AA4040VRBXZ1S/A-2A 4.0 x 4.0 mm Right Angle Surface Mount LED Lamp DESCRIPTIONS PACKAGE DIMENSIONS The source color devices are made with InGaN Light Emitting Diode Electrostatic discharge and power surge could damage the LEDs It is recommended to use a wrist band or anti-electrostatic glove when handling the LEDs All devices, equipments and machineries must be electrically grounded FEATURES Single color Suitable for all SMD assembly and solder process Available on tape and reel Ideal for backlighting Package: 500 pcs / reel Moisture sensitivity level: 2a RoHS compliant APPLICATIONS Traffic signaling Backlighting (illuminated advertising , general lighting) Interior and exterior automotive lighting Substitution of micro incandescent lamps Reading lamps Signal and symbol luminaire for orientation Marker lights (e.g. Steps, exit ways, etc) Decorative and entertainment lighting Indoor and outdoor commercial and residential architectural lighting RECOMMENDED SOLDERING PATTERN (units : mm; tolerance : 0.1) ATTENTION Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is 0.25(0.01") unless otherwise noted. 3. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. 4. The device has a single mounting surface. The device must be mounted according to the specifications. Observe precautions for handling electrostatic discharge sensitive devices SELECTION GUIDE Part Number AA4040VRBXZ1S/A-2A Emitting Color (Material) Blue (InGaN) Iv (mcd) @ 20mA [2] Viewing Angle [1] Code. Min. Max. T 700 1000 U 1000 1300 V 1300 1600 W 1600 1900 21/2 120 Notes: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. 2. Luminous intensity / luminous flux: +/-15%. 3. Luminous intensity value is traceable to CIE127-2007 standards. (c) 2017 Kingbright. All Rights Reserved. Spec No: DSAP1125 / 1201008976 Rev No: V.2B Date: 12/22/2017 Page 1 / 6 AA4040VRBXZ1S/A-2A ELECTRICAL / OPTICAL CHARACTERISTICS at TA=25C Parameter Symbol Emitting Color Chromaticity Coordinates x IF = 20mA x [1] Chromaticity Coordinates y IF = 20mA Value Unit Typ. Max. Blue 0.21 - - y [1] Blue 0.20 - - C Blue 100 - pF Forward Voltage IF = 20mA VF [2] Blue 3.3 4.0 V Reverse Current (VR = 5V) IR Blue - 50 uA Temperature Coefficient of x IF = 20mA, -10C T 100C TCx Blue -0.03 - 10-3/C Temperature Coefficient of y IF = 20mA, -10C T 100C TCy Blue -0.10 - 10-3/C Temperature Coefficient of VF IF = 20mA, -10C T 100C TCV Blue -2.0 - mV/C Capacitance Notes: 1. Measurement tolerance of the chromaticity coordinates is 0.01. 2. Forward voltage: 0.1V. 3. Excess driving current and / or operating temperature higher than recommended conditions may result in severe light degradation or premature failure. ABSOLUTE MAXIMUM RATINGS at TA=25C Parameter Symbol Value Unit Power Dissipation PD 120 mW Reverse Voltage VR 5 V Junction Temperature Tj 100 C Operating Temperature Top -40 to +100 C Storage Temperature Tstg -40 to +110 C DC Forward Current IF 30 mA IFM [1] 100 mA Electrostatic Discharge Threshold (HBM) - 8000 V Thermal Resistance (Junction / Ambient) Rth JA [2] 285 C/W Thermal Resistance (Junction / Solder point) Rth JS [2] 205 C/W Peak Forward Current Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. 2. Rt h JA ,Rt h JS Results from mounting on PC board FR4 (pad size 16 mm 2 per pad). 3. Relative humidity levels maintained between 40% and 60% in production area are recommended to avoid the build-up of static electricity - Ref JEDEC/JESD625-A and JEDEC/J-STD-033. (c) 2017 Kingbright. All Rights Reserved. Spec No: DSAP1125 / 1201008976 Rev No: V.2B Date: 12/22/2017 Page 2 / 6 AA4040VRBXZ1S/A-2A TECHNICAL DATA SPATIAL DISTRIBUTION 0 -15 Ta = 25 C 15 30 -30 45 -45 60 -60 75 -75 -90 1.0 0.5 0.0 90 1.0 0.5 BLUE 0.1 2.0 2.4 2.8 3.2 3.6 Forward voltage (V) 0.1 0.01 4.0 1 10 Forward current (mA) 100 40 30 20 10 0 2.5 2.0 at Ta = 25 C 1 1 50 Luminous Intensity vs. Ambient Temperature Luminous intensity normalised 10 Ta = 25 C at 20 mA Luminous intensity normalised Ta = 25 C Permissible forward current (mA) 10 100 Forward current (mA) Forward Current Derating Curve Luminous Intensity vs. Forward Current Forward Current vs. Forward Voltage 1.5 1.0 0.5 0.0 -40 -20 0 20 40 60 80 100 Ambient temperature (C) -40 -20 0 20 40 60 80 100 Ambient temperature (C) CIE CHROMATICITY DIAGRAM 0.28 0.26 BLB1 0.24 BLB1 0.22 y 0.20 BLB2 BLB2 BLB3 0.18 0.16 BLB3 0.14 0.12 0.14 0.16 0.18 0.20 0.22 0.24 0.26 0.28 x (c) 2017 Kingbright. All Rights Reserved. Spec No: DSAP1125 / 1201008976 Rev No: V.2B Date: 12/22/2017 x y 0.2123 0.2364 0.2053 0.2158 0.2240 0.2086 0.2310 0.2286 0.2053 0.2158 0.1985 0.1960 0.2173 0.1893 0.2240 0.2086 0.1985 0.1960 0.1920 0.1769 0.2109 0.1707 0.2173 0.1893 Notes: Shipment may contain more than one chromaticity regions. Orders for single chromaticity region are generally not accepted. Measurement tolerance of the chromaticity coordinates is 0.01. Page 3 / 6 AA4040VRBXZ1S/A-2A REFLOW SOLDERING PROFILE for LEAD-FREE SMD PROCESS TAPE SPECIFICATIONS (units : mm) REEL DIMENSION (units : mm) Notes: 1. Don't cause stress to the LEDs while it is exposed to high temperature. 2. The maximum number of reflow soldering passes is 2 times. 3. Reflow soldering is recommended. Other soldering methods are not recommended as they might cause damage to the product. HANDLING PRECAUTIONS Compare to epoxy encapsulant that is hard and brittle, silicone is softer and flexible. Although its characteristic significantly reduces thermal stress, it is more susceptible to damage by external mechanical force. As a result, special handling precautions need to be observed during assembly using silicone encapsulated LED products. Failure to comply might lead to damage and premature failure of the LED. 1. Handle the component along the side surfaces by using forceps or appropriate tools. 2. Do not directly touch or handle the silicone lens surface. It may damage the internal circuitry. 3. As silicone encapsulation is permeable to gases, some corrosive substances such as H2S might corrode silver plating of lead frame. Special care should be taken if an LED with silicone encapsulation is to be used near such substances. (c) 2017 Kingbright. All Rights Reserved. Spec No: DSAP1125 / 1201008976 Rev No: V.2B Date: 12/22/2017 Page 4 / 6 AA4040VRBXZ1S/A-2A RELIABILITY TEST ITEMS AND CONDITIONS The reliability of products shall be satisfied with items listed below LOT TOLERANCE PERCENT DEFECTIVE (LTPD) : 10% No. Test Item Standards Test Condition Test Times / Number of Cycles Damaged 1 Continuous operating test - Ta = 25C, IF = maximum rated current * 1,000 h 0 / 22 2 High Temp. operating test EIAJ ED-4701/100(101) Ta = 100C, IF = derated current at 100C 1,000 h 0 / 22 3 Low Temp. operating test - Ta = -40C, IF = maximum rated current * 1,000 h 0 / 22 4 High temp. storage test EIAJ ED-4701/100(201) Ta = maximum rated storage temperature 1,000 h 0 / 22 5 Low temp. storage test EIAJ ED-4701/100(202) Ta = -40C 1,000 h 0 / 22 6 High temp. & humidity storage test - Ta = 60C, RH = 90% 500 h 0 / 22 7 High temp. & humidity operating test - Ta = 60C, RH = 90% IF = derated current at 60C 500 h 0 / 22 8 Soldering reliability test EIAJ ED-4701/100(301) Moisture soak: 30C, 70% RH, 72h Preheat: 150~180C (120s max.) Soldering temp: 260C(10s) 2 times 0 / 18 9 Thermal shock operating test - Ta = -40C(15min) ~ 100C(15min) IF = derated current at 100C 1,000 cycles 0 / 22 10 Thermal shock test - Ta = -40C(15min) ~ 100C(15min) 1,000 cycles 0 / 22 11 Electric Static Discharge (ESD) EIAJ ED-4701/100(304) C = 100pF, R2 = 1.5K V = 8000V Once each Polarity 0 / 22 12 Vibration test - a = 196m/s, f = 100~2KHz, t = 48min for all xyz axes 4 times 0 / 22 * : Refer to forward current vs. derating curve diagram CRITERIA FOR JUDGING DAMAGE Items Symbols Conditions Failure Criteria luminous Intensity lV IF = 20mA Testing Min. Value < Spec. Min. Value x 0.5 Forward Voltage VF IF = 20mA Testing Max. Value Spec. Max. Value x 1.2 Reverse Current IR VR = Maximum Rated Reverse Voltage Testing Max. Value Spec. Max. Value x 2.5 High temp. storage test - - Occurrence of notable decoloration, deformation and cracking (c) 2017 Kingbright. All Rights Reserved. Spec No: DSAP1125 / 1201008976 Rev No: V.2B Date: 12/22/2017 Page 5 / 6 AA4040VRBXZ1S/A-2A PACKING & LABEL SPECIFICATIONS PRECAUTIONARY NOTES 1. The information included in this document reflects representative usage scenarios and is intended for technical reference only. 2. The part number, type, and specifications mentioned in this document are subject to future change and improvement without notice. Before production usage customer should refer to the latest datasheet for the updated specifications. 3. When using the products referenced in this document, please make sure the product is being operated within the environmental and electrical limits specified in the datasheet. If customer usage exceeds the specified limits, Kingbright will not be responsible for any subsequent issues. 4. The information in this document applies to typical usage in consumer electronics applications. If customer's application has special reliability requirements or have life-threatening liabilities, such as automotive or medical usage, please consult with Kingbright representative for further assistance. 5. The contents and information of this document may not be reproduced or re-transmitted without permission by Kingbright. 6. All design applications should refer to Kingbright application notes available at http://www.KingbrightUSA.com/ApplicationNotes (c) 2017 Kingbright. All Rights Reserved. Spec No: DSAP1125 / 1201008976 Rev No: V.2B Date: 12/22/2017 Page 6 / 6