1
Limitless™ Wireless Solutions
Imagine a world without wires.
What would you do with more freedom?
2
Honeywell’s Limitless™ series of switch solutions is leading the way. Honeywell Sensing and Control developed
this technology to be a cutting-edge, cost-saving solution. That innovation starts whether you’re retrofitting into
an existing industrial or transportation application, or starting a new design. Now you have the freedom to push
your designs and applications further and expand your vision.
For far too long, technology has been tied to the same old way of transmitting and connecting. But there’s a
price to pay for clinging to wired technology. There’s an intangible cost in man-hours and missed production
hours. And there are tangible costs — actual wear-and tear on equipment wiring and connections that can
cause complete disruption of your operation.
Imagine how much could be saved once your best ideas were given free rein...
It’s time to retire the wire. To give your best ideas free rein.
Honeywell’s Limitless™ Series of wireless limit switches and
receivers allows you to go farther, work smarter, and explore
more possibilities than ever before.
3
More standard
options -
Limitless™ products
use a globally license-
free, 802.15.4 RF radio
and commercially available
batteries for easy replacement
anywhere in the world
More
security -
Limitless™ products conform
to the international IEEE 802.15.4
standard and feature 16-bit address
and 128-bit AES security keys
More exibility
Since you’re no
longer tethered
by wire, you can
reconfigure and
network multiple switches,
easily allowing addition,
subtraction, or relocation of
Limitless™ switches
More
savings -
Limitless™ switches
can greatly reduce the
costs of wiring, installation, and
maintenance for all devices
and equipment
More durability - Limitless™ Series
offerings will include versions with
an all-metal body and drive train,
low-temperature capability,
and/or enclosure with an anti-
corrosion epoxy coating
More distance - Limitless™ devices
have up to a 305 m [1000 ft] line-
of-sight range without using
repeaters, depending on
antenna type
More diagnostics -
Limitless™ user-friendly
software provides
information on battery
health, and signal
strength for each specific
input
It’s time to discover the possibilities.
Choose wireless Limitless™
switches to give your ideas free rein.
*Some countries require specific communication certifications.
Contact Honeywell for existing certification information.
4
Honeywell’s Limitless™ product line combines the best of Honeywell’s global limit switches with the latest commercial
state-of-the-art wireless technology. Wireless-enabled limit switches can be used for position sensing and presence/
absence detection for an endless number of applications.
The Limitless™ Series is especially beneficial for remote monitoring applications where wiring or wire maintenance is
not physically possible or economically feasible. Combining this greater flexibility with proven harsh-duty packaging can
result in increased efficiencies for machines, equipment, OEMs, and operators.
Limitless™ Limit Switch Series
WGLA Global Limit Switches
WLS Heavy-Duty Limit Switches
FEATURES
Wireless Design
• Radio (license-free and global*):
WPAN 802.15.4, 2.4 GHz,
point-to-point
• FCC 15, IC, ACMA, COFETEL, IDA,
ETSI, WPC, SRRC, KCC, and ANATEL
(see specific product series for
applicable approvals)
• RoHS compliant
• EMI resistance protects against
external interference
• In excess of 305 m [1000 ft] line-of-
sight communication
• Reliable, flexible, and secure wireless
transmission
• Standard replaceable battery with
ultra-low power consumption
• Direct or remote mount antenna
options
WGLA Series Features
• EN50041 metal enclosure
• IP67; NEMA 1,4,12,13
• Multiple operating heads and lever
options
• Modular construction of components
WLS Series Features
• EN 50041 metal enclosure
• IP67/IP68; NEMA 1, 3, 4, 6, 6P, 12, 13
• Unique all-metal drive train
• Twin shaft seals (rotary)
• Zinc head and body are phosphate
treated and epoxy finished making
it less susceptible to effects from
environmental exposure
• Full complement of operating heads
and levers
• Chemical resistant fluorocarbon seals
(optional)
BENEFITS
• Enables wireless presence/absence
detection in applications/machinery
where wiring is challenging or
not feasible
• Integration of existing wireless
technology with the superior reliability
of Honeywell’s MICRO SWITCH™ limit
switch series
• Ability to reconfigure and network
multiple switches, easily allowing
addition, subtraction or relocation of
Limitless™ switches in the application
• Reduces installation/maintenance
costs with no wires, conduit, strain
relief, clips, connectors, or
connection boxes
• Output options
- Panel-mount monitor: visual,
audible (buzzer), one NPN output
- DIN-mount receiver: visual, 14
NPN/PNP-type outputs
• Consumes ultra-low power to prolong
battery life (replaceable)
• RF board operating in 2.4 GHz
globally license-free frequency band;
WPAN 802.15.4
• SIL reliability data available
upon request
APPLICATIONS
• Construction/ag machines
• Conveyors
• Crane boom/jib/skew position
• Door position
• Grain diverters or flaps
• Hose attachment verification
• Lifts
• Material handling
• Movable machinery
• Presses
• Remote or temporary equipment
• Specialty machines
• Valve position
*Some countries require specific communication certifications.
Contact Honeywell for existing certification information.
5
*Some countries require specific communication certifications.
Contact Honeywell for existing certification information.
WGLA Series WLS Series
Limitless™ global limit switches Product type Limitless™ heavy-duty limit switches
Global, license-free RF bands* Availability Global, license-free RF bands*
Reference WGLA installation drawing Operating
characteristics Reference WLS installation drawing
Side rotary, top plunger, top roller, top roller lever Actuator Side rotary, top plunger, side plunger, top roller
plunger, top adjustable plunger, wobble stick
Rotary lever included w/side rotary;
other lever options available Lever type Many rotary lever options available
Zinc head and body are phosphate treated
and epoxy finished Housing material Zinc head and body are phosphate treated
and epoxy finished
EN 50041 Housing type WLS (EN 50041)
WPAN 802.15.4; 2.4 GHz point-to-point;
specific country communication agency approval
required
Radio
WPAN 802.15.4; 2.4 GHz point-to-point;
specific country communication agency approval
required
Direct or remote-mount antenna options;
omni-directional Antenna type Direct or remote-mount antenna options;
omni-directional
In excess of 305 m [1000 ft] line-of-sight
communication between Limitless™
switches and monitor/receiver when using
2.2dBi integral antenna
Signal range
In excess of 305 m [1000 ft] line-of-sight
communication between Limitless™
switches and monitor/receiver when using
2.2dBi integral antenna
3.6 Vdc Lithium Thionyl Chloride; 2/3 AA size
manufactured by Green Energy p/n ER14335M;
Honeywell p/n WBT1
Battery
3.6 Vdc Lithium Thionyl Chloride; 2/3 AA size
manufactured by Green Energy p/n ER14335M;
Honeywell p/n WBT1
IP67; NEMA 1, 4, 12, 13 Sealing IP67, IP68; NEMA 1, 3, 4, 6, 6P, 12, 13
Latest applicable standards: EN 300 328, V1.7.1;
EN 61326-1 (2006); EN 301 489-1, V1.8.1;
EN 301 489-17, V2.1.1
EMC
Latest applicable standards: EN 300 328, V1.7.1;
EN 61326-1 (2006); EN 301 489-1, V1.8.1;
EN 301 489-17, V2.1.1
IEC 60068-2-27; half sine, 10 g, 6 mS, 3 axis Shock IEC 60068-2-27; half sine, 50 g, 6 mS, 3 axis
IEC 60068-2-6; 10 Hz to 500 Hz
w/ 0,35 mm peak-to-peak, 58 Hz to 500 Hz, 5 g Vibration IEC 60068-2-6; 10 Hz to 58 Hz w/ 0,35 mm
peak-to-peak, 58 Hz to 500 Hz, 5 g
-40 °C to 85 °C [-40 °F to 185 °F] (side rotary and
side plunger)
-25 °C to 85 °C [-13 °F to 185 °F] (all other
actuators)
Operating
temperature
-40 °C to 85 °C [-40 °F to 185 °F]
-30 °C to 85 °C [-22 °F to 185 °F](wobble sticks)
FCC 15.247
Industry Canada RSS 210
ETSI, CE mark
ACMA, C-Tick mark
COFETEL
IDA; ANATEL; SRRC; KCC; WPC
Agency approvals
and standards
FCC 15.247
Industry Canada RSS 210
ETSI, CE mark
ACMA, C-Tick mark
COFETEL
IDA; ANATEL; SRRC; KCC; WPC
6
Limitless™ Limit Switch Series
WGLA and WLS Series
Dimensions and Ordering Options
DTop roller
lever
WGLA
Switch type
A
Country use
code
A
B
US, Canada,
Mexico
All other
approved
countries1, 2, 3
A
A
Operating
head code
A
Roller code mm[in]
WGLA Series
Wireless
Side rotary,
momentary
B
C
Top pin
plunger
Top roller
plunger
1
Gen Code
A
RF Code
1Version 1 A2.4 GHz;
IEEE 802.15.4
02
03
04
05
00
01
00 No antenna; RP-SMA
connector jack
2.2 dBi omni w/switch
mount; straight design
2.2 dBi omni w/switch
mount; tilt/swivel
3.0 dBi omni w/remote
adhesive mount
9.8 ft cable
5.5 dBi omni w/remote
mag. mount, tilt/swivel,
5 ft cable
5.5 dBi omni w/remote
mag. mount, tilt/swivel,
10 ft cable
06
07
9.0 dBi omni w/remote
mag. mount, tilt/swivel
5 ft cable
9.0 dBi omni w/remote
mag. mount, tilt/swivel
10ft cable
6
3
4
5
3
Not applicable
Modification
code
Head assembled
with actuator to
right side
Head assembled
with actuator to
left side
Head assembled
with actuator to
mounting surface
Roller
perpendicular to
mounting surface
Antenna
type code
08
09
8.0 dBi omni w/remote
bkt. mount, str. design
3 ft cable
8.0 dBi omni w/remote
bkt. mount, str. design
11 ft cable
1Use with antenna type
codes 00 - 03, 05, 10, 11
only; usage also allowed
in Country Code A.
2Some countries require
specific communication
certifications. Contact
Honeywell for existing
certification information.
3If Limitless devices are
used on machinery that
may shipped globally,
use country code “B”.
10 2.2 dBi omni w/remote
mag. mount, tilt/swivel
10 ft cable
D38,1 x 6,35
[1.5 x 0.25]
nylon
A
B
19 x 6,35
[0.75 x 0.25]
nylon
19 x 6,35
[0.75 x 0.25]
steel
Not applicable
N318 mm
stainless steel
adjustable rod
J
K
200 mm
aluminum
adjustable rod
140 mm
aluminum
adjustable rod
T19 x 8,76
[0.75 x 0.345]
stainless steel
W
Y
40,0 x 12,7
[1.5 x 0.5]
rubber
50,9 x 12,7
[2.0 x 0.5]
rubber
1
Lever code4
3Yoke roller
1
2
Standard
fixed length
Adjustable
roller
Not applicable
4
5
Adjustable rod
Offset
11 0 dBi omni w/
switch mount;
straight design
4Additional levers on
page 8.
70,00 mm max.
[2.76 in max]
75,9 mm max.
[2.99 in max]
5,3 mm
[0.21 in]
7,3 mm
[0.29 in]
25 mm
[0.98 in]
125 mm
[4.92 in]
42 mm
[1.65 in]
60 mm
[2.36 in]
20 mm [0.79 in]
30,0 mm [1.18 in]
28,0 mm [1.10 in]
10 mm [0.39 in]
Ø 5,3 mm [Ø 0.21 in]
Ø X
Y
Z
42,00 mm
[1.65 in]
31,5 mm [1.24 in]
16 mm [0.63 in]
82 mm
[3.23 in]
102,85 mm
[4.05 in]
62,1 mm
[2.44 in]
Roller Material
Nylon
Steel
Stainless Steel
Rubber
Lever
GLZ51A
GLZ51B
GLZ51T
GLZ51Y
X Dim
19,1 mm [0.75 in]
19,1 mm [0.75 in]
19,1 mm [0.75 in]
50,0 mm [1.97 in]
Y Dim
55,9 mm [2.2 in]
55,9 mm [2.2 in]
56,8 mm [2.24 in]
66,1 mm [2.60 in]
Z Dim
6,4 mm [0.25 in]
6,4 mm [0.25 in]
8,8 mm [0.35 in]
10,0 mm [0.39 in]
NOTE: Not all combinations available.
For further information on establishing any of the above
listings, please contact Honeywell Sensing and Control
or your local sales office.
WGLA NOMENCLATURE
WGLA Series WLS Series
7
JWobble stick4
WLS
Switch type
A
Country use
code
A
B
US, Canada,
Mexico
All other
approved
countries1, 2, 3
A
A
Operating
head code
1
Actuator code
See WLS actuator
code table for details.
WLS Series
Wireless
Side rotary,
momentary
C
E
Top plunger,
plain
Side plunger,
momentary
DTop plunger,
roller
1
Gen Code
A
RF Code
1Version 1 A2.4 GHz;
IEEE 802.15.4
02
03
04
05
00
01
00 No antenna; RP-SMA
connector jack
2.2 dBi omni w/switch
mount; straight design
2.2 dBi omni w/switch
mount; tilt/swivel
3.0 dBi omni w/remote
adhesive mount
9.8 ft cable
5.5 dBi omni w/remote
mag. mount, tilt/swivel
5 ft cable
5.5 dBi omni w/remote
mag. mount, tilt/swivel
10ft cable
06
07
9.0 dBi omni w/remote
mag. mount, tilt/swivel
5 ft cable
9.0 dBi omni w/remote
mag. mount, tilt/swivel
10ft cable
6
3
4
5
3
Not applicable
Modification
code
Head assembled
with actuator to
right side
Head assembled
with actuator to
left side
Head assembled
with actuator to
mounting surface
Roller
perpendicular to
mounting surface
Antenna
type code
08
09
8.0 dBi omni w/remote
bkt. mount, str. design
3 ft cable
8.0 dBi omni w/remote
bkt. mount, str. design
11 ft cable
1Use with antenna type
codes 00 - 03, 05, 10, 11
only; usage also allowed
in Country Code A.
2Some countries require
specific communication
certifications. Contact
Honeywell for existing
certification information.
3If Limitless devices are
used on machinery that
may shipped globally,
use country code “B”.
10 2.2 dBi omni w/remote
mag. mount, tilt/swivel
10 ft cable
Actuators for operating
head code “A” only,
insert actuator code
from table below.
OR
Order actuator
catalog listing
separately for reduced
delivery time.
11 0 dBi omni w/
switch mount;
straight design
NSide rotary,
maintained
VTop plunger,
adjustable
4See page 14 for
more detail.
Code Catalog
Listing
Material Roller Dia. (in) Roller Width (in) Roller Mounting
Fixed 1.5 inch radius
1 Rollerless n/a n/a n/a
1A LSZ51A Nylon 0.75 0.25 Front
1B LSZ51B Steel 0.75 0.25 Front
1C LSZ51C Nylon 0.75 0.25 Back
1D LSZ51D Steel 0.75 0.25 Back
1F LSZ51F Nylon 1.0 0.520 Front
1G LSZ51G Nylon 1.5 0.25 Front
1J LSZ51J Nylon 1.0 0.520 Back
1L LSZ51L Ball bearing 0.75 0.25 Back
1M LSZ51M Nylon 0.75 1.25 Back
1N LSZ51N Steel 0.75 1.25 Front
1P LSZ51P Nylon 0.75 0.50 Front
Adjustable 1.5 in to 3.5 in radius
2 Rollerless n/a n/a n/a
2A LSZ52A Nylon 0.75 0.25 Back
2B LSZ52B Steel 0.75 0.25 Back
2C LSZ52C Nylon 0.75 0.25 Front
2D LSZ52D Steel 0.75 0.25 Front
2E LSZ52E Nylon 0.75 1.30 Front
2J LSZ52J Nylon 1.0 0.50 Front
2K LSZ52K Nylon 1.5 0.25 Front
2L LSZ52L Ball bearing 0.75 0.25 Front
2M LSZ52M Nylon 2.0 0.25 Front
2N LSZ52N Nylon 0.75 0.50 Front
Yoke – 1.5 in radius
3A LSZ53A Nylon 0.75 0.25 Front/Back
3B LSZ53B Steel 0.75 0.25 Front/Back
3D LSZ53D Steel 0.75 0.25 Front/Front
WLS SERIES ACTUATOR CODE TABLE (see page 9 for more detail)
Code Catalog
Listing
Material Roller Dia. (in) Roller Width (in) Roller Mounting
Yoke – 1.5 in radius , continued
3E LSZ53E Nylon 0.75 0.25 Back/Front
3M LSZ53M Nylon 0.75 1.25 Back/Front
3P LSZ53P Steel 0.75 0.25 Back/Back
3S LSZ53S Nylon 0.75 0.25 Back/Back
Rod
4 Hub only n/a n/a n/a
4M LSZ54M Alum, 5.5 in n/a n/a n/a
4N LSZ54N Stainless, 13 in n/a n/a n/a
4R LSZ54R Spring Wire,
12 in
n/a n/a n/a
4V LSZ54V Flex cable, 4.8 in n/a n/a n/a
Offset – 1.5 in radius
5 Rollerless n/a n/a n/a
5A LSZ55A Nylon 0.75 0.25 Back
5B LSZ55B Steel 0.75 0.25 Back
5C LSZ55C Nylon 0.75 0.25 Front
5D LSZ55D Steel 0.75 0.25 Front
5E LSZ55E Nylon 0.75 0.50 Front
5K LSZ55K Nylon 1.5 0.25 Front
Wobble stick
7A LSZ1JGA Delrin™ rod, 5.5 n/a n/a n/a
7M LSZ1JGM Spring wire, 13.0 n/a n/a n/a
7N LSZ1JGN Cable, 5.5 in. n/a n/a n/a
Short xed - 1.3 in radius
9A LSZ59A Nylon 0.75 0.25 Front
9B LSZ59B Steel 0.75 0.25 Front
9C LSZ59C Nylon 0.75 0.25 Back
9D LSZ59D Steel 0.75 0.25 Back
NOTE: Not all combinations available. For further information on establishing
any of the above listings, please contact Honeywell Sensing and Control or your
local sales office.
EXAMPLE: WLS1A01AA1A (ordered with lever included)
Limitless™ heavy-duty limit switch, 2.2 dBi straight antenna, momentary,
standard lever with nylon roller
EXAMPLE: WLS1A01AA (order lever separately)
Limitless™ heavy-duty limit switch, 2.2 dBi straight antenna, momentary.
LSZ51A (standard lever with nylon roller) ordered separately,
WLS NOMENCLATURE
8
Limitless™ Limit Switch Series
WGLA Series
Levers
GLZ51A
fixed rotary lever,
nylon roller, front
GLZ51B
fixed rotary lever,
steel roller, front
GLZ52A
adj. lever,
nylon roller, back
GLZ52B
adj. lever,
steel roller, back
GLZ54N
adjustable rod,
318 mm stainless
steel
GLZ55A
fixed rotary offset
lever, nylon roller,
front
GLZ55B
fixed rotary offset
lever, steel roller, front
GLZ53A
yoke lever, nylon rollers,
front placement
GLZ53B
yoke lever, steel rollers,
front placement
GLZ54K
adjustable rod,
140 mm aluminum
GLZ54J
adjustable rod,
200 mm aluminum
GLZ52C/D
adj. lever,
nylon & steel roller,
front
9
Limitless™ Limit Switch Series
WLS Series
Levers
LSZ51A
fixed rotary lever,
nylon roller, front
LSZ51B
fixed rotary lever,
steel roller, front
LSZ51C
fixed rotary lever,
nylon roller, back
LSZ51D
fixed rotary lever,
steel roller, back
LSZ53A through D
yoke lever, nylon and steel rollers,
front and back placement
LSZ60
one-way
roller lever
LSZ55A
through D
offset lever,
front & back
LSZ52A
through D
adj. lever, nylon &
steel, front/back
LSZ52J
adjustable lever,
1-inch nylon roller
LSZ52K
adjustable lever,
1.5-inch nylon roller
LSZ54M
5.5-inch
aluminum rod
LSZ61
6-inch
loop
LSZ68
12-inch rod
with spring
LSZ54N
13-inch
stainless steel
rod
LSZ54R
12-inch
spring wire
10
Limitless™ WLS Series Heavy Duty Wireless Limit Switches with an eyelet-pull operating head can be used to attach a rope, cable or
chain. It also can be used on cranes as an anti-two-block (A2B) switch. The Limitless™ Series benefits remote monitoring applications
where wiring or wire maintenance is not physically possible or economically feasible. Combining this greater flexibility with proven
harsh-duty packaging can result in increased efficiencies and improved safety for machines, equipment, OEMs, and operators.
Limitless™ Limit Switch Series
WLS Heavy-Duty Limit Switch
with Eyelet Pull
FEATURES
Wireless Design
• Radio (license-free and global):
WPAN 802.15.4, 2.4 GHz, point-to-
point
• FCC 15, IC, ACMA, ETSI, COFETEL,
WPC, IDA, ANATEL, SRRC, and KCC
• Up to 1000 ft [305 m] line of sight
communication range when used with
a Limitless™ WPMM Series wireless
monitor or WDRR Series receiver
module (sold separately)
• Reliable, flexible, and secure wireless
transmission
• Long-life standard replaceable bat-
tery
• Direct or remote mount antenna op-
tions
Mechanical Design
• IP67/IP68; NEMA 1, 4, 6, 6P, 12, 13
• Unique all-metal drive train
• Zinc head and body are phosphate
treated and epoxy finished
• Tested to 750 lb of pull force
• Captive head and body screws
BENEFITS
• Enables presence/absence detection
in remote parts of application/
machinery, where wiring is an issue or
not feasible
• Ability to reconfigure multiple switch-
es that easily allows for adding,
subtracting or relocating Limitless™
WLS switches
• Reduces installation/maintenance
costs with no wires, conduit, strain
relief, clips, connectors, or connec-
tion boxes
• Eliminates issues with wire connec-
tion integrity on moving equipment
• Consumes ultra-low power to prolong
battery life
APPLICATIONS
• Cranes: A2B (anti-two block) switch
• Rope-pull: door activation switch
• Cable pull for production stop
applications (e.g., quality, broken
tool, maintenance, out of parts); not
applicable to human safety-stop
applications
*Some countries require specific communication certifications.
Contact Honeywell for existing certification information.
11
*Some countries require specific communication certifications.
Contact Honeywell for existing certification information.
WLS Series with Eyelet Pull
Product type Limitless™ Wireless Heavy-Duty Limit Switches
Availability Global, license-free bands
Operating
characteristics Operating force: 7 lb approx. or 18 lb approx.
Actuator type Eyelet-pull operating head (pull eyelet in-line with shaft to prevent damage)
Housing material Zinc head and body are phosphate treated and epoxy finished
Radio WPAN 802.15.4; 2.4 GHz
Antenna type RP-SMA jack for direct or remote mount antenna options; omni-directional
Signal range In excess of 305 m [1000 ft] line-of-sight communication between Limitless™ switches and
monitor/receiver when using 2.2 dBi integral antenna
Battery
3.6 Vdc Lithium Thionyl Chloride; 2/3 AA size (Est. life >1yr)
Manufactured by Green Energy, part number ER14335M
Manufactured by Honeywell, part number WBT1
Sealing IP67/IP68; NEMA 1, 4, 6, 6P, 12, 13
EMC Latest applicable standards: EN 300 328, V1.7.1; EN 61326-1 (2006);
EN 301 489-1, V1.8.1; EN 301 489-17, V2.1.1
Shock IEC 60068-2-27; half sine, 10 g, 6 mS, 3 axis
Vibration IEC 60068-2-6; 10-500Hz w/ 0,35 mm peak-to-peak, 58-500 Hz- 5g
Operating
temperature -40 °C to 85 °C [-40 °F to 185 °F]
Agency approvals
and standards
- FCC 15.247: United States of America
- IC RSS 210: Canada
- ETSI, CE mark: European countries
- ACMA, C-TICK: Australia, New Zealand
- IDA: Singapore
- COFETEL: Mexico
- WPC: India
- ANATEL: Brazil
- SRRC: China
- KCC: South Korea
12
Limitless™ Wireless Heavy-Duty
Limit Switch with Eyelet Pull
Dimensions and Ordering Options
NOTE: Not all combinations available.
For further information on establishing any of the above
listings, please contact Honeywell Sensing and Control
or your local sales office.
WLS WITH EYELET PULL NOMENCLATURE
WLS
Switch type
A
Country use
code
A
B
US, Canada,
Mexico
All other
approved
countries1, 2, 3
A
Q
Operating
head code
PO1
Specials
WLS Series
Wireless
See
specials
1
Gen Code
A
RF Code
1
Version 1
A
2.4 GHz;
IEEE 802.15.4
02
03
04
05
00
01
00
No antenna; RP-SMA
connector jack
2.2 dBi omni w/switch
mount; straight design
2.2 dBi omni w/switch
mount; tilt/swivel
3.0 dBi omni w/remote
adhesive mount
9.8 ft cable
5.5 dBi omni w/remote
mag. mount, tilt/swivel
5 ft cable
5.5 dBi omni w/remote
mag. mount, tilt/swivel
10 ft cable
06
07
9.0 dBi omni w/remote
mag. mount, tilt/swivel
5 ft cable
9.0 dBi omni w/remote
mag. mount, tilt/swivel
10 ft cable
3
4
5
3
Head assembled
with actuator towards
nameplate surface
Modification
code
Head assembled
with actuator to
right side
Head assembled
with actuator to
left side
Head assembled
with actuator to
mounting surface
Antenna
type code
08
09
8.0 dBi omni w/remote
bkt. mount, str. design
3 ft cable
8.0 dBi omni w/remote
bkt. mount, str. design
11 ft cable
1Use with antenna type
codes 00 - 03, 05, 10, 11
only; usage also allowed
in Country Code A.
2Some countries require
specific communication
certifications. Contact
Honeywell for existing
certification information.
3If Limitless devices are
used on machinery that
may be shipped globally,
use Country Code “B”.
10
2.2 dBi omni w/remote
mag. mount, tilt/swivel
10 ft cable
11
0 dBi omni w/
switch mount;
straight design
—
PO1
Eyelet-pull
operating head
(low force, 7 lb ref.)
Eyelet-pull
operating head
(high force, 18 lb ref.)
PO2
83,82 mm [3.30 in]
full travel
76,17 mm [2.92 in]
free position
29,21 mm
[1.15 in] 21,59 mm
[0.85 in]
44,45 mm
[1.75 in]
20,32 mm
[0.80 in]
39,12 mm
[1.54 in]
Mounting
pads
31,5 mm
[1.24 in]
59,44 mm
[2.34 in]
19,05 mm
[0.75 in]
10,93 mm [0.43 in]
5,84 mm
[0.23 in]
41,15 mm
[1.62 in]
29,46 mm
[1.16 in]
29,21 mm
[1.15 in]
19,05 mm
[0.75 in]
Mounting
pads
21,59 mm
[0.85 in]
76,17 mm [2.92 in]
free position
29,21 mm
[1.15 in]
19,05 mm
[0.75 in]
Mounting
pads
21,59 mm
[0.85 in]
75,69 mm
[2.98 in]
83,82 mm [3.30 in]
full travel
76,17 mm [2.92 in]
free position
29,21 mm
[1.15 in] 21,59 mm
[0.85 in]
44,45 mm
[1.75 in]
20,32 mm
[0.80 in]
39,12 mm
[1.54 in]
Mounting
pads
31,5 mm
[1.24 in]
59,44 mm
[2.34 in]
19,05 mm
[0.75 in]
10,93 mm [0.43 in]
5,84 mm
[0.23 in]
41,15 mm
[1.62 in]
29,46 mm
[1.16 in]
29,21 mm
[1.15 in]
19,05 mm
[0.75 in]
Mounting
pads
21,59 mm
[0.85 in]
76,17 mm [2.92 in]
free position
29,21 mm
[1.15 in]
19,05 mm
[0.75 in]
Mounting
pads
21,59 mm
[0.85 in]
75,69 mm
[2.98 in]
83,82 mm [3.30 in]
full travel
76,17 mm [2.92 in]
free position
29,21 mm
[1.15 in] 21,59 mm
[0.85 in]
44,45 mm
[1.75 in]
20,32 mm
[0.80 in]
39,12 mm
[1.54 in]
Mounting
pads
31,5 mm
[1.24 in]
59,44 mm
[2.34 in]
19,05 mm
[0.75 in]
10,93 mm [0.43 in]
5,84 mm
[0.23 in]
41,15 mm
[1.62 in]
29,46 mm
[1.16 in]
29,21 mm
[1.15 in]
19,05 mm
[0.75 in]
Mounting
pads
21,59 mm
[0.85 in]
76,17 mm [2.92 in]
free position
29,21 mm
[1.15 in]
19,05 mm
[0.75 in]
Mounting
pads
21,59 mm
[0.85 in]
75,69 mm
[2.98 in]
13
Limitless™ Wireless Heavy-Duty
Limit Switch with Eyelet Pull
Standard Listings
Limitless™ WLS Series with Eyelet Pull for use in US/Canada
WLS 1A11 A Q-4P01 Limitless™ WLS Series heavy-duty limit switch with 7 lb low-force eyelet pull operating head, head assembled with actuator to left
side, 0 dBi omni antenna
WLS 1A11 A Q-P01 Limitless™ WLS Series heavy-duty limit switch with 7 lb low-force eyelet pull operating head, head assembled with actuator to label
side, 0 dBi omni antenna
WLS 1A11 A Q-P02 Limitless™ WLS Series heavy-duty limit switch with 18 lb high-force eyelet pull operating head, head assembled with actuator to label
side, 0 dBi omni antenna
Limitless™ WLS Series with Eyelet Pull for use in all other approved countries
WLS 1A11 B Q-4P01 Limitless™ WLS Series heavy-duty limit switch with 7 lb low-force eyelet pull operating head, head assembled with actuator to left
side, 0 dBi omni antenna
WLS 1A11 B Q-P01 Limitless™ WLS Series heavy-duty limit switch with 7 lb low-force eyelet pull operating head, head assembled with actuator to label
side, 0 dBi omni antenna
WLS 1A11 B Q-P02 Limitless™ WLS Series heavy-duty limit switch with 18 lb high-force eyelet pull operating head, head assembled with actuator to label
side, 0 dBi omni antenna
14
Honeywell’s Limitless™ product line uses the latest commercial off-the-shelf wireless technology and has expanded the WLS Series
to convert almost any electromechanical switch with low-energy contacts (i.e., gold) into a wireless switch. A user-supplied electro-
mechanical switch is simply wired to the WLS Series Single Switch Adapter via the internal or external connections to then become
a wireless-enabled switch for use with the Limitless™ WPMM or WDRR Series of monitors/receivers. The Limitless™ Single Switch
Adapter can be used in a variety of industrial wireless limit switch applications such as reed, contact, pressure, door actuator, etc.
The Limitless™ Series is especially beneficial for remote monitoring applications where wiring or wire maintenance is not physically
possible or economically feasible. Combining this greater flexibility with proven harsh-duty packaging can result in increased efficien-
cies and improved safety for machines, equipment, OEMs, and operators.
Limitless™ Limit Switch Series
WLS Heavy-Duty Limit Switch
Single Switch Adapter
FEATURES
Wireless Design
• Radio (license-free and global):
WPAN 802.15.4, 2.4 GHz, point-to-
point
• FCC 15, IC, ACMA, ETSI, COFETEL,
WPC & IDA
• Up to 305 m [1000 ft] line-of-sight
communication range when used
with a Limitless™ WPMM Series wire-
less monitor or WDRR Series receiver
module (sold separately)
• Reliable, flexible, and secure wireless
transmission
• Standard replaceable battery with
ultra-low power consumption
• Direct or remote mount antenna op-
tions
Mechanical Design
• IP67; NEMA 1, 4, 12, 13
• 4 PIN M12 micro-change receptacle,
cable grip with internal connector wir-
ing options
• Internal battery power
• Body phosphate treated and epoxy
finished with a 30 % glass-filled PBT
plastic head
BENEFITS
• Allows almost any type of
electromechanical switch with
low-energy contacts (i.e., gold) to
become “wireless”
• Enables presence/absence detection
in remote parts of application/machin-
ery, where wiring is an issue or not
feasible
• Ability to reconfigure multiple switch-
es, which easily allows for adding,
subtracting or relocating of the Limit-
less™ WLS Single Switch Adapters
• Reduced installation/maintenance
costs with no wires, conduit, strain
relief, clips, connectors, connection
boxes, etc.
• Eliminates issues with wire connec-
tion integrity on moving equipment
• Consumes ultra-low power to prolong
battery life
APPLICATIONS
• Agricultural equipment
• Construction equipment
• Door actuation (up/down) switch
• Industrial machines
• Lifts
• Machine tools
• Packaging machinery
• Wireless warehouse operations
• Wireless electromechanical switch
applications (i.e., pressure switch,
reed switch, basic switch and/or
limit switch)
*Some countries require specific communication certifications.
Contact Honeywell for existing certification information.
15
*Some countries require specific communication certifications.
Contact Honeywell for existing certification information.
WLS Series Single Switch Adapter
Product type Limitless™ Single Switch Adapter
Availability Global, license-free bands
Housing material Zinc body is phosphate treated and epoxy filled; 30 % glass-filled PBT plastic head
Radio WPAN 802.15.4; 2.4 GHz
Antenna type RP-SMA jack for direct or remote mount antenna options; omni directional standard
Signal range Nominal 305 m [1000 ft] clear line of sight between Limitless™ switch and monitor/receiver when using
2.2 dBi integral antennas
Battery
3.6 Vdc Lithium Thionyl Chloride; 2/3 AA size (Est. life >1yr)
Manufactured by Green Energy, part number ER14335M
Manufactured by Honeywell, part number WBT1
Sealing IP67, NEMA 1, 4, 12, 13
EMC Latest applicable standards: EN 300 328, V1.7.1; EN 61326-1 (2006);
EN 301 489-1, V1.8.1; EN 301 489-17, V2.1.1
Shock IEC 60068-2-27; half sine, 50 g, 6 mS, 3 axis
Vibration IEC 60068-2-6; 10-500Hz w/ 0,35 mm peak-to-peak, 58-500 Hz- 10g
Operating
temperature -40 °C to 85 °C [-40 °F to 185 °F]
Electromechanical
switch
SPDT (Form C) switch with low-energy contacts (i.e., gold) capable of reliably controlling a 3.6 Vdc
@ 30 mA electrical load to ensure proper operation
Electrical
connections
• 4-pin M12 micro-connector with three-pole, single keyway female receptacle
• Cable grip with internal screw connector
Note: Maximum cable length 3 m [9.84 ft]
Communication
Agency Approvals/
Certicates*
- FCC 15.247: United Sates of America
- IC RSS 210: Canada
- COFETEL: Mexico
- ETSI, CE mark: European countries
- ACMA, C-TICK: Australia
- IDA: Singapore
- WPC: India
* Honeywell is continuing to add new Country Communication Agency Approvals as opportunities and requirements are established.
16
Limitless™
Single Switch Adapter
Dimensions and Ordering Options
NOTE: Not all combinations available.
For further information on establishing any of the above
listings, please contact Honeywell Sensing and Control
or your local sales office.
WLS SINGLE SWITCH ADAPTER NOMENCLATURE
WLS
Switch type
A
Country Use
Code
A
B
US, Canada,
Mexico
All other
approved
countries1, 2, 3
Q
Q
Operating
Head Code
WLS
Series
Wireless See specials
1
Gen Code
A
RF Code
1Version 1 A2.4 GHz;
IEEE 802.15.4
11
00
02
00 No antenna; RP-SMA
connector jack
2.2 dBi omni w/switch
mount; tilt/swivel
0 dBi omni w/
switch mount;
straight design
BT2
BT1
Specials
Internal battery w/
micro-connector
on side of head
Antenna
Type Code
1Use with antenna type
codes 00 - 03, 05, 10, 11
only; usage also allowed
in Country Code A.
2Some countries require
specific communication
certifications. Contact
Honeywell for existing
certification information.
3If Limitless devices are
used on machinery that
may shipped globally,
use country code “B”.
3
4
5
Modification Code
(BT2 & BT4 only)
Head assembled
with cable grip/connector
to right side
Head assembled
with cable grip/connector
to left side
Head assembled
with cable grip/connector
to mounting surface
Head assembled
with cable grip/connector
to label side BT1 Internal battery w/
micro-connector
on top of head
BT4 Internal battery w/
cable grip on
side of head
BT3 Internal battery w/
cable grip on
top of head
17
Limitless™
Single Switch Adapter
Standard Listings
Limitless™ Single Switch Adapter for use in US/Canada
M12 Connector
WLS 1A00 A QBT1 Limitless™ WLS Series Single Switch Adapter, no antenna, internal battery with M12 micro-connector on top of head
WLS 1A02 A QBT1 Limitless™ WLS Series Single Switch Adapter, 2.2 dBi tilt/swivel antenna, internal battery with M12 micro-connector on top of head
WLS 1A11 A QBT1 Limitless™ WLS Series Single Switch Adapter, 0 dBi straight antenna, internal battery with M12 micro-connector on top of head
Cable Grip
WLS 1A00 A QBT3 Limitless™ WLS Series Single Switch Adapter, no antenna, internal battery with cable grip on top of head
WLS 1A02 A QBT3 Limitless™ WLS Series Single Switch Adapter, 2.2 dBi tilt/swivel antenna, internal battery with cable grip on top of head
WLS 1A11 A QBT3 Limitless™ WLS Series Single Switch Adapter, 0 dBi straight antenna, internal battery with cable grip on top of head
Limitless™ Single Switch Adapter for use in all other approved countries
M12 Connector
WLS 1A00 B QBT1 Limitless™ WLS Series Single Switch Adapter, no antenna, internal battery with M12 micro-connector on top of head
WLS 1A02 B QBT1 Limitless™ WLS Series Single Switch Adapter, 2.2 dBi tilt/swivel antenna, internal battery with M12 micro-connector on top of head
WLS 1A11 B QBT1 Limitless™ WLS Series Single Switch Adapter, 0 dBi straight antenna, internal battery with M12 micro-connector on top of head
Cable Grip
WLS 1A00 B QBT3 Limitless™ WLS Series Single Switch Adapter, no antenna, internal battery with cable grip on top of head
WLS 1A02 B QBT3 Limitless™ WLS Series Single Switch Adapter, 2.2 dBi tilt/swivel antenna, internal battery with cable grip on top of head
WLS 1A11 B QBT3 Limitless™ WLS Series Single Switch Adapter, 0 dBi straight antenna, internal battery with cable grip on top of head
18
Honeywell’s Limitless™ product line uses the latest commercial off-the-shelf wireless technology. The Limitless™ WLS Series is
especially beneficial for remote monitoring applications where wiring or wire maintenance is not physically possible or economically
feasible. Honeywell has expanded the Limitless™ product line with its industrial Wireless Non-Contact Switch that provides non-
contact presence/absence detection of a variety of different magnet styles and magnetic actuators installed on the end-users’
product, machine, equipment, etc. The Limitless™ WLS Non-Contact Switch’s design features an industrial grade reed switch.
Customers can choose how the reed switch is oriented within the switch’s plastic head, i.e., either top- or side-sensing. Combining this
greater flexibility with proven harsh-duty packaging can result in increased efficiencies and improved safety for industrial machines,
equipment, OEMs, and operators.
Limitless™ Limit Switch Series
WLS Series
Wireless Non-Contact Switch
FEATURES
Wireless Design
• Radio (license-free and global):
WPAN 802.15.4, 2.4 GHz, point-to-
point
• FCC 15, IC, ACMA, ETSI, COFETEL,
WPC & IDA
• Up to 305 m [1000 ft] line-of-sight
communication range when used
with a Limitless™ wireless monitor or
receiver module (sold separately)
• Reliable, flexible, and secure wireless
transmission
• Replaceable battery with ultra-low
power consumption
• Direct or remote mount antenna
options
Mechanical Design
• IP67; NEMA 1, 4, 12, 13
• Top and side sensing heads
• Zinc head and body are phosphate
treated and epoxy finished
BENEFITS
• Allows “non-contact” actuation
• Enables presence/absence detection
in remote parts of application/machin-
ery, where wiring is an issue or not
feasible
• Able to reconfigure and network mul-
tiple switches, or point-to-point with
personalized addresses, which allows
for adding, subtracting or relocating
of the Limitless™ WLS Non-Contact
Switches
• Reduced installation/maintenance
costs with no wires, conduit, strain
relief, clips, connectors, connection
boxes, etc.
• Eliminates issues with wire connec-
tion integrity on moving equipment
• Consumes ultra-low power to prolong
battery life
APPLICATIONS
• Machine tools
• Packaging machinery
• Lifts
• Ag/construction equipment
• Industrial machines
*Some countries require specific communication certifications.
Contact Honeywell for existing certification information.
19
*Some countries require specific communication certifications.
Contact Honeywell for existing certification information.
WLS Series Wireless Non-Contact Switch
Product type Limitless™ Wireless Non-Contact Switch
Availability Global, license-free bands
Operating
characteristics
Operating point: 3,81 mm [0.15 in] min.;
Release point: 15,24 mm [0.60 in] max.
with use of WMG1 magnet (included with WLS Series Non-Contact Switch)
Sensing target Top and side of head
Housing material Zinc head and body are phosphate treated and epoxy finished; 30% glass-filled PBT plastic head
Radio WPAN 802.15.4; 2.4 GHz
Antenna type RP-SMA jack for direct or remote mount antenna options; omni directional standard
Signal range Nominal 305 m [1000 ft]
Clear line-of-sight between Limitless™ switch and monitor/receiver when using 2.2 dBi integral antenna
Battery
3.6 Vdc Lithium Thionyl Chloride; 2/3 AA size (Est. life >1yr)
Manufactured by Green Energy, part number ER14335M;
Manufactured by Honeywell, part number WBT1
Sealing IP67; NEMA 1, 4, 12, 13
EMC Latest applicable standards: EN 300 328, V1.7.1; EN 61326-1 (2006);
EN 301 489-1, V1.8.1; EN 301 489-17, V2.1.1
Shock EC 60068-2-27; half sine, 10 g, 6 mS, 3 axis
Vibration IEC 60068-2-6; 10-58 Hz w/ 0,35 mm peak-to-peak - 5g
Operating
temperature -40 to 85 °C [-40 °F to 185 °F]
Communication
Agency Approvals/
Certicates*
- FCC 15.247: United Sates of America
- IC RSS 210: Canada
- COFETEL: Mexico
- ETSI, CE mark: European countries
- ACMA, C-TICK: Australia
- IDA: Singapore
- WPC: India
* Honeywell is continuing to add new Country Communication Agency Approvals as opportunities and requirements are established
20
Limitless™
Wireless Non-Contact Switch
Dimensions and Ordering Options
NOTE: Not all combinations available.
For further information on establishing any of the above
listings, please contact Honeywell Sensing and Control
or your local sales office.
WLS SERIES NON-CONTACT SWITCH NOMENCLATURE
WLS
Switch Type
A
Country Use
Code
A
B
US, Canada,
Mexico
All other
approved
countries1, 2, 3
Q
Q
Operating
Head Code
WLS
Series
Wireless See specials
1
Gen Code
A
RF Code
1Version 1 A2.4 GHz;
IEEE 802.15.4
11
00
02
00 No antenna; RP-SMA
connector jack
2.2 dBi omni w/switch
mount; tilt/swivel
0 dBi omni w/ switch
mount; straight design
RS2
RS2
Specials
Internal battery w/
reed switch target
on side of head
Antenna
Type Code
1Use with antenna type
codes 00 - 03, 05, 10, 11
only; usage also allowed
in Country Code A.
2Some countries require
specific communication
certifications. Contact
Honeywell for existing
certification information.
3If Limitless devices are
used on machinery that
may shipped globally,
use country code “B”.
3
4
5
Modification Code
(RS2 only)
Head assembled
with target to right side
Head assembled
with target to left side
Head assembled
with target to mounting
surface
Head assembled
with target to label side RS1 Internal battery w/
reed switch target
on top of head
21
Limitless™
Wireless Non-Contact Switch
Standard Listings
Limitless™ Wireless Non-Contact Switch for use in US/Canada
Top Sensing
WLS 1A00 A QRS1 Limitless™ WLS Series Non-Contact Switch with no antenna and a top sensing target
WLS 1A11 A QRS1 Limitless™ WLS Series Non-Contact Switch with a 0 dBi antenna and a top sensing target
Side Sensing
WLS 1A00 A QRS2 Limitless™ WLS Series Non-Contact Switch with no antenna and a side sensing target
WLS 1A11 A QRS2 Limitless™ WLS Series Non-Contact Switch with a 0 dBi antenna and a side sensing target
Limitless™ Wireless Non-Contact Switch for use in all other approved countries
Top Sensing
WLS 1A00 B QRS1 Limitless™ WLS Series Non-Contact Switch with no antenna and a top sensing target
WLS 1A11 B QRS1 Limitless™ WLS Series Non-Contact Switch with a 0 dBi antenna and a top sensing target
Side Sensing
WLS 1A00 B QRS2 Limitless™ WLS Series Non-Contact Switch with no antenna and a side sensing target
WLS 1A11 B QRS2 Limitless™ WLS Series Non-Contact Switch with a 0 dBi antenna and a side sensing target
22
The Limitless™ product line extends to include wireless operator interface. With both momentary and maintained contacts, the wireless
operator interface (WOI) can be used by an operator to provide indication via a pushbutton or another user-chosen operator type (i.e.
22 mm rotary switch, 22 mm key switch, etc.). The WOI Series adds a human interface device to the product-driven interfaces of Limit-
less™ switches and receivers – wireless control from both person and position.
The WOI Series is especially beneficial for remote monitoring applications where wiring or wire maintenance is not physically possible or
economically feasible. Combining this greater flexibility with proven harsh-duty packaging can result in increased efficiencies and ease
in establishing a remote operator for use in a variety of applications, including turning equipment or devices on or off, opening and clos-
ing doors/gates, stopping a production conveyor, indicating the need for service, and much more.
Limitless™ Wireless
Operator Interface
WOI Series
APPLICATIONS
Industrial
• CNC action
• Conveyors
• Door/Gate action
• Lifts
• Material handling
• Motor drives
• Presses
• Pumps
• Quality control buttons
• Specialty machines
• Stop/Start machinery
• Stop/Start production
• Valve action
Transportation
• Agricultural equipment
• Movable machinery
FEATURES
Wireless Design
• Radio (license-free and global):
WPAN 802.15.4, 2.4 GHz, point-to-
point
• FCC 15, IC, ACMA & ETSI
• RoHS compliant
• EMI immunity
• Up to 305 m [1000 ft] communication
range when used with a Limitless™
wireless monitor or receiver module
(sold separately)
• Reliable, flexible, and secure wire-
less transmission
• Standard replaceable battery with
ultra-low power consumption
• Direct or remote mount antenna
options
Mechanical Design
• Aluminum enclosure
• IP65 sealing
• 22 mm flush, 29 mm mushroom, &
40 mm mushroom (push-pull) round
pushbutton operators available
• User chosen/installed operator type
is allowable
• Momentary and maintained contact
options
• Design for ease of installation
BENEFITS
• Enables operator indication (i.e. push
button) from remote locations where
wiring is too costly or not possible
• Flexibility for users to choose and
install their desired operator type;
i.e. 22 mm rotary switch, 22 mm key
switch, etc.
• Ability to reconfigure and network
multiple WOI inputs, or point-to-point
with personalized addresses, which
allows for adding, subtracting or re-
locating of Limitless™ WOI switches
easily
• Offers the ability to be used in con-
junction with Limitless™ switches
configured on a single Limitless™
receiver
• Reduced installation/maintenance
costs with no wires, conduit, strain
relief, clips, connectors, connection
boxes, etc.
• Eliminates issues with wire connec-
tion integrity on moving equipment
• Consumes ultra-low power to prolong
battery life
*Some countries require specific communication certifications.
Contact Honeywell for existing certification information.
23
WOI Series
Product type Limitless™ Operator Interface Switches
Availability Global, license-free bands
Operating force Momentary pushbutton: 6,2 N ±2 N [1.4 lb ±0.45 lb]
Maintained pushbutton: 7,0 N ±2 N [1.6 lb ±0.45 lb]
Actuator type
Pushbutton operators
• 22 mm round flush momentary
• 29 mm mushroom head momentary
• 40 mm mushroom head maintained (push-pull);
No operator option available for use with user supplied 22 mm operator and contact blocks
Actuator/contact
blocks (if user
supplied)
22 mm switch design (i.e. 22mm rotary switch, 22mm key switch, etc.) /gold contact, normally open and
normally closed contact blocks capable of reliably controlling a 30 mA @ 3.6 Vdc electrical load
Actuator colors Black, Green, Red*, Yellow
* not available for the 29 mm mushroom, & 40 mm mushroom (push-pull) pushbuttons
Housing material Powder coated aluminum
Radio WPAN 802.15.4; 2.4 GHz
Antenna type Direct or remote mount antenna options; Omni directional
Signal range Nominal 305 m [1000 ft] clear line of sight between Limitless™ WOI switch and monitor/receiver when
using 2.2 dBi integral antennas
Battery
3.6 Vdc Lithium Thionyl Chloride; 2/3 AA size (Est. life >1.5 years)
Manufactured by Green Energy p/n ER14335M;
Manufactured by Honeywell, part number WBT1
Sealing IP65
EMC Latest applicable standards: EN 300 328, V1.7.1; EN 61326-1 (2006);
EN 301 489-1, V1.8.1; EN 301 489-17, V2.1.1
Shock IEC 60068-2-27; half sine, 50 g, 6 mS, 3 axis
Vibration IEC 60068-2-6; 10-500Hz w/ 0,35 mm peak-to-peak, 58-500 Hz- 10g
Operating
temperature -25 °C to 50 °C [-13 °F to 122 °F]
Agency approvals
and standards
FCC 15.247
Industry Canada RSS 210
ETSI, CE mark
ACMA, C-Tick mark
24
Limitless™ Wireless
Operator Interface
Dimensions and Ordering Options
NOTE: Not all combinations available.
For further information on establishing any of the above listings, please
contact Honeywell Sensing and Control or your local sales office.
WOI NOMENCLATURE
WOI
Module type
A
Country use
code
A
B
US, Canada
Mexico
All other
approved
countries1,2
WOI Series
Operator
Interface
1
GEN code
A
RF code
1Version 1 A2.4 GHz;
IEEE 802.15.4
11
00
02
00 No antenna; RP-SMA
connector jack
2.2 dBi omni w/switch
mount; tilt/swivel
0 dBi omni w/ switch
mount; str. design
Antenna
type code
1 Some countries require
specific communication
certifications. Contact
Honeywell for existing
certification information.
2 If Limitless™ devices are
used on machinery that
may be shipped globally,
use Country Code “B”.
PA
Actuator type
G
Actuator color
None; open hole in
enclosure None
PA Pushbutton only
22 mm round flush button,
momentary
PB Pushbutton only3
29 mm mushroom head,
momentary
PC Pushbutton only3
40 mm mushroom head,
maintained/push-pull
BBlack
GGreen
RRed
YYellow
3NOT AVAILABLE IN RED
3,20 mm
[0.13 in]
24,10 mm ±0,40 mm
[0.95 in ±0.016 in]
43,5 mm
[1.71 in]
R 0,80 mm
[0.30 in] Ø 22,3 mm ±0,40 mm
[Ø 0.88 in ±0.016 in]
63,5 mm
[2.5 in]
Space allowed for
22 mm switch
Operator/Contact Blocks
72,1 mm [2.84 in]
50,1 mm [1.97 in]
25
Limitless™ Wireless
Operator Interface
WOI Standard Listings
Limitless™ WOI Series Operator Interface for use in US/Canada
22 mm ush pushbutton
WOI 1A00 A PAG Limitless™ WOI, no antenna, 22 mm round flush momentary green pushbutton
WOI 1A00 A PAR Limitless™ WOI, no antenna, 22 mm round flush momentary red pushbutton
WOI 1A11 A PAG Limitless™ WOI, 0 dBi straight antenna, 22 mm round flush momentary green pushbutton
WOI 1A11 A PA R Limitless™ WOI, 0 dBi straight antenna, 22 mm round flush momentary red pushbutton
29 mm mushroom pushbutton
WOI 1A00 A PBY Limitless™ WOI, no antenna, 29 mm mushroom head momentary yellow pushbutton
WOI 1A11 A PBY Limitless™ WOI, 0 dBi straight antenna, 29 mm mushroom head momentary yellow pushbutton
40 mm maintained pushbutton
WOI 1A00 A PCY Limitless™ WOI, no antenna, 40 mm maintained yellow pushbutton
WOI 1A11 A PCY Limitless™ WOI, 0 dBi straight antenna, 40 mm maintained yellow pushbutton
Limitless™ WOI Series Operator Interface for use in all other approved countries
22 mm ush pushbutton
WOI 1A00 B PAG Limitless™ WOI, no antenna, 22 mm round flush momentary green pushbutton
WOI 1A00 B PAR Limitless™ WOI, no antenna, 22 mm round flush momentary red pushbutton
WOI 1A11 B PAG Limitless™ WOI, 0 dBi straight antenna, 22 mm round flush momentary green pushbutton
WOI 1A11 B PA R Limitless™ WOI, 0 dBi straight antenna, 22 mm round flush momentary red pushbutton
29 mm mushroom pushbutton
WOI 1A00 B PBY Limitless™ WOI, no antenna, 29 mm mushroom head momentary yellow pushbutton
WOI 1A11 B PBY Limitless™ WOI, 0 dBi straight antenna, 29 mm mushroom head momentary yellow pushbutton
40 mm maintained pushbutton
WOI 1A00 B PCY Limitless™ WOI, no antenna, 40 mm maintained yellow pushbutton
WOI 1A11 B PCY Limitless™ WOI, 0 dBi straight antenna, 40 mm maintained yellow pushbutton
26
Limitless™ WPMM Series wireless panel-mount monitors provide a visual, audio, and output based on a signal received
from a Limitless™ input. Limitless™ WPMM monitors offer quick indication of an actuator position change on a paired
Limitless™ wireless limit switch.
The WDRR Series DIN-Rail receiver accommodates up to 14 Limitless™ digital inputs for applications that need more than
one-input/one-receiver configuration. It provides a separate visual and selectable NPN- or PNP-type output for indication
of a change on a Limitless™ input.
Limitless™ Monitor and Receiver
WPMM Wireless Panel-Mount Monitor
WDRR Wireless DIN-Rail Receiver
APPLICATIONS
• Construction/ag machines
• Conveyors
• Crane boom/jib/skew position
• Door position
• Grain diverters or flaps
• Hose attachment verification
• Lifts
• Material handling
• Movable machinery
• Presses
• Remote or temporary equipment
• Specialty machines
• Valve position
WPMM FEATURES
Wireless Electrical Design
• Radio (license-free and global*):
WPAN 802.15.4, 2.4 GHz, point-to-point
• FCC 15, IC, ACMA, ETSI, COFETEL,
IDA, WPC, SRRC, KCC, and ANATEL
• RoHS compliant
• EMI resistance protects against
external interference
• In excess of 305 m [1000 ft] line-of-
sight communication
• Reliable, flexible, and secure
wireless transmission
• 10 Vdc to 30 Vdc supply
• Three output options: NPN normally
open current sinking, PNP normally
open current sourcing, and solid state
relay
• Diagnostic functions include lost RF
and low battery indication
• Designed primarily for single switch
applications, but can monitor multiple
wireless switches (sold separately)
• Field pairing function allows for
rapid configuration
Mechanical Design
• Panel-mount enclosure (snap-in or
screw mount)
• Polycarbonate, shock resistant,
tamper-proof case
• Sealed to IP67
• Multiple LED function/status
indicators with audible buzzer
(configurable to silent)
• Direct or remote-mount antenna
WDRR FEATURES
Wireless Electrical Design
• Selectable NPN-, PNP-, or totem-
pole- type output
• Fourteen configurable normally open
or normally closed outputs for up to
14 Limitless™ inputs (sold separately)
• Reliable, flexible, and secure
wireless transmission
• Radio (license-free and global*):
WPAN 802.15.4, 2.4 GHz,
point-to-point
• In excess of 305 m [1000 ft] line-
of-sight communication between
Limitless™ switches and monitor/
receiver when using 2.2dBi
integral antenna
• FCC 15, IC, ACMA, ETSI, COFETEL,
IDA, WPC, SRRC, KCC, and ANATEL
• RoHS compliant
• Field pairing allows for rapid adding
or subtracting inputs for
quick configuration
• 10 Vdc to 28 Vdc supply
• Diagnostic functions include lost RF
and low battery indication
Mechanical Design
• DIN Rail or screw mount
• Cage clamp screw terminal blocks for
input/output connections
• Sealed to IP20
• Multiple LED function and
status indicators
• LED RF signal strength indication for
up to 14 Limitless™ inputs
• Direct or remote mount antenna
LIMITLESS™ SERIES BENEFITS
• Ability to reconfigure and network multiple switches, or point-to-point with personalized addresses that allow for adding, subtracting
or relocating Limitless™ switches easily
• Reduced installation/maintenance costs with no wiring, conduit, strain relief, clips, connectors, connection boxes, etc.
• Communication security per the IEEE 802.15.4 standard [16-bit PAN (network) ID,16-bit address and 128-bit security key]
• Eliminates issues with wire and connector integrity on moving equipment
*Some countries require specific communication certifications.
Contact Honeywell for existing certification information.
27
WPMM Series WDRR Series
Limitless™ wireless panel mount monitor Product type Limitless™ wireless din-rail receiver (PLC interface)
WPMM Series Series name WDRR Series
Global, license-free RF bands* Availability Global, license-free RF bands*
LCP, VECTRA E130i Housing material Flame retardant ABS
Snap-in panel or screw-mount design Housing type DIN-Rail or screw-mount design
WPAN 802.15.4, 2.4 GHz point to point Radio type WPAN 802.15.4, 2.4 GHz point-to-point
RP-SMA jack for direct mount or remote antenna
options; omni-directional standard Antenna type RP-SMA jack for direct mount or remote antenna
options; omni-directional standard
In excess of 305 m [1000 ft] line-of-sight
communication between Limitless™
switches and monitor/receiver when using
2.2 dBi integral antenna
Signal range
In excess of 305 m [1000 ft] line-of-sight
communication between Limitless™
switches and monitor/receiver when using
2.2 dBi integral antenna
Three LEDs: green, yellow, red
Power indication: green
Output indication: red
Configuration/diagnostic: green, yellow, red
Buzzer (output indic, config/diag) w/ silent option
Indication
Configuration LEDs: green, yellow, red
14 output/diagnostic LEDs: green, yellow, red
Low battery & lost RF output LEDs: red, green
RF signal strength LEDs: blue
10 Vdc to 30 Vdc Supply voltage 10 Vdc to 28 Vdc
750 mA max. Supply current 500 mA max.
NPN normally open current sinking;
PNP normally open current sourcing;
solid state relay
Output type
Selectable: NPN-type current sinking open collector
or NPN-type “totem pole”; PNP-type current
sourcing open collector or PNP-type “totem pole”
5 mA to 200 mA Load current 10 mA max.
50 uA max. Leakage current 100 uA max.
1.75 Vdc max. @ max. load @ 25 °C [77 °F] Voltage drop 2.0 Vdc max. @ max. load @ 25 °C [77 °F]
3Terminal(s) 18 usable
Quick connect, 0.25 in male blade Termination Cage-clamp screw terminal blocks
IP67 Sealing IP20
Yes Reverse polarity
protection Yes
Latest applicable standards: EN 300 328, V1.7.1;
EN 61326-1 (2006); EN 301 489-1, V1.8.1;
EN 301 489-17, V2.1.1
EMC
Latest applicable standards: EN 300 328, V1.7.1;
EN 61326-1 (2006); EN 301 489-1, V1.8.1;
EN 301 489-17, V2.1.1
IEC 60068-2-27; half sine, 10 g, 6 mS, 3 axis Shock IEC 60068-2-27; Half sine, 10 g, 6 mS, 3 axis
IEC 60068-2-6; 10 Hz to 500 Hz w/ 0,35 mm
peak-to-peak, 58 Hz to 500 Hz- 5 g Vibration IEC 60068-2-6; 10-500Hz w/ 0,35 mm
peak-to-peak, 58-500 Hz- 5 g
-40 °C to 85 °C [-40 °F to 185 °F] Operating temp. -20 °C to 70 °C [-4 °F to 158 °F]
FCC 15.247; IC RSS 210, ETSI, CE mark;
ACMA, C-TICK; COFETEL; IDA; ANATEL; WPC;
SRRC; KCC
Agency approvals
and standards
FCC 15.247; IC RSS 210, ETSI, CE mark;
ACMA, C-TICK; COFETEL; IDA; ANATEL; WPC;
SRRC; KCC
31,87 mm H x 44,40 mm W x 74,30 mm D
[1.25 in H x 1.748 in W x 2.925 in D] ref. Size 88,9 mm H x 152,4 mm W x 38,1 mm D
[3.5 in H x 6 in W x 1.5 in D] ref.
*Some countries require specific communication certifications.
Contact Honeywell for existing certification information.
28
Limitless™ Monitor
WPMM Wireless Panel-Mount Monitor
Dimensions and Ordering Options
WPMM
Switch type
A
Country use
code
A
B
US, Canada,
Mexico
All other
approved
countries1, 2, 3
WPMM
Series
Monitor
1
Gen Code
A
RF Code
1Version 1 A2.4 GHz;
IEEE 802.15.4
02
03
04
05
00
01
00 No antenna; RP-SMA
connector jack
2.2 dBi omni w/switch
mount; straight design
2.2 dBi omni w/switch
mount; tilt/swivel
3.0 dBi omni w/remote
adhesive mount
9.8 ft cable
5.5 dBi omni w/remote
mag. mount, tilt/swivel
5 ft cable
5.5 dBi omni w/remote
mag. mount, tilt/swivel
10 ft cable
06
07
9.0 dBi omni w/remote
mag. mount, tilt/swivel
5 ft cable
9.0 dBi omni w/remote
mag. mount, tilt/swivel
10 ft cable
Antenna
type code
08
09
8.0 dBi omni w/remote
bkt. mount, str. design
3 ft cable
8.0 dBi omni w/remote
bkt. mount, str. design
11 ft cable
1Use with antenna type
codes 00 - 03, 05, 10, 11
only; usage also allowed
in Country Code A.
2Some countries require
specific communication
certifications. Contact
Honeywell for existing
certification information.
3If Limitless™ devices
are used on machinery
that may be shipped
globally, use
Country Code “B”.
10 2.2 dBi omni w/remote
mag. mount, tilt/swivel
10 ft cable
S01
P01
P01 PNP output
Solid state
relay output
Specials
None/NPN output
All dimensions for reference only.
WPMM NOMENCLATURE
29
Limitless™ Receiver
WDRR Wireless Din-Rail Receiver
Dimensions and Ordering Options
WDRR
Switch type
A
Country use
code
A
B
US, Canada
Mexico
All other
approved
countries1,2,3
WDRR
Series
Din-Rail
Receiver
1
GEN code
A
RF Code
1Version 1 A2.4 GHz;
IEEE 802.15.4
02
03
04
05
00
01
00 No antenna; RP-SMA
connector jack
2.2 dBi omni w/switch
mount; straight design
2.2 dBi omni w/switch
mount; tilt/swivel
3.0 dBi omni w/remote
adhesive mount
9.8 ft cable
5.5 dBi omni w/remote
mag. mount, tilt/swivel
5 ft cable
5.5 dBi omni w/remote
mag. mount, tilt/swivel
10 ft cable
06
07
9.0 dBi omni w/remote
mag. mount, tilt/swivel
5 ft cable
9.0 dBi omni w/remote
mag. mount, tilt/swivel
10 ft cable
Antenna
type code
08
09
8.0 dBi omni w/remote
bkt. mount, str. design
3 ft cable
8.0 dBi omni w/remote
bkt. mount, str. design
11 ft cable
1 Use with antenna type
codes 00 - 03, 05, 10, 11
only; usage allowed in
Country Code A.
2 Some countries require
specific communication
certifications. Contact
Honeywell for existing
certification information.
3 If Limitless™ devices are
used on machinery that
may be shipped globally,
use Country Code “B”.
10 2.2 dBi omni w/remote
mag. mount, tilt/swivel
10 ft cable
0
Output code
A
Channel code
0NPN/PNP
selectable A14 channels
WDRR NOMENCLATURE
89,92 mm [3.54 in]
101,6 mm [4.0 in]
4X Ø 3,66 mm
[4X Ø 0.144 in]
30
Limitless™ Limit Switch Series
WLS Series
Operating Heads with Wobble Sticks
LSZ1JGM
13.0 inch spring wire wobble
LSZ1JGN
5.5 inch cable wobble
LSZ1JGA
5.5 inch Delrin® rod wobble
Limitless™ switch actuators may be custom designed by Honeywell S&C’s
engineering team to ensure optimum actuation for specific applications.
31
Limitless™ Series
Accessories
WAN01RSP
straight design,
2.2 dBi gain,
direct mount
connector
WAN02RSP
tilt & swivel design,
2.2 dBi gain,
direct mount
connector
WAN05RSP&
WAMM100RSP-005
T/S, 9 dBi gain,
magnetic mount
WAN03RSP
flat design,
3 dBi gain,
adhesive mount
WAN06RNJ
straight design,
8 dBi gain,
bracket mount
WAN07RSP
straight design,
0 dBi gain, direct
mount connector
WAN11RSP
low-profile dome antenna,
4.0 dBi gain, through-hole screw mount
WAN09RSP
low-profile mobile antenna,
3.0 dBi gain, magnetic mount
WAN10RSP
straight mobile an-
tenna, 5.0 dBi gain,
magnetic mount
WCA200 Series
200 series coax cable assembly
available in a variety of lengths
WAMM100RSP-005/010
100 series coax antenna mount
available in 5 ft. and 10 ft. lengths
WPB1
WPMM mounting
bracket
WPR1
WPMM panel mount
retainer
WAN04RSP
tilt & swivel design,
5.5 dBi gain,
direct mount
connector
Antenna
Type Code
“01”
Antenna
Type Code
“02” Antenna Type
Code “03”
Antenna
Type Code
“11”
Antenna Type
Code “06”
32
Limitless™ WGLA Global Limit Switches for use in US/Canada/Mexico
Side rotary
WGLA 1A01 A A1A Limitless™ WGLA, 2.2 dBi straight antenna, momentary, standard lever with nylon roller
WGLA 1A01 A A1B Limitless™ WGLA, 2.2 dBi straight antenna, momentary, standard lever with steel roller
WGLA 1A01 A A4J Limitless™ WGLA, 2.2 dBi straight antenna, momentary, 200 mm aluminum adjustable rod actuator
WGLA 1A02 A A1A Limitless™ WGLA, 2.2 dBi tilt & swivel antenna, momentary, standard lever with nylon roller
WGLA 1A02 A A1B Limitless™ WGLA, 2.2 dBi tilt & swivel antenna, momentary, standard lever with steel roller
WGLA 1A02 A A4J Limitless™ WGLA, 2.2 dBi tilt & swivel antenna, momentary, 200 mm aluminum adjustable rod actuator
WGLA 1A04 A A1A Limitless™ WGLA, 5.5 dBi remote magnetic mount/t&s antenna with 5ft of cable, momentary, standard lever with nylon roller
WGLA 1A04 A A1B Limitless™ WGLA, 5.5 dBi remote magnetic mount/t&s antenna with 5ft of cable, momentary, standard lever with steel roller
WGLA 1A04 A A4J Limitless™ WGLA,, 5.5 dBi remote magnetic mount/t&s antenna with 5ft of cable, momentary, 200 mm aluminum adj. rod
Top actuators
WGLA 1A01 A B Limitless™ WGLA, 2.2 dBi straight antenna, top pin plunger
WGLA 1A01 A C Limitless™ WGLA, 2.2 dBi straight antenna, top roller plunger
WGLA 1A01 A D Limitless™ WGLA, 2.2 dBi straight antenna, top roller lever
WGLA 1A02 A B Limitless™ WGLA, 2.2 dBi tilt & swivel antenna, top pin plunger
WGLA 1A02 A C Limitless™ WGLA, 2.2 dBi tilt & swivel antenna, top roller plunger
WGLA 1A02 A D Limitless™ WGLA, 2.2 dBi tilt & swivel antenna, top roller lever
WGLA 1A04 A B Limitless™ WGLA, 5.5 dBi remote magnetic mount/tilt & swivel antenna with 5 ft of cable, top pin plunger
WGLA 1A04 A C Limitless™ WGLA, 5.5 dBi remote magnetic mount/tilt & swivel antenna with 5 ft of cable, top roller plunger
WGLA 1A04 A D Limitless™ WGLA, 5.5 dBi remote magnetic mount/tilt & swivel antenna with 5 ft of cable, top roller lever
Limitless™ WGLA Global Limit Switches for use in all other approved countries
Side rotary
WGLA 1A01 B A1A Limitless™ WGLA, 2.2 dBi straight antenna, momentary, standard lever with nylon roller
WGLA 1A01 B A1B Limitless™ WGLA, 2.2 dBi straight antenna, momentary, standard lever with steel roller
WGLA 1A01 B A4J Limitless™ WGLA, 2.2 dBi straight antenna, momentary, 200 mm aluminum adjustable rod actuator
WGLA 1A02 B A1A Limitless™ WGLA, 2.2 dBi tilt & swivel antenna, momentary, standard lever with nylon roller
WGLA 1A02 B A1B Limitless™ WGLA, 2.2 dBi tilt & swivel antenna, momentary, standard lever with steel roller
WGLA 1A02 B A4J Limitless™ WGLA, 2.2 dBi tilt & swivel antenna, momentary, 200 mm aluminum adjustable rod actuator
WGLA 1A04 B A1A Limitless™ WGLA, 5.5 dBi remote magnetic mount/t&s antenna with 5ft of cable, momentary, standard lever with nylon roller
WGLA 1A04 B A1B Limitless™ WGLA, 5.5 dBi remote magnetic mount/t&s antenna with 5ft of cable, momentary, standard lever with steel roller
WGLA 1A04 B A4J Limitless™ WGLA, 5.5 dBi remote magnetic mount/t&s antenna with 5ft of cable, momentary, 200 mm aluminum adj.
Top actuators
WGLA 1A01 B B Limitless™ WGLA, 2.2 dBi straight antenna, top pin plunger
WGLA 1A01 B C Limitless™ WGLA, 2.2 dBi straight antenna, top roller plunger
WGLA 1A01 B D Limitless™ WGLA, 2.2 dBi straight antenna, top roller lever
WGLA 1A02 B B Limitless™ WGLA, 2.2 dBi tilt & swivel antenna, top pin plunger
WGLA 1A02 B C Limitless™ WGLA, 2.2 dBi tilt & swivel antenna, top roller plunger
WGLA 1A02 B D Limitless™ WGLA, 2.2 dBi tilt & swivel antenna, top roller lever
WGLA 1A04 B B Limitless™ WGLA, 5.5 dBi remote magnetic mount/tilt & swivel antenna with 5 ft of cable, top pin plunger
WGLA 1A04 B C Limitless™ WGLA, 5.5 dBi remote magnetic mount/tilt & swivel antenna with 5 ft of cable, top roller plunger
WGLA 1A04 B D Limitless™ WGLA, 5.5 dBi remote magnetic mount/tilt & swivel antenna with 5 ft of cable, top roller lever
Limitless™ Series
WGLA Standard Listings
33
Limitless™ WLS Heavy-Duty Limit Switches for use in US/Canada/Mexico
Side rotary
WLS 1A00 A A Limitless™ heavy-duty limit switch, no antenna, momentary, no lever
WLS 1A01 A A1A Limitless™ heavy-duty limit switch, 2.2 dBi straight antenna, momentary, fixed 1.5 in lever with nylon roller
WLS 1A01 A A1B Limitless™ heavy-duty limit switch, 2.2 dBi straight antenna, momentary, fixed 1.5 in lever with steel roller
WLS 1A01 A A2A Limitless™ heavy-duty limit switch, 2.2 dBi straight antenna, momentary, adjustable 3.5 in lever with nylon roller
WLS 1A01 A A2B Limitless™ heavy-duty limit switch, 2.2 dBi straight antenna, momentary, adjustable 3.5 in lever with steel roller
WLS 1A02 A A1A Limitless™ heavy-duty limit switch, 2.2 dBi tilt/swivel antenna, momentary, fixed 1.5 in lever with nylon roller
WLS 1A02 A A1B Limitless™ heavy-duty limit switch, 2.2 dBi tilt/swivel antenna, momentary, fixed 1.5 in lever with steel roller
WLS 1A02 A A2A Limitless™ heavy-duty limit switch, 2.2 dBi tilt/swivel antenna, momentary, adjustable 3.5 in lever with nylon roller
WLS 1A02 A A2B Limitless™ heavy-duty limit switch, 2.2 dBi tilt/swivel antenna, momentary, adjustable 3.5 in lever with steel roller
Side rotary, maintained head
WLS 1A00 A N Limitless™ heavy-duty limit switch, no antenna, maintained, no lever
WLS 1A01 A N Limitless™ heavy-duty limit switch, 2.2 dBi straight antenna, maintained, no lever
WLS 1A02 A N Limitless™ heavy-duty limit switch, 2.2 dBi tilt/swivel antenna, maintained, no lever
Top actuators
WLS 1A00 A C Limitless™ heavy-duty limit switch, no antenna, top plunger
WLS 1A00 A D Limitless™ heavy-duty limit switch, no antenna, top roller plunger
WLS 1A01 A C Limitless™ heavy-duty limit switch, 2.2 dBi straight antenna, top plunger
WLS 1A01 A D Limitless™ heavy-duty limit switch, 2.2 dBi straight antenna, top roller plunger
WLS 1A02 A C Limitless™ heavy-duty limit switch, 2.2 dBi tilt/swivel antenna, top plunger
WLS 1A02 A D Limitless™ heavy-duty limit switch, 2.2 dBi tilt/swivel antenna, top roller plunger
Limitless™ WLS Heavy-Duty Limit Switches for use in all other approved countries
Side rotary
WLS 1A00 B A Limitless™ heavy-duty limit switch, no antenna, momentary, no lever
WLS 1A01 B A1A Limitless™ heavy-duty limit switch, 2.2 dBi straight antenna, momentary, fixed 1.5 in lever with nylon roller
WLS 1A01 B A1B Limitless™ heavy-duty limit switch, 2.2 dBi straight antenna, momentary, fixed 1.5 in lever with steel roller
WLS 1A01 B A2A Limitless™ heavy-duty limit switch, 2.2 dBi straight antenna, momentary, adjustable 3.5 in lever with nylon roller
WLS 1A01 B A2B Limitless™ heavy-duty limit switch, 2.2 dBi straight antenna, momentary, adjustable 3.5 in lever with steel roller
WLS 1A02 B A1A Limitless™ heavy-duty limit switch, 2.2 dBi tilt/swivel antenna, momentary, fixed 1.5 in lever with nylon roller
WLS 1A02 B A1B Limitless™ heavy-duty limit switch, 2.2 dBi tilt/swivel antenna, momentary, fixed 1.5 in lever with steel roller
WLS 1A02 B A2A Limitless™ heavy-duty limit switch, 2.2 dBi tilt/swivel antenna, momentary, adjustable 3.5 in lever with nylon roller
WLS 1A02 B A2B Limitless™ heavy-duty limit switch, 2.2 dBi tilt/swivel antenna, momentary, adjustable 3.5 in lever with steel roller
Side rotary, maintained head
WLS 1A00 B N Limitless™ heavy-duty limit switch, no antenna, maintained, no lever
WLS 1A01 B N Limitless™ heavy-duty limit switch, 2.2 dBi straight antenna, maintained, no lever
WLS 1A02 B N Limitless™ heavy-duty limit switch, 2.2 dBi tilt/swivel antenna, maintained, no lever
Top actuators
WLS 1A00 B C Limitless™ heavy-duty limit switch, no antenna, top plunger
WLS 1A00 B D Limitless™ heavy-duty limit switch, no antenna, top roller plunger
WLS 1A01 B C Limitless™ heavy-duty limit switch, 2.2 dBi straight antenna, top plunger
WLS 1A01 B D Limitless™ heavy-duty limit switch, 2.2 dBi straight antenna, top roller plunger
WLS 1A02 B C Limitless™ heavy-duty limit switch, 2.2 dBi tilt/swivel antenna, top plunger
WLS 1A02 B D Limitless™ heavy-duty limit switch, 2.2 dBi tilt/swivel antenna, top roller plunger
Limitless™ Series
WLS Standard Listings
34
Limitless™ WPMM Standard Listing
Part Number Description
Output: NPN normally open current sinking
WPMM 1A00 A Limitless™ WPMM monitor with NPN output, no antenna, US/Canada/Mexico
WPMM 1A02 A Limitless™ WPMM monitor with NPN output, 2.2 dBi omni antenna (tilt & swivel design), US/Canada/Mexico
WPMM 1A03 A
Limitless™ WPMM monitor w/ NPN output, 3.0 dBi omni antenna with remote adhesive mount. w/ 9.8 ft cable, US/Canada/Mexico
WPMM 1A04 A Limitless™ WPMM monitor with NPN output, 5.5 dBi omni antenna (tilt & swivel design) with remote magnetic mounting
with 5 ft cable, US/Canada/Mexico
WPMM 1A05 A Limitless™ WPMM monitor with NPN output, 5.5 dBi omni antenna (tilt & swivel design) with remote magnetic mounting
with 10 ft cable, US/Canada/Mexico
WPMM 1A00 B Limitless™ WPMM monitor with NPN output, no antenna, for use in all other approved countries
WPMM 1A02 B Limitless™ WPMM monitor with NPN output, 2.2 dBi omni antenna (tilt & swivel design), for use in all other approved countries
WPMM 1A03 B Limitless™ WPMM monitor w/ NPN output, 3.0 dBi omni antenna w/ remote adhesive mounting with 9.8 ft cable,
for use in all other approved countries
WPMM 1A04 B Limitless™ WPMM monitor with NPN output, 5.5 dBi omni antenna (tilt & swivel design) with remote magnetic mounting
with 5 ft cable, for use in all other approved countries
WPMM 1A05 B Limitless™ WPMM monitor with NPN output, 5.5 dBi omni antenna (tilt & swivel design) with remote magnetic mounting
with 10 ft cable, for use in all other approved countries
Output: PNP normally open current sourcing
WPMM 1A00 A P01 Limitless™ WPMM monitor with PNP output, no antenna, US/Canada/Mexico
WPMM 1A00 B P01 Limitless™ WPMM monitor with PNP output, no antenna, for use in all other approved countries
Output: Solid state relay
WPMM 1A02 A S01 Limitless™ WPMM monitor with solid state relay, 2.2 dBi omni antenna (tilt & swivel design), US/Canada/Mexico
Limitless™ Series
Receiver Listings
Limitless™ WDRR Standard Listings
Part Number Description
WDRR 1A00 A 0A Limitless™ DIN-Rail receiver, no antenna, US/Canada/Mexico
WDRR 1A03 A 0A Limitless™ DIN-Rail receiver, 3.0 dBi omni antenna with remote adhesive mounting with 9.8 ft cable, US/Canada/Mexico
WDRR 1A05 A 0A Limitless™ DIN-Rail receiver, 5.5 dBi omni antenna (tilt/swivel design) with remote magnetic mounting/10 ft cable,
US/Canada/Mexico
WDRR 1A00 B 0A Limitless™ DIN-Rail receiver, no antenna, for use in all other approved countries
WDRR 1A03 B 0A Limitless™ DIN-Rail receiver, 3.0 dBi omni antenna with remote adhesive mounting with 9.8 ft cable, for use in all other
approved countries
WDRR 1A05 B 0A Limitless™ DIN-Rail receiver, 5.5 dBi omni antenna (tilt/swivel design) with remote magnetic mounting/10 ft cable,
for use in all other approved countries
35
Limitless™ Wireless Antenna Standard Listings
Part Number Description
WAN01RSP Limitless™ Series straight wireless antenna with 2.2 dBi gain, reverse polarity SMA plug, connector mount (RP-SMA)
WAN02RSP Limitless™ Series tilt/swivel wireless antenna with 2.2 dBi gain, reverse polarity SMA plug, connector mount (RP-SMA)
WAN03RSP Limitless™ Series flat wireless antenna with 3 dBi gain, reverse polarity SMA plug, adhesive mount with 3,05 m [10 ft] cable
WAN04RSP* Limitless™ Series tilt/swivel wireless antenna with 5.5 dBi gain, reverse polarity SMA plug, connector mount (RP-SMA)
WAN05RSP* Limitless™ Series tilt/swivel wireless antenna with 9 dBi gain, reverse polarity SMA plug, connector mount (RP-SMA)
WAN06RNJ* Limitless™ Series straight wireless antenna with 8 dBi gain, reverse polarity N jack, bracket mount with 0,31 m [1 ft] cable
WAN07RSP Limitless™ Series straight wireless antenna with 0 dBi gain, reverse polarity SMA plug, connector mount 0 dBi straight w/RP-SMA plug
WAN08RSP Limitless™ Series right angle wireless antenna with 0 dBi gain, reverse polarity SMA plug, connector mount 0 dBi straight w/RP-SMA plug
WAN09RSP Limitless™ Series low profile straight antenna with 3.0 dBi gain, reverse polarity SMA plug, mobile magnetic mount with 4,57 m [15 ft] cable
WAN10RSP Limitless™ Series straight antenna with 5.0 dBi gain, reverse polarity SMA plug, mobile magnetic mount with 4,57 m [15 ft] cable
WAN11RSP* Limitless™ Series low profile dome antenna with 4.0 dBi gain, reverse polarity SMA plug, mobile thru-hole screw mount with
3 m [9.8 ft] cable
* not allowed for use with Country Code “B” Limitless™ products.
Limitless™ Series
Standard Antenna Listings
Limitless™ WCA 200 Series Cable Standard Listings
Part Number Description
WCA200RNPRSP-002 Limitless™ Series wireless cable assembly wth 200 Series cable, 2 ft length, reverse polarity N plug to reverse polarity SMA plug,
use only with WAN06RNJ antenna
WCA200RNPRSP-010 Limitless™ Series wireless cable assembly wth 200 Series cable, 10 ft length, reverse polarity N plug to reverse polarity SMA plug,
use only with WAN06RNJ antenna
WCA200RNJRSP-002 Limitless™ Series wireless cable assembly wth 200 Series cable, 2 ft length, reverse polarity SMA jack to reverse polarity SMA plug
WCA200RNJRSP-005 Limitless™ Series wireless cable assembly wth 200 Series cable, 5 ft length, reverse polarity SMA jack to reverse polarity SMA plug
WCA200RNJRSP-010 Limitless™ Series wireless cable assembly wth 200 Series cable, 10 ft length, reverse polarity SMA jack to reverse polarity SMA plug
WCA200RNJRSP-015 Limitless™ Series wireless cable assembly wth 200 Series cable, 15 ft length, reverse polarity SMA jack to reverse polarity SMA plug
WCA200RNJRSP-020 Limitless™ Series wireless cable assembly wth 200 Series cable, 20 ft length, reverse polarity SMA jack to reverse polarity SMA plug
002321-10-EN IL50 GLO Printed in USA.
April 2014
Copyright © 2014 Honeywell International Inc. All rights reserved.
Find Out More
To learn more about Limitless™
wireless limit switches, contact a
Honeywell representative today at
1-800-537-6945 or visit
http://sensing.honeywell.com/limitless
Sensing and Control
Honeywell
1985 Douglas Drive North
Golden Valley, MN 55422
sensing.honeywell.com
There’s an advantage for taking the bold step. For seeing the
possibilities. And seizing the opportunity.
At Honeywell Sensing and Control, we work hard to lead the
way. To develop technologies that are ahead of the curve. To
deliver solutions that anticipate your needs. And sometimes that
innovative mind set allows you to be the market leader. That’s
why Limitless™ switches are the leading wireless switch brand on
the market.
And you can rest assured, Limitless™ switches are the right
product at the right time to help you maximize efficiency and
minimize cost. Because it’s a Honeywell product, backed by world-
class service and support.
Limitless™ Solutions
• Wireless global limit switches
• Wireless heavy-duty switches
• Wireless monitors and receivers
• Wireless operator interface
Potential Applications
• Construction/Ag machines
• Conveyors
• Crane/boom/jib/skew position
• Door position
• Grain diverters or aps
• Hose attachment verication
• Lifts
• Material handling machinery
• Moveable machinery
• Presses
• Remote or temporary equipment
• Valve position
Part Innovation. Part Engineering. Total Solutions.
WARRANTY/REMEDY
Honeywell warrants goods of its manufacture as being free of defective materials
and faulty workmanship. Honeywell’s standard product warranty applies unless
agreed to otherwise by Honeywell in writing; please refer to your order acknowl-
edgement or consult your local sales office for specific warranty details. If war-
ranted goods are returned to Honeywell during the period of coverage, Honeywell
will repair or replace, at its option, without charge those items it finds defective.
The foregoing is buyer’s sole remedy and is in lieu of all other warranties,
expressed or implied, including those of merchantability and tness for a
particular purpose. In no event shall Honeywell be liable for consequential,
special, or indirect damages.
While we provide application assistance personally, through our literature and
the Honeywell web site, it is up to the customer to determine the suitability of the
product in the application.
Specifications may change without notice. The information we supply is believed to
be accurate and reliable as of this printing. However, we assume no responsibility
for its use.
SALES AND SERVICE
Honeywell serves its customers through a worldwide network of sales offices,
representatives and distributors. For application assistance, current specifications,
pricing or name of the nearest Authorized Distributor, contact your local sales office
or:
E-mail: info.sc@honeywell.com
Internet: http://sensing.honeywell.com/limitless
Phone and Fax:
Asia Pacific +65 6355-2828; +65 6445-3033 Fax
Europe +44 (0) 1698 481481; +44 (0) 1698 481676 Fax
Latin America +1-305-805-8188; +1-305-883-8257 Fax
USA/Canada +1-800-537-6945; +1-815-235-6847
+1-815-235-6545 Fax
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
Honeywell:
LIMITLESSDEMOKIT-WLS