Integrated circuits for RF applications TBA 530 RGB matrix and pre-amplifier for PAL colour television receivers Supply voltage Ug 12 Vv Input d.c. voltage R-Y Pin 2 Uj 1.4 Vss G-Y Pin 3 Ui 0.82 Vss B-Y Pin 4 U; 1.78 Vss Y Pin 5 U; 1 Vss Voltage amplification (including RGB output stages) f= 0.5 MHz u 100 3-dB Bandwidth f >6 MHz Eingange Inputs Ui) >; (TBA560C) RGB Endstufen IH Output stages Ue-y) Ah Features: @ Associated with TBA 520 direct drive of RGB-output transistors possible @ RGB drive circuit with or without clamping possible Case: 20 A 16 DIN 41866 JEDEC MO 001 AC or QIP 16-lead or DIP 16-lead Dimensions see page 60 Number 7 or 8 Ausgange zur Bildrbre (TBA520) Outpits to the picnye tube UG-y) at |_| (TBAS20) u, 2 UR-Y) eo (TBA 520) TBA 540 Reference circuit for PAL-colour TV receivers for generating colour carrier, colour killer, PAL-identification signals and control voltage for chroma amplifier 741498 Tk Features: @ Wide lock-in and holding range of reference oscillator @ Controlled oscillator amplitude 20 A 16 DIN 41866 JEDEC MO 001 AC or QIP 16-lead Dimensions see page 60 Number 7 or 8 Supply voltage Pin 3 Us 12 Vv Drive voltage for colour killer Switching position 1 "ON Pin 7 Uqi 11 Vv 0 "OFF" Pin 7 Ugo <0.27 Vv - Case: Lock-in-range of subcarrier oscillator Afeang +300 Hz Phase difference between reference and burst signal at a frequency difference of 200 Hz Pin4,Pin5 Ag +5 tdentifikation ACC Farbabschaitsignal alternierender Burst (TBA 520) (TBAS6OC) Colour killer signal alternating burst (TBA 560C) (TBA c) Acc- =12V ACC-gain adjustinent Steuergen. Farbadschalt. Colour driver Uace Erzeugung Generation ACC ~ Pegeleinsteliung U, - ACC- level gRet(B-) (TBA5S20) Suitch H(1pa $20) 2 + Ugnetn-y) Amplitudengeregelter Osziliator Amplitude controlled oscillator 4,43 MHz 721144 Tk Data book reference: S 8 E 39