6
OPERATING TEMPERATURE RANGE: -55°C to +125°C
TEMPERATURE COEFFICIENT: 0 ±15%∆°C MAX.
TEMPERATURE VOLTAGE COEFFICIENT: X7R not applicable
DISSIPATION FACTOR: For 50 volts and 100 volts: 2.5% MAX.;
For 25 volts: 3.0% MAX.; For 16 volts: 3.5% MAX.;
For 10 volts: 5.0% MAX.; For 6.3 volts: 10% MAX.
For values > 10µF and voltages ≤ 10V, the D.F. is 10% MAX.
INSULATION RESISTANCE:
>1000 ohms F or 100 G ohms, whichever is less at 25°C, VDCW.
(The IR at 125°C is 10% of the value at 25°C)
AGEING: 2.5% per decade hour, typical
WITHSTANDING VOLTAGE: >2.5 times VDCW
TEST PARAMETERS:* 1KHz ± 100Hz at 1.0 ± 0.2 Vrms > 100 pF, 25°C
CAPACITANCE TOLERANCE: J,K,M
X7R: SPECIFICATIONS:
-55°C
-15%
-10%
-5%
0%
5%
10%
15%
-25°C 0°C 25°C 50°C 75°C 100°C 125°C
Typical Capacitance Change vs. Temperature
OPERATING TEMPERATURE RANGE: +10°C to +85°C
TEMPERATURE COEFFICIENT: +22% - 56%∆°C MAX.
DISSIPATION FACTOR: 4.0% MAX.
INSULATION RESISTANCE: >100 ohms F or 10 G ohms, whichever is less at 25°C, VDCW.
AGEING: 5% per decade hour, typical
WITHSTANDING VOLTAGE: >2.5 times VDCW
TEST PARAMETERS: 1KHz ± 100Hz at 0.5 ± 0.1 Vrms, 25°C
CAPACITANCE TOLERANCE: M,Z
Z5U: SPECIFICATIONS:
-55°C
-80%
-60%
-40%
-20%
0%
20%
-25°C 0°C 25°C
Typical Capacitance Change vs. Temperature
50°C 75°C 100°C 125°C
OPERATING TEMPERATURE RANGE: -30°C to +85°C
TEMPERATURE COEFFICIENT: +22% - 82%∆°C MAX.
DISSIPATION FACTOR: For 25 volts and 50 volts: 5% MAX.;
For 16 volts: 7% MAX.; For 10 volts: 9% MAX.;
For 6.3 volts: 11% MAX.
For higher Cap values > 10µF, the D.F. is 20% MAX.
INSULATION RESISTANCE: >100 ohms F or 10 G ohms, whichever is less at 25°C, VDCW.
AGEING: 7% per decade hour, typical
WITHSTANDING VOLTAGE: >2.5 times VDCW
TEST PARAMETERS:* 1KHz ± 100Hz at 1.0 ± 0.2 Vrms, 25°C
CAPACITANCE TOLERANCE: M,Z
Y5V: SPECIFICATIONS:
-55°C
-100%
-60%
-80%
-40%
-20%
0%
40%
20%
-25°C 0°C 25°C
Typical Capacitance Change vs. Temperature
50°C 75°C 100°C 125°C
OPERATING TEMPERATURE RANGE: -55°C to +125°C
TEMPERATURE COEFFICIENT: 0 ±30PPM/°C
TEMPERATURE VOLTAGE COEFFICIENT: 0 ±30PPM/°C
DISSIPATION FACTOR: 0.1% MAX.
INSULATION RESISTANCE:
>1000 ohms F or 100 G ohms, whichever is less at 25°C, VDCW.
(The IR at 125°C is 10% of the value at 25°C)
AGEING: None
WITHSTANDING VOLTAGE: >2.5 times VDCW
TEST PARAMETERS: 1MHz ± 100KHz at 1.0 ± 0.2 Vrms ≤ 100 pF, 25°C
1KHz ± 100Hz at 1.0 ± 0.2 Vrms > 100 pF, 25°C
CAPACITANCE TOLERANCE: B,C,D,F,G,J,K
-55°C
-15%
-10%
-5%
0%
5%
10%
15%
-25°C 0°C 25°C 50°C 75°C 100°C 125°C
Typical Capacitance Change vs. Temperature
NP0/C0G: SPECIFICATIONS:
OPERATING TEMPERATURE RANGE: -55°C to +85°C
TEMPERATURE COEFFICIENT: 0 ±15%∆°C MAX.
TEMPERATURE VOLTAGE COEFFICIENT: X5R not applicable
DISSIPATION FACTOR: For 50 volts and 100 volts: 2.5% MAX.;
For 25 volts: 3.0% MAX.; For 16 volts: 3.5% MAX.;
For 10 volts: 5.0% MAX.; For 4.0 volts and 6.3 volts: 10% MAX.
For values > 10µF and voltages ≤ 10V, the D.F. is 10% MAX.
INSULATION RESISTANCE: >1000 ohms F or 100 G ohms, whichever is less
at 25°C, VDCW. (10,000 ohms at 125°C)
AGEING: 2.5% per decade hour, typical
WITHSTANDING VOLTAGE: >2.5 times VDCW
TEST PARAMETERS:* 1KHZ ± 100Hz at 1.0 ± 0.2 Vrms > 100 pF, 25°C
CAPACITANCE TOLERANCE: K,M
X5R: SPECIFICATIONS:
-55°C
-15%
-10%
-5%
0%
5%
10%
15%
-25°C 0°C 25°C 50°C 75°C 100°C 125°C
Typical Capacitance Change vs. Temperature
Multilayer chip capacitors have a low residual inductance, an excellent frequency
response and minimal stray capacitance since there are no leads. These characteristics
enable design to be very close to the theoretical values of the capacitors.
6
Ceramic Chip Capacitors
* Test parameters for Hi-Caps: X7R, X5R and Y5V
1KHz ± 100Hz at 1.0 ± 0.2 Vrms < 10uF (10 V min.)
1KHz ± 100Hz at 0.5 ± 0.1 Vrms < 10uF (6.3V max.)
120Hz ± 24Hz at 0.5 ± 0.1 Vrms ≥ 10uF
All components in this section are RoHS compliant per the EU directives and definitions.
SIZE A B W F E Po Pz D t P
0.25 ± 0.05 0.45 ± 0.05 8.0 ± 0.2 3.5 ± 0.1 1.75 ± 0.1 4.0 ± 0.1 2.0 ± 0.05 1.5 + 0.1 1.15 max 2.0 ± 0.05
01005 - 0.0
(0.010 ± .002) (0.018 ± .002) (.315 ± .008) (.138 ± .004) (.069 ± .004) (.157 ± .004) (.039 ± .002)
(
.064 + .004
)
(.045 max) (.079 ± .002)
- .000
0.37 ± 0.05 0.67 ± 0.05 8.0 ± 0.2 3.5 ± 0.1 1.75 ± 0.1 4.0 ± 0.1 2.0 ± 0.05 1.5 + 0.1 1.15 max 2.0 ± 0.05
0201 - 0.0
(0.014 ± .002) (0.026 ± .002) (.315 ± .008) (.138 ± .004) (.069 ± .004) (.157 ± .004) (.039 ± .002)
(
.064 + .004
)
(.045 max) (.079 ± .002)
- .000
0.65 ± 0.1 1.10 ± 0.2 8.0 ± 0.2 3.5 ± 0.1 1.75 ± 0.1 4.0 ± 0.1 2.0 ± 0.05 1.5 + 0.1 1.15 max 2.0 ± 0.05
0402 - 0.0
(.026 ± .004) (.043 ± .008) (.315 ± .008) (.138 ± .004) (.069 ± .004) (.157 ± .004) (.039 ± .002)
(
.064 + .004
)
(.045 max) (.079 ± .002)
- .000
1.10 ± 0.2 1.90 ± 0.2 8.0 ± 0.2 3.5 ± 0.1 1.75 ± 0.1 4.0 ± 0.1 2.0 ± 0.05 1.5 + 0.1 1.15 max 4.0 ± 0.1
0603 - 0.0
(.043 ± .008) (.075 ± .008) (.315 ± .008) (.138 ± .004) (.069 ± .004) (.157 ± .004) (.079 ± .002)
(
.064 + .004
)
(.045 max) (.157 ± .004)
- .000
1.16 ± 0.2 2.4 ± 0.2 8.0 ± 0.2 3.5 ± 0.1 1.75 ± 0.1 4.0 ± 0.1 2.0 ± 0.05 1.5 + 0.1 1.15 max 4.0 ± 0.1
0805 - 0.0
(.046 ± .008) (.095 ± .008) (.315 ± .008) (.138 ± .004) (.069 ± .004) (.157 ± .004) (.079 ± .002)
(
.064 + .004
)
(.045 max) (.157 ± .004)
- .000
2.0 ± 0.2 3.6 ± 0.2 8.0 ± 0.2 3.5 ± 0.1 1.75 ± 0.1 4.0 ± 0.1 2.0 ± 0.05 1.5 + 0.1 1.15 max 4.0 ± 0.1
1206 - 0.0
(.079 ± .008) (.142 ± .008) (.315 ± .008) (.138 ± .004) (.069 ± .004) (.157 ± .004) (.079 ± .002)
(
.064 + .004
)
(.045 max) (.157 ± .004)
- .000
Unit: mm (inch)
Paper Tape
Carrier
Dimensions
(8mm)
W
F
P
DIRECTION OF FEED
TOP TAPE
EMBOSSED
PAPER
CENTER
OF CAVITY
DT
To
Pz E
Po
10 PITCHES
CUMULATIVE
TOLERANCE
±0.008
(±0.2)
A
B
t
TAPE B min C A (7") A (13") D min N min G T max
8mm 0.3 13 ± .05 178 ± 2.0 330 ± 2.0 20.2 50 10 ± 1.5 14.9
(.012) (.512 ± .02) (7 ± .079) (13 ± .08) (.795) (1.97) (.394 ± .059) (.587)
12mm 0.3 13 ± .05 178 ± 2.0 330 ± 2.0 20.2 50 10 ± 1.5 14.9
(.012) (.512 ± .02) (7 ± .079) (13 ± .08) (.795) (1.97) (.394 ± .059) (.587)
Reel Dimensions Unit: mm (inch)
B
D
G
T
A
FULL RADIUS C
N
The following letters define thickness as signified below:
CODE: C D E F G H I J K L M N O P Q R S T 6
DIMENSION: .015 .020 .026 .030 .035 .040 .045 .050 .055 .060 .065 .070 .075 .080 .085 .090 .095 .100 .023
– * OPTIONAL IDENTIFIER
Min./Max. thickness
– designates minimum thickness
* designates maximum thickness
C0805 C0G 500 — 101 J N h P — *
Series Temperature Rated Voltage Capacitance Tolerance Code: Termination Marking** Packaging Optional Identifier
See Chart Characteristic 1st two digits (pico - Farads) *B = ± 0.1 pF N = Nickel Barrier, 6 = EIA “J” Code D = Paper Tape (10" Reel)
are significant 1st two digits *C = ± 0.25 pF Tinned Termination “Leave blank if E = Embossed Tape (7" Reel)
followed by are significant, *D = ± 0.5 pF Composition is No Marking” P = Paper Tape (7" Reel)
number of zeroes. followed by F = ± 1% 100% matte Tin (Sn) R = Paper Tape (13" Reel)
4R0 = 4.0 VDCW number of zeroes. G = ± 2% ‡ P = Palladium Silver U = Embossed Tape (13" Reel)
6R3 = 6.3 VDCW 101 = 100 pF J = ± 5% ‡ G = Gold over Nickel
100 = 10 VDCW R denotes decimal K = ± 10% Pb: 90% Tin (Sn)/10% Lead (Pb) Termination
160 = 16 VDCW 6R8 = 6.8 pF M = ± 20%
250 = 25 VDCW N = ± 30% Standard termination finish for this product is
500 = 50 VDCW Z = +80 - 20% 100% matte Tin (Sn). If a 100% Tin designation is
630 = 63 VDCW P = +100 - 0% required, replace the N with Sn.
101 = 100 VDCW * For capacitance values
201 = 200 VDCW below 10 pF only. 10pF
251 = 250 VDCW also available in D Tol.
How To Order
SIZE 01005 0201* 0402* 0603 0805 1206 1210 1812 2221
TAPE SIZE 8mm 8mm 8mm 8mm 8mm 8mm 8mm 12mm 12mm
MIN QTY 20,000† 15,000 5000 3000 2000 2000 1000 1000 1000
PER REEL
MAX QTY 20,000† 15,000 10,000 4000 5000 5000 5000 3000 1000
PER REEL
7 in. Reel Quantities**
* * Quantity dependent on Chip Thickness
* 0201 and 0402 Pitch (“P”) is .079" ± .004" (2.0 ± 0.1mm)
† Smaller quantities may be available. Please contact your sales person.
Taping
Specifications
SIZE A B W F E Po Pz D To T P
1.48 ± 0.2 2.3 ± 0.2 8.0 ± 0.2 3.5 ± .0.1 1.75 ± 0.1 4.0 ± 0.1 2.0 ± 0.05 1.5 + 0.1 2.5 max 0.6 max 4.0 ± 0.1
0805 - 0.0
(.058 ± .008) (.091 ± .008) (.315 ± .008) (.138 ± .004) (.069 ± .004) (.157 ± .004) (.079 ± .002)
(
.06 + .004
)
(.098 max) (.024 max) (.157 ± .004)
- .000
2.0 ± 0.2 3.6 ± 0.2 8.0 ± 0.2 3.5 ± .0.1 1.75 ± 0.1 4.0 ± 0.1 2.0 ± 0.05 1.5 + 0.1 2.5 max 0.6 max 4.0 ± 0.1
1206 - 0.0
(.079 ± .008) (.142 ± .008) (.315 ± .008) (.138 ± .004) (.069 ± .004) (.157 ± .004) (.079 ± .002)
(
.06 + .004
)
(.098 max) (.024 max) (.157 ± .004)
- .000
2.9 ± 0.2 3.6 ± 0.2 8.0 ± 0.2 3.5 ± .0.1 1.75 ± 0.1 4.0 ± 0.1 2.0 ± 0.05 1.5 + 0.1 2.5 max 0.6 max 4.0 ± 0.1
1210 - 0.0
(.114 ± .008) (.142 ± .008) (.315 ± .008) (.138 ± .004) (.069 ± .004) (.157 ± .004) (.079 ± .002)
(
.06 + .004
)
(.098 max) (.024 max) (.157 ± .004)
- .000
3.6 ± 0.2 4.9 ± 0.2 12.0 ± 0.3 5.6 ± .0.1 1.75 ± 0.1 4.0 ± 0.1 2.0 ± 0.05 1.5 + 0.1 3.8 max 0.6 max 8.0 ± 0.1
1812 - 0.0
(.142 ± .008) (.193 ± .008) (.472 ± .012) (.221 ± .004) (.069 ± .004) (.157 ± .004) (.079 ± .002)
(
.06 + .004
)
(.150 max) (.024 max) (.315 ± .004)
- .000
Embossed
Carrier
Dimensions
(8mm
& 12mm)
7
** 0201 and 0402
size capacitors
cannot be marked
Please Note: Venkel offers Engineering Kits for this product. See page 120 for details.
All tape and reel
specifications must
be adhered to per
EIA-481-1-A as
noted and stated in
the Chip Resistor
section on page 61.
‡ Pd/Ag & Gold terminations have limited values
available. Please consult your salesperson.
NOTE: See the Web site for soldering information. 0603 size and smaller are not recommended for wave soldering.
† See pages 20-21 for our standard High Voltage Ceramic Chip Capacitors.
8
Ceramic Chip Capacitors
NP0/C0G Dielectric
T
L
WEND
BAND
Values that are typically available.
25V Available in 25V only.
Note: * For additional values that may be available, please consult your salesperson.
(All measurements in inches)
Size 01005 (± 0.0008) 0201 (± 0.002) 0402 (± 0.004) 0504 (± 0.008) 0603 (± 0.006) 0805 (± 0.008) 1206 (± 0.008) 1210 (±0.008) 1812 (±0.012)
L.016 .024 .040 .053 .063 .080 .126 .126 .177
W.008 .012 .020 .040 .032 .050 .063 .098 .126
T (max)*.008 .012 .025 .040 .033 .055 .070 .075 .085
Min E/B .002 .002 .004 .005 .008 .020 ± .010 .020 ± .010 .020 ± .010 .024 ± .015
VDCW (MAX) 16V 25V 50V 25V 50V 50V 100V 50V 100V 25V 50V 100V 50V 100V 50V 100V 50V 100V
<--------------------------------------------------------------------------------------------------------CAP. CODE-------------------------------------------------------------------------------------------------------->
0R1
<--------------------------------------------------------------------------------------------------------CAP. VALUE------------------------------------------------------------------------------------------------------->
0.1pF
0R2 0.2pF
0R3 0.3pF
0R4 0.4pF
0R5 0.5pF
1R0 1.0pF
1R2 1.2
1R5 1.5
1R8 1.8
2R2 2.2
2R7 2.7
3R3 3.3
3R9 3.9
4R7 4.7
5R6 5.6
6R8 6.8
8R2 8.2
100 10pF
120 12
150 15
180 18
220 22
270 27
330 33
390 39
470 47
560 56
680 68
820 82
101 100pF
121 120
151 150
181 180
221 220
271 270
331 330
391 390
471 470
561 560
681 680
821 820
102
1000pF
122 1200
152 1500
182 1800
222 2200
272 2700
332 3300
2.03.04.05.06.07.08.09.0
* Values shown to the left are also available for 0201 size
2.03.04.05.06.07.08.09.0
* Values shown to the left are available for 01005 size
9
Ceramic Chip Capacitors
NP0/C0G Dielectric
Note:
Due to demand and raw material fluctuations in the market, changes and availability of individual values may occur. Minimum order quantities may apply.
T
L
WEND
BAND
Values that are typically available.
25V Available in 25V only.
(All measurements in inches)
Size 0201 (± 0.002) 0402 (± 0.004) 0504 (± 0.008) 0603 (± 0.006) 0805 (± 0.008) 1206 (± 0.008) 1210 (±0.008) 1812 (±0.012) 2220 / 2221 (±0.016)
L.024 .040 .053 .063 .080 .126 .126 .177 .225 / .225
W.012 .020 .040 .032 .050 .063 .098 .126 .200 / .210
T (max)*.012 .025 .040 .033 .055 .070 .075 .085 .108 /.108
Min E/B .002 .004 .005 .008 .020 ± .010 .020 ± .010 .020 ± .010 .024 ± .015 .025 ± .015
VDCW (MAX) 25V 25V 50V 50V 100V 25V 50V 25V 50V 100V 50V 100V 50V 100V 50V 100V 50V 100V
<--------------------------------------------------------------------------------------------CAP. CODE-------------------------------------------------------------------------------------------->
392
<--------------------------------------------------------------------------------------------CAP. VALUE------------------------------------------------------------------------------------------->
3900
472 4700
562 5600
682 6800
822 8200
103 .01µF
123 .012
153 .015
183 .018
223 .022
273 .027
333 .033
393 .039
473 .047
563 .056
683 .068
823 .082
104
.100µF
25V
124 .120
154 .150
184 .180
224 .220
274 .270
334 .330
394 .390
474 .470
564 .560
684 .680
824 .820
105
1.00µF
125 1.20
155 1.50
185 1.80
225 2.20
335 3.30
395 3.90
475 4.70
685 6.80
106
10.0µF
156
15.0µF
226
22.0µF
476
47.0µF
107
100.0µF
Ceramic Chip Capacitors
10
X7R Dielectric
* For values above 1uF, thickness may be greater than specified above.
T(max): 0603 – 0.048"
0805 – 0.075"
Note:
Due to demand and raw material fluctuations in the market, changes and availability of individual values may occur. Minimum order quantities may apply.
All components manufactured with the X7R dielectric are also available as an X5R dielectric.
T
L
WEND
BAND
Values that are typically available.
X5R Available in X5R only. See X5R chart on
page 14, for all values 1µF and above
(All measurements in inches)
Size 01005 (± 0.0008) 0201 (± 0.002) 0402 (± 0.004) 0504 (± 0.008) 0603 (± 0.006) 0805 (± 0.008)
L.016 .024 .040 .053 .063 .080
W.008 .012 .020 .040 .032 .050
T (max)*.008 .012 .025 .040 .035 .055
Min E/B .002 .002 .004 .005 .008 .020 ± .010
VDCW (MAX) 6.3V 6.3V 10V 16V 25V 16V 25V 50V 25V 50V 100V 10V 16V 25V 50V 100V 25V 50V 100V
<----------------------------------------------------------------------------------------------CAP. CODE---------------------------------------------------------------------------------------------->
101
<----------------------------------------------------------------------------------------------CAP. VALUE--------------------------------------------------------------------------------------------->
100pF
121 120
151 150
181 180
221 220
271 270
331 330
391 390
471 470
561 560
681 680
821 820
102
1000pF
X5R
122 1200
152 1500 X5R
182 1800
222 2200 X5R
272 2700
332 3300 X5R
392 3900
472 4700 X5R
562 5600
682 6800 X5R
822 8200
103 .01µF X5R
123 .012
153 .015 X5R
183 .018
223 .022 X5R
273 .027
333 .033 X5R
Ceramic Chip Capacitors
11
X7R Dielectric
* For values above 1uF, thickness may be greater than specified above.
T(max): 0603 – 0.048"
0805 – 0.075"
Note:
Due to demand and raw material fluctuations in the market, changes and availability of individual values may occur. Minimum order quantities may apply.
All components manufactured with the X7R dielectric are also available as an X5R dielectric.
T
L
WEND
BAND
Values that are typically available.
X5R Available in X5R only. See X5R chart on
page 14, for all values 1µF and above
(All measurements in inches)
Size 0201 (± 0.002) 0402 (± 0.004) 0603 (± 0.006) 0805 (± 0.008)
L.024 .040 .063 .080
W.012 .020 .032 .050
T (max)*.012 .025 .035 .055
Min E/B .002 .004 .008 .020 ± .010
VDCW (MAX) 4V 6.3V 10V 4V 6.3V 10V 16V 25V 6.3V 10V 16V 25V 50V 100V 6.3V 10V 16V 25V 50V 100V
<----------------------------------------------------------------------------------------------CAP. CODE------------------------------------------------------------------------------------------>
393
<----------------------------------------------------------------------------------------------CAP. VALUE------------------------------------------------------------------------------------------>
.039 X5R
473 .047 X5R
563 .056
683 .068
823 .082
104
.100µF
X5R
124 .120
154 .150 X5R X5R
184 .180
224 .220 X5R X5R X5R
274 .270
334 .330 X5R
394 .390
474 .470 X5R X5R
564 .560
684 .680 X5R X5R
824 .820
105
1.00µF
X5R X5R X5R X5R X5R
125 1.20
155 1.50
185 1.80
225 2.20 X5R X5R X5R
335 3.30 X5R X5R
475 4.70 X5R X5R X5R X5R X5R
685 6.80
106
10.0µF
X5R X5R X5R
156
15.0µF
226
22.0µF
476
47.0µF
107
100.0µF
Ceramic Chip Capacitors
X7R Dielectric
* For values above 1uF, thickness may be greater than specified above.
T(max): 1206 – 0.110" 1812 – 0.130"
1210 – 0.125" 2220 – 0.135"
Note:
Due to demand and raw material fluctuations in the market, changes and availability of individual values may occur. Minimum order quantities may apply.
All components manufactured with the X7R dielectric are also available as an X5R dielectric.
T
L
WEND
BAND
Values that are typically available.
X5R Available in X5R only. See X5R chart on
page 14, for all values 1µF and above
(All measurements in inches)
Size 1206 (± 0.008) 1210 (±0.008) 1812 (±0.012) 2220 / 2221 (±0.016)
L.126 .126 .177 .225 / .225
W.063 .098 .126 .200 / .210
T (max)*.070 .075 .085 .108 /.108
Min E/B .020 ± .010 .020 ± .010 .024 ± .015 .025 ± .015
VDCW (MAX) 10V 16V 25V 50V 100V 10V 16V 25V 50V 100V 6.3V 10V 16V 25V 50V 100V 16V 25V 50V 100V
<----------------------------------------------------------------------------------------------CAP. CODE---------------------------------------------------------------------------------------------->
102
<----------------------------------------------------------------------------------------------CAP. VALUE--------------------------------------------------------------------------------------------->
1000pF
122 1200
152 1500
182 1800
222 2200
272 2700
332 3300
392 3900
472 4700
562 5600
682 6800
822 8200
103 .01µF
123 .012
153 .015
183 .018
223 .022
273 .027
333 .033
393 .039
473 .047
563 .056
683 .068
823 .082
104
.100µF
124 .120
154 .150
184 .180
224 .220
274 .270
334 .330
12
Ceramic Chip Capacitors
13
X7R Dielectric
* For values above 1uF, thickness may be greater than specified above.
T(max): 1206 – 0.110" 1812 – 0.130"
1210 – 0.125" 2220 – 0.135"
Note:
Due to demand and raw material fluctuations in the market, changes and availability of individual values may occur. Minimum order quantities may apply.
All components manufactured with the X7R dielectric are also available as an X5R dielectric.
T
L
WEND
BAND
Values that are typically available.
X5R Available in X5R only. See X5R chart on
page 14, for all values 1µF and above
(All measurements in inches)
Size 1206 (± 0.008) 1210 (±0.008) 1812 (±0.012) 2220 / 2221 (±0.016)
L.126 .126 .177 .225 / .225
W.063 .098 .126 .200 / .210
T (max)*.070 .075 .085 .108 /.108
Min E/B .020 ± .010 .020 ± .010 .024 ± .015 .025 ± .015
VDCW (MAX) 6.3V 10V 16V 25V 50V 100V 6.3V 10V 16V 25V 50V 100V 6.3V 10V 16V 25V 50V 100V 16V 25V 50V 100V
<-----------------------------------------------------CAP. CODE-------------------------------------------------->
394
<-----------------------------------------------------CAP. VALUE-------------------------------------------------->
.390
474 .470
564 .560
684 .680
824 .820
105
1.00µF
125 1.20
155 1.50
185 1.80
225 2.20
335 3.30
475 4.70
685 6.80
106
10.0µF
X5R X5R X5R
156
15.0µF
X5R
226
22.0µF
X5R X5R X5R
476
47.0µF
X5R X5R X5R
107
100.0µF
Ceramic Chip Capacitors
14
X5R Dielectric (1µF and above)
Note:
Due to demand and raw material fluctuations in the market, changes and availability of individual values may occur. Minimum order quantities may apply.
All components manufactured with the X7R dielectric are also available as an X5R dielectric.
T
L
WEND
BAND
Values that are typically available.
For values less than 1µF, see X7R chart on
pages 10–13.
(All measurements in
inches)
Size 0201
(± 0.002)
0402
(± 0.004)
0603
(± 0.006)
0805
(± 0.008)
1206
(± 0.008)
1210
(±0.008)
1812
(±0.012)
L.024 .040 .063 .080 .126 .126 .177
W.012 .020 .032 .050 .063 .098 .126
T (max) .012 .025 .048 .075 .110 .125 .130
Min E/B .002 .004 .008 .020 ± .010 .020 ± .010 .020 ± .010 .024 ± .015
VDCW (MAX) 4V 6.3V 4V 6.3V 10V 4V 6.3V 10V 16V 25V 6.3V 10V 16V 25V 6.3V 10V 16V 25V 6.3V 10V 16V 25V 6.3V 10V 16V
<------------CAP. CODE----------->
105
<------------CAP. VALUE----------->
1.00µF
125 1.20
155 1.50
185 1.80
225 2.20
335 3.30
Ceramic Chip Capacitors
15
X5R Dielectric (1µF and above)
Note:
Due to demand and raw material fluctuations in the market, changes and availability of individual values may occur. Minimum order quantities may apply.
All components manufactured with the X7R dielectric are also available as an X5R dielectric.
T
L
WEND
BAND
Values that are typically available.
For values less than 1µF, see X7R chart on
pages 10–13.
(All measurements in inches)
Size 0402
(± 0.004)
0603
(± 0.006)
0805
(± 0.008)
1206
(± 0.008)
1210
(±0.008)
1812
(±0.012)
2220 / 2221
(±0.016)
L.040 .063 .080 .126 .126 .177 .225 / .225
W.020 .032 .050 .063 .098 .126 .200 / .210
T (max) .025 .048 .075 .110 .125 .130 .135
Min E/B .004 .008 .020 ± .010 .020 ± .010 .020 ± .010 .024 ± .015 .025 ± .015
VDCW (MAX) 4V 6.3V 4V 6.3V 10V 4V 6.3V 10V 16V 25V 6.3V 10V 16V 25V 6.3V 10V 16V 25V 6.3V 10V 16V 25V 6.3V 10V 25V 50V
<-----------------CAP. CODE----------------->
395
<-----------------CAP. VALUE----------------->
3.90
475 4.70
685 6.80
106
10.0µF
156
15.0µF
226
22.0µF
476
47.0µF
107
100.0µF
Ceramic Chip Capacitors
16
Z5U Dielectric
Note:
Due to demand and raw material fluctuations in the market, changes and availability of individual values may occur. Minimum order quantities may apply.
T
L
WEND
BAND
Values that are typically available.
(All measurements in inches)
Size 0504 (± 0.008) 0603 (± 0.006) 0805 (± 0.008) 1206 (± 0.008) 1210 (±0.008) 1812 (±0.012) 2220 / 2221 (±0.016)
L.050 .063 .080 .126 .126 .177 .225 / .225
W.040 .032 .050 .063 .098 .126 .200 / .210
T (max)*.040 .033 .055 .070 .075 .085 .108 /.108
Min E/B .005 .008 .020 ± .010 .020 ± .010 .020 ± .010 .024 ± .015 .025 ± .015
VDCW (MAX) 25V 50V 25V 50V 25V 50V 25V 50V 25V 50V 25V 50V 25V 50V
<----------------------------------------------------------------------------------------------CAP. CODE---------------------------------------------------------------------------------------------->
102
<----------------------------------------------------------------------------------------------CAP. VALUE--------------------------------------------------------------------------------------------->
1000pF
122 1200
152 1500
182 1800
222 2200
272 2700
332 3300
392 3900
472 4700
562 5600
682 6800
822 8200
103 .01µF
123 .012
153 .015
183 .018
223 .022
273 .027
333 .033
393 .039
473 .047
563 .056
683 .068
823 .082
104
.100µF
124 .120
154 .150
184 .180
224 .220
274 .270
334 .330
Ceramic Chip Capacitors
17
Z5U Dielectric
Note:
Due to demand and raw material fluctuations in the market, changes and availability of individual values may occur. Minimum order quantities may apply.
* For values above 1uF, thickness may be greater than specified above.
T
L
WEND
BAND
Values that are typically available.
(All measurements in inches)
Size 0504 (± 0.008) 0603 (± 0.006) 0805 (± 0.008) 1206 (± 0.008) 1210 (±0.008) 1812 (±0.012) 2220 / 2221 (±0.016)
L.050 .063 .080 .126 .126 .177 .225 / .225
W.040 .032 .050 .063 .098 .126 .200 / .210
T (max)*.040 .033 .055 .070 .075 .085 .108 /.108
Min E/B .005 .008 .020 ± .010 .020 ± .010 .020 ± .010 .024 ± .015 .025 ± .015
VDCW (MAX) 25V 50V 25V 50V 25V 50V 25V 50V 25V 50V 25V 50V 25V 50V
<-------------------------------------------------------CAP. CODE----------------------------------------------------->
394
<-------------------------------------------------------CAP. VALUE----------------------------------------------------->
.390
474 .470
564 .560
684 .680
824 .820
105
1.00µF
125 1.20
155 1.50
185 1.80
225 2.20
335 3.30
395 3.90
475 4.70
685 6.80
106
10.0µF
156
15.0µF
226
22.0µF
476
47.0µF
107
100.0µF
Ceramic Chip Capacitors
18
Y5V Dielectric
Note:
Due to demand and raw material fluctuations in the market, changes and availability of individual values may occur. Minimum order quantities may apply.
T
L
WEND
BAND
Values that are typically available.
(All measurements in inches)
Size 0201
(± 0.002) 0402 (± 0.004) 0603 (± 0.006) 0805 (± 0.008) 1206 (± 0.008) 1210 (±0.008) 1812 (±0.012)
L.024 .040 .063 .080 .126 .126 .177
W.012 .020 .032 .050 .063 .098 .126
T (max)*.012 .025 .033 .055 .070 .075 .085
Min E/B .002 .004 .008 .020 ± .010 .020 ± .010 .020 ± .010 .024 ± .015
VDCW (MAX)
10V 6.3V 10V 16V 25V 50V 6.3V 10V 16V 25V 50V 6.3V 10V 16V 25V 50V 10V 16V 25V 50V 6.3V 10V 16V 25V 6.3V 10V 25V
<----------------------------------------------------------------------------------------------CAP. CODE--------------------------------------------------------------------------------------------->
102
<----------------------------------------------------------------------------------------------CAP. VALUE--------------------------------------------------------------------------------------------->
1000pF
122 1200
152 1500
182 1800
222 2200
272 2700
332 3300
392 3900
472 4700
562 5600
682 6800
822 8200
103 .01µF
123 .012
153 .015
183 .018
223 .022
273 .027
333 .033
393 .039
473 .047
563 .056
683 .068
823 .082
104
.100µF
124 .120
154 .150
184 .180
224 .220
274 .270
334 .330
Ceramic Chip Capacitors
19
Y5V Dielectric
Note:
Due to demand and raw material fluctuations in the market, changes and availability of individual values may occur. Minimum order quantities may apply.
* For values above 1uF, thickness may be greater than specified above.
T
L
WEND
BAND
Values that are typically available.
All components in this section are RoHS compliant per the EU directives and definitions.
(All measurements in inches)
Size 0201
(± 0.002) 0402 (± 0.004) 0603 (± 0.006) 0805 (± 0.008) 1206 (± 0.008) 1210 (±0.008) 1812 (±0.012)
L.024 .040 .063 .080 .126 .126 .177
W.012 .020 .032 .050 .063 .098 .126
T (max)*.012 .025 .033 .055 .070 .075 .085
Min E/B .002 .004 .008 .020 ± .010 .020 ± .010 .020 ± .010 .024 ± .015
VDCW (MAX)
10V 6.3V 10V 16V 6.3V 10V 16V 25V 50V 6.3V 10V 16V 25V 50V 10V 16V 25V 50V 6.3V 10V 16V 25V 50V 6.3V 10V 25V
<------------------------------------------------------CAP. CODE------------------------------------------------------>
394
<------------------------------------------------------CAP. VALUE------------------------------------------------------>
.390
474 .470
564 .560
684 .680
824 .820
105
1.00µF
125 1.20
155 1.50
185 1.80
225 2.20
335 3.30
395 3.90
475 4.70
685 6.80
106
10.0µF
156
15.0µF
226
22.0µF
476
47.0µF
107
100.0µF
