D
C
B
A
C
B
1
3
45
678
12
34
56
78
2
THE INFORMATION CONTAINED IN THIS DRAWING IS CONFIDENTIAL AND MAY NOT BE
DISCLOSED WITHOUT WRITTEN CONSENT FROM SOURIAU USA, INC.
THIS DRAWING IS A CONTROLLED DOCUMENT FOR SOURIAU USA, INC.
IT IS SUBJECT TO CHANGE WITHOUT NOTIFICATION.
CONTACT THE DOCUMENT CONTROL CENTER FOR THE LATEST REVISION.
DWG. NO.
B
C
A
6.350
[161.29]
2X .330
[8.38]
.175
[4.45]
2X R.175
4.45[ ]
.004 [0.1] A B C
2X .148
3.76[ ]
.320
2X MIN.
[8.13]
.740 MAX.
[18.80]
6.750 MAX.
[171.45]
6.100 MAX.
[154.94]
.370 MAX.
[9.40]
.1225#.0075
[3.112#0.191]
.025 [0.63]
F REVISED PER ECN 12046 RSK
08-22-13
SDH
08-22-13
E REVISED PER ECN 7622 JRD
09-23-02
SDH
09-23-02
REV DESCRIPTION BY
DATE
CHKD
DATE
ANGLES #1$
#.010 [#0.25]THREE PLACES
#.02 [#0.5]TWO PLACES
#.1 [#3]ONE PLACE
INCH [mm]
No. OF PLACES
TOLERANCES
UNLESS OTHERWISE SPECIFIED
THIRD ANGLE PROJECTION
LINEAR
MEASURE:
SE95203
1 OF 2
WWW.SOURIAU.COM
INTERPRET THIS DRAWING IN ACCORDANCE
WITH ASME Y14.5M - 1994.
F
SE95203
REVDRAWING NO.
CUSTOMER
DRAWING SCALE: 5:1
07-16-13
QC : BB
APPROVAL
07-16-13
MFG : DH
03-01-03
DSGN : FDH
07-16-13
CHKD : SDH
SIZE: D
CAGE NO: 09922
07-16-13
DRAWN: RSK
RBGP48-116_ (SEE TABLE)
CAT NO.
GROUND BLOCK, RACK AND PANEL MOUNTING
DRAWING TITLE
NOTES: SEE SHEET 2
48X GROUNDING SOCKET CONTACT
CUSTOMER PART NO.,
SOURIAU CATALOG NO.,
CAGE NO., DATE CODE,
AND NAME INK STAMPED,
COLOR WHITE.
CATALOG NO. RBGP48-116N SHOWN
CONTACT AND WIRE
SHOWN FOR ILLUSTRATION
PIN CONTACT CURRENT
BEARING SURFACE
TYP. GROUNDING RIVET WITH
PROTECTIVE COATING
FULL VIEW
SCALE 2:1
D
C
B
A
C
B
1
3
45
678
12
34
56
78
2
THE INFORMATION CONTAINED IN THIS DRAWING IS CONFIDENTIAL AND MAY NOT BE
DISCLOSED WITHOUT WRITTEN CONSENT FROM SOURIAU USA, INC.
THIS DRAWING IS A CONTROLLED DOCUMENT FOR SOURIAU USA, INC.
IT IS SUBJECT TO CHANGE WITHOUT NOTIFICATION.
CONTACT THE DOCUMENT CONTROL CENTER FOR THE LATEST REVISION.
DWG. NO.
CATALOG NO. DESCRIPTION TABLE
CATALOG NO. CUSTOMER PART NO. GROUNDING PLATE FINISH
RBGP48-116 --- CHROMATE CONVERSION COATED PER MIL-C-81706, CLASS 3,
METHOD C, COLOR GOLD [REF: ALODINE 1200]
RBGP48-116N S280W601-116 NICKEL PLATED PER MIL-C-26074, CLASS 3, GRADE B,
(500 MICROINCHES [12.7 MICRONS] MIN.)
ANGLES #1$
#.010 [#0.25]THREE PLACES
#.02 [#0.5]TWO PLACES
#.1 [#3]ONE PLACE
INCH [mm]
No. OF PLACES
TOLERANCES
UNLESS OTHERWISE SPECIFIED
THIRD ANGLE PROJECTION
LINEAR
MEASURE:
SE95203
2 OF 2
WWW.SOURIAU.COM
INTERPRET THIS DRAWING IN ACCORDANCE
WITH ASME Y14.5M - 1994.
F
SE95203
REVDRAWING NO.
CUSTOMER
DRAWING SCALE: 4:1
07-16-13
QC : BB
APPROVAL
07-16-13
MFG : DH
03-01-03
DSGN : FDH
07-16-13
CHKD : SDH
SIZE: D
CAGE NO: 09922
07-16-13
DRAWN: RSK
RBGP48-116_ (SEE TABLE)
CAT NO.
GROUND BLOCK, RACK AND PANEL MOUNTING
DRAWING TITLE
MECHANICAL:
MAGNETIC PERMEABILITY: ALL MATERIALS DO NOT EXHIBIT A RELATIVE MAGNETIC
PERMEABILITY OF GREATER THAN 2 IN ACCORDANCE
WITH MIL-STD-1344, METHOD 3006.
MAITENANCE AGING: IN ACCORDANCE WITH MIL-STD-1344, METHOD 2002.
CONTACT INSERTION FORCES: 10 LBS [44.4N] MAX., IN ACCORDANCE WITH
MIL-STD-1344, METHOD 2002.
CONTACT SEPARATION FORCES: 2.0 OZ [0.56N] MIN., IN ACCORDANCE WITH
S280W601, PARA. 4.6 17.
CONTACT RETENTION: 20 LBS [88.9N] MIN., IN ACCORDANCE WITH
MIL-STD-1344, METHOD 2007. AXIAL DISPLACEMENT DOES
NOT EXCEED .012 [0.30].
PROBE DAMAGE: IN ACCORDANCE WITH S280W601, PARA. 4.6.12.
INTERNAL CONTACT DURABILITY: 100 CYCLES OF MATING AND UNMATING TO DEPTH OF
MECHANICAL AND ELECTRICAL ENGAGEMENT
IN ACCORDANCE WITH S280W601, PARA. 4.6.13.
OVERSIZE PIN CONTACT PROTECTION: GROUND BLOCK DESIGNED TO PREVENT ENTRANCE
OF AN OVERSIZE TEST PIN OF .077 [1.78]
IN ACCORDANCE WITH S280W601, PARA. 4.6.15.
CONTACT WALKOUT: IN ACCORDANCE WITH S280W601, PARA. 4.6.16.
ENVIRONMENTAL:
SALT SPRAY: 48 HOURS IN ACCORDANCE WITH MIL-STD-1344, METHOD 1001,
TEST CONDITION B.
VIBRATION (RANDOM): IN ACCORDANCE WITH MIL-STD-1344, METHOD 2005,
TEST CONDITION V, LETTER E.
MECHANICAL (IMPACT) SHOCK: IN ACCORDANCE WITH MIL-STD-1344, METHOD 2004,
TEST CONDITION A.
THERMAL SHOCK: IN ACCORDANCE WITH MIL-STD-1344, METHOD 1003,
TEST CONDITION A, EXCEPT STEPS 2 AND 4 ARE 2 MINUTES
MAX. DURATION. TEMPERATURE EXTREMES FOR STEPS 1 AND 3 ARE -65$C +0$/-5$C
TO +125$C +5$/0$C [-85$F +0$/-9$F TO +257$F +9$
/0$F].
TEMPERATURE LIFE: 125$C +5$/0$C [+257$F +9$/0$F] FOR 1000 HOURS IN ACCORDANCE WITH
S280W601, PARA. 4.6.10.
ELECTRICAL:
CONTACT RESISTANCE: IN ACCORDANCE WITH: MIL-STD-1344, METHOD 3004.
SIZE 16-20: 45 MILLIVOLTS MAX., AT 7.5 AMPS WITH
20 AWG SILVER PLATED WIRE.
LOW LEVEL CONTACT RESISTANCE: IN ACCORDANCE WITH MIL-STD-1344, METHOD 3002.
SIZE 16-20: .009 OHMS MAX., WITH 20 AWG SILVER PLATED WIRE.
VOLTAGE STABILITY: 4 MILLIVOLT MAX. DIFFERENCE BETWEEN RECORDED HIGHEST
AND LOWEST POTENTIAL DROP VALUES IN ACCORDANCE WITH
S208W601, PARA. 4.6.14.
NOTES: UNLESS OTHERWISE SPECIFIED
1. GROUNDING BLOCK ACCOMMODATES PIN CONTACTS PER MIL-C-39029/1-101,
WITH A WIRE RANGE OF 24-22-20 AWG.
USE INSERTION/REMOVAL TOOL PER MIL-I-81969/14C-11.
MATERIAL:
STRAIN RELIEF GROMMET: SILICONE RUBBER, COLOR RED.
GROMMET BONDING: EPOXY
GROUNDING MODULE BODY: GLASS FORTIFIED THERMOPLASTIC
UL94V-0, COLOR BLUE
GROUNDING PLATE: ALUMINUM ALLOY PER QQ-A-200
GROUNDING RIVETS: ALUMINUM ALLOY.
GROUNDING SOCKET CONTACTS: BERYLLIUM COPPER.
CONTACT RETENTION CLIPS: BERYLLIUM COPPER.
SOCKET CONTACT SLEEVES: THERMOPLASTIC, LIQUID CRYSTAL POLYMER.
PROTECTIVE COATING: POLYURETHANE, COLOR OPTIONAL.
FINISH:
GROUNDING PLATE: SEE TABLE.
GROUNDING SOCKET CONTACTS: 50 MICRO INCHES [1.27 MICRONS] MIN.
NICKEL ALL OVER, PIN CONTACT
CURRENT BEARING SURFACE OVER PLATED
WITH 50 MICROINCES [1.27 MICRONS]
MIN. HARD GOLD.
ESTIMATED CONNECTOR WEIGHT: 40 GRAMS [1.41 OZ]
PERFORMANCE CHARACTERISTICS