2,A
!"
!"
!"
!" ! "
!" #
!" $% &&
'()*
!" +,-*../$
!"-&+
$, -./.0$./1
!" +&,
!"2+.3.(&4536
!" $+#
!" $"+-7&
8
9
!"
#$!%&'&!&(')*'(" (!&"
&&(!&"'"& +,-
%&.((/!&$
0.$%&.(/!&$
12!.$/!&$
/
/
/
3 4 /
5#(/!&$ / 3 6 4 7 4 /
8(&$"9 : 8
;<(%&.&"# $
73#$!&!<&( "
&"!&"=>15"?
: 8
&"/!&$:
8 / @ 3 6 /
%&.(
8&"12!.$/!&$
:
4 A8
((,=;? 3 #
,&!> &&&=;? 6
9&$&"#&$& &$ ' <B
; 5& ":8':8':8
5& "&5)*&"&!"((!&$4/1
ITO-220
Dim Min Max Min Max
A 14.9 15.1 0.587 0.594
B — 10.5 — 0.413
C 2.62 2.87 0.103 0.113
D 3.56 4.06 0.140 0.160
E 13.46 14.22 0.530 0.560
F 0.68 0.94 0.027 0.037
G 3.74 Ø 3.91 Ø 0.147 Ø 0.154 Ø
H 5.84 6.86 0.230 0.270
I 4.44 4.70 0.175 0.185
J 2.54 2.79 0.10 0.110
K 0.35 0.64 0.014 0.025
L 2.9
P 2.41 2.67 0.095 0.105
In mm In inch
•!! !!"#$•
•%&'(&)*+,,---.&./0•12&%#%3&./0•
0.1303.3 0.114
SENSITRON
SEMICONDUCTOR
30
60
90
0
120
150
180
1 10 100
I , PEAK FORWARD SURGE CURRENT (A)
FSM
NUMBER OF CYCLES AT 60Hz
Fig. 3 Max Non-Repetitive Surge Current
8.3 ms single half-sine-wave
JEDEC method
10
100
400
0.1 1.0 10 100
V , REVERSE VOLTAGE (V)
Fig. 4 Typical Junction Capacitance
R
1003 -1006
1000 -1002
C,CAPACITANCE(pF)
j
0
2
4
6
8
10
0 50 100 150
I,AVERAGEFORWARDCURRENT(A)
(AV)
T , CASE TEMPERATURE ( C)
Fig. 1 Forward Current Derating Curve
C°
0.1
1.0
10
100
0.2 0.6 1.0 1.4
I , INSTANTANEOUS FORWARD CURRENT (A)
F
V , INSTANTANEOUS FORWARD VOLTAGE (V)
Fig. 2 Typical Forward Characteristics
F
Pulse width = 300 s
2% duty cycle µ
1006
1003 - 1004
1000 -1002
•!! !!"#$•
•%&'(&)*+,,---.&./0•12&%#%3&./0•
2,A
• 221 West Industry Court Deer Park, NY 11729-4681 (631) 586-7600 FAX (631) 242-9798 •
• World Wide Web Site - http://www.sensitron.com • E-Mail Address - sales@sensitron.com •
DISCLAIMER:
1- The information given herein, including the specifications and dimensions, is subject to change without prior not ice to improve
product characteristics. Before ordering, purchasers are advised to contact the Sensitron Semiconductor sales department for the latest
version of the datasheet(s).
2- In cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviation, traffic equipment,
medical equipment , and safety equipment) , safety should be ensured by using semiconductor devices that feature assured safety or by
means of users’ fail-safe precautions or other arrangement .
3- In no event shall Sensitron Semiconductor be liable for any damages that may result from an accident or any other cause during
operation of the user’s units according to the datasheet(s). Sensitron Semiconductor assumes no responsibility for any intellectual
property claims or any other problems that may result from applications of information, products or circuits described in the datasheets.
4- In no event shall Sensitron Semiconductor be liable for any failure in a semiconductor device or any secondary damage resulting from
use at a value exceeding the absolute maximum rating.
5- No license is granted by the datasheet(s) under any patents or other rights of any third party or Sensitron Semiconductor.
6- The datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed writ ten permission of
Sensitron Semiconductor.
7- The products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their application will
hinder maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or any third
party. When exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws and
regulations.
SENSITRON
SEMICONDUCTOR
2,A
