EVERLIGHT ELECTRONICS CO., LTD. MODEL NO: 15-22SURSYGC/S530-A2/TR8 Chip LEDs with Bi-Color(Multi-Color) Device Number DSE-152-042 REV. 1.0 Page: 1/9 ECN Features Package Dimension z Package in 8mm tape on 7" diameter reel. z Compatible with automatic placement equipment. z Compatible with infrared and vapor phase reflow solder process. z Multi-color type. + SYG SUR Description z The 15-22 SMD Taping is much smaller than leaded components, thus enable smaller board size, higher packing density, reduced storage space and finally smaller equipment to be obtained. z Besides, lightweight makes them ideal for miniature application, etc. Applications Notes z Automotive: backlighting in dashboard and switch. z Telecommunication: indicator and backlighting in telephone and fax. z Flat backlight for LCD, switch and symbol. z General use. PART NO 15-22SURSYGC/S530-A2/TR8 DESIGNER CHECKER Tolerances Unless Dimension 0.1mm Angle0.5 CHIP Material Emitted Color Lens Color AlGaInP Hyper Red Water clear AlGaInP Super Yellow Green APPROVER Office : NO 25,Lane.76,Chung Yang Rd.,Sec.3, Tucheng, Taipei 236,Taiwan, R.O.C. TEL : 886-2-2267-2000,2266-9936(22 Lines) FAX : 886-2-2267-6189 http://www.everlight.com EVERLIGHT ELECTRONICS CO., LTD. MODEL NO: 15-22SURSYGC/S530-A2/TR8 Chip LEDs with Bi-Color(Multi-Color) Device Number ECN Package Dimension Loaded quantity per reel 2000 pcs/reel DSE-152-042 REV. 1.0 Page: 2/9 EVERLIGHT ELECTRONICS CO., LTD. MODEL NO: 15-22SURSYGC/S530-A2/TR8 Chip LEDs with Bi-Color(Multi-Color) Device Number DSE-152-042 REV. 1.0 Page: 3/9 ECN Absolute Maximum Ratings at Ta = 25 Parameter Symbol Rating Unit Reverse Voltage Vr 5 V Forward Current If Operating Temperature Topr -40 ~ +85 Storage Temperature Tstg -40 ~ +90 Soldering Temperature Tsol 260 (for 5 second) Electrostatic Discharge ESD 2000 V Power Dissipation Pd SUR: 60 SYG: 60 mW Peak Forward Current(Duty 1/10 @ 1KHZ) If(Peak) SUR: 160 SYG: 160 mA SUR: SYG: 25 25 mA Reliability Test Item And Condition NO Item Test Conditions 1 Solder Heat TEMP : 260 5 H : +85 30min 5 min L : -55 30min H : +100 5min 10 sec L : -10 5min Test Sample Hours/Cycle Size Ac/Re 5 SEC 76 Pcs 0/1 50 CYCLE 76 Pcs 0/1 50 CYCLE 76 Pcs 0/1 2 Temperature Cycle 3 Thermal Shock 4 High Temperature Storage TEMP : 100 1000 HRS 76 Pcs 0/1 5 Low Temperature Storage TEMP : -55 1000 HRS 76 Pcs 0/1 6 DC Operating Life High Temperature / High Humidity If = 20 Ma 1000 HRS 76 Pcs 0/1 85/85% RH 1000 HRS 76 Pcs 0/1 7 EVERLIGHT ELECTRONICS CO., LTD. MODEL NO: 15-22SURSYGC/S530-A2/TR8 Chip LEDs with Bi-Color(Multi-Color) Device Number DSE-152-042 REV. 1.0 Page: 4/9 ECN Electronic Optical Characteristics : Parameter Luminous intensity Symbol Min. SUR: Iv SYG: Peak Dominant d Wavelength Forward Vf Reverse Current If=2mA mcd If=20mA 15 ----- 140 ----- deg If=20mA ----- 632 575 ----- nm If=20mA ----- 624 573 ----- nm If=20mA ----- 20 20 ----- nm If=20mA ----- 2.0 2.0 2.4 2.4 V If=20mA ----- ----- 10 A Vr=5V SUR: SUR: SUR: SUR: SYG: Ir mcd 10 SYG: Voltage ----- SYG: SYG: Spectrum Radiation Bandwidth Condition 36 SYG: Wavelength 1 Unit 15 21/2 p 2 Max. SUR: Viewing Angle ----- Typ. ----- EVERLIGHT ELECTRONICS CO., LTD. MODEL NO: 15-22SURSYGC/S530-A2/TR8 Chip LEDs with Bi-Color(Multi-Color) Device Number ECN Typical Electro-Optical Characteristic Curves SUR DSE-152-042 REV. 1.0 Page: 5/9 EVERLIGHT ELECTRONICS CO., LTD. MODEL NO: 15-22SURSYGC/S530-A2/TR8 Chip LEDs with Bi-Color(Multi-Color) Device Number ECN Typical Electro-Optical Characteristic Curves SYG DSE-152-042 REV. 1.0 Page: 6/9 EVERLIGHT ELECTRONICS CO., LTD. MODEL NO: 15-22SURSYGC/S530-A2/TR8 Chip LEDs with Bi-Color(Multi-Color) Device Number ECN DSE-152-042 REV. 1.0 Page: 7/9 Test Circuit Precautions For Use 1. Over-current-proof Customer must apply resistors for protection , otherwise slight voltage shift will cause big current change ( Burn out will happen ). 2. Storage time 2.1 The operation of temperature and R.H. are : 5~35, R.H.60%. 2.2 Once the package is opened , the products should be used within a week. Otherwise , they should be keep in a dampproof box with desiccants. Considering the tape life , we suggest our customers to use our products within a year(from production date). 2.3 If opened more than one week in an atmosphere 5~35, R.H.60%, they should be treated at 605for 15hrs. 2.4 When you discover that the desiccant in the package has a pink color (normal=blue) , you should treat them in the same conditions as 2.3. EVERLIGHT ELECTRONICS CO., LTD. MODEL NO: 15-22SURSYGC/S530-A2/TR8 Chip LEDs with Bi-Color(Multi-Color) Device Number ECN DSE-152-042 REV. 1.0 Page: 8/9 Soldering heat reliability ( DIP ) Please refer to the following figure : Soldering Iron Basic spec is 5 sec when 260.If temperature is higher, time should be shorter (+10 -1sec). Power dissipation of iron should be smaller than 15 W , and temperature should be controllable.Surface temperature of the device should be under 230 . Rework 1. Customer must finish rework within 5 sec under 260. 2. Copper foil can not be touched by the head of iron. 3. Twin-head type is preferred. x EVERLIGHT ELECTRONICS CO., LTD. MODEL NO: 15-22SURSYGC/S530-A2/TR8 Chip LEDs with Bi-Color(Multi-Color) Device Number ECN Reflow Temp / Time to rise preheat cooling DSE-152-042 REV. 1.0 Page: 9/9 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Everlight: 15-22SURSYGC/S530-A2/TR8