www.clare.com
DS-LCA210L-R1.0 1
LCA210L
Dual Pole OptoMOS®Relays
Applications
Features
Description
Approvals
Ordering Information
LCA210L Units
Blocking Voltage 350 V
Load Current 100 mA
Max RON 35 Ω
Pin Configuration
Switching Characteristics of
Normally Open (Form A) Devices
•Small 8 Pin DIP Package
•Low Drive Power Requirements (TTL/CMOS
Compatible)
•No Moving Parts
•High Reliability
•Arc-Free With No Snubbing Circuits
•3750VRMS Input/Output Isolation
•No EMI/RFI Generation
•Machine Insertable, Wave Solderable
•Surface Mount and Tape & Reel Versions Available
•Telecom Switching
•Tip/Ring Circuits
•Modem Switching (Laptop, Notebook, Pocket
Size)
•Hookswitch
•Dial Pulsing
•Ground Start
•Ringer Injection
•Instrumentation
•Multiplexers
•Data Acquisition
•Electronic Switching
•I/O Subsystems
•Meters (Watt-Hour, Water, Gas)
•Medical Equipment-Patient/Equipment Isolation
•Security
•Aerospace
•Industrial Controls
The LCA210L is a common input 1-Form 2A solid
state relay which has two independent optically cou-
ple MOSFETS controlled by a common input signal.
The efficient current limiting MOSFET switches and
photovoltaic die use Clare’s patented OptoMOS®
architecture to provide 3750 VRMS of input to output
isolation. The optically coupled input is controlled by
highly efficient GaAIAs infrared LEDs. Common input
OptoMOS relays can replace standard dual pole
relays in a variety of applications. The common input
relay eliminates the need to make an external circuit
connection when both poles are controlled by a com-
mon signal.
•UL Recognized: File Number E76270
•CSA Certified: File Number LR 43639-10
•Certified to:
•EN 60950
•EN 41003
•IEC 950
•AS/NZS 3260
Part # Description
LCA210L 8 Pin DIP (50/Tube)
LCA210LS 8 Pin Surface Mount (50/Tube)
LCA210LSTR 8 Pin Surface Mount (1000/Reel)
CONTROL
LOAD
10ms
10% 10%
90%
+
TON TOFF
+
+
1
2
3
4
NC
+ Control
Ð Control
NC
8
7
6
5
Output 1
Output 2
Output 1
Output 2
LCA210L Pinout
www.clare.com
2
LCA210L
Rev. 1.0
Parameter Conditions Symbol Min Typ Max Units
Output Characteristics @ 25°C
Load Current (Continuous) - IL-- 85mA
Peak Load Current 10ms max ILPK - - 170 mA
On-Resistance IL=85mA RON -- 35Ω
Off-State Leakage Current VL=350V ILEAK -- 1µA
Switching Speeds
Turn-On IF=8mA, VL=10V TON -- 4ms
Turn-Off IF=8mA, VL=10V TOFF -- 4ms
Output Capacitance 50V; f=1MHz COUT -25 - pF
Current Limit IF=8mA ICL 130 170 210 mA
*Input Characteristics @ 25°C
Input Control Current IL=120mA IF8 - 100 mA
Input Dropout Current - - 0.8 1.4 - mA
Input Voltage Drop IF=8mA VF0.9 1.2 1.4 V
Reverse Input Voltage - VR-- 5V
Reverse Input Current VR=5V IR- - 20 µA
Input to Output Capacitance - CI/O -3 -pF
Input to Output Isolation - VI/O 3750 - - VRMS
*Input characteristics represent requirements of two parallel connected LEDs.
Parameter Min Typ Max Units
Input Power Dissipation - - 1501mW
Input Control Current - - 100 mA
Peak (10ms) - - 1 A
Reverse Input Voltage - - 5 V
Relay Blocking Voltage - - 350 V
Total Power Dissipation - - 8002mW
Isolation Voltage
Input to Output 3750 - - VRMS
Operational Temperature -40 - +85 °C
Storage Temperature -40 - +125 °C
Soldering Temperature
DIP Package - - +260 °C
Flatpack/Surface Mount
Package - - +220 °C
(10 Seconds Max.)
1Derate Linearly 1.33 mw/˚C
2Derate Linearly 6.67 mw/˚C
Absolute Maximum Ratings are stress ratings. Stresses in
excess of these ratings can cause permanent damage to
the device. Functional operation of the device at these or
any other conditions beyond those indicated in the opera-
tional sections of this data sheet is not implied. Exposure
of the device to the absolute maximum ratings for an
extended period may degrade the device and effect its
reliability.
Absolute Maximum Ratings (@ 25˚ C)
Electrical Characteristics
LCA210L
www.clare.com 3
Rev. 1.0
PERFORMANCE DATA*
*The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application
department.
LCA210L
Typical LED Forward Voltage Drop
(N=50 Ambient Temperature = 25°C)
IF = 8mADC
35
30
25
20
15
10
5
01.17 1.19 1.21 1.23 1.25
LED Forward Voltage Drop (V)
Device Count (N)
LCA210L
Typical On-Resistance Distribution
(N=50 Ambient Temperature = 25°C)
(Load Current = 120mADC; IF=2mADC)
35
30
25
20
15
10
5
0
17.0 17.8 18.6 19.417.4 18.2 19.0
On-Resistance (Ω)
Device Count (N)
LCA210L
Typical Blocking Voltage Distribution
(N=50 Ambient Temperature = 25°C)
35
30
25
20
15
10
5
0420 430 440 450425 435 445
Blocking Voltage (V)
Device Count (N)
LCA210L
Typical IF for Switch Operation
(N=50 Ambient Temperature = 25°C)
(Load Current = 85mADC)
1.30 2.34 3.380.78 1.82 2.86 3.9
LED Current (mA)
Device Count (N)
25
20
15
10
5
0
LCA210L
Typical IF for Switch Dropout
(N=50 Ambient Temperature = 25°C)
(Load Current = 85mADC
25
20
15
10
5
0
LED Current (mA)
Device Count (N)
)
1.30 2.34 3.380.78 1.82 2.86 3.9
LCA210L
Typical Turn-On Time
(N=50 Ambient Temperature = 25°C)
(Load Current = 85mADC; IF = 8mADC)
0.6 0.8 1.0 1.20.7 .9 1.1
Turn-On (ms)
Device Count (N)
25
20
15
10
5
0
LCA210L
Typical Turn-Off Time
(N=50 Ambient Temperature = 25°C)
(Load Current = 85mADC; IF = 8mADC)
0.0 0.2 0.4 0.60.50.30.1
Turn-Off (ms)
Device Count (N)
25
20
15
10
5
0
LCA210L
Typical Load Current vs. Temperature
Temperature (°C)
Load Current (mA)
180
160
140
120
100
80
60
40
20
0-40 -20 0 20 40 60 80 120100
16mA
8mA
LCA210L
Typical Leakage vs. Temperature
(Measured across Pins 5 & 6 or 7 & 8)
Temperature (°C)
Leakage (µA)
-40
0.016
0.014
0.012
0.010
0.008
0.006
0.004
0.002
0-20 0 20 40 60 80 100
LCA210L
Typical Blocking Voltage
vs. Temperature
Temperature (°C)
Blocking Voltage (VRMS)
-40
430
425
420
415
410
405
400
395 -20 0 20 40 60 80 100
LCA210L
Typical Turn-On vs. Temperature
(Load Current = 40mADC)
Temperature (°C)
8mA
16mA
32mA
Turn-On (ms)
-40
5.000
4.500
4.000
3.500
3.000
2.500
2.000
1.500
1.000
0.500
0-20 0 20 40 60 80 100
LCA210L
Typical Turn-Off vs. Temperature
(Load Current = 40mADC)
Temperature (°C)
Turn-Off (ms)
-40
0.45
0.40
0.35
0.30
0.25
0.20
0.15
0.10
0.05
0-20 0 20 40 60 80 100
8mA
www.clare.com
4
LCA210L
Rev. 1.0
PERFORMANCE DATA*
*The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application
department.
LCA210L
Typical LED Forward Voltage Drop
vs. Temperature
Temperature (°C)
LED Forward Voltage Drop (V)
1.8
1.6
1.4
1.2
1.0
0.8-40 -20 0 20 40 60 80 120100
50mA
30mA
20mA
10mA
LCA210L
Typical Turn-On vs. LED Forward Current
(Load Current = 50mADC)
LED Forward Current (mA)
Turn-On (ms)
510 15 20 25 30 35 40 45
2.0
1.8
1.6
1.4
1.2
1.0
0.8
0.6
0.4
0.2
050 55
LCA210L
Typical Turn-Off vs. LED Forward Current
(Load Current = 50mADC)
LED Forward Current (mA)
Turn-Off (ms)
510 15 20 25 30 35 40 45
0.7
0.6
0.5
0.4
0.3
0.2
0.1
050 55
LCA210L
Typical On-Resistance vs. Temperature
(Load Current = Max Rated at Temperature)
Temperature (°C)
On-Resistance (Ω)
-40
60
50
40
30
20
10
0-20 0 20 40 60 80 100
8mA
16mA
LCA210L
Typical Load Current vs. Load Voltage
(Ambient Temperature = 25°C)
IF = 8mADC
Load Voltage (V)
Load Current (mA)
150
100
50
0
-50
-100
-150 -3 -2 -1 0 1 2 3
LCA210L
Energy Rating Curve
Time
Load Current (A)
10µs
1.0
0.9
0.8
0.7
0.6
0.5
0.4
0.3
0.2
0.1
01ms100µs 100ms 1s
10ms 10s 100s
LCA210L
Typical IF for Switch Operation
vs. Temperature
(Load Current = 50mADC)
Temperature (°C)
LED Current (mA)
-40
6.0
5.0
4.0
3.0
2.0
1.0
0-20 0 20 40 60 80 100
LCA210L
Typical IF for Switch Dropout
vs. Temperature
(Load Current = 50mADC)
Temperature (°C)
LED Current (mA)
-40
6.0
5.0
4.0
3.0
2.0
1.0
0-20 0 20 40 60 80 100
LCA210L
www.clare.com 5
Rev. 1.0
Dimensions
mm
(inches)
MECHANICAL DIMENSIONS
4.445 ± .127
(.175 ± .005)
3.302
(.130)
7.620 ± .254
(.300 ± .010)
6.350 ± .127
(.250 ± .005)
8.077 ± .127
(.318 ± .005)
2.540 ± .127
(.100 ± .005)
9.525 ± .254
(.375 ± .010)
.457 ± .076
(.018 ± .003)
.254 TYP.
(.010)
.635 TYP.
(.025)
8 Pin DIP Surface Mount (“S” Suffix) 9.652 ± .381
(.380 ± .015)
PC Board Pattern
(Top View)
6.350 ± .127
(.250 ± .005)
2.540 ± .127
(.100 ± .005)
7.620 ± .127
(.300 ± .005)
7.620 ± .127
(.300 ± .005)
8-.800 DIA.
(8-.031 DIA.)
7.239 TYP.
(.285)
3.302
(.130)
7.620 ± .254
(.300 ± .010)
9.144 TYP.
(.360)
6.350 ± .127
(.250 ± .005)
9.652 ± .381
(.380 ± .015)
2.540 ± .127
(.100 ± .005)
9.144 ± .508
(.360 ± .020)
.457 ± .076
(.018 ± .003)
8.077 ± .127
(.318 ± .005 )
8 Pin DIP Through Hole (Standard)
PC Board Pattern
(Top View) 2.540 ± .127
(.100 ± .005)
8.305 ± .127
(.327 ± .005)
1.905 ± .127
(.075 ± .005)
1.498 ± .127
(.059 ± .005)
Tape and Reel Packaging for 8 Pin Surface Mount Package
7.493 ± .102
(.295 ± .004)
12.090
(.476)
1.753 ± .102
(.069 ± .004)
3.987 ± .102
(.157 ± .004)
1.498 ± .102
(.059 ± .004)
6.731 MAX.
(.265)
.406 MAX.
(.016)
4.877
(.192)
Top Cover
Tape
2.007 ± .102
(.079 ± .004)
11.989 ± .102
(.472 ± .004)
User Direction of Feed
.050R TYP.
16.002 ± .305
(.630 ± .012)
10.300
(.405)
Embossment
Embossed Carrier
Top Cover
Tape Thickness
.102 MAX.
(.004)
10.300 ± .102
(.405 ± .004)
1.549 ± .102
(.061 ± .004)
330.2 DIA.
(13.00)
18
Clare, Inc. makes no representations or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications and product descriptions
at any time without notice. Neither circuit patent licenses nor indemnity are expressed or implied. Except as set forth in Clare’s Standard Terms and Conditions of Sale, Clare, Inc. assumes no liability whatsoever, and
disclaims any express or implied warranty, relating to its products including, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right.
The products described in this document are not designed, intended, authorized or warranted for use as components in systems intended for surgical implant into the body, or in other applications intended to sup-
port or sustain life, or where malfunction of Clare’s product may result in direct physical harm, injury, or death to a person or severe property or environmental damage. Clare, Inc. reserves the right to discontinue or
make changes to its products at any time without notice.
Specification: DS-LCA210L-R1.0
©Copyright 2002, Clare, Inc.
OptoMOS®is a registered trademark of Clare, Inc.
All rights reserved. Printed in USA.
6/21/02
For additional information please visit our website at: www.clare.com
