MOC223M Small Outline Optocouplers Darlington Output Features Description U.L. Recognized (File #E90700, Volume 2) The MOC223M consists of a gallium arsenide infrared emitting diode optically coupled to a monolithic silicon photodarlington detector, in a surface mountable, small outline, plastic package. It is ideally suited for high density applications, and eliminates the need for through the board mounting. VDE Recognized (File #136616) (add option "V" for VDE approval, i.e, MOC223VM) Industry Standard SOIC-8 Surface Mountable Package with 0.050" lead spacing High Current Transfer Ratio of 500% Minimum at IF = 1mA Standard SOIC-8 Footprint, with 0.050" Lead Spacing Compatible with Dual Wave, Vapor Phase and IR Reflow Soldering High Input-Output Isolation Voltage of 2500 VAC(rms) Guaranteed Applications Low power logic circuits Interfacing and coupling systems of different potentials and impedances Telecommunications equipment Portable electronics Solid state relays Schematic ANODE 1 CATHODE 2 Package Outline 8 N/C 7 BASE N/C 3 6 COLLECTOR N/C 4 5 EMITTER (c)2003 Fairchild Semiconductor Corporation MOC223M Rev. 1.0.2 www.fairchildsemi.com MOC223M -- Small Outline Optocouplers Darlington Output April 2009 Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be operable above the recommended operating conditions and stressing the parts to these levels is not recommended. In addition, extended exposure to stresses above the recommended operating conditions may affect device reliability. The absolute maximum ratings are stress ratings only. Symbol Rating Value Unit Forward Current - Continuous 60 mA Forward Current - Peak (PW = 100s, 120pps) 1.0 A VR Reverse Voltage 6.0 V PD LED Power Dissipation @ TA = 25C Derate above 25C 90 0.8 mW mW/C EMITTER IF IF (pk) DETECTOR VCEO Collector-Emitter Voltage 30 V VECO Emitter-Collector Voltage 7.0 V VCBO Collector-Base Voltage 70 V IC Collector Current-Continuous 150 mA PD Detector Power Dissipation @ TA = 25C Derate above 25C 150 1.76 mW mW/C Input-Output Isolation Voltage (f = 60Hz, t = 1 min.) 2500 Vac(rms) PD Total Device Power Dissipation @ TA = 25C Derate above 25C 250 2.94 mW mW/C TA Ambient Operating Temperature Range -40 to +100 C Storage Temperature Range -40 to +150 C TOTAL DEVICE VISO Tstg (c)2003 Fairchild Semiconductor Corporation MOC223M Rev. 1.0.2 www.fairchildsemi.com 2 MOC223M -- Small Outline Optocouplers Darlington Output Absolute Maximum Ratings (TA = 25C Unless otherwise specified) Symbol Parameter Test Conditions Min. Typ.* Max. Unit EMITTER VF Input Forward Voltage IF = 1.0mA 1.08 1.3 V IR Reverse Leakage Current VR = 6.0V 0.001 100 A CIN Input Capacitance 18 pF DETECTOR ICEO1 Collector-Emitter Dark Current VCE = 5.0 V, TA = 25C 10 A BVCEO Collector-Emitter Breakdown Voltage IC = 100A 30 100 V BVECO Emitter-Collector Breakdown Voltage IE = 100A 7.0 10 V CCE Collector-Emitter Capacitance f = 1.0 MHz, VCE = 0 5.5 pF ICEO2 1.0 VCE = 5.0 V, TA = 100C 50 nA COUPLED CTR Current Transfer Ratio(3) IF = 1.0mA, VCE = 5.0V 500 VISO Isolation Surge Voltage(1,2) f = 60Hz AC Peak, t = 1 min. 2500 Vac(rms) RISO Isolation Resistance(2) V = 500V 1011 Collector-Emitter Saturation Voltage IC = 500A, IF = 1.0mA Isolation Capacitance(2) VI-O = 0V, f = 1MHz 0.2 pF ton Turn-On Time IF = 5.0mA, VCC = 10V, RL = 100 (Fig. 6) 10 s toff Turn-Off Time IF = 5.0mA, VCC = 10V, RL = 100 (Fig. 6) 125 ns tr Rise Time IF = 5.0mA, VCC = 10V, RL = 100 (Fig. 6) 8 s tf Fall Time IF = 5.0mA, VCC = 10V, RL = 100 (Fig. 6) 110 s VCE (sat) CISO 1000 % 1.0 V *All typicals at TA = 25C Notes: 1. Isolation Surge Voltage, VISO, is an internal device dielectric breakdown rating. 2. For this test, Pins 1 and 2 are common and Pins 5, 6 and 7 are common. 3. Current Transfer Ratio (CTR) = IC / IF x 100%. (c)2003 Fairchild Semiconductor Corporation MOC223M Rev. 1.0.2 www.fairchildsemi.com 3 MOC223M -- Small Outline Optocouplers Darlington Output Electrical Characteristics (TA = 25C unless otherwise specified) Fig. 2 Output Curent vs. Input Current Fig. 1 LED Forward Voltage vs. Forward Current 1.8 I C - OUTPUT COLLECTOR CURRENT (NORMALIZED) 10 VF - FORWARD VOLTAGE (V) 1.7 1.6 1.5 1.4 TA = 55C 1.3 1.2 TA = 25C 1.1 TA = 100C 1.0 1 10 100 IF - LED FORWARD CURRENT (mA) 1 VCE = 5V NORMALIZED TO I F = 1mA 0.1 0.1 1 Fig. 3 Output Current vs. Ambient Temperature 10 100 Fig. 4 Output Current vs. Collector - Emitter Voltage 2.0 I C - OUTPUT COLLECTOR CURRENT (NORMALIZED) I C - OUTPUT COLLECTOR CURRENT (NORMALIZED) 10 IF - LED INPUT CURRENT (mA) 1 0.1 IF = 1mA, VCE = 5V NORMALIZED TO TA = 25oC 0.01 -80 -60 -40 -20 0 20 40 60 80 100 1.8 1.6 1.4 1.2 1.0 0.8 0.6 0.4 0.2 IF = 1mA NORMALIZED TO VCE = 5V 0.0 120 0 1 2 3 4 5 6 7 8 9 10 o TA - AMBIENT TEMPERATURE ( C) VCE - COLLECTOR -EMITTER VOLTAGE (V) Fig. 5 Dark Current vs. Ambient Temperature I CEO - COLLECTOR -EMITTER DARK CURRENT (nA) 10 5 10 4 VCE = 10V NORMALIZED TO TA= 25 oC 10 3 10 2 10 1 10 0 10 -1 10 -2 0 20 40 60 80 100 TA - AMBIENT TEMPERATURE (C) (c)2003 Fairchild Semiconductor Corporation MOC223M Rev. 1.0.2 www.fairchildsemi.com 4 MOC223M -- Small Outline Optocouplers Darlington Output Typical Performance Curves WAVE FORMS VCC = 10V INPUT PULSE IC IF INPUT RL 10% OUTPUT OUTPUT PULSE 90% RBE tr ton tf toff Figure 6. Switching Time Test Circuit and Waveform (c)2003 Fairchild Semiconductor Corporation MOC223M Rev. 1.0.2 www.fairchildsemi.com 5 MOC223M -- Small Outline Optocouplers Darlington Output TEST CIRCUIT 8-pin SOIC Surface Mount 8 0.164 (4.16) 0.144 (3.66) SEATING PLANE 1 0.202 (5.13) 0.182 (4.63) 0.010 (0.25) 0.006 (0.16) 0.143 (3.63) 0.123 (3.13) 0.021 (0.53) 0.011 (0.28) 0.008 (0.20) 0.003 (0.08) 0.244 (6.19) 0.224 (5.69) 0.050 (1.27) Typ. Lead Coplanarity: 0.004 (0.10) MAX Recommended Pad Layout 0.024 (0.61) 0.060 (1.52) 0.275 (6.99) 0.155 (3.94) 0.050 (1.27) Dimensions in inches (mm). Package drawings are provided as a service to customers considering Fairchild components. Drawings may change in any manner without notice. Please note the revision and/or date on the drawing and contact a Fairchild Semiconductor representative to verify or obtain the most recent revision. Package specifications do not expand the terms of Fairchild's worldwide terms and conditions, specifically the warranty therein, which covers Fairchild products. Always visit Fairchild Semiconductor's online packaging area for the most recent package drawings: http://www.fairchildsemi.com/packaging/ (c)2003 Fairchild Semiconductor Corporation MOC223M Rev. 1.0.2 www.fairchildsemi.com 6 MOC223M -- Small Outline Optocouplers Darlington Output Package Dimensions MOC223M -- Small Outline Optocouplers Darlington Output Ordering Information Option Order Entry Identifier V V R2 R2 R2V R2V Description VDE 0884 Tape and reel (2500 units per reel) VDE 0884, Tape and reel (2500 units per reel) Marking Information 1 223 V X YY S 3 4 2 6 5 Definitions 1 Fairchild logo 2 Device number 3 VDE mark (Note: Only appears on parts ordered with VDE option - See order entry table) 4 One digit year code, e.g., `3' 5 Two digit work week ranging from `01' to `53' 6 Assembly package code *Note - `V' option parts marked with date code `325' or earlier are marked in portrait format. (c)2003 Fairchild Semiconductor Corporation MOC223M Rev. 1.0.2 www.fairchildsemi.com 7 8.0 0.10 2.0 0.05 3.50 0.20 0.30 MAX O1.5 MIN 1.75 0.10 4.0 0.10 5.5 0.05 8.3 0.10 5.20 0.20 0.1 MAX 6.40 0.20 12.0 0.3 O1.5 0.1 User Direction of Feed Dimensions in mm (c)2003 Fairchild Semiconductor Corporation MOC223M Rev. 1.0.2 www.fairchildsemi.com 8 MOC223M -- Small Outline Optocouplers Darlington Output Carrier Tape Specifications MOC223M -- Small Outline Optocouplers Darlington Output Reflow Profile Temperature (C) TP 260 240 TL 220 200 180 160 140 120 100 80 60 40 20 0 Max. Ramp-up Rate = 3C/S Max. Ramp-down Rate = 6C/S tP Tsmax tL Preheat Area Tsmin ts 120 240 360 Time 25C to Peak Time (seconds) Profile Freature Pb-Free Assembly Profile Temperature Min. (Tsmin) 150C Temperature Max. (Tsmax) 200C Time (tS) from (Tsmin to Tsmax) 60-120 seconds Ramp-up Rate (tL to tP) 3C/second max. Liquidous Temperature (TL) 217C Time (tL) Maintained Above (TL) 60-150 seconds Peak Body Package Temperature 260C +0C / -5C Time (tP) within 5C of 260C 30 seconds Ramp-down Rate (TP to TL) 6C/second max. Time 25C to Peak Temperature (c)2003 Fairchild Semiconductor Corporation MOC223M Rev. 1.0.2 8 minutes max. www.fairchildsemi.com 9 Auto-SPMTM Build it NowTM CorePLUSTM CorePOWERTM CROSSVOLTTM CTLTM Current Transfer LogicTM EcoSPARK(R) EfficentMaxTM EZSWITCHTM* TM* (R) (R) Fairchild Fairchild Semiconductor(R) FACT Quiet SeriesTM FACT(R) (R) FAST FastvCoreTM FETBenchTM FlashWriter(R)* FPSTM F-PFSTM FRFET(R) SM Global Power Resource Green FPSTM Green FPSTM e-SeriesTM GmaxTM GTOTM IntelliMAXTM ISOPLANARTM MegaBuckTM MICROCOUPLERTM MicroFETTM MicroPakTM MillerDriveTM MotionMaxTM Motion-SPMTM OPTOLOGIC(R) OPTOPLANAR(R) (R) PDP SPMTM Power-SPMTM PowerTrench(R) PowerXSTM Programmable Active DroopTM QFET(R) QSTM Quiet SeriesTM RapidConfigureTM TM Saving our world, 1mW/W/kW at a timeTM SmartMaxTM SMART STARTTM SPM(R) STEALTHTM SuperFETTM SuperSOTTM-3 SuperSOTTM-6 SuperSOTTM-8 SupreMOSTM SyncFETTM Sync-LockTM (R) * The Power Franchise(R) TinyBoostTM TinyBuckTM TinyLogic(R) TINYOPTOTM TinyPowerTM TinyPWMTM TinyWireTM TriFault DetectTM TRUECURRENTTM* SerDesTM UHC(R) Ultra FRFETTM UniFETTM VCXTM VisualMaxTM XSTM * Trademarks of System General Corporation, used under license by Fairchild Semiconductor. DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION, OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. THESE SPECIFICATIONS DO NOT EXPAND THE TERMS OF FAIRCHILD'S WORLDWIDE TERMS AND CONDITIONS, SPECIFICALLY THE WARRANTY THEREIN, WHICH COVERS THESE PRODUCTS. LIFE SUPPORT POLICY FAIRCHILD'S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury of the user. 2. A critical component in any component of a life support, device, or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. ANTI-COUNTERFEITING POLICY Fairchild Semiconductor Corporation's Anti-Counterfeiting Policy. Fairchild's Anti-Counterfeiting Policy is also stated on our external website, www.fairchildsemi.com, under Sales Support. Counterfeiting of semiconductor parts is a growing problem in the industry. All manufacturers of semiconductor products are experiencing counterfeiting of their parts. Customers who inadvertently purchase counterfeit parts experience many problems such as loss of brand reputation, substandard performance, failed applications, and increased cost of production and manufacturing delays. Fairchild is taking strong measures to protect ourselves and our customers from the proliferation of counterfeit parts. Fairchild strongly encourages customers to purchase Fairchild parts either directly from Fairchild or from Authorized Fairchild Distributors who are listed by country on our web page cited above. Products customers buy either from Fairchild directly or from Authorized Fairchild Distributors are genuine parts, have full traceability, meet Fairchild's quality standards for handling and storage and provide access to Fairchild's full range of up-to-date technical and product information. Fairchild and our Authorized Distributors will stand behind all warranties and will appropriately address any warranty issues that may arise. Fairchild will not provide any warranty coverage or other assistance for parts bought from Unauthorized Sources. Fairchild is committed to combat this global problem and encourage our customers to do their part in stopping this practice by buying direct or from authorized distributors. PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet Identification Product Status Advance Information Formative / In Design Preliminary First Production No Identification Needed Full Production Obsolete Not In Production Definition Datasheet contains the design specifications for product development. Specifications may change in any manner without notice. Datasheet contains preliminary data; supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice to improve design. Datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice to improve the design. Datasheet contains specifications on a product that is discontinued by Fairchild Semiconductor. The datasheet is for reference information only. Rev. I40 (c)2003 Fairchild Semiconductor Corporation MOC223M Rev. 1.0.2 www.fairchildsemi.com 10 MOC223M -- Small Outline Optocouplers Darlington Output TRADEMARKS The following includes registered and unregistered trademarks and service marks, owned by Fairchild Semiconductor and/or its global subsidiaries, and is not intended to be an exhaustive list of all such trademarks.