108-98011 Rev. C
Telecom-, Signal and RF Relays
Reed V23100-V4 Relay
AXICOM
Telecom-, Signal and RF Relays
AXICOM
Reed V23100-V4 Relay
108-98011 • Nov. 07 Rev. C • ECOC: JM10
108-98011 Rev. C
All specications subject to change. Consult Tyco Electronics for latest specications. 2 of 13
Telecom-, Signal and RF Relays
Reed V23100-V4 Relay
AXICOM
Index
Relay Types 3
DIP Version (at) 4
DIP Version (high) 6
SIL Version 8
Mini SIL Version 10
Contact Data 11
Insulation 11
General Data 11
High Frequency Data 11
File No. E 111441
Disclaimer
While Tyco Electronics has made every reasonable effort
to ensure the accuracy of the information in this datasheet,
Tyco Electronics does not guarantee that it is error-free,
nor does Tyco Electronics make any other representati-
on, warranty or guarantee that the information is accurate,
correct, reliable or current. Tyco Electronics reserves the
right to make any adjustments to the information contai-
ned herein at any time without notice. Tyco Electronics
expressly disclaims all implied warranties (and all express
warranties, except as otherwise stated in this datasheet)
regarding the information contained herein, including but
not limited to any implied warranties or merchantability or
tness for a particular purpose. It is recommended that
you test any new or replacement product before incorpo-
rating into a system.
The dimensions in this datasheet are for reference purpo-
se only and are subject to change without notice. Speci-
cations are subject to change without notice.
108-98011 Rev. C
All specications subject to change. Consult Tyco Electronics for latest specications. 3 of 13
Telecom-, Signal and RF Relays
Reed V23100-V4 Relay
AXICOM
1 and 2 pole relays
non-polarized, non-latching
ROHS compliant (Directive 2002/95/EC) as per product
date code 0501.
Features
• Direct coil control with TTL-signals possible
• Highly reliable switching
• High switching rates
• Ultrasonic cleanable
• High vibration and shock resistance
Relay Types
DIP version (flat)
• Standard version
• Electrostatic shield
between coil and contact
• Protective diode
• Electrostatic shield and protective diode
• Contact arrangement:
1 form a (1 normally open contact) or
1 form c (1 changeover contact)
DIP version (high)
• Standard version
• Electrostatic shield
between coil and contact
• Protective diode
• Electrostatic shield and protective diode
• Contact arrangement:
2 form a (2 normally open contacts) or
1 form c (1 changeover contact)
SIL version
• Standard version
• Protective diode
• Contact arrangement:
1 form a (1 normally open contact)
Mini SIL version
• Standard version
• Protective diode
• Standard internal magnetic shield
• Contact arrangement:
1 form a (1 normally open contact)
Typical applications
• Incircuit tester
• Measuring and control systems
• Telecom equipment
• Alarm and security equipment
108-98011 Rev. C
All specications subject to change. Consult Tyco Electronics for latest specications. 4 of 13
Telecom-, Signal and RF Relays
Reed V23100-V4 Relay
AXICOM
1 form a
with electrostatic
shield and diode
A011
1 form a
standard
A000
1 form a
with diode
A010
1 form c
standard
C000
1 form a
with electrostatic
shield
A001
1 2 6 7
1413 9 8
Dimensions Dimensions in mm
DIP flat version
mm inch
L
W
H
19.30
-
0.2
6.40
-
0.2
5.70
-
0.2
0.760
-
0.008
0.252
-
0.008
0.224
-
0.008
Hb
T
Tw
Tz
5.10
-
0.2
3.20 ± 0.1
0.50 ± 0.1
0.25 ± 0.1
0.201
-
0.008
0.126 ± 0.004
0.020 ± 0.004
0.010 ± 0.004
Mounting hole layout
Top view
Terminal assignment
Top view
DIP version (flat)
108-98011 Rev. C
All specications subject to change. Consult Tyco Electronics for latest specications. 5 of 13
Telecom-, Signal and RF Relays
Reed V23100-V4 Relay
AXICOM
Coil Data (values at 23 °C) Ordering Information
Relay Code
Digit
Basic type number
of DIL/SIL reed relay
Contact arrangement
0 = DIL: 1 form A
3 = DIL: 2 form A or 1 form C
5 = SIL: 1 form A
6 = Mini SIL: 1 form A
Coil number
05 = 5 Vdc coil
12 = 12 Vdc coil
15 = 15 Vdc coil
24 = 24 Vdc coil
Relay version (contact arrangement)
Ordering example: V23100-V4005-A010 DIL reed relay with 1 make, 5 V nominal voltage, with clamping diode (spark suppression)
Nominal
voltage
Unom
Operate/set voltage range Release/
reset voltage
Minimum
Coil
power
Coil
Resistance
Relay
code
Tyco part
number
Minimum
voltage Umin
Maximum
voltage Umax
Vdc Vdc Vdc Vdc mW Ω / ± 10 %
DIP version flat: 1 form a contact, standard
5 3.5 22 0.75 50 500 V23100-V4005-A000 1393763-1
12 8.4 33 1.80 144 1000 V23100-V4012-A000 1393763-6
15 10.5 44 2.25 112 2000 V23100-V4015-A000 1-1393763-0
24 16.8 44 3.60 288 2000 V23100-V4024-A000 1-1393763-4
DIP version flat: 1 form a contact, with diode
5 3.5 14 0.75 50 500 V23100-V4005-A010 1393763-4
12 8.4 25 1.80 144 1000 V23100-V4012-A010 1393763-8
15 10.5 47 2.25 112 2000 V23100-V4015-A010 1-1393763-2
24 16.8 47 3.60 288 2000 V23100-V4024-A010 1-1393763-6
DIP version flat: 1 form c contact, standard
5 3.5 13 (14.5)* 0.75 125 200 V23100-V4305-C000 2-1393763-0
12 8.4 22 (23.5)* 1.80 288 500 V23100-V4312-C000 2-1393763-8
15 10.5 44 (14.5)* 2.25 112 2000 V23100-V4315-C000 3-1393763-4
24 16.8 44 (49.0)* 3.60 288 2000 V23100-V4324-C000 4-1393763-0
DIP version flat: 1 form a contact, with electrostatic shield
5 3.5 22 0.75 50 500 V23100-V4005-A001 1393763-3
12 8.4 33 1.80 144 1000 V23100-V4012-A001 1393763-7
15 10.5 44 2.25 112 2000 V23100-V4015-A001 1-1393763-1
24 16.8 44 3.60 288 2000 V23100-V4024-A001 1-1393763-5
DIP version flat: 1 form a contact, with electrostatic shield and diode
5 3.5 14 0.75 50 200 V23100-V4005-A011 1393763-3
12 8.4 25 1.80 144 1000 V23100-V4012-A011 1393763-9
15 10.5 47 2.25 112 2000 V23100-V4015-A011 1-1393763-3
24 16.8 47 3.60 288 2000 V23100-V4024-A011 1-1393763-7
* Values in brackets refer to high relay with protective diode
Block 1 Block 2 Block 3
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
V 2 3 1 0 0 - V 4
108-98011 Rev. C
All specications subject to change. Consult Tyco Electronics for latest specications. 6 of 13
Telecom-, Signal and RF Relays
Reed V23100-V4 Relay
AXICOM
DIP-high version
mm inch
L
W
H
19.30
-
0.2
7.00
-
0.2
7.50
-
0.2
0.760
-
0.008
0.276
-
0.008
0.295
-
0.008
S
T
Tw
Tz
0.50 ± 0.1
3.20 ± 0.1
0.50 ± 0.1
0.25 ± 0.1
0.200 ± 0.004
0.126 ± 0.004
0.020 ± 0.004
0.010 ± 0.004
Dimensions Dimensions in mm
Mounting hole layout
Top view
Terminal assignment
Top view
DIP version (high)
2 form a
with diode
B010
2 form a
standard
B000
1 form c
with diode
C010
1 form c
with electrostatic
shield and diode
C011
108-98011 Rev. C
All specications subject to change. Consult Tyco Electronics for latest specications. 7 of 13
Telecom-, Signal and RF Relays
Reed V23100-V4 Relay
AXICOM
Coil Data (values at 23 °C) Ordering Information
Nominal
voltage
Unom
Operate/set voltage range Release/
reset voltage
Minimum
Coil
power
Coil
Resistance
Relay
code
Tyco part
number
Minimum
voltage Umin
Maximum
voltage Umax
Vdc Vdc Vdc Vdc mW Ω / ± 10 %
DIP version high: 2 form a contact, standard
5 3.5 14 0.75 125 200 V23100-V4305-B000 1-1393763-8
12 8.4 25 1.80 288 500 V23100-V4312-B000 2-1393763-6
15 10.5 47 2.25 112 2000 V23100-V4315-B000 3-1393763-2
24 16.8 47 3.60 288 2000 V23100-V4324-B000 3-1393763-8
DIP version high: 2 form a contact, with diode
5 3.5 14 0.75 125 200 V23100-V4305-B010 1-1393763-9
12 8.4 25 1.80 288 500 V23100-V4312-B010 2-1393763-7
15 10.5 47 2.25 112 2000 V23100-V4315-B010 3-1393763-3
24 16.8 47 3.60 288 2000 V23100-V4324-B010 3-1393763-9
DIP version high: 1 form c contact, with diode
5 3.5 14.5 0.75 125 200 V23100-V4305-C010 2-1393763-2
12 8.4 23.5 1.80 288 500 V23100-V4312-C010 3-1393763-0
15 10.5 14.5 2.25 112 2000 V23100-V4315-C010 3-1393763-6
24 16.8 49.0 3.60 288 2000 V23100-V4324-C010 4-1393763-2
DIP version high: 1 form c contact, with diode and electrostatic shield
5 3.5 14.5 0.75 125 200 V23100-V4305-C011 2-1393763-3
12 8.4 23.5 1.80 288 500 V23100-V4312-C011 3-1393763-1
15 10.5 14.5 2.25 112 2000 V23100-V4315-C011 3-1393763-7
24 16.8 49.0 3.60 288 2000 V23100-V4324-C011 4-1393763-3
UI = Minimum voltage at 23 °C after
preenergizing with nominal
voltage without contact current
UII = Maximum continous voltage at 23 °C
The operating voltage limits UI and UII depend on the
temperature according to the formula:
UI tamb = KI · UI 23 °C
and
UII tamb = KIl · UIl 23 °C
tamb = Ambient temperature
UI tamb = Minimum voltage at ambient
temperature, tamb
UII tamb = Maximum voltage at ambient
temperature, tamb
kI , kII = Factors (dependent on temperature),
see diagram
Ambient temperature tamb [°C]
108-98011 Rev. C
All specications subject to change. Consult Tyco Electronics for latest specications. 8 of 13
Telecom-, Signal and RF Relays
Reed V23100-V4 Relay
AXICOM
SIL version
mm inch
L
W
H
19.80
-
0.2
5.08
-
0.2
7.80
-
0.2
0.780
-
0.008
0.200
-
0.008
0.307
-
0.008
T
Tw
Tz
3.50 ± 0.2
0.60 ± 0.1
0.25 ± 0.1
0.138 ± 0.008
0.024 ± 0.004
0.010 ± 0.004
Dimensions Dimensions in mm
Mounting hole layout
Top view
Terminal assignment
Top view
SIL version
1 form a
standard
A000
1 form a
with diode
A010
108-98011 Rev. C
All specications subject to change. Consult Tyco Electronics for latest specications. 9 of 13
Telecom-, Signal and RF Relays
Reed V23100-V4 Relay
AXICOM
Coil Data (values at 23 °C) Ordering Information
Nominal
voltage
Unom
Operate/set voltage range Release/
reset voltage
Minimum
Coil
power
Coil
Resistance
Relay
code
Tyco part
number
Minimum
voltage Umin
Maximum
voltage Umax
Vdc Vdc Vdc Vdc mW Ω / ± 10 %
SIL version: 1 form a contact
5 3.5 22 0.75 50 500 V23100-V4505-A000 4-1393763-4
12 8.4 33 1.80 144 1000 V23100-V4512-A000 4-1393763-7
15 10.5 44 2.25 112 2000 V23100-V4515-A000 4-1393763-9
24 16.8 44 3.60 288 2000 V23100-V4524-A000 5-1393763-1
SIL version: 1 form a contact with diode
5 3.5 22 0.75 50 500 V23100-V4505-A010 4-1393763-5
12 8.4 33 1.80 144 1000 V23100-V4512-A010 4-1393763-8
15 10.5 44 2.25 112 2000 V23100-V4515-A010 5-1393763-0
24 16.8 44 3.60 288 2000 V23100-V4524-A010 5-1393763-2
108-98011 Rev. C
All specications subject to change. Consult Tyco Electronics for latest specications. 10 of 13
Telecom-, Signal and RF Relays
Reed V23100-V4 Relay
AXICOM
SIL version
mm inch
L
W
H
15.20
-
0.2
3.80
-
0.2
6.80
-
0.2
0.780
-
0.008
0.200
-
0.008
0.307
-
0.008
Tw
Tz
0.50 ± 0.1
0.25 ± 0.1
0.024 ± 0.004
0.010 ± 0.004
Dimensions Dimensions in mm
Mounting hole layout
Top view
Terminal assignment
Top view
Mini SIL version
1 form a
standard
A000
1 form a
with diode
A010
Coil Data (values at 23 °C) Ordering Information
Nominal
voltage
Unom
Operate/set voltage range Release/
reset voltage
Minimum
Coil
power
Coil
Resistance
Relay
code
Tyco part
number
Minimum
voltage Umin
Maximum
voltage Umax
Vdc Vdc Vdc Vdc mW Ω / ± 10 %
SIL version: 1 form a contact
5 3.5 13.6 0.75 50 500 V23100-V4605-A000 1422026-2
12 8.4 21.6 1.80 205 700 V23100-V4612-A000 1422026-3
SIL version: 1 form a contact with diode
5 3.5 13.6 0.75 50 500 V23100-V4605-A010 1422026-5
12 8.4 21.6 1.80 205 700 V23100-V4612-A010 1422026-6
108-98011 Rev. C
All specications subject to change. Consult Tyco Electronics for latest specications. 11 of 13
Telecom-, Signal and RF Relays
Reed V23100-V4 Relay
AXICOM
Type of relay DIP version SIL version Mini SIL Version
Type of contact/s 1 form a 2 form a 1 form c 1 form a 1 form a
Contact material Ruthenium
Maximum continuous current 1 A 1.2 A 1 A 1 A
Maximum switching current 0.5 A 0.25 A 0.5 A 0.5 A
Maximum switching voltage
at nominal voltage: 5 Vdc
12-24 Vdc
200 Vdc / Vac peak
200 Vdc / Vac peak
175 Vdc
175 Vdc peak
200 Vdc / Vac
200 Vdc / Vac
200 Vdc / Vac peak
200 Vdc / Vac peak
Maximum switching capacity
DC voltage
AC voltage
10 W
10 VA
3 W
3 VA
10 W
10 VA
10 W
10 VA
Initial contact resistance /
measuring condition: <150 mΩ
Electrical endurance at 12 V / 10 mA
at 24 V / 400 mA
5 x 107
5 x 106
Type of relay DIP version SIL version Mini SIL Version
Type of contact/s 1 form a 2 form a 1 form c 1 form a 1 form a
Maximum operate time (including bounce) 0.75 ms 1.1 ms 0.75 ms 0.75 ms
Maximum release time 0.15 ms 1.6 ms 0.15 ms 0.15 ms
Operating temperature range -40 °C ... +85 °C
Storage temperature -40 °C ... + 95 °C
Thermal resistance Approx. 75 K / W
Maximum permissible coil temperature 105 °C
Vibration resistance (function) 30 G
10 to 2000 Hz
30 G
50 to 2000 Hz
30 G
10 to 2000 Hz
30 G
10 to 2000 Hz
Shock resistance, half sinus, 11 ms 150 G 50 G 150 G 50 G
Degree of protection immersion cleanable, IP 67
Mounting position any
Resistance to soldering heat 265 °C / 10 s
Insulation resistance at 500 Vdc contact coil > 109Ω
Dielectric test voltage (1 min)
contact / coil
contact / contact
1500 Vdc
250 Vdc
1500 Vdc
200 Vdc
1500 Vdc
250 Vdc
1500 Vdc
225 Vdc
Capacitance
between coil and contacts
between adjacent contact sets
between open contacts
max. 2 pF
max. 1 pF
max. 1 pF
Contact Data
General Data
Insulation
High Frequency Data
108-98011 Rev. C
All specications subject to change. Consult Tyco Electronics for latest specications. 12 of 13
Telecom-, Signal and RF Relays
Reed V23100-V4 Relay
AXICOM
IM Relays
4th generation slim line – low prole polarized 2 c/o telecom signal relay
with bifurcated contacts, available as non latching or latching relay with
1 coil. Nominal voltage range from 1.5 ... 24 V, coil power consumption of 50 ...
200 mW, latching relays with 1 coil 100 mW. The IM relay is available as
through hole and surface mount type (J-Legs and Gull Wings) and capable
to switch loads up to 60 W/62,5 VA. It is currently the only 2 A rated 4G
relay on the market. Dielectric strength fullls the Telcordia requirements
according GR 1089 (2,5 kV – 2 / 10 µs) and FCC part 68 (1,5 kV – 10 / 160 µs).
The IM relay is tested according CECC/IECQ and certied in accordance
with IEC/EN 60950 and UL 60950.
Dimensions approx. 10 x 6 mm board space and 5.65 mm height.
P2 Relays
3rd generation polarized 2 c/o telecom relay with bifurcated contacts,
available as non latching or latching relay with 1 or 2 coils. Nominal voltage
range from 3 ... 24 V, coil power consumption 140 mW, latching relays
with 1 coil 70 mW. The P2 Relay is available as through hole or surface
mount type and capable to switch currents up to 5 A. Dielectric strength
fullls the Telcordia requirements according GR 1089 (2,5 kV – 2 / 10 µs)
and FCC part 68 (1,5 kV – 10 / 160 µs). The P2 relay is tested according
CECC/IECQ and certied in accordance with IEC/EN 60950 and UL 60950.
Dimensions approx. 15 x 7,5 mm board space and 10 mm height.
FX2 Relays
3rd generation polarized 2 c/o telecom relay with bifurcated contacts,
available as non latching or latching relay with 1 coil. Nominal voltage
range from 3 ... 48 V, coil power consumption of 80 ... 260 mW for the high
sensitive version, 140... 300 mW for the standard version, latching relays
with 1 coil 100 mW. The FX2 relay is available as through hole type and
capable to switch loads up to 60 W/62,5 VA. Dielectric strength fullls the
Telcordia requirements according GR 1089 (2,5 kV – 2 / 10 µs) and FCC
part 68 (1,5 kV – 10 / 160 µs). The FX2 relay is tested according CECC/
IECQ and certied in accordance with IEC/EN 60950 and UL 60950.
Dimensions approx. 15 x 7,5 mm board space and 10,7 mm height.
FT2 / FU2 Relays
3rd generation non polarized, non latching 2 c/o telecom relay with bifurca-
ted contacts. Nominal voltage range from 3 ... 48 V, coil power consumption
200 ... 300 mW. Most sensitive 48 V relay. Available as through hole and
surface mount type. Dielectric strength fullls the Telcordia requirements
according GR 1089 (2,5 kV – 2 / 10 µs) and FCC part 68 (1,5 kV – 10 /
160 µs). The FT2/FU2 relay is tested according CECC/IECQ and certied
in accordance with IEC/EN 60950 and UL 60950.
Dimensions approx. 15 x 7,5 mm board space and 10 mm height.
FP2 Relays
3rd generation polarized 2 c/o telecom relay with bifurcated contacts,
available as non latching or latching relay with 1 or 2 coils. Nominal voltage
range from 3 ... 48 V, coil power consumption of 80 ... 260 mW for the
high sensitive version, 140... 300 mW for the standard version, latching
relays with 1 coil 100 mW.. The FP2 Relay is available as through hole
type and capable to switch loads up to 60 W/62,5 VA. Dielectric strength
fullls FCC part 68 (1,5 kV – 10 / 160 µs). The FP2 is tested according
CECC/IECQ approved.
Dimensions approx. 14 x 9 mm board space and 5 mm height.
MT2
2nd generation non polarized, non latching 2 c/o telecom and si-
gnal relay with bifurcated contacts. Nominal voltage range from 3
... 48 V, coil power consumption 150/200/300/400 and 550 mW.
Dielectric strength fulfills the requirements according FCC part 68
(1,5 kV – 10 / 160 µs).
Dimensions approx. 20 x 10 mm board space and 11 mm height.
D2n Relays
2nd generation non polarized 2 c/o relay for telecom and various other ap-
plications. Nominal voltage range from 3 ... 48 V, coil power consumption from
150 .... 500 mW. The D2n relay is capable to switch currents up to 3 A. Dielectric
strength fullls the requirements according FCC part 68 (1,5 kV – 10 / 160 µs).
Dimensions approx. 20 x10 mm board space and 11 mm height.
P1 Relays
Extremely sensitive, polarized 1 c/o relay with bifurcated contacts for a
wide range of applications, available as non latching or latching relay with
1 or 2 coils. Nominal voltage range from 3 ... 24 V, coil power consumption
65 mW, latching relays with 1 coil 30 mW. The P1 relay is available as
through hole or surface mount type and capable to switch currents up to 1
A. Dielectric strength fullls the requirements according FCC part 68 (1,5
kV – 10 / 160 µs). Dimensions approx. 13 x 7,6 mm board space and 7
mm height for THT or 8 mm height for SMT version.
W11 Relays
Low cost, non polarized 1 c/o relay for various applications. Nominal
voltage range from 3 ... 24 V, coil power consumption 450 mW, sensitive
versions 200 mW. The W11 relay is capable to switch currents up to 3 A.
Dielectric strength 1000 Vrms.
Dimensions approx. 15,6 x 10,6 mm board space and 11,5 mm height.
Reed Relays
High sensitive, non polarized relay for telecom and various other applica-
tions, available with 1 n/o, 2 n/o or 1c/o contacts. Nominal voltage range
from 5 ... 24 V, coil power consumption 50...280 mW for 1 n/o and 125 ...
280 mW for 2 n/o or 1 c/o versions. Reedrelays are available in DIP or
SIL housing and capable to switch currents up to 0,5 A. Integrated diode
and/or electrostatic shield optional. Dielectric strength 1500 Vdc. Dimen-
sions approx. 19,3 x 7 mm board space and 5 ... 7,5 mm height for DIP or
19,8 x 5 mm board space and 7,8 mm height for SIL version.
Cradle Relays
Extremely reliable and mature relay family of 1st generation for various signal
switching applications. Available as non polarized, polarized / latching and
relay with AC coil. The benet is the possibility of combining various contact
sets from 1 up to 6 poles, single and bifurcated contacts, different contact
materials with a coil voltage range from 1,5 Vdc to 220 Vac. Cradle relays are
available as dust protected and hermetically sealed versions, with plug in or
solder terminals and are capable to switch currents up to 5 A. Forcibly guided
(linked) contact sets optional. Dielectric strength 500 Vrms. Dimensions from
approx. 19 x 24 to 19x35 mm board space and 30 mm height.
Other Relays
We offer a variety of different relay families for maintenance and replace-
ment purposes. These relays are up to 60 years old now, such as Card
Relay SN (V23030 series), Small General Purpose Relay (V23006 series),
Small Polarized Relay (V23063 ... V23067 and V23163 ... V23167 series).
Accessories like sockets, hold down springs, etc. optional.
High Frequency Relays
HF3 / HF3S / HF6 series RF relays offering excellent RF characteristics
in a small package. All HF series relays are suitable for SMD soldering
processes. Available as non latching or latching versions with 1 or 2 coils
and a nominal coil voltage range from 3 … 24 V, a coil power consumption
of 140 mW or 70 mW (single coil latching types).
HF3: Low cost RF relay suitable up to 3 GHz. Impedance 50 and 75 Ohm.
50 W hot switching and 50 W RF power carry capability.
Dimensions 14.6 x 7.3 x 10.3 mm.
HF3S: High performance, high power RF relay suitable up to 3 GHz,
50 W hot switching and 150 W RF power carry capability.
Dimensions 15 x 7.6 x 10.6 mm.
HF6: High performance, high power RF relay suitable up to 6 GHz,
50 W hot switching and 50 W RF power carry capability.
Dimensions 15 x 7.6 x 10.6 mm.
108-98011 Rev. C
Telecom-, Signal and RF Relays
Reed V23100-V4 Relay
AXICOM
Telecom-, Signal and RF Relays
AXICOM
Tyco Electronics Logistics AG
Werk Axicom Au
Seestrasse 295
CH-8804 Au-Wädenswil / Switzerland
Phone +41 44 782 91 11
Fax +41 44 782 90 00
E-mail: axicom@tycoelectronics.com
Tyco Electronics
Paulsternstrasse 26
D-13629 Berlin / Germany
Phone +49 30 386 38573
Fax +49 30 386 38575
E-mail: axicom@tycoelectronics.com
Tyco Electronics EC Trutnov s.r.o.
Komenského 821
CZ-541 01 Trutnov / Czech Republic
E-mail: axicom@tycoelectronics.com
Tyco Electronics Corporation
POB 3608,
Harrisburg, PA 17105, USA
Phone +1 800-522-6752
