PIC16HV540-04/P - Microchip Technology

 2003 Microchip Technology Inc. DS80158B-page 1

MPIC16HV540

The PIC16HV540 parts you have received conform

functionally to the Device Data Sheet (DS40197B),

except for the anomalies described below.

None.

PIC16HV540 Data Sheet Errata

PIC16HV540

DS80158B-page 2  2003 Microchip Technology Inc.

Clarifications/Corrections to the Data

Sheet:

In the Device Data Sheet (DS40197B), the following

clarifications and corrections should be noted.

1. Module: PORTB

1. Page 19, Section 5.2 PORTB of DS40197B has an

error in the text. The Text reads: Only pins configured

as inputs can cause this wake-up on pin change to

occur.

The corrected text should read: Only pins RB<0:3>

when configured as inputs can cause this wake-up on

pin change to occur.

Note: RB7 will always wake-up the device if

driven to a logic 1 during SLEEP mode.

This will happen if RB7 is configured as an

input or output.

 2003 Microchip Technology Inc. DS80158B-page 3

PIC16HV540

2. Module: DC Characteristics

Table 10.1, Regulation Voltage, Max. changes

from 6 to 6.5, as shown in bold below.

TABLE 10-1: DC CHARACTERISTICS: PIC16HV540-04, 20 (COMMERCIAL)

PIC16HV540-04I, 20I (INDUSTRIAL)

DC Characteristics

Power Supply Pins

Standard Operating Conditions (unless otherwise specified)

Operating Temperature 0°C ≤ TA ≤ +70°C (commercial)

-40°C ≤ TA ≤ +85°C (industrial)

Characteristic Sym. Min. Typ(1) Max. Units Conditions

Supply Voltage VDD 3.5

4.5 —

LP, XT and RC modes

HS mode

RAM Data Retention Voltage(2) VDR — 1.5* — V Device in SLEEP mode

VDD start voltage to ensure

Power-on Reset

VPOR —VSS — V See section on Power-on Reset for details

VDD rise rate to ensure

Power-on Reset

SVDD 0.05

VDD

V/ms See Section 7.4 for details on

Power-on Reset

Supply Current(3)

HS option

XT and RC(4) options

LP option

IDD

—

1.8

300

3.3

500

µA

FOSC = 20 MHz, VDD = 15V, VREG = 5V

FOSC = 4 MHz, VDD = 15V, VREG = 5V

FOSC = 32 kHz, VDD = 15V, VREG = 5V,

WDT disabled

Power-down Current(5)(6) IPD

—

4.5

0.25

1.8

1.4

µA

VDD = 15V, VREG = 5V SLEEP timer enable,

BOD disabled

VDD = 15V, VREG = 3V SLEEP timer enable,

BOD disabled

VDD = 15V, VREG = 5V SLEEP timer disabled,

BOD disabled

VDD = 15V, VREG = 3V SLEEP timer disabled,

BOD disabled

Brown-out Current — 0.5 — µA VDD = 15V, VREG = 5V, BOD enabled

Brown-out Detector Threshold BVDD 2.7

1.8

3.1

2.2

4.2

2.8

VDD = 15V, VREG = 5V* (7)

VDD = 15V, VREG = 3V* (7)

Regulation Voltage VIO 2

4.5

6.5

VDD = 15V, VREG = 3V, Unloaded outputs,

SLEEP

VDD = 15V, VREG = 5V, Unloaded outputs,

SLEEP

* These parameters are characterized but not tested.

Note 1: Data in the Typical (“Typ”) column is based on characterization results at 25°C. This data is for design guidance only

and is not tested.

2: This is the limit to which VDD can be lowered in SLEEP mode without losing RAM data.

3: The supply current is mainly a function of the operating voltage and frequency. Other factors such as bus loading, oscil-

lator type, bus rate, internal code execution pattern, and temperature also have an impact on the current consumption.

a) The test conditions for all IDD measurements in active operation mode are:

OSC1 = external square wave, from rail-to-rail; all I/O pins tristated, pulled to

VSS, T0CKI = VDD, MCLR = VDD; WDT enabled/disabled as specified.

b) For standby current measurements, the conditions are the same, except that

the device is in SLEEP mode.

4: Does not include current through REXT. The current through the resistor can be estimated by the

formula: IR = VDD/2REXT (mA) with REXT in kΩ.

5: The power down current in SLEEP mode does not depend on the oscillator type. Power-down current is measured with

the part in SLEEP mode, with all I/O pins in hi-impedance state and tied to VDD and VSS.

6: The oscillator start-up time can be as much as 8 seconds for XT and LP oscillator selection, if the SLEEP mode is exited

or during initial power-up.

7: See Section 7.6.1 for additional information.

PIC16HV540

DS80158B-page 4  2003 Microchip Technology Inc.

REVISION HISTORY

Rev A Document (6/2003)

Added Item 2 to the Clarification/Corrections to the

Data Sheet Section, changing max. of Regulation

Voltage from 6 to 6.5.

Rev B Document (6/2003)

Previous errata, DS80123A was combined with this

errata. Error in text, Section 5.2, PORTB of the data

sheet.

 2003 Microchip Technology Inc. DS80158B-page 5

Information contained in this publication regarding device

applications and the like is intended through suggestion only

and may be superseded by updates. It is your responsibility to

ensure that your application meets with your specifications.

No representation or warranty is given and no liability is

assumed by Microchip Technology Incorporated with respect

to the accuracy or use of such information, or infringement of

patents or other intellectual property rights arising from such

use or otherwise. Use of Microchip’s products as critical

components in life support systems is not authorized except

with express written approval by Microchip. No licenses are

conveyed, implicitly or otherwise, under any intellectual

property rights.

Trademarks

The Microchip name and logo, the Microchip logo, KEELOQ,

MPLAB, PIC, PICmicro, PICSTART, PRO MATE and

PowerSmart are registered trademarks of Microchip

Technology Incorporated in the U.S.A. and other countries.

FilterLab, microID, MXDEV, MXLAB, PICMASTER, SEEVAL

and The Embedded Control Solutions Company are

registered trademarks of Microchip Technology Incorporated

in the U.S.A.

Accuron, Application Maestro, dsPIC, dsPICDEM,

dsPICDEM.net, ECONOMONITOR, FanSense, FlexROM,

fuzzyLAB, In-Circuit Serial Programming, ICSP, ICEPIC,

microPort, Migratable Memory, MPASM, MPLIB, MPLINK,

MPSIM, PICC, PICkit, PICDEM, PICDEM.net, PowerCal,

PowerInfo, PowerMate, PowerTool, rfLAB, rfPIC, Select

Mode, SmartSensor, SmartShunt, SmartTel and Total

Endurance are trademarks of Microchip Technology

Incorporated in the U.S.A. and other countries.

Serialized Quick Turn Programming (SQTP) is a service mark

of Microchip Technology Incorporated in the U.S.A.

All other trademarks mentioned herein are property of their

respective companies.

Printed on recycled paper.

Note the following details of the code protection feature on Microchip devices:

• Microchip products meet the specification contained in their particular Microchip Data Sheet.

• Microchip believes that its family of products is one of the most secure families of its kind on the market today, when used in the

intended manner and under normal conditions.

• There are dishonest and possibly illegal methods used to breach the code protection feature. All of these methods, to our

knowledge, require using the Microchip products in a manner outside the operating specifications contained in Microchip's Data

Sheets. Most likely, the person doing so is engaged in theft of intellectual property.

• Microchip is willing to work with the customer who is concerned about the integrity of their code.

• Neither Microchip nor any other semiconductor manufacturer can guarantee the security of their code. Code protection does not

mean that we are guaranteeing the product as “unbreakable.”

Code protection is constantly evolving. We at Microchip are committed to continuously improving the code protection features of our

products. Attempts to break microchip’s code protection feature may be a violation of the Digital Millennium Copyright Act. If such acts

allow unauthorized access to your software or other copyrighted work, you may have a right to sue for relief under that Act.

Microchip received QS-9000 quality system

certification for its worldwide headquarters,

design and wafer fabrication facilities in

Chandler and Tempe, Arizona in July 1999

and Mountain View, California in March 2002.

The Company’s quality system processes and

procedures are QS-9000 compliant for its

PICmicro® 8-bit MCUs, KEELOQ® code hopping

devices, Serial EEPROMs, microperipherals,

non-volatile memory and analog products. In

addition, Microchip’s quality system for the

design and manufacture of development

systems is ISO 9001 certified.

DS80158B-page 6  2003 Microchip Technology Inc.

AMERICAS

Corporate Office

2355 West Chandler Blvd.

Chandler, AZ 85224-6199

Tel: 480-792-7200 Fax: 480-792-7277

Technical Support: 480-792-7627

Web Address: http://www.microchip.com

Atlanta

3780 Mansell Road, Suite 130

Alpharetta, GA 30022

Tel: 770-640-0034 Fax: 770-640-0307

Boston

2 Lan Drive, Suite 120

Westford, MA 01886

Tel: 978-692-3848 Fax: 978-692-3821

Chicago

333 Pierce Road, Suite 180

Itasca, IL 60143

Tel: 630-285-0071 Fax: 630-285-0075

Dallas

4570 Westgrove Drive, Suite 160

Addison, TX 75001

Tel: 972-818-7423 Fax: 972-818-2924

Detroit

Tri-Atria Office Building

32255 Northwestern Highway, Suite 190

Farmington Hills, MI 48334

Tel: 248-538-2250 Fax: 248-538-2260

Kokomo

2767 S. Albright Road

Kokomo, IN 46902

Tel: 765-864-8360 Fax: 765-864-8387

Los Angeles

18201 Von Karman, Suite 1090

Irvine, CA 92612

Tel: 949-263-1888 Fax: 949-263-1338

Phoenix

2355 West Chandler Blvd.

Chandler, AZ 85224-6199

Tel: 480-792-7966 Fax: 480-792-4338

San Jose

Microchip Technology Inc.

2107 North First Street, Suite 590

San Jose, CA 95131

Tel: 408-436-7950 Fax: 408-436-7955

Toronto

6285 Northam Drive, Suite 108

Mississauga, Ontario L4V 1X5, Canada

Tel: 905-673-0699 Fax: 905-673-6509

ASIA/PACIFIC

Australia

Microchip Technology Australia Pty Ltd

Marketing Support Division

Suite 22, 41 Rawson Street

Epping 2121, NSW

Australia

Tel: 61-2-9868-6733 Fax: 61-2-9868-6755

China - Beijing

Microchip Technology Consulting (Shanghai)

Co., Ltd., Beijing Liaison Office

Unit 915

Bei Hai Wan Tai Bldg.

No. 6 Chaoyangmen Beidajie

Beijing, 100027, No. China

Tel: 86-10-85282100 Fax: 86-10-85282104

China - Chengdu

Microchip Technology Consulting (Shanghai)

Co., Ltd., Chengdu Liaison Office

Rm. 2401-2402, 24th Floor,

Ming Xing Financial Tower

No. 88 TIDU Street

Chengdu 610016, China

Tel: 86-28-86766200 Fax: 86-28-86766599

China - Fuzhou

Microchip Technology Consulting (Shanghai)

Co., Ltd., Fuzhou Liaison Office

Unit 28F, World Trade Plaza

No. 71 Wusi Road

Fuzhou 350001, China

Tel: 86-591-7503506 Fax: 86-591-7503521

China - Hong Kong SAR

Microchip Technology Hongkong Ltd.

Unit 901-6, Tower 2, Metroplaza

223 Hing Fong Road

Kwai Fong, N.T., Hong Kong

Tel: 852-2401-1200 Fax: 852-2401-3431

China - Shanghai

Microchip Technology Consulting (Shanghai)

Co., Ltd.

Room 701, Bldg. B

Far East International Plaza

No. 317 Xian Xia Road

Shanghai, 200051

Tel: 86-21-6275-5700 Fax: 86-21-6275-5060

China - Shenzhen

Microchip Technology Consulting (Shanghai)

Co., Ltd., Shenzhen Liaison Office

Rm. 1812, 18/F, Building A, United Plaza

No. 5022 Binhe Road, Futian District

Shenzhen 518033, China

Tel: 86-755-82901380 Fax: 86-755-82966626

China - Qingdao

Rm. B505A, Fullhope Plaza,

No. 12 Hong Kong Central Rd.

Qingdao 266071, China

Tel: 86-532-5027355 Fax: 86-532-5027205

India

Microchip Technology Inc.

India Liaison Office

Marketing Support Division

Divyasree Chambers

1 Floor, Wing A (A3/A4)

No. 11, O’Shaugnessey Road

Bangalore, 560 025, India

Tel: 91-80-2290061 Fax: 91-80-2290062

Japan

Microchip Technology Japan K.K.

Benex S-1 6F

3-18-20, Shinyokohama

Kohoku-Ku, Yokohama-shi

Kanagawa, 222-0033, Japan

Tel: 81-45-471- 6166 Fax: 81-45-471-6122

Korea

Microchip Technology Korea

168-1, Youngbo Bldg. 3 Floor

Samsung-Dong, Kangnam-Ku

Seoul, Korea 135-882

Tel: 82-2-554-7200 Fax: 82-2-558-5934

Singapore

Microchip Technology Singapore Pte Ltd.

200 Middle Road

#07-02 Prime Centre

Singapore, 188980

Tel: 65-6334-8870 Fax: 65-6334-8850

Taiwan

Microchip Technology (Barbados) Inc.,

Taiwan Branch

11F-3, No. 207

Tung Hua North Road

Taipei, 105, Taiwan

Tel: 886-2-2717-7175 Fax: 886-2-2545-0139

EUROPE

Austria

Microchip Technology Austria GmbH

Durisolstrasse 2

A-4600 Wels

Austria

Tel: 43-7242-2244-399

Fax: 43-7242-2244-393

Denmark

Microchip Technology Nordic ApS

Regus Business Centre

Lautrup hoj 1-3

Ballerup DK-2750 Denmark

Tel: 45-4420-9895 Fax: 45-4420-9910

France

Microchip Technology SARL

Parc d’Activite du Moulin de Massy

43 Rue du Saule Trapu

Batiment A - ler Etage

91300 Massy, France

Tel: 33-1-69-53-63-20 Fax: 33-1-69-30-90-79

Germany

Microchip Technology GmbH

Steinheilstrasse 10

D-85737 Ismaning, Germany

Tel: 49-89-627-144-0

Fax: 49-89-627-144-44

Italy

Microchip Technology SRL

Via Quasimodo, 12

20025 Legnano (MI)

Milan, Italy

Tel: 39-0331-742611 Fax: 39-0331-466781

United Kingdom

Microchip Ltd.

505 Eskdale Road

Winnersh Triangle

Wokingham

Berkshire, England RG41 5TU

Tel: 44-118-921-5869 Fax: 44-118-921-5820

03/25/03

WORLDWIDE SALES AND SERVICE