appropriate EMI filters can be added by Spectrum Control. The addition of filters to an existing stock of connectors can provide significant cost savings. In many cases, standard unfiltered connectors are purchased in large volumes at a discounted price. By filtering a small quantity of these standard connectors, customers typically realize total cost savings and a reduced overall lead time. SPECTRUM CONTROL INC. * 8031 Avonia Rd. * Fairview, PA 16415 * Phone: 814-474-2207 * Fax: 814-474-2208 * Web site: www.spectrumcontrol.com SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 Filtered Connectors Value-added Filtered Connectors 231 *1566 PRINTER 171-241 v2 12/4/06 9:43 AM Page 60 Quality Acceptance Test Specifications Insertion loss Performed on a sample quantity of filtered contacts, minimum acceptance levels as specified by typical insertion loss graphs. Resistance to ground The RDC on ground lines is 5 milliohms max. Marking As a minimum, all connectors shall have the Spectrum part number, date code and logo. Upon request, customer specified marking can be incorporated into the manufacturing cycle. All filtered connectors undergo extensive testing to assure that all product meets our high quality expectations. Many of the tests are performed 100% as routine and others are carried out on a sample basis when this is deemed more meaningful. Filtered Connectors Visual The connectors shall be manufactured and processed in a careful and workmanlike manner in accordance with good design and sound practice. All connectors shall be checked 100% to insure dimensions are as shown in this catalog. Capacitance Checked on 100% of the contacts per detailed specifications when measured @ 25C, 1 KHz, 0.1 to 1.0VRMS. On insulated feed-thru lines, the maximum capacitance is 25 pF. Dissipation factor 4% maximum, checked 100% @ 25C, 1KHz, 0.1 to 1.0VRMS Dielectric withstanding voltage Performed on 100% of the filtered contacts. The test voltage unless otherwise specified will be 2.5 times the working voltage as specified at 25C. This voltage will be applied for 1 to 5 seconds with the charging current limited to 50 milliamps. Insulation resistance Performed on 100% of the filtered contacts at 25C. The minimum acceptance level will be 1000 megohms at 25C and 100 megohms at 125C if required. This test will be carried out in accordance with MIL-STD-202 Method 302, test voltage of 100VDC or at rated voltage whichever is less. Spectrum has a fully qualified test laboratory and is willing to provide additional acceptance testing upon customers request, at minimal additional costs. Minimum Design Specifications All of the filtered connectors are designed to meet minimum standards shown in table below. Environmental Performance Test* Description Vibration Thermal Shock Immersion Salt Spray Moisture Resistance Shock Barometric Pressure Resistance to Solder Heat Terminal Strength Contact Resistance Life Durability Solderabilty MIL-STD-1344 MIL-STD-202 Method Condition Method Condition 1016 1001 1002 2004 3001 - II - 204 107 104 101 106 213 105 210 211 307 108 208 G A-1 A B I C B A D - * All tests are performed per applicable MIL spec. 232 Special Testing Comments** 30G for 10 to 2000 Cycles Except Step 3 is +125 degrees C Except Step 7 125% rated voltage The applied force shall be 5 lbs. .0152 max. 1000 hrs. 500 cycles - ** All parts will meet post test electricals (i.e. dielectric withstanding voltage, insulation resistance, capacitance, insertion loss and visual/mechanical). SPECTRUM CONTROL INC. * 8031 Avonia Rd. * Fairview, PA 16415 * Phone: 814-474-2207 * Fax: 814-474-2208 * Web site: www.spectrumcontrol.com SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 *1566 PRINTER 171-241 v2 12/4/06 9:43 AM Page 61 233 *1566 PRINTER 171-241 v2 12/4/06 9:43 AM Page 62 QuietshieldTM Gaskets & Shielding Gaskets & Shielding Signal & Power Integrity Group With years of experience in the design and manufacture of filtering and shielding products, Spectrum Control has a unique perspective on EMI and its control. Spectrum Control offers all the products necessary to protect electrical equipment from failures due to EMI. As part of our broad range of products, Spectrum Control offers a line of shielding products intended to enable the user to seal their electronic enclosure. A variety of products are available including fabric-over-foam, conductive elastomer and wire mesh gaskets. In combination with our filtering and TVSS products, Spectrum Control can solve EMI problems while providing you with increased design flexibility, reduced time-to-market and peak system performance. Index Page Gasket & Shielding Selection Guide...235 Shielding Theory and Introduction ....236 Quietshield Gaskets ............................237 Quietshield Fabric-over-Foam Gaskets ...........238-239 Shielding Tapes & Fabric....................240 Wire Mesh Gaskets .............................241 Conductive Elastomers .......................242 Part Number System ..........................243 CERTIFIED 234 www.specemc.com/quietshield SPECTRUM CONTROL INC. * 8031 Avonia Rd. * Fairview, PA 16415 * Phone: 814-474-2207 * Fax: 814-474-2208 * Web site: www.spectrumcontrol.com SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 *1566 PRINTER 171-241 v2 12/4/06 9:44 AM Page 63 Gaskets & Shielding Selection Guide Fabric Over Foam Waved Metal and Fabric Over Foam I Standard D-Sub shapes I Low cost I Low closure force I Improves grounding I High shielding I High shielding effectiveness I Improves high frequency attenuation I Multiple fabric plating I Aluminum, stainless I Elastomer core available I Excellent heat and corrosion resistance I Good shielding I Excellent water resistance I Control static electric discharge I High frequency absorber I High conductivity I Telecommunications equipment I Commercial enclosures I Electronic enclosures I Military equipment I Industrial control I Tempest systems I Electrical test units I Cellular base stations I Electrical cabinets I Tempest computers and peripherals I Unshielded cables and wires I Medical electronics I Electronic cabinets Applications I Profiles, sheets or gaskets Conductive Silicone I Secured communications I Outdoor communications Gaskets & Shielding I Commercial enclosures I Conductive or nonconductive PSA I Sheet or standard widths I PSA attachment I Industrial process equipment I Aerospace applications I FED/MIL Approvals I FED/MIL Approvals UL 94VTM-1, V0 core optional I Shielding Effectiveness Range/Performance Performance Characteristics Fabric & Tape I Low cost I Multiple fabric plating and core material Metal Mesh 68-88 dB from 30 MHz to 5 GHz I Temperature Range To 200 C I Surface Resistance <0.08 ohms I Compression Set <5% UL 94VTM-1, I Shielding Effectiveness Range/Performance 1 MHz - 5 GHz I Temperature Range -55 C to +125 C I Compression 80% I Shielding Effectiveness Range/Performance 68-88 dB from 30 MHz to 1 GHz I Temperature Range To 200 C I Surface Resistance <0.08 ohms I Compression <5% I Shielding Effectiveness Range/Performance 1 MHz to 5 GHz I Temperature Range -55 C to 200 C I Surface Resistance <0.08 ohms I Compression Set 15% I Shielding Effectiveness Range/Performance 60 dB at 30 MHz to 1 GHz I Temperature Range -55 C to 200 C I Surface Resistance 5 -10 ohms-cm I Elongation % 240% SPECTRUM CONTROL INC. * 8031 Avonia Rd. * Fairview, PA 16415 * Phone: 814-474-2207 * Fax: 814-474-2208 * Web site: www.spectrumcontrol.com SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 235 *1566 PRINTER 171-241 v2 12/4/06 9:44 AM Page 64 Shielding Theory and Introduction Shielding Theory Electromagnetic shielding is used to prevent electromagnetic signals such as radio signals from leaving or entering a box or enclosure. Signals inadvertently emitted by an electronic device can cause distortion or interruption in normal radio communications in a localized area. This is the basis of most laws and regulations concerning electromagnetic interference. In addition, normal radio signals can cause unprotected electronic devices to malfunction. Depending on the device's function, a malfunction in the device could be a minor inconvenience such as static on a radio, or life threatening such as the malfunction of a life support system at a hospital. The electromagnetic shield in most cases is the electronic housing itself. The housing/shield forms a metal cage around the electronic circuits in a device. Most of the electromagnetic signal is absorbed with a small portion (3 to 10 dB) of the signal reflected off the metal housing. Most of the absorbed signal creates alternating currents at radio frequencies which travels on the surface of metal. This allows the electromagnetic shield to keep signals from outside the enclosure on the outside of the shield and signals from inside signals on the inside of the shield. SHIELDING EFFECTIVENESS TYPICAL SHIELDING EFFECTIVENESS 100. 40 dB 110 20 dB 60 dB 100 Wavelength to Frequency 10. Shielding Effectiveness (dB) Aperture Length (Wavelength - Inches) Gaskets & Shielding Introduction The shield will continue to function as long as there are no holes in the electromagnetic shield which would allow the currents to flow from one side of the shield to the other. Holes are a necessity in an electronic enclosure. Connectors, wires, and cables are needed to transmit information to and from electronic devices. Doors and covers are needed to get access to components to maintenance, service, and keypads may also be required. The problem is that all of these items cause openings in the shield which reduce the performance of the shield. Special devices such as shielding gaskets, shielding ventilation panels, shielded filtered connectors, and shielded switches minimize the effect of a hole in the shield. The length of the hole and wavelength of the signal that needs to be shielded are the major factors determining the shielding effectiveness of an electronic enclosure. The distance between spotwelds, or screws which hold a metal housing together count as long narrow holes. Higher frequencies (lower wavelengths) flow more easily through smaller holes, and so the highest frequency needed to be shielded is the frequency of concern when designing shielding. Aperture versus frequency charts can give a rough estimate of the shielding effectiveness of a metallic electronic housing. 80 dB 1. .1 .01 .001 100 KHz 90 80 70 60 50 40 30 20 10 0 1 MHz 10MHz 100MHz Frequency (MHz) 1GHz 10GHz 100GHz 0 100 200 300 400 500 600 700 800 900 Frequency (MHz) Test Methods: ASTM D-4935-89 Test Fixture: Flanged coaxial transmission line 236 SPECTRUM CONTROL INC. * 8031 Avonia Rd. * Fairview, PA 16415 * Phone: 814-474-2207 * Fax: 814-474-2208 * Web site: www.spectrumcontrol.com SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 1000 *1566 PRINTER 171-241 v2 12/4/06 9:44 AM Page 65 QuietshieldTM Fabric-over-Foam Gaskets Features I I I I Maintain shielding effectiveness across seams or gaps Shielding Effectiveness (SE) of 70 - 100 dB between 1 MHz to 18 GHz Flexible and conformable No creasing or tearing Lightweight material Profile Gaskets Quietshield EMI/RFI Gaskets maintain shielding effectiveness (SE) across a seam or gap in the electronic equipment's shielding material. Quietshield gaskets provide unique solutions to your most stringent shielding, grounding, ESD and packaging requirements. It's the cost-effective avenue for creativity in design. These gaskets consist of polyurethane foam combined with highly conductive fabrics. Specially designed polyurethane foam is soft, resilient and provides the perfect fit. Our gaskets are made with seven different types of fabric plating and two types of thermal adhesive, standard or flame retardant. Our flame retardant adhesive complies with UL94VTM-1 and VTM-0. If necessary, the polyurethane foam core can also be plated with Cu and Ni to provide additional conductivity. Fabric-over-Foam Gaskets, unlike elastomer or finger strip gaskets, provide softness for easy application with a variety of materials and designs at low cost. The best quality with high conductivity, low electrical resistance and minimum oxidation can be achieved by using gold gaskets with additional gold plating to provide superior shielding. Profile gaskets are currently available in a variety of shapes and lengths. Spectrum Control's gaskets provide a variety of applications with lightweight and flexible solutions. Various thicknesses and shapes are available. These range from commonly used ones such as rectangular and "D" shape, to uncommon ones such as FL-shape (folding leaf) and DD-shape (Double DD-shape). We are able to produce gaskets with different shapes and sizes, based upon the customer's requests. The mounting style available for most profile gaskets is pressure sensitive adhesive.These adhesives allow simple place and press mounting on smooth and clean metal surfaces.The parts can be cut to the desired length with common scissors or ordered to the exact length required. The adhesive provides high strength with aggressive initial tack, which increases in strength over time or after exposure to elevated temperatures. I/O Gaskets Spectrum Control offers a complete line of standard and custom I/O connector Electromagnetic Shielding Gaskets. I/O gaskets are flat gaskets used to provide a ground contact between a metal connector and the electronic enclosure or mating connector. They insure that the shield remains continuous from the input/output cable to the electronic enclosure. I/O Gaskets are available in the same materials as the fabric-over-foam profile gaskets, or as all-metal waved gaskets. Spectrum Control's line of metal waved gaskets is designed to minimize the gaps between a D-Sub connector and the panel it is mounted to. These gaskets ensure the maximum "gap length" will not exceed the wave pitch, 0.200" (5.08 MM), even on surfaces with poor flatness. This ensures maximum filter performance to 1GHz and beyond. Test Shielding Effectiveness* Composition (STD) Plating (STD) Temperature Limit Abrasion Resistance Electric Resistance Flamibility Rating** Shelf Life*** Performance 68 dB - 88 dB Woven Copper and Nickel 200C Good <0.08 Ohm 94VTM-1, V0 Grade 20 years Gaskets & Shielding I * Provides shielding effectiveness of 68 dB min. between 30 MHz to 1 GHz, this will vary slightly depending on fabric type. ** Rubber rating only. *** Fabric over foam gaskets. SPECTRUM CONTROL INC. * 8031 Avonia Rd. * Fairview, PA 16415 * Phone: 814-474-2207 * Fax: 814-474-2208 * Web site: www.spectrumcontrol.com SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 237 *1566 PRINTER 171-241 v2 12/4/06 9:44 AM Page 66 QuietshieldTM Fabric-over-Foam Profile Gaskets Rectangular Type "R" Knife Edge Type "K" Flat Type "R" H H H W Gaskets & Shielding W W 1.000 0.118 0.154 0.158 0.158 0.130 0.197 0.252 0.315 0.374 0.374 0.394 0.102 0.394 0.488 0.500 0.252 0.500 0.512 0.512 0.984 H H 0.374 0.079 0.118 0.079 0.158 0.189 0.197 0.126 0.472 0.126 0.374 0.394 0.400 0.236 0.370 0.126 0.500 0.500 0.118 0.394 0.394 Part Number 57R121C037-xxxx 57R1211208-xxxx 57R1211512-xxxx 57R1211608-xxxx 57R1211616-xxxx 57R1211913-xxxx 57R1212020-xxxx 57R1212512-xxxx 57R1213247-xxxx 57R1213713-xxxx 57R1213737-xxxx 57R1213939-xxxx 57R1214012-xxxx 57R1214022-xxxx 57R1214937-xxxx 57R1215013-xxxx 57R1215025-xxxx 57R1215050-xxxx 57R1215112-xxxx 57R1215140-xxxx 57R1219839-xxxx C-Fold Type "C" W 0.118 0.158 0.158 0.158 0.158 0.197 0.197 0.197 0.197 0.197 0.236 0.236 0.276 0.276 0.276 0.276 0.276 0.299 0.315 0.315 0.354 0.394 0.394 0.394 0.394 0.472 0.472 0.512 0.512 0.512 0.551 H 0.039 0.031 0.035 0.039 0.047 0.020 0.039 0.047 0.059 0.071 0.039 0.059 0.020 0.039 0.047 0.059 0.071 0.063 0.031 0.039 0.039 0.020 0.039 0.047 0.071 0.039 0.059 0.028 0.035 0.059 0.059 W Part Number 57R1211204-xxxx 57R1211603-xxxx 57R1211604-xxxx 57R1211604-xxxx 57R1211605-xxxx 57R1212002-xxxx 57R1212004-xxxx 57R1212005-xxxx 57R1212006-xxxx 57R1212007-xxxx 57R1212404-xxxx 57R1212406-xxxx 57R1212802-xxxx 57R1212804-xxxx 57R1212805-xxxx 57R1212806-xxxx 57R1212807-xxxx 57R1213006-xxxx 57R1213203-xxxx 57R1213204-xxxx 57R1213604-xxxx 57R1214002-xxxx 57R1214004-xxxx 57R1214005-xxxx 57R1214007-xxxx 57R1214704-xxxx 57R1214706-xxxx 57R1215103-xxxx 57R1215104-xxxx 57R1215106-xxxx 57R1215506-xxxx W 0.492 0.500 0.500 0.752 H 0.138 0.094 0.098 0.252 Part Number 57K1214914-xxxx 57K1215009-xxxx 57K1215010-xxxx 57K1217525-xxxx Double D-Shape "V" H W W H Part Number 0.378 0.126 57V1213813-xxxx Folding Leaf Type "U" W H W H Part Number 0.709 0.311 57U1217131-xxxx Round Type "O" P-Shape Type "P" H H W W W 0.295 0.315 0.394 0.421 0.681 H 0.138 0.315 0.394 0.386 0.591 Part Number 57L1213014-xxxx 57L1213232-xxxx 57L1213939-xxxx 57L1214339-xxxx 57L1216859-xxxx W H Part Number 0.315 0.079 57P1213208-xxxx 0.520 0.130 57P1215216-xxxx L-Shape Type "L" H W 0.430 0.433 0.551 0.578 238 H 0.395 0.433 0.591 0.673 D-Shape "D" W Part Number 57L1214339-7200 57L1214343-7200 57L1215559-7200 57L1215767-7200 W W 0.090 0.091 0.102 0.118 0.118 0.150 0.150 0.158 0.197 0.236 0.236 0.236 0.236 0.252 0.256 0.256 0.315 0.354 0.354 0.374 0.386 0.394 0.394 0.394 0.394 0.394 0.394 0.394 0.394 0.433 0.433 0.433 0.709 0.709 0.709 H 0.091 0.126 0.126 0.079 0.138 0.059 0.118 0.157 0.197 0.079 0.177 0.197 0.217 0.118 0.134 0.197 0.394 0.118 0.126 0.236 0.252 0.157 0.177 0.197 0.217 0.236 0.276 0.295 0.394 0.138 0.177 0.217 0.551 0.787 0.906 Part Number 57D1210909-xxxx 57D1210912-xxxx 57D1211012-xxxx 57D1211208-xxxx 57D1211214-xxxx 57D1211506-xxxx 57D1211512-xxxx 57D1211616-xxxx 57D1212020-xxxx 57D1212408-xxxx 57D1212418-xxxx 57D1212420-xxxx 57D1212422-xxxx 57D1212512-xxxx 57D1212514-xxxx 57D1212520-xxxx 57D1213240-xxxx 57D1213512-xxxx 57D1213513-xxxx 57D1213725-xxxx 57D1213925-xxxx 57D1213916-xxxx 57D1213918-xxxx 57D1213920-xxxx 57D1213922-xxxx 57D1213924-xxxx 57D1213928-xxxx 57D1213930-xxxx 57D1213939-xxxx 57D1214314-xxxx 57D1214318-xxxx 57D1214322-xxxx 57D1217155-xxxx 57D1217177-xxxx 57D1217191-xxxx W W 0.098 0.106 0.126 0.177 0.197 0.347 0.394 0.433 Part Number 57O1211010-xxxx 57O1211111-xxxx 57O1211313-xxxx 57O1211818-xxxx 57O1212020-xxxx 57O1213535-xxxx 57O1213939-xxxx 57O1214343-xxxx Typical location and position of tape NOTE: All dimensions in inches SPECTRUM CONTROL INC. * 8031 Avonia Rd. * Fairview, PA 16415 * Phone: 814-474-2207 * Fax: 814-474-2208 * Web site: www.spectrumcontrol.com SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 *1566 PRINTER 171-241 v2 12/4/06 9:44 AM Page 67 QuietshieldTM Fabric-over-Foam & Waved Metal I/O Gaskets Specifications Material . . . . . . . . . . . . . . . . . . . . Beryllium Copper, CA 172 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (per QQ-C-533) Finish. . . . . . . . . . . . . . . . . . STD: Electro tin plate, 100 micro . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . inches (per MIL-T-10727) For RoHS: Nickel - change last 2 p/n digits to - NI For Hi-Rel: Gold - change last 2 p/n digits to - AU Material Thickness. . . . . . . . . . . . . . . . . . . .005" (.13mm) compressed Wave Height . . . . . . . . . . . . . . . . . . . . . . . . . . . . .030"+.020/-.015 Waved Metal Front Mount Grounding/Shielding Gasket (shown in free state) Wave Height Rear Mount . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (.76+.51/-.38mm) Length increase when flattened . . . . . . . . . . . . . . . . 0.008" (.20mm) per inch Waved Metal Gaskets (Select part number by filling in "xxx": 572019-00xxx-70) Mounting: Front mounted pin or socket connector, rear mounted pin connector. 9 15 25 37 50 A .020 (0.51) B .020 (0.51) C .020 (0.51) D .020 (0.51) E .005 (0.13) 1.213 (30.81) 1.541 (39.14) 2.088 (53.04) 2.729 (69.32) 2.635 (66.93) .984 (24.99) 1.312 (33.32) 1.852 (47.04) 2.500 (63.50) 2.406 (61.11) .777 (19.74) 1.105 (28.07) 1.645 (41.78) 2.293 (58.24) 2.190 (55.63) .600 (15.24) .600 (15.24) .600 (15.24) .600 (15.24) .710 (18.03) .440 (11.18) .440 (11.18) .440 (11.18) .440 (11.18) .550 (13.97) "xxx" C C 100 102 BB 103 AA 104 Mounting: Rear mounted socket connectors only. Shell Size 9 15 25 37 50 D E D .120 (3.05) 101 D D A .020 (0.51) B .020 (0.51) C .020 (0.51) D .020 (0.51) E .005 (0.13) F .005 (0.13) G .020 (0.51) 1.213 (30.81) 1.541 (39.14) 2.088 (53.04) 2.729 (69.32) 2.635 (66.93) .984 (24.99) 1.312 (33.32) 1.852 (47.04) 2.500 (63.50) 2.406 (61.11) .450 (11.43) .670 (17.02) 1.110 (28.19) 1.550 (39.37) 1.550 (39.37) .660 (16.76) .988 (25.10) 1.528 (38.81) 2.176 (55.27) 2.082 (52.88) .324 (8.23) .324 (8.23) .324 (8.23) .324 (8.23) .436 (11.07) .360 (9.14) .360 (9.14) .360 (9.14) .360 (9.14) .470 (11.94) .600 (15.24) .600 (15.24) .600 (15.24) .600 (15.24) .710 (18.03) C C "xxx" 105 E F G .120 (3.05) 106 107 B 108 AA Gaskets & Shielding Shell Size 109 Fabric-over-Foam I/O Gaskets Shell Thickness Size A 0.012 1 0.040 0.070 0.012 2 0.040 0.070 0.012 3 0.040 0.070 0.012 4 0.040 0.070 0.012 5 0.040 0.070 Dimensions D E F 0.746 1.213 (18.95) (30.81) 0.984 (24.99) 0.400 (10.16) 0.750 (19.05) 1.074 1.541 (27.28) (39.14) 1.312 (33.32) 0.400 (10.16) 0.750 (19.05) 1.614 2.088 (41.00) (53.04) 1.852 (47.04) 0.400 (10.16) 0.750 (19.05) 2.266 2.720 (57.56) (69.09) 2.500 (63.50) 0.400 (10.16) 0.750 (19.05) 2.158 2.63 (54.81) (66.80) 2.406 (61.11) 0.500 (12.70) 0.850 (21.59) B C Fabric Type nonwoven woven woven nonwoven woven woven nonwoven woven woven nonwoven woven woven nonwoven woven woven Part Number 57F01-D112-1275 57F11-D140-1275 57F11-D170-1275 57F01-D212-1575 57F11-D240-1575 57F11-D270-1575 57F01-D312-2075 57F11-D340-2075 57F11-D370-2075 57F01-D412-2775 57F11-D440-2775 57F11-D470-2775 57F01-D512-2685 57F11-D540-2685 57F11-D570-2685 R.060 (1.52) 2 PLC B B E F D D C R.130 (3.30) 2 PLC Dimensions in inches (mm) SPECTRUM CONTROL INC. * 8031 Avonia Rd. * Fairview, PA 16415 * Phone: 814-474-2207 * Fax: 814-474-2208 * Web site: www.spectrumcontrol.com SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 239 *1566 PRINTER 171-241 v2 12/4/06 9:44 AM Page 68 Shielding Tapes & Fabric Flexible and lightweight tapes provide easy installation and high conductivity and low electrical resistance provide a good shielding effect. Our products use stronger pressure sensitive adhesive to provide better adhesion. Standard widths are 1", 2", 3" and 42". Standard roll lengths are 200'. Spectrum Control's conductive tapes consist of conductive fabric and adhesive which can be either conductive or non-conductive. Conductive tapes come in various types: conductive fabric tapes, Cu/Al foil tapes and double side conductive adhesive tapes. Anti-corrosion coating is done on foil tapes and flame retardant coating is available, which complies with UL94VTM-1 and VTM-0. Styles Gaskets & Shielding * * * * * * * 240 Non-woven polyester taffeta Conductive woven polyester taffeta Woven ripstop Woven DTY filament Mesh Aluminum foil Copper foil Material Conductive Woven Conductive Woven Conductive Woven Conductive Woven Conductive Woven Conductive Rip-Stop Conductive Rip-Stop Conductive Rip-Stop Conductive Rip-Stop Conductive Non-Woven Conductive Non-Woven Conductive Non-Woven Conductive Mesh Conductive Mesh Conductive Mesh Aluminum Aluminum Copper Plating Weight (lb/sf) Weight (g/sm) Thickness (mm) Cu/Ni Cu/Ni/Au Cu/Ni/Fe Cu/Ni/Ag Cu/Ni/Resin Cu/Ni Cu/Ni/Ag Cu/Ni/Fe Cu/Ni/Resin Cu/Ni Cu/Ni Cu/Ni Cu/Ni Cu/Ni/Resin Cu/Ni/Au 0.015566 0.005325 0.016385 0.015975 0.016385 0.014951 0.015566 0.014951 0.014951 0.013927 0.024372 0.024577 0.005120 0.005523 0.003072 76.0 26.0 80.0 78.0 80.0 73.0 76.0 73.0 73.0 68.0 119.0 120.0 25.0 27.0 15.0 0.08 0.10 0.10 0.10 0.11 0.09 0.10 0.09 0.09 0.16 0.32 0.43 0.08 0.08 0.08 0.08 0.08 0.80 Tensile Strength (Kgf) Surface Resistance (ohm/sq) Shielding Effectiveness (min dB) 38.0 29.0 32.0 32.0 32.0 39.0 34.0 33.0 34.0 10.0 21.0 30.0 18.0 19.0 17.0 0.20 0.06 0.06 0.06 0.06 0.08 0.06 0.06 0.06 0.08 0.06 0.06 0.20 0.10 0.10 0.05 0.07 0.02 58 72 63 67 78 62 78 63 68 72 80 83 52 53 57 Part Number 57T1A14200-XXXX 57T1A24200-XXXX 57T1A64200-XXXX 57T1A34200-XXXX 57T1A44200-XXXX 57T2A14200-XXXX 57T2A34200-XXXX 57T2A64200-XXXX 57T2A44200-XXXX 57T0A14206-XXXX 57T0A14201-XXXX 57T0A14202-XXXX 57T4014200-XXXX 57T4044200-XXXX 57T4034200-XXXX 57T7A-4200-XXXX 57T7C-4200-XXXX 57T8A-4200-XXXX SPECTRUM CONTROL INC. * 8031 Avonia Rd. * Fairview, PA 16415 * Phone: 814-474-2207 * Fax: 814-474-2208 * Web site: www.spectrumcontrol.com SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 *1566 PRINTER 171-241 v2 12/4/06 9:44 AM Page 69 Wire Mesh Gaskets Spectrum Control's mesh gaskets include all mesh gaskets and elastomer core mesh gaskets. Layers of knitted wire are covered over the wire core in Spectrum Control's all mesh gaskets. Using its electrical conductivity, they are used between two surfaces to maintain electrical continuity while shielding electromagnetic waves. They offer good resilience and excellent heat and corrosion resistance. Any types of metal can be used to produce mesh gaskets but common materials used are aluminum, stainless steel and monel. Spectrum Control's elastomer core mesh gaskets are composed of wire mesh over elastomer core. Both these materials provide excellent shielding effects creating the maximum outcome. Both All mesh gaskets and Elastomer core mesh gaskets can be produced with different types of materials and also in many different forms. All Mesh Gaskets - Structure Rectangular Type "R" Elastomer Core Mesh Gaskets Round Type "O" P-Type "P" P-Type "P" H H W W 0.138 0.142 0.181 0.197 0.189 0.236 0.252 0.256 0.354 H 0.059 0.098 0.102 0.118 0.189 0.118 0.063 0.177 0.118 Part Number 57R40-1406-xxxx 57R40-1410-xxxx 57R40-1810-xxxx 57R40-2012-xxxx 57R40-2020-xxxx 57R40-2412-xxxx 57R40-2506-xxxx 57R40-2618-xxxx 57R40-3512-xxxx Round Type "O" W 0.138 0.138 0.138 0.205 0.205 0.264 H 0.512 0.638 0.795 0.516 0.768 0.764 Part Number 57P40-1451-xxxx 57P40-1464-xxxx 57P40-1478-xxxx 57P40-2152-xxxx 57P40-2177-xxxx 57P40-2626-xxxx Double P-Type "V" W Part Number 57O40-0404-xxxx 57O40-0606-xxxx 57O40-0808-xxxx 57O40-1010-xxxx 57O40-1414-xxxx 57O40-1616-xxxx 57O40-1919-xxxx 57O40-2222-xxxx 57O40-3131-xxxx 57O40-3636-xxxx W 0.138 0.138 0.138 0.205 0.205 0.264 H 0.512 0.638 0.795 0.516 0.768 0.764 W Part Number 57P46-1451-xxxx 57P46-1464-xxxx 57P46-1480-xxxx 57P46-2152-xxxx 57P46-2177-xxxx 57P46-2676-xxxx Rectangular Type "R" H H W W W 0.039 0.059 0.079 0.102 0.138 0.157 0.185 0.217 0.307 0.362 H W W W 0.138 0.138 0.138 0.205 0.205 0.205 0.264 0.264 0.264 H 0.386 0.512 0.638 0.642 0.768 1.016 0.638 0.764 1.012 Part Number 57V40-1439-xxxx 57V40-1451-xxxx 57V40-1464-xxxx 57V40-2164-xxxx 57V40-2177-xxxx 57V40-2100-xxxx 57V40-2669-xxxx 57V40-2676-xxxx 57V40-2600-xxxx W W W 0.039 0.059 0.079 0.102 0.138 0.157 0.185 0.217 0.307 0.362 Part Number 57O46-0404-xxxx 57O46-0606-xxxx 57O46-0808-xxxx 57O46-1010-xxxx 57O46-1414-xxxx 57O46-1616-xxxx 57O46-1919-xxxx 57O46-2222-xxxx 57O46-3131-xxxx 57O46-3636-xxxx Double P-Type "V" H W 0.138 0.142 0.181 0.189 0.197 0.236 0.252 0.256 0.256 0.354 H 0.059 0.098 0.102 0.189 0.118 0.118 0.063 0.157 0.177 0.118 W Part Number 57R46-1406-xxxx 57R46-1410-xxxx 57R46-1810-xxxx 57R46-1919-xxxx 57R46-2012-xxxx 57R46-2412-xxxx 57R46-2506-xxxx 57R46-2616-xxxx 57R46-2618-xxxx 57R46-3512-xxxx H Gaskets & Shielding H W H W 0.138 0.138 0.138 0.205 0.205 0.205 0.264 0.264 0.264 H 0.386 0.512 0.638 1.016 0.642 0.768 1.012 0.638 0.764 W Part Number 57V46-1439-xxxx 57V46-1451-xxxx 57V46-1464-xxxx 57V46-2100-xxxx 57V46-2164-xxxx 57V46-2177-xxxx 57V46-2600-xxxx 57V46-2669-xxxx 57V46-2676-xxxx NOTE: All dimensions in inches SPECTRUM CONTROL INC. * 8031 Avonia Rd. * Fairview, PA 16415 * Phone: 814-474-2207 * Fax: 814-474-2208 * Web site: www.spectrumcontrol.com SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 241 *1566 PRINTER 171-241 v2 12/4/06 9:44 AM Page 70 Conductive Elastomers PHOTO TO COME Spectrum Control's conductive elastomers are composed of silicon rubber using its heat resistant property. Unique features of conductive elastomers include water resistance and elimination of static electricity, which is different from general foam gaskets. It also acts as an absorber at high frequency showing 60dB shielding at 30MHz ~ 10GHz. Excellent electrical conductivity, grounding and shielding are provided. Due to its superior properties conductive elastomers are often used in military equipment. They can be produced in many forms such as sheets, molded parts, die-cuts or strips. Typical Properties of Silicone Gaskets Material Profiles Conductive Silicone Gaskets & Shielding (Rubber) Gasket Hardness Shore Micro 97-5 Volume Resistivity ohms 5-10 Elongation % 240 Tensile Strength Mpa 4.43 Tear Resistance KN/m 10.4 Texture and Color Black or Beige Specific Gravity 1.39 Temperature Range -55 to +200 Part Number ID Size OD Size Hollow O (A) P (P) Type Profile 57A99-0606-xxxx 0.019 0.059 Hollow A 57A99-0909-xxxx 0.039 0.091 Hollow A 57A99-2828-xxxx 0.196 0.276 Hollow A 57D98-2525-xxxx W:0.250 H:0.250 D-Tubing D 57H98-3022-xxxx W:0.295 H:0.217 Channel H 57O98-1414-xxxx O-Profile O 57P98-9830-xxxx W:0.984 H:0.295 P-Shape P 0.138 O (O) Channel (H) D (D) NOTE: All dimensions in inches 242 SPECTRUM CONTROL INC. * 8031 Avonia Rd. * Fairview, PA 16415 * Phone: 814-474-2207 * Fax: 814-474-2208 * Web site: www.spectrumcontrol.com SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 *1566 PRINTER 171-241 v2 12/4/06 9:44 AM Page 71 Typical Fabric-over-Foam Cross-section W - width QuietshieldTM Gaskets Part Numbers Conductive Fabric H - height Polyurethane Core Pressure Sensitive Adhesive 57D1211205 - 7200 Shapes/Styles D, R, L, P, C, K, O, V, U -- Fabric-over-Foam R, P, O, V -- Mesh A, D, H, J, P, O, P, Z -- Conductive Elastomer F -- Formed/Stamped T -- Tape/Foil/Fabric S - Special Fabric/Foil 0 -- Non-woven 1 -- Woven 2 -- Woven Ripstop 3 -- Woven DTY Filament 4 -- Mesh 5 -- Net 6 -- Knit 7 -- Aluminum Foil 8 -- Copper Foil 9 -- None Material 0 -- None 1 -- Foam neoprene, no PSA 2 -- Foam neoprene, conductive PSA 3 -- Foam neoprene, non-conductive PSA 4 -- Solid 5 -- Sponge 6 -- Silicone 7 -- Hollow silicone 8 -- Conductive elastomer 9 -- Hollow conductive elastomer A -- No core, conductive PSA one side B -- No core, non-conductive PSA one side C -- No core, conductive PSA double side D -- No core, non-conductive PSA double side E -- Monel mesh with silicone sponge F -- Al wire with silicone sponge G -- No core, conductive, no PSA H -- Monel mesh solid Z -- Z-foam Note: PSA = pressure sensitive adhesive Plating 1 -- Copper - Nickel (std) 2 -- Copper - Nickel - Gold 3 -- Copper - Nickel - Silver 4 -- Copper - Nickel - Resin 5 -- Copper - Nickel - P.S. Coating 6 -- Iron - Copper - Nickel 7 -- Copper - Nickel - Carbon 8 -- Silver - Copper 9 -- Ni - Graphite 0 -- None - -- Nickel - silver Length Length (ex: -1205 = 12.05) [Standard is 36 (-3600)] Custom part number for special application (-X001) X must be the first character Height/Thickness Profiles -- thickness in inches I/O -- height in inches Width or Type & Size Profiles -- width in inches I/O -- first digit is I/O Type (D, d-sub) second digit is shell size (1, 2, 3, 4, or 5) Gaskets & Shielding Gaskets Ordering Information Example: 57D1211205 - 7200 The part number shown represents a foam-over-fabric gasket with woven foam made of neoprene, conductive PSA. The gasket has copper-nickel plating that is 0.120" wide x 0.050" thick x 72" long. Sample Kit Quietshield sample kits are available from Spectrum Control Inc. Order number KIT-QSHIELD-57. SPECTRUM CONTROL INC. * 8031 Avonia Rd. * Fairview, PA 16415 * Phone: 814-474-2207 * Fax: 814-474-2208 * Web site: www.spectrumcontrol.com SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 243 *1566 PRINTER 171-241 v2 12/4/06 9:44 AM Page 72 Military Cross Reference Qualified Components Military Designation MIL-F-15733 Spectrum Part Number Military Designation MIL-F-15733 Spectrum Part Number Military Designation MIL-F-15733 Spectrum Part Number /23-0001 /23-0002 /23-0003 /23-0004 /23-0005 /23-0006 /23-0007 /23-0008 /23-0009 /23-0010 /23-0011 /23-0012 /23-0013 /23-0014 /23-0015 /23-0016 /23-0017 /23-0018 /23-0019 /23-0020 /23-0021 /23-0022 /23-0023 /23-0024 /23-0025 /23-0026 /23-0027 /23-0028 /23-0029 /23-0030 /23-0031 /23-0032 /23-0033 /23-0034 /23-0035 /23-0036 /23-0037 /23-0038 /23-0039 /23-0040 /23-0041 /23-0042 /23-0043 /23-0044 /23-0045 /23-0046 /23-0047 /23-0049 /23-0050 /23-0051 /23-0052 /23-0053 /23-0054 /23-0055 /23-0056 /23-0057 /23-0058 51-390-001 51-390-002 51-390-003 51-390-004 51-390-301 51-390-302 51-390-005 51-390-006 51-390-007 51-390-008 51-390-303 51-390-304 51-390-009 51-390-010 51-390-011 51-390-012 51-390-305 51-390-306 51-390-013 51-390-014 51-390-015 51-390-016 51-390-307 51-390-308 51-390-017 51-390-018 51-390-019 51-390-020 51-390-309 51-390-310 51-390-021 51-390-022 51-390-023 51-390-024 51-390-311 51-390-312 51-390-025 51-390-026 51-390-027 51-390-028 51-390-313 51-390-314 51-390-029 51-390-030 51-390-031 51-390-032 51-390-315 51-390-033 51-390-034 51-390-035 51-390-036 51-390-317 51-390-318 51-390-037 51-390-038 51-390-039 51-390-040 /23-0059 /23-0060 /24-0001 /24-0002 /24-0003 /24-0004 /24-0005 /24-0006 /24-0007 /24-0008 /24-0009 /24-0010 /24-0011 /24-0012 /24-0013 /24-0014 /24-0015 24-0016 /24-0017 /24-0018 /24-0019 /24-0020 /24-0021 /24-0022 /24-0023 /24-0024 /25-0001 /25-0002 /25-0003 /25-0004 /25-0005 /25-0006 /25-0007 /25-0008 /25-0009 /25-0010 /25-0011 /25-0012 /25-0013 /25-0014 /25-0015 /25-0016 /25-0017 /25-0018 /25-0019 /25-0020 /25-0021 /25-0022 /25-0023 /25-0024 /26-0001 /26-0002 /26-0003 /26-0004 /26-0005 /26-0006 /26-0007 /26-0008 51-390-319 51-390-320 51-353-064 51-353-065 51-444-049 51-444-050 51-353-066 51-353-067 51-444-051 51-444-060 51-353-068 51-353-069 51-353-070 51-353-071 51-353-072 51-353-073 51-353-074 51-353-075 51-444-052 51-444-053 51-444-054 51-444-055 51-444-056 51-444-057 51-444-058 51-444-059 51-353-052 51-311-308 51-353-053 51-311-309 51-353-054 51-311-310 51-382-603 51-353-055 51-353-056 51-311-311 51-353-057 51-382-604 51-444-037 51-311-354 51-444-038 51-311-355 51-444-039 51-311-356 51-382-608 51-444-040 51-444-041 51-311-357 51-444-042 51-382-609 51-353-076 51-353-336 51-353-077 51-353-078 51-311-312 51-353-079 51-353-080 51-351-603 /26-0009 /26-0010 /26-0011 /26-0012 /26-0013 /26-0014 /26-0015 /26-0016 /26-0017 /26-0018 /26-0019 /26-0020 /26-0021 /26-0022 /26-0023 /26-0024 /27-0001 /27-0002 /27-0003 /27-0004 /27-0005 /27-0006 /27-0007 /27-0008 /27-0009 /27-0010 /27-0011 /27-0012 /27-0013 /27-0014 /27-0015 /27-0016 /27-0017 /27-0018 /27-0019 /27-0020 /27-0021 /27-0022 /27-0023 /27-0026 /28-0001 /28-0002 /28-0003 51-311-313 51-353-081 51-311-314 51-351-604 51-444-043 51-353-424 51-444-044 51-444-045 51-311-358 51-444-046 51-444-047 51-351-625 51-311-359 51-444-048 51-311-360 51-351-626 51-320-013 51-320-014 51-323-313 51-321-312 51-320-015 51-320-016 51-323-314 51-320-017 51-320-018 51-321-313 51-323-003 51-323-004 51-321-314 51-322-009 51-322-010 51-321-606 51-321-607 51-321-608 51-320-019 51-320-020 51-323-315 51-321-315 51-321-609 54-310-040 51-712-014 51-712-028 Superseded by /61-0014 51-712-060 51-707-006 51-707-007 51-322-016 51-322-017 51-311-327 51-321-328 51-321-329 51-321-330 51-353-207 51-353-208 51-311-007 51-320-058 51-320-060 /28-0004 /33-0001 /33-0002 /34-0001 /34-0002 /34-0003 /34-0004 /34-0005 /34-0006 /34-0007 /34-0008 /34-0010 /34-0011 /34-0013 SPECTRUM CONTROL INC. * 8031 Avonia Rd. * Fairview, PA 16415 * Phone: 814-474-2207 * Fax: 814-474-2208 * Web site: www.spectrumcontrol.com SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 Appendix MIL-F-15733 244 *1566 PRINTER 171-241 v2 12/4/06 9:44 AM Page 73 Military Cross Reference Qualified Components Appendix MIL-F-15733 (cont'd) 245 MIL-F-28861 Military Designation MIL-F-15733 Spectrum Part Number Military Designation MIL-F-15733 Spectrum Part Number Military Designation MIL-F-28861 Spectrum Part Number /34-0014 /34-0015 /34-0016 /34-0017 /34-0018 /34-0020 /34-0021 /34-0029 /34-0030 /34-0031 /34-0035 /34-0036 /34-0037 /38-0001 /38-0002 /38-0003 /38-0004 /38-0005 /38-0006 /38-0008 /39-0001 /39-0002 /39-0003 /39-0004 /39-0005 /39-0006 39-0007 /39-0008 /39-0009 /39-0010 /39-0011 /39-0012 /39-0013 /39-0014 /39-0015 /39-0016 /39-0017 /39-0018 /40-0001 /43-0001 /43-0002 /44-0001 /44-0002 /44-0003 /46-0001 /48-0001 /48-0002 /48-0003 /48-0005 /49-0001 /49-0003 /49-0004 /49-0006 /49-0007 /49-0008 /49-0010 /51-0001 /51-0002 51-311-340 51-444-005 51-444-105 51-444-016 51-444-106 51-320-061 51-320-062 51-320-063 51-444-027 51-321-391 54-370-030 54-370-033 54-310-039 51-343-018 51-343-028 51-353-422 51-359-021 51-359-024 51-343-034 51-359-050 51-353-148 51-353-149 51-353-150 51-353-151 51-353-152 51-353-153 51-353-154 51-353-155 51-353-156 51-353-157 51-353-344 51-353-345 51-353-223 51-353-287 51-353-418 51-311-346 51-311-347 51-311-348 51-704-002 51-719-023 51-712-055 51-744-003 51-762-005 51-762-006 51-709-004 51-385-038 51-385-040 51-385-049 51-385-050 51-359-053 51-359-034 51-359-035 51-359-044 51-359-055 54-370-032 54-370-034 51-703-007 51-750-313 /54-0001 /54-0002 /54-0003 /54-0004 /54-0005 /54-0006 51-311-404 51-311-405 51-311-406 51-311-407 51-311-408 51-311-409 /54-0008 /54-0009 /54-0010 /54-0011 /54-0012 /54-0013 /54-0014 /54-0015 /54-0016 /54-0017 /54-0018 /54-0019 /56-0001 /57-0001 /58-0001 /58-0002 /58-0003 /58-0004 /61-0001 /61-0002 /61-0003 /61-0004 /61-0005 /61-0006 /61-0007 /61-0008 /61-0009 /61-0010 /61-0011 /61-0012 /61-0013 /61-0014 /62-0001 /62-0002 /62-0003 /62-0004 /63-0001 /66-0001 /67-0001 /67-0002 /67-0003 /67-0004 /67-0005 /67-0006 /67-0007 /67-0008 /67-0009 /67-0010 /67-0011 /67-0012 51-311-411 51-311-412 51-311-413 51-311-414 51-311-415 51-311-416 51-311-417 51-444-115 51-444-116 51-321-670 51-444-117 51-444-118 51-444-800 51-359-041 51-359-051 51-444-072 54-367-069 51-359-105 51-719-053 51-719-054 51-702-020 51-702-021 51-714-051 51-714-052 51-714-053 51-712-063 51-709-015 51-714-054 51-714-055 51-714-056 51-712-067 51-712-065 51-703-012 51-713-010 51-703-013 51-750-309 52-304-014 51-707-026 51-320-170 51-320-171 51-320-172 51-320-173 51-320-174 51-320-175 51-320-176 51-320-177 51-321-402 51-321-404 51-321-405 51-321-403 /1-001 /1-002 /1-003 /1-004 /1-005 /1-006 /1-007 /1-008 /1-009 /1-010 /1-011 /1-012 /1-013 /1-014 /1-015 /1-016 /1-017 /1-018 /1-019 /1-020 /1-021 /1-022 /1-023 /1-024 /1-025 /1-026 /1-031 /1-032 /1-033 /1-034 /1-035 /1-036 /2-001 /2-002 /2-003 /2-004 /2-005 /2-006 /2-007 /2-008 /2-009 /2-010 /2-011 /2-012 /2-013 /2-014 /2-015 /2-016 /2-017 /2-018 /2-019 /2-020 /2-021 /2-022 /2-023 /2-024 /3-001 /3-002 51-359-081 54-367-049 51-359-082 54-367-050 51-359-083 54-367-051 51-359-084 54-367-052 51-359-085 54-367-053 51-359-086 54-367-054 51-359-087 54-367-055 51-359-088 54-367-056 51-359-089 54-367-057 51-359-090 54-367-058 51-359-122 54-367-085 51-359-123 54-367-086 51-359-124 54-367-087 51-359-125 54-367-088 51-359-126 54-367-089 51-359-127 54-367-090 51-311-010 51-311-011 51-311-365 51-311-012 51-311-013 51-311-366 51-311-014 51-311-015 51-311-367 51-311-016 51-311-017 51-311-368 51-311-018 51-311-019 51-311-369 51-311-020 51-311-021 51-311-370 51-311-022 51-311-023 51-311-371 51-311-024 51-311-025 51-311-372 51-390-044 51-390-045 SPECTRUM CONTROL INC. * 8031 Avonia Rd. * Fairview, PA 16415 * Phone: 814-474-2207 * Fax: 814-474-2208 * Web site: www.spectrumcontrol.com SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 *1566 PRINTER 171-241 v2 12/4/06 9:45 AM Page 74 Military Cross Reference Qualified Components Military Designation MIL-F-28861 Spectrum Part Number /3-003 /3-004 /3-005 /3-006 /3-007 /3-008 /3-009 /3-010 /3-011 /3-012 /3-013 /3-014 /3-015 /3-016 /3-017 /3-018 /3-019 /3-020 /3-021 /3-022 /3-023 /3-024 /3-025 /3-026 /3-027 /3-028 /3-029 /3-030 /3-031 /3-032 /3-033 /3-034 /3-035 /3-036 /5-001 /5-002 /5-003 /5-004 /5-005 /5-006 /5-007 /5-008 /5-009 /5-010 /5-011 /5-012 /5-013 /5-014 /5-015 /5-016 /5-017 /5-018 /5-019 /5-020 /5-021 /5-022 /5-023 /5-024 51-390-321 51-390-046 51-390-047 51-390-322 51-390-048 51-390-049 51-390-323 51-390-050 51-390-051 51-390-324 51-390-052 51-390-053 51-390-325 51-390-054 51-390-055 51-390-326 51-390-056 51-390-057 51-390-327 51-390-058 51-390-059 51-390-328 51-390-060 51-390-061 51-390-329 51-390-062 51-390-063 51-390-330 51-390-064 51-390-065 51-390-331 51-390-066 51-390-067 51-390-332 51-311-026 51-311-027 51-311-374 51-311-028 51-311-029 51-311-375 51-311-030 51-311-031 51-311-376 51-311-032 51-311-033 51-311-377 51-311-034 51-311-035 51-311-378 51-311-036 51-311-037 51-311-379 51-311-038 51-311-039 51-311-380 51-311-040 51-311-041 51-311-381 DSCC 84084 Product DSCC Designation Spectrum Part Number 84084-001 84084-004 84084-005 84084-006 84084-007 84084-008 84084-009 84084-010 84084-011 84084-013 84084-014 84084-015 84084-016 54-310-042 51-320-162 51-320-163 51-320-164 51-320-165 51-320-166 51-320-167 51-320-168 51-320-169 51-321-398 51-321-399 51-321-400 51-321-401 MIL-C-11015 /32 CK# Spectrum Part Number CK99BW502M CK99BW272M CK99BW101M CK99BW501M CK99BW122M SCI-9900-502AP SCI-9910-272AQ SCI-9920-101T SCI-9920-501K SCI-9920-122J SPECTRUM CONTROL INC. * 8031 Avonia Rd. * Fairview, PA 16415 * Phone: 814-474-2207 * Fax: 814-474-2208 * Web site: www.spectrumcontrol.com SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 Appendix MIL-F-28861 (cont'd) 246 *1566 PRINTER 171-241 v2 12/4/06 9:45 AM Page 75 Appendix Spectrum Control/AMP Part Number Cross Reference AMP Part Number Spectrum Part Number AMP Part Number Spectrum Part Number AMP Part Number Spectrum Part Number 1124033-1 1124034-1 1124082-1 1124174-1 1124175-1 1-842900-3 1-842900-0 1-842900-1 1-842900-2 1-842900-4 1-842901-3 1-842901-0 1-842901-1 1-842901-2 1-842901-4 1-842902-3 1-842902-0 1-842902-1 1-842902-2 1-842902-4 1-842903-3 1-842903-0 1-842903-1 1-842903-2 1-842903-4 1-842904-3 1-842904-0 1-842904-1 1-842904-2 1-842904-4 1-842905-3 1-842905-0 1-842905-1 1-842905-2 1-842905-7 1-842905-4 1-842906-3 1-842906-0 1-842906-1 1-842906-2 1-842906-4 1-842907-3 1-842907-0 1-842907-1 1-842907-2 1-842907-4 1-842908-3 1-842908-0 1-842908-1 1-842908-2 1-842908-4 1-842909-3 1-842909-0 1-842909-1 1-842909-2 1-842909-4 1-842910-3 1-842910-0 1-842910-1 1-842910-2 1-842910-4 56-407-001 56-403-001 56-614-001 56-413-001 56-423-001 56-702-001-LI 56-702-005-LI 56-702-008-LI 56-702-008-LI 56-702-XXX-LI** 56-712-001-LI 56-712-005-LI 56-712-008-LI 56-712-008-LI 56-712-XXX-LI** 56-722-001-LI 56-722-005-LI 56-722-009-LI 56-722-009-LI 56-722-XXX-LI** 56-732-001-LI 56-732-005-LI 56-732-007-LI 56-732-007-LI 56-732-XXX-LI** 56-742-001-LI 56-742-005-LI 56-742-007-LI 56-742-007-LI 56-742-XXX-LI** 56-704-001-LI 56-704-005-LI 56-704-008-LI 56-704-008-LI 56-704-XXX** 56-704-XXX-LI** 56-714-001-LI 56-714-005-LI 56-714-007-LI 56-714-007-LI 56-714-XXX-LI** 56-724-001-LI 56-724-005-LI 56-724-009-LI 56-724-009-LI 56-724-XXX-LI** 56-734-001-LI 56-734-005-LI 56-734-007-LI 56-734-007-LI 56-734-XXX-LI** 56-744-001-LI 56-744-005-LI 56-744-007-LI 56-744-007-LI 56-744-XXX-LI** 56-701-001-LI 56-701-005-LI 56-701-029-LI 56-701-029-LI 56-701-XXX-LI** 1-842911-3 1-842911-0 1-842911-1 1-842911-2 1-842911-4 1-842912-3 1-842912-0 1-842912-1 1-842912-2 1-842912-4 1-842913-3 1-842913-0 1-842913-1 1-842913-2 1-842913-4 1-842914-3 1-842914-0 1-842914-1 1-842914-2 1-842914-4 1-842915-3 1-842915-0 1-842915-1 1-842915-2 1-842915-4 1-842916-3 1-842916-0 1-842916-1 1-842916-2 1-842916-4 1-842917-3 1-842917-0 1-842917-1 1-842917-2 1-842917-4 1-842918-3 1-842918-0 1-842918-1 1-842918-2 1-842918-4 1-842919-3 1-842919-0 1-842919-1 1-842919-2 1-842919-4 1-842920-3 1-842920-0 1-842920-1 1-842920-2 1-842920-4 1-842921-3 1-842921-0 1-842921-1 1-842921-2 1-842921-4 1-842922-3 1-842922-0 1-842922-1 1-842922-2 1-842922-4 1-842923-3 56-711-001-LI 56-711-005-LI 56-711-029-LI 56-711-029-LI 56-711-XXX-LI** 56-721-001-LI 56-721-005-LI 56-721-034-LI 56-721-034-LI 56-721-XXX-LI** 56-731-001-LI 56-731-005-LI 56-731-029-LI 56-731-029-LI 56-731-XXX-LI** 56-741-001-LI 56-741-005-LI 56-741-028-LI 56-741-028-LI 56-741-XXX-LI** 56-703-001-LI 56-703-005-LI 56-703-023-LI 56-703-023-LI 56-703-XXX-LI** 56-713-001-LI 56-713-005-LI 56-713-022-LI 56-713-022-LI 56-713-XXX-LI** 56-723-001-LI 56-723-005-LI 56-723-024-LI 56-723-024-LI 56-723-XXX-LI** 56-733-001-LI 56-733-005-LI 56-733-022-LI 56-733-022-LI 56-733-XXX-LI** 56-743-001-LI 56-743-005-LI 56-743-022-LI 56-743-022-LI 56-743-XXX-LI** 56-701-011-LI 56-701-015-LI 56-701-041-LI 56-701-041-LI 56-701-XXX-LI** 56-711-011-LI 56-711-015-LI 56-711-041-LI 56-711-041-LI 56-711-XXX-LI** 56-721-011-LI 56-721-015-LI 56-721-046-LI 56-721-046-LI 56-721-XXX-LI** 56-731-011-LI 1-842923-0 1-842923-1 1-842923-2 1-842923-4 1-842924-3 1-842924-0 1-842924-1 1-842924-2 1-842924-4 1-842925-3 1-842925-0 1-842925-1 1-842925-2 1-842925-8 1-842925-4 1-842926-3 1-842926-0 1-842926-1 1-842926-2 1-842926-4 1-842927-3 1-842927-0 1-842927-1 1-842927-2 1-842927-4 1-842928-3 1-842928-0 1-842928-1 1-842928-2 1-842928-6 1-842928-7 1-842928-4 1-842929-3 1-842929-0 1-842929-1 1-842929-2 1-842929-4 1-842930-3 1-842930-0 1-842930-1 1-842930-2 1-842930-4 1-842931-3 1-842931-0 1-842931-1 1-842931-2 1-842931-4 1-842932-3 1-842932-0 1-842932-1 1-842932-2 1-842932-4 1-842933-3 1-842933-0 1-842933-1 1-842933-2 1-842933-4 1-842934-3 1-842934-0 1-842934-1 1-842934-2 56-731-015-LI 56-731-041-LI 56-731-041-LI 56-731-XXX-LI** 56-741-011-LI 56-741-015-LI 56-741-040-LI 56-741-040-LI 56-741-XXX-LI** 56-706-001-LI 56-706-005-LI 56-706-007-LI 56-706-007-LI 56-706-XXX** 56-706-XXX-LI** 56-716-001-LI 56-716-005-LI 56-716-007-LI 56-716-007-LI 56-716-XXX-LI** 56-726-001-LI 56-726-005-LI 56-726-007-LI 56-726-007-LI 56-726-XXX-LI** 56-736-001-LI 56-736-005-LI 56-736-007-LI 56-736-007-LI 56-736-XXX** 56-736-XXX** 56-736-XXX-LI** 56-746-001-LI 56-746-005-LI 56-746-007-LI 56-746-007-LI 56-746-XXX-LI** 56-705-001-LI 56-705-005-LI 56-705-009-LI 56-705-009-LI 56-705-XXX-LI** 56-715-001-LI 56-715-005-LI 56-715-008-LI 56-715-008-LI 56-715-XXX-LI** 56-725-001-LI 56-725-005-LI 56-725-020-LI 56-725-020-LI 56-725-XXX-LI** 56-735-001-LI 56-735-005-LI 56-735-009-LI 56-735-009-LI 56-735-XXX-LI** 56-745-001-LI 56-745-005-LI 56-745-007-LI 56-745-007-LI * There may be mechanical and/or electrical differences between the Amp and Spectrum part. Please consult factory. ** A standard part number does not currently exist but will be assigned upon ordering. 247 SPECTRUM CONTROL INC. * 8031 Avonia Rd. * Fairview, PA 16415 * Phone: 814-474-2207 * Fax: 814-474-2208 * Web site: www.spectrumcontrol.com SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 *1566 PRINTER 242-244 v2 12/4/06 9:56 AM Page 1 AMP Part Number Spectrum Part Number AMP Part Number Spectrum Part Number AMP Part Number Spectrum Part Number 1-842934-4 1-869464-0 1-869470-0 1-869476-0 1-869522-0 1-869523-0 1-869527-0 1-93768-0 1-93769-0 1-93770-0 1-93771-0 1-93772-0 1-93773-0 1-93774-0 1-93775-0 267028-1 56-745-XXX-LI** 56-124-002 56-102-002 56-122-002 56-104-002 56-114-002 56-112-002 56-701-081-LI 56-711-085-LI 56-721-070-LI 56-731-060-LI 56-706-009-LI 56-716-009-LI 56-726-009-LI 56-736-009-LI 56-B12-000-K 56-B12-000-S 56-C31-001 56-407-001 56-423-001 56-724-008-GBL 56-624-XXX** 56-413-001 56-B22-000-S 56-B22-000-K 56-B42-000-S 56-B42-000-K 56-703-022 56-713-021 56-723-022 56-102-006 56-102-005 56-102-004 56-102-003 56-102-002 56-112-006 56-112-005 56-112-004 56-112-003 56-112-002 56-122-006 56-122-005 56-122-004 56-122-003 56-122-002 56-104-006 56-104-005 56-104-004 56-104-003 56-104-002 56-114-006 56-114-005 56-114-004 56-114-003 56-114-002 56-124-006 56-124-005 56-124-004 56-124-003 56-124-002 56-102-006 267980-2 267980-3 267980-4 267980-5 267981-1 267981-2 267981-3 267981-4 267981-5 267982-1 267982-2 267982-3 267982-4 267982-5 267983-1 267983-2 267983-3 267983-4 267983-5 267984-1 267984-2 267984-3 267984-4 267984-5 267985-1 267985-2 267985-3 267985-4 267985-5 2-842919-6 2-842920-2 2-842927-2 3-842917-1 3-842917-2 3-842917-3 842582-3 842582-4 842583-3 842583-4 842584-3 842584-4 842585-3 842585-4 842586-3 842586-4 842587-3 842587-4 842588-3 842588-4 842589-3 842589-4 842590-3 842590-4 842591-3 842591-4 842592-3 842592-4 842593-3 842593-4 842594-3 842594-4 56-102-005 56-102-004 56-102-003 56-102-002 56-112-006 56-112-005 56-112-004 56-112-003 56-112-002 56-122-006 56-122-005 56-122-004 56-122-003 56-122-002 56-104-006 56-104-005 56-104-004 56-104-003 56-104-002 56-114-006 56-114-005 56-114-004 56-114-003 56-114-002 56-124-006 56-124-005 56-124-004 56-124-003 56-124-002 56-743-003-LI 56-701-042 56-726-XXX** 56-723-045-LI 56-723-XXX** 56-723-XXX** 56-701-047 56-701-047-LI 56-711-048 56-711-048-LI 56-721-063 56-721-063-LI 56-731-048 56-731-048-LI 56-703-036 56-703-036-LI 56-713-037 56-713-037-LI 56-723-045 56-723-045-LI 56-733-035 56-733-035-LI 56-702-013 56-702-013-LI 56-712-017 56-712-017-LI 56-722-027 56-722-027-LI 56-732-009 56-732-009-LI 56-704-018 56-704-018-LI 842595-3 842595-4 842596-3 842596-4 842597-3 842597-4 842610-3 842610-4 842611-3 842611-4 842612-3 842612-4 842613-3 842613-4 842614-3 842614-4 842615-3 842615-4 842616-3 842616-4 842617-3 842617-4 842618-3 842618-4 842619-3 842619-4 842620-3 842620-4 842621-3 842621-4 842622-3 842622-4 842623-3 842623-4 842624-3 842624-4 842625-3 842625-4 842638-3 842638-4 842639-3 842639-4 842640-3 842640-4 842641-3 842641-4 842642-3 842642-4 842643-3 842643-4 842644-3 842644-4 842645-3 842645-4 842646-3 842646-4 842647-3 842647-4 842648-3 842648-4 842649-3 56-714-017 56-714-017-LI 56-724-021 56-724-021-LI 56-734-012 56-734-012-LI 56-701-086 56-701-086-LI 56-711-088 56-711-088-LI 56-721-111 56-721-111-LI 56-731-076 56-731-076-LI 56-703-047 56-703-047-LI 56-713-045 56-713-045-LI 56-723-069 56-723-069-LI 56-733-046 56-733-046-LI 56-702-033 56-702-033-LI 56-712-039 56-712-039-LI 56-722-060 56-722-060-LI 56-732-023-LI 56-732-023-LI 56-704-035 56-704-035-LI 56-714-031 56-714-031-LI 56-724-046 56-724-046-LI 56-734-021 56-734-021-LI 56-701-028 56-701-028-LI 56-711-028 56-711-028-LI 56-721-033 56-721-033-LI 56-731-028 56-731-028-LI 56-703-022 56-703-022-LI 56-713-021 56-713-021-LI 56-723-023 56-723-023-LI 56-733-021 56-733-021-LI 56-702-007 56-702-007-LI 56-712-007 56-712-007-LI 56-722-008 56-722-008-LI 56-732-006 267100-1 267116-1 267161-2 267290-1 267292-1 267397-1 267533-1 267533-2 267534-1 267534-2 267809-1 267810-1 267811-1 267824-1 267824-2 267824-3 267824-4 267824-5 267825-1 267825-2 267825-3 267825-4 267825-5 267826-1 267826-2 267826-3 267826-4 267826-5 267827-1 267827-2 267827-3 267827-4 267827-5 267828-1 267828-2 267828-3 267828-4 267828-5 267829-1 267829-2 267829-3 267829-4 267829-5 267980-1 Appendix Spectrum Control/AMP Part Number Cross Reference * There may be mechanical and/or electrical differences between the Amp and Spectrum part. Please consult factory. ** A standard part number does not currently exist but will be assigned upon ordering. SPECTRUM CONTROL INC. * 8031 Avonia Rd. * Fairview, PA 16415 * Phone: 814-474-2207 * Fax: 814-474-2208 * Web site: www.spectrumcontrol.com SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 248 *1566 PRINTER 242-244 v2 12/4/06 9:56 AM Page 2 Appendix Spectrum Control/AMP Part Number Cross Reference AMP Part Number Spectrum Part Number AMP Part Number Spectrum Part Number AMP Part Number Spectrum Part Number 842649-4 842650-3 842650-4 842651-3 842651-4 842652-3 842652-4 842653-3 842653-4 842666-3 842666-4 842667-3 842667-4 842668-3 842668-4 842669-3 842669-4 842670-3 842670-4 842671-3 842671-4 842672-3 842672-4 842673-3 842673-4 842674-3 842674-4 842675-3 842675-4 842675-5 842676-3 842676-4 842677-3 842677-4 842678-3 842678-4 842679-3 842679-4 842680-3 842680-4 842681-3 842681-4 842697-3 842697-4 842697-5 842697-5 842698-3 842698-4 842699-3 842699-4 842699-4 842700-3 842700-4 842737-3 842737-4 842738-3 842738-4 842738-5 842739-3 842739-4 842740-3 56-732-006-LI 56-704-007 56-704-007-LI 56-714-006 56-714-006-LI 56-724-008 56-724-008-LI 56-734-006 56-734-006-LI 56-701-002 56-701-002-LI 56-711-002 56-711-002-LI 56-721-002 56-721-002-LI 56-731-002 56-731-002-LI 56-703-002 56-703-002-LI 56-713-002 56-713-002-LI 56-723-002 56-723-002-LI 56-733-002 56-733-002-LI 56-702-002 56-702-002-LI 56-712-002 56-712-002-LI 56-712-002-LIM 56-722-002 56-722-002-LI 56-732-002 56-732-002-LI 56-704-002 56-704-002-LI 56-714-002 56-714-002-LI 56-724-002 56-724-002-LI 56-734-002 56-734-002-LI 56-705-008 56-705-008-LI 56-705-026-LI 56-705-XXX** 56-715-007 56-715-007-LI 56-725-019 56-725-019-LI 56-725-019-LI 56-735-008 56-735-008-LI 56-705-002 56-705-002-LI 56-705-026 56-705-026-LI 56-705-026-HV 56-705-049 56-705-049-LI 56-715-002 842740-4 842741-3 842741-4 842742-3 842742-4 842743-3 842743-4 842744-3 842744-4 842744-5 842745-3 842745-4 842746-3 842746-4 842747-3 842747-4 842748-3 842748-4 842796-2 842797-2 842830-3 842900-1 842900-2 842900-3 842900-4 842900-5 842900-6 842900-7 842900-8 842900-9 842901-1 842901-2 842901-3 842901-4 842901-5 842901-6 842901-7 842901-8 842901-9 842902-1 842902-2 842902-3 842902-4 842902-5 842902-6 842902-7 842902-8 842902-9 842903-1 842903-2 842903-3 842903-4 842903-5 842903-6 842903-7 842903-8 842903-9 842904-1 842904-2 842904-3 842904-4 56-715-002-LI 56-715-015 56-715-015-LI 56-715-040 56-715-040-LI 56-725-002 56-725-002-LI 56-725-064 56-725-064-LI 56-725-XXX** 56-725-073 56-725-073-LI 56-735-002 56-735-002-LI 56-735-025 56-735-025-LI 56-735-034 56-735-034-LI 56-725-064-HV 56-735-025-HV 56-706-006 56-702-003 56-702-009 56-702-005 56-702-008 56-702-008 56-702-001 56-702-XXX** 56-702-003-LI 56-702-009-LI 56-712-003 56-712-009 56-712-005 56-712-008 56-712-008 56-712-001 56-712-XXX** 56-712-003-LI 56-712-009-LI 56-722-003 56-722-010 56-722-005 56-722-009 56-722-009 56-722-001 56-722-XXX** 56-722-003-LI 56-722-010-LI 56-732-003 56-732-008 56-732-005 56-732-007 56-732-007 56-732-001 56-732-XXX** 56-732-003-LI 56-732-008-LI 56-742-003 56-742-008 56-742-005 56-742-007 842904-5 842904-6 842904-7 842904-8 842904-9 842905-1 842905-2 842905-3 842905-4 842905-5 842905-6 842905-7 842905-8 842905-9 842906-1 842906-2 842906-3 842906-4 842906-5 842906-6 842906-7 842906-8 842906-9 842907-1 842907-2 842907-3 842907-4 842907-5 842907-6 842907-7 842907-8 842907-9 842908-1 842908-2 842908-3 842908-4 842908-5 842908-6 842908-7 842908-8 842908-9 842909-1 842909-2 842909-3 842909-4 842909-5 842909-6 842909-7 842909-8 842909-9 842910-1 842910-2 842910-3 842910-4 842910-5 842910-6 842910-7 842910-8 842910-9 842911-1 842911-2 56-742-007 56-742-001 56-742-XXX** 56-742-003-LI 56-742-008-LI 56-704-003 56-704-009 56-704-005 56-704-008 56-704-008 56-704-001 56-704-XXX** 56-704-003-LI 56-704-009-LI 56-714-003 56-714-008 56-714-005 56-714-007 56-714-007 56-714-001 56-714-XXX** 56-714-003-LI 56-714-008-LI 56-724-003 56-724-010 56-724-005 56-724-009 56-724-009 56-724-001 56-724-XXX** 56-724-003-LI 56-724-010-LI 56-734-003 56-734-008 56-734-005 56-734-007 56-734-007 56-734-001 56-734-XXX** 56-734-003-LI 56-734-008-LI 56-744-003 56-744-008 56-744-005 56-744-007 56-744-007 56-744-001 56-744-XXX** 56-744-003-LI 56-744-008-LI 56-701-003 56-701-030 56-701-005 56-701-029 56-701-029 56-701-001 56-701-XXX** 56-701-003-LI 56-701-030-LI 56-711-003 56-711-030 * There may be mechanical and/or electrical differences between the Amp and Spectrum part. Please consult factory. ** A standard part number does not currently exist but will be assigned upon ordering. 249 SPECTRUM CONTROL INC. * 8031 Avonia Rd. * Fairview, PA 16415 * Phone: 814-474-2207 * Fax: 814-474-2208 * Web site: www.spectrumcontrol.com SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 *1566 PRINTER 242-244 v2 12/4/06 9:56 AM Page 3 AMP Part Number Spectrum Part Number AMP Part Number Spectrum Part Number AMP Part Number Spectrum Part Number 842911-3 842911-4 842911-5 842911-6 842911-7 842911-8 842911-9 842912-1 842912-2 842912-3 842912-4 842912-5 842912-6 842912-7 842912-8 842912-9 842913-1 842913-2 842913-3 842913-4 842913-5 842913-6 842913-7 842913-8 842913-9 842914-1 842914-2 842914-3 842914-4 842914-5 842914-6 842914-7 842914-8 842914-9 842915-1 842915-2 842915-3 842915-4 842915-5 842915-6 842915-7 842915-8 842915-9 842916-1 842916-2 842916-3 842916-4 842916-5 842916-6 842916-7 842916-8 842916-9 842917-1 842917-2 842917-3 842917-4 842917-5 842917-6 842917-7 842917-8 842917-9 56-711-005 56-711-029 56-711-029 56-711-001 56-711-XXX** 56-711-003-LI 56-711-030-LI 56-721-003 56-721-035 56-721-005 56-721-034 56-721-034 56-721-001 56-721-XXX** 56-721-003-LI 56-721-035-LI 56-731-003 56-731-030 56-731-005 56-731-029 56-731-029 56-731-001 56-731-XXX** 56-731-003-LI 56-731-030-LI 56-741-003 56-741-029 56-741-005 56-741-028 56-741-028 56-741-001 56-741-XXX** 56-741-003-LI 56-741-029-LI 56-703-003 56-703-024 56-703-005 56-703-023 56-703-023 56-703-001 56-703-XXX** 56-703-003-LI 56-703-024-LI 56-713-003 56-713-023 56-713-005 56-713-022 56-713-022 56-713-001 56-713-XXX** 56-713-003-LI 56-713-023-LI 56-723-003 56-723-025 56-723-005 56-723-024 56-723-024 56-723-001 56-723-XXX** 56-723-003-LI 56-723-025-LI 842918-1 842918-2 842918-3 842918-4 842918-5 842918-6 842918-7 842918-8 842918-9 842919-1 842919-2 842919-3 842919-4 842919-5 842919-6 842919-7 842919-8 842919-9 842920-1 842920-2 842920-3 842920-4 842920-5 842920-6 842920-7 842920-8 842920-9 842921-1 842921-2 842921-3 842921-4 842921-5 842921-6 842921-7 842921-8 842921-9 842922-1 842922-2 842922-3 842922-4 842922-5 842922-6 842922-7 842922-8 842922-9 842923-1 842923-2 842923-3 842923-4 842923-5 842923-6 842923-7 842923-8 842923-9 842924-1 842924-2 842924-3 842924-4 842924-5 842924-6 842924-7 56-733-003 56-733-023 56-733-005 56-733-022 56-733-022 56-733-001 56-733-XXX** 56-733-003-LI 56-733-023-LI 56-743-003 56-743-023 56-743-005 56-743-022 56-743-022 56-743-001 56-743-XXX** 56-743-003-LI 56-743-023-LI 56-701-013 56-701-042 56-701-015 56-701-041 56-701-041 56-701-011 56-701-XXX** 56-701-013-LI 56-701-042-LI 56-711-013 56-711-042 56-711-015 56-711-041 56-711-041 56-711-011 56-711-XXX** 56-711-013-LI 56-711-042-LI 56-721-013 56-721-047 56-721-015 56-721-046 56-721-046 56-721-011 56-721-XXX** 56-721-013-LI 56-721-047-LI 56-731-013 56-731-042 56-731-015 56-731-041 56-731-041 56-731-011 56-731-XXX** 56-731-013-LI 56-731-042-LI 56-741-013 56-741-041 56-741-015 56-741-040 56-741-040 56-741-011 56-741-XXX** 842924-8 842924-9 842925-1 842925-2 842925-3 842925-4 842925-5 842925-6 842925-7 842925-8 842925-9 842926-1 842926-2 842926-3 842926-4 842926-5 842926-6 842926-7 842926-8 842926-9 842927-1 842927-2 842927-3 842927-4 842927-5 842927-6 842927-7 842927-8 842927-9 842928-1 842928-2 842928-3 842928-4 842928-5 842928-6 842928-7 842928-8 842928-9 842929-1 842929-2 842929-3 842929-4 842929-5 842929-6 842929-7 842929-8 842929-9 842930-1 842930-2 842930-3 842930-4 842930-5 842930-6 842930-7 842930-8 842930-9 842931-1 842931-2 842931-3 842931-4 842931-5 56-741-013-LI 56-741-041-LI 56-706-003 56-706-008 56-706-005 56-706-007 56-706-007 56-706-001 56-706-XXX** 56-706-003-LI 56-706-005-LI 56-716-003 56-716-008 56-716-005 56-716-007 56-716-007 56-716-001 56-716-XXX** 56-716-003-LI 56-716-008-LI 56-726-003 56-726-008 56-726-005 56-726-007 56-726-007 56-726-001 56-726-XXX** 56-726-003-LI 56-726-008-LI 56-736-003 56-736-008 56-736-005 56-736-007 56-736-007 56-736-001 56-736-XXX** 56-736-003-LI 56-736-008-LI 56-746-003 56-746-008 56-746-005 56-746-007 56-746-007 56-746-001 56-746-XXX** 56-746-003-LI 56-746-008-LI 56-705-003 56-705-010 56-705-005 56-705-009 56-705-009 56-705-001 56-705-XXX** 56-705-003-LI 56-705-010-LI 56-715-003 56-715-009 56-715-005 56-715-008 56-715-008 Appendix Spectrum Control/AMP Part Number Cross Reference * There may be mechanical and/or electrical differences between the Amp and Spectrum part. Please consult factory. ** A standard part number does not currently exist but will be assigned upon ordering. SPECTRUM CONTROL INC. * 8031 Avonia Rd. * Fairview, PA 16415 * Phone: 814-474-2207 * Fax: 814-474-2208 * Web site: www.spectrumcontrol.com SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 250 *1566 PRINTER 242-244 v2 12/4/06 9:56 AM Page 4 Spectrum Control/AMP Part Number Cross Reference Appendix AMP Part Number 251 Spectrum Part Number AMP Part Number Spectrum Part Number 842931-6 56-715-001 842953-2 56-734-004-LI 842931-7 56-715-XXX** 842954-1 56-705-004 842931-8 56-715-003-LI 842954-2 56-705-004-LI 842931-9 56-715-009-LI 842955-1 56-715-004 842932-1 56-725-003 842955-2 56-715-004-LI 842932-2 56-725-021 842956-1 56-725-004 842932-3 56-725-005 842956-2 56-725-004-LI 842932-4 56-725-020 842956-3 56-725-004-LI 842932-5 56-725-020 842957-1 56-735-004 842932-6 56-725-001 842957-2 56-735-004-LI 842932-7 56-725-XXX** 842957-3 56-735-004-LI 842932-8 56-725-003-LI 859762-1 56-726-003 842932-9 56-725-021-LI 869202-1 56-715-004 842933-1 56-735-003 869214-1 56-701-003-LIM 842933-2 56-735-010 869248-1 56-711-003-LIM 842933-3 56-735-005 869408-1 56-715-XXX** 842933-4 56-735-009 869427-2 56-414-001-HD 842933-5 56-735-009 869436-2 56-402-001 842933-6 56-735-001 869442-2 56-422-001 842933-7 56-735-XXX** 869454-1 56-704-007-LI 842933-8 56-735-003-LI 869464-5 56-124-006 842933-9 56-735-010-LI 869464-6 56-124-005 842934-1 56-745-003 869464-7 56-124-004 842934-2 56-745-008 869464-8 56-124-003 842934-3 56-745-005 869470-5 56-102-006 842934-4 56-745-007 869470-6 56-102-005 842934-5 56-745-007 869470-7 56-102-004 842934-6 56-745-001 869470-8 56-102-003 842934-7 56-745-XXX** 869476-5 56-122-006 842934-8 56-745-003-LI 869476-6 56-122-005 842934-9 56-745-008-LI 869476-7 56-122-004 842938-1 56-701-004 869476-8 56-122-003 842938-2 56-701-004-LI 869504-1 & 2 56-B32-000-S 842939-1 56-711-004 869505-1 56-B52-000-S 842939-2 56-711-004-LI 869508-1 & 2 56-B32-000-K 842940-1 56-721-004 869509-1 56-B52-000-K 842940-2 56-721-004-LI 869520-2 56-404-001 842941-1 56-731-004 869521-2 56-424-001 842941-2 56-731-004-LI 869522-5 56-104-006 842942-1 56-703-004 869522-6 56-104-005 842942-2 56-703-004-LI 869522-7 56-104-004 842943-1 56-713-004 869522-8 56-104-003 842943-2 56-713-004-LI 869523-5 56-114-006 842944-1 56-723-004 869523-6 56-114-005 842944-2 56-723-004-LI 869523-7 56-114-004 842945-1 56-733-004 869523-8 56-114-003 842945-2 56-733-004-LI 869526-2 56-412-001 842946-1 56-702-004 869527-5 56-112-006 842946-2 56-702-004-LI 869527-6 56-112-005 842947-1 56-712-004 869527-7 56-112-004 842947-2 56-712-004-LI 869527-8 56-112-003 842948-1 56-722-004 93544-3 56-C31-201-SOX 842948-2 56-722-004-LI 93725-1 56-C33-001 842949-1 56-732-004 93768-1 56-701-014 842949-2 56-732-004-LI 93768-2 56-701-012 842950-1 56-704-004 93768-3 56-701-040 842950-2 56-704-004-LI 93768-4 56-701-087 842951-1 56-714-004 93768-5 56-701-081 842951-2 56-714-004-LI 93768-6 56-701-014-LI 842952-1 56-724-004 93768-7 56-701-012-LI 842952-2 56-724-004-LI 93768-8 56-701-040-LI 842953-1 56-734-004 93768-9 56-701-087-LI * There may be mechanical and/or electrical differences between the Amp and Spectrum part. Please consult factory. ** A standard part number does not currently exist but will be assigned upon ordering. AMP Part Number Spectrum Part Number 93769-1 93769-2 93769-3 93769-4 93769-5 93769-6 93769-7 93769-8 93769-9 93770-1 93770-2 93770-3 93770-4 93770-5 93770-6 93770-7 93770-8 93770-9 93771-1 93771-2 93771-3 93771-4 93771-5 93771-6 93771-7 93771-8 93771-9 93772-1 93772-2 93772-3 93772-4 93772-5 93772-6 93772-7 93772-8 93772-9 93773-1 93773-2 93773-3 93773-4 93773-5 93773-6 93773-7 93773-8 93773-9 93774-1 93774-2 93774-3 93774-4 93774-5 93774-6 93774-7 93774-8 93774-9 93775-1 93775-2 93775-3 93775-4 93775-5 93775-6 93775-7 93775-8 93775-9 56-711-014 56-711-012 56-711-040 56-711-086 56-711-085 56-711-014-LI 56-711-012-LI 56-711-040-LI 56-711-086-LI 56-721-014 56-721-012 56-721-045 56-721-112 56-721-070 56-721-014-LI 56-721-012-LI 56-721-045-LI 56-721-112-LI 56-731-014 56-731-012 56-731-040-LI 56-731-077 56-731-060 56-731-014-LI 56-731-012-LI 56-731-040-LI 56-731-077-LI 56-706-004 56-706-002 56-706-006 56-706-017 56-706-009 56-706-004-LI 56-706-002-LI 56-706-006-LI 56-706-017-LI 56-716-004 56-716-002 56-716-006 56-716-013 56-716-009 56-716-004-LI 56-716-002-LI 56-716-006-LI 56-716-013-LI 56-726-004 56-726-002 56-726-006 56-726-021 56-726-009 56-726-004-LI 56-726-002-LI 56-726-006-LI 56-726-021-LI 56-736-004 56-736-002 56-736-006 56-736-015 56-736-009 56-736-004-LI 56-736-002-LI 56-736-006-LI 56-736-015-LI SPECTRUM CONTROL INC. * 8031 Avonia Rd. * Fairview, PA 16415 * Phone: 814-474-2207 * Fax: 814-474-2208 * Web site: www.spectrumcontrol.com SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 *1566 PRINTER 245-250 v2 12/4/06 9:57 AM Page 1 Part Number Index Page 1201-052.......................................82 1201-054.......................................82 1201-066.......................................82 1201-086.......................................82 1202-005.......................................83 1202-052.......................................83 1202-054.......................................83 1203-050.......................................69 1204-050.......................................69 1214-001.......................................69 1214-007.......................................69 1214-029.......................................69 1216-001.......................................82 1221-001.......................................82 1223-012.......................................69 1233-000.......................................69 1234-000.......................................69 1234-001.......................................69 1250-003.......................................78 1250-049.......................................78 1250-054.......................................78 1250-059.......................................78 1250-062.......................................78 1251-001.......................................69 1270-009.......................................82 1270-016.......................................82 1270-024.......................................82 1270-025.......................................82 1280-060.......................................85 1289-001...................................... 76 1289-004.......................................76 1293-000.......................................78 1293-001.......................................78 2560-9000-01 .............................199 2560-9000-02 .............................199 2560-9000-03 .............................199 2560-9000-04 .............................199 2560-9001-01 .............................199 2560-9001-02 .............................199 2560-9001-03 .............................199 2560-9001-04 .............................199 51-311-308 ...................................94 51-311-309 ...................................94 51-311-310 ...................................94 51-311-311 ...................................94 51-311-312 ...................................94 51-311-314 ...................................94 51-311-316 ...................................93 51-311-317 ...................................93 51-311-319 ...................................93 51-311-320 ...................................93 51-311-321 ...................................93 51-311-322 ...................................93 51-311-408 ...................................94 51-320-015 ...................................99 51-320-017 ...................................99 51-320-018 ...................................99 51-320-024 ...................................98 51-320-026 ...................................98 51-320-041 ...................................98 51-320-100 ...................................98 51-320-103 ...................................98 51-320-162 ...................................99 51-320-163 ...................................99 51-320-164 ...................................99 51-320-165 ...................................99 51-320-166 ...................................99 51-320-167 ...................................99 51-320-168 ...................................99 51-320-169 ...................................99 Spectrum part # Page 51-321-312 .................................100 51-321-313 .................................100 51-321-314 .................................100 51-321-317 .................................100 51-321-318 .................................100 51-321-319 .................................100 51-321-322 .................................100 51-321-329 .................................100 51-321-398 .................................100 51-321-399 .................................100 51-321-400 .................................100 51-321-401 .................................100 51-321-607 .................................101 51-321-608 .................................101 51-321-610 .................................101 51-321-649 .................................101 51-321-670 .................................101 51-322-007 ...................................98 51-322-009 ...................................99 51-322-015 ...................................98 51-322-017 ...................................99 51-322-036 ...................................98 51-323-003 ...................................99 51-323-004 ...................................99 51-323-313 .................................100 51-343-028 ...................................91 51-343-034 ...................................91 51-344-006 ...................................88 51-351-603 ...................................95 51-351-604 ...................................95 51-353-003 ...................................90 51-353-007 ...................................90 51-353-053 ...................................91 51-353-054 ...................................91 51-353-055 ...................................91 51-353-066 ...................................91 51-353-067 ...................................91 51-353-076 ...................................92 51-353-077 ...................................92 51-353-078 ...................................92 51-353-079 ...................................92 51-353-080 ...................................92 51-353-081 ...................................92 51-353-095 ...................................90 51-353-099 ...................................90 51-353-100 ...................................90 51-353-101 ...................................91 51-353-109 ...................................91 51-353-110 ...................................91 51-353-111 ...................................91 51-353-112 ...................................91 51-353-113 ...................................91 51-353-114 ...................................91 51-353-116 ...................................91 51-353-120 ...................................91 51-353-155 ...................................91 51-353-156 ...................................92 51-353-157 ...................................92 51-353-207 ...................................91 51-353-287 ...................................91 51-353-336 ...................................94 51-353-344 ...................................94 51-353-345 ...................................94 51-359-001 ...................................88 51-359-007 ...................................89 51-359-021 ...................................89 51-359-024 ...................................89 51-359-044 ...................................89 51-359-050 ...................................89 51-359-051 ...................................89 Spectrum part # Page 51-359-053 ...................................89 51-359-055 ...................................89 51-359-081 ...................................89 51-359-082 ...................................89 51-359-083 ...................................89 51-359-084 ...................................89 51-359-085 ...................................89 51-359-086 ...................................89 51-359-088 ...................................89 51-359-090 ...................................89 51-359-105 ...................................89 51-382-603 ...................................95 51-382-609 ...................................95 51-390-018 ...................................91 51-390-026 ...................................91 51-390-034 ...................................91 51-390-039 ...................................92 51-390-040 ...................................92 51-390-305 ...................................94 51-390-311 ...................................94 51-390-312 ...................................94 51-390-314 ...................................94 51-390-315 ...................................94 51-390-317 ...................................94 51-390-318 ...................................94 51-444-005 ...................................92 51-444-027 ...................................92 51-444-039 ...................................91 51-444-040 ...................................92 51-444-043 ...................................92 51-444-044 ...................................92 51-444-046 ...................................92 51-444-047 ...................................92 51-444-060 ...................................91 51-444-072 ...................................91 51-444-117 ...................................92 51-570-300 ...................................94 51-570-301 ...................................94 51-570-302 ...................................94 51-570-303 ...................................94 51-570-304 ...................................94 51-570-310 ...................................94 51-570-311 ...................................94 51-570-312 ...................................94 51-570-313 ...................................94 51-570-314 ...................................94 51-570-320 ...................................94 51-570-321 ...................................94 51-570-322 ...................................94 51-570-323 ...................................94 51-570-324 ...................................94 51-702-020 ...................................83 51-702-021 ...................................83 51-703-001 ...................................69 51-703-007 ...................................69 51-703-012 ...................................69 51-703-013 ...................................69 51-704-002 ...................................69 51-707-002 ...................................69 51-707-006 ...................................69 51-707-007 ...................................69 51-707-026 ...................................69 51-709-004 ...................................82 51-709-013 ...................................82 51-709-015 ...................................82 51-712-001 ...................................78 51-712-003 ...................................78 51-712-014 ...................................78 51-712-028 ...................................78 51-712-055 ...................................78 Spectrum part # Page 51-712-060 ...................................78 51-712-063 ...................................78 51-712-065 ...................................78 51-712-067 ...................................78 51-712-069 ...................................78 51-713-002 ...................................69 51-713-010 ...................................69 51-714-001 ...................................82 51-714-002 ...................................82 51-714-003 ...................................82 51-714-004 ...................................82 51-714-051 ...................................82 51-714-052 ...................................82 51-714-053 ...................................82 51-714-054 ...................................82 51-714-055 ...................................82 51-714-056 ...................................82 51-714-058 ...................................82 51-717-001 ...................................88 51-717-007 ...................................89 51-719-011 ...................................82 51-719-021 ...................................82 51-719-022 ...................................82 51-719-023 ...................................82 51-719-053 ...................................82 51-719-054 ...................................82 51-723-301 ...................................69 51-723-303 ...................................69 51-726-001 ...................................76 51-726-002 ...................................76 51-726-008 ...................................76 51-726-017 ...................................76 51-729-303 ...................................75 51-729-304 ...................................75 51-729-305 ...................................75 51-729-312 ...................................75 51-744-002 ...................................78 51-744-003 ...................................78 51-750-301 ...................................69 51-750-302 ...................................69 51-750-309 ...................................69 51-750-313 ...................................69 51-750-322 ...................................69 51-761-001 ...................................79 51-761-002 ...................................79 51-762-005 ...................................78 51-762-006 ...................................78 52-160-002-A..............................123 52-160-003-A..............................123 52-160-004-A..............................123 52-160-005-A..............................123 52-160-006-A..............................123 52-188-002-A..............................123 52-188-003-A..............................123 52-188-004-A..............................123 52-188-005-A..............................123 52-188-006-A..............................123 52-227-002 .................................126 52-227-003 .................................126 52-227-004 .................................126 52-227-005 .................................126 52-227-006 .................................126 52-227-007 .................................126 52-227-008 .................................126 52-227-009 .................................126 52-227-010 .................................126 52-227-011 .................................126 52-227-012 .................................126 52-228-002 .................................126 52-228-003 .................................126 SPECTRUM CONTROL INC. * 8031 Avonia Rd. * Fairview, PA 16415 * Phone: 814-474-2207 * Fax: 814-474-2208 * Web site: www.spectrumcontrol.com SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 Appendix Spectrum part # 252 *1566 PRINTER 245-250 v2 12/4/06 9:57 AM Page 2 Part Number Index Appendix Spectrum part # 253 Page 52-228-004 .................................126 52-228-005 .................................126 52-228-006 .................................126 52-228-007 .................................126 52-228-008 .................................126 52-228-009 .................................126 52-228-010 .................................126 52-228-011 .................................126 52-228-012 .................................126 52-898-XXX-XXX........................106 52-960-XXX-XXX........................106 52-970-XXX-XXX........................112 52-971-XXX-XXX........................112 52-978-XXX-XXX........................110 52-979-XXX-XXX........................110 53-038-XXX-XXX........................116 54-310-001 ...................................97 54-310-005 ...................................97 54-310-009 ...................................97 54-310-039 ...................................97 54-310-042 ...................................97 54-367-005 ...................................87 54-367-006 ...................................87 54-367-007 ...................................87 54-367-008 ...................................87 54-367-049 ...................................87 54-367-051 ...................................87 54-367-053 ...................................87 54-367-054 ...................................87 54-367-055 ...................................87 54-367-056 ...................................87 54-367-057 ...................................87 54-367-058 ...................................87 54-370-006 ...................................87 54-370-007 ...................................87 54-370-030 ...................................87 54-370-032 ...................................87 54-370-033 ...................................87 54-370-034 ...................................87 54-371-001 ...................................87 54-763-008 ...................................85 54-763-009 ...................................85 54-779-014 ...................................76 54-779-015 ...................................76 54-779-016 ...................................76 54-779-017 ...................................76 54-779-018 ...................................76 54-779-019 ...................................76 54-785-002 ...................................67 54-785-005 ...................................77 54-785-011 ...................................77 54-785-012 ...................................77 54-785-013 ...................................77 54-785-014 ...................................77 54-785-016 ...................................77 54-785-017 ...................................77 54-786-003 ...................................67 54-786-013 ...................................79 54-786-014 ...................................79 54-786-027 ...................................79 54-786-028 ...................................79 54-789-003 ...................................85 54-790-018 ...................................74 54-790-019 ...................................74 54-790-020 ...................................74 54-790-021 ...................................74 54-790-022 ...................................74 54-790-023 ...................................74 54-844-001 ...................................85 54-844-002 ...................................85 Spectrum part # Page 54-848-005 ...................................85 54-848-008 ...................................85 54-853-001 ...................................85 54-853-004 ...................................85 54-862-001 ...................................74 54-862-002 ...................................74 54-862-003 ...................................74 54-874-010 ...................................38 54-874-011 ...................................72 54-874-012 ...................................72 54-874-013 ...................................72 54-874-014 ...................................72 54-874-015 ...................................72 54-874-016 ...................................72 54-874-017 ...................................72 54-874-018 ...................................72 54713001X5F101M ......................77 54713001X5U102P ......................77 54743001X5U102Z.......................80 54779001X5F100M ......................76 54779001X5U102P ......................76 54790001X5F101M ......................74 54794002X5R101M......................67 54794002X5R471M......................67 54794002X5V102P.......................67 54802002X5R101M......................67 54802002X5R471M......................67 54802002X5V102P.......................67 54803004X5R101M......................67 54803004X5R471M......................67 54803004X5V102P.......................67 54804002X5R101M......................80 54804002X5R471M......................80 54804002X5V102P.......................80 56-102-002 .................................138 56-102-003 .................................138 56-102-004 .................................138 56-102-005 .................................138 56-102-006 .................................138 56-104-002 .................................138 56-104-003 .................................138 56-104-004 .................................138 56-104-005 .................................138 56-104-006 .................................138 56-112-002 .................................138 56-112-003 .................................138 56-112-004 .................................138 56-112-005 .................................138 56-112-006 .................................138 56-114-002 .................................138 56-114-003 .................................138 56-114-004 .................................138 56-114-005 .................................138 56-114-006 .................................138 56-122-002 .................................138 56-122-003 .................................138 56-122-004 .................................138 56-122-005 .................................138 56-122-006 .................................138 56-124-002 .................................138 56-124-003 .................................138 56-124-004 .................................138 56-124-005 .................................138 56-124-006 .................................138 56-201-001 .................................193 56-201-004 .................................193 56-201-006 .................................193 563XXXXXXXXXXXX .................173 56-402-001 .................................133 56-403-001 .................................136 Spectrum part # Page 56-404-001 .................................134 56-407-001 .................................135 56-412-001 .................................133 56-413-001 .................................136 56-414-001 .................................134 56-414-001-HD ...........................134 56-417-001 .................................135 56-422-001 .................................133 56-423-001 .................................136 56-424-001 .................................134 56-427-001 .................................135 56-5XX-XXX-XXX .......................144 56-6XX-XXX-XX .........................145 56-645-002 .................................148 56-700-002 .................................193 56-700-002-JS ............................193 56-701-001 .................................151 56-701-002 .................................151 56-701-003 .................................151 56-701-004 .................................151 56-701-005 .................................151 56-701-006 .................................152 56-701-007 .................................152 56-701-008 .................................152 56-701-009 .................................152 56-701-010 .................................152 56-701-011 .................................152 56-701-012 .................................152 56-701-013 .................................152 56-701-014 .................................152 56-701-015 .................................152 56-701-017 .................................152 56-701-018 .................................152 56-701-019 .................................152 56-701-020 .................................152 56-701-021 .................................152 56-701-022 .................................152 56-701-023 .................................152 56-701-024 .................................152 56-701-025 .................................152 56-701-026 .................................152 56-701-028 .................................151 56-701-029 .................................151 56-701-030 .................................151 56-701-031 .................................152 56-701-032 .................................152 56-701-033 .................................152 56-701-034 .................................152 56-701-035 .................................152 56-701-036 .................................152 56-701-037 .................................152 56-701-038 .................................152 56-701-039 .................................152 56-701-040 .................................152 56-701-041 .................................152 56-701-042 .................................152 56-701-047 .................................151 56-701-048 .................................152 56-701-049 .................................152 56-701-050 .................................152 56-701-081 .................................152 56-701-086 .................................151 56-701-087 .................................152 56-702-001 .................................151 56-702-002 .................................151 56-702-003 .................................151 56-702-004 .................................151 56-702-005 .................................151 56-702-007 .................................151 56-702-008 .................................151 Spectrum part # Page 56-702-009 .................................151 56-702-013 .................................151 56-702-033 .................................151 56-703-001 .................................153 56-703-002 .................................153 56-703-003 .................................153 56-703-004 .................................153 56-703-005 .................................153 56-703-006 .................................154 56-703-007 .................................154 56-703-008 .................................154 56-703-009 .................................154 56-703-010 .................................154 56-703-011 .................................154 56-703-012 .................................154 56-703-013 .................................154 56-703-014 .................................154 56-703-015 .................................154 56-703-016 .................................154 56-703-017 .................................154 56-703-018 .................................154 56-703-019 .................................154 56-703-020 .................................154 56-703-022 .................................153 56-703-023 .................................153 56-703-024 .................................153 56-703-025 .................................154 56-703-026 .................................154 56-703-027 .................................154 56-703-028 .................................154 56-703-029 .................................154 56-703-030 .................................154 56-703-031 .................................154 56-703-032 .................................154 56-703-033 .................................154 56-703-036 .................................153 56-703-037 .................................154 56-703-038 .................................154 56-703-039 .................................154 56-703-047 .................................153 56-704-001 .................................153 56-704-002 .................................153 56-704-003 .................................153 56-704-004 .................................153 56-704-005 .................................153 56-704-007 .................................153 56-704-008 .................................153 56-704-009 .................................153 56-704-018 .................................153 56-704-035 .................................153 56-705-001 .................................154 56-705-002 .................................154 56-705-003 .................................154 56-705-004 .................................154 56-705-005 .................................154 56-705-008 .................................154 56-705-009 .................................154 56-705-010 .................................154 56-705-026 .................................154 56-705-049 .................................154 56-706-001 .................................154 56-706-002 .................................154 56-706-003 .................................154 56-706-004 .................................154 56-706-005 .................................154 56-706-006 .................................154 56-706-007 .................................154 56-706-008 .................................154 56-706-009 .................................154 56-706-017 .................................154 SPECTRUM CONTROL INC. * 8031 Avonia Rd. * Fairview, PA 16415 * Phone: 814-474-2207 * Fax: 814-474-2208 * Web site: www.spectrumcontrol.com SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 *1566 PRINTER 245-250 v2 12/4/06 9:57 AM Page 3 Part Number Index Page 56-711-001 .................................155 56-711-002 .................................155 56-711-003 .................................155 56-711-004 .................................155 56-711-005 .................................155 56-711-006 .................................156 56-711-007 .................................156 56-711-008 .................................156 56-711-009 .................................156 56-711-010 .................................156 56-711-011 .................................156 56-711-012 .................................156 56-711-013 .................................156 56-711-014 .................................156 56-711-015 .................................156 56-711-018 .................................156 56-711-019 .................................156 56-711-020 .................................156 56-711-021 .................................156 56-711-022 .................................156 56-711-023 .................................156 56-711-024 .................................156 56-711-025 .................................156 56-711-026 .................................156 56-711-027 .................................156 56-711-028 .................................155 56-711-029 .................................155 56-711-030 .................................155 56-711-031 .................................156 56-711-032 .................................156 56-711-033 .................................156 56-711-034 .................................156 56-711-035 .................................156 56-711-036 .................................156 56-711-037 .................................156 56-711-038 .................................156 56-711-039 .................................156 56-711-040 .................................156 56-711-041 .................................156 56-711-042 .................................156 56-711-048 .................................155 56-711-049 .................................156 56-711-050 .................................156 56-711-051 .................................156 56-711-085 .................................156 56-711-086 .................................156 56-711-088 .................................155 56-712-001 .................................155 56-712-002 .................................155 56-712-003 .................................155 56-712-004 .................................155 56-712-005 .................................155 56-712-007 .................................155 56-712-008 .................................155 56-712-009 .................................155 56-712-017 .................................155 56-712-039 .................................155 56-713-001 .................................157 56-713-002 .................................157 56-713-003 .................................157 56-713-004 .................................157 56-713-005 .................................157 56-713-006 .................................158 56-713-007 .................................158 56-713-008 .................................158 56-713-009 .................................158 56-713-010 .................................158 56-713-011 .................................158 56-713-012 .................................158 56-713-013 .................................158 Spectrum part # Page 56-713-014 .................................158 56-713-015 .................................158 56-713-016 .................................158 56-713-017 .................................158 56-713-018 .................................158 56-713-019 .................................158 56-713-020 .................................158 56-713-021 .................................157 56-713-022 .................................157 56-713-023 .................................157 56-713-024 .................................158 56-713-025 .................................158 56-713-026 .................................158 56-713-027 .................................158 56-713-028 .................................158 56-713-029 .................................158 56-713-030 .................................158 56-713-031 .................................158 56-713-032 .................................158 56-713-037 .................................157 56-713-038 .................................158 56-713-039 .................................158 56-713-040 .................................158 56-713-045 .................................157 56-714-001 .................................157 56-714-002 .................................157 56-714-003 .................................157 56-714-004 .................................157 56-714-005 .................................157 56-714-006 .................................157 56-714-007 .................................157 56-714-008 .................................157 56-714-017 .................................157 56-714-031 .................................157 56-715-001 .................................158 56-715-002 .................................158 56-715-003 .................................158 56-715-004 .................................158 56-715-005 .................................158 56-715-007 .................................158 56-715-008 .................................158 56-715-009 .................................158 56-715-015 .................................158 56-715-040 .................................158 56-716-001 .................................158 56-716-002 .................................158 56-716-003 .................................158 56-716-004 .................................158 56-716-005 .................................158 56-716-006 .................................158 56-716-007 .................................158 56-716-008 .................................158 56-716-009 .................................158 56-716-013 .................................158 56-721-001 .................................159 56-721-002 .................................159 56-721-003 .................................159 56-721-004 .................................159 56-721-005 .................................159 56-721-006 .................................160 56-721-007 .................................160 56-721-008 .................................160 56-721-009 .................................160 56-721-010 .................................160 56-721-011 .................................160 56-721-012 .................................160 56-721-013 .................................160 56-721-014 .................................160 56-721-015 .................................160 56-721-022 .................................160 Spectrum part # Page 56-721-024 .................................160 56-721-025 .................................160 56-721-026 .................................160 56-721-027 .................................160 56-721-028 .................................160 56-721-029 .................................160 56-721-030 .................................160 56-721-031 .................................160 56-721-032 .................................160 56-721-033 .................................159 56-721-034 .................................159 56-721-035 .................................159 56-721-036 .................................160 56-721-037 .................................160 56-721-038 .................................160 56-721-039 .................................160 56-721-040 .................................160 56-721-041 .................................160 56-721-042 .................................160 56-721-043 .................................160 56-721-044 .................................160 56-721-045 .................................160 56-721-046 .................................160 56-721-047 .................................160 56-721-063 .................................159 56-721-064 .................................160 56-721-065 .................................160 56-721-066 .................................160 56-721-070 .................................160 56-721-111 .................................159 56-721-112 .................................160 56-722-001 .................................159 56-722-002 .................................159 56-722-003 .................................159 56-722-004 .................................159 56-722-005 .................................159 56-722-008 .................................159 56-722-009 .................................159 56-722-010 .................................159 56-722-027 .................................159 56-722-060 .................................159 56-723-001 .................................161 56-723-002 .................................161 56-723-003 .................................161 56-723-004 .................................161 56-723-005 .................................161 56-723-006 .................................162 56-723-007 .................................162 56-723-008 .................................162 56-723-009 .................................162 56-723-010 .................................162 56-723-012 .................................162 56-723-013 .................................162 56-723-014 .................................162 56-723-015 .................................162 56-723-016 .................................162 56-723-017 .................................162 56-723-018 .................................162 56-723-019 .................................162 56-723-020 .................................162 56-723-021 .................................162 56-723-023 .................................161 56-723-024 .................................161 56-723-025 .................................161 56-723-026 .................................162 56-723-027 .................................162 56-723-028 .................................162 56-723-029 .................................162 56-723-030 .................................162 56-723-031 .................................162 Spectrum part # Page 56-723-032 .................................162 56-723-033 .................................162 56-723-034 .................................162 56-723-045 .................................161 56-723-046 .................................162 56-723-047 .................................162 56-723-048 .................................162 56-723-069 .................................161 56-724-001 .................................161 56-724-002 .................................161 56-724-003 .................................161 56-724-004 .................................161 56-724-005 .................................161 56-724-008 .................................161 56-724-009 .................................161 56-724-010 .................................161 56-724-021 .................................161 56-724-046 .................................161 56-725-001 .................................162 56-725-002 .................................162 56-725-003 .................................162 56-725-004 .................................162 56-725-005 .................................162 56-725-019 .................................162 56-725-020 .................................162 56-725-021 .................................162 56-725-064 .................................162 56-725-073 .................................162 56-726-001 .................................162 56-726-002 .................................162 56-726-003 .................................162 56-726-004 .................................162 56-726-005 .................................162 56-726-006 .................................162 56-726-007 .................................162 56-726-008 .................................162 56-726-009 .................................162 56-726-021 .................................162 56-731-001 .................................163 56-731-002 .................................163 56-731-003 .................................163 56-731-004 .................................163 56-731-005 .................................163 56-731-006 .................................164 56-731-007 .................................164 56-731-008 .................................164 56-731-009 .................................164 56-731-010 .................................164 56-731-011 .................................164 56-731-012 .................................164 56-731-013 .................................164 56-731-014 .................................164 56-731-015 .................................164 56-731-018 .................................164 56-731-019 .................................164 56-731-020 .................................164 56-731-021 .................................164 56-731-022 .................................164 56-731-023 .................................164 56-731-024 .................................164 56-731-025 .................................164 56-731-026 .................................164 56-731-027 .................................164 56-731-028 .................................163 56-731-029 .................................163 56-731-030 .................................163 56-731-031 .................................164 56-731-032 .................................164 56-731-033 .................................164 56-731-034 .................................164 SPECTRUM CONTROL INC. * 8031 Avonia Rd. * Fairview, PA 16415 * Phone: 814-474-2207 * Fax: 814-474-2208 * Web site: www.spectrumcontrol.com SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 Appendix Spectrum part # 254 *1566 PRINTER 245-250 v2 12/4/06 9:57 AM Page 4 Part Number Index Appendix Spectrum part # 255 Page 56-731-035 .................................164 56-731-036 .................................164 56-731-037 .................................164 56-731-038 .................................164 56-731-039 .................................164 56-731-040 .................................164 56-731-041 .................................164 56-731-042 .................................164 56-731-048 .................................163 56-731-049 .................................164 56-731-050 .................................164 56-731-051 .................................164 56-731-060 .................................164 56-731-076 .................................163 56-731-077 .................................164 56-732-001 .................................163 56-732-002 .................................163 56-732-003 .................................163 56-732-004 .................................163 56-732-005 .................................163 56-732-006 .................................163 56-732-007 .................................163 56-732-008 .................................163 56-732-009 .................................163 56-732-023 .................................163 56-733-001 .................................165 56-733-002 .................................165 56-733-003 .................................165 56-733-004 .................................165 56-733-005 .................................165 56-733-006 .................................166 56-733-007 .................................166 56-733-008 .................................166 56-733-009 .................................166 56-733-010 .................................166 56-733-011 .................................166 56-733-012 .................................166 56-733-013 .................................166 56-733-014 .................................166 56-733-015 .................................166 56-733-016 .................................166 56-733-017 .................................166 56-733-018 .................................166 56-733-019 .................................166 56-733-020 .................................166 56-733-021 .................................166 56-733-022 .................................166 56-733-023 .................................166 56-733-024 .................................166 56-733-025 .................................166 56-733-026 .................................166 56-733-027 .................................166 56-733-028 .................................166 56-733-029 .................................166 56-733-030 .................................166 56-733-031 .................................166 56-733-032 .................................166 56-733-035 .................................166 56-733-036 .................................166 56-733-037 .................................166 56-733-038 .................................166 56-733-046 .................................165 56-734-001 .................................165 56-734-002 .................................165 56-734-003 .................................165 56-734-004 .................................165 56-734-005 .................................165 56-734-006 .................................165 56-734-007 .................................165 56-734-008 .................................165 Spectrum part # Page 56-734-012 .................................165 56-734-021 .................................165 56-735-001 .................................166 56-735-002 .................................166 56-735-003 .................................166 56-735-004 .................................166 56-735-005 .................................166 56-735-008 .................................166 56-735-009 .................................166 56-735-010 .................................166 56-735-025 .................................166 56-735-034 .................................166 56-736-001 .................................166 56-736-002 .................................166 56-736-003 .................................166 56-736-004 .................................166 56-736-005 .................................166 56-736-006 .................................166 56-736-007 .................................166 56-736-008 .................................166 56-736-009 .................................166 56-736-015 .................................166 56-741-001 .................................167 56-741-002 .................................167 56-741-003 .................................167 56-741-004 .................................167 56-741-005 .................................167 56-741-006 .................................168 56-741-007 .................................168 56-741-008 .................................168 56-741-009 .................................168 56-741-010 .................................168 56-741-011 .................................168 56-741-012 .................................168 56-741-013 .................................168 56-741-014 .................................168 56-741-015 .................................168 56-741-017 .................................168 56-741-018 .................................168 56-741-019 .................................168 56-741-020 .................................168 56-741-021 .................................168 56-741-022 .................................168 56-741-023 .................................168 56-741-024 .................................168 56-741-025 .................................168 56-741-026 .................................168 56-741-027 .................................167 56-741-028 .................................167 56-741-029 .................................167 56-741-030 .................................167 56-741-031 .................................168 56-741-032 .................................168 56-741-033 .................................168 56-741-034 .................................168 56-741-035 .................................168 56-741-036 .................................168 56-741-037 .................................168 56-741-038 .................................168 56-741-039 .................................168 56-741-040 .................................168 56-741-041 .................................168 56-741-042 .................................167 56-741-043 .................................168 56-741-044 .................................168 56-741-045 .................................168 56-741-063 .................................168 56-741-066 .................................167 56-741-067 .................................168 56-742-001 .................................167 Spectrum part # Page 56-742-002 .................................167 56-742-003 .................................167 56-742-004 .................................167 56-742-005 .................................167 56-742-006 .................................167 56-742-007 .................................167 56-742-008 .................................167 56-742-009 .................................167 56-742-022 .................................167 56-743-001 .................................169 56-743-002 .................................169 56-743-003 .................................169 56-743-004 .................................169 56-743-005 .................................169 56-743-006 .................................170 56-743-007 .................................170 56-743-008 .................................170 56-743-009 .................................170 56-743-010 .................................170 56-743-011 .................................170 56-743-012 .................................170 56-743-013 .................................170 56-743-014 .................................170 56-743-015 .................................170 56-743-016 .................................170 56-743-017 .................................170 56-743-018 .................................170 56-743-019 .................................170 56-743-020 .................................170 56-743-021 .................................169 56-743-022 .................................169 56-743-023 .................................169 56-743-024 .................................170 56-743-025 .................................170 56-743-026 .................................170 56-743-027 .................................170 56-743-028 .................................170 56-743-029 .................................170 56-743-030 .................................170 56-743-031 .................................170 56-743-032 .................................170 56-743-033 .................................169 56-743-034 .................................170 56-743-035 .................................170 56-743-036 .................................170 56-743-043 .................................169 56-744-001 .................................169 56-744-002 .................................169 56-744-003 .................................169 56-744-004 .................................169 56-744-005 .................................169 56-744-006 .................................169 56-744-007 .................................169 56-744-008 .................................169 56-744-009 .................................169 56-744-012 .................................169 56-745-001 .................................170 56-745-002 .................................170 56-745-003 .................................170 56-745-004 .................................170 56-745-005 .................................170 56-745-006 .................................170 56-745-007 .................................170 56-745-008 .................................170 56-745-019 .................................170 56-745-027 .................................170 56-746-001 .................................170 56-746-002 .................................170 56-746-003 .................................170 56-746-004 .................................170 Spectrum part # Page 56-746-005 .................................170 56-746-006 .................................170 56-746-007 .................................170 56-746-008 .................................170 56-746-009 .................................170 56-746-018 .................................170 56-882-002 .................................186 56-882-003 .................................186 56-882-004 .................................186 56-882-005 .................................186 56-886-002 .................................187 56-886-003 .................................187 56-886-004 .................................187 56-886-005 .................................187 56-889-002 .................................188 56-889-003 .................................188 56-889-004 .................................188 56-889-005 .................................188 56-AXX-XXX-XXXX ....................190 56-BXX-XXX-X ...........................192 56-EXX-XXX-X-X........................182 572019-00100-70 .......................195 572019-00101-70 .......................195 572019-00102-70 .......................195 572019-00103-70 .......................195 572019-00104-70 .......................195 572019-00105-70 .......................195 572019-00106-70 .......................195 572019-00107-70 .......................195 572019-00108-70 .......................195 572019-00109-70 .......................195 57D13-1506-7200.......................237 57D13-0909-7200.......................237 57D13-1512-7200.......................237 57D13-2512-7200.......................237 57D13-2514-7200.......................237 57D13-3725-7200.......................237 57F01-D112-1275 ......................239 57F11-D140-1275 ......................239 57F11-D170-1275 ......................239 57F01-D212-1575 ......................239 57F11-D240-1575 ......................239 57F11-D270-1575 ......................239 57F01-D312-2075 ......................239 57F11-D340-2075 ......................239 57F11-D370-2075 ......................239 57F01-D412-2775 ......................239 57F11-D440-2775 ......................239 57F11-D470-2775 ......................239 57F01-D512-2685 ......................239 57F11-D540-2685 ......................239 57F11-D570-2685 ......................239 57L12-4339-7200 ......................238 57L12-5767-7200 ......................238 57P13-5216-7200 .......................237 57P12-5216-7a200 .....................237 57R13-4004-7200 ......................238 57R13-2004-7200 ......................238 57R13-2006-7200 ......................238 57R13-1608-7200 ......................238 57R13-4012-7200 ......................238 57R13-2512-7200 ......................238 57R13-1913-7200 ......................238 57R13-5013-7200 ......................238 57R13-1616-7200 ......................238 57R13-2020-7200 ......................238 57R13-4022-7200 ......................238 57R13-3737-7200 ......................238 57R13-5140-7200 ......................238 57R13-5025-7200 ......................238 SPECTRUM CONTROL INC. * 8031 Avonia Rd. * Fairview, PA 16415 * Phone: 814-474-2207 * Fax: 814-474-2208 * Web site: www.spectrumcontrol.com SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 *1566 PRINTER 245-250 v2 12/4/06 9:57 AM Page 5 Part Number Index Page 57T11-0100-0200 ......................241 57T11-0200-0200 ......................241 57T11-0362-0200 ......................241 57T11-0400-0200 ......................241 57T12-0050-0330 ......................241 57T12-0075-0330 ......................241 842448-1.......................................62 842448-2.......................................62 9000-103-0019 .............................91 9001-100-1010 .............................93 9001-100-1013 .............................93 9001-100-1025 .............................93 9001-100-1080 .............................93 9001-100-1081 .............................93 9004-100-2017 .............................95 9010-100-0049 .............................98 9010-100-0054 .............................98 9050-100-0011 .............................89 9051-100-0000 .............................88 9051-101-0018 .............................88 9053-100-0001 .............................88 9053-100-0002 .............................89 9053-100-0008 .............................88 9200-300-0025 .............................90 9200-303-0095 .............................91 9900-381-6004 .............................74 9900-381-6005 .............................74 9900-381-6006 .............................74 9900-381-6013 .............................74 9900-381-6020 .............................74 9900-381-6021 .............................74 9900-381-6022 .............................74 9900-381-6026 .............................74 9910-381-6002 .............................80 9910-381-6003 .............................80 9910-381-6004 .............................80 9920-100-6002 .............................87 9923-100-6004 .............................87 9932-100-6004 .............................97 9932-100-6005 .............................97 9950-381-6007 .............................77 9950-381-6008 .............................77 9950-381-6009 .............................77 CIN-XXXX-HXXXXX .....................42 D38999/20 ..................................211 D38999/20 ..................................218 D38999/21 ..................................218 D38999/23 ..................................219 D38999/24 ..................................211 D38999/24 ..................................219 D38999/26 ..................................219 D38999/40 ..................................220 D38999/41 ..................................220 D38999/42 ..................................221 D38999/44 ..................................221 D38999/46 ..................................221 FCB-XXXX-XXXXXX ....................22 FIN-XXXX-XXXXXX......................36 FPB-XXXX-XXXXXX ....................30 LC0805M103MANA-* ...................55 LC0805M104MANA-* ...................55 LC0805M223MANA-* ...................55 LC0805M224MANA-* ...................55 LC0805M473MANA-* ...................55 LC1206M103MANA-* ...................55 LC1206M104MANA-* ...................55 LC1206M223MANA-* ...................55 LC1206M224MANA-* ...................55 LC1206M473MANA-* ...................55 M83723/71/72.............................224 Spectrum part # Page M83723/73/74.............................225 M83723/77/78.............................225 M83723/79..................................224 M83723/81..................................225 MIL-C-26482...............................226 MIL-C-38999-CS.........................206 MIL-C-38999-ES.........................223 MIL-C-83723...............................222 MS27466 ....................................207 MS27467 ....................................215 MS27468 ....................................208 MS27468 ....................................214 MS27469 ....................................214 MS27470 ....................................214 MS27472 ....................................210 MS27474 ....................................210 MS27474 ....................................216 MS27476 ....................................217 MS27477 ....................................216 MS27484 ....................................216 MS27496 ....................................207 MS27496 ....................................215 MS27497 ....................................209 MS27499 ....................................210 MS27499 ....................................217 MS27505 ....................................208 MS27505 ....................................215 MS27508 ....................................209 MS27508 ....................................217 MS27656 ....................................208 MS3440 ......................................228 MS3449 ......................................229 MS3470 ......................................228 MS3472 ......................................228 MS3474 ......................................229 MS3475 ......................................229 PSM1-XXXX-XXX.........................58 PSM4-XXXX-XXX.........................58 SCI-1020-000 ...............................88 SCI-1020-020 ...............................88 SCI-1021-000 ...............................88 SCI-1021-020 ...............................88 SCI-1150-000 ...............................88 SCI-1150-001 ...............................88 SCI-1250-001 ...............................89 SCI-2030-004 ...............................93 SCI-2030-005 ...............................93 SCI-2030-006 ...............................93 SCI-2030-010 ...............................93 SCI-2030-013 ...............................93 SCI-2040-012 ...............................95 SCI-2040-013 ...............................95 SCI-2060-007 ...............................96 SCI-2060-009 ...............................96 SCI-2060-013 ...............................96 SCI-2060-014 ...............................96 SCI-2120-014 ...............................91 SCI-2130-007 ...............................93 SCI-2130-009 ...............................93 SCI-2130-014 ...............................93 SCI-2140-004 ...............................95 SCI-2140-006 ...............................95 SCI-2140-007 ...............................95 SCI-2150-000 ...............................89 SCI-2150-001 ...............................89 SCI-2160-011 ...............................96 SCI-2160-012 ...............................96 SCI-2160-013 ...............................96 SCI-2160-014 ...............................96 SCI-2320-004 ...............................91 Spectrum part # Page SCI-2320-005 ...............................91 SCI-2320-006 ...............................91 SCI-2320-007 ...............................91 SCI-2320-010 ...............................91 SCI-2320-014 ...............................91 SCI-2330-007 ...............................93 SCI-2330-009 ...............................93 SCI-2330-010 ...............................93 SCI-2330-012 ...............................93 SCI-2340-004 ...............................95 SCI-2340-009 ...............................95 SCI-2340-013 ...............................95 SCI-2340-014 ...............................95 SCI-2350-000 ...............................89 SCI-2350-001 ...............................89 SCI-2360-006 ...............................96 SCI-2360-007 ...............................96 SCI-2360-011 ...............................96 SCI-2360-014 ...............................96 SCI-3102-000 ...............................75 SCI-3102-002 ...............................75 SCI-3102-007 ...............................75 SCI-3112-000 ...............................75 SCI-3112-002 ...............................75 SCI-3112-007 ...............................75 SCI-3112-100 ...............................75 SCI-3112-102 ...............................75 SCI-3112-107 ...............................75 SCI-3122-000 ...............................75 SCI-3122-002 ...............................75 SCI-3122-007 ...............................75 SCI-3223-000 ...............................78 SCI-3303-000 ...............................82 SCI-3313-000 ...............................82 SCI-3323-000 ...............................82 SCI-3513-000 ...............................83 SCI-3523-000 ...............................83 SCI-3543-000 ...............................83 SCI-3553-000 ...............................83 SCI-6120-008 ...............................98 SCI-6120-009 ...............................98 SCI-6130-009 .............................100 SCI-6140-004 .............................101 SCI-6140-006 .............................101 SCI-6140-007 .............................101 SCI-6140-009 .............................101 SCI-6320-004 ...............................98 SCI-6340-004 .............................101 SCI-6340-006 .............................101 SCI-6340-007 .............................101 SCI-9110-100 ...............................74 SCI-9110-273 ...............................74 SCI-9110-503 ...............................74 SCI-9112-273 ...............................74 SCI-9112-503 ...............................74 SCI-9120-101 ...............................74 SCI-9120-102 ...............................74 SCI-9120-103 ...............................74 SCI-9120-502 ...............................74 SCI-9122-101 ...............................74 SCI-9122-102 ...............................74 SCI-9122-103 ...............................74 SCI-9122-502 ...............................74 SCI-9200-503 ...............................77 SCI-9210-103 ...............................77 SCI-9210-273 ...............................77 SCI-9220-101 ...............................77 SCI-9220-102 ...............................77 SCI-9220-502 ...............................77 SCI-9310-273 ...............................80 Spectrum part # Page SCI-9510-503 ...............................83 SCI-9550-102 ...............................83 SCI-9550-332 ...............................83 SCI-9900-000 ...............................70 SCI-9900-153 ...............................70 SCI-9900-303 ...............................70 SCI-9910-272 ...............................70 SCI-9910-502 ...............................70 SCI-9920-101 ...............................70 SCI-9920-122 ...............................70 SCI-9920-501 ...............................70 SCI-9925-000 ...............................71 SCI-9925-101 ...............................71 SCI-9925-122 ...............................71 SCI-9925-153 ...............................71 SCI-9925-303 ...............................71 SCI-9925-501 ...............................71 SCI-9925-502 ...............................71 SF0805C101SBNC-* ....................49 SF0805C220SBNC-* ....................49 SF0805C221SBNC-* ....................49 SF0805C470SBNC-* ....................49 SF0805X102SBNC-* ....................49 SF0805X222SBNC-* ....................49 SF0805X223SBNC-* ....................49 SF0805X471SBNC-* ....................49 SF1205C101SBNB-* ....................49 SF1205C220SBNB-* ....................49 SF1205C221SBNB-* ....................49 SF1205C470SBNB-* ....................49 SF1205X102SBNB-* ....................49 SF1205X222SBNB-* ....................49 SF1205X223SBNB-* ....................49 SF1205X471SBNB-* ....................49 SF1205X473SBND-* ....................49 SF1806C101SDNB-* ....................49 SF1806C220SDNB-* ....................49 SF1806C221SDNB-* ....................49 SF1806C470SDNB-* ....................49 SF1806C471SDNB-* ....................49 SF1806X102SDNB-* ....................49 SF1806X103SDNB-* ....................49 SF1806X222SDNB-* ....................49 SF1806X223SDNB-* ....................49 SF1806Y224ZBNE-*.....................49 SSM1-XXXX-XXX.........................58 SPECTRUM CONTROL INC. * 8031 Avonia Rd. * Fairview, PA 16415 * Phone: 814-474-2207 * Fax: 814-474-2208 * Web site: www.spectrumcontrol.com SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 Appendix Spectrum part # 256 *1566 Covers- PRINTER 12/7/06 9:14 AM Page 3 Our new Check Stock system allows you to gather instant information regarding a particular component's inventory status at Spectrum Control's network of authorized distributors. Selecting the Check Stock icon will provide you with distributor names, part numbers, quantity on hand, online ordering capability and the last date the inventory was updated for that particular component. Use Check Stock to improve your organization's efficiency by simplifying inventory management and reducing inventory We've made finding the right product for your application easier than ever. By using our new online catalog you can tell us the performance parameters you need and we'll help you locate the appropriate product. You start by identifying your mechanical package, add some required electrical characteristics and we'll show you applicable standard part numbers and how they compare to your specifications. New Design Direct allows you to work with our engineers in a collaborative online effort to develop a custom solution tailored to your specific needs. After registering on our site, you'll be able to create and track your project, entirely online. As our engineering team makes changes to your project, you'll receive an e-mail with a direct link to see the current status and provide feedback. Designing a custom solution has never been easier. To see all of our new online tools, come visit us @ www.spectrumcontrol.com SPECTRUM CONTROL INC. * 8031 Avonia Rd. * Fairview, PA 16415 * Phone: 814-474-2207 * Fax: 814-474-2208 * Web site: www.spectrumcontrol.com SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 257 *1566 Covers- PRINTER 12/4/06 10:58 AM Page 4 EMI Filters & Components Ferrite beads & inductors Surface mount filters Discrete EMI filters Filter plates Filter connectors Gaskets & shielding Ceramic capacitors Patch antennas & assemblies Single line filters Filtered terminal blocks Power entry & power line filters Military/multisection filters EMC testing www.specemc.com Microwave Components & Systems Lumped element filters Cavity filters Bandpass filters & duplexers Tubular & waveguide filters Tower mount amplifiers Coaxial resonators Switchable filter bank assemblies Low noise amplifiers Local oscillator doublers Microwave synthesizers Couplers Integrated microwave sub-assemblies www.specwave.com EMI Filters & Components www.specemc.com EMI Filters & Components 8061 Avonia Road Fairview, Pennsylvania 16415 Phone: 814-474-1571 Fax: 814-474-3110 Corporate Headquarters 8031 Avonia Road Fairview, Pennsylvania 16415 Phone: 814-474-2207 Fax: 814-474-2208 www.spectrumcontrol.com Sales Offices NORTH AMERICA 6798 Oak Hall Lane Columbia, Maryland 21045 Phone: 443-259-3491 Fax: 443-259-8672 EUROPE Spectrum Control GmbH Hansastrasse 6 91126 Schwabach, Germany Phone: (49)-9122-795-0 Fax: (49)-9122-795-58 Power Management Systems AC/DC power distribution units & remote reboot power management systems Circuit protection Custom assemblies Power strips www.specpower.com Sensors & Controls Element segments & wiper assemblies Rotary precision potentiometers Linear precision potentiometers Motorized potentiometers Hollow shaft potentiometers Custom & value-added assemblies Temperature sensing probes Heaters & assemblies PTC thermistors NTC thermistors Resistance temperature detectors (RTDs) www.specsensors.com CHINA NEW Spectrum Control Limited 2nd Industrial Area North Ling Tou Industrial Road Qiad Tou Town, Dong Guan City Guang Dong Province 523530 Peoples Republic of China Phone: (011)-86-769-8343-7761 Fax: (011)-86-769-8343-7760 Spectrum Control, Inc. reserves the right to alter the specifications provided in this publication. CERTIFIED CERTIFIED Represented or Distributed by: AHA 11/06 27-0027-0048 (c)2006 Spectrum Control, Inc. Printed in U.S.A.